-# SOME DESCRIPTIVE TITLE.
-# Copyright (C) 2013
-# This file is distributed under the same license as the Cura package.
-# Ilya Kulakov <kulakov.ilya@gmail.com>, 2013.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: Cura\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2014-07-28 17:57+0200\n"
-"PO-Revision-Date: 2014-09-29 16:02+0800\n"
-"Last-Translator: \n"
-"Language-Team: coloz <clz@clz.me>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Poedit 1.6.8\n"
-"Language: zh_Hans_CN\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-#: Cura/gui/app.py:144 Cura/gui/mainWindow.py:566
-msgid "A new version of Cura is available, would you like to download?"
-msgstr ""
-
-#: Cura/gui/app.py:144 Cura/gui/mainWindow.py:566
-msgid "New version available"
-msgstr ""
-
-#: Cura/gui/configWizard.py:223
-msgid "Add new machine wizard"
-msgstr "添加机型"
-
-#: Cura/gui/configWizard.py:225
-msgid "First time run wizard"
-msgstr "配置向导"
-
-#: Cura/gui/configWizard.py:226
-msgid "Welcome, and thanks for trying Cura!"
-msgstr ""
-
-#: Cura/gui/configWizard.py:228
-msgid "This wizard will help you in setting up Cura for your machine."
-msgstr "向导将协助你，为你的机型配置Cura"
-
-#: Cura/gui/configWizard.py:262
-msgid "Select which Printrbot machine you have:"
-msgstr ""
-
-#: Cura/gui/configWizard.py:299
-msgid "The following pre-defined machine profiles are available"
-msgstr ""
-
-#: Cura/gui/configWizard.py:300
-msgid ""
-"Note that these profiles are not guaranteed to give good results,\n"
-"or work at all. Extra tweaks might be required.\n"
-"If you find issues with the predefined profiles,\n"
-"or want an extra profile.\n"
-"Please report it at the github issue tracker."
-msgstr ""
-
-#: Cura/gui/configWizard.py:330
-msgid "Cura is now ready to be used!"
-msgstr ""
-
-#: Cura/gui/configWizard.py:335
-msgid ""
-"RepRap machines can be vastly different, so here you can set your own "
-"settings."
-msgstr ""
-
-#: Cura/gui/configWizard.py:336
-msgid ""
-"Be sure to review the default profile before running it on your machine."
-msgstr ""
-
-#: Cura/gui/configWizard.py:337
-msgid ""
-"If you like a default profile for your machine added,\n"
-"then make an issue on github."
-msgstr ""
-
-#: Cura/gui/configWizard.py:339
-msgid "You will have to manually install Marlin or Sprinter firmware."
-msgstr ""
-
-#: Cura/gui/configWizard.py:341
-msgid "Machine name"
-msgstr "机型名称"
-
-#: Cura/gui/configWizard.py:342
-msgid "Machine width (mm)"
-msgstr "构建宽度"
-
-#: Cura/gui/configWizard.py:343
-msgid "Machine depth (mm)"
-msgstr "构建深度"
-
-#: Cura/gui/configWizard.py:344
-msgid "Machine height (mm)"
-msgstr "构建高度"
-
-#: Cura/gui/configWizard.py:345 Cura/util/profile.py:175
-msgid "Nozzle size (mm)"
-msgstr "喷嘴孔径"
-
-#: Cura/gui/configWizard.py:346 Cura/util/profile.py:503
-msgid "Heated bed"
-msgstr "热床"
-
-#: Cura/gui/configWizard.py:347
-msgid "Bed center is 0,0,0 (RoStock)"
-msgstr "平台中心为0,0,0"
-
-#: Cura/gui/configWizard.py:367
-msgid "Select your machine"
-msgstr "设置你的机型"
-
-#: Cura/gui/configWizard.py:368
-msgid "What kind of machine do you have:"
-msgstr ""
-
-#: Cura/gui/configWizard.py:377
-msgid "Other (Ex: RepRap, MakerBot)"
-msgstr "其他机型（如MostFun Sail）"
-
-#: Cura/gui/configWizard.py:380
-msgid ""
-"The collection of anonymous usage information helps with the continued "
-"improvement of Cura."
-msgstr ""
-
-#: Cura/gui/configWizard.py:381
-msgid ""
-"This does NOT submit your models online nor gathers any privacy related "
-"information."
-msgstr ""
-
-#: Cura/gui/configWizard.py:382
-msgid "Submit anonymous usage information:"
-msgstr ""
-
-#: Cura/gui/configWizard.py:383
-msgid "For full details see: http://wiki.ultimaker.com/Cura:stats"
-msgstr ""
-
-#: Cura/gui/configWizard.py:455
-msgid "Select upgraded parts you have"
-msgstr ""
-
-#: Cura/gui/configWizard.py:456
-msgid ""
-"To assist you in having better default settings for your Ultimaker\n"
-"Cura would like to know which upgrades you have in your machine."
-msgstr ""
-
-#: Cura/gui/configWizard.py:458
-msgid "Extruder drive upgrade"
-msgstr ""
-
-#: Cura/gui/configWizard.py:459
-msgid "Heated printer bed (kit)"
-msgstr ""
-
-#: Cura/gui/configWizard.py:460
-msgid "Heated printer bed (self built)"
-msgstr ""
-
-#: Cura/gui/configWizard.py:461
-msgid "Dual extrusion (experimental)"
-msgstr ""
-
-#: Cura/gui/configWizard.py:463
-msgid ""
-"If you have an Ultimaker bought after october 2012 you will have the\n"
-"Extruder drive upgrade. If you do not have this upgrade,\n"
-"it is highly recommended to improve reliability."
-msgstr ""
-
-#: Cura/gui/configWizard.py:464
-msgid ""
-"This upgrade can be bought from the Ultimaker webshop\n"
-"or found on thingiverse as thing:26094"
-msgstr ""
-
-#: Cura/gui/configWizard.py:486
-msgid "Upgrade Ultimaker Firmware"
-msgstr ""
-
-#: Cura/gui/configWizard.py:487
-msgid ""
-"Firmware is the piece of software running directly on your 3D printer.\n"
-"This firmware controls the step motors, regulates the temperature\n"
-"and ultimately makes your printer work."
-msgstr ""
-
-#: Cura/gui/configWizard.py:489
-msgid ""
-"The firmware shipping with new Ultimakers works, but upgrades\n"
-"have been made to make better prints, and make calibration easier."
-msgstr ""
-
-#: Cura/gui/configWizard.py:491
-msgid ""
-"Cura requires these new features and thus\n"
-"your firmware will most likely need to be upgraded.\n"
-"You will get the chance to do so now."
-msgstr ""
-
-#: Cura/gui/configWizard.py:496
-msgid "Do not upgrade to this firmware if:"
-msgstr ""
-
-#: Cura/gui/configWizard.py:497
-msgid "* You have an older machine based on ATMega1280 (Rev 1 machine)"
-msgstr ""
-
-#: Cura/gui/configWizard.py:498
-msgid "* Have other changes in the firmware"
-msgstr ""
-
-#: Cura/gui/configWizard.py:532
-msgid ""
-"It is a good idea to do a few sanity checks now on your Ultimaker.\n"
-"You can skip these if you know your machine is functional."
-msgstr ""
-
-#: Cura/gui/configWizard.py:533
-msgid "Run checks"
-msgstr "运行检测"
-
-#: Cura/gui/configWizard.py:533
-msgid "Skip checks"
-msgstr "跳过检测"
-
-#: Cura/gui/configWizard.py:537
-msgid "Communication:"
-msgstr "通信:"
-
-#: Cura/gui/configWizard.py:538
-msgid "Temperature:"
-msgstr "温度:"
-
-#: Cura/gui/configWizard.py:539
-msgid "Endstops:"
-msgstr ""
-
-#: Cura/gui/configWizard.py:544
-msgid "Show error log"
-msgstr "显示错误日志"
-
-#: Cura/gui/configWizard.py:578
-msgid "Connecting to machine."
-msgstr "正在连接打印机"
-
-#: Cura/gui/configWizard.py:599
-msgid "Cooldown before temperature check."
-msgstr ""
-
-#: Cura/gui/configWizard.py:605 Cura/gui/configWizard.py:612
-msgid "Checking the heater and temperature sensor."
-msgstr ""
-
-#: Cura/gui/configWizard.py:623
-msgid "Please make sure none of the endstops are pressed."
-msgstr ""
-
-#: Cura/gui/configWizard.py:636
-msgid "Temperature measurement FAILED!"
-msgstr ""
-
-#: Cura/gui/configWizard.py:641
-#, python-format
-msgid "Head temperature: %d"
-msgstr ""
-
-#: Cura/gui/configWizard.py:648 Cura/gui/configWizard.py:657
-#, python-format
-msgid "Communication State: %s"
-msgstr ""
-
-#: Cura/gui/configWizard.py:651
-msgid "Failed to establish connection with the printer."
-msgstr ""
-
-#: Cura/gui/configWizard.py:696
-msgid "Please press the right X endstop."
-msgstr ""
-
-#: Cura/gui/configWizard.py:701
-msgid "Please press the left X endstop."
-msgstr ""
-
-#: Cura/gui/configWizard.py:706
-msgid "Please press the front Y endstop."
-msgstr ""
-
-#: Cura/gui/configWizard.py:711
-msgid "Please press the back Y endstop."
-msgstr ""
-
-#: Cura/gui/configWizard.py:716
-msgid "Please press the top Z endstop."
-msgstr ""
-
-#: Cura/gui/configWizard.py:721
-msgid "Please press the bottom Z endstop."
-msgstr ""
-
-#: Cura/gui/configWizard.py:727
-msgid "Checkup finished"
-msgstr ""
-
-#: Cura/gui/configWizard.py:770
-msgid "Calibrating the Steps Per E requires some manual actions."
-msgstr ""
-
-#: Cura/gui/configWizard.py:771
-msgid "First remove any filament from your machine."
-msgstr ""
-
-#: Cura/gui/configWizard.py:772
-msgid ""
-"Next put in your filament so the tip is aligned with the\n"
-"top of the extruder drive."
-msgstr ""
-
-#: Cura/gui/configWizard.py:773
-msgid "We'll push the filament 100mm"
-msgstr ""
-
-#: Cura/gui/configWizard.py:774
-msgid "Extrude 100mm filament"
-msgstr ""
-
-#: Cura/gui/configWizard.py:775
-msgid ""
-"Now measure the amount of extruded filament:\n"
-"(this can be more or less then 100mm)"
-msgstr ""
-
-#: Cura/gui/configWizard.py:776
-msgid "Save"
-msgstr "保存"
-
-#: Cura/gui/configWizard.py:777
-msgid "This results in the following steps per E:"
-msgstr ""
-
-#: Cura/gui/configWizard.py:779
-msgid "You can repeat these steps to get better calibration."
-msgstr ""
-
-#: Cura/gui/configWizard.py:782
-msgid ""
-"If you still have filament in your printer which needs\n"
-"heat to remove, press the heat up button below:"
-msgstr ""
-
-#: Cura/gui/configWizard.py:783
-msgid "Heatup for filament removal"
-msgstr ""
-
-#: Cura/gui/configWizard.py:808 Cura/gui/configWizard.py:842
-msgid ""
-"Error: Failed to open serial port to machine\n"
-"If this keeps happening, try disconnecting and reconnecting the USB cable"
-msgstr ""
-
-#: Cura/gui/firmwareInstall.py:44
-msgid ""
-"I am sorry, but Cura does not ship with a default firmware for your machine "
-"configuration."
-msgstr ""
-
-#: Cura/gui/firmwareInstall.py:44 Cura/gui/firmwareInstall.py:48
-#: Cura/gui/firmwareInstall.py:103 Cura/gui/mainWindow.py:508
-msgid "Firmware update"
-msgstr "固件更新"
-
-#: Cura/gui/firmwareInstall.py:48
-msgid ""
-"Cura only supports firmware updates for ATMega2560 based hardware.\n"
-"So updating your RepRap with Cura might or might not work."
-msgstr ""
-"Cura仅支持基于ATmega2560的机型升级\n"
-"升级固件后也许大概有可能你的打印机无法正常工作"
-
-#: Cura/gui/firmwareInstall.py:56
-msgid "OK"
-msgstr "确定"
-
-#: Cura/gui/firmwareInstall.py:77
-msgid "Reading firmware..."
-msgstr "读取固件..."
-
-#: Cura/gui/firmwareInstall.py:79
-msgid "Connecting to machine..."
-msgstr "连接到打印机..."
-
-#: Cura/gui/firmwareInstall.py:83
-msgid ""
-"Please connect the printer to\n"
-"your computer with the USB cable."
-msgstr ""
-
-#: Cura/gui/firmwareInstall.py:102
-msgid ""
-"Failed to find machine for firmware upgrade\n"
-"Is your machine connected to the PC?"
-msgstr ""
-
-#: Cura/gui/firmwareInstall.py:107
-msgid "Uploading firmware..."
-msgstr "固件上传中"
-
-#: Cura/gui/firmwareInstall.py:110
-#, python-format
-msgid ""
-"Done!\n"
-"Installed firmware: %s"
-msgstr ""
-"完成!\n"
-"成功写入固件: %s"
-
-#: Cura/gui/firmwareInstall.py:112
-msgid "Failed to write firmware.\n"
-msgstr "固件写入失败\n"
-
-#: Cura/gui/mainWindow.py:66
-msgid "Load model file...\tCTRL+L"
-msgstr "读取模型文件...\tCTRL+L"
-
-#: Cura/gui/mainWindow.py:68
-msgid "Save model...\tCTRL+S"
-msgstr "保存模型...\tCTRL+S"
-
-#: Cura/gui/mainWindow.py:70
-msgid "Reload platform\tF5"
-msgstr "重新载入模型\tF5"
-
-#: Cura/gui/mainWindow.py:72
-msgid "Clear platform"
-msgstr "清除所有模型"
-
-#: Cura/gui/mainWindow.py:76
-msgid "Print...\tCTRL+P"
-msgstr "打印...\tCTRL+P"
-
-#: Cura/gui/mainWindow.py:78 Cura/gui/sceneView.py:279
-msgid "Save GCode..."
-msgstr "保存GCode..."
-
-#: Cura/gui/mainWindow.py:80
-msgid "Show slice engine log..."
-msgstr "显示切片引擎记录..."
-
-#: Cura/gui/mainWindow.py:84
-msgid "Open Profile..."
-msgstr "打开配置文件..."
-
-#: Cura/gui/mainWindow.py:87
-msgid "Save Profile..."
-msgstr "保存配置文件..."
-
-#: Cura/gui/mainWindow.py:90
-msgid "Load Profile from GCode..."
-msgstr "从Gcode中读取配置文件..."
-
-#: Cura/gui/mainWindow.py:94
-msgid "Reset Profile to default"
-msgstr "恢复默认配置..."
-
-#: Cura/gui/mainWindow.py:99
-msgid "Preferences...\tCTRL+,"
-msgstr "偏好配置......\tCTRL+,"
-
-#: Cura/gui/mainWindow.py:101 Cura/gui/mainWindow.py:434
-msgid "Machine settings..."
-msgstr "机型设置..."
-
-#: Cura/gui/mainWindow.py:107
-msgid "Recent Model Files"
-msgstr "最近使用的模型文件"
-
-#: Cura/gui/mainWindow.py:114
-msgid "Recent Profile Files"
-msgstr "最近使用的配置文件"
-
-#: Cura/gui/mainWindow.py:120
-msgid "Quit"
-msgstr "退出"
-
-#: Cura/gui/mainWindow.py:122
-msgid "File"
-msgstr "文件"
-
-#: Cura/gui/mainWindow.py:130
-msgid "Minecraft map import..."
-msgstr "导入Minecraft地图..."
-
-#: Cura/gui/mainWindow.py:134
-msgid "PID Debugger..."
-msgstr "PID调试器..."
-
-#: Cura/gui/mainWindow.py:137
-msgid "Copy profile to clipboard"
-msgstr "复制配置到剪切板"
-
-#: Cura/gui/mainWindow.py:141
-msgid "Print all at once"
-msgstr "同时打印多个模型"
-
-#: Cura/gui/mainWindow.py:143
-msgid "Print one at a time"
-msgstr "逐个打印模型"
-
-#: Cura/gui/mainWindow.py:150
-msgid "Tools"
-msgstr "工具"
-
-#: Cura/gui/mainWindow.py:156 Cura/util/profile.py:175
-msgid "Machine"
-msgstr "机型"
-
-#: Cura/gui/mainWindow.py:159
-msgid "Switch to quickprint..."
-msgstr "切换到快速打印模式..."
-
-#: Cura/gui/mainWindow.py:163
-msgid "Switch to full settings..."
-msgstr "切换到完整配置模式..."
-
-#: Cura/gui/mainWindow.py:168
-msgid "Open expert settings...\tCTRL+E"
-msgstr "额外设置...\tCTRL+E"
-
-#: Cura/gui/mainWindow.py:172
-msgid "Run first run wizard..."
-msgstr "运行首次使用向导..."
-
-#: Cura/gui/mainWindow.py:174
-msgid "Run bed leveling wizard..."
-msgstr "运行平台调平向导..."
-
-#: Cura/gui/mainWindow.py:176
-msgid "Run head offset wizard..."
-msgstr "运行多喷头校正向导..."
-
-#: Cura/gui/mainWindow.py:179
-msgid "Expert"
-msgstr "专业设置"
-
-#: Cura/gui/mainWindow.py:182
-msgid "Online documentation..."
-msgstr "在线文档..."
-
-#: Cura/gui/mainWindow.py:184
-msgid "Report a problem..."
-msgstr "问题提交..."
-
-#: Cura/gui/mainWindow.py:186
-msgid "Check for update..."
-msgstr "检查更新..."
-
-#: Cura/gui/mainWindow.py:188
-msgid "Open YouMagine website..."
-msgstr "打开YouMagine网站..."
-
-#: Cura/gui/mainWindow.py:190
-msgid "About Cura..."
-msgstr "关于Cura"
-
-#: Cura/gui/mainWindow.py:192
-msgid "Help"
-msgstr "帮助"
-
-#: Cura/gui/mainWindow.py:343
-msgid ""
-"For \"One at a time\" printing, you need to have entered the correct head "
-"size and gantry height in the machine settings"
-msgstr ""
-
-#: Cura/gui/mainWindow.py:343
-msgid "One at a time warning"
-msgstr ""
-
-#: Cura/gui/mainWindow.py:440
-msgid "Install default firmware..."
-msgstr "安装默认固件..."
-
-#: Cura/gui/mainWindow.py:443
-msgid "Install custom firmware..."
-msgstr "安装自定义固件"
-
-#: Cura/gui/mainWindow.py:447
-msgid "Select profile file to load"
-msgstr ""
-
-#: Cura/gui/mainWindow.py:459
-msgid "Select gcode file to load profile from"
-msgstr ""
-
-#: Cura/gui/mainWindow.py:474
-msgid ""
-"No profile found in GCode file.\n"
-"This feature only works with GCode files made by Cura 12.07 or newer."
-msgstr ""
-
-#: Cura/gui/mainWindow.py:474
-msgid "Profile load error"
-msgstr ""
-
-#: Cura/gui/mainWindow.py:478
-msgid "Select profile file to save"
-msgstr ""
-
-#: Cura/gui/mainWindow.py:488
-msgid ""
-"This will reset all profile settings to defaults.\n"
-"Unless you have saved your current profile, all settings will be lost!\n"
-"Do you really want to reset?"
-msgstr ""
-
-#: Cura/gui/mainWindow.py:488
-msgid "Profile reset"
-msgstr ""
-
-#: Cura/gui/mainWindow.py:508
-msgid ""
-"Warning: Installing a custom firmware does not guarantee that you machine "
-"will function correctly, and could damage your machine."
-msgstr ""
-
-#: Cura/gui/mainWindow.py:509
-msgid "Open firmware to upload"
-msgstr ""
-
-#: Cura/gui/mainWindow.py:569
-msgid "You are running the latest version of Cura!"
-msgstr "你正在运行最新版本的的Cura!"
-
-#: Cura/gui/mainWindow.py:569
-msgid "Awesome!"
-msgstr ""
-
-#: Cura/gui/mainWindow.py:624
-msgid "Plugins"
-msgstr "插件"
-
-#: Cura/gui/pluginPanel.py:27
-msgid "Plugins:"
-msgstr "插件:"
-
-#: Cura/gui/pluginPanel.py:31
-msgid "Open plugin location"
-msgstr "打开本地插件"
-
-#: Cura/gui/pluginPanel.py:32
-msgid "Enabled plugins"
-msgstr "使能插件"
-
-#: Cura/gui/pluginPanel.py:134
-msgid "You need to select a plugin before you can add anything."
-msgstr ""
-
-#: Cura/gui/pluginPanel.py:134
-msgid "Error: no plugin selected"
-msgstr "错误:没有插件可供选择"
-
-#: Cura/gui/preferencesDialog.py:28
-msgid "Print window"
-msgstr "打印窗口"
-
-#: Cura/gui/preferencesDialog.py:31
-msgid "Colours"
-msgstr "颜色"
-
-#: Cura/gui/preferencesDialog.py:37 Cura/util/profile.py:478
-msgid "Language"
-msgstr "语言"
-
-#: Cura/gui/preferencesDialog.py:40
-msgid "Filament settings"
-msgstr "打印丝"
-
-#: Cura/gui/preferencesDialog.py:50
-msgid "Cura settings"
-msgstr "Cura设置"
-
-#: Cura/gui/preferencesDialog.py:84
-msgid "Machine settings"
-msgstr "机型设置"
-
-#: Cura/gui/preferencesDialog.py:95
-msgid "Printer head size"
-msgstr "打印头尺寸"
-
-#: Cura/gui/preferencesDialog.py:103
-#, python-format
-msgid "Extruder %d"
-msgstr "挤出机 %d"
-
-#: Cura/gui/preferencesDialog.py:107
-msgid "Communication settings"
-msgstr "通信设置"
-
-#: Cura/gui/preferencesDialog.py:154
-msgid "Cannot remove the last machine configuration in Cura"
-msgstr ""
-
-#: Cura/gui/preferencesDialog.py:154
-msgid "Machine remove error"
-msgstr "机型移除错误"
-
-#: Cura/gui/preferencesDialog.py:168
-msgid "Enter the new name:"
-msgstr "输入新的名称:"
-
-#: Cura/gui/preferencesDialog.py:168
-msgid "Change machine name"
-msgstr "更改机型名称"
-
-#: Cura/gui/printWindow.py:33 Cura/gui/printWindow.py:312
-#, python-format
-msgid "Printing on %s"
-msgstr "%s 正在打印"
-
-#: Cura/gui/printWindow.py:324
-msgid ""
-"Your computer is running on battery power.\n"
-"Connect your computer to AC power or your print might not finish."
-msgstr ""
-
-#: Cura/gui/printWindow.py:334
-msgid ""
-"InfoLine from printer connection\n"
-"InfoLine from dialog\n"
-"Extra line\n"
-"More lines for layout\n"
-"More lines for layout\n"
-"More lines for layout"
-msgstr ""
-
-#: Cura/gui/printWindow.py:336
-msgid "Connect"
-msgstr "连接"
-
-#: Cura/gui/printWindow.py:338 Cura/gui/sceneView.py:65
-msgid "Print"
-msgstr "打印"
-
-#: Cura/gui/printWindow.py:339
-msgid "Pause"
-msgstr "暂停"
-
-#: Cura/gui/printWindow.py:340
-msgid "Cancel print"
-msgstr "取消打印"
-
-#: Cura/gui/printWindow.py:341
-msgid "Error log"
-msgstr "错误日志"
-
-#: Cura/gui/sceneView.py:64
-msgid "Load"
-msgstr "Load"
-
-#: Cura/gui/sceneView.py:69
-msgid "Rotate"
-msgstr "Rotate"
-
-#: Cura/gui/sceneView.py:70
-msgid "Scale"
-msgstr "Scale"
-
-#: Cura/gui/sceneView.py:71
-msgid "Mirror"
-msgstr "Mirror"
-
-#: Cura/gui/sceneView.py:73 Cura/gui/sceneView.py:76
-msgid "Reset"
-msgstr "Reset"
-
-#: Cura/gui/sceneView.py:74
-msgid "Lay flat"
-msgstr "Lay flat"
-
-#: Cura/gui/sceneView.py:77
-msgid "To max"
-msgstr "To max"
-
-#: Cura/gui/sceneView.py:79
-msgid "Mirror X"
-msgstr "Mirror X"
-
-#: Cura/gui/sceneView.py:80
-msgid "Mirror Y"
-msgstr "Mirror Y"
-
-#: Cura/gui/sceneView.py:81
-msgid "Mirror Z"
-msgstr "Mirror Z"
-
-#: Cura/gui/sceneView.py:89
-msgid "Scale X"
-msgstr "Scale X"
-
-#: Cura/gui/sceneView.py:91
-msgid "Scale Y"
-msgstr "Scale Y"
-
-#: Cura/gui/sceneView.py:93
-msgid "Scale Z"
-msgstr "Scale Z"
-
-#: Cura/gui/sceneView.py:95
-msgid "Size X (mm)"
-msgstr "Size X (mm)"
-
-#: Cura/gui/sceneView.py:97
-msgid "Size Y (mm)"
-msgstr "Size Y (mm)"
-
-#: Cura/gui/sceneView.py:99
-msgid "Size Z (mm)"
-msgstr "Size Z (mm)"
-
-#: Cura/gui/sceneView.py:101
-msgid "Uniform scale"
-msgstr ""
-
-#: Cura/gui/sceneView.py:104
-msgid "View mode"
-msgstr ""
-
-#: Cura/gui/sceneView.py:104
-msgid "Normal"
-msgstr ""
-
-#: Cura/gui/sceneView.py:104
-msgid "Overhang"
-msgstr ""
-
-#: Cura/gui/sceneView.py:104
-msgid "Transparent"
-msgstr ""
-
-#: Cura/gui/sceneView.py:104
-msgid "X-Ray"
-msgstr ""
-
-#: Cura/gui/sceneView.py:104
-msgid "Layers"
-msgstr ""
-
-#: Cura/gui/sceneView.py:106
-msgid "Share on YouMagine"
-msgstr ""
-
-#: Cura/gui/sceneView.py:204
-msgid "Open 3D model"
-msgstr "打开3D模型"
-
-#: Cura/gui/sceneView.py:229
-msgid "Save 3D model"
-msgstr "保存3D模型"
-
-#: Cura/gui/sceneView.py:276 Cura/gui/sceneView.py:914
-#, python-format
-msgid "Print with %s"
-msgstr ""
-
-#: Cura/gui/sceneView.py:280
-msgid "Slice engine log..."
-msgstr ""
-
-#: Cura/gui/sceneView.py:305 Cura/gui/sceneView.py:917
-msgid "Save toolpath"
-msgstr ""
-
-#: Cura/gui/sceneView.py:351
-msgid "The slicing engine reported the following"
-msgstr ""
-
-#: Cura/gui/sceneView.py:351
-msgid "Engine log..."
-msgstr "引擎记录..."
-
-#: Cura/gui/sceneView.py:490
-msgid "How many copies do you want?"
-msgstr ""
-
-#: Cura/gui/sceneView.py:490
-msgid "Number of copies"
-msgstr ""
-
-#: Cura/gui/sceneView.py:490
-msgid "Multiply"
-msgstr ""
-
-#: Cura/gui/sceneView.py:780
-msgid "Center on platform"
-msgstr ""
-
-#: Cura/gui/sceneView.py:781
-msgid "Delete object"
-msgstr ""
-
-#: Cura/gui/sceneView.py:782
-msgid "Multiply object"
-msgstr ""
-
-#: Cura/gui/sceneView.py:783
-msgid "Split object into parts"
-msgstr ""
-
-#: Cura/gui/sceneView.py:785
-msgid "Dual extrusion merge"
-msgstr ""
-
-#: Cura/gui/sceneView.py:787
-msgid "Delete all objects"
-msgstr ""
-
-#: Cura/gui/sceneView.py:788
-msgid "Reload all objects"
-msgstr ""
-
-#: Cura/gui/sceneView.py:911
-msgid "Toolpath to SD"
-msgstr ""
-
-#: Cura/gui/sceneView.py:1205
-msgid "Overhang view not working due to lack of OpenGL shaders support."
-msgstr ""
-
-#: Cura/gui/simpleMode.py:19
-msgid "High quality print"
-msgstr ""
-
-#: Cura/gui/simpleMode.py:20
-msgid "Normal quality print"
-msgstr ""
-
-#: Cura/gui/simpleMode.py:21
-msgid "Fast low quality print"
-msgstr ""
-
-#: Cura/gui/simpleMode.py:22
-msgid "Thin walled cup or vase"
-msgstr ""
-
-#: Cura/gui/simpleMode.py:32
-msgid "Print support structure"
-msgstr ""
-
-#: Cura/gui/simpleMode.py:37
-msgid "Select a quickprint profile:"
-msgstr ""
-
-#: Cura/gui/simpleMode.py:47
-msgid "Material:"
-msgstr ""
-
-#: Cura/gui/simpleMode.py:51
-msgid "Diameter:"
-msgstr ""
-
-#: Cura/gui/simpleMode.py:57
-msgid "Other:"
-msgstr ""
-
-#: Cura/gui/simpleMode.py:85
-msgid "Exterior Only"
-msgstr ""
-
-#: Cura/gui/tools/imageToMesh.py:28
-msgid "Height (mm)"
-msgstr ""
-
-#: Cura/gui/tools/imageToMesh.py:32
-msgid "Base (mm)"
-msgstr ""
-
-#: Cura/gui/tools/imageToMesh.py:36
-msgid "Width (mm)"
-msgstr ""
-
-#: Cura/gui/tools/imageToMesh.py:40
-msgid "Depth (mm)"
-msgstr ""
-
-#: Cura/gui/tools/projector.py:42
-msgid "Edit"
-msgstr "编辑"
-
-#: Cura/gui/tools/projector.py:43
-msgid "Rectangle"
-msgstr ""
-
-#: Cura/gui/tools/projector.py:44
-msgid "Circle"
-msgstr ""
-
-#: Cura/gui/tools/projector.py:45
-msgid "Draw curves"
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:78
-msgid "Checking token"
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:82
-msgid "Failed to contact YouMagine.com"
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:82 Cura/gui/tools/youmagineGui.py:116
-#: Cura/gui/tools/youmagineGui.py:133 Cura/gui/tools/youmagineGui.py:140
-#: Cura/gui/tools/youmagineGui.py:148 Cura/gui/tools/youmagineGui.py:153
-msgid "YouMagine error."
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:100
-msgid "Cura is now authorized to share on YouMagine"
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:100
-msgid "YouMagine."
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:112
-msgid "Creating new design on YouMagine..."
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:116
-msgid "Failed to create a design, nothing uploaded!"
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:120
-#, python-format
-msgid "Building model %s..."
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:131
-#, python-format
-msgid "Uploading model %s..."
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:133 Cura/gui/tools/youmagineGui.py:140
-#: Cura/gui/tools/youmagineGui.py:148
-#, python-format
-msgid "Failed to upload %s!"
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:137
-#, python-format
-msgid "Uploading file %s..."
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:145
-#, python-format
-msgid "Uploading image %s..."
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:153
-msgid "Failed to upload snapshot!"
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:158
-msgid "Publishing design..."
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:230
-msgid "Request authorization from YouMagine"
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:231
-msgid "Paste token here"
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:237
-msgid ""
-"To share your designs on YouMagine\n"
-"you need an account on YouMagine.com\n"
-"and authorize Cura to access your account."
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:239
-msgid ""
-"This will open a browser window where you can\n"
-"authorize Cura to access your YouMagine account.\n"
-"You can revoke access at any time\n"
-"from YouMagine.com"
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:274
-msgid "Design name"
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:278
-msgid "Publish after upload"
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:279
-msgid "Share!"
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:287
-msgid "Add..."
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:289
-msgid "Webcam..."
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:299
-msgid ""
-"Directly publish the design after uploading.\n"
-"Without this check the design will not be public\n"
-"until you publish it yourself on YouMagine.com"
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:305
-msgid "Design name:"
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:307
-msgid "Description:"
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:309
-msgid "Category:"
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:311
-msgid "License:"
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:314
-msgid "Images:"
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:317
-msgid "Related design files:"
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:340
-msgid "The name cannot be empty"
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:340 Cura/gui/tools/youmagineGui.py:344
-msgid "New design error."
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:344
-msgid "The description cannot be empty"
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:370
-msgid "No webcam found on your system"
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:370
-msgid "Webcam error"
-msgstr ""
-
-#: Cura/gui/util/engineResultView.py:168
-#, python-format
-msgid "Loading toolpath for visualization (%d%%)"
-msgstr ""
-
-#: Cura/gui/util/openglGui.py:242
-msgid "An error has occurred during the 3D view drawing."
-msgstr ""
-
-#: Cura/gui/util/openglGui.py:250
-msgid "3D window error"
-msgstr ""
-
-#: Cura/util/profile.py:170 Cura/util/profile.py:171 Cura/util/profile.py:172
-#: Cura/util/profile.py:200 Cura/util/profile.py:201 Cura/util/profile.py:202
-#: Cura/util/profile.py:204
-msgid "Quality"
-msgstr "打印质量"
-
-#: Cura/util/profile.py:170
-msgid "Layer height (mm)"
-msgstr "层厚(mm)"
-
-#: Cura/util/profile.py:170
-msgid ""
-"Layer height in millimeters.\n"
-"This is the most important setting to determine the quality of your print. "
-"Normal quality prints are 0.1mm, high quality is 0.06mm. You can go up to "
-"0.25mm with an Ultimaker for very fast prints at low quality."
-msgstr ""
-"每层的厚度\n"
-"这是最影响打印质量的设置\n"
-"普通质量可设置为0.2mm，高质量设为0.1mm。\n"
-"降低打印质量可以提升打印速度"
-
-#: Cura/util/profile.py:171
-msgid "Shell thickness (mm)"
-msgstr "壁厚(mm)"
-
-#: Cura/util/profile.py:171
-msgid ""
-"Thickness of the outside shell in the horizontal direction.\n"
-"This is used in combination with the nozzle size to define the number\n"
-"of perimeter lines and the thickness of those perimeter lines."
-msgstr ""
-"水平方向的边缘厚度\n"
-"通常需要结合你的喷嘴孔径设置成相应倍数，这个参数决定了边缘的走线次数和厚度"
-
-#: Cura/util/profile.py:172
-msgid "Enable retraction"
-msgstr "开启回退"
-
-#: Cura/util/profile.py:172
-msgid ""
-"Retract the filament when the nozzle is moving over a none-printed area. "
-"Details about the retraction can be configured in the advanced tab."
-msgstr ""
-"当在非打印区域移动喷头时，适当的回退丝能避免多余的挤出和拉丝\n"
-"在高级设置面板中有更多相关设置"
-
-#: Cura/util/profile.py:173 Cura/util/profile.py:174
-msgid "Fill"
-msgstr "填充"
-
-#: Cura/util/profile.py:173
-msgid "Bottom/Top thickness (mm)"
-msgstr "底层/顶层厚度(mm)"
-
-#: Cura/util/profile.py:173
-msgid ""
-"This controls the thickness of the bottom and top layers, the amount of "
-"solid layers put down is calculated by the layer thickness and this value.\n"
-"Having this value a multiple of the layer thickness makes sense. And keep it "
-"near your wall thickness to make an evenly strong part."
-msgstr ""
-"这个参数控制底层和顶层的厚度，通过层厚和这个参数计算需打印出的实心层的数量\n"
-"这个数值应是层厚的倍数。让这个参数接近你的壁厚，可以让模型强度更均匀"
-
-#: Cura/util/profile.py:174
-msgid "Fill Density (%)"
-msgstr "填充密度(%)"
-
-#: Cura/util/profile.py:174
-msgid ""
-"This controls how densely filled the insides of your print will be. For a "
-"solid part use 100%, for an empty part use 0%. A value around 20% is usually "
-"enough.\n"
-"This won't affect the outside of the print and only adjusts how strong the "
-"part becomes."
-msgstr ""
-"控制填充密度\n"
-"打印实心物体需设置为100%，空心物体设置为0%。通常使用20%填充率\n"
-"这个参数不会影响物体的外观，它一般用来调整物体的强度"
-
-#: Cura/util/profile.py:175
-msgid ""
-"The nozzle size is very important, this is used to calculate the line width "
-"of the infill, and used to calculate the amount of outside wall lines and "
-"thickness for the wall thickness you entered in the print settings."
-msgstr "喷嘴尺寸是相当重要的,它会被用于计算走线宽度、外壁走线次数和厚度"
-
-#: Cura/util/profile.py:176 Cura/util/profile.py:177 Cura/util/profile.py:178
-#: Cura/util/profile.py:179 Cura/util/profile.py:180 Cura/util/profile.py:181
-msgid "Speed and Temperature"
-msgstr "速度和温度"
-
-#: Cura/util/profile.py:176
-msgid "Print speed (mm/s)"
-msgstr "打印速度(mm/s)"
-
-#: Cura/util/profile.py:176
-msgid ""
-"Speed at which printing happens. A well adjusted Ultimaker can reach 150mm/"
-"s, but for good quality prints you want to print slower. Printing speed "
-"depends on a lot of factors. So you will be experimenting with optimal "
-"settings for this."
-msgstr ""
-"打印速度\n"
-"MostFun打印速度最快可达150mm/s，为获得更好的打印质量，我们建议打印速度设为"
-"80mm/s以下\n"
-"打印速度的设置要参考很多因素，你可以根据实际情况调试修改"
-
-#: Cura/util/profile.py:177
-msgid "Printing temperature (C)"
-msgstr "打印温度(C)"
-
-#: Cura/util/profile.py:177 Cura/util/profile.py:178 Cura/util/profile.py:179
-#: Cura/util/profile.py:180
-msgid ""
-"Temperature used for printing. Set at 0 to pre-heat yourself.\n"
-"For PLA a value of 210C is usually used.\n"
-"For ABS a value of 230C or higher is required."
-msgstr ""
-"打印时的喷头温度\n"
-"PLA通常设置为210C\n"
-"ABS通常设置为230C"
-
-#: Cura/util/profile.py:178
-msgid "2nd nozzle temperature (C)"
-msgstr ""
-
-#: Cura/util/profile.py:179
-msgid "3th nozzle temperature (C)"
-msgstr ""
-
-#: Cura/util/profile.py:180
-msgid "4th nozzle temperature (C)"
-msgstr ""
-
-#: Cura/util/profile.py:181
-msgid "Bed temperature (C)"
-msgstr ""
-
-#: Cura/util/profile.py:181
-msgid ""
-"Temperature used for the heated printer bed. Set at 0 to pre-heat yourself."
-msgstr ""
-
-#: Cura/util/profile.py:182 Cura/util/profile.py:183
-msgid "None"
-msgstr ""
-
-#: Cura/util/profile.py:182
-msgid "Touching buildplate"
-msgstr ""
-
-#: Cura/util/profile.py:182
-msgid "Everywhere"
-msgstr ""
-
-#: Cura/util/profile.py:182 Cura/util/profile.py:183 Cura/util/profile.py:184
-#: Cura/util/profile.py:224 Cura/util/profile.py:225 Cura/util/profile.py:226
-#: Cura/util/profile.py:227 Cura/util/profile.py:228
-msgid "Support"
-msgstr "支撑"
-
-#: Cura/util/profile.py:182
-msgid "Support type"
-msgstr "支撑类型"
-
-#: Cura/util/profile.py:182
-msgid ""
-"Type of support structure build.\n"
-"\"Touching buildplate\" is the most commonly used support setting.\n"
-"\n"
-"None does not do any support.\n"
-"Touching buildplate only creates support where the support structure will "
-"touch the build platform.\n"
-"Everywhere creates support even on top of parts of the model."
-msgstr ""
-"支撑结构类型。\n"
-"通常使用\"Touching buildplate\"建立支撑 \n"
-"选择 None 不会建立支撑\n"
-"选择Touching buildplate 仅会生成接触到打印平台的支撑结构\n"
-"选择 Everywhere 会在模型上所有的悬空位置创建支撑结构"
-
-#: Cura/util/profile.py:183 Cura/util/profile.py:232
-msgid "Brim"
-msgstr ""
-
-#: Cura/util/profile.py:183 Cura/util/profile.py:233 Cura/util/profile.py:234
-#: Cura/util/profile.py:235 Cura/util/profile.py:236 Cura/util/profile.py:237
-#: Cura/util/profile.py:238 Cura/util/profile.py:239 Cura/util/profile.py:240
-msgid "Raft"
-msgstr ""
-
-#: Cura/util/profile.py:183
-msgid "Platform adhesion type"
-msgstr "粘附平台"
-
-#: Cura/util/profile.py:183
-msgid ""
-"Different options that help in preventing corners from lifting due to "
-"warping.\n"
-"Brim adds a single layer thick flat area around your object which is easy to "
-"cut off afterwards, and it is the recommended option.\n"
-"Raft adds a thick raster below the object and a thin interface between this "
-"and your object.\n"
-"(Note that enabling the brim or raft disables the skirt)"
-msgstr ""
-"开启这个选项可以防止底面起翘\n"
-"Brim会在模型底边周围增加数圈薄层,推荐使用这个选项\n"
-"Raft会打印模型前打印一个网状底座\n"
-"（注意：开启粘附平台后,会关闭打印开始前的边缘走线功能）"
-
-#: Cura/util/profile.py:184
-msgid "Both"
-msgstr ""
-
-#: Cura/util/profile.py:184
-msgid "First extruder"
-msgstr ""
-
-#: Cura/util/profile.py:184
-msgid "Second extruder"
-msgstr ""
-
-#: Cura/util/profile.py:184
-msgid "Support dual extrusion"
-msgstr ""
-
-#: Cura/util/profile.py:184
-msgid ""
-"Which extruder to use for support material, for break-away support you can "
-"use both extruders.\n"
-"But if one of the materials is more expensive then the other you could "
-"select an extruder to use for support material. This causes more extruder "
-"switches.\n"
-"You can also use the 2nd extruder for soluble support materials."
-msgstr ""
-
-#: Cura/util/profile.py:185 Cura/util/profile.py:186 Cura/util/profile.py:187
-msgid "Dual extrusion"
-msgstr ""
-
-#: Cura/util/profile.py:185
-msgid "Wipe&prime tower"
-msgstr ""
-
-#: Cura/util/profile.py:185
-msgid ""
-"The wipe-tower is a tower printed on every layer when switching between "
-"nozzles.\n"
-"The old nozzle is wiped off on the tower before the new nozzle is used to "
-"print the 2nd color."
-msgstr ""
-
-#: Cura/util/profile.py:186
-msgid "Wipe&prime tower volume per layer (mm3)"
-msgstr ""
-
-#: Cura/util/profile.py:186
-msgid ""
-"The amount of material put in the wipe/prime tower.\n"
-"This is done in volume because in general you want to extrude a\n"
-"certain amount of volume to get the extruder going, independent on the layer "
-"height.\n"
-"This means that with thinner layers, your tower gets bigger."
-msgstr ""
-
-#: Cura/util/profile.py:187
-msgid "Ooze shield"
-msgstr ""
-
-#: Cura/util/profile.py:187
-msgid ""
-"The ooze shield is a 1 line thick shell around the object which stands a few "
-"mm from the object.\n"
-"This shield catches any oozing from the unused nozzle in dual-extrusion."
-msgstr ""
-
-#: Cura/util/profile.py:188 Cura/util/profile.py:189 Cura/util/profile.py:190
-#: Cura/util/profile.py:191 Cura/util/profile.py:192
-msgid "Filament"
-msgstr "打印材料"
-
-#: Cura/util/profile.py:188
-msgid "Diameter (mm)"
-msgstr "直径(mm)"
-
-#: Cura/util/profile.py:188
-msgid ""
-"Diameter of your filament, as accurately as possible.\n"
-"If you cannot measure this value you will have to calibrate it, a higher "
-"number means less extrusion, a smaller number generates more extrusion."
-msgstr ""
-"打印耗材的直径\n"
-"MostFun Sail使用的耗材的直径为1.75mm"
-
-#: Cura/util/profile.py:189
-msgid "Diameter2 (mm)"
-msgstr ""
-
-#: Cura/util/profile.py:189
-msgid ""
-"Diameter of your filament for the 2nd nozzle. Use 0 to use the same diameter "
-"as for nozzle 1."
-msgstr ""
-
-#: Cura/util/profile.py:190
-msgid "Diameter3 (mm)"
-msgstr ""
-
-#: Cura/util/profile.py:190
-msgid ""
-"Diameter of your filament for the 3th nozzle. Use 0 to use the same diameter "
-"as for nozzle 1."
-msgstr ""
-
-#: Cura/util/profile.py:191
-msgid "Diameter4 (mm)"
-msgstr ""
-
-#: Cura/util/profile.py:191
-msgid ""
-"Diameter of your filament for the 4th nozzle. Use 0 to use the same diameter "
-"as for nozzle 1."
-msgstr ""
-
-#: Cura/util/profile.py:192
-msgid "Flow (%)"
-msgstr "流量(%)"
-
-#: Cura/util/profile.py:192
-msgid ""
-"Flow compensation, the amount of material extruded is multiplied by this "
-"value"
-msgstr "流量补偿，最终挤出量是设定的挤出量乘以这个值"
-
-#: Cura/util/profile.py:193 Cura/util/profile.py:194 Cura/util/profile.py:195
-#: Cura/util/profile.py:196 Cura/util/profile.py:197 Cura/util/profile.py:198
-#: Cura/util/profile.py:199
-msgid "Retraction"
-msgstr "回退"
-
-#: Cura/util/profile.py:193
-msgid "Speed (mm/s)"
-msgstr "回退速度(mm/s)"
-
-#: Cura/util/profile.py:193
-msgid ""
-"Speed at which the filament is retracted, a higher retraction speed works "
-"better. But a very high retraction speed can lead to filament grinding."
-msgstr ""
-"回退丝时的速度\n"
-"设定较高的速度能达到较好的效果。但是过高的速度可能会导致丝的磨损"
-
-#: Cura/util/profile.py:194
-msgid "Distance (mm)"
-msgstr "回退长度(mm)"
-
-#: Cura/util/profile.py:194
-msgid ""
-"Amount of retraction, set at 0 for no retraction at all. A value of 4.5mm "
-"seems to generate good results."
-msgstr ""
-"丝回退的长度\n"
-"设置为0时不会回退，在MostFun Sail设置为3mm时效果比较好"
-
-#: Cura/util/profile.py:195
-msgid "Dual extrusion switch amount (mm)"
-msgstr ""
-
-#: Cura/util/profile.py:195
-msgid ""
-"Amount of retraction when switching nozzle with dual-extrusion, set at 0 for "
-"no retraction at all. A value of 16.0mm seems to generate good results."
-msgstr ""
-
-#: Cura/util/profile.py:196
-msgid "Minimum travel (mm)"
-msgstr "最小移动距离(mm)"
-
-#: Cura/util/profile.py:196
-msgid ""
-"Minimum amount of travel needed for a retraction to happen at all. To make "
-"sure you do not get a lot of retractions in a small area."
-msgstr ""
-
-#: Cura/util/profile.py:197
-msgid "Enable combing"
-msgstr "开启梳理"
-
-#: Cura/util/profile.py:197
-msgid ""
-"Combing is the act of avoiding holes in the print for the head to travel "
-"over. If combing is disabled the printer head moves straight from the start "
-"point to the end point and it will always retract."
-msgstr ""
-"梳理功能可以避免喷头移动后产生的孔\n"
-"如果关闭了该功能，打印头会在移动过程中一直处在回退状态"
-
-#: Cura/util/profile.py:198
-msgid "Minimal extrusion before retracting (mm)"
-msgstr "回退前最小挤出量(mm)"
-
-#: Cura/util/profile.py:198
-msgid ""
-"The minimal amount of extrusion that needs to be done before retracting "
-"again if a retraction needs to happen before this minimal is reached the "
-"retraction is ignored.\n"
-"This avoids retracting a lot on the same piece of filament which flattens "
-"the filament and causes grinding issues."
-msgstr ""
-
-#: Cura/util/profile.py:199
-msgid "Z hop when retracting (mm)"
-msgstr "回退时Z轴抬起(mm)"
-
-#: Cura/util/profile.py:199
-msgid ""
-"When a retraction is done, the head is lifted by this amount to travel over "
-"the print. A value of 0.075 works well. This feature has a lot of positive "
-"effect on delta towers."
-msgstr ""
-
-#: Cura/util/profile.py:200
-msgid "Initial layer thickness (mm)"
-msgstr "初始层厚 (mm)"
-
-#: Cura/util/profile.py:200
-msgid ""
-"Layer thickness of the bottom layer. A thicker bottom layer makes sticking "
-"to the bed easier. Set to 0.0 to have the bottom layer thickness the same as "
-"the other layers."
-msgstr ""
-"底层的厚度。较厚的底部能使材料和打印平台粘附得更好。设置为0.0则使用层厚作为初"
-"始层厚度"
-
-#: Cura/util/profile.py:201
-msgid "Initial layer line width (%)"
-msgstr "初始层线宽(%)"
-
-#: Cura/util/profile.py:201
-msgid ""
-"Extra width factor for the extrusion on the first layer, on some printers "
-"it's good to have wider extrusion on the first layer to get better bed "
-"adhesion."
-msgstr ""
-"下沉模型\n"
-"下沉进平台的部分不会被打印出来。当模型底部不平整或者太大时，可以使用这个参"
-"数，切除一部分模型再打印"
-
-#: Cura/util/profile.py:202
-msgid "Cut off object bottom (mm)"
-msgstr "底层切除(mm)"
-
-#: Cura/util/profile.py:202
-msgid ""
-"Sinks the object into the platform, this can be used for objects that do not "
-"have a flat bottom and thus create a too small first layer."
-msgstr ""
-"下沉模型\n"
-"下沉进平台的部分不会被打印出来。当模型底部不平整或者太大时，可以使用这个参"
-"数，切除一部分模型再打印"
-
-#: Cura/util/profile.py:204
-msgid "Dual extrusion overlap (mm)"
-msgstr "两次挤出重叠(mm)"
-
-#: Cura/util/profile.py:204
-msgid ""
-"Add a certain amount of overlapping extrusion on dual-extrusion prints. This "
-"bonds the different colors together."
-msgstr "添加一定的重叠挤出,这样能使两个不同的颜色融合的更好"
-
-#: Cura/util/profile.py:205 Cura/util/profile.py:206 Cura/util/profile.py:207
-#: Cura/util/profile.py:208 Cura/util/profile.py:209
-msgid "Speed"
-msgstr "速度"
-
-#: Cura/util/profile.py:205
-msgid "Travel speed (mm/s)"
-msgstr "移动速度 (mm/s)"
-
-#: Cura/util/profile.py:205
-msgid ""
-"Speed at which travel moves are done, a well built Ultimaker can reach "
-"speeds of 250mm/s. But some machines might miss steps then."
-msgstr ""
-"移动喷头时的速度\n"
-"此移动速度指非打印状态下的移动速度\n"
-"建议不要超过150mm/s,否则可能造成电机丢步"
-
-#: Cura/util/profile.py:206
-msgid "Bottom layer speed (mm/s)"
-msgstr "底层速度 (mm/s)"
-
-#: Cura/util/profile.py:206
-msgid ""
-"Print speed for the bottom layer, you want to print the first layer slower "
-"so it sticks better to the printer bed."
-msgstr ""
-"打印底层的速度\n"
-"这个值通常会设置的很低，这样能使底层和平台粘附的更好"
-
-#: Cura/util/profile.py:207
-msgid "Infill speed (mm/s)"
-msgstr "填充速度 (mm/s)"
-
-#: Cura/util/profile.py:207
-msgid ""
-"Speed at which infill parts are printed. If set to 0 then the print speed is "
-"used for the infill. Printing the infill faster can greatly reduce printing "
-"time, but this can negatively affect print quality."
-msgstr ""
-"打印内部填充时的速度\n"
-"当设置为0时，会使用打印速度作为填充速度。高速打印填充能节省很多打印时间，但是"
-"可能会对打印质量照成一定消极影响"
-
-#: Cura/util/profile.py:208
-msgid "Outer shell speed (mm/s)"
-msgstr "外壳速度 (mm/s)"
-
-#: Cura/util/profile.py:208
-msgid ""
-"Speed at which outer shell is printed. If set to 0 then the print speed is "
-"used. Printing the outer shell at a lower speed improves the final skin "
-"quality. However, having a large difference between the inner shell speed "
-"and the outer shell speed will effect quality in a negative way."
-msgstr ""
-"打印机外壳时的速度\n"
-"当设置为0时，会使用打印速度作为外壳速度\n"
-"使用较低的打印速度可以提高模型打印质量，但是如果外壳和内部的打印速度相差较"
-"大，可能会对打印质量有一些消极影响"
-
-#: Cura/util/profile.py:209
-msgid "Inner shell speed (mm/s)"
-msgstr "内壁速度 (mm/s)"
-
-#: Cura/util/profile.py:209
-msgid ""
-"Speed at which inner shells are printed. If set to 0 then the print speed is "
-"used. Printing the inner shell faster then the outer shell will reduce "
-"printing time. It is good to set this somewhere in between the outer shell "
-"speed and the infill/printing speed."
-msgstr ""
-"打印内壁时的速度\n"
-"当设置为0时，会使用打印速度作为内壁速度\n"
-"使用较高的打印机速度可以减少模型的打印时间，需要设置好外壳速度、打印速度、填"
-"充速度之间的关系"
-
-#: Cura/util/profile.py:210 Cura/util/profile.py:211 Cura/util/profile.py:216
-#: Cura/util/profile.py:217 Cura/util/profile.py:218 Cura/util/profile.py:219
-#: Cura/util/profile.py:220
-msgid "Cool"
-msgstr "冷却"
-
-#: Cura/util/profile.py:210
-msgid "Minimal layer time (sec)"
-msgstr "每层最小打印时间(sec)"
-
-#: Cura/util/profile.py:210
-msgid ""
-"Minimum time spent in a layer, gives the layer time to cool down before the "
-"next layer is put on top. If the layer will be placed down too fast the "
-"printer will slow down to make sure it has spent at least this amount of "
-"seconds printing this layer."
-msgstr ""
-"打印每层至少要耗费的时间\n"
-"在打印下一层前留一定时间让当前层冷却。如果当前层会被很快打印完，那么打印机会"
-"适当降低速度，以保证有这个设定时间"
-
-#: Cura/util/profile.py:211
-msgid "Enable cooling fan"
-msgstr "开启风扇冷却"
-
-#: Cura/util/profile.py:211
-msgid ""
-"Enable the cooling fan during the print. The extra cooling from the cooling "
-"fan is essential during faster prints."
-msgstr ""
-"在打印期间开启风扇冷却\n"
-"在快速打印时开启风扇冷却是很有必要的"
-
-#: Cura/util/profile.py:213
-msgid "Line count"
-msgstr "线数"
-
-#: Cura/util/profile.py:213
-msgid ""
-"The skirt is a line drawn around the object at the first layer. This helps "
-"to prime your extruder, and to see if the object fits on your platform.\n"
-"Setting this to 0 will disable the skirt. Multiple skirt lines can help "
-"priming your extruder better for small objects."
-msgstr ""
-
-#: Cura/util/profile.py:214
-msgid "Start distance (mm)"
-msgstr "开始距离(mm)"
-
-#: Cura/util/profile.py:214
-msgid ""
-"The distance between the skirt and the first layer.\n"
-"This is the minimal distance, multiple skirt lines will be put outwards from "
-"this distance."
-msgstr ""
-
-#: Cura/util/profile.py:215
-msgid "Minimal length (mm)"
-msgstr "最小距离(mm)"
-
-#: Cura/util/profile.py:215
-msgid ""
-"The minimal length of the skirt, if this minimal length is not reached it "
-"will add more skirt lines to reach this minimal lenght.\n"
-"Note: If the line count is set to 0 this is ignored."
-msgstr ""
-
-#: Cura/util/profile.py:216
-msgid "Fan full on at height (mm)"
-msgstr "风扇全速开启高度(mm)"
-
-#: Cura/util/profile.py:216
-msgid ""
-"The height at which the fan is turned on completely. For the layers below "
-"this the fan speed is scaled linearly with the fan off at layer 0."
-msgstr ""
-
-#: Cura/util/profile.py:217
-msgid "Fan speed min (%)"
-msgstr "风扇最小速度(%)"
-
-#: Cura/util/profile.py:217
-msgid ""
-"When the fan is turned on, it is enabled at this speed setting. If cool "
-"slows down the layer, the fan is adjusted between the min and max speed. "
-"Minimal fan speed is used if the layer is not slowed down due to cooling."
-msgstr ""
-
-#: Cura/util/profile.py:218
-msgid "Fan speed max (%)"
-msgstr "风扇最大速度(%)"
-
-#: Cura/util/profile.py:218
-msgid ""
-"When the fan is turned on, it is enabled at this speed setting. If cool "
-"slows down the layer, the fan is adjusted between the min and max speed. "
-"Maximal fan speed is used if the layer is slowed down due to cooling by more "
-"than 200%."
-msgstr ""
-
-#: Cura/util/profile.py:219
-msgid "Minimum speed (mm/s)"
-msgstr "最小速度 (mm/s)"
-
-#: Cura/util/profile.py:219
-msgid ""
-"The minimal layer time can cause the print to slow down so much it starts to "
-"ooze. The minimal feedrate protects against this. Even if a print gets "
-"slowed down it will never be slower than this minimal speed."
-msgstr ""
-
-#: Cura/util/profile.py:220
-msgid "Cool head lift"
-msgstr "喷头移开冷却"
-
-#: Cura/util/profile.py:220
-msgid ""
-"Lift the head if the minimal speed is hit because of cool slowdown, and wait "
-"the extra time so the minimal layer time is always hit."
-msgstr ""
-
-#: Cura/util/profile.py:221 Cura/util/profile.py:222 Cura/util/profile.py:223
-msgid "Infill"
-msgstr "填充"
-
-#: Cura/util/profile.py:221
-msgid "Solid infill top"
-msgstr "填充顶层"
-
-#: Cura/util/profile.py:221
-msgid ""
-"Create a solid top surface, if set to false the top is filled with the fill "
-"percentage. Useful for cups/vases."
-msgstr ""
-
-#: Cura/util/profile.py:222
-msgid "Solid infill bottom"
-msgstr "填充底层"
-
-#: Cura/util/profile.py:222
-msgid ""
-"Create a solid bottom surface, if set to false the bottom is filled with the "
-"fill percentage. Useful for buildings."
-msgstr ""
-
-#: Cura/util/profile.py:223
-msgid "Infill overlap (%)"
-msgstr "填充重合(%)"
-
-#: Cura/util/profile.py:223
-msgid ""
-"Amount of overlap between the infill and the walls. There is a slight "
-"overlap with the walls and the infill so the walls connect firmly to the "
-"infill."
-msgstr ""
-
-#: Cura/util/profile.py:224
-msgid "Structure type"
-msgstr "支撑类型"
-
-#: Cura/util/profile.py:224
-msgid ""
-"The type of support structure.\n"
-"Grid is very strong and can come off in 1 piece, however, sometimes it is "
-"too strong.\n"
-"Lines are single walled lines that break off one at a time. Which is more "
-"work to remove, but as it is less strong it does work better on tricky "
-"prints."
-msgstr ""
-
-#: Cura/util/profile.py:225
-msgid "Overhang angle for support (deg)"
-msgstr "支撑临界角(deg)"
-
-#: Cura/util/profile.py:225
-msgid ""
-"The minimal angle that overhangs need to have to get support. With 0 degree "
-"being horizontal and 90 degree being vertical."
-msgstr ""
-
-#: Cura/util/profile.py:226
-msgid "Fill amount (%)"
-msgstr "支撑密度"
-
-#: Cura/util/profile.py:226
-#, python-format
-msgid ""
-"Amount of infill structure in the support material, less material gives "
-"weaker support which is easier to remove. 15% seems to be a good average."
-msgstr ""
-
-#: Cura/util/profile.py:227
-msgid "Distance X/Y (mm)"
-msgstr "X/Y轴距离"
-
-#: Cura/util/profile.py:227
-msgid ""
-"Distance of the support material from the print, in the X/Y directions.\n"
-"0.7mm gives a nice distance from the print so the support does not stick to "
-"the print."
-msgstr ""
-
-#: Cura/util/profile.py:228
-msgid "Distance Z (mm)"
-msgstr "Z轴距离"
-
-#: Cura/util/profile.py:228
-msgid ""
-"Distance from the top/bottom of the support to the print. A small gap here "
-"makes it easier to remove the support but makes the print a bit uglier.\n"
-"0.15mm gives a good seperation of the support material."
-msgstr ""
-
-#: Cura/util/profile.py:229
-msgid "Spiralize the outer contour"
-msgstr "平滑抬升"
-
-#: Cura/util/profile.py:229
-msgid ""
-"Spiralize is smoothing out the Z move of the outer edge. This will create a "
-"steady Z increase over the whole print. This feature turns a solid object "
-"into a single walled print with a solid bottom.\n"
-"This feature used to be called Joris in older versions."
-msgstr ""
-"开启后，可以螺旋状打印表面\n"
-"打印出个表面非常光滑，但会丢失内部填充"
-
-#: Cura/util/profile.py:230
-msgid "Only follow mesh surface"
-msgstr "平滑表面"
-
-#: Cura/util/profile.py:230
-msgid ""
-"Only follow the mesh surfaces of the 3D model, do not do anything else. No "
-"infill, no top/bottom, nothing."
-msgstr "开启后仅打印表面，顶、底、内部填充都会丢失"
-
-#: Cura/util/profile.py:232
-msgid "Brim line amount"
-msgstr "边沿走线圈数"
-
-#: Cura/util/profile.py:232
-msgid ""
-"The amount of lines used for a brim, more lines means a larger brim which "
-"sticks better, but this also makes your effective print area smaller."
-msgstr ""
-
-#: Cura/util/profile.py:233
-msgid "Extra margin (mm)"
-msgstr "额外边缘(mm)"
-
-#: Cura/util/profile.py:233
-msgid ""
-"If the raft is enabled, this is the extra raft area around the object which "
-"is also rafted. Increasing this margin will create a stronger raft while "
-"using more material and leaving less area for your print."
-msgstr ""
-
-#: Cura/util/profile.py:234
-msgid "Line spacing (mm)"
-msgstr "走线间隔(mm)"
-
-#: Cura/util/profile.py:234
-msgid ""
-"When you are using the raft this is the distance between the centerlines of "
-"the raft line."
-msgstr ""
-
-#: Cura/util/profile.py:235
-msgid "Base thickness (mm)"
-msgstr "基底层厚度(mm)"
-
-#: Cura/util/profile.py:235
-msgid ""
-"When you are using the raft this is the thickness of the base layer which is "
-"put down."
-msgstr ""
-
-#: Cura/util/profile.py:236
-msgid "Base line width (mm)"
-msgstr "基底层走线宽度(mm)"
-
-#: Cura/util/profile.py:236
-msgid ""
-"When you are using the raft this is the width of the base layer lines which "
-"are put down."
-msgstr ""
-
-#: Cura/util/profile.py:237
-msgid "Interface thickness (mm)"
-msgstr "接触层厚度(mm)"
-
-#: Cura/util/profile.py:237
-msgid ""
-"When you are using the raft this is the thickness of the interface layer "
-"which is put down."
-msgstr ""
-
-#: Cura/util/profile.py:238
-msgid "Interface line width (mm)"
-msgstr "接触层走线宽度 (mm)"
-
-#: Cura/util/profile.py:238
-msgid ""
-"When you are using the raft this is the width of the interface layer lines "
-"which are put down."
-msgstr ""
-
-#: Cura/util/profile.py:239
-msgid "Airgap"
-msgstr "拼合间隙"
-
-#: Cura/util/profile.py:239
-msgid ""
-"Gap between the last layer of the raft and the first printing layer. A small "
-"gap of 0.2mm works wonders on PLA and makes the raft easy to remove."
-msgstr ""
-"在基底和模型之间的间隙距离\n"
-"这个间隙能让模型更容易取下，使用PLA建议设为0.2mm"
-
-#: Cura/util/profile.py:240
-msgid "Surface layers"
-msgstr "表层"
-
-#: Cura/util/profile.py:240
-msgid ""
-"Amount of surface layers put on top of the raft, these are fully filled "
-"layers on which the model is printed."
-msgstr ""
-
-#: Cura/util/profile.py:241 Cura/util/profile.py:242 Cura/util/profile.py:243
-#: Cura/util/profile.py:244
-msgid "Fix horrible"
-msgstr "缺陷修复"
-
-#: Cura/util/profile.py:241
-msgid "Combine everything (Type-A)"
-msgstr "闭合面片(Type-A)"
-
-#: Cura/util/profile.py:241 Cura/util/profile.py:242
-msgid ""
-"This expert option adds all parts of the model together. The result is "
-"usually that internal cavities disappear. Depending on the model this can be "
-"intended or not. Enabling this option is at your own risk. Type-A is "
-"dependent on the model normals and tries to keep some internal holes intact. "
-"Type-B ignores all internal holes and only keeps the outside shape per layer."
-msgstr ""
-
-#: Cura/util/profile.py:242
-msgid "Combine everything (Type-B)"
-msgstr "闭合面片(Type-B)"
-
-#: Cura/util/profile.py:243
-msgid "Keep open faces"
-msgstr "保持开放面"
-
-#: Cura/util/profile.py:243
-msgid ""
-"This expert option keeps all the open bits of the model intact. Normally "
-"Cura tries to stitch up small holes and remove everything with big holes, "
-"but this option keeps bits that are not properly part of anything and just "
-"goes with whatever is left. This option is usually not what you want, but it "
-"might enable you to slice models otherwise failing to produce proper paths.\n"
-"As with all \"Fix horrible\" options, results may vary and use at your own "
-"risk."
-msgstr ""
-
-#: Cura/util/profile.py:244
-msgid "Extensive stitching"
-msgstr "泛拼接"
-
-#: Cura/util/profile.py:244
-msgid ""
-"Extensive stitching tries to fix up open holes in the model by closing the "
-"hole with touching polygons. This algorthm is quite expensive and could "
-"introduce a lot of processing time.\n"
-"As with all \"Fix horrible\" options, results may vary and use at your own "
-"risk."
-msgstr ""
-
-#: Cura/util/profile.py:470
-msgid "Save profile on slice"
-msgstr ""
-
-#: Cura/util/profile.py:470
-msgid ""
-"When slicing save the profile as [stl_file]_profile.ini next to the model."
-msgstr ""
-
-#: Cura/util/profile.py:471
-msgid "Cost (price/kg)"
-msgstr ""
-
-#: Cura/util/profile.py:471
-msgid "Cost of your filament per kg, to estimate the cost of the final print."
-msgstr ""
-
-#: Cura/util/profile.py:472
-msgid "Cost (price/m)"
-msgstr ""
-
-#: Cura/util/profile.py:472
-msgid ""
-"Cost of your filament per meter, to estimate the cost of the final print."
-msgstr ""
-
-#: Cura/util/profile.py:473
-msgid "Auto detect SD card drive"
-msgstr ""
-
-#: Cura/util/profile.py:473
-msgid ""
-"Auto detect the SD card. You can disable this because on some systems "
-"external hard-drives or USB sticks are detected as SD card."
-msgstr ""
-
-#: Cura/util/profile.py:474
-msgid "Check for updates"
-msgstr ""
-
-#: Cura/util/profile.py:474
-msgid "Check for newer versions of Cura on startup"
-msgstr ""
-
-#: Cura/util/profile.py:475
-msgid "Send usage statistics"
-msgstr ""
-
-#: Cura/util/profile.py:475
-msgid "Submit anonymous usage information to improve future versions of Cura"
-msgstr ""
-
-#: Cura/util/profile.py:477
-msgid "Density (kg/m3)"
-msgstr ""
-
-#: Cura/util/profile.py:477
-msgid ""
-"Weight of the filament per m3. Around 1240 for PLA. And around 1040 for ABS. "
-"This value is used to estimate the weight if the filament used for the print."
-msgstr ""
-
-#: Cura/util/profile.py:478
-msgid ""
-"Change the language in which Cura runs. Switching language requires a "
-"restart of Cura"
-msgstr ""
-
-#: Cura/util/profile.py:481
-msgid "Model colour"
-msgstr "模型颜色"
-
-#: Cura/util/profile.py:481
-msgid "Display color for first extruder"
-msgstr ""
-
-#: Cura/util/profile.py:482
-msgid "Model colour (2)"
-msgstr "模型颜色(2)"
-
-#: Cura/util/profile.py:482
-msgid "Display color for second extruder"
-msgstr ""
-
-#: Cura/util/profile.py:483
-msgid "Model colour (3)"
-msgstr "模型颜色(3)"
-
-#: Cura/util/profile.py:483
-msgid "Display color for third extruder"
-msgstr ""
-
-#: Cura/util/profile.py:484
-msgid "Model colour (4)"
-msgstr "模型颜色(4)"
-
-#: Cura/util/profile.py:484
-msgid "Display color for forth extruder"
-msgstr ""
-
-#: Cura/util/profile.py:485
-msgid "Printing window type"
-msgstr "打印窗口类型"
-
-#: Cura/util/profile.py:485
-msgid "Select the interface used for USB printing."
-msgstr ""
-
-#: Cura/util/profile.py:497
-msgid "Maximum width (mm)"
-msgstr "最大宽度 (mm)"
-
-#: Cura/util/profile.py:497 Cura/util/profile.py:498 Cura/util/profile.py:499
-msgid "Size of the machine in mm"
-msgstr ""
-
-#: Cura/util/profile.py:498
-msgid "Maximum depth (mm)"
-msgstr "最大深度(mm)"
-
-#: Cura/util/profile.py:499
-msgid "Maximum height (mm)"
-msgstr ""
-
-#: Cura/util/profile.py:500
-msgid "Machine center 0,0"
-msgstr "平台中心 0,0"
-
-#: Cura/util/profile.py:500
-msgid ""
-"Machines firmware defines the center of the bed as 0,0 instead of the front "
-"left corner."
-msgstr ""
-
-#: Cura/util/profile.py:501
-msgid "Build area shape"
-msgstr ""
-
-#: Cura/util/profile.py:501
-msgid "The shape of machine build area."
-msgstr ""
-
-#: Cura/util/profile.py:503
-msgid ""
-"If you have an heated bed, this enabled heated bed settings (requires "
-"restart)"
-msgstr ""
-
-#: Cura/util/profile.py:504
-msgid "GCode Flavor"
-msgstr "Gcode类型"
-
-#: Cura/util/profile.py:504
-msgid ""
-"Flavor of generated GCode.\n"
-"RepRap is normal 5D GCode which works on Marlin/Sprinter based firmwares.\n"
-"UltiGCode is a variation of the RepRap GCode which puts more settings in the "
-"machine instead of the slicer.\n"
-"MakerBot GCode has a few changes in the way GCode is generated, but still "
-"requires MakerWare to generate to X3G.\n"
-"BFB style generates RPM based code.\n"
-"Mach3 uses A,B,C instead of E for extruders."
-msgstr ""
-
-#: Cura/util/profile.py:505
-msgid "Extruder count"
-msgstr "挤出机数量"
-
-#: Cura/util/profile.py:505
-msgid "Amount of extruders in your machine."
-msgstr ""
-
-#: Cura/util/profile.py:506 Cura/util/profile.py:508 Cura/util/profile.py:510
-msgid "Offset X"
-msgstr "X补偿"
-
-#: Cura/util/profile.py:506 Cura/util/profile.py:507
-msgid "The offset of your secondary extruder compared to the primary."
-msgstr ""
-
-#: Cura/util/profile.py:507 Cura/util/profile.py:509 Cura/util/profile.py:511
-msgid "Offset Y"
-msgstr "Y补偿"
-
-#: Cura/util/profile.py:508 Cura/util/profile.py:509
-msgid "The offset of your tertiary extruder compared to the primary."
-msgstr ""
-
-#: Cura/util/profile.py:510 Cura/util/profile.py:511
-msgid "The offset of your forth extruder compared to the primary."
-msgstr ""
-
-#: Cura/util/profile.py:512
-msgid "E-Steps per 1mm filament"
-msgstr ""
-
-#: Cura/util/profile.py:512
-msgid ""
-"Amount of steps per mm filament extrusion. If set to 0 then this value is "
-"ignored and the value in your firmware is used."
-msgstr ""
-
-#: Cura/util/profile.py:513
-msgid "Serial port"
-msgstr "串口"
-
-#: Cura/util/profile.py:513
-msgid "Serial port to use for communication with the printer"
-msgstr ""
-
-#: Cura/util/profile.py:515
-msgid "Baudrate"
-msgstr "波特率"
-
-#: Cura/util/profile.py:515
-msgid ""
-"Speed of the serial port communication\n"
-"Needs to match your firmware settings\n"
-"Common values are 250000, 115200, 57600"
-msgstr ""
-
-#: Cura/util/profile.py:518
-msgid "Head size towards X min (mm)"
-msgstr ""
-
-#: Cura/util/profile.py:518
-msgid ""
-"The head size when printing multiple objects, measured from the tip of the "
-"nozzle towards the outer part of the head. 75mm for an Ultimaker if the fan "
-"is on the left side."
-msgstr ""
-
-#: Cura/util/profile.py:519
-msgid "Head size towards Y min (mm)"
-msgstr ""
-
-#: Cura/util/profile.py:519 Cura/util/profile.py:520
-msgid ""
-"The head size when printing multiple objects, measured from the tip of the "
-"nozzle towards the outer part of the head. 18mm for an Ultimaker if the fan "
-"is on the left side."
-msgstr ""
-
-#: Cura/util/profile.py:520
-msgid "Head size towards X max (mm)"
-msgstr ""
-
-#: Cura/util/profile.py:521
-msgid "Head size towards Y max (mm)"
-msgstr ""
-
-#: Cura/util/profile.py:521
-msgid ""
-"The head size when printing multiple objects, measured from the tip of the "
-"nozzle towards the outer part of the head. 35mm for an Ultimaker if the fan "
-"is on the left side."
-msgstr ""
-
-#: Cura/util/profile.py:522
-msgid "Printer gantry height (mm)"
-msgstr ""
-
-#: Cura/util/profile.py:522
-msgid ""
-"The height of the gantry holding up the printer head. If an object is higher "
-"then this then you cannot print multiple objects one for one. 60mm for an "
-"Ultimaker."
-msgstr ""
-
-#: Cura/util/profile.py:524
-#, python-format
-msgid "More flow than 150% is rare and usually not recommended."
-msgstr ""
-
-#: Cura/util/profile.py:525
-#, python-format
-msgid "Less flow than 50% is rare and usually not recommended."
-msgstr ""
-
-#: Cura/util/profile.py:526
-#, python-format
-msgid ""
-"Thicker layers then %.2fmm (80%% nozzle size) usually give bad results and "
-"are not recommended."
-msgstr ""
-
-#: Cura/util/profile.py:528
-msgid ""
-"It is highly unlikely that your machine can achieve a printing speed above "
-"150mm/s"
-msgstr ""
-
-#: Cura/util/profile.py:530 Cura/util/profile.py:531 Cura/util/profile.py:532
-#: Cura/util/profile.py:533
-msgid "Temperatures above 260C could damage your machine, be careful!"
-msgstr ""
-
-#: Cura/util/profile.py:534 Cura/util/profile.py:535 Cura/util/profile.py:536
-#: Cura/util/profile.py:537
-msgid ""
-"Are you sure your filament is that thick? Normal filament is around 3mm or "
-"1.75mm."
-msgstr ""
-
-#: Cura/util/profile.py:538
-msgid ""
-"It is highly unlikely that your machine can achieve a travel speed above "
-"300mm/s"
-msgstr ""
-
-#: Cura/util/profile.py:539
-#, python-format
-msgid ""
-"A bottom layer of more then %.2fmm (3/4 nozzle size) usually give bad "
-"results and is not recommended."
-msgstr ""
+# SOME DESCRIPTIVE TITLE.\r
+# Copyright (C) 2013\r
+# This file is distributed under the same license as the Cura package.\r
+# Ilya Kulakov <kulakov.ilya@gmail.com>, 2013.\r
+#\r
+msgid ""\r
+msgstr ""\r
+"Project-Id-Version: Cura\n"\r
+"Report-Msgid-Bugs-To: \n"\r
+"POT-Creation-Date: 2014-10-13 09:32+0200\n"\r
+"PO-Revision-Date: 2014-09-29 16:02+0800\n"\r
+"Last-Translator: \n"\r
+"Language-Team: coloz <clz@clz.me>\n"\r
+"MIME-Version: 1.0\n"\r
+"Content-Type: text/plain; charset=UTF-8\n"\r
+"Content-Transfer-Encoding: 8bit\n"\r
+"X-Generator: Poedit 1.6.8\n"\r
+"Language: zh_Hans_CN\n"\r
+"Plural-Forms: nplurals=1; plural=0;\n"\r
+\r
+#: Cura/gui/app.py:140 Cura/gui/mainWindow.py:566\r
+msgid "A new version of Cura is available, would you like to download?"\r
+msgstr ""\r
+\r
+#: Cura/gui/app.py:140 Cura/gui/mainWindow.py:566\r
+msgid "New version available"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:231\r
+msgid "Add new machine wizard"\r
+msgstr "添加机型"\r
+\r
+#: Cura/gui/configWizard.py:233\r
+msgid "First time run wizard"\r
+msgstr "配置向导"\r
+\r
+#: Cura/gui/configWizard.py:234\r
+msgid "Welcome, and thanks for trying Cura!"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:236\r
+msgid "This wizard will help you in setting up Cura for your machine."\r
+msgstr "向导将协助你，为你的机型配置Cura"\r
+\r
+#: Cura/gui/configWizard.py:239\r
+#, fuzzy\r
+msgid "Select your language:"\r
+msgstr "设置你的机型"\r
+\r
+#: Cura/gui/configWizard.py:280\r
+msgid "Select which Printrbot machine you have:"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:317\r
+msgid "The following pre-defined machine profiles are available"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:318\r
+msgid ""\r
+"Note that these profiles are not guaranteed to give good results,\n"\r
+"or work at all. Extra tweaks might be required.\n"\r
+"If you find issues with the predefined profiles,\n"\r
+"or want an extra profile.\n"\r
+"Please report it at the github issue tracker."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:348\r
+msgid "Cura is now ready to be used!"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:353\r
+msgid ""\r
+"RepRap machines can be vastly different, so here you can set your own "\r
+"settings."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:354\r
+msgid ""\r
+"Be sure to review the default profile before running it on your machine."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:355\r
+msgid ""\r
+"If you like a default profile for your machine added,\n"\r
+"then make an issue on github."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:357\r
+msgid "You will have to manually install Marlin or Sprinter firmware."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:359\r
+msgid "Machine name"\r
+msgstr "机型名称"\r
+\r
+#: Cura/gui/configWizard.py:360\r
+msgid "Machine width (mm)"\r
+msgstr "构建宽度"\r
+\r
+#: Cura/gui/configWizard.py:361\r
+msgid "Machine depth (mm)"\r
+msgstr "构建深度"\r
+\r
+#: Cura/gui/configWizard.py:362\r
+msgid "Machine height (mm)"\r
+msgstr "构建高度"\r
+\r
+#: Cura/gui/configWizard.py:363 Cura/util/profile.py:175\r
+msgid "Nozzle size (mm)"\r
+msgstr "喷嘴孔径"\r
+\r
+#: Cura/gui/configWizard.py:364 Cura/util/profile.py:503\r
+msgid "Heated bed"\r
+msgstr "热床"\r
+\r
+#: Cura/gui/configWizard.py:365\r
+msgid "Bed center is 0,0,0 (RoStock)"\r
+msgstr "平台中心为0,0,0"\r
+\r
+#: Cura/gui/configWizard.py:385\r
+msgid "Select your machine"\r
+msgstr "设置你的机型"\r
+\r
+#: Cura/gui/configWizard.py:386\r
+msgid "What kind of machine do you have:"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:401\r
+#, fuzzy\r
+msgid "Other (Ex: RepRap, MakerBot, Witbox)"\r
+msgstr "其他机型（如MostFun Sail）"\r
+\r
+#: Cura/gui/configWizard.py:404\r
+msgid ""\r
+"The collection of anonymous usage information helps with the continued "\r
+"improvement of Cura."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:405\r
+msgid ""\r
+"This does NOT submit your models online nor gathers any privacy related "\r
+"information."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:406\r
+msgid "Submit anonymous usage information:"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:407\r
+msgid "For full details see: http://wiki.ultimaker.com/Cura:stats"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:524\r
+msgid "Select upgraded parts you have"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:525\r
+msgid ""\r
+"To assist you in having better default settings for your Ultimaker\n"\r
+"Cura would like to know which upgrades you have in your machine."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:527\r
+msgid "Extruder drive upgrade"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:528\r
+msgid "Heated printer bed (kit)"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:529\r
+msgid "Heated printer bed (self built)"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:530\r
+msgid "Dual extrusion (experimental)"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:532\r
+msgid ""\r
+"If you have an Ultimaker bought after october 2012 you will have the\n"\r
+"Extruder drive upgrade. If you do not have this upgrade,\n"\r
+"it is highly recommended to improve reliability."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:533\r
+msgid ""\r
+"This upgrade can be bought from the Ultimaker webshop\n"\r
+"or found on thingiverse as thing:26094"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:555\r
+msgid "Upgrade Ultimaker Firmware"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:556\r
+msgid ""\r
+"Firmware is the piece of software running directly on your 3D printer.\n"\r
+"This firmware controls the step motors, regulates the temperature\n"\r
+"and ultimately makes your printer work."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:558\r
+msgid ""\r
+"The firmware shipping with new Ultimakers works, but upgrades\n"\r
+"have been made to make better prints, and make calibration easier."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:560\r
+msgid ""\r
+"Cura requires these new features and thus\n"\r
+"your firmware will most likely need to be upgraded.\n"\r
+"You will get the chance to do so now."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:566\r
+msgid "Do not upgrade to this firmware if:"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:567\r
+msgid "* You have an older machine based on ATMega1280 (Rev 1 machine)"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:568\r
+msgid "* Build your own heated bed"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:569\r
+msgid "* Have other changes in the firmware"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:603\r
+msgid ""\r
+"It is a good idea to do a few sanity checks now on your Ultimaker.\n"\r
+"You can skip these if you know your machine is functional."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:604\r
+msgid "Run checks"\r
+msgstr "运行检测"\r
+\r
+#: Cura/gui/configWizard.py:604\r
+msgid "Skip checks"\r
+msgstr "跳过检测"\r
+\r
+#: Cura/gui/configWizard.py:608\r
+msgid "Communication:"\r
+msgstr "通信:"\r
+\r
+#: Cura/gui/configWizard.py:609\r
+msgid "Temperature:"\r
+msgstr "温度:"\r
+\r
+#: Cura/gui/configWizard.py:610\r
+msgid "Endstops:"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:615\r
+msgid "Show error log"\r
+msgstr "显示错误日志"\r
+\r
+#: Cura/gui/configWizard.py:649\r
+msgid "Connecting to machine."\r
+msgstr "正在连接打印机"\r
+\r
+#: Cura/gui/configWizard.py:670\r
+msgid "Cooldown before temperature check."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:676 Cura/gui/configWizard.py:683\r
+msgid "Checking the heater and temperature sensor."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:694\r
+msgid "Please make sure none of the endstops are pressed."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:707\r
+msgid "Temperature measurement FAILED!"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:712\r
+#, python-format\r
+msgid "Head temperature: %d"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:719 Cura/gui/configWizard.py:728\r
+#, python-format\r
+msgid "Communication State: %s"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:722\r
+msgid "Failed to establish connection with the printer."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:768 Cura/gui/configWizard.py:777\r
+msgid "Please press the left X endstop."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:772\r
+msgid "Please press the right X endstop."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:782\r
+msgid "Please press the front Y endstop."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:788 Cura/gui/configWizard.py:797\r
+msgid "Please press the top Z endstop."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:792\r
+msgid "Please press the back Y endstop."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:804 Cura/gui/configWizard.py:817\r
+msgid "Checkup finished"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:811\r
+msgid "Please press the bottom Z endstop."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:860\r
+msgid "Calibrating the Steps Per E requires some manual actions."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:861\r
+msgid "First remove any filament from your machine."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:862\r
+msgid ""\r
+"Next put in your filament so the tip is aligned with the\n"\r
+"top of the extruder drive."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:863\r
+msgid "We'll push the filament 100mm"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:864\r
+msgid "Extrude 100mm filament"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:865\r
+msgid ""\r
+"Now measure the amount of extruded filament:\n"\r
+"(this can be more or less then 100mm)"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:866\r
+msgid "Save"\r
+msgstr "保存"\r
+\r
+#: Cura/gui/configWizard.py:867\r
+msgid "This results in the following steps per E:"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:869\r
+msgid "You can repeat these steps to get better calibration."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:872\r
+msgid ""\r
+"If you still have filament in your printer which needs\n"\r
+"heat to remove, press the heat up button below:"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:873\r
+msgid "Heatup for filament removal"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:898 Cura/gui/configWizard.py:932\r
+msgid ""\r
+"Error: Failed to open serial port to machine\n"\r
+"If this keeps happening, try disconnecting and reconnecting the USB cable"\r
+msgstr ""\r
+\r
+#: Cura/gui/firmwareInstall.py:58\r
+msgid ""\r
+"I am sorry, but Cura does not ship with a default firmware for your machine "\r
+"configuration."\r
+msgstr ""\r
+\r
+#: Cura/gui/firmwareInstall.py:58 Cura/gui/firmwareInstall.py:62\r
+#: Cura/gui/firmwareInstall.py:117 Cura/gui/mainWindow.py:508\r
+msgid "Firmware update"\r
+msgstr "固件更新"\r
+\r
+#: Cura/gui/firmwareInstall.py:62\r
+msgid ""\r
+"Cura only supports firmware updates for ATMega2560 based hardware.\n"\r
+"So updating your RepRap with Cura might or might not work."\r
+msgstr ""\r
+"Cura仅支持基于ATmega2560的机型升级\n"\r
+"升级固件后也许大概有可能你的打印机无法正常工作"\r
+\r
+#: Cura/gui/firmwareInstall.py:70\r
+msgid "OK"\r
+msgstr "确定"\r
+\r
+#: Cura/gui/firmwareInstall.py:91\r
+msgid "Reading firmware..."\r
+msgstr "读取固件..."\r
+\r
+#: Cura/gui/firmwareInstall.py:93\r
+msgid "Connecting to machine..."\r
+msgstr "连接到打印机..."\r
+\r
+#: Cura/gui/firmwareInstall.py:97\r
+msgid ""\r
+"Please connect the printer to\n"\r
+"your computer with the USB cable."\r
+msgstr ""\r
+\r
+#: Cura/gui/firmwareInstall.py:116\r
+msgid ""\r
+"Failed to find machine for firmware upgrade\n"\r
+"Is your machine connected to the PC?"\r
+msgstr ""\r
+\r
+#: Cura/gui/firmwareInstall.py:121\r
+msgid "Uploading firmware..."\r
+msgstr "固件上传中"\r
+\r
+#: Cura/gui/firmwareInstall.py:124\r
+#, python-format\r
+msgid ""\r
+"Done!\n"\r
+"Installed firmware: %s"\r
+msgstr ""\r
+"完成!\n"\r
+"成功写入固件: %s"\r
+\r
+#: Cura/gui/firmwareInstall.py:126\r
+msgid "Failed to write firmware.\n"\r
+msgstr "固件写入失败\n"\r
+\r
+#: Cura/gui/mainWindow.py:66\r
+msgid "Load model file...\tCTRL+L"\r
+msgstr "读取模型文件...\tCTRL+L"\r
+\r
+#: Cura/gui/mainWindow.py:68\r
+msgid "Save model...\tCTRL+S"\r
+msgstr "保存模型...\tCTRL+S"\r
+\r
+#: Cura/gui/mainWindow.py:70\r
+msgid "Reload platform\tF5"\r
+msgstr "重新载入模型\tF5"\r
+\r
+#: Cura/gui/mainWindow.py:72\r
+msgid "Clear platform"\r
+msgstr "清除所有模型"\r
+\r
+#: Cura/gui/mainWindow.py:76\r
+msgid "Print...\tCTRL+P"\r
+msgstr "打印...\tCTRL+P"\r
+\r
+#: Cura/gui/mainWindow.py:78 Cura/gui/sceneView.py:279\r
+msgid "Save GCode..."\r
+msgstr "保存GCode..."\r
+\r
+#: Cura/gui/mainWindow.py:80\r
+msgid "Show slice engine log..."\r
+msgstr "显示切片引擎记录..."\r
+\r
+#: Cura/gui/mainWindow.py:84\r
+msgid "Open Profile..."\r
+msgstr "打开配置文件..."\r
+\r
+#: Cura/gui/mainWindow.py:87\r
+msgid "Save Profile..."\r
+msgstr "保存配置文件..."\r
+\r
+#: Cura/gui/mainWindow.py:90\r
+msgid "Load Profile from GCode..."\r
+msgstr "从Gcode中读取配置文件..."\r
+\r
+#: Cura/gui/mainWindow.py:94\r
+msgid "Reset Profile to default"\r
+msgstr "恢复默认配置..."\r
+\r
+#: Cura/gui/mainWindow.py:99\r
+msgid "Preferences...\tCTRL+,"\r
+msgstr "偏好配置......\tCTRL+,"\r
+\r
+#: Cura/gui/mainWindow.py:101 Cura/gui/mainWindow.py:434\r
+msgid "Machine settings..."\r
+msgstr "机型设置..."\r
+\r
+#: Cura/gui/mainWindow.py:107\r
+msgid "Recent Model Files"\r
+msgstr "最近使用的模型文件"\r
+\r
+#: Cura/gui/mainWindow.py:114\r
+msgid "Recent Profile Files"\r
+msgstr "最近使用的配置文件"\r
+\r
+#: Cura/gui/mainWindow.py:120\r
+msgid "Quit"\r
+msgstr "退出"\r
+\r
+#: Cura/gui/mainWindow.py:122\r
+msgid "File"\r
+msgstr "文件"\r
+\r
+#: Cura/gui/mainWindow.py:130\r
+msgid "Minecraft map import..."\r
+msgstr "导入Minecraft地图..."\r
+\r
+#: Cura/gui/mainWindow.py:134\r
+msgid "PID Debugger..."\r
+msgstr "PID调试器..."\r
+\r
+#: Cura/gui/mainWindow.py:137\r
+msgid "Copy profile to clipboard"\r
+msgstr "复制配置到剪切板"\r
+\r
+#: Cura/gui/mainWindow.py:141\r
+msgid "Print all at once"\r
+msgstr "同时打印多个模型"\r
+\r
+#: Cura/gui/mainWindow.py:143\r
+msgid "Print one at a time"\r
+msgstr "逐个打印模型"\r
+\r
+#: Cura/gui/mainWindow.py:150\r
+msgid "Tools"\r
+msgstr "工具"\r
+\r
+#: Cura/gui/mainWindow.py:156 Cura/util/profile.py:175\r
+msgid "Machine"\r
+msgstr "机型"\r
+\r
+#: Cura/gui/mainWindow.py:159\r
+msgid "Switch to quickprint..."\r
+msgstr "切换到快速打印模式..."\r
+\r
+#: Cura/gui/mainWindow.py:163\r
+msgid "Switch to full settings..."\r
+msgstr "切换到完整配置模式..."\r
+\r
+#: Cura/gui/mainWindow.py:168\r
+msgid "Open expert settings...\tCTRL+E"\r
+msgstr "额外设置...\tCTRL+E"\r
+\r
+#: Cura/gui/mainWindow.py:172\r
+msgid "Run first run wizard..."\r
+msgstr "运行首次使用向导..."\r
+\r
+#: Cura/gui/mainWindow.py:174\r
+msgid "Run bed leveling wizard..."\r
+msgstr "运行平台调平向导..."\r
+\r
+#: Cura/gui/mainWindow.py:176\r
+msgid "Run head offset wizard..."\r
+msgstr "运行多喷头校正向导..."\r
+\r
+#: Cura/gui/mainWindow.py:179\r
+msgid "Expert"\r
+msgstr "专业设置"\r
+\r
+#: Cura/gui/mainWindow.py:182\r
+msgid "Online documentation..."\r
+msgstr "在线文档..."\r
+\r
+#: Cura/gui/mainWindow.py:184\r
+msgid "Report a problem..."\r
+msgstr "问题提交..."\r
+\r
+#: Cura/gui/mainWindow.py:186\r
+msgid "Check for update..."\r
+msgstr "检查更新..."\r
+\r
+#: Cura/gui/mainWindow.py:188\r
+msgid "Open YouMagine website..."\r
+msgstr "打开YouMagine网站..."\r
+\r
+#: Cura/gui/mainWindow.py:190\r
+msgid "About Cura..."\r
+msgstr "关于Cura"\r
+\r
+#: Cura/gui/mainWindow.py:192\r
+msgid "Help"\r
+msgstr "帮助"\r
+\r
+#: Cura/gui/mainWindow.py:343\r
+msgid ""\r
+"For \"One at a time\" printing, you need to have entered the correct head "\r
+"size and gantry height in the machine settings"\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:343\r
+msgid "One at a time warning"\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:440\r
+msgid "Install default firmware..."\r
+msgstr "安装默认固件..."\r
+\r
+#: Cura/gui/mainWindow.py:443\r
+msgid "Install custom firmware..."\r
+msgstr "安装自定义固件"\r
+\r
+#: Cura/gui/mainWindow.py:447\r
+msgid "Select profile file to load"\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:459\r
+msgid "Select gcode file to load profile from"\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:474\r
+msgid ""\r
+"No profile found in GCode file.\n"\r
+"This feature only works with GCode files made by Cura 12.07 or newer."\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:474\r
+msgid "Profile load error"\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:478\r
+msgid "Select profile file to save"\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:488\r
+msgid ""\r
+"This will reset all profile settings to defaults.\n"\r
+"Unless you have saved your current profile, all settings will be lost!\n"\r
+"Do you really want to reset?"\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:488\r
+msgid "Profile reset"\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:508\r
+msgid ""\r
+"Warning: Installing a custom firmware does not guarantee that you machine "\r
+"will function correctly, and could damage your machine."\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:509\r
+msgid "Open firmware to upload"\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:569\r
+msgid "You are running the latest version of Cura!"\r
+msgstr "你正在运行最新版本的的Cura!"\r
+\r
+#: Cura/gui/mainWindow.py:569\r
+msgid "Awesome!"\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:624\r
+msgid "Plugins"\r
+msgstr "插件"\r
+\r
+#: Cura/gui/pluginPanel.py:27\r
+msgid "Plugins:"\r
+msgstr "插件:"\r
+\r
+#: Cura/gui/pluginPanel.py:31\r
+msgid "Open plugin location"\r
+msgstr "打开本地插件"\r
+\r
+#: Cura/gui/pluginPanel.py:32\r
+msgid "Enabled plugins"\r
+msgstr "使能插件"\r
+\r
+#: Cura/gui/pluginPanel.py:134\r
+msgid "You need to select a plugin before you can add anything."\r
+msgstr ""\r
+\r
+#: Cura/gui/pluginPanel.py:134\r
+msgid "Error: no plugin selected"\r
+msgstr "错误:没有插件可供选择"\r
+\r
+#: Cura/gui/preferencesDialog.py:28\r
+msgid "Print window"\r
+msgstr "打印窗口"\r
+\r
+#: Cura/gui/preferencesDialog.py:31\r
+msgid "Colours"\r
+msgstr "颜色"\r
+\r
+#: Cura/gui/preferencesDialog.py:37 Cura/util/profile.py:478\r
+msgid "Language"\r
+msgstr "语言"\r
+\r
+#: Cura/gui/preferencesDialog.py:40\r
+msgid "Filament settings"\r
+msgstr "打印丝"\r
+\r
+#: Cura/gui/preferencesDialog.py:50\r
+msgid "Cura settings"\r
+msgstr "Cura设置"\r
+\r
+#: Cura/gui/preferencesDialog.py:84\r
+msgid "Machine settings"\r
+msgstr "机型设置"\r
+\r
+#: Cura/gui/preferencesDialog.py:95\r
+msgid "Printer head size"\r
+msgstr "打印头尺寸"\r
+\r
+#: Cura/gui/preferencesDialog.py:103\r
+#, python-format\r
+msgid "Extruder %d"\r
+msgstr "挤出机 %d"\r
+\r
+#: Cura/gui/preferencesDialog.py:107\r
+msgid "Communication settings"\r
+msgstr "通信设置"\r
+\r
+#: Cura/gui/preferencesDialog.py:154\r
+msgid "Cannot remove the last machine configuration in Cura"\r
+msgstr ""\r
+\r
+#: Cura/gui/preferencesDialog.py:154\r
+msgid "Machine remove error"\r
+msgstr "机型移除错误"\r
+\r
+#: Cura/gui/preferencesDialog.py:168\r
+msgid "Enter the new name:"\r
+msgstr "输入新的名称:"\r
+\r
+#: Cura/gui/preferencesDialog.py:168\r
+msgid "Change machine name"\r
+msgstr "更改机型名称"\r
+\r
+#: Cura/gui/printWindow.py:33 Cura/gui/printWindow.py:312\r
+#, python-format\r
+msgid "Printing on %s"\r
+msgstr "%s 正在打印"\r
+\r
+#: Cura/gui/printWindow.py:324\r
+msgid ""\r
+"Your computer is running on battery power.\n"\r
+"Connect your computer to AC power or your print might not finish."\r
+msgstr ""\r
+\r
+#: Cura/gui/printWindow.py:334\r
+msgid ""\r
+"InfoLine from printer connection\n"\r
+"InfoLine from dialog\n"\r
+"Extra line\n"\r
+"More lines for layout\n"\r
+"More lines for layout\n"\r
+"More lines for layout"\r
+msgstr ""\r
+\r
+#: Cura/gui/printWindow.py:336\r
+msgid "Connect"\r
+msgstr "连接"\r
+\r
+#: Cura/gui/printWindow.py:338 Cura/gui/sceneView.py:65\r
+msgid "Print"\r
+msgstr "打印"\r
+\r
+#: Cura/gui/printWindow.py:339\r
+msgid "Pause"\r
+msgstr "暂停"\r
+\r
+#: Cura/gui/printWindow.py:340\r
+msgid "Cancel print"\r
+msgstr "取消打印"\r
+\r
+#: Cura/gui/printWindow.py:341\r
+msgid "Error log"\r
+msgstr "错误日志"\r
+\r
+#: Cura/gui/sceneView.py:64\r
+msgid "Load"\r
+msgstr "Load"\r
+\r
+#: Cura/gui/sceneView.py:69\r
+msgid "Rotate"\r
+msgstr "Rotate"\r
+\r
+#: Cura/gui/sceneView.py:70\r
+msgid "Scale"\r
+msgstr "Scale"\r
+\r
+#: Cura/gui/sceneView.py:71\r
+msgid "Mirror"\r
+msgstr "Mirror"\r
+\r
+#: Cura/gui/sceneView.py:73 Cura/gui/sceneView.py:76\r
+msgid "Reset"\r
+msgstr "Reset"\r
+\r
+#: Cura/gui/sceneView.py:74\r
+msgid "Lay flat"\r
+msgstr "Lay flat"\r
+\r
+#: Cura/gui/sceneView.py:77\r
+msgid "To max"\r
+msgstr "To max"\r
+\r
+#: Cura/gui/sceneView.py:79\r
+msgid "Mirror X"\r
+msgstr "Mirror X"\r
+\r
+#: Cura/gui/sceneView.py:80\r
+msgid "Mirror Y"\r
+msgstr "Mirror Y"\r
+\r
+#: Cura/gui/sceneView.py:81\r
+msgid "Mirror Z"\r
+msgstr "Mirror Z"\r
+\r
+#: Cura/gui/sceneView.py:89\r
+msgid "Scale X"\r
+msgstr "Scale X"\r
+\r
+#: Cura/gui/sceneView.py:91\r
+msgid "Scale Y"\r
+msgstr "Scale Y"\r
+\r
+#: Cura/gui/sceneView.py:93\r
+msgid "Scale Z"\r
+msgstr "Scale Z"\r
+\r
+#: Cura/gui/sceneView.py:95\r
+msgid "Size X (mm)"\r
+msgstr "Size X (mm)"\r
+\r
+#: Cura/gui/sceneView.py:97\r
+msgid "Size Y (mm)"\r
+msgstr "Size Y (mm)"\r
+\r
+#: Cura/gui/sceneView.py:99\r
+msgid "Size Z (mm)"\r
+msgstr "Size Z (mm)"\r
+\r
+#: Cura/gui/sceneView.py:101\r
+msgid "Uniform scale"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:104\r
+msgid "View mode"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:104\r
+msgid "Normal"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:104\r
+msgid "Overhang"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:104\r
+msgid "Transparent"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:104\r
+msgid "X-Ray"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:104\r
+msgid "Layers"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:106\r
+msgid "Share on YouMagine"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:204\r
+msgid "Open 3D model"\r
+msgstr "打开3D模型"\r
+\r
+#: Cura/gui/sceneView.py:229\r
+msgid "Save 3D model"\r
+msgstr "保存3D模型"\r
+\r
+#: Cura/gui/sceneView.py:276 Cura/gui/sceneView.py:915\r
+#, python-format\r
+msgid "Print with %s"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:280\r
+msgid "Slice engine log..."\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:305 Cura/gui/sceneView.py:918\r
+msgid "Save toolpath"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:352\r
+msgid "The slicing engine reported the following"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:352\r
+msgid "Engine log..."\r
+msgstr "引擎记录..."\r
+\r
+#: Cura/gui/sceneView.py:491\r
+msgid "How many copies do you want?"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:491\r
+msgid "Number of copies"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:491\r
+msgid "Multiply"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:781\r
+msgid "Center on platform"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:782\r
+msgid "Delete object"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:783\r
+msgid "Multiply object"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:784\r
+msgid "Split object into parts"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:786\r
+msgid "Dual extrusion merge"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:788\r
+msgid "Delete all objects"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:789\r
+msgid "Reload all objects"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:912\r
+msgid "Toolpath to SD"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:1206\r
+msgid "Overhang view not working due to lack of OpenGL shaders support."\r
+msgstr ""\r
+\r
+#: Cura/gui/simpleMode.py:19\r
+msgid "High quality print"\r
+msgstr ""\r
+\r
+#: Cura/gui/simpleMode.py:20\r
+msgid "Normal quality print"\r
+msgstr ""\r
+\r
+#: Cura/gui/simpleMode.py:21\r
+msgid "Fast low quality print"\r
+msgstr ""\r
+\r
+#: Cura/gui/simpleMode.py:22\r
+msgid "Thin walled cup or vase"\r
+msgstr ""\r
+\r
+#: Cura/gui/simpleMode.py:32\r
+msgid "Print support structure"\r
+msgstr ""\r
+\r
+#: Cura/gui/simpleMode.py:37\r
+msgid "Select a quickprint profile:"\r
+msgstr ""\r
+\r
+#: Cura/gui/simpleMode.py:47\r
+msgid "Material:"\r
+msgstr ""\r
+\r
+#: Cura/gui/simpleMode.py:51\r
+msgid "Diameter:"\r
+msgstr ""\r
+\r
+#: Cura/gui/simpleMode.py:57\r
+msgid "Other:"\r
+msgstr ""\r
+\r
+#: Cura/gui/simpleMode.py:85\r
+msgid "Exterior Only"\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/imageToMesh.py:28\r
+msgid "Height (mm)"\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/imageToMesh.py:32\r
+msgid "Base (mm)"\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/imageToMesh.py:36\r
+msgid "Width (mm)"\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/imageToMesh.py:40\r
+msgid "Depth (mm)"\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/projector.py:42\r
+msgid "Edit"\r
+msgstr "编辑"\r
+\r
+#: Cura/gui/tools/projector.py:43\r
+msgid "Rectangle"\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/projector.py:44\r
+msgid "Circle"\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/projector.py:45\r
+msgid "Draw curves"\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:78\r
+msgid "Checking token"\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:82\r
+msgid "Failed to contact YouMagine.com"\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:82 Cura/gui/tools/youmagineGui.py:116\r
+#: Cura/gui/tools/youmagineGui.py:133 Cura/gui/tools/youmagineGui.py:140\r
+#: Cura/gui/tools/youmagineGui.py:148 Cura/gui/tools/youmagineGui.py:153\r
+msgid "YouMagine error."\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:100\r
+msgid "Cura is now authorized to share on YouMagine"\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:100\r
+msgid "YouMagine."\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:112\r
+msgid "Creating new design on YouMagine..."\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:116\r
+msgid "Failed to create a design, nothing uploaded!"\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:120\r
+#, python-format\r
+msgid "Building model %s..."\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:131\r
+#, python-format\r
+msgid "Uploading model %s..."\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:133 Cura/gui/tools/youmagineGui.py:140\r
+#: Cura/gui/tools/youmagineGui.py:148\r
+#, python-format\r
+msgid "Failed to upload %s!"\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:137\r
+#, python-format\r
+msgid "Uploading file %s..."\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:145\r
+#, python-format\r
+msgid "Uploading image %s..."\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:153\r
+msgid "Failed to upload snapshot!"\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:158\r
+msgid "Publishing design..."\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:230\r
+msgid "Request authorization from YouMagine"\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:231\r
+msgid "Paste token here"\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:237\r
+msgid ""\r
+"To share your designs on YouMagine\n"\r
+"you need an account on YouMagine.com\n"\r
+"and authorize Cura to access your account."\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:239\r
+msgid ""\r
+"This will open a browser window where you can\n"\r
+"authorize Cura to access your YouMagine account.\n"\r
+"You can revoke access at any time\n"\r
+"from YouMagine.com"\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:274\r
+msgid "Design name"\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:278\r
+msgid "Publish after upload"\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:279\r
+msgid "Share!"\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:287\r
+msgid "Add..."\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:289\r
+msgid "Webcam..."\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:299\r
+msgid ""\r
+"Directly publish the design after uploading.\n"\r
+"Without this check the design will not be public\n"\r
+"until you publish it yourself on YouMagine.com"\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:305\r
+msgid "Design name:"\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:307\r
+msgid "Description:"\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:309\r
+msgid "Category:"\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:311\r
+msgid "License:"\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:314\r
+msgid "Images:"\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:317\r
+msgid "Related design files:"\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:340\r
+msgid "The name cannot be empty"\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:340 Cura/gui/tools/youmagineGui.py:344\r
+msgid "New design error."\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:344\r
+msgid "The description cannot be empty"\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:370\r
+msgid "No webcam found on your system"\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:370\r
+msgid "Webcam error"\r
+msgstr ""\r
+\r
+#: Cura/gui/util/engineResultView.py:168\r
+#, python-format\r
+msgid "Loading toolpath for visualization (%d%%)"\r
+msgstr ""\r
+\r
+#: Cura/gui/util/openglGui.py:242\r
+msgid "An error has occurred during the 3D view drawing."\r
+msgstr ""\r
+\r
+#: Cura/gui/util/openglGui.py:250\r
+msgid "3D window error"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:170 Cura/util/profile.py:171 Cura/util/profile.py:172\r
+#: Cura/util/profile.py:200 Cura/util/profile.py:201 Cura/util/profile.py:202\r
+#: Cura/util/profile.py:204\r
+msgid "Quality"\r
+msgstr "打印质量"\r
+\r
+#: Cura/util/profile.py:170\r
+msgid "Layer height (mm)"\r
+msgstr "层厚(mm)"\r
+\r
+#: Cura/util/profile.py:170\r
+msgid ""\r
+"Layer height in millimeters.\n"\r
+"This is the most important setting to determine the quality of your print. "\r
+"Normal quality prints are 0.1mm, high quality is 0.06mm. You can go up to "\r
+"0.25mm with an Ultimaker for very fast prints at low quality."\r
+msgstr ""\r
+"每层的厚度\n"\r
+"这是最影响打印质量的设置\n"\r
+"普通质量可设置为0.2mm，高质量设为0.1mm。\n"\r
+"降低打印质量可以提升打印速度"\r
+\r
+#: Cura/util/profile.py:171\r
+msgid "Shell thickness (mm)"\r
+msgstr "壁厚(mm)"\r
+\r
+#: Cura/util/profile.py:171\r
+msgid ""\r
+"Thickness of the outside shell in the horizontal direction.\n"\r
+"This is used in combination with the nozzle size to define the number\n"\r
+"of perimeter lines and the thickness of those perimeter lines."\r
+msgstr ""\r
+"水平方向的边缘厚度\n"\r
+"通常需要结合你的喷嘴孔径设置成相应倍数，这个参数决定了边缘的走线次数和厚度"\r
+\r
+#: Cura/util/profile.py:172\r
+msgid "Enable retraction"\r
+msgstr "开启回退"\r
+\r
+#: Cura/util/profile.py:172\r
+msgid ""\r
+"Retract the filament when the nozzle is moving over a none-printed area. "\r
+"Details about the retraction can be configured in the advanced tab."\r
+msgstr ""\r
+"当在非打印区域移动喷头时，适当的回退丝能避免多余的挤出和拉丝\n"\r
+"在高级设置面板中有更多相关设置"\r
+\r
+#: Cura/util/profile.py:173 Cura/util/profile.py:174\r
+msgid "Fill"\r
+msgstr "填充"\r
+\r
+#: Cura/util/profile.py:173\r
+msgid "Bottom/Top thickness (mm)"\r
+msgstr "底层/顶层厚度(mm)"\r
+\r
+#: Cura/util/profile.py:173\r
+msgid ""\r
+"This controls the thickness of the bottom and top layers, the amount of "\r
+"solid layers put down is calculated by the layer thickness and this value.\n"\r
+"Having this value a multiple of the layer thickness makes sense. And keep it "\r
+"near your wall thickness to make an evenly strong part."\r
+msgstr ""\r
+"这个参数控制底层和顶层的厚度，通过层厚和这个参数计算需打印出的实心层的数量\n"\r
+"这个数值应是层厚的倍数。让这个参数接近你的壁厚，可以让模型强度更均匀"\r
+\r
+#: Cura/util/profile.py:174\r
+msgid "Fill Density (%)"\r
+msgstr "填充密度(%)"\r
+\r
+#: Cura/util/profile.py:174\r
+msgid ""\r
+"This controls how densely filled the insides of your print will be. For a "\r
+"solid part use 100%, for an empty part use 0%. A value around 20% is usually "\r
+"enough.\n"\r
+"This won't affect the outside of the print and only adjusts how strong the "\r
+"part becomes."\r
+msgstr ""\r
+"控制填充密度\n"\r
+"打印实心物体需设置为100%，空心物体设置为0%。通常使用20%填充率\n"\r
+"这个参数不会影响物体的外观，它一般用来调整物体的强度"\r
+\r
+#: Cura/util/profile.py:175\r
+msgid ""\r
+"The nozzle size is very important, this is used to calculate the line width "\r
+"of the infill, and used to calculate the amount of outside wall lines and "\r
+"thickness for the wall thickness you entered in the print settings."\r
+msgstr "喷嘴尺寸是相当重要的,它会被用于计算走线宽度、外壁走线次数和厚度"\r
+\r
+#: Cura/util/profile.py:176 Cura/util/profile.py:177 Cura/util/profile.py:178\r
+#: Cura/util/profile.py:179 Cura/util/profile.py:180 Cura/util/profile.py:181\r
+msgid "Speed and Temperature"\r
+msgstr "速度和温度"\r
+\r
+#: Cura/util/profile.py:176\r
+msgid "Print speed (mm/s)"\r
+msgstr "打印速度(mm/s)"\r
+\r
+#: Cura/util/profile.py:176\r
+msgid ""\r
+"Speed at which printing happens. A well adjusted Ultimaker can reach 150mm/"\r
+"s, but for good quality prints you want to print slower. Printing speed "\r
+"depends on a lot of factors. So you will be experimenting with optimal "\r
+"settings for this."\r
+msgstr ""\r
+"打印速度\n"\r
+"MostFun打印速度最快可达150mm/s，为获得更好的打印质量，我们建议打印速度设为"\r
+"80mm/s以下\n"\r
+"打印速度的设置要参考很多因素，你可以根据实际情况调试修改"\r
+\r
+#: Cura/util/profile.py:177\r
+msgid "Printing temperature (C)"\r
+msgstr "打印温度(C)"\r
+\r
+#: Cura/util/profile.py:177 Cura/util/profile.py:178 Cura/util/profile.py:179\r
+#: Cura/util/profile.py:180\r
+msgid ""\r
+"Temperature used for printing. Set at 0 to pre-heat yourself.\n"\r
+"For PLA a value of 210C is usually used.\n"\r
+"For ABS a value of 230C or higher is required."\r
+msgstr ""\r
+"打印时的喷头温度\n"\r
+"PLA通常设置为210C\n"\r
+"ABS通常设置为230C"\r
+\r
+#: Cura/util/profile.py:178\r
+msgid "2nd nozzle temperature (C)"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:179\r
+msgid "3th nozzle temperature (C)"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:180\r
+msgid "4th nozzle temperature (C)"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:181\r
+msgid "Bed temperature (C)"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:181\r
+msgid ""\r
+"Temperature used for the heated printer bed. Set at 0 to pre-heat yourself."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:182 Cura/util/profile.py:183\r
+msgid "None"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:182\r
+msgid "Touching buildplate"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:182\r
+msgid "Everywhere"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:182 Cura/util/profile.py:183 Cura/util/profile.py:184\r
+#: Cura/util/profile.py:224 Cura/util/profile.py:225 Cura/util/profile.py:226\r
+#: Cura/util/profile.py:227 Cura/util/profile.py:228\r
+msgid "Support"\r
+msgstr "支撑"\r
+\r
+#: Cura/util/profile.py:182\r
+msgid "Support type"\r
+msgstr "支撑类型"\r
+\r
+#: Cura/util/profile.py:182\r
+msgid ""\r
+"Type of support structure build.\n"\r
+"\"Touching buildplate\" is the most commonly used support setting.\n"\r
+"\n"\r
+"None does not do any support.\n"\r
+"Touching buildplate only creates support where the support structure will "\r
+"touch the build platform.\n"\r
+"Everywhere creates support even on top of parts of the model."\r
+msgstr ""\r
+"支撑结构类型。\n"\r
+"通常使用\"Touching buildplate\"建立支撑 \n"\r
+"选择 None 不会建立支撑\n"\r
+"选择Touching buildplate 仅会生成接触到打印平台的支撑结构\n"\r
+"选择 Everywhere 会在模型上所有的悬空位置创建支撑结构"\r
+\r
+#: Cura/util/profile.py:183 Cura/util/profile.py:232\r
+msgid "Brim"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:183 Cura/util/profile.py:233 Cura/util/profile.py:234\r
+#: Cura/util/profile.py:235 Cura/util/profile.py:236 Cura/util/profile.py:237\r
+#: Cura/util/profile.py:238 Cura/util/profile.py:239 Cura/util/profile.py:240\r
+msgid "Raft"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:183\r
+msgid "Platform adhesion type"\r
+msgstr "粘附平台"\r
+\r
+#: Cura/util/profile.py:183\r
+msgid ""\r
+"Different options that help in preventing corners from lifting due to "\r
+"warping.\n"\r
+"Brim adds a single layer thick flat area around your object which is easy to "\r
+"cut off afterwards, and it is the recommended option.\n"\r
+"Raft adds a thick raster below the object and a thin interface between this "\r
+"and your object.\n"\r
+"(Note that enabling the brim or raft disables the skirt)"\r
+msgstr ""\r
+"开启这个选项可以防止底面起翘\n"\r
+"Brim会在模型底边周围增加数圈薄层,推荐使用这个选项\n"\r
+"Raft会打印模型前打印一个网状底座\n"\r
+"（注意：开启粘附平台后,会关闭打印开始前的边缘走线功能）"\r
+\r
+#: Cura/util/profile.py:184\r
+msgid "Both"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:184\r
+msgid "First extruder"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:184\r
+msgid "Second extruder"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:184\r
+msgid "Support dual extrusion"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:184\r
+msgid ""\r
+"Which extruder to use for support material, for break-away support you can "\r
+"use both extruders.\n"\r
+"But if one of the materials is more expensive then the other you could "\r
+"select an extruder to use for support material. This causes more extruder "\r
+"switches.\n"\r
+"You can also use the 2nd extruder for soluble support materials."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:185 Cura/util/profile.py:186 Cura/util/profile.py:187\r
+msgid "Dual extrusion"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:185\r
+msgid "Wipe&prime tower"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:185\r
+msgid ""\r
+"The wipe-tower is a tower printed on every layer when switching between "\r
+"nozzles.\n"\r
+"The old nozzle is wiped off on the tower before the new nozzle is used to "\r
+"print the 2nd color."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:186\r
+msgid "Wipe&prime tower volume per layer (mm3)"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:186\r
+msgid ""\r
+"The amount of material put in the wipe/prime tower.\n"\r
+"This is done in volume because in general you want to extrude a\n"\r
+"certain amount of volume to get the extruder going, independent on the layer "\r
+"height.\n"\r
+"This means that with thinner layers, your tower gets bigger."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:187\r
+msgid "Ooze shield"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:187\r
+msgid ""\r
+"The ooze shield is a 1 line thick shell around the object which stands a few "\r
+"mm from the object.\n"\r
+"This shield catches any oozing from the unused nozzle in dual-extrusion."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:188 Cura/util/profile.py:189 Cura/util/profile.py:190\r
+#: Cura/util/profile.py:191 Cura/util/profile.py:192\r
+msgid "Filament"\r
+msgstr "打印材料"\r
+\r
+#: Cura/util/profile.py:188\r
+msgid "Diameter (mm)"\r
+msgstr "直径(mm)"\r
+\r
+#: Cura/util/profile.py:188\r
+msgid ""\r
+"Diameter of your filament, as accurately as possible.\n"\r
+"If you cannot measure this value you will have to calibrate it, a higher "\r
+"number means less extrusion, a smaller number generates more extrusion."\r
+msgstr ""\r
+"打印耗材的直径\n"\r
+"MostFun Sail使用的耗材的直径为1.75mm"\r
+\r
+#: Cura/util/profile.py:189\r
+msgid "Diameter2 (mm)"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:189\r
+msgid ""\r
+"Diameter of your filament for the 2nd nozzle. Use 0 to use the same diameter "\r
+"as for nozzle 1."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:190\r
+msgid "Diameter3 (mm)"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:190\r
+msgid ""\r
+"Diameter of your filament for the 3th nozzle. Use 0 to use the same diameter "\r
+"as for nozzle 1."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:191\r
+msgid "Diameter4 (mm)"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:191\r
+msgid ""\r
+"Diameter of your filament for the 4th nozzle. Use 0 to use the same diameter "\r
+"as for nozzle 1."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:192\r
+msgid "Flow (%)"\r
+msgstr "流量(%)"\r
+\r
+#: Cura/util/profile.py:192\r
+msgid ""\r
+"Flow compensation, the amount of material extruded is multiplied by this "\r
+"value"\r
+msgstr "流量补偿，最终挤出量是设定的挤出量乘以这个值"\r
+\r
+#: Cura/util/profile.py:193 Cura/util/profile.py:194 Cura/util/profile.py:195\r
+#: Cura/util/profile.py:196 Cura/util/profile.py:197 Cura/util/profile.py:198\r
+#: Cura/util/profile.py:199\r
+msgid "Retraction"\r
+msgstr "回退"\r
+\r
+#: Cura/util/profile.py:193\r
+msgid "Speed (mm/s)"\r
+msgstr "回退速度(mm/s)"\r
+\r
+#: Cura/util/profile.py:193\r
+msgid ""\r
+"Speed at which the filament is retracted, a higher retraction speed works "\r
+"better. But a very high retraction speed can lead to filament grinding."\r
+msgstr ""\r
+"回退丝时的速度\n"\r
+"设定较高的速度能达到较好的效果。但是过高的速度可能会导致丝的磨损"\r
+\r
+#: Cura/util/profile.py:194\r
+msgid "Distance (mm)"\r
+msgstr "回退长度(mm)"\r
+\r
+#: Cura/util/profile.py:194\r
+msgid ""\r
+"Amount of retraction, set at 0 for no retraction at all. A value of 4.5mm "\r
+"seems to generate good results."\r
+msgstr ""\r
+"丝回退的长度\n"\r
+"设置为0时不会回退，在MostFun Sail设置为3mm时效果比较好"\r
+\r
+#: Cura/util/profile.py:195\r
+msgid "Dual extrusion switch amount (mm)"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:195\r
+msgid ""\r
+"Amount of retraction when switching nozzle with dual-extrusion, set at 0 for "\r
+"no retraction at all. A value of 16.0mm seems to generate good results."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:196\r
+msgid "Minimum travel (mm)"\r
+msgstr "最小移动距离(mm)"\r
+\r
+#: Cura/util/profile.py:196\r
+msgid ""\r
+"Minimum amount of travel needed for a retraction to happen at all. To make "\r
+"sure you do not get a lot of retractions in a small area."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:197\r
+msgid "Enable combing"\r
+msgstr "开启梳理"\r
+\r
+#: Cura/util/profile.py:197\r
+msgid ""\r
+"Combing is the act of avoiding holes in the print for the head to travel "\r
+"over. If combing is disabled the printer head moves straight from the start "\r
+"point to the end point and it will always retract."\r
+msgstr ""\r
+"梳理功能可以避免喷头移动后产生的孔\n"\r
+"如果关闭了该功能，打印头会在移动过程中一直处在回退状态"\r
+\r
+#: Cura/util/profile.py:198\r
+msgid "Minimal extrusion before retracting (mm)"\r
+msgstr "回退前最小挤出量(mm)"\r
+\r
+#: Cura/util/profile.py:198\r
+msgid ""\r
+"The minimal amount of extrusion that needs to be done before retracting "\r
+"again if a retraction needs to happen before this minimal is reached the "\r
+"retraction is ignored.\n"\r
+"This avoids retracting a lot on the same piece of filament which flattens "\r
+"the filament and causes grinding issues."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:199\r
+msgid "Z hop when retracting (mm)"\r
+msgstr "回退时Z轴抬起(mm)"\r
+\r
+#: Cura/util/profile.py:199\r
+msgid ""\r
+"When a retraction is done, the head is lifted by this amount to travel over "\r
+"the print. A value of 0.075 works well. This feature has a lot of positive "\r
+"effect on delta towers."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:200\r
+msgid "Initial layer thickness (mm)"\r
+msgstr "初始层厚 (mm)"\r
+\r
+#: Cura/util/profile.py:200\r
+msgid ""\r
+"Layer thickness of the bottom layer. A thicker bottom layer makes sticking "\r
+"to the bed easier. Set to 0.0 to have the bottom layer thickness the same as "\r
+"the other layers."\r
+msgstr ""\r
+"底层的厚度。较厚的底部能使材料和打印平台粘附得更好。设置为0.0则使用层厚作为初"\r
+"始层厚度"\r
+\r
+#: Cura/util/profile.py:201\r
+msgid "Initial layer line width (%)"\r
+msgstr "初始层线宽(%)"\r
+\r
+#: Cura/util/profile.py:201\r
+msgid ""\r
+"Extra width factor for the extrusion on the first layer, on some printers "\r
+"it's good to have wider extrusion on the first layer to get better bed "\r
+"adhesion."\r
+msgstr ""\r
+"下沉模型\n"\r
+"下沉进平台的部分不会被打印出来。当模型底部不平整或者太大时，可以使用这个参"\r
+"数，切除一部分模型再打印"\r
+\r
+#: Cura/util/profile.py:202\r
+msgid "Cut off object bottom (mm)"\r
+msgstr "底层切除(mm)"\r
+\r
+#: Cura/util/profile.py:202\r
+msgid ""\r
+"Sinks the object into the platform, this can be used for objects that do not "\r
+"have a flat bottom and thus create a too small first layer."\r
+msgstr ""\r
+"下沉模型\n"\r
+"下沉进平台的部分不会被打印出来。当模型底部不平整或者太大时，可以使用这个参"\r
+"数，切除一部分模型再打印"\r
+\r
+#: Cura/util/profile.py:204\r
+msgid "Dual extrusion overlap (mm)"\r
+msgstr "两次挤出重叠(mm)"\r
+\r
+#: Cura/util/profile.py:204\r
+msgid ""\r
+"Add a certain amount of overlapping extrusion on dual-extrusion prints. This "\r
+"bonds the different colors together."\r
+msgstr "添加一定的重叠挤出,这样能使两个不同的颜色融合的更好"\r
+\r
+#: Cura/util/profile.py:205 Cura/util/profile.py:206 Cura/util/profile.py:207\r
+#: Cura/util/profile.py:208 Cura/util/profile.py:209\r
+msgid "Speed"\r
+msgstr "速度"\r
+\r
+#: Cura/util/profile.py:205\r
+msgid "Travel speed (mm/s)"\r
+msgstr "移动速度 (mm/s)"\r
+\r
+#: Cura/util/profile.py:205\r
+msgid ""\r
+"Speed at which travel moves are done, a well built Ultimaker can reach "\r
+"speeds of 250mm/s. But some machines might miss steps then."\r
+msgstr ""\r
+"移动喷头时的速度\n"\r
+"此移动速度指非打印状态下的移动速度\n"\r
+"建议不要超过150mm/s,否则可能造成电机丢步"\r
+\r
+#: Cura/util/profile.py:206\r
+msgid "Bottom layer speed (mm/s)"\r
+msgstr "底层速度 (mm/s)"\r
+\r
+#: Cura/util/profile.py:206\r
+msgid ""\r
+"Print speed for the bottom layer, you want to print the first layer slower "\r
+"so it sticks better to the printer bed."\r
+msgstr ""\r
+"打印底层的速度\n"\r
+"这个值通常会设置的很低，这样能使底层和平台粘附的更好"\r
+\r
+#: Cura/util/profile.py:207\r
+msgid "Infill speed (mm/s)"\r
+msgstr "填充速度 (mm/s)"\r
+\r
+#: Cura/util/profile.py:207\r
+msgid ""\r
+"Speed at which infill parts are printed. If set to 0 then the print speed is "\r
+"used for the infill. Printing the infill faster can greatly reduce printing "\r
+"time, but this can negatively affect print quality."\r
+msgstr ""\r
+"打印内部填充时的速度\n"\r
+"当设置为0时，会使用打印速度作为填充速度。高速打印填充能节省很多打印时间，但是"\r
+"可能会对打印质量照成一定消极影响"\r
+\r
+#: Cura/util/profile.py:208\r
+msgid "Outer shell speed (mm/s)"\r
+msgstr "外壳速度 (mm/s)"\r
+\r
+#: Cura/util/profile.py:208\r
+msgid ""\r
+"Speed at which outer shell is printed. If set to 0 then the print speed is "\r
+"used. Printing the outer shell at a lower speed improves the final skin "\r
+"quality. However, having a large difference between the inner shell speed "\r
+"and the outer shell speed will effect quality in a negative way."\r
+msgstr ""\r
+"打印机外壳时的速度\n"\r
+"当设置为0时，会使用打印速度作为外壳速度\n"\r
+"使用较低的打印速度可以提高模型打印质量，但是如果外壳和内部的打印速度相差较"\r
+"大，可能会对打印质量有一些消极影响"\r
+\r
+#: Cura/util/profile.py:209\r
+msgid "Inner shell speed (mm/s)"\r
+msgstr "内壁速度 (mm/s)"\r
+\r
+#: Cura/util/profile.py:209\r
+msgid ""\r
+"Speed at which inner shells are printed. If set to 0 then the print speed is "\r
+"used. Printing the inner shell faster then the outer shell will reduce "\r
+"printing time. It is good to set this somewhere in between the outer shell "\r
+"speed and the infill/printing speed."\r
+msgstr ""\r
+"打印内壁时的速度\n"\r
+"当设置为0时，会使用打印速度作为内壁速度\n"\r
+"使用较高的打印机速度可以减少模型的打印时间，需要设置好外壳速度、打印速度、填"\r
+"充速度之间的关系"\r
+\r
+#: Cura/util/profile.py:210 Cura/util/profile.py:211 Cura/util/profile.py:216\r
+#: Cura/util/profile.py:217 Cura/util/profile.py:218 Cura/util/profile.py:219\r
+#: Cura/util/profile.py:220\r
+msgid "Cool"\r
+msgstr "冷却"\r
+\r
+#: Cura/util/profile.py:210\r
+msgid "Minimal layer time (sec)"\r
+msgstr "每层最小打印时间(sec)"\r
+\r
+#: Cura/util/profile.py:210\r
+msgid ""\r
+"Minimum time spent in a layer, gives the layer time to cool down before the "\r
+"next layer is put on top. If the layer will be placed down too fast the "\r
+"printer will slow down to make sure it has spent at least this amount of "\r
+"seconds printing this layer."\r
+msgstr ""\r
+"打印每层至少要耗费的时间\n"\r
+"在打印下一层前留一定时间让当前层冷却。如果当前层会被很快打印完，那么打印机会"\r
+"适当降低速度，以保证有这个设定时间"\r
+\r
+#: Cura/util/profile.py:211\r
+msgid "Enable cooling fan"\r
+msgstr "开启风扇冷却"\r
+\r
+#: Cura/util/profile.py:211\r
+msgid ""\r
+"Enable the cooling fan during the print. The extra cooling from the cooling "\r
+"fan is essential during faster prints."\r
+msgstr ""\r
+"在打印期间开启风扇冷却\n"\r
+"在快速打印时开启风扇冷却是很有必要的"\r
+\r
+#: Cura/util/profile.py:213\r
+msgid "Line count"\r
+msgstr "线数"\r
+\r
+#: Cura/util/profile.py:213\r
+msgid ""\r
+"The skirt is a line drawn around the object at the first layer. This helps "\r
+"to prime your extruder, and to see if the object fits on your platform.\n"\r
+"Setting this to 0 will disable the skirt. Multiple skirt lines can help "\r
+"priming your extruder better for small objects."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:214\r
+msgid "Start distance (mm)"\r
+msgstr "开始距离(mm)"\r
+\r
+#: Cura/util/profile.py:214\r
+msgid ""\r
+"The distance between the skirt and the first layer.\n"\r
+"This is the minimal distance, multiple skirt lines will be put outwards from "\r
+"this distance."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:215\r
+msgid "Minimal length (mm)"\r
+msgstr "最小距离(mm)"\r
+\r
+#: Cura/util/profile.py:215\r
+msgid ""\r
+"The minimal length of the skirt, if this minimal length is not reached it "\r
+"will add more skirt lines to reach this minimal lenght.\n"\r
+"Note: If the line count is set to 0 this is ignored."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:216\r
+msgid "Fan full on at height (mm)"\r
+msgstr "风扇全速开启高度(mm)"\r
+\r
+#: Cura/util/profile.py:216\r
+msgid ""\r
+"The height at which the fan is turned on completely. For the layers below "\r
+"this the fan speed is scaled linearly with the fan off at layer 0."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:217\r
+msgid "Fan speed min (%)"\r
+msgstr "风扇最小速度(%)"\r
+\r
+#: Cura/util/profile.py:217\r
+msgid ""\r
+"When the fan is turned on, it is enabled at this speed setting. If cool "\r
+"slows down the layer, the fan is adjusted between the min and max speed. "\r
+"Minimal fan speed is used if the layer is not slowed down due to cooling."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:218\r
+msgid "Fan speed max (%)"\r
+msgstr "风扇最大速度(%)"\r
+\r
+#: Cura/util/profile.py:218\r
+msgid ""\r
+"When the fan is turned on, it is enabled at this speed setting. If cool "\r
+"slows down the layer, the fan is adjusted between the min and max speed. "\r
+"Maximal fan speed is used if the layer is slowed down due to cooling by more "\r
+"than 200%."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:219\r
+msgid "Minimum speed (mm/s)"\r
+msgstr "最小速度 (mm/s)"\r
+\r
+#: Cura/util/profile.py:219\r
+msgid ""\r
+"The minimal layer time can cause the print to slow down so much it starts to "\r
+"ooze. The minimal feedrate protects against this. Even if a print gets "\r
+"slowed down it will never be slower than this minimal speed."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:220\r
+msgid "Cool head lift"\r
+msgstr "喷头移开冷却"\r
+\r
+#: Cura/util/profile.py:220\r
+msgid ""\r
+"Lift the head if the minimal speed is hit because of cool slowdown, and wait "\r
+"the extra time so the minimal layer time is always hit."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:221 Cura/util/profile.py:222 Cura/util/profile.py:223\r
+msgid "Infill"\r
+msgstr "填充"\r
+\r
+#: Cura/util/profile.py:221\r
+msgid "Solid infill top"\r
+msgstr "填充顶层"\r
+\r
+#: Cura/util/profile.py:221\r
+msgid ""\r
+"Create a solid top surface, if set to false the top is filled with the fill "\r
+"percentage. Useful for cups/vases."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:222\r
+msgid "Solid infill bottom"\r
+msgstr "填充底层"\r
+\r
+#: Cura/util/profile.py:222\r
+msgid ""\r
+"Create a solid bottom surface, if set to false the bottom is filled with the "\r
+"fill percentage. Useful for buildings."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:223\r
+msgid "Infill overlap (%)"\r
+msgstr "填充重合(%)"\r
+\r
+#: Cura/util/profile.py:223\r
+msgid ""\r
+"Amount of overlap between the infill and the walls. There is a slight "\r
+"overlap with the walls and the infill so the walls connect firmly to the "\r
+"infill."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:224\r
+msgid "Structure type"\r
+msgstr "支撑类型"\r
+\r
+#: Cura/util/profile.py:224\r
+msgid ""\r
+"The type of support structure.\n"\r
+"Grid is very strong and can come off in 1 piece, however, sometimes it is "\r
+"too strong.\n"\r
+"Lines are single walled lines that break off one at a time. Which is more "\r
+"work to remove, but as it is less strong it does work better on tricky "\r
+"prints."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:225\r
+msgid "Overhang angle for support (deg)"\r
+msgstr "支撑临界角(deg)"\r
+\r
+#: Cura/util/profile.py:225\r
+msgid ""\r
+"The minimal angle that overhangs need to have to get support. With 0 degree "\r
+"being horizontal and 90 degree being vertical."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:226\r
+msgid "Fill amount (%)"\r
+msgstr "支撑密度"\r
+\r
+#: Cura/util/profile.py:226\r
+#, python-format\r
+msgid ""\r
+"Amount of infill structure in the support material, less material gives "\r
+"weaker support which is easier to remove. 15% seems to be a good average."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:227\r
+msgid "Distance X/Y (mm)"\r
+msgstr "X/Y轴距离"\r
+\r
+#: Cura/util/profile.py:227\r
+msgid ""\r
+"Distance of the support material from the print, in the X/Y directions.\n"\r
+"0.7mm gives a nice distance from the print so the support does not stick to "\r
+"the print."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:228\r
+msgid "Distance Z (mm)"\r
+msgstr "Z轴距离"\r
+\r
+#: Cura/util/profile.py:228\r
+msgid ""\r
+"Distance from the top/bottom of the support to the print. A small gap here "\r
+"makes it easier to remove the support but makes the print a bit uglier.\n"\r
+"0.15mm gives a good seperation of the support material."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:229\r
+msgid "Spiralize the outer contour"\r
+msgstr "平滑抬升"\r
+\r
+#: Cura/util/profile.py:229\r
+msgid ""\r
+"Spiralize is smoothing out the Z move of the outer edge. This will create a "\r
+"steady Z increase over the whole print. This feature turns a solid object "\r
+"into a single walled print with a solid bottom.\n"\r
+"This feature used to be called Joris in older versions."\r
+msgstr ""\r
+"开启后，可以螺旋状打印表面\n"\r
+"打印出个表面非常光滑，但会丢失内部填充"\r
+\r
+#: Cura/util/profile.py:230\r
+msgid "Only follow mesh surface"\r
+msgstr "平滑表面"\r
+\r
+#: Cura/util/profile.py:230\r
+msgid ""\r
+"Only follow the mesh surfaces of the 3D model, do not do anything else. No "\r
+"infill, no top/bottom, nothing."\r
+msgstr "开启后仅打印表面，顶、底、内部填充都会丢失"\r
+\r
+#: Cura/util/profile.py:232\r
+msgid "Brim line amount"\r
+msgstr "边沿走线圈数"\r
+\r
+#: Cura/util/profile.py:232\r
+msgid ""\r
+"The amount of lines used for a brim, more lines means a larger brim which "\r
+"sticks better, but this also makes your effective print area smaller."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:233\r
+msgid "Extra margin (mm)"\r
+msgstr "额外边缘(mm)"\r
+\r
+#: Cura/util/profile.py:233\r
+msgid ""\r
+"If the raft is enabled, this is the extra raft area around the object which "\r
+"is also rafted. Increasing this margin will create a stronger raft while "\r
+"using more material and leaving less area for your print."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:234\r
+msgid "Line spacing (mm)"\r
+msgstr "走线间隔(mm)"\r
+\r
+#: Cura/util/profile.py:234\r
+msgid ""\r
+"When you are using the raft this is the distance between the centerlines of "\r
+"the raft line."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:235\r
+msgid "Base thickness (mm)"\r
+msgstr "基底层厚度(mm)"\r
+\r
+#: Cura/util/profile.py:235\r
+msgid ""\r
+"When you are using the raft this is the thickness of the base layer which is "\r
+"put down."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:236\r
+msgid "Base line width (mm)"\r
+msgstr "基底层走线宽度(mm)"\r
+\r
+#: Cura/util/profile.py:236\r
+msgid ""\r
+"When you are using the raft this is the width of the base layer lines which "\r
+"are put down."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:237\r
+msgid "Interface thickness (mm)"\r
+msgstr "接触层厚度(mm)"\r
+\r
+#: Cura/util/profile.py:237\r
+msgid ""\r
+"When you are using the raft this is the thickness of the interface layer "\r
+"which is put down."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:238\r
+msgid "Interface line width (mm)"\r
+msgstr "接触层走线宽度 (mm)"\r
+\r
+#: Cura/util/profile.py:238\r
+msgid ""\r
+"When you are using the raft this is the width of the interface layer lines "\r
+"which are put down."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:239\r
+msgid "Airgap"\r
+msgstr "拼合间隙"\r
+\r
+#: Cura/util/profile.py:239\r
+msgid ""\r
+"Gap between the last layer of the raft and the first printing layer. A small "\r
+"gap of 0.2mm works wonders on PLA and makes the raft easy to remove."\r
+msgstr ""\r
+"在基底和模型之间的间隙距离\n"\r
+"这个间隙能让模型更容易取下，使用PLA建议设为0.2mm"\r
+\r
+#: Cura/util/profile.py:240\r
+msgid "Surface layers"\r
+msgstr "表层"\r
+\r
+#: Cura/util/profile.py:240\r
+msgid ""\r
+"Amount of surface layers put on top of the raft, these are fully filled "\r
+"layers on which the model is printed."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:241 Cura/util/profile.py:242 Cura/util/profile.py:243\r
+#: Cura/util/profile.py:244\r
+msgid "Fix horrible"\r
+msgstr "缺陷修复"\r
+\r
+#: Cura/util/profile.py:241\r
+msgid "Combine everything (Type-A)"\r
+msgstr "闭合面片(Type-A)"\r
+\r
+#: Cura/util/profile.py:241 Cura/util/profile.py:242\r
+msgid ""\r
+"This expert option adds all parts of the model together. The result is "\r
+"usually that internal cavities disappear. Depending on the model this can be "\r
+"intended or not. Enabling this option is at your own risk. Type-A is "\r
+"dependent on the model normals and tries to keep some internal holes intact. "\r
+"Type-B ignores all internal holes and only keeps the outside shape per layer."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:242\r
+msgid "Combine everything (Type-B)"\r
+msgstr "闭合面片(Type-B)"\r
+\r
+#: Cura/util/profile.py:243\r
+msgid "Keep open faces"\r
+msgstr "保持开放面"\r
+\r
+#: Cura/util/profile.py:243\r
+msgid ""\r
+"This expert option keeps all the open bits of the model intact. Normally "\r
+"Cura tries to stitch up small holes and remove everything with big holes, "\r
+"but this option keeps bits that are not properly part of anything and just "\r
+"goes with whatever is left. This option is usually not what you want, but it "\r
+"might enable you to slice models otherwise failing to produce proper paths.\n"\r
+"As with all \"Fix horrible\" options, results may vary and use at your own "\r
+"risk."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:244\r
+msgid "Extensive stitching"\r
+msgstr "泛拼接"\r
+\r
+#: Cura/util/profile.py:244\r
+msgid ""\r
+"Extensive stitching tries to fix up open holes in the model by closing the "\r
+"hole with touching polygons. This algorthm is quite expensive and could "\r
+"introduce a lot of processing time.\n"\r
+"As with all \"Fix horrible\" options, results may vary and use at your own "\r
+"risk."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:470\r
+msgid "Save profile on slice"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:470\r
+msgid ""\r
+"When slicing save the profile as [stl_file]_profile.ini next to the model."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:471\r
+msgid "Cost (price/kg)"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:471\r
+msgid "Cost of your filament per kg, to estimate the cost of the final print."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:472\r
+msgid "Cost (price/m)"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:472\r
+msgid ""\r
+"Cost of your filament per meter, to estimate the cost of the final print."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:473\r
+msgid "Auto detect SD card drive"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:473\r
+msgid ""\r
+"Auto detect the SD card. You can disable this because on some systems "\r
+"external hard-drives or USB sticks are detected as SD card."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:474\r
+msgid "Check for updates"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:474\r
+msgid "Check for newer versions of Cura on startup"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:475\r
+msgid "Send usage statistics"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:475\r
+msgid "Submit anonymous usage information to improve future versions of Cura"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:477\r
+msgid "Density (kg/m3)"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:477\r
+msgid ""\r
+"Weight of the filament per m3. Around 1240 for PLA. And around 1040 for ABS. "\r
+"This value is used to estimate the weight if the filament used for the print."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:478\r
+msgid ""\r
+"Change the language in which Cura runs. Switching language requires a "\r
+"restart of Cura"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:481\r
+msgid "Model colour"\r
+msgstr "模型颜色"\r
+\r
+#: Cura/util/profile.py:481\r
+msgid "Display color for first extruder"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:482\r
+msgid "Model colour (2)"\r
+msgstr "模型颜色(2)"\r
+\r
+#: Cura/util/profile.py:482\r
+msgid "Display color for second extruder"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:483\r
+msgid "Model colour (3)"\r
+msgstr "模型颜色(3)"\r
+\r
+#: Cura/util/profile.py:483\r
+msgid "Display color for third extruder"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:484\r
+msgid "Model colour (4)"\r
+msgstr "模型颜色(4)"\r
+\r
+#: Cura/util/profile.py:484\r
+msgid "Display color for forth extruder"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:485\r
+msgid "Printing window type"\r
+msgstr "打印窗口类型"\r
+\r
+#: Cura/util/profile.py:485\r
+msgid "Select the interface used for USB printing."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:497\r
+msgid "Maximum width (mm)"\r
+msgstr "最大宽度 (mm)"\r
+\r
+#: Cura/util/profile.py:497 Cura/util/profile.py:498 Cura/util/profile.py:499\r
+msgid "Size of the machine in mm"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:498\r
+msgid "Maximum depth (mm)"\r
+msgstr "最大深度(mm)"\r
+\r
+#: Cura/util/profile.py:499\r
+msgid "Maximum height (mm)"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:500\r
+msgid "Machine center 0,0"\r
+msgstr "平台中心 0,0"\r
+\r
+#: Cura/util/profile.py:500\r
+msgid ""\r
+"Machines firmware defines the center of the bed as 0,0 instead of the front "\r
+"left corner."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:501\r
+msgid "Build area shape"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:501\r
+msgid "The shape of machine build area."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:503\r
+msgid ""\r
+"If you have an heated bed, this enabled heated bed settings (requires "\r
+"restart)"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:504\r
+msgid "GCode Flavor"\r
+msgstr "Gcode类型"\r
+\r
+#: Cura/util/profile.py:504\r
+msgid ""\r
+"Flavor of generated GCode.\n"\r
+"RepRap is normal 5D GCode which works on Marlin/Sprinter based firmwares.\n"\r
+"UltiGCode is a variation of the RepRap GCode which puts more settings in the "\r
+"machine instead of the slicer.\n"\r
+"MakerBot GCode has a few changes in the way GCode is generated, but still "\r
+"requires MakerWare to generate to X3G.\n"\r
+"BFB style generates RPM based code.\n"\r
+"Mach3 uses A,B,C instead of E for extruders."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:505\r
+msgid "Extruder count"\r
+msgstr "挤出机数量"\r
+\r
+#: Cura/util/profile.py:505\r
+msgid "Amount of extruders in your machine."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:506 Cura/util/profile.py:508 Cura/util/profile.py:510\r
+msgid "Offset X"\r
+msgstr "X补偿"\r
+\r
+#: Cura/util/profile.py:506 Cura/util/profile.py:507\r
+msgid "The offset of your secondary extruder compared to the primary."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:507 Cura/util/profile.py:509 Cura/util/profile.py:511\r
+msgid "Offset Y"\r
+msgstr "Y补偿"\r
+\r
+#: Cura/util/profile.py:508 Cura/util/profile.py:509\r
+msgid "The offset of your tertiary extruder compared to the primary."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:510 Cura/util/profile.py:511\r
+msgid "The offset of your forth extruder compared to the primary."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:512\r
+msgid "E-Steps per 1mm filament"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:512\r
+msgid ""\r
+"Amount of steps per mm filament extrusion. If set to 0 then this value is "\r
+"ignored and the value in your firmware is used."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:513\r
+msgid "Serial port"\r
+msgstr "串口"\r
+\r
+#: Cura/util/profile.py:513\r
+msgid "Serial port to use for communication with the printer"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:515\r
+msgid "Baudrate"\r
+msgstr "波特率"\r
+\r
+#: Cura/util/profile.py:515\r
+msgid ""\r
+"Speed of the serial port communication\n"\r
+"Needs to match your firmware settings\n"\r
+"Common values are 250000, 115200, 57600"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:518\r
+msgid "Head size towards X min (mm)"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:518\r
+msgid ""\r
+"The head size when printing multiple objects, measured from the tip of the "\r
+"nozzle towards the outer part of the head. 75mm for an Ultimaker if the fan "\r
+"is on the left side."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:519\r
+msgid "Head size towards Y min (mm)"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:519 Cura/util/profile.py:520\r
+msgid ""\r
+"The head size when printing multiple objects, measured from the tip of the "\r
+"nozzle towards the outer part of the head. 18mm for an Ultimaker if the fan "\r
+"is on the left side."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:520\r
+msgid "Head size towards X max (mm)"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:521\r
+msgid "Head size towards Y max (mm)"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:521\r
+msgid ""\r
+"The head size when printing multiple objects, measured from the tip of the "\r
+"nozzle towards the outer part of the head. 35mm for an Ultimaker if the fan "\r
+"is on the left side."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:522\r
+msgid "Printer gantry height (mm)"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:522\r
+msgid ""\r
+"The height of the gantry holding up the printer head. If an object is higher "\r
+"then this then you cannot print multiple objects one for one. 60mm for an "\r
+"Ultimaker."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:524\r
+#, python-format\r
+msgid "More flow than 150% is rare and usually not recommended."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:525\r
+#, python-format\r
+msgid "Less flow than 50% is rare and usually not recommended."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:526\r
+#, python-format\r
+msgid ""\r
+"Thicker layers then %.2fmm (80%% nozzle size) usually give bad results and "\r
+"are not recommended."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:528\r
+msgid ""\r
+"It is highly unlikely that your machine can achieve a printing speed above "\r
+"150mm/s"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:530 Cura/util/profile.py:531 Cura/util/profile.py:532\r
+#: Cura/util/profile.py:533\r
+msgid "Temperatures above 260C could damage your machine, be careful!"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:534 Cura/util/profile.py:535 Cura/util/profile.py:536\r
+#: Cura/util/profile.py:537\r
+msgid ""\r
+"Are you sure your filament is that thick? Normal filament is around 3mm or "\r
+"1.75mm."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:538\r
+msgid ""\r
+"It is highly unlikely that your machine can achieve a travel speed above "\r
+"300mm/s"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:539\r
+#, python-format\r
+msgid ""\r
+"A bottom layer of more then %.2fmm (3/4 nozzle size) usually give bad "\r
+"results and is not recommended."\r
+msgstr ""\r
~ianmdlvl / cura.git / blobdiff