Add turkish translation.

[cura.git] / resources / locale / zh / LC_MESSAGES / Cura.po

diff --git a/resources/locale/zh/LC_MESSAGES/Cura.po b/resources/locale/zh/LC_MESSAGES/Cura.po
index 1f628a12cf2daa97bd56c1a35a531ceec7cadadd..a8e525e8787359da85d5e0d6555f643a05ce58ef 100644 (file)
--- a/resources/locale/zh/LC_MESSAGES/Cura.po
+++ b/resources/locale/zh/LC_MESSAGES/Cura.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""\r
 "Project-Id-Version: Cura\n"\r
 "Report-Msgid-Bugs-To: \n"\r
-"POT-Creation-Date: 2014-10-22 10:17+0200\n"\r
+"POT-Creation-Date: 2014-12-08 10:01+0100\n"\r
 "PO-Revision-Date: 2014-09-29 16:02+0800\n"\r
 "Last-Translator: \n"\r
 "Language-Team: coloz <clz@clz.me>\n"\r
@@ -18,11 +18,11 @@ msgstr ""
 "Language: zh_Hans_CN\n"\r
 "Plural-Forms: nplurals=1; plural=0;\n"\r
 \r
-#: Cura/gui/app.py:140 Cura/gui/mainWindow.py:610\r
+#: Cura/gui/app.py:141 Cura/gui/mainWindow.py:613\r
 msgid "A new version of Cura is available, would you like to download?"\r
 msgstr ""\r
 \r
-#: Cura/gui/app.py:140 Cura/gui/mainWindow.py:610\r
+#: Cura/gui/app.py:141 Cura/gui/mainWindow.py:613\r
 msgid "New version available"\r
 msgstr ""\r
 \r
@@ -47,23 +47,28 @@ msgstr "向导将协助你，为你的机型配置Cura"
 msgid "Select your language:"\r
 msgstr "设置你的机型"\r
 \r
-#: Cura/gui/configWizard.py:279\r
+#: Cura/gui/configWizard.py:266\r
+#, fuzzy\r
+msgid "Older models"\r
+msgstr "打开3D模型"\r
+\r
+#: Cura/gui/configWizard.py:283\r
 msgid "Printrbot Selection"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:280\r
+#: Cura/gui/configWizard.py:285\r
 msgid "Select which Printrbot machine you have:"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:316\r
+#: Cura/gui/configWizard.py:323\r
 msgid "Other machine information"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:317\r
+#: Cura/gui/configWizard.py:324\r
 msgid "The following pre-defined machine profiles are available"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:318\r
+#: Cura/gui/configWizard.py:325\r
 msgid ""\r
 "Note that these profiles are not guaranteed to give good results,\n"\r
 "or work at all. Extra tweaks might be required.\n"\r
@@ -72,566 +77,566 @@ msgid ""
 "Please report it at the github issue tracker."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:329\r
+#: Cura/gui/configWizard.py:336\r
 msgid "Custom..."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:347\r
+#: Cura/gui/configWizard.py:354\r
 msgid "Cura Ready!"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:348\r
+#: Cura/gui/configWizard.py:355\r
 msgid "Cura is now ready to be used!"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:352\r
+#: Cura/gui/configWizard.py:359\r
 msgid "Custom RepRap information"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:353\r
+#: Cura/gui/configWizard.py:360\r
 msgid ""\r
 "RepRap machines can be vastly different, so here you can set your own "\r
 "settings."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:354\r
+#: Cura/gui/configWizard.py:361\r
 msgid ""\r
 "Be sure to review the default profile before running it on your machine."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:355\r
+#: Cura/gui/configWizard.py:362\r
 msgid ""\r
 "If you like a default profile for your machine added,\n"\r
 "then make an issue on github."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:357\r
+#: Cura/gui/configWizard.py:364\r
 msgid "You will have to manually install Marlin or Sprinter firmware."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:359\r
+#: Cura/gui/configWizard.py:366\r
 msgid "Machine name"\r
 msgstr "机型名称"\r
 \r
-#: Cura/gui/configWizard.py:360\r
+#: Cura/gui/configWizard.py:367\r
 msgid "Machine width (mm)"\r
 msgstr "构建宽度"\r
 \r
-#: Cura/gui/configWizard.py:361\r
+#: Cura/gui/configWizard.py:368\r
 msgid "Machine depth (mm)"\r
 msgstr "构建深度"\r
 \r
-#: Cura/gui/configWizard.py:362\r
+#: Cura/gui/configWizard.py:369\r
 msgid "Machine height (mm)"\r
 msgstr "构建高度"\r
 \r
-#: Cura/gui/configWizard.py:363 Cura/util/profile.py:175\r
+#: Cura/gui/configWizard.py:370 Cura/util/profile.py:183\r
 msgid "Nozzle size (mm)"\r
 msgstr "喷嘴孔径"\r
 \r
-#: Cura/gui/configWizard.py:364 Cura/util/profile.py:503\r
+#: Cura/gui/configWizard.py:371 Cura/util/profile.py:514\r
 msgid "Heated bed"\r
 msgstr "热床"\r
 \r
-#: Cura/gui/configWizard.py:365\r
+#: Cura/gui/configWizard.py:372\r
 msgid "Bed center is 0,0,0 (RoStock)"\r
 msgstr "平台中心为0,0,0"\r
 \r
-#: Cura/gui/configWizard.py:385\r
+#: Cura/gui/configWizard.py:392\r
 msgid "Select your machine"\r
 msgstr "设置你的机型"\r
 \r
-#: Cura/gui/configWizard.py:386\r
+#: Cura/gui/configWizard.py:393\r
 msgid "What kind of machine do you have:"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:401\r
+#: Cura/gui/configWizard.py:408\r
 #, fuzzy\r
 msgid "Other (Ex: RepRap, MakerBot, Witbox)"\r
 msgstr "其他机型（如MostFun Sail）"\r
 \r
-#: Cura/gui/configWizard.py:404\r
+#: Cura/gui/configWizard.py:411\r
 msgid ""\r
 "The collection of anonymous usage information helps with the continued "\r
 "improvement of Cura."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:405\r
+#: Cura/gui/configWizard.py:412\r
 msgid ""\r
 "This does NOT submit your models online nor gathers any privacy related "\r
 "information."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:406\r
+#: Cura/gui/configWizard.py:413\r
 msgid "Submit anonymous usage information:"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:407\r
+#: Cura/gui/configWizard.py:414\r
 msgid "For full details see: http://wiki.ultimaker.com/Cura:stats"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:524\r
+#: Cura/gui/configWizard.py:531\r
 msgid "Select upgraded parts you have"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:525\r
+#: Cura/gui/configWizard.py:532\r
 msgid ""\r
 "To assist you in having better default settings for your Ultimaker\n"\r
 "Cura would like to know which upgrades you have in your machine."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:527\r
+#: Cura/gui/configWizard.py:534\r
 msgid "Extruder drive upgrade"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:528\r
+#: Cura/gui/configWizard.py:535\r
 msgid "Heated printer bed (kit)"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:529\r
+#: Cura/gui/configWizard.py:536\r
 msgid "Heated printer bed (self built)"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:530\r
+#: Cura/gui/configWizard.py:537\r
 msgid "Dual extrusion (experimental)"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:532\r
+#: Cura/gui/configWizard.py:539\r
 msgid ""\r
 "If you have an Ultimaker bought after october 2012 you will have the\n"\r
 "Extruder drive upgrade. If you do not have this upgrade,\n"\r
 "it is highly recommended to improve reliability."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:533\r
+#: Cura/gui/configWizard.py:540\r
 msgid ""\r
 "This upgrade can be bought from the Ultimaker webshop\n"\r
 "or found on thingiverse as thing:26094"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:555\r
+#: Cura/gui/configWizard.py:562\r
 msgid "Upgrade Ultimaker Firmware"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:556\r
+#: Cura/gui/configWizard.py:563\r
 msgid ""\r
 "Firmware is the piece of software running directly on your 3D printer.\n"\r
 "This firmware controls the step motors, regulates the temperature\n"\r
 "and ultimately makes your printer work."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:558\r
+#: Cura/gui/configWizard.py:565\r
 msgid ""\r
 "The firmware shipping with new Ultimakers works, but upgrades\n"\r
 "have been made to make better prints, and make calibration easier."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:560\r
+#: Cura/gui/configWizard.py:567\r
 msgid ""\r
 "Cura requires these new features and thus\n"\r
 "your firmware will most likely need to be upgraded.\n"\r
 "You will get the chance to do so now."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:566\r
+#: Cura/gui/configWizard.py:573\r
 msgid "Do not upgrade to this firmware if:"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:567\r
+#: Cura/gui/configWizard.py:574\r
 msgid "* You have an older machine based on ATMega1280 (Rev 1 machine)"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:568\r
+#: Cura/gui/configWizard.py:575\r
 msgid "* Build your own heated bed"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:569\r
+#: Cura/gui/configWizard.py:576\r
 msgid "* Have other changes in the firmware"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:589\r
+#: Cura/gui/configWizard.py:596\r
 msgid "Ultimaker Checkup"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:603\r
+#: Cura/gui/configWizard.py:610\r
 msgid ""\r
 "It is a good idea to do a few sanity checks now on your Ultimaker.\n"\r
 "You can skip these if you know your machine is functional."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:604\r
+#: Cura/gui/configWizard.py:611\r
 msgid "Run checks"\r
 msgstr "运行检测"\r
 \r
-#: Cura/gui/configWizard.py:604\r
+#: Cura/gui/configWizard.py:611\r
 msgid "Skip checks"\r
 msgstr "跳过检测"\r
 \r
-#: Cura/gui/configWizard.py:608\r
+#: Cura/gui/configWizard.py:615\r
 msgid "Communication:"\r
 msgstr "通信:"\r
 \r
-#: Cura/gui/configWizard.py:609\r
+#: Cura/gui/configWizard.py:616\r
 msgid "Temperature:"\r
 msgstr "温度:"\r
 \r
-#: Cura/gui/configWizard.py:610\r
+#: Cura/gui/configWizard.py:617\r
 msgid "Endstops:"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:615\r
+#: Cura/gui/configWizard.py:622\r
 msgid "Show error log"\r
 msgstr "显示错误日志"\r
 \r
-#: Cura/gui/configWizard.py:649 Cura/gui/configWizard.py:1078\r
-#: Cura/gui/configWizard.py:1297\r
+#: Cura/gui/configWizard.py:656 Cura/gui/configWizard.py:1093\r
+#: Cura/gui/configWizard.py:1312\r
 msgid "Connecting to machine."\r
 msgstr "正在连接打印机"\r
 \r
-#: Cura/gui/configWizard.py:670\r
+#: Cura/gui/configWizard.py:677\r
 msgid "Cooldown before temperature check."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:676 Cura/gui/configWizard.py:683\r
+#: Cura/gui/configWizard.py:683 Cura/gui/configWizard.py:690\r
 msgid "Checking the heater and temperature sensor."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:694\r
+#: Cura/gui/configWizard.py:701\r
 msgid "Please make sure none of the endstops are pressed."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:707\r
+#: Cura/gui/configWizard.py:714\r
 msgid "Temperature measurement FAILED!"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:712\r
+#: Cura/gui/configWizard.py:719\r
 #, python-format\r
 msgid "Head temperature: %d"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:719 Cura/gui/configWizard.py:728\r
+#: Cura/gui/configWizard.py:726 Cura/gui/configWizard.py:735\r
 #, python-format\r
 msgid "Communication State: %s"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:722 Cura/gui/configWizard.py:1255\r
-#: Cura/gui/configWizard.py:1473\r
+#: Cura/gui/configWizard.py:729 Cura/gui/configWizard.py:1270\r
+#: Cura/gui/configWizard.py:1488\r
 msgid "Failed to establish connection with the printer."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:768 Cura/gui/configWizard.py:777\r
+#: Cura/gui/configWizard.py:775 Cura/gui/configWizard.py:784\r
 msgid "Please press the left X endstop."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:772\r
+#: Cura/gui/configWizard.py:779\r
 msgid "Please press the right X endstop."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:782\r
+#: Cura/gui/configWizard.py:789\r
 msgid "Please press the front Y endstop."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:788 Cura/gui/configWizard.py:797\r
+#: Cura/gui/configWizard.py:795 Cura/gui/configWizard.py:804\r
 msgid "Please press the top Z endstop."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:792\r
+#: Cura/gui/configWizard.py:799\r
 msgid "Please press the back Y endstop."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:804 Cura/gui/configWizard.py:817\r
+#: Cura/gui/configWizard.py:811 Cura/gui/configWizard.py:824\r
 msgid "Checkup finished"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:811\r
+#: Cura/gui/configWizard.py:818\r
 msgid "Please press the bottom Z endstop."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:832 Cura/gui/configWizard.py:855\r
+#: Cura/gui/configWizard.py:839 Cura/gui/configWizard.py:862\r
 msgid "Ultimaker Calibration"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:860\r
+#: Cura/gui/configWizard.py:867\r
 msgid "Calibrating the Steps Per E requires some manual actions."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:861\r
+#: Cura/gui/configWizard.py:868\r
 msgid "First remove any filament from your machine."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:862\r
+#: Cura/gui/configWizard.py:869\r
 msgid ""\r
 "Next put in your filament so the tip is aligned with the\n"\r
 "top of the extruder drive."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:863\r
+#: Cura/gui/configWizard.py:870\r
 msgid "We'll push the filament 100mm"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:864\r
+#: Cura/gui/configWizard.py:871\r
 msgid "Extrude 100mm filament"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:865\r
+#: Cura/gui/configWizard.py:872\r
 msgid ""\r
 "Now measure the amount of extruded filament:\n"\r
 "(this can be more or less then 100mm)"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:866\r
+#: Cura/gui/configWizard.py:873\r
 msgid "Save"\r
 msgstr "保存"\r
 \r
-#: Cura/gui/configWizard.py:867\r
+#: Cura/gui/configWizard.py:874\r
 msgid "This results in the following steps per E:"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:869\r
+#: Cura/gui/configWizard.py:876\r
 msgid "You can repeat these steps to get better calibration."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:872\r
+#: Cura/gui/configWizard.py:879\r
 msgid ""\r
 "If you still have filament in your printer which needs\n"\r
 "heat to remove, press the heat up button below:"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:873\r
+#: Cura/gui/configWizard.py:880\r
 msgid "Heatup for filament removal"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:898 Cura/gui/configWizard.py:932\r
+#: Cura/gui/configWizard.py:905 Cura/gui/configWizard.py:939\r
 msgid ""\r
 "Error: Failed to open serial port to machine\n"\r
 "If this keeps happening, try disconnecting and reconnecting the USB cable"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:972\r
+#: Cura/gui/configWizard.py:979\r
 msgid "Ultimaker2"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:973\r
+#: Cura/gui/configWizard.py:980\r
 msgid "Congratulations on your the purchase of your brand new Ultimaker2."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:974\r
+#: Cura/gui/configWizard.py:981\r
 msgid "Cura is now ready to be used with your Ultimaker2."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:979\r
+#: Cura/gui/configWizard.py:986\r
 msgid "Lulzbot TAZ/Mini"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:980\r
+#: Cura/gui/configWizard.py:987\r
 msgid "Cura is now ready to be used with your Lulzbot."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:985\r
+#: Cura/gui/configWizard.py:992\r
 msgid "Configuration Wizard"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:1038 Cura/gui/configWizard.py:1486\r
+#: Cura/gui/configWizard.py:1053 Cura/gui/configWizard.py:1501\r
 #, fuzzy\r
 msgid "Bed leveling wizard"\r
 msgstr "运行平台调平向导..."\r
 \r
-#: Cura/gui/configWizard.py:1040\r
+#: Cura/gui/configWizard.py:1055\r
 #, fuzzy\r
 msgid "This wizard will help you in leveling your printer bed"\r
 msgstr "向导将协助你，为你的机型配置Cura"\r
 \r
-#: Cura/gui/configWizard.py:1042\r
+#: Cura/gui/configWizard.py:1057\r
 msgid "It will do the following steps"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:1043\r
+#: Cura/gui/configWizard.py:1058\r
 msgid "* Move the printer head to each corner"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:1044\r
+#: Cura/gui/configWizard.py:1059\r
 msgid "  and let you adjust the height of the bed to the nozzle"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:1045\r
+#: Cura/gui/configWizard.py:1060\r
 msgid "* Print a line around the bed to check if it is level"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:1048 Cura/gui/configWizard.py:1273\r
+#: Cura/gui/configWizard.py:1063 Cura/gui/configWizard.py:1288\r
 #, fuzzy\r
 msgid "Connect to printer"\r
 msgstr "正在连接打印机"\r
 \r
-#: Cura/gui/configWizard.py:1052 Cura/gui/configWizard.py:1279\r
+#: Cura/gui/configWizard.py:1067 Cura/gui/configWizard.py:1294\r
 #, fuzzy\r
 msgid "Resume"\r
 msgstr "Reset"\r
 \r
-#: Cura/gui/configWizard.py:1053\r
+#: Cura/gui/configWizard.py:1068\r
 msgid "Up 0.2mm"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:1053\r
+#: Cura/gui/configWizard.py:1068\r
 msgid "Down 0.2mm"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:1054\r
+#: Cura/gui/configWizard.py:1069\r
 msgid "Up 10mm"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:1054\r
+#: Cura/gui/configWizard.py:1069\r
 msgid "Down 10mm"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:1114\r
+#: Cura/gui/configWizard.py:1129\r
 msgid "Homing printer..."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:1124\r
+#: Cura/gui/configWizard.py:1139\r
 msgid "Moving head to back center..."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:1131\r
+#: Cura/gui/configWizard.py:1146\r
 msgid "Moving head to back left corner..."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:1139 Cura/gui/configWizard.py:1153\r
+#: Cura/gui/configWizard.py:1154 Cura/gui/configWizard.py:1168\r
 msgid "Moving head to front right corner..."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:1146\r
+#: Cura/gui/configWizard.py:1161\r
 msgid "Moving head to back right corner..."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:1160\r
+#: Cura/gui/configWizard.py:1175\r
 msgid "Heating up printer..."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:1167\r
+#: Cura/gui/configWizard.py:1182\r
 msgid "Printing a square on the printer bed at 0.3mm height."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:1207\r
+#: Cura/gui/configWizard.py:1222\r
 msgid ""\r
 "Adjust the front left screw of your printer bed\n"\r
 "So the nozzle just hits the bed."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:1212\r
+#: Cura/gui/configWizard.py:1227\r
 msgid ""\r
 "Adjust the back screw of your printer bed\n"\r
 "So the nozzle just hits the bed."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:1214\r
+#: Cura/gui/configWizard.py:1229\r
 msgid ""\r
 "Adjust the back left screw of your printer bed\n"\r
 "So the nozzle just hits the bed."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:1218\r
+#: Cura/gui/configWizard.py:1233\r
 msgid ""\r
 "Adjust the back right screw of your printer bed\n"\r
 "So the nozzle just hits the bed."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:1222\r
+#: Cura/gui/configWizard.py:1237\r
 msgid ""\r
 "Adjust the front right screw of your printer bed\n"\r
 "So the nozzle just hits the bed."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:1226\r
+#: Cura/gui/configWizard.py:1241\r
 #, python-format\r
 msgid "Heating up printer: %d/%d"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:1228\r
+#: Cura/gui/configWizard.py:1243\r
 msgid ""\r
 "The printer is hot now. Please insert some PLA filament into the printer."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:1237\r
+#: Cura/gui/configWizard.py:1252\r
 msgid "Use the up/down buttons to move the bed and adjust your Z endstop."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:1249\r
+#: Cura/gui/configWizard.py:1264\r
 msgid ""\r
 "Calibration finished.\n"\r
 "The squares on the bed should slightly touch each other."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:1270\r
+#: Cura/gui/configWizard.py:1285\r
 #, fuzzy\r
 msgid ""\r
 "This wizard will help you in calibrating the printer head offsets of your "\r
 "dual extrusion machine"\r
 msgstr "向导将协助你，为你的机型配置Cura"\r
 \r
-#: Cura/gui/configWizard.py:1303\r
+#: Cura/gui/configWizard.py:1318\r
 msgid "Printing initial calibration cross"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:1351\r
+#: Cura/gui/configWizard.py:1366\r
 msgid ""\r
 "Please measure the distance between the horizontal lines in millimeters."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:1361\r
+#: Cura/gui/configWizard.py:1376\r
 msgid "Printing the fine calibration lines."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:1416\r
+#: Cura/gui/configWizard.py:1431\r
 msgid ""\r
 "Which horizontal line number lays perfect on top of each other? Front most "\r
 "line is zero."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:1427\r
+#: Cura/gui/configWizard.py:1442\r
 #, python-format\r
 msgid "Calibration finished. Offsets are: %s %s"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:1440\r
+#: Cura/gui/configWizard.py:1455\r
 msgid "Please load both extruders with PLA."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:1449\r
+#: Cura/gui/configWizard.py:1464\r
 msgid "Homing printer and heating up both extruders."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:1459\r
+#: Cura/gui/configWizard.py:1474\r
 msgid "Please measure the distance between the vertical lines in millimeters."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:1466\r
+#: Cura/gui/configWizard.py:1481\r
 msgid ""\r
 "Which vertical line number lays perfect on top of each other? Leftmost line "\r
 "is zero."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:1515\r
+#: Cura/gui/configWizard.py:1530\r
 #, fuzzy\r
 msgid "Head offset wizard"\r
 msgstr "运行多喷头校正向导..."\r
 \r
-#: Cura/gui/expertConfig.py:25\r
+#: Cura/gui/expertConfig.py:27\r
 #, fuzzy\r
 msgid "Expert config"\r
 msgstr "专业设置"\r
 \r
-#: Cura/gui/firmwareInstall.py:59\r
+#: Cura/gui/firmwareInstall.py:64\r
 msgid ""\r
 "I am sorry, but Cura does not ship with a default firmware for your machine "\r
 "configuration."\r
 msgstr ""\r
 \r
-#: Cura/gui/firmwareInstall.py:59 Cura/gui/firmwareInstall.py:64\r
-#: Cura/gui/firmwareInstall.py:119 Cura/gui/mainWindow.py:541\r
+#: Cura/gui/firmwareInstall.py:64 Cura/gui/firmwareInstall.py:69\r
+#: Cura/gui/firmwareInstall.py:124 Cura/gui/mainWindow.py:543\r
 msgid "Firmware update"\r
 msgstr "固件更新"\r
 \r
-#: Cura/gui/firmwareInstall.py:64\r
+#: Cura/gui/firmwareInstall.py:69\r
 msgid ""\r
 "Cura only supports firmware updates for ATMega2560 based hardware.\n"\r
 "So updating your RepRap with Cura might or might not work."\r
@@ -639,49 +644,49 @@ msgstr ""
 "Cura仅支持基于ATmega2560的机型升级\n"\r
 "升级固件后也许大概有可能你的打印机无法正常工作"\r
 \r
-#: Cura/gui/firmwareInstall.py:72 Cura/gui/firmwareInstall.py:175\r
+#: Cura/gui/firmwareInstall.py:77 Cura/gui/firmwareInstall.py:181\r
 msgid "OK"\r
 msgstr "确定"\r
 \r
-#: Cura/gui/firmwareInstall.py:93 Cura/gui/firmwareInstall.py:206\r
+#: Cura/gui/firmwareInstall.py:98 Cura/gui/firmwareInstall.py:265\r
 msgid "Reading firmware..."\r
 msgstr "读取固件..."\r
 \r
-#: Cura/gui/firmwareInstall.py:95 Cura/gui/firmwareInstall.py:208\r
+#: Cura/gui/firmwareInstall.py:100 Cura/gui/firmwareInstall.py:267\r
 msgid "Connecting to machine..."\r
 msgstr "连接到打印机..."\r
 \r
-#: Cura/gui/firmwareInstall.py:99 Cura/gui/firmwareInstall.py:212\r
+#: Cura/gui/firmwareInstall.py:104 Cura/gui/firmwareInstall.py:271\r
 msgid ""\r
 "Please connect the printer to\n"\r
 "your computer with the USB cable."\r
 msgstr ""\r
 \r
-#: Cura/gui/firmwareInstall.py:118\r
+#: Cura/gui/firmwareInstall.py:123\r
 msgid ""\r
 "Failed to find machine for firmware upgrade\n"\r
 "Is your machine connected to the PC?"\r
 msgstr ""\r
 \r
-#: Cura/gui/firmwareInstall.py:125\r
+#: Cura/gui/firmwareInstall.py:130\r
 msgid ""\r
 "Failed to install firmware:\n"\r
 "This firmware is not compatible with this machine.\n"\r
 "Trying to install UMO firmware on an UM2 or UMO+?"\r
 msgstr ""\r
 \r
-#: Cura/gui/firmwareInstall.py:131\r
+#: Cura/gui/firmwareInstall.py:136\r
 msgid ""\r
 "Failed to install firmware:\n"\r
 "This firmware is not compatible with this machine.\n"\r
 "Trying to install UM2 or UMO+ firmware on an UMO?"\r
 msgstr ""\r
 \r
-#: Cura/gui/firmwareInstall.py:136 Cura/gui/firmwareInstall.py:234\r
+#: Cura/gui/firmwareInstall.py:141 Cura/gui/firmwareInstall.py:293\r
 msgid "Uploading firmware..."\r
 msgstr "固件上传中"\r
 \r
-#: Cura/gui/firmwareInstall.py:139 Cura/gui/firmwareInstall.py:237\r
+#: Cura/gui/firmwareInstall.py:144 Cura/gui/firmwareInstall.py:296\r
 #, python-format\r
 msgid ""\r
 "Done!\n"\r
@@ -690,245 +695,246 @@ msgstr ""
 "完成!\n"\r
 "成功写入固件: %s"\r
 \r
-#: Cura/gui/firmwareInstall.py:141 Cura/gui/firmwareInstall.py:239\r
+#: Cura/gui/firmwareInstall.py:146 Cura/gui/firmwareInstall.py:298\r
 msgid "Failed to write firmware.\n"\r
 msgstr "固件写入失败\n"\r
 \r
-#: Cura/gui/firmwareInstall.py:231\r
+#: Cura/gui/firmwareInstall.py:290\r
 msgid "Failed to connect to programmer.\n"\r
 msgstr ""\r
 \r
-#: Cura/gui/mainWindow.py:68\r
+#: Cura/gui/mainWindow.py:72\r
 msgid "Load model file...\tCTRL+L"\r
 msgstr "读取模型文件...\tCTRL+L"\r
 \r
-#: Cura/gui/mainWindow.py:70\r
+#: Cura/gui/mainWindow.py:74\r
 msgid "Save model...\tCTRL+S"\r
 msgstr "保存模型...\tCTRL+S"\r
 \r
-#: Cura/gui/mainWindow.py:72\r
+#: Cura/gui/mainWindow.py:76\r
 msgid "Reload platform\tF5"\r
 msgstr "重新载入模型\tF5"\r
 \r
-#: Cura/gui/mainWindow.py:74\r
+#: Cura/gui/mainWindow.py:78\r
 msgid "Clear platform"\r
 msgstr "清除所有模型"\r
 \r
-#: Cura/gui/mainWindow.py:78\r
+#: Cura/gui/mainWindow.py:82\r
 msgid "Print...\tCTRL+P"\r
 msgstr "打印...\tCTRL+P"\r
 \r
-#: Cura/gui/mainWindow.py:80 Cura/gui/sceneView.py:279\r
+#: Cura/gui/mainWindow.py:84 Cura/gui/sceneView.py:279\r
 msgid "Save GCode..."\r
 msgstr "保存GCode..."\r
 \r
-#: Cura/gui/mainWindow.py:82\r
+#: Cura/gui/mainWindow.py:86\r
 msgid "Show slice engine log..."\r
 msgstr "显示切片引擎记录..."\r
 \r
-#: Cura/gui/mainWindow.py:86\r
+#: Cura/gui/mainWindow.py:90\r
 msgid "Open Profile..."\r
 msgstr "打开配置文件..."\r
 \r
-#: Cura/gui/mainWindow.py:89\r
+#: Cura/gui/mainWindow.py:93\r
 msgid "Save Profile..."\r
 msgstr "保存配置文件..."\r
 \r
-#: Cura/gui/mainWindow.py:92\r
+#: Cura/gui/mainWindow.py:96\r
 msgid "Load Profile from GCode..."\r
 msgstr "从Gcode中读取配置文件..."\r
 \r
-#: Cura/gui/mainWindow.py:96\r
+#: Cura/gui/mainWindow.py:100\r
 msgid "Reset Profile to default"\r
 msgstr "恢复默认配置..."\r
 \r
-#: Cura/gui/mainWindow.py:101\r
+#: Cura/gui/mainWindow.py:105\r
 msgid "Preferences...\tCTRL+,"\r
 msgstr "偏好配置......\tCTRL+,"\r
 \r
-#: Cura/gui/mainWindow.py:103 Cura/gui/mainWindow.py:467\r
+#: Cura/gui/mainWindow.py:107 Cura/gui/mainWindow.py:469\r
 msgid "Machine settings..."\r
 msgstr "机型设置..."\r
 \r
-#: Cura/gui/mainWindow.py:109\r
+#: Cura/gui/mainWindow.py:113\r
 msgid "Recent Model Files"\r
 msgstr "最近使用的模型文件"\r
 \r
-#: Cura/gui/mainWindow.py:116\r
+#: Cura/gui/mainWindow.py:120\r
 msgid "Recent Profile Files"\r
 msgstr "最近使用的配置文件"\r
 \r
-#: Cura/gui/mainWindow.py:122\r
+#: Cura/gui/mainWindow.py:126\r
 msgid "Quit"\r
 msgstr "退出"\r
 \r
-#: Cura/gui/mainWindow.py:124\r
+#: Cura/gui/mainWindow.py:128\r
 msgid "File"\r
 msgstr "文件"\r
 \r
-#: Cura/gui/mainWindow.py:132\r
+#: Cura/gui/mainWindow.py:136\r
 msgid "Minecraft map import..."\r
 msgstr "导入Minecraft地图..."\r
 \r
-#: Cura/gui/mainWindow.py:136\r
+#: Cura/gui/mainWindow.py:140\r
 msgid "PID Debugger..."\r
 msgstr "PID调试器..."\r
 \r
-#: Cura/gui/mainWindow.py:138\r
+#: Cura/gui/mainWindow.py:142\r
 #, fuzzy\r
 msgid "Auto Firmware Update..."\r
 msgstr "固件更新"\r
 \r
-#: Cura/gui/mainWindow.py:141\r
+#: Cura/gui/mainWindow.py:145\r
 msgid "Copy profile to clipboard"\r
 msgstr "复制配置到剪切板"\r
 \r
-#: Cura/gui/mainWindow.py:145\r
+#: Cura/gui/mainWindow.py:149\r
 msgid "Print all at once"\r
 msgstr "同时打印多个模型"\r
 \r
-#: Cura/gui/mainWindow.py:147\r
+#: Cura/gui/mainWindow.py:151\r
 msgid "Print one at a time"\r
 msgstr "逐个打印模型"\r
 \r
-#: Cura/gui/mainWindow.py:154\r
+#: Cura/gui/mainWindow.py:158\r
 msgid "Tools"\r
 msgstr "工具"\r
 \r
-#: Cura/gui/mainWindow.py:160 Cura/util/profile.py:175\r
+#: Cura/gui/mainWindow.py:164 Cura/util/profile.py:183\r
 msgid "Machine"\r
 msgstr "机型"\r
 \r
-#: Cura/gui/mainWindow.py:163\r
+#: Cura/gui/mainWindow.py:167\r
 msgid "Switch to quickprint..."\r
 msgstr "切换到快速打印模式..."\r
 \r
-#: Cura/gui/mainWindow.py:167\r
+#: Cura/gui/mainWindow.py:171\r
 msgid "Switch to full settings..."\r
 msgstr "切换到完整配置模式..."\r
 \r
-#: Cura/gui/mainWindow.py:172\r
+#: Cura/gui/mainWindow.py:176\r
 msgid "Open expert settings...\tCTRL+E"\r
 msgstr "额外设置...\tCTRL+E"\r
 \r
-#: Cura/gui/mainWindow.py:176\r
-msgid "Run first run wizard..."\r
-msgstr "运行首次使用向导..."\r
-\r
-#: Cura/gui/mainWindow.py:178\r
+#: Cura/gui/mainWindow.py:180\r
 msgid "Run bed leveling wizard..."\r
 msgstr "运行平台调平向导..."\r
 \r
-#: Cura/gui/mainWindow.py:180\r
+#: Cura/gui/mainWindow.py:182\r
 msgid "Run head offset wizard..."\r
 msgstr "运行多喷头校正向导..."\r
 \r
-#: Cura/gui/mainWindow.py:183\r
+#: Cura/gui/mainWindow.py:185\r
 msgid "Expert"\r
 msgstr "专业设置"\r
 \r
-#: Cura/gui/mainWindow.py:186\r
+#: Cura/gui/mainWindow.py:188\r
 msgid "Online documentation..."\r
 msgstr "在线文档..."\r
 \r
-#: Cura/gui/mainWindow.py:188\r
+#: Cura/gui/mainWindow.py:190\r
 msgid "Report a problem..."\r
 msgstr "问题提交..."\r
 \r
-#: Cura/gui/mainWindow.py:190\r
+#: Cura/gui/mainWindow.py:192\r
 msgid "Check for update..."\r
 msgstr "检查更新..."\r
 \r
-#: Cura/gui/mainWindow.py:192\r
+#: Cura/gui/mainWindow.py:194\r
 msgid "Open YouMagine website..."\r
 msgstr "打开YouMagine网站..."\r
 \r
-#: Cura/gui/mainWindow.py:194\r
+#: Cura/gui/mainWindow.py:196\r
 msgid "About Cura..."\r
 msgstr "关于Cura"\r
 \r
-#: Cura/gui/mainWindow.py:196\r
+#: Cura/gui/mainWindow.py:198\r
 msgid "Help"\r
 msgstr "帮助"\r
 \r
-#: Cura/gui/mainWindow.py:376\r
+#: Cura/gui/mainWindow.py:379\r
 msgid ""\r
 "For \"One at a time\" printing, you need to have entered the correct head "\r
 "size and gantry height in the machine settings"\r
 msgstr ""\r
 \r
-#: Cura/gui/mainWindow.py:376\r
+#: Cura/gui/mainWindow.py:379\r
 msgid "One at a time warning"\r
 msgstr ""\r
 \r
-#: Cura/gui/mainWindow.py:473\r
+#: Cura/gui/mainWindow.py:467\r
+#, fuzzy\r
+msgid "Add new machine..."\r
+msgstr "添加机型"\r
+\r
+#: Cura/gui/mainWindow.py:475\r
 msgid "Install default firmware..."\r
 msgstr "安装默认固件..."\r
 \r
-#: Cura/gui/mainWindow.py:476\r
+#: Cura/gui/mainWindow.py:478\r
 msgid "Install custom firmware..."\r
 msgstr "安装自定义固件"\r
 \r
-#: Cura/gui/mainWindow.py:480\r
+#: Cura/gui/mainWindow.py:482\r
 msgid "Select profile file to load"\r
 msgstr ""\r
 \r
-#: Cura/gui/mainWindow.py:492\r
+#: Cura/gui/mainWindow.py:494\r
 msgid "Select gcode file to load profile from"\r
 msgstr ""\r
 \r
-#: Cura/gui/mainWindow.py:507\r
+#: Cura/gui/mainWindow.py:509\r
 msgid ""\r
 "No profile found in GCode file.\n"\r
 "This feature only works with GCode files made by Cura 12.07 or newer."\r
 msgstr ""\r
 \r
-#: Cura/gui/mainWindow.py:507\r
+#: Cura/gui/mainWindow.py:509\r
 msgid "Profile load error"\r
 msgstr ""\r
 \r
-#: Cura/gui/mainWindow.py:511\r
+#: Cura/gui/mainWindow.py:513\r
 msgid "Select profile file to save"\r
 msgstr ""\r
 \r
-#: Cura/gui/mainWindow.py:521\r
+#: Cura/gui/mainWindow.py:523\r
 msgid ""\r
 "This will reset all profile settings to defaults.\n"\r
 "Unless you have saved your current profile, all settings will be lost!\n"\r
 "Do you really want to reset?"\r
 msgstr ""\r
 \r
-#: Cura/gui/mainWindow.py:521\r
+#: Cura/gui/mainWindow.py:523\r
 msgid "Profile reset"\r
 msgstr ""\r
 \r
-#: Cura/gui/mainWindow.py:541\r
+#: Cura/gui/mainWindow.py:543\r
 msgid ""\r
 "Warning: Installing a custom firmware does not guarantee that you machine "\r
 "will function correctly, and could damage your machine."\r
 msgstr ""\r
 \r
-#: Cura/gui/mainWindow.py:542 Cura/gui/mainWindow.py:584\r
+#: Cura/gui/mainWindow.py:544 Cura/gui/mainWindow.py:587\r
 msgid "Open firmware to upload"\r
 msgstr ""\r
 \r
-#: Cura/gui/mainWindow.py:613\r
+#: Cura/gui/mainWindow.py:616\r
 msgid "You are running the latest version of Cura!"\r
 msgstr "你正在运行最新版本的的Cura!"\r
 \r
-#: Cura/gui/mainWindow.py:613\r
+#: Cura/gui/mainWindow.py:616\r
 msgid "Awesome!"\r
 msgstr ""\r
 \r
-#: Cura/gui/mainWindow.py:658\r
+#: Cura/gui/mainWindow.py:661\r
 msgid "Basic"\r
 msgstr ""\r
 \r
-#: Cura/gui/mainWindow.py:662\r
+#: Cura/gui/mainWindow.py:665\r
 msgid "Advanced"\r
 msgstr ""\r
 \r
-#: Cura/gui/mainWindow.py:668\r
+#: Cura/gui/mainWindow.py:671\r
 msgid "Plugins"\r
 msgstr "插件"\r
 \r
@@ -965,7 +971,7 @@ msgstr "打印窗口"
 msgid "Colours"\r
 msgstr "颜色"\r
 \r
-#: Cura/gui/preferencesDialog.py:37 Cura/util/profile.py:478\r
+#: Cura/gui/preferencesDialog.py:37 Cura/util/profile.py:489\r
 msgid "Language"\r
 msgstr "语言"\r
 \r
@@ -1008,19 +1014,19 @@ msgstr "添加机型"
 msgid "Remove machine"\r
 msgstr "设置你的机型"\r
 \r
-#: Cura/gui/preferencesDialog.py:131 Cura/gui/preferencesDialog.py:168\r
+#: Cura/gui/preferencesDialog.py:131 Cura/gui/preferencesDialog.py:167\r
 msgid "Change machine name"\r
 msgstr "更改机型名称"\r
 \r
-#: Cura/gui/preferencesDialog.py:154\r
+#: Cura/gui/preferencesDialog.py:153\r
 msgid "Cannot remove the last machine configuration in Cura"\r
 msgstr ""\r
 \r
-#: Cura/gui/preferencesDialog.py:154\r
+#: Cura/gui/preferencesDialog.py:153\r
 msgid "Machine remove error"\r
 msgstr "机型移除错误"\r
 \r
-#: Cura/gui/preferencesDialog.py:168\r
+#: Cura/gui/preferencesDialog.py:167\r
 msgid "Enter the new name:"\r
 msgstr "输入新的名称:"\r
 \r
@@ -1481,17 +1487,17 @@ msgstr ""
 msgid "3D window error"\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:170 Cura/util/profile.py:171 Cura/util/profile.py:172\r
-#: Cura/util/profile.py:200 Cura/util/profile.py:201 Cura/util/profile.py:202\r
-#: Cura/util/profile.py:204\r
+#: Cura/util/profile.py:178 Cura/util/profile.py:179 Cura/util/profile.py:180\r
+#: Cura/util/profile.py:208 Cura/util/profile.py:209 Cura/util/profile.py:210\r
+#: Cura/util/profile.py:212\r
 msgid "Quality"\r
 msgstr "打印质量"\r
 \r
-#: Cura/util/profile.py:170\r
+#: Cura/util/profile.py:178\r
 msgid "Layer height (mm)"\r
 msgstr "层厚(mm)"\r
 \r
-#: Cura/util/profile.py:170\r
+#: Cura/util/profile.py:178\r
 msgid ""\r
 "Layer height in millimeters.\n"\r
 "This is the most important setting to determine the quality of your print. "\r
@@ -1503,11 +1509,11 @@ msgstr ""
 "普通质量可设置为0.2mm，高质量设为0.1mm。\n"\r
 "降低打印质量可以提升打印速度"\r
 \r
-#: Cura/util/profile.py:171\r
+#: Cura/util/profile.py:179\r
 msgid "Shell thickness (mm)"\r
 msgstr "壁厚(mm)"\r
 \r
-#: Cura/util/profile.py:171\r
+#: Cura/util/profile.py:179\r
 msgid ""\r
 "Thickness of the outside shell in the horizontal direction.\n"\r
 "This is used in combination with the nozzle size to define the number\n"\r
@@ -1516,11 +1522,11 @@ msgstr ""
 "水平方向的边缘厚度\n"\r
 "通常需要结合你的喷嘴孔径设置成相应倍数，这个参数决定了边缘的走线次数和厚度"\r
 \r
-#: Cura/util/profile.py:172\r
+#: Cura/util/profile.py:180\r
 msgid "Enable retraction"\r
 msgstr "开启回退"\r
 \r
-#: Cura/util/profile.py:172\r
+#: Cura/util/profile.py:180\r
 msgid ""\r
 "Retract the filament when the nozzle is moving over a none-printed area. "\r
 "Details about the retraction can be configured in the advanced tab."\r
@@ -1528,15 +1534,15 @@ msgstr ""
 "当在非打印区域移动喷头时，适当的回退丝能避免多余的挤出和拉丝\n"\r
 "在高级设置面板中有更多相关设置"\r
 \r
-#: Cura/util/profile.py:173 Cura/util/profile.py:174\r
+#: Cura/util/profile.py:181 Cura/util/profile.py:182\r
 msgid "Fill"\r
 msgstr "填充"\r
 \r
-#: Cura/util/profile.py:173\r
+#: Cura/util/profile.py:181\r
 msgid "Bottom/Top thickness (mm)"\r
 msgstr "底层/顶层厚度(mm)"\r
 \r
-#: Cura/util/profile.py:173\r
+#: Cura/util/profile.py:181\r
 msgid ""\r
 "This controls the thickness of the bottom and top layers, the amount of "\r
 "solid layers put down is calculated by the layer thickness and this value.\n"\r
@@ -1546,11 +1552,11 @@ msgstr ""
 "这个参数控制底层和顶层的厚度，通过层厚和这个参数计算需打印出的实心层的数量\n"\r
 "这个数值应是层厚的倍数。让这个参数接近你的壁厚，可以让模型强度更均匀"\r
 \r
-#: Cura/util/profile.py:174\r
+#: Cura/util/profile.py:182\r
 msgid "Fill Density (%)"\r
 msgstr "填充密度(%)"\r
 \r
-#: Cura/util/profile.py:174\r
+#: Cura/util/profile.py:182\r
 msgid ""\r
 "This controls how densely filled the insides of your print will be. For a "\r
 "solid part use 100%, for an empty part use 0%. A value around 20% is usually "\r
@@ -1562,23 +1568,23 @@ msgstr ""
 "打印实心物体需设置为100%，空心物体设置为0%。通常使用20%填充率\n"\r
 "这个参数不会影响物体的外观，它一般用来调整物体的强度"\r
 \r
-#: Cura/util/profile.py:175\r
+#: Cura/util/profile.py:183\r
 msgid ""\r
 "The nozzle size is very important, this is used to calculate the line width "\r
 "of the infill, and used to calculate the amount of outside wall lines and "\r
 "thickness for the wall thickness you entered in the print settings."\r
 msgstr "喷嘴尺寸是相当重要的,它会被用于计算走线宽度、外壁走线次数和厚度"\r
 \r
-#: Cura/util/profile.py:176 Cura/util/profile.py:177 Cura/util/profile.py:178\r
-#: Cura/util/profile.py:179 Cura/util/profile.py:180 Cura/util/profile.py:181\r
+#: Cura/util/profile.py:184 Cura/util/profile.py:185 Cura/util/profile.py:186\r
+#: Cura/util/profile.py:187 Cura/util/profile.py:188 Cura/util/profile.py:189\r
 msgid "Speed and Temperature"\r
 msgstr "速度和温度"\r
 \r
-#: Cura/util/profile.py:176\r
+#: Cura/util/profile.py:184\r
 msgid "Print speed (mm/s)"\r
 msgstr "打印速度(mm/s)"\r
 \r
-#: Cura/util/profile.py:176\r
+#: Cura/util/profile.py:184\r
 msgid ""\r
 "Speed at which printing happens. A well adjusted Ultimaker can reach 150mm/"\r
 "s, but for good quality prints you want to print slower. Printing speed "\r
@@ -1590,12 +1596,12 @@ msgstr ""
 "80mm/s以下\n"\r
 "打印速度的设置要参考很多因素，你可以根据实际情况调试修改"\r
 \r
-#: Cura/util/profile.py:177\r
+#: Cura/util/profile.py:185\r
 msgid "Printing temperature (C)"\r
 msgstr "打印温度(C)"\r
 \r
-#: Cura/util/profile.py:177 Cura/util/profile.py:178 Cura/util/profile.py:179\r
-#: Cura/util/profile.py:180\r
+#: Cura/util/profile.py:185 Cura/util/profile.py:186 Cura/util/profile.py:187\r
+#: Cura/util/profile.py:188\r
 msgid ""\r
 "Temperature used for printing. Set at 0 to pre-heat yourself.\n"\r
 "For PLA a value of 210C is usually used.\n"\r
@@ -1605,50 +1611,50 @@ msgstr ""
 "PLA通常设置为210C\n"\r
 "ABS通常设置为230C"\r
 \r
-#: Cura/util/profile.py:178\r
+#: Cura/util/profile.py:186\r
 msgid "2nd nozzle temperature (C)"\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:179\r
+#: Cura/util/profile.py:187\r
 msgid "3th nozzle temperature (C)"\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:180\r
+#: Cura/util/profile.py:188\r
 msgid "4th nozzle temperature (C)"\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:181\r
+#: Cura/util/profile.py:189\r
 msgid "Bed temperature (C)"\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:181\r
+#: Cura/util/profile.py:189\r
 msgid ""\r
 "Temperature used for the heated printer bed. Set at 0 to pre-heat yourself."\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:182 Cura/util/profile.py:183\r
+#: Cura/util/profile.py:190 Cura/util/profile.py:191\r
 msgid "None"\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:182\r
+#: Cura/util/profile.py:190\r
 msgid "Touching buildplate"\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:182\r
+#: Cura/util/profile.py:190\r
 msgid "Everywhere"\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:182 Cura/util/profile.py:183 Cura/util/profile.py:184\r
-#: Cura/util/profile.py:224 Cura/util/profile.py:225 Cura/util/profile.py:226\r
-#: Cura/util/profile.py:227 Cura/util/profile.py:228\r
+#: Cura/util/profile.py:190 Cura/util/profile.py:191 Cura/util/profile.py:192\r
+#: Cura/util/profile.py:232 Cura/util/profile.py:233 Cura/util/profile.py:234\r
+#: Cura/util/profile.py:235 Cura/util/profile.py:236\r
 msgid "Support"\r
 msgstr "支撑"\r
 \r
-#: Cura/util/profile.py:182\r
+#: Cura/util/profile.py:190\r
 msgid "Support type"\r
 msgstr "支撑类型"\r
 \r
-#: Cura/util/profile.py:182\r
+#: Cura/util/profile.py:190\r
 msgid ""\r
 "Type of support structure build.\n"\r
 "\"Touching buildplate\" is the most commonly used support setting.\n"\r
@@ -1664,21 +1670,22 @@ msgstr ""
 "选择Touching buildplate 仅会生成接触到打印平台的支撑结构\n"\r
 "选择 Everywhere 会在模型上所有的悬空位置创建支撑结构"\r
 \r
-#: Cura/util/profile.py:183 Cura/util/profile.py:232\r
+#: Cura/util/profile.py:191 Cura/util/profile.py:240\r
 msgid "Brim"\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:183 Cura/util/profile.py:233 Cura/util/profile.py:234\r
-#: Cura/util/profile.py:235 Cura/util/profile.py:236 Cura/util/profile.py:237\r
-#: Cura/util/profile.py:238 Cura/util/profile.py:239 Cura/util/profile.py:240\r
+#: Cura/util/profile.py:191 Cura/util/profile.py:241 Cura/util/profile.py:242\r
+#: Cura/util/profile.py:243 Cura/util/profile.py:244 Cura/util/profile.py:245\r
+#: Cura/util/profile.py:246 Cura/util/profile.py:247 Cura/util/profile.py:248\r
+#: Cura/util/profile.py:249 Cura/util/profile.py:250 Cura/util/profile.py:251\r
 msgid "Raft"\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:183\r
+#: Cura/util/profile.py:191\r
 msgid "Platform adhesion type"\r
 msgstr "粘附平台"\r
 \r
-#: Cura/util/profile.py:183\r
+#: Cura/util/profile.py:191\r
 msgid ""\r
 "Different options that help in preventing corners from lifting due to "\r
 "warping.\n"\r
@@ -1693,23 +1700,23 @@ msgstr ""
 "Raft会打印模型前打印一个网状底座\n"\r
 "（注意：开启粘附平台后,会关闭打印开始前的边缘走线功能）"\r
 \r
-#: Cura/util/profile.py:184\r
+#: Cura/util/profile.py:192\r
 msgid "Both"\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:184\r
+#: Cura/util/profile.py:192\r
 msgid "First extruder"\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:184\r
+#: Cura/util/profile.py:192\r
 msgid "Second extruder"\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:184\r
+#: Cura/util/profile.py:192\r
 msgid "Support dual extrusion"\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:184\r
+#: Cura/util/profile.py:192\r
 msgid ""\r
 "Which extruder to use for support material, for break-away support you can "\r
 "use both extruders.\n"\r
@@ -1719,15 +1726,15 @@ msgid ""
 "You can also use the 2nd extruder for soluble support materials."\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:185 Cura/util/profile.py:186 Cura/util/profile.py:187\r
+#: Cura/util/profile.py:193 Cura/util/profile.py:194 Cura/util/profile.py:195\r
 msgid "Dual extrusion"\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:185\r
+#: Cura/util/profile.py:193\r
 msgid "Wipe&prime tower"\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:185\r
+#: Cura/util/profile.py:193\r
 msgid ""\r
 "The wipe-tower is a tower printed on every layer when switching between "\r
 "nozzles.\n"\r
@@ -1735,11 +1742,11 @@ msgid ""
 "print the 2nd color."\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:186\r
+#: Cura/util/profile.py:194\r
 msgid "Wipe&prime tower volume per layer (mm3)"\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:186\r
+#: Cura/util/profile.py:194\r
 msgid ""\r
 "The amount of material put in the wipe/prime tower.\n"\r
 "This is done in volume because in general you want to extrude a\n"\r
@@ -1748,27 +1755,27 @@ msgid ""
 "This means that with thinner layers, your tower gets bigger."\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:187\r
+#: Cura/util/profile.py:195\r
 msgid "Ooze shield"\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:187\r
+#: Cura/util/profile.py:195\r
 msgid ""\r
 "The ooze shield is a 1 line thick shell around the object which stands a few "\r
 "mm from the object.\n"\r
 "This shield catches any oozing from the unused nozzle in dual-extrusion."\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:188 Cura/util/profile.py:189 Cura/util/profile.py:190\r
-#: Cura/util/profile.py:191 Cura/util/profile.py:192\r
+#: Cura/util/profile.py:196 Cura/util/profile.py:197 Cura/util/profile.py:198\r
+#: Cura/util/profile.py:199 Cura/util/profile.py:200\r
 msgid "Filament"\r
 msgstr "打印材料"\r
 \r
-#: Cura/util/profile.py:188\r
+#: Cura/util/profile.py:196\r
 msgid "Diameter (mm)"\r
 msgstr "直径(mm)"\r
 \r
-#: Cura/util/profile.py:188\r
+#: Cura/util/profile.py:196\r
 msgid ""\r
 "Diameter of your filament, as accurately as possible.\n"\r
 "If you cannot measure this value you will have to calibrate it, a higher "\r
@@ -1777,57 +1784,57 @@ msgstr ""
 "打印耗材的直径\n"\r
 "MostFun Sail使用的耗材的直径为1.75mm"\r
 \r
-#: Cura/util/profile.py:189\r
+#: Cura/util/profile.py:197\r
 msgid "Diameter2 (mm)"\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:189\r
+#: Cura/util/profile.py:197\r
 msgid ""\r
 "Diameter of your filament for the 2nd nozzle. Use 0 to use the same diameter "\r
 "as for nozzle 1."\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:190\r
+#: Cura/util/profile.py:198\r
 msgid "Diameter3 (mm)"\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:190\r
+#: Cura/util/profile.py:198\r
 msgid ""\r
 "Diameter of your filament for the 3th nozzle. Use 0 to use the same diameter "\r
 "as for nozzle 1."\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:191\r
+#: Cura/util/profile.py:199\r
 msgid "Diameter4 (mm)"\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:191\r
+#: Cura/util/profile.py:199\r
 msgid ""\r
 "Diameter of your filament for the 4th nozzle. Use 0 to use the same diameter "\r
 "as for nozzle 1."\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:192\r
+#: Cura/util/profile.py:200\r
 msgid "Flow (%)"\r
 msgstr "流量(%)"\r
 \r
-#: Cura/util/profile.py:192\r
+#: Cura/util/profile.py:200\r
 msgid ""\r
 "Flow compensation, the amount of material extruded is multiplied by this "\r
 "value"\r
 msgstr "流量补偿，最终挤出量是设定的挤出量乘以这个值"\r
 \r
-#: Cura/util/profile.py:193 Cura/util/profile.py:194 Cura/util/profile.py:195\r
-#: Cura/util/profile.py:196 Cura/util/profile.py:197 Cura/util/profile.py:198\r
-#: Cura/util/profile.py:199\r
+#: Cura/util/profile.py:201 Cura/util/profile.py:202 Cura/util/profile.py:203\r
+#: Cura/util/profile.py:204 Cura/util/profile.py:205 Cura/util/profile.py:206\r
+#: Cura/util/profile.py:207\r
 msgid "Retraction"\r
 msgstr "回退"\r
 \r
-#: Cura/util/profile.py:193\r
+#: Cura/util/profile.py:201\r
 msgid "Speed (mm/s)"\r
 msgstr "回退速度(mm/s)"\r
 \r
-#: Cura/util/profile.py:193\r
+#: Cura/util/profile.py:201\r
 msgid ""\r
 "Speed at which the filament is retracted, a higher retraction speed works "\r
 "better. But a very high retraction speed can lead to filament grinding."\r
@@ -1835,11 +1842,11 @@ msgstr ""
 "回退丝时的速度\n"\r
 "设定较高的速度能达到较好的效果。但是过高的速度可能会导致丝的磨损"\r
 \r
-#: Cura/util/profile.py:194\r
+#: Cura/util/profile.py:202\r
 msgid "Distance (mm)"\r
 msgstr "回退长度(mm)"\r
 \r
-#: Cura/util/profile.py:194\r
+#: Cura/util/profile.py:202\r
 msgid ""\r
 "Amount of retraction, set at 0 for no retraction at all. A value of 4.5mm "\r
 "seems to generate good results."\r
@@ -1847,31 +1854,31 @@ msgstr ""
 "丝回退的长度\n"\r
 "设置为0时不会回退，在MostFun Sail设置为3mm时效果比较好"\r
 \r
-#: Cura/util/profile.py:195\r
+#: Cura/util/profile.py:203\r
 msgid "Dual extrusion switch amount (mm)"\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:195\r
+#: Cura/util/profile.py:203\r
 msgid ""\r
 "Amount of retraction when switching nozzle with dual-extrusion, set at 0 for "\r
 "no retraction at all. A value of 16.0mm seems to generate good results."\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:196\r
+#: Cura/util/profile.py:204\r
 msgid "Minimum travel (mm)"\r
 msgstr "最小移动距离(mm)"\r
 \r
-#: Cura/util/profile.py:196\r
+#: Cura/util/profile.py:204\r
 msgid ""\r
 "Minimum amount of travel needed for a retraction to happen at all. To make "\r
 "sure you do not get a lot of retractions in a small area."\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:197\r
+#: Cura/util/profile.py:205\r
 msgid "Enable combing"\r
 msgstr "开启梳理"\r
 \r
-#: Cura/util/profile.py:197\r
+#: Cura/util/profile.py:205\r
 msgid ""\r
 "Combing is the act of avoiding holes in the print for the head to travel "\r
 "over. If combing is disabled the printer head moves straight from the start "\r
@@ -1880,11 +1887,11 @@ msgstr ""
 "梳理功能可以避免喷头移动后产生的孔\n"\r
 "如果关闭了该功能，打印头会在移动过程中一直处在回退状态"\r
 \r
-#: Cura/util/profile.py:198\r
+#: Cura/util/profile.py:206\r
 msgid "Minimal extrusion before retracting (mm)"\r
 msgstr "回退前最小挤出量(mm)"\r
 \r
-#: Cura/util/profile.py:198\r
+#: Cura/util/profile.py:206\r
 msgid ""\r
 "The minimal amount of extrusion that needs to be done before retracting "\r
 "again if a retraction needs to happen before this minimal is reached the "\r
@@ -1893,22 +1900,22 @@ msgid ""
 "the filament and causes grinding issues."\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:199\r
+#: Cura/util/profile.py:207\r
 msgid "Z hop when retracting (mm)"\r
 msgstr "回退时Z轴抬起(mm)"\r
 \r
-#: Cura/util/profile.py:199\r
+#: Cura/util/profile.py:207\r
 msgid ""\r
 "When a retraction is done, the head is lifted by this amount to travel over "\r
 "the print. A value of 0.075 works well. This feature has a lot of positive "\r
 "effect on delta towers."\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:200\r
+#: Cura/util/profile.py:208\r
 msgid "Initial layer thickness (mm)"\r
 msgstr "初始层厚 (mm)"\r
 \r
-#: Cura/util/profile.py:200\r
+#: Cura/util/profile.py:208\r
 msgid ""\r
 "Layer thickness of the bottom layer. A thicker bottom layer makes sticking "\r
 "to the bed easier. Set to 0.0 to have the bottom layer thickness the same as "\r
@@ -1917,11 +1924,11 @@ msgstr ""
 "底层的厚度。较厚的底部能使材料和打印平台粘附得更好。设置为0.0则使用层厚作为初"\r
 "始层厚度"\r
 \r
-#: Cura/util/profile.py:201\r
+#: Cura/util/profile.py:209\r
 msgid "Initial layer line width (%)"\r
 msgstr "初始层线宽(%)"\r
 \r
-#: Cura/util/profile.py:201\r
+#: Cura/util/profile.py:209\r
 msgid ""\r
 "Extra width factor for the extrusion on the first layer, on some printers "\r
 "it's good to have wider extrusion on the first layer to get better bed "\r
@@ -1931,11 +1938,11 @@ msgstr ""
 "下沉进平台的部分不会被打印出来。当模型底部不平整或者太大时，可以使用这个参"\r
 "数，切除一部分模型再打印"\r
 \r
-#: Cura/util/profile.py:202\r
+#: Cura/util/profile.py:210\r
 msgid "Cut off object bottom (mm)"\r
 msgstr "底层切除(mm)"\r
 \r
-#: Cura/util/profile.py:202\r
+#: Cura/util/profile.py:210\r
 msgid ""\r
 "Sinks the object into the platform, this can be used for objects that do not "\r
 "have a flat bottom and thus create a too small first layer."\r
@@ -1944,26 +1951,26 @@ msgstr ""
 "下沉进平台的部分不会被打印出来。当模型底部不平整或者太大时，可以使用这个参"\r
 "数，切除一部分模型再打印"\r
 \r
-#: Cura/util/profile.py:204\r
+#: Cura/util/profile.py:212\r
 msgid "Dual extrusion overlap (mm)"\r
 msgstr "两次挤出重叠(mm)"\r
 \r
-#: Cura/util/profile.py:204\r
+#: Cura/util/profile.py:212\r
 msgid ""\r
 "Add a certain amount of overlapping extrusion on dual-extrusion prints. This "\r
 "bonds the different colors together."\r
 msgstr "添加一定的重叠挤出,这样能使两个不同的颜色融合的更好"\r
 \r
-#: Cura/util/profile.py:205 Cura/util/profile.py:206 Cura/util/profile.py:207\r
-#: Cura/util/profile.py:208 Cura/util/profile.py:209\r
+#: Cura/util/profile.py:213 Cura/util/profile.py:214 Cura/util/profile.py:215\r
+#: Cura/util/profile.py:216 Cura/util/profile.py:217\r
 msgid "Speed"\r
 msgstr "速度"\r
 \r
-#: Cura/util/profile.py:205\r
+#: Cura/util/profile.py:213\r
 msgid "Travel speed (mm/s)"\r
 msgstr "移动速度 (mm/s)"\r
 \r
-#: Cura/util/profile.py:205\r
+#: Cura/util/profile.py:213\r
 msgid ""\r
 "Speed at which travel moves are done, a well built Ultimaker can reach "\r
 "speeds of 250mm/s. But some machines might miss steps then."\r
@@ -1972,11 +1979,11 @@ msgstr ""
 "此移动速度指非打印状态下的移动速度\n"\r
 "建议不要超过150mm/s,否则可能造成电机丢步"\r
 \r
-#: Cura/util/profile.py:206\r
+#: Cura/util/profile.py:214\r
 msgid "Bottom layer speed (mm/s)"\r
 msgstr "底层速度 (mm/s)"\r
 \r
-#: Cura/util/profile.py:206\r
+#: Cura/util/profile.py:214\r
 msgid ""\r
 "Print speed for the bottom layer, you want to print the first layer slower "\r
 "so it sticks better to the printer bed."\r
@@ -1984,11 +1991,11 @@ msgstr ""
 "打印底层的速度\n"\r
 "这个值通常会设置的很低，这样能使底层和平台粘附的更好"\r
 \r
-#: Cura/util/profile.py:207\r
+#: Cura/util/profile.py:215\r
 msgid "Infill speed (mm/s)"\r
 msgstr "填充速度 (mm/s)"\r
 \r
-#: Cura/util/profile.py:207\r
+#: Cura/util/profile.py:215\r
 msgid ""\r
 "Speed at which infill parts are printed. If set to 0 then the print speed is "\r
 "used for the infill. Printing the infill faster can greatly reduce printing "\r
@@ -1998,11 +2005,11 @@ msgstr ""
 "当设置为0时，会使用打印速度作为填充速度。高速打印填充能节省很多打印时间，但是"\r
 "可能会对打印质量照成一定消极影响"\r
 \r
-#: Cura/util/profile.py:208\r
+#: Cura/util/profile.py:216\r
 msgid "Outer shell speed (mm/s)"\r
 msgstr "外壳速度 (mm/s)"\r
 \r
-#: Cura/util/profile.py:208\r
+#: Cura/util/profile.py:216\r
 msgid ""\r
 "Speed at which outer shell is printed. If set to 0 then the print speed is "\r
 "used. Printing the outer shell at a lower speed improves the final skin "\r
@@ -2014,11 +2021,11 @@ msgstr ""
 "使用较低的打印速度可以提高模型打印质量，但是如果外壳和内部的打印速度相差较"\r
 "大，可能会对打印质量有一些消极影响"\r
 \r
-#: Cura/util/profile.py:209\r
+#: Cura/util/profile.py:217\r
 msgid "Inner shell speed (mm/s)"\r
 msgstr "内壁速度 (mm/s)"\r
 \r
-#: Cura/util/profile.py:209\r
+#: Cura/util/profile.py:217\r
 msgid ""\r
 "Speed at which inner shells are printed. If set to 0 then the print speed is "\r
 "used. Printing the inner shell faster then the outer shell will reduce "\r
@@ -2030,17 +2037,17 @@ msgstr ""
 "使用较高的打印机速度可以减少模型的打印时间，需要设置好外壳速度、打印速度、填"\r
 "充速度之间的关系"\r
 \r
-#: Cura/util/profile.py:210 Cura/util/profile.py:211 Cura/util/profile.py:216\r
-#: Cura/util/profile.py:217 Cura/util/profile.py:218 Cura/util/profile.py:219\r
-#: Cura/util/profile.py:220\r
+#: Cura/util/profile.py:218 Cura/util/profile.py:219 Cura/util/profile.py:224\r
+#: Cura/util/profile.py:225 Cura/util/profile.py:226 Cura/util/profile.py:227\r
+#: Cura/util/profile.py:228\r
 msgid "Cool"\r
 msgstr "冷却"\r
 \r
-#: Cura/util/profile.py:210\r
+#: Cura/util/profile.py:218\r
 msgid "Minimal layer time (sec)"\r
 msgstr "每层最小打印时间(sec)"\r
 \r
-#: Cura/util/profile.py:210\r
+#: Cura/util/profile.py:218\r
 msgid ""\r
 "Minimum time spent in a layer, gives the layer time to cool down before the "\r
 "next layer is put on top. If the layer will be placed down too fast the "\r
@@ -2051,11 +2058,11 @@ msgstr ""
 "在打印下一层前留一定时间让当前层冷却。如果当前层会被很快打印完，那么打印机会"\r
 "适当降低速度，以保证有这个设定时间"\r
 \r
-#: Cura/util/profile.py:211\r
+#: Cura/util/profile.py:219\r
 msgid "Enable cooling fan"\r
 msgstr "开启风扇冷却"\r
 \r
-#: Cura/util/profile.py:211\r
+#: Cura/util/profile.py:219\r
 msgid ""\r
 "Enable the cooling fan during the print. The extra cooling from the cooling "\r
 "fan is essential during faster prints."\r
@@ -2063,11 +2070,15 @@ msgstr ""
 "在打印期间开启风扇冷却\n"\r
 "在快速打印时开启风扇冷却是很有必要的"\r
 \r
-#: Cura/util/profile.py:213\r
+#: Cura/util/profile.py:221 Cura/util/profile.py:222 Cura/util/profile.py:223\r
+msgid "Skirt"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:221\r
 msgid "Line count"\r
 msgstr "线数"\r
 \r
-#: Cura/util/profile.py:213\r
+#: Cura/util/profile.py:221\r
 msgid ""\r
 "The skirt is a line drawn around the object at the first layer. This helps "\r
 "to prime your extruder, and to see if the object fits on your platform.\n"\r
@@ -2075,54 +2086,54 @@ msgid ""
 "priming your extruder better for small objects."\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:214\r
+#: Cura/util/profile.py:222\r
 msgid "Start distance (mm)"\r
 msgstr "开始距离(mm)"\r
 \r
-#: Cura/util/profile.py:214\r
+#: Cura/util/profile.py:222\r
 msgid ""\r
 "The distance between the skirt and the first layer.\n"\r
 "This is the minimal distance, multiple skirt lines will be put outwards from "\r
 "this distance."\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:215\r
+#: Cura/util/profile.py:223\r
 msgid "Minimal length (mm)"\r
 msgstr "最小距离(mm)"\r
 \r
-#: Cura/util/profile.py:215\r
+#: Cura/util/profile.py:223\r
 msgid ""\r
 "The minimal length of the skirt, if this minimal length is not reached it "\r
 "will add more skirt lines to reach this minimal lenght.\n"\r
 "Note: If the line count is set to 0 this is ignored."\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:216\r
+#: Cura/util/profile.py:224\r
 msgid "Fan full on at height (mm)"\r
 msgstr "风扇全速开启高度(mm)"\r
 \r
-#: Cura/util/profile.py:216\r
+#: Cura/util/profile.py:224\r
 msgid ""\r
 "The height at which the fan is turned on completely. For the layers below "\r
 "this the fan speed is scaled linearly with the fan off at layer 0."\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:217\r
+#: Cura/util/profile.py:225\r
 msgid "Fan speed min (%)"\r
 msgstr "风扇最小速度(%)"\r
 \r
-#: Cura/util/profile.py:217\r
+#: Cura/util/profile.py:225\r
 msgid ""\r
 "When the fan is turned on, it is enabled at this speed setting. If cool "\r
 "slows down the layer, the fan is adjusted between the min and max speed. "\r
 "Minimal fan speed is used if the layer is not slowed down due to cooling."\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:218\r
+#: Cura/util/profile.py:226\r
 msgid "Fan speed max (%)"\r
 msgstr "风扇最大速度(%)"\r
 \r
-#: Cura/util/profile.py:218\r
+#: Cura/util/profile.py:226\r
 msgid ""\r
 "When the fan is turned on, it is enabled at this speed setting. If cool "\r
 "slows down the layer, the fan is adjusted between the min and max speed. "\r
@@ -2130,67 +2141,67 @@ msgid ""
 "than 200%."\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:219\r
+#: Cura/util/profile.py:227\r
 msgid "Minimum speed (mm/s)"\r
 msgstr "最小速度 (mm/s)"\r
 \r
-#: Cura/util/profile.py:219\r
+#: Cura/util/profile.py:227\r
 msgid ""\r
 "The minimal layer time can cause the print to slow down so much it starts to "\r
 "ooze. The minimal feedrate protects against this. Even if a print gets "\r
 "slowed down it will never be slower than this minimal speed."\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:220\r
+#: Cura/util/profile.py:228\r
 msgid "Cool head lift"\r
 msgstr "喷头移开冷却"\r
 \r
-#: Cura/util/profile.py:220\r
+#: Cura/util/profile.py:228\r
 msgid ""\r
 "Lift the head if the minimal speed is hit because of cool slowdown, and wait "\r
 "the extra time so the minimal layer time is always hit."\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:221 Cura/util/profile.py:222 Cura/util/profile.py:223\r
+#: Cura/util/profile.py:229 Cura/util/profile.py:230 Cura/util/profile.py:231\r
 msgid "Infill"\r
 msgstr "填充"\r
 \r
-#: Cura/util/profile.py:221\r
+#: Cura/util/profile.py:229\r
 msgid "Solid infill top"\r
 msgstr "填充顶层"\r
 \r
-#: Cura/util/profile.py:221\r
+#: Cura/util/profile.py:229\r
 msgid ""\r
 "Create a solid top surface, if set to false the top is filled with the fill "\r
 "percentage. Useful for cups/vases."\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:222\r
+#: Cura/util/profile.py:230\r
 msgid "Solid infill bottom"\r
 msgstr "填充底层"\r
 \r
-#: Cura/util/profile.py:222\r
+#: Cura/util/profile.py:230\r
 msgid ""\r
 "Create a solid bottom surface, if set to false the bottom is filled with the "\r
 "fill percentage. Useful for buildings."\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:223\r
+#: Cura/util/profile.py:231\r
 msgid "Infill overlap (%)"\r
 msgstr "填充重合(%)"\r
 \r
-#: Cura/util/profile.py:223\r
+#: Cura/util/profile.py:231\r
 msgid ""\r
 "Amount of overlap between the infill and the walls. There is a slight "\r
 "overlap with the walls and the infill so the walls connect firmly to the "\r
 "infill."\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:224\r
+#: Cura/util/profile.py:232\r
 msgid "Structure type"\r
 msgstr "支撑类型"\r
 \r
-#: Cura/util/profile.py:224\r
+#: Cura/util/profile.py:232\r
 msgid ""\r
 "The type of support structure.\n"\r
 "Grid is very strong and can come off in 1 piece, however, sometimes it is "\r
@@ -2200,54 +2211,58 @@ msgid ""
 "prints."\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:225\r
+#: Cura/util/profile.py:233\r
 msgid "Overhang angle for support (deg)"\r
 msgstr "支撑临界角(deg)"\r
 \r
-#: Cura/util/profile.py:225\r
+#: Cura/util/profile.py:233\r
 msgid ""\r
-"The minimal angle that overhangs need to have to get support. With 0 degree "\r
-"being horizontal and 90 degree being vertical."\r
+"The minimal angle that overhangs need to have to get support. With 90 degree "\r
+"being horizontal and 0 degree being vertical."\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:226\r
+#: Cura/util/profile.py:234\r
 msgid "Fill amount (%)"\r
 msgstr "支撑密度"\r
 \r
-#: Cura/util/profile.py:226\r
+#: Cura/util/profile.py:234\r
 #, python-format\r
 msgid ""\r
 "Amount of infill structure in the support material, less material gives "\r
 "weaker support which is easier to remove. 15% seems to be a good average."\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:227\r
+#: Cura/util/profile.py:235\r
 msgid "Distance X/Y (mm)"\r
 msgstr "X/Y轴距离"\r
 \r
-#: Cura/util/profile.py:227\r
+#: Cura/util/profile.py:235\r
 msgid ""\r
 "Distance of the support material from the print, in the X/Y directions.\n"\r
 "0.7mm gives a nice distance from the print so the support does not stick to "\r
 "the print."\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:228\r
+#: Cura/util/profile.py:236\r
 msgid "Distance Z (mm)"\r
 msgstr "Z轴距离"\r
 \r
-#: Cura/util/profile.py:228\r
+#: Cura/util/profile.py:236\r
 msgid ""\r
 "Distance from the top/bottom of the support to the print. A small gap here "\r
 "makes it easier to remove the support but makes the print a bit uglier.\n"\r
 "0.15mm gives a good seperation of the support material."\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:229\r
+#: Cura/util/profile.py:237 Cura/util/profile.py:238\r
+msgid "Black Magic"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:237\r
 msgid "Spiralize the outer contour"\r
 msgstr "平滑抬升"\r
 \r
-#: Cura/util/profile.py:229\r
+#: Cura/util/profile.py:237\r
 msgid ""\r
 "Spiralize is smoothing out the Z move of the outer edge. This will create a "\r
 "steady Z increase over the whole print. This feature turns a solid object "\r
@@ -2257,119 +2272,147 @@ msgstr ""
 "开启后，可以螺旋状打印表面\n"\r
 "打印出个表面非常光滑，但会丢失内部填充"\r
 \r
-#: Cura/util/profile.py:230\r
+#: Cura/util/profile.py:238\r
 msgid "Only follow mesh surface"\r
 msgstr "平滑表面"\r
 \r
-#: Cura/util/profile.py:230\r
+#: Cura/util/profile.py:238\r
 msgid ""\r
 "Only follow the mesh surfaces of the 3D model, do not do anything else. No "\r
 "infill, no top/bottom, nothing."\r
 msgstr "开启后仅打印表面，顶、底、内部填充都会丢失"\r
 \r
-#: Cura/util/profile.py:232\r
+#: Cura/util/profile.py:240\r
 msgid "Brim line amount"\r
 msgstr "边沿走线圈数"\r
 \r
-#: Cura/util/profile.py:232\r
+#: Cura/util/profile.py:240\r
 msgid ""\r
 "The amount of lines used for a brim, more lines means a larger brim which "\r
 "sticks better, but this also makes your effective print area smaller."\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:233\r
+#: Cura/util/profile.py:241\r
 msgid "Extra margin (mm)"\r
 msgstr "额外边缘(mm)"\r
 \r
-#: Cura/util/profile.py:233\r
+#: Cura/util/profile.py:241\r
 msgid ""\r
 "If the raft is enabled, this is the extra raft area around the object which "\r
 "is also rafted. Increasing this margin will create a stronger raft while "\r
 "using more material and leaving less area for your print."\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:234\r
+#: Cura/util/profile.py:242\r
 msgid "Line spacing (mm)"\r
 msgstr "走线间隔(mm)"\r
 \r
-#: Cura/util/profile.py:234\r
+#: Cura/util/profile.py:242\r
 msgid ""\r
 "When you are using the raft this is the distance between the centerlines of "\r
 "the raft line."\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:235\r
+#: Cura/util/profile.py:243\r
 msgid "Base thickness (mm)"\r
 msgstr "基底层厚度(mm)"\r
 \r
-#: Cura/util/profile.py:235\r
+#: Cura/util/profile.py:243\r
 msgid ""\r
 "When you are using the raft this is the thickness of the base layer which is "\r
 "put down."\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:236\r
+#: Cura/util/profile.py:244\r
 msgid "Base line width (mm)"\r
 msgstr "基底层走线宽度(mm)"\r
 \r
-#: Cura/util/profile.py:236\r
+#: Cura/util/profile.py:244\r
 msgid ""\r
 "When you are using the raft this is the width of the base layer lines which "\r
 "are put down."\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:237\r
+#: Cura/util/profile.py:245\r
 msgid "Interface thickness (mm)"\r
 msgstr "接触层厚度(mm)"\r
 \r
-#: Cura/util/profile.py:237\r
+#: Cura/util/profile.py:245\r
 msgid ""\r
 "When you are using the raft this is the thickness of the interface layer "\r
 "which is put down."\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:238\r
+#: Cura/util/profile.py:246\r
 msgid "Interface line width (mm)"\r
 msgstr "接触层走线宽度 (mm)"\r
 \r
-#: Cura/util/profile.py:238\r
+#: Cura/util/profile.py:246\r
 msgid ""\r
 "When you are using the raft this is the width of the interface layer lines "\r
 "which are put down."\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:239\r
+#: Cura/util/profile.py:247\r
 msgid "Airgap"\r
 msgstr "拼合间隙"\r
 \r
-#: Cura/util/profile.py:239\r
+#: Cura/util/profile.py:247\r
+msgid "Gap between the last layer of the raft the whole print."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:248\r
+msgid "First Layer Airgap"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:248\r
+#, fuzzy\r
 msgid ""\r
 "Gap between the last layer of the raft and the first printing layer. A small "\r
-"gap of 0.2mm works wonders on PLA and makes the raft easy to remove."\r
+"gap of 0.2mm works wonders on PLA and makes the raft easy to remove. This "\r
+"value is added on top of the 'Airgap' setting."\r
 msgstr ""\r
 "在基底和模型之间的间隙距离\n"\r
 "这个间隙能让模型更容易取下，使用PLA建议设为0.2mm"\r
 \r
-#: Cura/util/profile.py:240\r
+#: Cura/util/profile.py:249\r
 msgid "Surface layers"\r
 msgstr "表层"\r
 \r
-#: Cura/util/profile.py:240\r
+#: Cura/util/profile.py:249\r
 msgid ""\r
 "Amount of surface layers put on top of the raft, these are fully filled "\r
 "layers on which the model is printed."\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:241 Cura/util/profile.py:242 Cura/util/profile.py:243\r
-#: Cura/util/profile.py:244\r
+#: Cura/util/profile.py:250\r
+#, fuzzy\r
+msgid "Surface layer thickness (mm)"\r
+msgstr "初始层厚 (mm)"\r
+\r
+#: Cura/util/profile.py:250\r
+msgid "Thickness of each surface layer."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:251\r
+#, fuzzy\r
+msgid "Surface layer line width (mm)"\r
+msgstr "接触层走线宽度 (mm)"\r
+\r
+#: Cura/util/profile.py:251\r
+msgid "Width of the lines for each surface layer."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:252 Cura/util/profile.py:253 Cura/util/profile.py:254\r
+#: Cura/util/profile.py:255\r
 msgid "Fix horrible"\r
 msgstr "缺陷修复"\r
 \r
-#: Cura/util/profile.py:241\r
+#: Cura/util/profile.py:252\r
 msgid "Combine everything (Type-A)"\r
 msgstr "闭合面片(Type-A)"\r
 \r
-#: Cura/util/profile.py:241 Cura/util/profile.py:242\r
+#: Cura/util/profile.py:252 Cura/util/profile.py:253\r
 msgid ""\r
 "This expert option adds all parts of the model together. The result is "\r
 "usually that internal cavities disappear. Depending on the model this can be "\r
@@ -2378,15 +2421,15 @@ msgid ""
 "Type-B ignores all internal holes and only keeps the outside shape per layer."\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:242\r
+#: Cura/util/profile.py:253\r
 msgid "Combine everything (Type-B)"\r
 msgstr "闭合面片(Type-B)"\r
 \r
-#: Cura/util/profile.py:243\r
+#: Cura/util/profile.py:254\r
 msgid "Keep open faces"\r
 msgstr "保持开放面"\r
 \r
-#: Cura/util/profile.py:243\r
+#: Cura/util/profile.py:254\r
 msgid ""\r
 "This expert option keeps all the open bits of the model intact. Normally "\r
 "Cura tries to stitch up small holes and remove everything with big holes, "\r
@@ -2397,11 +2440,11 @@ msgid ""
 "risk."\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:244\r
+#: Cura/util/profile.py:255\r
 msgid "Extensive stitching"\r
 msgstr "泛拼接"\r
 \r
-#: Cura/util/profile.py:244\r
+#: Cura/util/profile.py:255\r
 msgid ""\r
 "Extensive stitching tries to fix up open holes in the model by closing the "\r
 "hole with touching polygons. This algorthm is quite expensive and could "\r
@@ -2410,159 +2453,159 @@ msgid ""
 "risk."\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:470\r
+#: Cura/util/profile.py:481\r
 msgid "Save profile on slice"\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:470\r
+#: Cura/util/profile.py:481\r
 msgid ""\r
 "When slicing save the profile as [stl_file]_profile.ini next to the model."\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:471\r
+#: Cura/util/profile.py:482\r
 msgid "Cost (price/kg)"\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:471\r
+#: Cura/util/profile.py:482\r
 msgid "Cost of your filament per kg, to estimate the cost of the final print."\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:472\r
+#: Cura/util/profile.py:483\r
 msgid "Cost (price/m)"\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:472\r
+#: Cura/util/profile.py:483\r
 msgid ""\r
 "Cost of your filament per meter, to estimate the cost of the final print."\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:473\r
+#: Cura/util/profile.py:484\r
 msgid "Auto detect SD card drive"\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:473\r
+#: Cura/util/profile.py:484\r
 msgid ""\r
 "Auto detect the SD card. You can disable this because on some systems "\r
 "external hard-drives or USB sticks are detected as SD card."\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:474\r
+#: Cura/util/profile.py:485\r
 msgid "Check for updates"\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:474\r
+#: Cura/util/profile.py:485\r
 msgid "Check for newer versions of Cura on startup"\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:475\r
+#: Cura/util/profile.py:486\r
 msgid "Send usage statistics"\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:475\r
+#: Cura/util/profile.py:486\r
 msgid "Submit anonymous usage information to improve future versions of Cura"\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:477\r
+#: Cura/util/profile.py:488\r
 msgid "Density (kg/m3)"\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:477\r
+#: Cura/util/profile.py:488\r
 msgid ""\r
 "Weight of the filament per m3. Around 1240 for PLA. And around 1040 for ABS. "\r
 "This value is used to estimate the weight if the filament used for the print."\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:478\r
+#: Cura/util/profile.py:489\r
 msgid ""\r
 "Change the language in which Cura runs. Switching language requires a "\r
 "restart of Cura"\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:481\r
+#: Cura/util/profile.py:492\r
 msgid "Model colour"\r
 msgstr "模型颜色"\r
 \r
-#: Cura/util/profile.py:481\r
+#: Cura/util/profile.py:492\r
 msgid "Display color for first extruder"\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:482\r
+#: Cura/util/profile.py:493\r
 msgid "Model colour (2)"\r
 msgstr "模型颜色(2)"\r
 \r
-#: Cura/util/profile.py:482\r
+#: Cura/util/profile.py:493\r
 msgid "Display color for second extruder"\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:483\r
+#: Cura/util/profile.py:494\r
 msgid "Model colour (3)"\r
 msgstr "模型颜色(3)"\r
 \r
-#: Cura/util/profile.py:483\r
+#: Cura/util/profile.py:494\r
 msgid "Display color for third extruder"\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:484\r
+#: Cura/util/profile.py:495\r
 msgid "Model colour (4)"\r
 msgstr "模型颜色(4)"\r
 \r
-#: Cura/util/profile.py:484\r
+#: Cura/util/profile.py:495\r
 msgid "Display color for forth extruder"\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:485\r
+#: Cura/util/profile.py:496\r
 msgid "Printing window type"\r
 msgstr "打印窗口类型"\r
 \r
-#: Cura/util/profile.py:485\r
+#: Cura/util/profile.py:496\r
 msgid "Select the interface used for USB printing."\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:497\r
+#: Cura/util/profile.py:508\r
 msgid "Maximum width (mm)"\r
 msgstr "最大宽度 (mm)"\r
 \r
-#: Cura/util/profile.py:497 Cura/util/profile.py:498 Cura/util/profile.py:499\r
+#: Cura/util/profile.py:508 Cura/util/profile.py:509 Cura/util/profile.py:510\r
 msgid "Size of the machine in mm"\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:498\r
+#: Cura/util/profile.py:509\r
 msgid "Maximum depth (mm)"\r
 msgstr "最大深度(mm)"\r
 \r
-#: Cura/util/profile.py:499\r
+#: Cura/util/profile.py:510\r
 msgid "Maximum height (mm)"\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:500\r
+#: Cura/util/profile.py:511\r
 msgid "Machine center 0,0"\r
 msgstr "平台中心 0,0"\r
 \r
-#: Cura/util/profile.py:500\r
+#: Cura/util/profile.py:511\r
 msgid ""\r
 "Machines firmware defines the center of the bed as 0,0 instead of the front "\r
 "left corner."\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:501\r
+#: Cura/util/profile.py:512\r
 msgid "Build area shape"\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:501\r
+#: Cura/util/profile.py:512\r
 msgid "The shape of machine build area."\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:503\r
+#: Cura/util/profile.py:514\r
 msgid ""\r
 "If you have an heated bed, this enabled heated bed settings (requires "\r
 "restart)"\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:504\r
+#: Cura/util/profile.py:515\r
 msgid "GCode Flavor"\r
 msgstr "Gcode类型"\r
 \r
-#: Cura/util/profile.py:504\r
+#: Cura/util/profile.py:515\r
 msgid ""\r
 "Flavor of generated GCode.\n"\r
 "RepRap is normal 5D GCode which works on Marlin/Sprinter based firmwares.\n"\r
@@ -2574,175 +2617,178 @@ msgid ""
 "Mach3 uses A,B,C instead of E for extruders."\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:505\r
+#: Cura/util/profile.py:516\r
 msgid "Extruder count"\r
 msgstr "挤出机数量"\r
 \r
-#: Cura/util/profile.py:505\r
+#: Cura/util/profile.py:516\r
 msgid "Amount of extruders in your machine."\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:506 Cura/util/profile.py:508 Cura/util/profile.py:510\r
+#: Cura/util/profile.py:517 Cura/util/profile.py:519 Cura/util/profile.py:521\r
 msgid "Offset X"\r
 msgstr "X补偿"\r
 \r
-#: Cura/util/profile.py:506 Cura/util/profile.py:507\r
+#: Cura/util/profile.py:517 Cura/util/profile.py:518\r
 msgid "The offset of your secondary extruder compared to the primary."\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:507 Cura/util/profile.py:509 Cura/util/profile.py:511\r
+#: Cura/util/profile.py:518 Cura/util/profile.py:520 Cura/util/profile.py:522\r
 msgid "Offset Y"\r
 msgstr "Y补偿"\r
 \r
-#: Cura/util/profile.py:508 Cura/util/profile.py:509\r
+#: Cura/util/profile.py:519 Cura/util/profile.py:520\r
 msgid "The offset of your tertiary extruder compared to the primary."\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:510 Cura/util/profile.py:511\r
+#: Cura/util/profile.py:521 Cura/util/profile.py:522\r
 msgid "The offset of your forth extruder compared to the primary."\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:512\r
+#: Cura/util/profile.py:523\r
 msgid "E-Steps per 1mm filament"\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:512\r
+#: Cura/util/profile.py:523\r
 msgid ""\r
 "Amount of steps per mm filament extrusion. If set to 0 then this value is "\r
 "ignored and the value in your firmware is used."\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:513\r
+#: Cura/util/profile.py:524\r
 msgid "Serial port"\r
 msgstr "串口"\r
 \r
-#: Cura/util/profile.py:513\r
+#: Cura/util/profile.py:524\r
 msgid "Serial port to use for communication with the printer"\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:515\r
+#: Cura/util/profile.py:526\r
 msgid "Baudrate"\r
 msgstr "波特率"\r
 \r
-#: Cura/util/profile.py:515\r
+#: Cura/util/profile.py:526\r
 msgid ""\r
 "Speed of the serial port communication\n"\r
 "Needs to match your firmware settings\n"\r
 "Common values are 250000, 115200, 57600"\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:518\r
+#: Cura/util/profile.py:529\r
 msgid "Head size towards X min (mm)"\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:518\r
+#: Cura/util/profile.py:529\r
 msgid ""\r
 "The head size when printing multiple objects, measured from the tip of the "\r
 "nozzle towards the outer part of the head. 75mm for an Ultimaker if the fan "\r
 "is on the left side."\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:519\r
+#: Cura/util/profile.py:530\r
 msgid "Head size towards Y min (mm)"\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:519 Cura/util/profile.py:520\r
+#: Cura/util/profile.py:530 Cura/util/profile.py:531\r
 msgid ""\r
 "The head size when printing multiple objects, measured from the tip of the "\r
 "nozzle towards the outer part of the head. 18mm for an Ultimaker if the fan "\r
 "is on the left side."\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:520\r
+#: Cura/util/profile.py:531\r
 msgid "Head size towards X max (mm)"\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:521\r
+#: Cura/util/profile.py:532\r
 msgid "Head size towards Y max (mm)"\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:521\r
+#: Cura/util/profile.py:532\r
 msgid ""\r
 "The head size when printing multiple objects, measured from the tip of the "\r
 "nozzle towards the outer part of the head. 35mm for an Ultimaker if the fan "\r
 "is on the left side."\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:522\r
+#: Cura/util/profile.py:533\r
 msgid "Printer gantry height (mm)"\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:522\r
+#: Cura/util/profile.py:533\r
 msgid ""\r
 "The height of the gantry holding up the printer head. If an object is higher "\r
 "then this then you cannot print multiple objects one for one. 60mm for an "\r
 "Ultimaker."\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:524\r
+#: Cura/util/profile.py:535\r
 #, python-format\r
 msgid "More flow than 150% is rare and usually not recommended."\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:525\r
+#: Cura/util/profile.py:536\r
 #, python-format\r
 msgid "Less flow than 50% is rare and usually not recommended."\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:526\r
+#: Cura/util/profile.py:537\r
 #, python-format\r
 msgid ""\r
 "Thicker layers then %.2fmm (80%% nozzle size) usually give bad results and "\r
 "are not recommended."\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:528\r
+#: Cura/util/profile.py:539\r
 msgid ""\r
 "It is highly unlikely that your machine can achieve a printing speed above "\r
 "150mm/s"\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:530 Cura/util/profile.py:531 Cura/util/profile.py:532\r
-#: Cura/util/profile.py:533\r
+#: Cura/util/profile.py:541 Cura/util/profile.py:542 Cura/util/profile.py:543\r
+#: Cura/util/profile.py:544\r
 msgid "Temperatures above 260C could damage your machine, be careful!"\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:534 Cura/util/profile.py:535 Cura/util/profile.py:536\r
-#: Cura/util/profile.py:537\r
+#: Cura/util/profile.py:545 Cura/util/profile.py:546 Cura/util/profile.py:547\r
+#: Cura/util/profile.py:548\r
 msgid ""\r
 "Are you sure your filament is that thick? Normal filament is around 3mm or "\r
 "1.75mm."\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:538\r
+#: Cura/util/profile.py:549\r
 msgid ""\r
 "It is highly unlikely that your machine can achieve a travel speed above "\r
 "300mm/s"\r
 msgstr ""\r
 \r
-#: Cura/util/profile.py:539\r
+#: Cura/util/profile.py:550\r
 #, python-format\r
 msgid ""\r
 "A bottom layer of more then %.2fmm (3/4 nozzle size) usually give bad "\r
 "results and is not recommended."\r
 msgstr ""\r
 \r
-#: Cura/util/sliceEngine.py:92\r
+#: Cura/util/sliceEngine.py:93\r
 #, python-format\r
 msgid "%d minutes"\r
 msgstr ""\r
 \r
-#: Cura/util/sliceEngine.py:94\r
+#: Cura/util/sliceEngine.py:95\r
 #, python-format\r
 msgid "%d hour %d minutes"\r
 msgstr ""\r
 \r
-#: Cura/util/sliceEngine.py:95\r
+#: Cura/util/sliceEngine.py:96\r
 #, python-format\r
 msgid "%d hours %d minutes"\r
 msgstr ""\r
 \r
-#: Cura/util/sliceEngine.py:100\r
+#: Cura/util/sliceEngine.py:101\r
 #, python-format\r
 msgid "%0.2f meter %0.0f gram"\r
 msgstr ""\r
+\r
+#~ msgid "Run first run wizard..."\r
+#~ msgstr "运行首次使用向导..."\r