Update translation files with latest strings from code.

[cura.git] / resources / locale / en / LC_MESSAGES / Cura.po

diff --git a/resources/locale/en/LC_MESSAGES/Cura.po b/resources/locale/en/LC_MESSAGES/Cura.po
index e78b41756249277121764e1a0d206c5fb810cc20..2ce531d0600f50b15edf2feac00766332c6cdeb2 100644 (file)
--- a/resources/locale/en/LC_MESSAGES/Cura.po
+++ b/resources/locale/en/LC_MESSAGES/Cura.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""\r
 "Project-Id-Version: Cura\n"\r
 "Report-Msgid-Bugs-To: \n"\r
-"POT-Creation-Date: 2014-07-28 17:57+0200\n"\r
+"POT-Creation-Date: 2014-10-13 09:32+0200\n"\r
 "PO-Revision-Date: 2013-09-27 09:41+0100\n"\r
 "Last-Translator: \n"\r
 "Language-Team: LANGUAGE <LL@li.org>\n"\r
@@ -16,39 +16,43 @@ msgstr ""
 "Content-Transfer-Encoding: 8bit\n"\r
 "X-Generator: Poedit 1.5.7\n"\r
 \r
-#: Cura/gui/app.py:144 Cura/gui/mainWindow.py:566\r
+#: Cura/gui/app.py:140 Cura/gui/mainWindow.py:566\r
 msgid "A new version of Cura is available, would you like to download?"\r
 msgstr ""\r
 \r
-#: Cura/gui/app.py:144 Cura/gui/mainWindow.py:566\r
+#: Cura/gui/app.py:140 Cura/gui/mainWindow.py:566\r
 msgid "New version available"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:223\r
+#: Cura/gui/configWizard.py:231\r
 msgid "Add new machine wizard"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:225\r
+#: Cura/gui/configWizard.py:233\r
 msgid "First time run wizard"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:226\r
+#: Cura/gui/configWizard.py:234\r
 msgid "Welcome, and thanks for trying Cura!"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:228\r
+#: Cura/gui/configWizard.py:236\r
 msgid "This wizard will help you in setting up Cura for your machine."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:262\r
+#: Cura/gui/configWizard.py:239\r
+msgid "Select your language:"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:280\r
 msgid "Select which Printrbot machine you have:"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:299\r
+#: Cura/gui/configWizard.py:317\r
 msgid "The following pre-defined machine profiles are available"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:300\r
+#: Cura/gui/configWizard.py:318\r
 msgid ""\r
 "Note that these profiles are not guaranteed to give good results,\n"\r
 "or work at all. Extra tweaks might be required.\n"\r
@@ -57,367 +61,371 @@ msgid ""
 "Please report it at the github issue tracker."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:330\r
+#: Cura/gui/configWizard.py:348\r
 msgid "Cura is now ready to be used!"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:335\r
+#: Cura/gui/configWizard.py:353\r
 msgid ""\r
 "RepRap machines can be vastly different, so here you can set your own "\r
 "settings."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:336\r
+#: Cura/gui/configWizard.py:354\r
 msgid ""\r
 "Be sure to review the default profile before running it on your machine."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:337\r
+#: Cura/gui/configWizard.py:355\r
 msgid ""\r
 "If you like a default profile for your machine added,\n"\r
 "then make an issue on github."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:339\r
+#: Cura/gui/configWizard.py:357\r
 msgid "You will have to manually install Marlin or Sprinter firmware."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:341\r
+#: Cura/gui/configWizard.py:359\r
 msgid "Machine name"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:342\r
+#: Cura/gui/configWizard.py:360\r
 msgid "Machine width (mm)"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:343\r
+#: Cura/gui/configWizard.py:361\r
 msgid "Machine depth (mm)"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:344\r
+#: Cura/gui/configWizard.py:362\r
 msgid "Machine height (mm)"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:345 Cura/util/profile.py:175\r
+#: Cura/gui/configWizard.py:363 Cura/util/profile.py:175\r
 msgid "Nozzle size (mm)"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:346 Cura/util/profile.py:503\r
+#: Cura/gui/configWizard.py:364 Cura/util/profile.py:503\r
 msgid "Heated bed"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:347\r
+#: Cura/gui/configWizard.py:365\r
 msgid "Bed center is 0,0,0 (RoStock)"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:367\r
+#: Cura/gui/configWizard.py:385\r
 msgid "Select your machine"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:368\r
+#: Cura/gui/configWizard.py:386\r
 msgid "What kind of machine do you have:"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:377\r
-msgid "Other (Ex: RepRap, MakerBot)"\r
+#: Cura/gui/configWizard.py:401\r
+msgid "Other (Ex: RepRap, MakerBot, Witbox)"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:380\r
+#: Cura/gui/configWizard.py:404\r
 msgid ""\r
 "The collection of anonymous usage information helps with the continued "\r
 "improvement of Cura."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:381\r
+#: Cura/gui/configWizard.py:405\r
 msgid ""\r
 "This does NOT submit your models online nor gathers any privacy related "\r
 "information."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:382\r
+#: Cura/gui/configWizard.py:406\r
 msgid "Submit anonymous usage information:"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:383\r
+#: Cura/gui/configWizard.py:407\r
 msgid "For full details see: http://wiki.ultimaker.com/Cura:stats"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:455\r
+#: Cura/gui/configWizard.py:524\r
 msgid "Select upgraded parts you have"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:456\r
+#: Cura/gui/configWizard.py:525\r
 msgid ""\r
 "To assist you in having better default settings for your Ultimaker\n"\r
 "Cura would like to know which upgrades you have in your machine."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:458\r
+#: Cura/gui/configWizard.py:527\r
 msgid "Extruder drive upgrade"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:459\r
+#: Cura/gui/configWizard.py:528\r
 msgid "Heated printer bed (kit)"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:460\r
+#: Cura/gui/configWizard.py:529\r
 msgid "Heated printer bed (self built)"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:461\r
+#: Cura/gui/configWizard.py:530\r
 msgid "Dual extrusion (experimental)"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:463\r
+#: Cura/gui/configWizard.py:532\r
 msgid ""\r
 "If you have an Ultimaker bought after october 2012 you will have the\n"\r
 "Extruder drive upgrade. If you do not have this upgrade,\n"\r
 "it is highly recommended to improve reliability."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:464\r
+#: Cura/gui/configWizard.py:533\r
 msgid ""\r
 "This upgrade can be bought from the Ultimaker webshop\n"\r
 "or found on thingiverse as thing:26094"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:486\r
+#: Cura/gui/configWizard.py:555\r
 msgid "Upgrade Ultimaker Firmware"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:487\r
+#: Cura/gui/configWizard.py:556\r
 msgid ""\r
 "Firmware is the piece of software running directly on your 3D printer.\n"\r
 "This firmware controls the step motors, regulates the temperature\n"\r
 "and ultimately makes your printer work."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:489\r
+#: Cura/gui/configWizard.py:558\r
 msgid ""\r
 "The firmware shipping with new Ultimakers works, but upgrades\n"\r
 "have been made to make better prints, and make calibration easier."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:491\r
+#: Cura/gui/configWizard.py:560\r
 msgid ""\r
 "Cura requires these new features and thus\n"\r
 "your firmware will most likely need to be upgraded.\n"\r
 "You will get the chance to do so now."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:496\r
+#: Cura/gui/configWizard.py:566\r
 msgid "Do not upgrade to this firmware if:"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:497\r
+#: Cura/gui/configWizard.py:567\r
 msgid "* You have an older machine based on ATMega1280 (Rev 1 machine)"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:498\r
+#: Cura/gui/configWizard.py:568\r
+msgid "* Build your own heated bed"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:569\r
 msgid "* Have other changes in the firmware"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:532\r
+#: Cura/gui/configWizard.py:603\r
 msgid ""\r
 "It is a good idea to do a few sanity checks now on your Ultimaker.\n"\r
 "You can skip these if you know your machine is functional."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:533\r
+#: Cura/gui/configWizard.py:604\r
 msgid "Run checks"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:533\r
+#: Cura/gui/configWizard.py:604\r
 msgid "Skip checks"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:537\r
+#: Cura/gui/configWizard.py:608\r
 msgid "Communication:"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:538\r
+#: Cura/gui/configWizard.py:609\r
 msgid "Temperature:"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:539\r
+#: Cura/gui/configWizard.py:610\r
 msgid "Endstops:"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:544\r
+#: Cura/gui/configWizard.py:615\r
 msgid "Show error log"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:578\r
+#: Cura/gui/configWizard.py:649\r
 msgid "Connecting to machine."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:599\r
+#: Cura/gui/configWizard.py:670\r
 msgid "Cooldown before temperature check."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:605 Cura/gui/configWizard.py:612\r
+#: Cura/gui/configWizard.py:676 Cura/gui/configWizard.py:683\r
 msgid "Checking the heater and temperature sensor."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:623\r
+#: Cura/gui/configWizard.py:694\r
 msgid "Please make sure none of the endstops are pressed."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:636\r
+#: Cura/gui/configWizard.py:707\r
 msgid "Temperature measurement FAILED!"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:641\r
+#: Cura/gui/configWizard.py:712\r
 #, python-format\r
 msgid "Head temperature: %d"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:648 Cura/gui/configWizard.py:657\r
+#: Cura/gui/configWizard.py:719 Cura/gui/configWizard.py:728\r
 #, python-format\r
 msgid "Communication State: %s"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:651\r
+#: Cura/gui/configWizard.py:722\r
 msgid "Failed to establish connection with the printer."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:696\r
-msgid "Please press the right X endstop."\r
-msgstr ""\r
-\r
-#: Cura/gui/configWizard.py:701\r
+#: Cura/gui/configWizard.py:768 Cura/gui/configWizard.py:777\r
 msgid "Please press the left X endstop."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:706\r
-msgid "Please press the front Y endstop."\r
+#: Cura/gui/configWizard.py:772\r
+msgid "Please press the right X endstop."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:711\r
-msgid "Please press the back Y endstop."\r
+#: Cura/gui/configWizard.py:782\r
+msgid "Please press the front Y endstop."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:716\r
+#: Cura/gui/configWizard.py:788 Cura/gui/configWizard.py:797\r
 msgid "Please press the top Z endstop."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:721\r
-msgid "Please press the bottom Z endstop."\r
+#: Cura/gui/configWizard.py:792\r
+msgid "Please press the back Y endstop."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:727\r
+#: Cura/gui/configWizard.py:804 Cura/gui/configWizard.py:817\r
 msgid "Checkup finished"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:770\r
+#: Cura/gui/configWizard.py:811\r
+msgid "Please press the bottom Z endstop."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:860\r
 msgid "Calibrating the Steps Per E requires some manual actions."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:771\r
+#: Cura/gui/configWizard.py:861\r
 msgid "First remove any filament from your machine."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:772\r
+#: Cura/gui/configWizard.py:862\r
 msgid ""\r
 "Next put in your filament so the tip is aligned with the\n"\r
 "top of the extruder drive."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:773\r
+#: Cura/gui/configWizard.py:863\r
 msgid "We'll push the filament 100mm"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:774\r
+#: Cura/gui/configWizard.py:864\r
 msgid "Extrude 100mm filament"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:775\r
+#: Cura/gui/configWizard.py:865\r
 msgid ""\r
 "Now measure the amount of extruded filament:\n"\r
 "(this can be more or less then 100mm)"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:776\r
+#: Cura/gui/configWizard.py:866\r
 msgid "Save"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:777\r
+#: Cura/gui/configWizard.py:867\r
 msgid "This results in the following steps per E:"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:779\r
+#: Cura/gui/configWizard.py:869\r
 msgid "You can repeat these steps to get better calibration."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:782\r
+#: Cura/gui/configWizard.py:872\r
 msgid ""\r
 "If you still have filament in your printer which needs\n"\r
 "heat to remove, press the heat up button below:"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:783\r
+#: Cura/gui/configWizard.py:873\r
 msgid "Heatup for filament removal"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:808 Cura/gui/configWizard.py:842\r
+#: Cura/gui/configWizard.py:898 Cura/gui/configWizard.py:932\r
 msgid ""\r
 "Error: Failed to open serial port to machine\n"\r
 "If this keeps happening, try disconnecting and reconnecting the USB cable"\r
 msgstr ""\r
 \r
-#: Cura/gui/firmwareInstall.py:44\r
+#: Cura/gui/firmwareInstall.py:58\r
 msgid ""\r
 "I am sorry, but Cura does not ship with a default firmware for your machine "\r
 "configuration."\r
 msgstr ""\r
 \r
-#: Cura/gui/firmwareInstall.py:44 Cura/gui/firmwareInstall.py:48\r
-#: Cura/gui/firmwareInstall.py:103 Cura/gui/mainWindow.py:508\r
+#: Cura/gui/firmwareInstall.py:58 Cura/gui/firmwareInstall.py:62\r
+#: Cura/gui/firmwareInstall.py:117 Cura/gui/mainWindow.py:508\r
 msgid "Firmware update"\r
 msgstr ""\r
 \r
-#: Cura/gui/firmwareInstall.py:48\r
+#: Cura/gui/firmwareInstall.py:62\r
 msgid ""\r
 "Cura only supports firmware updates for ATMega2560 based hardware.\n"\r
 "So updating your RepRap with Cura might or might not work."\r
 msgstr ""\r
 \r
-#: Cura/gui/firmwareInstall.py:56\r
+#: Cura/gui/firmwareInstall.py:70\r
 msgid "OK"\r
 msgstr ""\r
 \r
-#: Cura/gui/firmwareInstall.py:77\r
+#: Cura/gui/firmwareInstall.py:91\r
 msgid "Reading firmware..."\r
 msgstr ""\r
 \r
-#: Cura/gui/firmwareInstall.py:79\r
+#: Cura/gui/firmwareInstall.py:93\r
 msgid "Connecting to machine..."\r
 msgstr ""\r
 \r
-#: Cura/gui/firmwareInstall.py:83\r
+#: Cura/gui/firmwareInstall.py:97\r
 msgid ""\r
 "Please connect the printer to\n"\r
 "your computer with the USB cable."\r
 msgstr ""\r
 \r
-#: Cura/gui/firmwareInstall.py:102\r
+#: Cura/gui/firmwareInstall.py:116\r
 msgid ""\r
 "Failed to find machine for firmware upgrade\n"\r
 "Is your machine connected to the PC?"\r
 msgstr ""\r
 \r
-#: Cura/gui/firmwareInstall.py:107\r
+#: Cura/gui/firmwareInstall.py:121\r
 msgid "Uploading firmware..."\r
 msgstr ""\r
 \r
-#: Cura/gui/firmwareInstall.py:110\r
+#: Cura/gui/firmwareInstall.py:124\r
 #, python-format\r
 msgid ""\r
 "Done!\n"\r
 "Installed firmware: %s"\r
 msgstr ""\r
 \r
-#: Cura/gui/firmwareInstall.py:112\r
+#: Cura/gui/firmwareInstall.py:126\r
 msgid "Failed to write firmware.\n"\r
 msgstr ""\r
 \r
@@ -860,7 +868,7 @@ msgstr ""
 msgid "Save 3D model"\r
 msgstr ""\r
 \r
-#: Cura/gui/sceneView.py:276 Cura/gui/sceneView.py:914\r
+#: Cura/gui/sceneView.py:276 Cura/gui/sceneView.py:915\r
 #, python-format\r
 msgid "Print with %s"\r
 msgstr ""\r
@@ -869,63 +877,63 @@ msgstr ""
 msgid "Slice engine log..."\r
 msgstr ""\r
 \r
-#: Cura/gui/sceneView.py:305 Cura/gui/sceneView.py:917\r
+#: Cura/gui/sceneView.py:305 Cura/gui/sceneView.py:918\r
 msgid "Save toolpath"\r
 msgstr ""\r
 \r
-#: Cura/gui/sceneView.py:351\r
+#: Cura/gui/sceneView.py:352\r
 msgid "The slicing engine reported the following"\r
 msgstr ""\r
 \r
-#: Cura/gui/sceneView.py:351\r
+#: Cura/gui/sceneView.py:352\r
 msgid "Engine log..."\r
 msgstr ""\r
 \r
-#: Cura/gui/sceneView.py:490\r
+#: Cura/gui/sceneView.py:491\r
 msgid "How many copies do you want?"\r
 msgstr ""\r
 \r
-#: Cura/gui/sceneView.py:490\r
+#: Cura/gui/sceneView.py:491\r
 msgid "Number of copies"\r
 msgstr ""\r
 \r
-#: Cura/gui/sceneView.py:490\r
+#: Cura/gui/sceneView.py:491\r
 msgid "Multiply"\r
 msgstr ""\r
 \r
-#: Cura/gui/sceneView.py:780\r
+#: Cura/gui/sceneView.py:781\r
 msgid "Center on platform"\r
 msgstr ""\r
 \r
-#: Cura/gui/sceneView.py:781\r
+#: Cura/gui/sceneView.py:782\r
 msgid "Delete object"\r
 msgstr ""\r
 \r
-#: Cura/gui/sceneView.py:782\r
+#: Cura/gui/sceneView.py:783\r
 msgid "Multiply object"\r
 msgstr ""\r
 \r
-#: Cura/gui/sceneView.py:783\r
+#: Cura/gui/sceneView.py:784\r
 msgid "Split object into parts"\r
 msgstr ""\r
 \r
-#: Cura/gui/sceneView.py:785\r
+#: Cura/gui/sceneView.py:786\r
 msgid "Dual extrusion merge"\r
 msgstr ""\r
 \r
-#: Cura/gui/sceneView.py:787\r
+#: Cura/gui/sceneView.py:788\r
 msgid "Delete all objects"\r
 msgstr ""\r
 \r
-#: Cura/gui/sceneView.py:788\r
+#: Cura/gui/sceneView.py:789\r
 msgid "Reload all objects"\r
 msgstr ""\r
 \r
-#: Cura/gui/sceneView.py:911\r
+#: Cura/gui/sceneView.py:912\r
 msgid "Toolpath to SD"\r
 msgstr ""\r
 \r
-#: Cura/gui/sceneView.py:1205\r
+#: Cura/gui/sceneView.py:1206\r
 msgid "Overhang view not working due to lack of OpenGL shaders support."\r
 msgstr ""\r
 \r