setting('layer_height', 0.1, float, 'basic', _('Quality')).setRange(0.0001).setLabel(_("Layer height (mm)"), _("Layer height in millimeters.\nThis is the most important setting to determine the quality of your print. Normal quality prints are 0.1mm, high quality is 0.06mm. You can go up to 0.25mm with an Ultimaker for very fast prints at low quality."))
setting('wall_thickness', 0.8, float, 'basic', _('Quality')).setRange(0.0).setLabel(_("Shell thickness (mm)"), _("Thickness of the outside shell in the horizontal direction.\nThis is used in combination with the nozzle size to define the number\nof perimeter lines and the thickness of those perimeter lines."))
-setting('retraction_enable', False, bool, 'basic', _('Quality')).setLabel(_("Enable retraction"), _("Retract the filament when the nozzle is moving over a none-printed area. Details about the retraction can be configured in the advanced tab."))
+setting('retraction_enable', True, bool, 'basic', _('Quality')).setLabel(_("Enable retraction"), _("Retract the filament when the nozzle is moving over a none-printed area. Details about the retraction can be configured in the advanced tab."))
setting('solid_layer_thickness', 0.6, float, 'basic', _('Fill')).setRange(0).setLabel(_("Bottom/Top thickness (mm)"), _("This controls the thickness of the bottom and top layers, the amount of solid layers put down is calculated by the layer thickness and this value.\nHaving this value a multiple of the layer thickness makes sense. And keep it near your wall thickness to make an evenly strong part."))
setting('fill_density', 20, float, 'basic', _('Fill')).setRange(0, 100).setLabel(_("Fill Density (%)"), _("This controls how densely filled the insides of your print will be. For a solid part use 100%, for an empty part use 0%. A value around 20% is usually enough.\nThis won't affect the outside of the print and only adjusts how strong the part becomes."))
setting('nozzle_size', 0.4, float, 'advanced', _('Machine')).setRange(0.1,10).setLabel(_("Nozzle size (mm)"), _("The nozzle size is very important, this is used to calculate the line width of the infill, and used to calculate the amount of outside wall lines and thickness for the wall thickness you entered in the print settings."))
setting('retraction_dual_amount', 16.5, float, 'advanced', _('Retraction')).setRange(0).setLabel(_("Dual extrusion switch amount (mm)"), _("Amount of retraction when switching nozzle with dual-extrusion, set at 0 for no retraction at all. A value of 16.0mm seems to generate good results."))
setting('retraction_min_travel', 1.5, float, 'expert', _('Retraction')).setRange(0).setLabel(_("Minimum travel (mm)"), _("Minimum amount of travel needed for a retraction to happen at all. To make sure you do not get a lot of retractions in a small area."))
setting('retraction_combing', True, bool, 'expert', _('Retraction')).setLabel(_("Enable combing"), _("Combing is the act of avoiding holes in the print for the head to travel over. If combing is disabled the printer head moves straight from the start point to the end point and it will always retract."))
-setting('retraction_minimal_extrusion',0.1, float,'expert', _('Retraction')).setRange(0).setLabel(_("Minimal extrusion before retracting (mm)"), _("The minimal amount of extrusion that needs to be done before retracting again if a retraction needs to happen before this minimal is reached the retraction is ignored.\nThis avoids retraction a lot on the same piece of filament which flattens the filament and causes grinding issues."))
+setting('retraction_minimal_extrusion',0.02, float,'expert', _('Retraction')).setRange(0).setLabel(_("Minimal extrusion before retracting (mm)"), _("The minimal amount of extrusion that needs to be done before retracting again if a retraction needs to happen before this minimal is reached the retraction is ignored.\nThis avoids retraction a lot on the same piece of filament which flattens the filament and causes grinding issues."))
setting('bottom_thickness', 0.3, float, 'advanced', _('Quality')).setRange(0).setLabel(_("Initial layer thickness (mm)"), _("Layer thickness of the bottom layer. A thicker bottom layer makes sticking to the bed easier. Set to 0.0 to have the bottom layer thickness the same as the other layers."))
setting('object_sink', 0.0, float, 'advanced', _('Quality')).setLabel(_("Cut off object bottom (mm)"), _("Sinks the object into the platform, this can be used for objects that do not have a flat bottom and thus create a too small first layer."))
#setting('enable_skin', False, bool, 'advanced', _('Quality')).setLabel(_("Duplicate outlines"), _("Skin prints the outer lines of the prints twice, each time with half the thickness. This gives the illusion of a higher print quality."))
setting('solid_top', True, bool, 'expert', _('Infill')).setLabel(_("Solid infill top"), _("Create a solid top surface, if set to false the top is filled with the fill percentage. Useful for cups/vases."))
setting('solid_bottom', True, bool, 'expert', _('Infill')).setLabel(_("Solid infill bottom"), _("Create a solid bottom surface, if set to false the bottom is filled with the fill percentage. Useful for buildings."))
setting('fill_overlap', 15, int, 'expert', _('Infill')).setRange(0,100).setLabel(_("Infill overlap (%)"), _("Amount of overlap between the infill and the walls. There is a slight overlap with the walls and the infill so the walls connect firmly to the infill."))
+setting('support_angle', 60, float, 'expert', _('Support')).setRange(0,90).setLabel(_("Overhang angle for support (deg)"), _("The minimal angle that overhangs need to have to get support. With 0deg being horizontal and 90deg being vertical."))
setting('support_fill_rate', 15, int, 'expert', _('Support')).setRange(0,100).setLabel(_("Fill amount (%)"), _("Amount of infill structure in the support material, less material gives weaker support which is easier to remove. 15% seems to be a good average."))
setting('support_xy_distance', 0.7, float, 'expert', _('Support')).setRange(0,10).setLabel(_("Distance X/Y (mm)"), _("Distance of the support material from the print, in the X/Y directions.\n0.7mm gives a nice distance from the print so the support does not stick to the print."))
setting('support_z_distance', 0.15, float, 'expert', _('Support')).setRange(0,10).setLabel(_("Distance Z (mm)"), _("Distance from the top/bottom of the support to the print. A small gap here makes it easier to remove the support but makes the print a bit uglier.\n0.15mm gives a good seperation of the support material."))
""", str, 'alteration', 'alteration')
setting('startMode', 'Simple', ['Simple', 'Normal'], 'preference', 'hidden')
+setting('oneAtATime', 'True', bool, 'preference', 'hidden')
setting('lastFile', os.path.normpath(os.path.join(os.path.dirname(os.path.abspath(__file__)), '..', 'resources', 'example', 'UltimakerRobot_support.stl')), str, 'preference', 'hidden')
setting('save_profile', 'False', bool, 'preference', 'hidden').setLabel(_("Save profile on slice"), _("When slicing save the profile as [stl_file]_profile.ini next to the model."))
setting('filament_cost_kg', '0', float, 'preference', 'hidden').setLabel(_("Cost (price/kg)"), _("Cost of your filament per kg, to estimate the cost of the final print."))
setting('language', 'English', str, 'preference', 'hidden').setLabel(_('Language'), _('Change the language in which Cura runs. Switching language requires a restart of Cura'))
setting('active_machine', '0', int, 'preference', 'hidden')
-setting('model_colour', '#FFC924', str, 'preference', 'hidden').setLabel(_('Model colour'))
-setting('model_colour2', '#CB3030', str, 'preference', 'hidden').setLabel(_('Model colour (2)'))
-setting('model_colour3', '#DDD93C', str, 'preference', 'hidden').setLabel(_('Model colour (3)'))
-setting('model_colour4', '#4550D3', str, 'preference', 'hidden').setLabel(_('Model colour (4)'))
+setting('model_colour', '#FFC924', str, 'preference', 'hidden').setLabel(_('Model colour'), _('Display color for first extruder'))
+setting('model_colour2', '#CB3030', str, 'preference', 'hidden').setLabel(_('Model colour (2)'), _('Display color for second extruder'))
+setting('model_colour3', '#DDD93C', str, 'preference', 'hidden').setLabel(_('Model colour (3)'), _('Display color for third extruder'))
+setting('model_colour4', '#4550D3', str, 'preference', 'hidden').setLabel(_('Model colour (4)'), _('Display color for forth extruder'))
setting('window_maximized', 'True', bool, 'preference', 'hidden')
setting('window_pos_x', '-1', float, 'preference', 'hidden')
setting('machine_depth', '205', float, 'machine', 'hidden').setLabel(_("Maximum depth (mm)"), _("Size of the machine in mm"))
setting('machine_height', '200', float, 'machine', 'hidden').setLabel(_("Maximum height (mm)"), _("Size of the machine in mm"))
setting('machine_center_is_zero', 'False', bool, 'machine', 'hidden').setLabel(_("Machine center 0,0"), _("Machines firmware defines the center of the bed as 0,0 instead of the front left corner."))
+setting('machine_shape', 'Square', ['Square','Circular'], 'machine', 'hidden').setLabel(_("Build area shape"), _("The shape of machine build area."))
setting('ultimaker_extruder_upgrade', 'False', bool, 'machine', 'hidden')
setting('has_heated_bed', 'False', bool, 'machine', 'hidden').setLabel(_("Heated bed"), _("If you have an heated bed, this enabled heated bed settings (requires restart)"))
setting('gcode_flavor', 'RepRap (Marlin/Sprinter)', ['RepRap (Marlin/Sprinter)', 'UltiGCode', 'MakerBot'], 'machine', 'hidden').setLabel(_("GCode Flavor"), _("Flavor of generated GCode.\nRepRap is normal 5D GCode which works on Marlin/Sprinter based firmwares.\nUltiGCode is a variation of the RepRap GCode which puts more settings in the machine instead of the slicer.\nMakerBot GCode has a few changes in the way GCode is generated, but still requires MakerWare to generate to X3G."))
setting('extruder_amount', '1', ['1','2','3','4'], 'machine', 'hidden').setLabel(_("Extruder count"), _("Amount of extruders in your machine."))
setting('extruder_offset_x1', '0.0', float, 'machine', 'hidden').setLabel(_("Offset X"), _("The offset of your secondary extruder compared to the primary."))
-setting('extruder_offset_y1', '-21.6', float, 'machine', 'hidden').setLabel(_("Offset Y"), _("The offset of your secondary extruder compared to the primary."))
+setting('extruder_offset_y1', '21.6', float, 'machine', 'hidden').setLabel(_("Offset Y"), _("The offset of your secondary extruder compared to the primary."))
setting('extruder_offset_x2', '0.0', float, 'machine', 'hidden').setLabel(_("Offset X"), _("The offset of your tertiary extruder compared to the primary."))
setting('extruder_offset_y2', '0.0', float, 'machine', 'hidden').setLabel(_("Offset Y"), _("The offset of your tertiary extruder compared to the primary."))
setting('extruder_offset_x3', '0.0', float, 'machine', 'hidden').setLabel(_("Offset X"), _("The offset of your forth extruder compared to the primary."))
def getMachineSizePolygons():
size = numpy.array([getMachineSettingFloat('machine_width'), getMachineSettingFloat('machine_depth'), getMachineSettingFloat('machine_height')], numpy.float32)
ret = []
- ret.append(numpy.array([[-size[0]/2,-size[1]/2],[ size[0]/2,-size[1]/2],[ size[0]/2, size[1]/2], [-size[0]/2, size[1]/2]], numpy.float32))
-
- # Circle platform for delta printers...
- # circle = []
- # steps = 16
- # for n in xrange(0, steps):
- # circle.append([math.cos(float(n)/steps*2*math.pi) * size[0]/2, math.sin(float(n)/steps*2*math.pi) * size[0]/2])
- # ret.append(numpy.array(circle, numpy.float32))
+ if getMachineSetting('machine_shape') == 'Circular':
+ # Circle platform for delta printers...
+ circle = []
+ steps = 32
+ for n in xrange(0, steps):
+ circle.append([math.cos(float(n)/steps*2*math.pi) * size[0]/2, math.sin(float(n)/steps*2*math.pi) * size[1]/2])
+ ret.append(numpy.array(circle, numpy.float32))
+ else:
+ ret.append(numpy.array([[-size[0]/2,-size[1]/2],[size[0]/2,-size[1]/2],[size[0]/2, size[1]/2], [-size[0]/2, size[1]/2]], numpy.float32))
if getMachineSetting('machine_type') == 'ultimaker2':
#UM2 no-go zones
~ianmdlvl / cura.git / blobdiff