Update code for translations, fix a few translation issues and add a few missing...

[cura.git] / Cura / resources / locale / en / LC_MESSAGES / Cura.po

diff --git a/Cura/resources/locale/en/LC_MESSAGES/Cura.po b/Cura/resources/locale/en/LC_MESSAGES/Cura.po
index e15391c43be05a339fa069733edfa3789a2adbf0..d9ad0b15c27dda063fe6580753e96e201dde30f6 100644 (file)
--- a/Cura/resources/locale/en/LC_MESSAGES/Cura.po
+++ b/Cura/resources/locale/en/LC_MESSAGES/Cura.po
@@ -1,2088 +1,2157 @@
-# SOME DESCRIPTIVE TITLE.
-# Copyright (C) 2013
-# This file is distributed under the same license as the Cura package.
-# Ilya Kulakov <kulakov.ilya@gmail.com>, 2013.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: Cura\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2013-09-27 09:25+0200\n"
-"PO-Revision-Date: 2013-09-27 09:41+0100\n"
-"Last-Translator: \n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Poedit 1.5.7\n"
-
-#: Cura/gui/app.py:86 Cura/gui/mainWindow.py:520
-msgid "A new version of Cura is available, would you like to download?"
-msgstr ""
-
-#: Cura/gui/app.py:86 Cura/gui/mainWindow.py:520
-msgid "New version available"
-msgstr ""
-
-#: Cura/gui/configWizard.py:220
-msgid "Add new machine wizard"
-msgstr ""
-
-#: Cura/gui/configWizard.py:222
-msgid "First time run wizard"
-msgstr ""
-
-#: Cura/gui/configWizard.py:223
-msgid "Welcome, and thanks for trying Cura!"
-msgstr ""
-
-#: Cura/gui/configWizard.py:225
-msgid "This wizard will help you with the following steps:"
-msgstr ""
-
-#: Cura/gui/configWizard.py:226
-msgid "* Configure Cura for your machine"
-msgstr ""
-
-#: Cura/gui/configWizard.py:227
-msgid "* Optionally upgrade your firmware"
-msgstr ""
-
-#: Cura/gui/configWizard.py:228
-msgid "* Optionally check if your machine is working safely"
-msgstr ""
-
-#: Cura/gui/configWizard.py:229
-msgid "* Optionally level your printer bed"
-msgstr ""
-
-#: Cura/gui/configWizard.py:239
-msgid ""
-"RepRap machines are vastly different, and there is no\n"
-"default configuration in Cura for any of them."
-msgstr ""
-
-#: Cura/gui/configWizard.py:240
-msgid ""
-"If you like a default profile for your machine added,\n"
-"then make an issue on github."
-msgstr ""
-
-#: Cura/gui/configWizard.py:242
-msgid "You will have to manually install Marlin or Sprinter firmware."
-msgstr ""
-
-#: Cura/gui/configWizard.py:244
-msgid "Machine name"
-msgstr ""
-
-#: Cura/gui/configWizard.py:245
-msgid "Machine width (mm)"
-msgstr ""
-
-#: Cura/gui/configWizard.py:246
-msgid "Machine depth (mm)"
-msgstr ""
-
-#: Cura/gui/configWizard.py:247
-msgid "Machine height (mm)"
-msgstr ""
-
-#: Cura/gui/configWizard.py:248 Cura/util/profile.py:158
-msgid "Nozzle size (mm)"
-msgstr ""
-
-#: Cura/gui/configWizard.py:249 Cura/util/profile.py:367
-msgid "Heated bed"
-msgstr ""
-
-#: Cura/gui/configWizard.py:250
-msgid "Bed center is 0,0,0 (RoStock)"
-msgstr ""
-
-#: Cura/gui/configWizard.py:270
-msgid "Select your machine"
-msgstr ""
-
-#: Cura/gui/configWizard.py:271
-msgid "What kind of machine do you have:"
-msgstr ""
-
-#: Cura/gui/configWizard.py:278
-msgid "Other (Ex: RepRap)"
-msgstr ""
-
-#: Cura/gui/configWizard.py:281
-msgid ""
-"The collection of anonymous usage information helps with the continued "
-"improvement of Cura."
-msgstr ""
-
-#: Cura/gui/configWizard.py:282
-msgid ""
-"This does NOT submit your models online nor gathers any privacy related "
-"information."
-msgstr ""
-
-#: Cura/gui/configWizard.py:283
-msgid "Submit anonymous usage information:"
-msgstr ""
-
-#: Cura/gui/configWizard.py:284
-msgid "For full details see: http://wiki.ultimaker.com/Cura:stats"
-msgstr ""
-
-#: Cura/gui/configWizard.py:346
-msgid "Select upgraded parts you have"
-msgstr ""
-
-#: Cura/gui/configWizard.py:347
-msgid ""
-"To assist you in having better default settings for your Ultimaker\n"
-"Cura would like to know which upgrades you have in your machine."
-msgstr ""
-
-#: Cura/gui/configWizard.py:349
-msgid "Extruder drive upgrade"
-msgstr ""
-
-#: Cura/gui/configWizard.py:350
-msgid "Heated printer bed (self built)"
-msgstr ""
-
-#: Cura/gui/configWizard.py:351
-msgid "Dual extrusion (experimental)"
-msgstr ""
-
-#: Cura/gui/configWizard.py:353
-msgid ""
-"If you have an Ultimaker bought after october 2012 you will have the\n"
-"Extruder drive upgrade. If you do not have this upgrade,\n"
-"it is highly recommended to improve reliability."
-msgstr ""
-
-#: Cura/gui/configWizard.py:354
-msgid ""
-"This upgrade can be bought from the Ultimaker webshop\n"
-"or found on thingiverse as thing:26094"
-msgstr ""
-
-#: Cura/gui/configWizard.py:373
-msgid "Upgrade Ultimaker Firmware"
-msgstr ""
-
-#: Cura/gui/configWizard.py:374
-msgid ""
-"Firmware is the piece of software running directly on your 3D printer.\n"
-"This firmware controls the step motors, regulates the temperature\n"
-"and ultimately makes your printer work."
-msgstr ""
-
-#: Cura/gui/configWizard.py:376
-msgid ""
-"The firmware shipping with new Ultimakers works, but upgrades\n"
-"have been made to make better prints, and make calibration easier."
-msgstr ""
-
-#: Cura/gui/configWizard.py:378
-msgid ""
-"Cura requires these new features and thus\n"
-"your firmware will most likely need to be upgraded.\n"
-"You will get the chance to do so now."
-msgstr ""
-
-#: Cura/gui/configWizard.py:383
-msgid "Do not upgrade to this firmware if:"
-msgstr ""
-
-#: Cura/gui/configWizard.py:384
-msgid "* You have an older machine based on ATMega1280"
-msgstr ""
-
-#: Cura/gui/configWizard.py:385
-msgid "* Have other changes in the firmware"
-msgstr ""
-
-#: Cura/gui/configWizard.py:419
-msgid ""
-"It is a good idea to do a few sanity checks now on your Ultimaker.\n"
-"You can skip these if you know your machine is functional."
-msgstr ""
-
-#: Cura/gui/configWizard.py:420
-msgid "Run checks"
-msgstr ""
-
-#: Cura/gui/configWizard.py:420
-msgid "Skip checks"
-msgstr ""
-
-#: Cura/gui/configWizard.py:424
-msgid "Communication:"
-msgstr ""
-
-#: Cura/gui/configWizard.py:425
-msgid "Temperature:"
-msgstr ""
-
-#: Cura/gui/configWizard.py:426
-msgid "Endstops:"
-msgstr ""
-
-#: Cura/gui/configWizard.py:431
-msgid "Show error log"
-msgstr ""
-
-#: Cura/gui/configWizard.py:465
-msgid "Connecting to machine."
-msgstr ""
-
-#: Cura/gui/configWizard.py:486
-msgid "Cooldown before temperature check."
-msgstr ""
-
-#: Cura/gui/configWizard.py:492 Cura/gui/configWizard.py:499
-msgid "Checking the heater and temperature sensor."
-msgstr ""
-
-#: Cura/gui/configWizard.py:510
-msgid "Please make sure none of the endstops are pressed."
-msgstr ""
-
-#: Cura/gui/configWizard.py:523
-msgid "Temperature measurement FAILED!"
-msgstr ""
-
-#: Cura/gui/configWizard.py:528
-#, python-format
-msgid "Head temperature: %d"
-msgstr ""
-
-#: Cura/gui/configWizard.py:535 Cura/gui/configWizard.py:544
-#, python-format
-msgid "Communication State: %s"
-msgstr ""
-
-#: Cura/gui/configWizard.py:538
-msgid "Failed to establish connection with the printer."
-msgstr ""
-
-#: Cura/gui/configWizard.py:583
-msgid "Please press the right X endstop."
-msgstr ""
-
-#: Cura/gui/configWizard.py:588
-msgid "Please press the left X endstop."
-msgstr ""
-
-#: Cura/gui/configWizard.py:593
-msgid "Please press the front Y endstop."
-msgstr ""
-
-#: Cura/gui/configWizard.py:598
-msgid "Please press the back Y endstop."
-msgstr ""
-
-#: Cura/gui/configWizard.py:603
-msgid "Please press the top Z endstop."
-msgstr ""
-
-#: Cura/gui/configWizard.py:608
-msgid "Please press the bottom Z endstop."
-msgstr ""
-
-#: Cura/gui/configWizard.py:614
-msgid "Checkup finished"
-msgstr ""
-
-#: Cura/gui/configWizard.py:657
-msgid "Calibrating the Steps Per E requires some manual actions."
-msgstr ""
-
-#: Cura/gui/configWizard.py:658
-msgid "First remove any filament from your machine."
-msgstr ""
-
-#: Cura/gui/configWizard.py:659
-msgid ""
-"Next put in your filament so the tip is aligned with the\n"
-"top of the extruder drive."
-msgstr ""
-
-#: Cura/gui/configWizard.py:660
-msgid "We'll push the filament 100mm"
-msgstr ""
-
-#: Cura/gui/configWizard.py:661
-msgid "Extrude 100mm filament"
-msgstr ""
-
-#: Cura/gui/configWizard.py:662
-msgid ""
-"Now measure the amount of extruded filament:\n"
-"(this can be more or less then 100mm)"
-msgstr ""
-
-#: Cura/gui/configWizard.py:663
-msgid "Save"
-msgstr ""
-
-#: Cura/gui/configWizard.py:664
-msgid "This results in the following steps per E:"
-msgstr ""
-
-#: Cura/gui/configWizard.py:666
-msgid "You can repeat these steps to get better calibration."
-msgstr ""
-
-#: Cura/gui/configWizard.py:669
-msgid ""
-"If you still have filament in your printer which needs\n"
-"heat to remove, press the heat up button below:"
-msgstr ""
-
-#: Cura/gui/configWizard.py:670
-msgid "Heatup for filament removal"
-msgstr ""
-
-#: Cura/gui/configWizard.py:693 Cura/gui/configWizard.py:725
-msgid ""
-"Error: Failed to open serial port to machine\n"
-"If this keeps happening, try disconnecting and reconnecting the USB cable"
-msgstr ""
-
-#: Cura/gui/firmwareInstall.py:39
-msgid ""
-"I am sorry, but Cura does not ship with a default firmware for your machine "
-"configuration."
-msgstr ""
-
-#: Cura/gui/firmwareInstall.py:39 Cura/gui/firmwareInstall.py:98
-#: Cura/gui/mainWindow.py:455
-msgid "Firmware update"
-msgstr ""
-
-#: Cura/gui/firmwareInstall.py:49
-msgid "OK"
-msgstr ""
-
-#: Cura/gui/firmwareInstall.py:68
-msgid "Reading firmware..."
-msgstr ""
-
-#: Cura/gui/firmwareInstall.py:70
-msgid "Connecting to machine..."
-msgstr ""
-
-#: Cura/gui/firmwareInstall.py:87
-msgid "Uploading firmware..."
-msgstr ""
-
-#: Cura/gui/firmwareInstall.py:90
-#, python-format
-msgid ""
-"Done!\n"
-"Installed firmware: %s"
-msgstr ""
-
-#: Cura/gui/firmwareInstall.py:92
-msgid "Failed to write firmware.\n"
-msgstr ""
-
-#: Cura/gui/firmwareInstall.py:97
-msgid ""
-"Failed to find machine for firmware upgrade\n"
-"Is your machine connected to the PC?"
-msgstr ""
-
-#: Cura/gui/mainWindow.py:54
-msgid "Load model file...\tCTRL+L"
-msgstr ""
-
-#: Cura/gui/mainWindow.py:56
-msgid "Save model...\tCTRL+S"
-msgstr ""
-
-#: Cura/gui/mainWindow.py:58
-msgid "Clear platform"
-msgstr ""
-
-#: Cura/gui/mainWindow.py:62
-msgid "Print...\tCTRL+P"
-msgstr ""
-
-#: Cura/gui/mainWindow.py:64 Cura/gui/sceneView.py:214
-msgid "Save GCode..."
-msgstr ""
-
-#: Cura/gui/mainWindow.py:66
-msgid "Show slice engine log..."
-msgstr ""
-
-#: Cura/gui/mainWindow.py:70
-msgid "Open Profile..."
-msgstr ""
-
-#: Cura/gui/mainWindow.py:73
-msgid "Save Profile..."
-msgstr ""
-
-#: Cura/gui/mainWindow.py:76
-msgid "Load Profile from GCode..."
-msgstr ""
-
-#: Cura/gui/mainWindow.py:80
-msgid "Reset Profile to default"
-msgstr ""
-
-#: Cura/gui/mainWindow.py:85
-msgid "Preferences...\tCTRL+,"
-msgstr ""
-
-#: Cura/gui/mainWindow.py:87
-msgid "Machine settings..."
-msgstr ""
-
-#: Cura/gui/mainWindow.py:93
-msgid "&Recent Model Files"
-msgstr ""
-
-#: Cura/gui/mainWindow.py:100
-msgid "&Recent Profile Files"
-msgstr ""
-
-#: Cura/gui/mainWindow.py:106
-msgid "Quit"
-msgstr ""
-
-#: Cura/gui/mainWindow.py:108
-msgid "&File"
-msgstr ""
-
-#: Cura/gui/mainWindow.py:112
-msgid "Switch to quickprint..."
-msgstr ""
-
-#: Cura/gui/mainWindow.py:116
-msgid "Switch to full settings..."
-msgstr ""
-
-#: Cura/gui/mainWindow.py:126
-msgid "Minecraft import..."
-msgstr ""
-
-#: Cura/gui/mainWindow.py:130
-msgid "PID Debugger..."
-msgstr ""
-
-#: Cura/gui/mainWindow.py:133
-msgid "Copy profile to clipboard"
-msgstr ""
-
-#: Cura/gui/mainWindow.py:135
-msgid "Tools"
-msgstr ""
-
-#: Cura/gui/mainWindow.py:141 Cura/util/profile.py:158
-msgid "Machine"
-msgstr ""
-
-#: Cura/gui/mainWindow.py:144
-msgid "Open expert settings..."
-msgstr ""
-
-#: Cura/gui/mainWindow.py:148
-msgid "Run first run wizard..."
-msgstr ""
-
-#: Cura/gui/mainWindow.py:150
-msgid "Run bed leveling wizard..."
-msgstr ""
-
-#: Cura/gui/mainWindow.py:153
-msgid "Run head offset wizard..."
-msgstr ""
-
-#: Cura/gui/mainWindow.py:156
-msgid "Expert"
-msgstr ""
-
-#: Cura/gui/mainWindow.py:159
-msgid "Online documentation..."
-msgstr ""
-
-#: Cura/gui/mainWindow.py:161
-msgid "Report a problem..."
-msgstr ""
-
-#: Cura/gui/mainWindow.py:163
-msgid "Check for update..."
-msgstr ""
-
-#: Cura/gui/mainWindow.py:165
-msgid "Open YouMagine website..."
-msgstr ""
-
-#: Cura/gui/mainWindow.py:167
-msgid "About Cura..."
-msgstr ""
-
-#: Cura/gui/mainWindow.py:169
-msgid "Help"
-msgstr ""
-
-#: Cura/gui/mainWindow.py:387
-msgid "Add new machine..."
-msgstr ""
-
-#: Cura/gui/mainWindow.py:392
-msgid "Install custom firmware"
-msgstr ""
-
-#: Cura/gui/mainWindow.py:394
-msgid "Install default Marlin firmware"
-msgstr ""
-
-#: Cura/gui/mainWindow.py:398
-msgid "Select profile file to load"
-msgstr ""
-
-#: Cura/gui/mainWindow.py:410
-msgid "Select gcode file to load profile from"
-msgstr ""
-
-#: Cura/gui/mainWindow.py:423
-msgid ""
-"No profile found in GCode file.\n"
-"This feature only works with GCode files made by Cura 12.07 or newer."
-msgstr ""
-
-#: Cura/gui/mainWindow.py:423
-msgid "Profile load error"
-msgstr ""
-
-#: Cura/gui/mainWindow.py:427
-msgid "Select profile file to save"
-msgstr ""
-
-#: Cura/gui/mainWindow.py:435
-msgid ""
-"This will reset all profile settings to defaults.\n"
-"Unless you have saved your current profile, all settings will be lost!\n"
-"Do you really want to reset?"
-msgstr ""
-
-#: Cura/gui/mainWindow.py:435
-msgid "Profile reset"
-msgstr ""
-
-#: Cura/gui/mainWindow.py:455
-msgid ""
-"Warning: Installing a custom firmware does not guarantee that you machine "
-"will function correctly, and could damage your machine."
-msgstr ""
-
-#: Cura/gui/mainWindow.py:456
-msgid "Open firmware to upload"
-msgstr ""
-
-#: Cura/gui/mainWindow.py:523
-msgid "You are running the latest version of Cura!"
-msgstr ""
-
-#: Cura/gui/mainWindow.py:523
-msgid "Awesome!"
-msgstr ""
-
-#: Cura/gui/mainWindow.py:535
-msgid "Copyright (C) David Braam"
-msgstr ""
-
-#: Cura/gui/mainWindow.py:601
-msgid "Plugins"
-msgstr ""
-
-#: Cura/gui/pluginPanel.py:26
-msgid "Plugins:"
-msgstr ""
-
-#: Cura/gui/pluginPanel.py:30
-msgid "Open plugin location"
-msgstr ""
-
-#: Cura/gui/pluginPanel.py:31
-msgid "Enabled plugins"
-msgstr ""
-
-#: Cura/gui/pluginPanel.py:133
-msgid "You need to select a plugin before you can add anything."
-msgstr ""
-
-#: Cura/gui/pluginPanel.py:133
-msgid "Error: no plugin selected"
-msgstr ""
-
-#: Cura/gui/preferencesDialog.py:24
-msgid "Colours"
-msgstr ""
-
-#: Cura/gui/preferencesDialog.py:29
-msgid "Filament settings"
-msgstr ""
-
-#: Cura/gui/preferencesDialog.py:39
-msgid "Cura settings"
-msgstr ""
-
-#: Cura/gui/preferencesDialog.py:73
-msgid "Machine settings"
-msgstr ""
-
-#: Cura/gui/preferencesDialog.py:82
-msgid "Printer head size"
-msgstr ""
-
-#: Cura/gui/preferencesDialog.py:90
-#, python-format
-msgid "Extruder %d"
-msgstr ""
-
-#: Cura/gui/preferencesDialog.py:94
-msgid "Communication settings"
-msgstr ""
-
-#: Cura/gui/preferencesDialog.py:137
-msgid "Cannot remove the last machine configuration in Cura"
-msgstr ""
-
-#: Cura/gui/preferencesDialog.py:137
-msgid "Machine remove error"
-msgstr ""
-
-#: Cura/gui/printWindow.py:129
-msgid "Printing"
-msgstr ""
-
-#: Cura/gui/printWindow.py:158
-msgid "Statistics"
-msgstr ""
-
-#: Cura/gui/printWindow.py:163
-msgid ""
-"Your computer is running on battery power.\n"
-"Connect your computer to AC power or your print might not finish."
-msgstr ""
-
-#: Cura/gui/printWindow.py:174
-msgid ""
-"Filament: ####.##m #.##g\n"
-"Estimated print time: #####:##\n"
-"Machine state:\n"
-"Detecting baudrateXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX"
-msgstr ""
-
-#: Cura/gui/printWindow.py:179
-msgid "Connect"
-msgstr ""
-
-#: Cura/gui/printWindow.py:181 Cura/gui/sceneView.py:64
-#: Cura/gui/sceneView.py:774
-msgid "Print"
-msgstr ""
-
-#: Cura/gui/printWindow.py:182 Cura/gui/printWindow.py:419
-msgid "Pause"
-msgstr ""
-
-#: Cura/gui/printWindow.py:183
-msgid "Cancel print"
-msgstr ""
-
-#: Cura/gui/printWindow.py:184
-msgid "Error log"
-msgstr ""
-
-#: Cura/gui/printWindow.py:205
-msgid "BedTemp:"
-msgstr ""
-
-#: Cura/gui/printWindow.py:213
-msgid "Temp:"
-msgstr ""
-
-#: Cura/gui/printWindow.py:261
-msgid "Jog"
-msgstr ""
-
-#: Cura/gui/printWindow.py:276
-msgid "Outer wall:"
-msgstr ""
-
-#: Cura/gui/printWindow.py:279
-msgid "Inner wall:"
-msgstr ""
-
-#: Cura/gui/printWindow.py:282
-msgid "Fill:"
-msgstr ""
-
-#: Cura/gui/printWindow.py:285
-msgid "Support:"
-msgstr ""
-
-#: Cura/gui/printWindow.py:289 Cura/util/profile.py:183
-#: Cura/util/profile.py:184 Cura/util/profile.py:185
-msgid "Speed"
-msgstr ""
-
-#: Cura/gui/printWindow.py:307
-msgid "Term"
-msgstr ""
-
-#: Cura/gui/printWindow.py:314
-msgid "Enable timelapse movie recording"
-msgstr ""
-
-#: Cura/gui/printWindow.py:328
-msgid "Show preview"
-msgstr ""
-
-#: Cura/gui/printWindow.py:334
-msgid "Camera"
-msgstr ""
-
-#: Cura/gui/printWindow.py:417
-msgid "Resume"
-msgstr ""
-
-#: Cura/gui/printWindow.py:434
-msgid "Loading gcode...\n"
-msgstr ""
-
-#: Cura/gui/printWindow.py:436
-#, python-format
-msgid "Filament: %(amount).2fm %(weight).2fg\n"
-msgstr ""
-
-#: Cura/gui/printWindow.py:439
-#, python-format
-msgid "Filament cost: %s\n"
-msgstr ""
-
-#: Cura/gui/sceneView.py:63
-msgid "Load"
-msgstr ""
-
-#: Cura/gui/sceneView.py:68
-msgid "Rotate"
-msgstr ""
-
-#: Cura/gui/sceneView.py:69
-msgid "Scale"
-msgstr ""
-
-#: Cura/gui/sceneView.py:70
-msgid "Mirror"
-msgstr ""
-
-#: Cura/gui/sceneView.py:72 Cura/gui/sceneView.py:75
-msgid "Reset"
-msgstr ""
-
-#: Cura/gui/sceneView.py:73
-msgid "Lay flat"
-msgstr ""
-
-#: Cura/gui/sceneView.py:76
-msgid "To max"
-msgstr ""
-
-#: Cura/gui/sceneView.py:78
-msgid "Mirror X"
-msgstr ""
-
-#: Cura/gui/sceneView.py:79
-msgid "Mirror Y"
-msgstr ""
-
-#: Cura/gui/sceneView.py:80
-msgid "Mirror Z"
-msgstr ""
-
-#: Cura/gui/sceneView.py:88
-msgid "Scale X"
-msgstr ""
-
-#: Cura/gui/sceneView.py:90
-msgid "Scale Y"
-msgstr ""
-
-#: Cura/gui/sceneView.py:92
-msgid "Scale Z"
-msgstr ""
-
-#: Cura/gui/sceneView.py:94
-msgid "Size X (mm)"
-msgstr ""
-
-#: Cura/gui/sceneView.py:96
-msgid "Size Y (mm)"
-msgstr ""
-
-#: Cura/gui/sceneView.py:98
-msgid "Size Z (mm)"
-msgstr ""
-
-#: Cura/gui/sceneView.py:100
-msgid "Uniform scale"
-msgstr ""
-
-#: Cura/gui/sceneView.py:103
-msgid "View mode"
-msgstr ""
-
-#: Cura/gui/sceneView.py:103
-msgid "Normal"
-msgstr ""
-
-#: Cura/gui/sceneView.py:103
-msgid "Overhang"
-msgstr ""
-
-#: Cura/gui/sceneView.py:103
-msgid "Transparent"
-msgstr ""
-
-#: Cura/gui/sceneView.py:103
-msgid "X-Ray"
-msgstr ""
-
-#: Cura/gui/sceneView.py:103
-msgid "Layers"
-msgstr ""
-
-#: Cura/gui/sceneView.py:106
-msgid "Share on YouMagine"
-msgstr ""
-
-#: Cura/gui/sceneView.py:168
-msgid "Open 3D model"
-msgstr ""
-
-#: Cura/gui/sceneView.py:183
-msgid "Save 3D model"
-msgstr ""
-
-#: Cura/gui/sceneView.py:213
-msgid "Print with USB"
-msgstr ""
-
-#: Cura/gui/sceneView.py:215
-msgid "Slice engine log..."
-msgstr ""
-
-#: Cura/gui/sceneView.py:229 Cura/gui/sceneView.py:780
-msgid "Save toolpath"
-msgstr ""
-
-#: Cura/gui/sceneView.py:266
-msgid "The slicing engine reported the following"
-msgstr ""
-
-#: Cura/gui/sceneView.py:266
-msgid "Engine log..."
-msgstr ""
-
-#: Cura/gui/sceneView.py:645
-msgid "Delete object"
-msgstr ""
-
-#: Cura/gui/sceneView.py:646
-msgid "Center on platform"
-msgstr ""
-
-#: Cura/gui/sceneView.py:647
-msgid "Multiply object"
-msgstr ""
-
-#: Cura/gui/sceneView.py:648
-msgid "Split object into parts"
-msgstr ""
-
-#: Cura/gui/sceneView.py:650
-msgid "Dual extrusion merge"
-msgstr ""
-
-#: Cura/gui/sceneView.py:652
-msgid "Delete all objects"
-msgstr ""
-
-#: Cura/gui/sceneView.py:777
-msgid "Toolpath to SD"
-msgstr ""
-
-#: Cura/gui/sceneView.py:1087
-msgid "Loading toolpath for visualization..."
-msgstr ""
-
-#: Cura/gui/sceneView.py:1138
-msgid "Overhang view not working due to lack of OpenGL shaders support."
-msgstr ""
-
-#: Cura/gui/simpleMode.py:20
-msgid "High quality print"
-msgstr ""
-
-#: Cura/gui/simpleMode.py:21
-msgid "Normal quality print"
-msgstr ""
-
-#: Cura/gui/simpleMode.py:22
-msgid "Fast low quality print"
-msgstr ""
-
-#: Cura/gui/simpleMode.py:23
-msgid "Thin walled cup or vase"
-msgstr ""
-
-#: Cura/gui/simpleMode.py:33
-msgid "Print support structure"
-msgstr ""
-
-#: Cura/gui/simpleMode.py:38
-msgid "Select a print type:"
-msgstr ""
-
-#: Cura/gui/simpleMode.py:48
-msgid "Material:"
-msgstr ""
-
-#: Cura/gui/simpleMode.py:52
-msgid "Diameter:"
-msgstr ""
-
-#: Cura/gui/simpleMode.py:58
-msgid "Other:"
-msgstr ""
-
-#: Cura/gui/simpleMode.py:119
-msgid "Exterior Only"
-msgstr ""
-
-#: Cura/gui/tools/batchRun.py:14
-msgid "Cura - Batch run"
-msgstr ""
-
-#: Cura/gui/tools/batchRun.py:29
-msgid "Add"
-msgstr ""
-
-#: Cura/gui/tools/batchRun.py:30
-msgid "Remove"
-msgstr ""
-
-#: Cura/gui/tools/batchRun.py:31
-msgid "Prepare all"
-msgstr ""
-
-#: Cura/gui/tools/batchRun.py:47
-msgid "Open file to batch prepare"
-msgstr ""
-
-#: Cura/gui/tools/batchRun.py:134
-#, python-format
-msgid "Building: %d                           "
-msgstr ""
-
-#: Cura/gui/tools/batchRun.py:137
-#, python-format
-msgid "Done: 0/%d                           "
-msgstr ""
-
-#: Cura/gui/tools/batchRun.py:140
-msgid "Abort"
-msgstr ""
-
-#: Cura/gui/tools/batchRun.py:163 Cura/gui/tools/batchRun.py:233
-msgid "Close"
-msgstr ""
-
-#: Cura/gui/tools/batchRun.py:187
-#, python-format
-msgid "Build: %d models"
-msgstr ""
-
-#: Cura/gui/tools/batchRun.py:188
-#, python-format
-msgid ""
-"\n"
-"Slicing took: %(hours)02d:%(minutes)02d"
-msgstr ""
-
-#: Cura/gui/tools/batchRun.py:198
-#, python-format
-msgid "Building: [%(index)d/%(size)d]"
-msgstr ""
-
-#: Cura/gui/tools/batchRun.py:214
-msgid "Aborted by user."
-msgstr ""
-
-#: Cura/gui/tools/batchRun.py:228
-#, python-format
-msgid "Done %(index)d/%(size)d"
-msgstr ""
-
-#: Cura/gui/tools/batchRun.py:236
-msgid "To SDCard"
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:79
-msgid "Checking token"
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:83
-msgid "Failed to contact YouMagine.com"
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:83 Cura/gui/tools/youmagineGui.py:116
-#: Cura/gui/tools/youmagineGui.py:133 Cura/gui/tools/youmagineGui.py:140
-#: Cura/gui/tools/youmagineGui.py:148 Cura/gui/tools/youmagineGui.py:153
-msgid "YouMagine error."
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:100
-msgid "Cura is now authorized to share on YouMagine"
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:100
-msgid "YouMagine."
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:112
-msgid "Creating new design on YouMagine..."
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:116
-msgid "Failed to create a design, nothing uploaded!"
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:120
-#, python-format
-msgid "Building model %s..."
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:131
-#, python-format
-msgid "Uploading model %s..."
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:133 Cura/gui/tools/youmagineGui.py:140
-#: Cura/gui/tools/youmagineGui.py:148
-#, python-format
-msgid "Failed to upload %s!"
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:137
-#, python-format
-msgid "Uploading file %s..."
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:145
-#, python-format
-msgid "Uploading image %s..."
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:153
-msgid "Failed to upload snapshot!"
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:158
-msgid "Publishing design..."
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:230
-msgid "Request authorization from YouMagine"
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:231
-msgid "Paste token here"
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:237
-msgid ""
-"To share your designs on YouMagine\n"
-"you need an account on YouMagine.com\n"
-"and authorize Cura to access your account."
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:239
-msgid ""
-"This will open a browser window where you can\n"
-"authorize Cura to access your YouMagine account.\n"
-"You can revoke access at any time\n"
-"from YouMagine.com"
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:274
-msgid "Design name"
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:278
-msgid "Publish after upload"
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:279
-msgid "Share!"
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:287
-msgid "Add..."
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:289
-msgid "Webcam..."
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:297
-msgid ""
-"Directly publish the design after uploading.\n"
-"Without this check the design will not be public\n"
-"until you publish it yourself on YouMagine.com"
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:303
-msgid "Design name:"
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:305
-msgid "Description:"
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:307
-msgid "Category:"
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:309
-msgid "License:"
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:312
-msgid "Images:"
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:315
-msgid "Related design files:"
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:338
-msgid "The name cannot be empty"
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:338 Cura/gui/tools/youmagineGui.py:342
-msgid "New design error."
-msgstr ""
-
-#: Cura/gui/tools/youmagineGui.py:342
-msgid "The description cannot be empty"
-msgstr ""
-
-#: Cura/gui/util/openglGui.py:239
-msgid "An error has occurred during the 3D view drawing."
-msgstr ""
-
-#: Cura/gui/util/openglGui.py:246
-msgid "3D window error"
-msgstr ""
-
-#: Cura/util/profile.py:153 Cura/util/profile.py:154 Cura/util/profile.py:155
-#: Cura/util/profile.py:179 Cura/util/profile.py:180 Cura/util/profile.py:182
-msgid "Quality"
-msgstr ""
-
-#: Cura/util/profile.py:153
-msgid "Layer height (mm)"
-msgstr ""
-
-#: Cura/util/profile.py:153
-msgid ""
-"Layer height in millimeters.\n"
-"This is the most important setting to determine the quality of your print. "
-"Normal quality prints are 0.1mm, high quality is 0.06mm. You can go up to "
-"0.25mm with an Ultimaker for very fast prints at low quality."
-msgstr ""
-
-#: Cura/util/profile.py:154
-msgid "Shell thickness (mm)"
-msgstr ""
-
-#: Cura/util/profile.py:154
-msgid ""
-"Thickness of the outside shell in the horizontal direction.\n"
-"This is used in combination with the nozzle size to define the number\n"
-"of perimeter lines and the thickness of those perimeter lines."
-msgstr ""
-
-#: Cura/util/profile.py:155
-msgid "Enable retraction"
-msgstr ""
-
-#: Cura/util/profile.py:155
-msgid ""
-"Retract the filament when the nozzle is moving over a none-printed area. "
-"Details about the retraction can be configured in the advanced tab."
-msgstr ""
-
-#: Cura/util/profile.py:156 Cura/util/profile.py:157
-msgid "Fill"
-msgstr ""
-
-#: Cura/util/profile.py:156
-msgid "Bottom/Top thickness (mm)"
-msgstr ""
-
-#: Cura/util/profile.py:156
-msgid ""
-"This controls the thickness of the bottom and top layers, the amount of "
-"solid layers put down is calculated by the layer thickness and this value.\n"
-"Having this value a multiple of the layer thickness makes sense. And keep it "
-"near your wall thickness to make an evenly strong part."
-msgstr ""
-
-#: Cura/util/profile.py:157
-msgid "Fill Density (%)"
-msgstr ""
-
-#: Cura/util/profile.py:157
-msgid ""
-"This controls how densely filled the insides of your print will be. For a "
-"solid part use 100%, for an empty part use 0%. A value around 20% is usually "
-"enough.\n"
-"This won't effect the outside of the print and only adjusts how strong the "
-"part becomes."
-msgstr ""
-
-#: Cura/util/profile.py:158
-msgid ""
-"The nozzle size is very important, this is used to calculate the line width "
-"of the infill, and used to calculate the amount of outside wall lines and "
-"thickness for the wall thickness you entered in the print settings."
-msgstr ""
-
-#: Cura/util/profile.py:159 Cura/util/profile.py:160 Cura/util/profile.py:161
-#: Cura/util/profile.py:162 Cura/util/profile.py:163 Cura/util/profile.py:164
-msgid "Speed & Temperature"
-msgstr ""
-
-#: Cura/util/profile.py:159
-msgid "Print speed (mm/s)"
-msgstr ""
-
-#: Cura/util/profile.py:159
-msgid ""
-"Speed at which printing happens. A well adjusted Ultimaker can reach 150mm/"
-"s, but for good quality prints you want to print slower. Printing speed "
-"depends on a lot of factors. So you will be experimenting with optimal "
-"settings for this."
-msgstr ""
-
-#: Cura/util/profile.py:160
-msgid "Printing temperature (C)"
-msgstr ""
-
-#: Cura/util/profile.py:160 Cura/util/profile.py:161 Cura/util/profile.py:162
-#: Cura/util/profile.py:163
-msgid ""
-"Temperature used for printing. Set at 0 to pre-heat yourself.\n"
-"For PLA a value of 210C is usually used.\n"
-"For ABS a value of 230C or higher is required."
-msgstr ""
-
-#: Cura/util/profile.py:161
-msgid "2nd nozzle temperature (C)"
-msgstr ""
-
-#: Cura/util/profile.py:162
-msgid "3th nozzle temperature (C)"
-msgstr ""
-
-#: Cura/util/profile.py:163
-msgid "4th nozzle temperature (C)"
-msgstr ""
-
-#: Cura/util/profile.py:164
-msgid "Bed temperature (C)"
-msgstr ""
-
-#: Cura/util/profile.py:164
-msgid ""
-"Temperature used for the heated printer bed. Set at 0 to pre-heat yourself."
-msgstr ""
-
-#: Cura/util/profile.py:165 Cura/util/profile.py:166 Cura/util/profile.py:167
-#: Cura/util/profile.py:206 Cura/util/profile.py:207 Cura/util/profile.py:208
-msgid "Support"
-msgstr ""
-
-#: Cura/util/profile.py:165
-msgid "Support type"
-msgstr ""
-
-#: Cura/util/profile.py:165
-msgid ""
-"Type of support structure build.\n"
-"\"Touching buildplate\" is the most commonly used support setting.\n"
-"\n"
-"None does not do any support.\n"
-"Touching buildplate only creates support where the support structure will "
-"touch the build platform.\n"
-"Everywhere creates support even on top of parts of the model."
-msgstr ""
-
-#: Cura/util/profile.py:166
-msgid "Platform adhesion type"
-msgstr ""
-
-#: Cura/util/profile.py:166
-msgid ""
-"Different options that help in preventing corners from lifting due to "
-"warping.\n"
-"Brim adds a single layer thick flat area around your object which is easy to "
-"cut off afterwards, and the recommended option.\n"
-"Raft adds a thick raster at below the object and a thin interface between "
-"this and your object.\n"
-"(Note that enabling the brim or raft disables the skirt)"
-msgstr ""
-
-#: Cura/util/profile.py:167
-msgid "Support dual extrusion"
-msgstr ""
-
-#: Cura/util/profile.py:167
-msgid ""
-"Which extruder to use for support material, for break-away support you can "
-"use both extruders.\n"
-"But if one of the materials is more expensive then the other you could "
-"select an extruder to use for support material. This causes more extruder "
-"switches.\n"
-"You can also use the 2nd extruder for soluble support materials."
-msgstr ""
-
-#: Cura/util/profile.py:168 Cura/util/profile.py:169 Cura/util/profile.py:170
-#: Cura/util/profile.py:171 Cura/util/profile.py:172
-msgid "Filament"
-msgstr ""
-
-#: Cura/util/profile.py:168
-msgid "Diameter (mm)"
-msgstr ""
-
-#: Cura/util/profile.py:168
-msgid ""
-"Diameter of your filament, as accurately as possible.\n"
-"If you cannot measure this value you will have to calibrate it, a higher "
-"number means less extrusion, a smaller number generates more extrusion."
-msgstr ""
-
-#: Cura/util/profile.py:169
-msgid "Diameter2 (mm)"
-msgstr ""
-
-#: Cura/util/profile.py:169
-msgid ""
-"Diameter of your filament for the 2nd nozzle. Use 0 to use the same diameter "
-"as for nozzle 1."
-msgstr ""
-
-#: Cura/util/profile.py:170
-msgid "Diameter3 (mm)"
-msgstr ""
-
-#: Cura/util/profile.py:170
-msgid ""
-"Diameter of your filament for the 3th nozzle. Use 0 to use the same diameter "
-"as for nozzle 1."
-msgstr ""
-
-#: Cura/util/profile.py:171
-msgid "Diameter4 (mm)"
-msgstr ""
-
-#: Cura/util/profile.py:171
-msgid ""
-"Diameter of your filament for the 4th nozzle. Use 0 to use the same diameter "
-"as for nozzle 1."
-msgstr ""
-
-#: Cura/util/profile.py:172
-msgid "Flow (%)"
-msgstr ""
-
-#: Cura/util/profile.py:172
-msgid ""
-"Flow compensation, the amount of material extruded is multiplied by this "
-"value"
-msgstr ""
-
-#: Cura/util/profile.py:173 Cura/util/profile.py:174 Cura/util/profile.py:175
-#: Cura/util/profile.py:176 Cura/util/profile.py:177 Cura/util/profile.py:178
-msgid "Retraction"
-msgstr ""
-
-#: Cura/util/profile.py:173
-msgid "Speed (mm/s)"
-msgstr ""
-
-#: Cura/util/profile.py:173
-msgid ""
-"Speed at which the filament is retracted, a higher retraction speed works "
-"better. But a very high retraction speed can lead to filament grinding."
-msgstr ""
-
-#: Cura/util/profile.py:174
-msgid "Distance (mm)"
-msgstr ""
-
-#: Cura/util/profile.py:174
-msgid ""
-"Amount of retraction, set at 0 for no retraction at all. A value of 4.5mm "
-"seems to generate good results."
-msgstr ""
-
-#: Cura/util/profile.py:175
-msgid "Dual extrusion switch amount (mm)"
-msgstr ""
-
-#: Cura/util/profile.py:175
-msgid ""
-"Amount of retraction when switching nozzle with dual-extrusion, set at 0 for "
-"no retraction at all. A value of 16.0mm seems to generate good results."
-msgstr ""
-
-#: Cura/util/profile.py:176
-msgid "Minimum travel (mm)"
-msgstr ""
-
-#: Cura/util/profile.py:176
-msgid ""
-"Minimum amount of travel needed for a retraction to happen at all. To make "
-"sure you do not get a lot of retractions in a small area."
-msgstr ""
-
-#: Cura/util/profile.py:177
-msgid "Enable combing"
-msgstr ""
-
-#: Cura/util/profile.py:177
-msgid ""
-"Combing is the act of avoiding holes in the print for the head to travel "
-"over. If combing is disabled the printer head moves straight from the start "
-"point to the end point and it will always retract."
-msgstr ""
-
-#: Cura/util/profile.py:178
-msgid "Minimal extrusion before retracting (mm)"
-msgstr ""
-
-#: Cura/util/profile.py:178
-msgid ""
-"The minimal amount of extrusion that needs to be done before retracting "
-"again if a retraction needs to happen before this minimal is reached the "
-"retraction is ignored.\n"
-"This avoids retraction a lot on the same piece of filament which flattens "
-"the filament and causes grinding issues."
-msgstr ""
-
-#: Cura/util/profile.py:179
-msgid "Initial layer thickness (mm)"
-msgstr ""
-
-#: Cura/util/profile.py:179
-msgid ""
-"Layer thickness of the bottom layer. A thicker bottom layer makes sticking "
-"to the bed easier. Set to 0.0 to have the bottom layer thickness the same as "
-"the other layers."
-msgstr ""
-
-#: Cura/util/profile.py:180
-msgid "Cut off object bottom (mm)"
-msgstr ""
-
-#: Cura/util/profile.py:180
-msgid ""
-"Sinks the object into the platform, this can be used for objects that do not "
-"have a flat bottom and thus create a too small first layer."
-msgstr ""
-
-#: Cura/util/profile.py:182
-msgid "Dual extrusion overlap (mm)"
-msgstr ""
-
-#: Cura/util/profile.py:182
-msgid ""
-"Add a certain amount of overlapping extrusion on dual-extrusion prints. This "
-"bonds the different colors better together."
-msgstr ""
-
-#: Cura/util/profile.py:183
-msgid "Travel speed (mm/s)"
-msgstr ""
-
-#: Cura/util/profile.py:183
-msgid ""
-"Speed at which travel moves are done, a high quality build Ultimaker can "
-"reach speeds of 250mm/s. But some machines might miss steps then."
-msgstr ""
-
-#: Cura/util/profile.py:184
-msgid "Bottom layer speed (mm/s)"
-msgstr ""
-
-#: Cura/util/profile.py:184
-msgid ""
-"Print speed for the bottom layer, you want to print the first layer slower "
-"so it sticks better to the printer bed."
-msgstr ""
-
-#: Cura/util/profile.py:185
-msgid "Infill speed (mm/s)"
-msgstr ""
-
-#: Cura/util/profile.py:185
-msgid ""
-"Speed at which infill parts are printed. If set to 0 then the print speed is "
-"used for the infill. Printing the infill faster can greatly reduce printing, "
-"but this can negatively effect print quality.."
-msgstr ""
-
-#: Cura/util/profile.py:186 Cura/util/profile.py:187 Cura/util/profile.py:194
-#: Cura/util/profile.py:195 Cura/util/profile.py:196 Cura/util/profile.py:197
-#: Cura/util/profile.py:198
-msgid "Cool"
-msgstr ""
-
-#: Cura/util/profile.py:186
-msgid "Minimal layer time (sec)"
-msgstr ""
-
-#: Cura/util/profile.py:186
-msgid ""
-"Minimum time spend in a layer, gives the layer time to cool down before the "
-"next layer is put on top. If the layer will be placed down too fast the "
-"printer will slow down to make sure it has spend at least this amount of "
-"seconds printing this layer."
-msgstr ""
-
-#: Cura/util/profile.py:187
-msgid "Enable cooling fan"
-msgstr ""
-
-#: Cura/util/profile.py:187
-msgid ""
-"Enable the cooling fan during the print. The extra cooling from the cooling "
-"fan is essential during faster prints."
-msgstr ""
-
-#: Cura/util/profile.py:189
-msgid "Line count"
-msgstr ""
-
-#: Cura/util/profile.py:189
-msgid ""
-"The skirt is a line drawn around the object at the first layer. This helps "
-"to prime your extruder, and to see if the object fits on your platform.\n"
-"Setting this to 0 will disable the skirt. Multiple skirt lines can help "
-"priming your extruder better for small objects."
-msgstr ""
-
-#: Cura/util/profile.py:190
-msgid "Start distance (mm)"
-msgstr ""
-
-#: Cura/util/profile.py:190
-msgid ""
-"The distance between the skirt and the first layer.\n"
-"This is the minimal distance, multiple skirt lines will be put outwards from "
-"this distance."
-msgstr ""
-
-#: Cura/util/profile.py:191
-msgid "Minimal length (mm)"
-msgstr ""
-
-#: Cura/util/profile.py:191
-msgid ""
-"The minimal length of the skirt, if this minimal length is not reached it "
-"will add more skirt lines to reach this minimal lenght.\n"
-"Note: If the line count is set to 0 this is ignored."
-msgstr ""
-
-#: Cura/util/profile.py:194
-msgid "Fan on layer number"
-msgstr ""
-
-#: Cura/util/profile.py:194
-msgid ""
-"The layer at which the fan is turned on. The first layer is layer 0. The "
-"first layer can stick better if you turn on the fan on, on the 2nd layer."
-msgstr ""
-
-#: Cura/util/profile.py:195
-msgid "Fan speed min (%)"
-msgstr ""
-
-#: Cura/util/profile.py:195
-msgid ""
-"When the fan is turned on, it is enabled at this speed setting. If cool "
-"slows down the layer, the fan is adjusted between the min and max speed. "
-"Minimal fan speed is used if the layer is not slowed down due to cooling."
-msgstr ""
-
-#: Cura/util/profile.py:196
-msgid "Fan speed max (%)"
-msgstr ""
-
-#: Cura/util/profile.py:196
-msgid ""
-"When the fan is turned on, it is enabled at this speed setting. If cool "
-"slows down the layer, the fan is adjusted between the min and max speed. "
-"Maximal fan speed is used if the layer is slowed down due to cooling by more "
-"than 200%."
-msgstr ""
-
-#: Cura/util/profile.py:197
-msgid "Minimum speed (mm/s)"
-msgstr ""
-
-#: Cura/util/profile.py:197
-msgid ""
-"The minimal layer time can cause the print to slow down so much it starts to "
-"ooze. The minimal feedrate protects against this. Even if a print gets slown "
-"down it will never be slower than this minimal speed."
-msgstr ""
-
-#: Cura/util/profile.py:198
-msgid "Cool head lift"
-msgstr ""
-
-#: Cura/util/profile.py:198
-msgid ""
-"Lift the head if the minimal speed is hit because of cool slowdown, and wait "
-"the extra time so the minimal layer time is always hit."
-msgstr ""
-
-#: Cura/util/profile.py:203 Cura/util/profile.py:204 Cura/util/profile.py:205
-msgid "Infill"
-msgstr ""
-
-#: Cura/util/profile.py:203
-msgid "Solid infill top"
-msgstr ""
-
-#: Cura/util/profile.py:203
-msgid ""
-"Create a solid top surface, if set to false the top is filled with the fill "
-"percentage. Useful for cups/vases."
-msgstr ""
-
-#: Cura/util/profile.py:204
-msgid "Solid infill bottom"
-msgstr ""
-
-#: Cura/util/profile.py:204
-msgid ""
-"Create a solid bottom surface, if set to false the bottom is filled with the "
-"fill percentage. Useful for buildings."
-msgstr ""
-
-#: Cura/util/profile.py:205
-msgid "Infill overlap (%)"
-msgstr ""
-
-#: Cura/util/profile.py:205
-msgid ""
-"Amount of overlap between the infill and the walls. There is a slight "
-"overlap with the walls and the infill so the walls connect firmly to the "
-"infill."
-msgstr ""
-
-#: Cura/util/profile.py:206
-msgid "Fill amount (%)"
-msgstr ""
-
-#: Cura/util/profile.py:206
-#, python-format
-msgid ""
-"Amount of infill structure in the support material, less material gives "
-"weaker support which is easier to remove. 20% seems to be a good average."
-msgstr ""
-
-#: Cura/util/profile.py:207
-msgid "Distance X/Y (mm)"
-msgstr ""
-
-#: Cura/util/profile.py:207
-msgid ""
-"Distance of the support material from the print, in the X/Y directions.\n"
-"0.7mm gives a nice distance from the print so the support does not stick to "
-"the print."
-msgstr ""
-
-#: Cura/util/profile.py:208
-msgid "Distance Z (mm)"
-msgstr ""
-
-#: Cura/util/profile.py:208
-msgid ""
-"Distance from the top/bottom of the support to the print. A small gap here "
-"makes it easier to remove the support but makes the print a bit uglier.\n"
-"0.15mm gives a good seperation of the support material."
-msgstr ""
-
-#: Cura/util/profile.py:212
-msgid "Brim"
-msgstr ""
-
-#: Cura/util/profile.py:212
-msgid "Brim line amount"
-msgstr ""
-
-#: Cura/util/profile.py:212
-msgid ""
-"The amount of lines used for a brim, more lines means a larger brim which "
-"sticks better, but this also makes your effective print area smaller."
-msgstr ""
-
-#: Cura/util/profile.py:213 Cura/util/profile.py:214 Cura/util/profile.py:215
-#: Cura/util/profile.py:216 Cura/util/profile.py:217 Cura/util/profile.py:218
-msgid "Raft"
-msgstr ""
-
-#: Cura/util/profile.py:213
-msgid "Extra margin (mm)"
-msgstr ""
-
-#: Cura/util/profile.py:213
-msgid ""
-"If the raft is enabled, this is the extra raft area around the object which "
-"is also rafted. Increasing this margin will create a stronger raft while "
-"using more material and leaving less are for your print."
-msgstr ""
-
-#: Cura/util/profile.py:214
-msgid "Line spacing (mm)"
-msgstr ""
-
-#: Cura/util/profile.py:214
-msgid ""
-"When you are using the raft this is the distance between the centerlines of "
-"the raft line."
-msgstr ""
-
-#: Cura/util/profile.py:215
-msgid "Base thickness (mm)"
-msgstr ""
-
-#: Cura/util/profile.py:215
-msgid ""
-"When you are using the raft this is the thickness of the base layer which is "
-"put down."
-msgstr ""
-
-#: Cura/util/profile.py:216
-msgid "Base line width (mm)"
-msgstr ""
-
-#: Cura/util/profile.py:216
-msgid ""
-"When you are using the raft this is the width of the base layer lines which "
-"are put down."
-msgstr ""
-
-#: Cura/util/profile.py:217
-msgid "Interface thickness (mm)"
-msgstr ""
-
-#: Cura/util/profile.py:217
-msgid ""
-"When you are using the raft this is the thickness of the interface layer "
-"which is put down."
-msgstr ""
-
-#: Cura/util/profile.py:218
-msgid "Interface line width (mm)"
-msgstr ""
-
-#: Cura/util/profile.py:218
-msgid ""
-"When you are using the raft this is the width of the interface layer lines "
-"which are put down."
-msgstr ""
-
-#: Cura/util/profile.py:220 Cura/util/profile.py:221 Cura/util/profile.py:222
-#: Cura/util/profile.py:223
-msgid "Fix horrible"
-msgstr ""
-
-#: Cura/util/profile.py:220
-msgid "Combine everything (Type-A)"
-msgstr ""
-
-#: Cura/util/profile.py:220 Cura/util/profile.py:221
-msgid ""
-"This expert option adds all parts of the model together. The result is "
-"usually that internal cavities disappear. Depending on the model this can be "
-"intended or not. Enabling this option is at your own risk. Type-A is "
-"depended on the model normals and tries to keep some internal holes intact. "
-"Type-B ignores all internal holes and only keeps the outside shape per layer."
-msgstr ""
-
-#: Cura/util/profile.py:221
-msgid "Combine everything (Type-B)"
-msgstr ""
-
-#: Cura/util/profile.py:222
-msgid "Keep open faces"
-msgstr ""
-
-#: Cura/util/profile.py:222
-msgid ""
-"This expert option keeps all the open bits of the model intact. Normally "
-"Cura tries to stitch up small holes and remove everything with big holes, "
-"but this option keeps bits that are not properly part of anything and just "
-"goes with whatever it is left. This option is usually not what you want, but "
-"it might enable you to slice models otherwise failing to produce proper "
-"paths.\n"
-"As with all \"Fix horrible\" options, results may vary and use at your own "
-"risk."
-msgstr ""
-
-#: Cura/util/profile.py:223
-msgid "Extensive stitching"
-msgstr ""
-
-#: Cura/util/profile.py:223
-msgid ""
-"Extrensive stitching tries to fix up open holes in the model by closing the "
-"hole with touching polygons. This algorthm is quite expensive and could "
-"introduce a lot of processing time.\n"
-"As with all \"Fix horrible\" options, results may vary and use at your own "
-"risk."
-msgstr ""
-
-#: Cura/util/profile.py:338
-msgid "Save profile on slice"
-msgstr ""
-
-#: Cura/util/profile.py:338
-msgid ""
-"When slicing save the profile as [stl_file]_profile.ini next to the model."
-msgstr ""
-
-#: Cura/util/profile.py:339
-msgid "Cost (price/kg)"
-msgstr ""
-
-#: Cura/util/profile.py:339
-msgid "Cost of your filament per kg, to estimate the cost of the final print."
-msgstr ""
-
-#: Cura/util/profile.py:340
-msgid "Cost (price/m)"
-msgstr ""
-
-#: Cura/util/profile.py:340
-msgid ""
-"Cost of your filament per meter, to estimate the cost of the final print."
-msgstr ""
-
-#: Cura/util/profile.py:341
-msgid "Auto detect SD card drive"
-msgstr ""
-
-#: Cura/util/profile.py:341
-msgid ""
-"Auto detect the SD card. You can disable this because on some systems "
-"external hard-drives or USB sticks are detected as SD card."
-msgstr ""
-
-#: Cura/util/profile.py:342
-msgid "Check for updates"
-msgstr ""
-
-#: Cura/util/profile.py:342
-msgid "Check for newer versions of Cura on startup"
-msgstr ""
-
-#: Cura/util/profile.py:343
-msgid "Send usage statistics"
-msgstr ""
-
-#: Cura/util/profile.py:343
-msgid "Submit anonymous usage information to improve next versions of Cura"
-msgstr ""
-
-#: Cura/util/profile.py:345
-msgid "Density (kg/m3)"
-msgstr ""
-
-#: Cura/util/profile.py:345
-msgid ""
-"Weight of the filament per m3. Around 1240 for PLA. And around 1040 for ABS. "
-"This value is used to estimate the weight if the filament used for the print."
-msgstr ""
-
-#: Cura/util/profile.py:348
-msgid "Model colour"
-msgstr ""
-
-#: Cura/util/profile.py:349
-msgid "Model colour (2)"
-msgstr ""
-
-#: Cura/util/profile.py:350
-msgid "Model colour (3)"
-msgstr ""
-
-#: Cura/util/profile.py:351
-msgid "Model colour (4)"
-msgstr ""
-
-#: Cura/util/profile.py:362
-msgid "Maximum width (mm)"
-msgstr ""
-
-#: Cura/util/profile.py:362 Cura/util/profile.py:363 Cura/util/profile.py:364
-msgid "Size of the machine in mm"
-msgstr ""
-
-#: Cura/util/profile.py:363
-msgid "Maximum depth (mm)"
-msgstr ""
-
-#: Cura/util/profile.py:364
-msgid "Maximum height (mm)"
-msgstr ""
-
-#: Cura/util/profile.py:367
-msgid ""
-"If you have an heated bed, this enabled heated bed settings (requires "
-"restart)"
-msgstr ""
-
-#: Cura/util/profile.py:368
-msgid "GCode Flavor"
-msgstr ""
-
-#: Cura/util/profile.py:368
-msgid ""
-"Flavor of generated GCode.\n"
-"RepRap is normal 5D GCode which works on Marlin/Sprinter based firmwares.\n"
-"UltiGCode is a variation of the RepRap GCode which puts more settings in the "
-"machine instead of the slicer."
-msgstr ""
-
-#: Cura/util/profile.py:369
-msgid "Extruder count"
-msgstr ""
-
-#: Cura/util/profile.py:369
-msgid "Amount of extruders in your machine."
-msgstr ""
-
-#: Cura/util/profile.py:370 Cura/util/profile.py:372 Cura/util/profile.py:374
-msgid "Offset X"
-msgstr ""
-
-#: Cura/util/profile.py:370 Cura/util/profile.py:371
-msgid "The offset of your secondary extruder compared to the primary."
-msgstr ""
-
-#: Cura/util/profile.py:371 Cura/util/profile.py:373 Cura/util/profile.py:375
-msgid "Offset Y"
-msgstr ""
-
-#: Cura/util/profile.py:372 Cura/util/profile.py:373
-msgid "The offset of your tertiary extruder compared to the primary."
-msgstr ""
-
-#: Cura/util/profile.py:374 Cura/util/profile.py:375
-msgid "The offset of your forth extruder compared to the primary."
-msgstr ""
-
-#: Cura/util/profile.py:376
-msgid "E-Steps per 1mm filament"
-msgstr ""
-
-#: Cura/util/profile.py:376
-msgid ""
-"Amount of steps per mm filament extrusion. If set to 0 then this value is "
-"ignored and the value in your firmware is used."
-msgstr ""
-
-#: Cura/util/profile.py:377
-msgid "Serial port"
-msgstr ""
-
-#: Cura/util/profile.py:377
-msgid "Serial port to use for communication with the printer"
-msgstr ""
-
-#: Cura/util/profile.py:379
-msgid "Baudrate"
-msgstr ""
-
-#: Cura/util/profile.py:379
-msgid ""
-"Speed of the serial port communication\n"
-"Needs to match your firmware settings\n"
-"Common values are 250000, 115200, 57600"
-msgstr ""
-
-#: Cura/util/profile.py:382
-msgid "Head size towards X min (mm)"
-msgstr ""
-
-#: Cura/util/profile.py:382
-msgid ""
-"The head size when printing multiple objects, measured from the tip of the "
-"nozzle towards the outer part of the head. 75mm for an Ultimaker if the fan "
-"is on the left side."
-msgstr ""
-
-#: Cura/util/profile.py:383
-msgid "Head size towards Y min (mm)"
-msgstr ""
-
-#: Cura/util/profile.py:383 Cura/util/profile.py:384
-msgid ""
-"The head size when printing multiple objects, measured from the tip of the "
-"nozzle towards the outer part of the head. 18mm for an Ultimaker if the fan "
-"is on the left side."
-msgstr ""
-
-#: Cura/util/profile.py:384
-msgid "Head size towards X max (mm)"
-msgstr ""
-
-#: Cura/util/profile.py:385
-msgid "Head size towards Y max (mm)"
-msgstr ""
-
-#: Cura/util/profile.py:385
-msgid ""
-"The head size when printing multiple objects, measured from the tip of the "
-"nozzle towards the outer part of the head. 35mm for an Ultimaker if the fan "
-"is on the left side."
-msgstr ""
-
-#: Cura/util/profile.py:386
-msgid "Printer gantry height (mm)"
-msgstr ""
-
-#: Cura/util/profile.py:386
-msgid ""
-"The height of the gantry holding up the printer head. If an object is higher "
-"then this then you cannot print multiple objects one for one. 60mm for an "
-"Ultimaker."
-msgstr ""
+# SOME DESCRIPTIVE TITLE.\r
+# Copyright (C) 2013\r
+# This file is distributed under the same license as the Cura package.\r
+# Ilya Kulakov <kulakov.ilya@gmail.com>, 2013.\r
+#\r
+msgid ""\r
+msgstr ""\r
+"Project-Id-Version: Cura\n"\r
+"Report-Msgid-Bugs-To: \n"\r
+"POT-Creation-Date: 2013-10-01 15:32+0200\n"\r
+"PO-Revision-Date: 2013-09-27 09:41+0100\n"\r
+"Last-Translator: \n"\r
+"Language-Team: LANGUAGE <LL@li.org>\n"\r
+"MIME-Version: 1.0\n"\r
+"Content-Type: text/plain; charset=UTF-8\n"\r
+"Content-Transfer-Encoding: 8bit\n"\r
+"X-Generator: Poedit 1.5.7\n"\r
+\r
+#: Cura/gui/app.py:86 Cura/gui/mainWindow.py:524\r
+msgid "A new version of Cura is available, would you like to download?"\r
+msgstr ""\r
+\r
+#: Cura/gui/app.py:86 Cura/gui/mainWindow.py:524\r
+msgid "New version available"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:220\r
+msgid "Add new machine wizard"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:222\r
+msgid "First time run wizard"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:223\r
+msgid "Welcome, and thanks for trying Cura!"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:225\r
+msgid "This wizard will help you with the following steps:"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:226\r
+msgid "* Configure Cura for your machine"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:227\r
+msgid "* Optionally upgrade your firmware"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:228\r
+msgid "* Optionally check if your machine is working safely"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:229\r
+msgid "* Optionally level your printer bed"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:239\r
+msgid ""\r
+"RepRap machines are vastly different, and there is no\n"\r
+"default configuration in Cura for any of them."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:240\r
+msgid ""\r
+"If you like a default profile for your machine added,\n"\r
+"then make an issue on github."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:242\r
+msgid "You will have to manually install Marlin or Sprinter firmware."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:244\r
+msgid "Machine name"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:245\r
+msgid "Machine width (mm)"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:246\r
+msgid "Machine depth (mm)"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:247\r
+msgid "Machine height (mm)"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:248 Cura/util/profile.py:158\r
+msgid "Nozzle size (mm)"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:249 Cura/util/profile.py:367\r
+msgid "Heated bed"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:250\r
+msgid "Bed center is 0,0,0 (RoStock)"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:270\r
+msgid "Select your machine"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:271\r
+msgid "What kind of machine do you have:"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:278\r
+msgid "Other (Ex: RepRap)"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:281\r
+msgid ""\r
+"The collection of anonymous usage information helps with the continued "\r
+"improvement of Cura."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:282\r
+msgid ""\r
+"This does NOT submit your models online nor gathers any privacy related "\r
+"information."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:283\r
+msgid "Submit anonymous usage information:"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:284\r
+msgid "For full details see: http://wiki.ultimaker.com/Cura:stats"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:346\r
+msgid "Select upgraded parts you have"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:347\r
+msgid ""\r
+"To assist you in having better default settings for your Ultimaker\n"\r
+"Cura would like to know which upgrades you have in your machine."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:349\r
+msgid "Extruder drive upgrade"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:350\r
+msgid "Heated printer bed (self built)"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:351\r
+msgid "Dual extrusion (experimental)"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:353\r
+msgid ""\r
+"If you have an Ultimaker bought after october 2012 you will have the\n"\r
+"Extruder drive upgrade. If you do not have this upgrade,\n"\r
+"it is highly recommended to improve reliability."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:354\r
+msgid ""\r
+"This upgrade can be bought from the Ultimaker webshop\n"\r
+"or found on thingiverse as thing:26094"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:373\r
+msgid "Upgrade Ultimaker Firmware"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:374\r
+msgid ""\r
+"Firmware is the piece of software running directly on your 3D printer.\n"\r
+"This firmware controls the step motors, regulates the temperature\n"\r
+"and ultimately makes your printer work."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:376\r
+msgid ""\r
+"The firmware shipping with new Ultimakers works, but upgrades\n"\r
+"have been made to make better prints, and make calibration easier."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:378\r
+msgid ""\r
+"Cura requires these new features and thus\n"\r
+"your firmware will most likely need to be upgraded.\n"\r
+"You will get the chance to do so now."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:383\r
+msgid "Do not upgrade to this firmware if:"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:384\r
+msgid "* You have an older machine based on ATMega1280"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:385\r
+msgid "* Have other changes in the firmware"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:419\r
+msgid ""\r
+"It is a good idea to do a few sanity checks now on your Ultimaker.\n"\r
+"You can skip these if you know your machine is functional."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:420\r
+msgid "Run checks"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:420\r
+msgid "Skip checks"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:424\r
+msgid "Communication:"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:425\r
+msgid "Temperature:"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:426\r
+msgid "Endstops:"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:431\r
+msgid "Show error log"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:465\r
+msgid "Connecting to machine."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:486\r
+msgid "Cooldown before temperature check."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:492 Cura/gui/configWizard.py:499\r
+msgid "Checking the heater and temperature sensor."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:510\r
+msgid "Please make sure none of the endstops are pressed."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:523\r
+msgid "Temperature measurement FAILED!"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:528\r
+#, python-format\r
+msgid "Head temperature: %d"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:535 Cura/gui/configWizard.py:544\r
+#, python-format\r
+msgid "Communication State: %s"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:538\r
+msgid "Failed to establish connection with the printer."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:583\r
+msgid "Please press the right X endstop."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:588\r
+msgid "Please press the left X endstop."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:593\r
+msgid "Please press the front Y endstop."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:598\r
+msgid "Please press the back Y endstop."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:603\r
+msgid "Please press the top Z endstop."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:608\r
+msgid "Please press the bottom Z endstop."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:614\r
+msgid "Checkup finished"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:657\r
+msgid "Calibrating the Steps Per E requires some manual actions."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:658\r
+msgid "First remove any filament from your machine."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:659\r
+msgid ""\r
+"Next put in your filament so the tip is aligned with the\n"\r
+"top of the extruder drive."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:660\r
+msgid "We'll push the filament 100mm"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:661\r
+msgid "Extrude 100mm filament"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:662\r
+msgid ""\r
+"Now measure the amount of extruded filament:\n"\r
+"(this can be more or less then 100mm)"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:663\r
+msgid "Save"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:664\r
+msgid "This results in the following steps per E:"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:666\r
+msgid "You can repeat these steps to get better calibration."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:669\r
+msgid ""\r
+"If you still have filament in your printer which needs\n"\r
+"heat to remove, press the heat up button below:"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:670\r
+msgid "Heatup for filament removal"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:693 Cura/gui/configWizard.py:725\r
+msgid ""\r
+"Error: Failed to open serial port to machine\n"\r
+"If this keeps happening, try disconnecting and reconnecting the USB cable"\r
+msgstr ""\r
+\r
+#: Cura/gui/firmwareInstall.py:39\r
+msgid ""\r
+"I am sorry, but Cura does not ship with a default firmware for your machine "\r
+"configuration."\r
+msgstr ""\r
+\r
+#: Cura/gui/firmwareInstall.py:39 Cura/gui/firmwareInstall.py:98\r
+#: Cura/gui/mainWindow.py:459\r
+msgid "Firmware update"\r
+msgstr ""\r
+\r
+#: Cura/gui/firmwareInstall.py:49\r
+msgid "OK"\r
+msgstr ""\r
+\r
+#: Cura/gui/firmwareInstall.py:68\r
+msgid "Reading firmware..."\r
+msgstr ""\r
+\r
+#: Cura/gui/firmwareInstall.py:70\r
+msgid "Connecting to machine..."\r
+msgstr ""\r
+\r
+#: Cura/gui/firmwareInstall.py:87\r
+msgid "Uploading firmware..."\r
+msgstr ""\r
+\r
+#: Cura/gui/firmwareInstall.py:90\r
+#, python-format\r
+msgid ""\r
+"Done!\n"\r
+"Installed firmware: %s"\r
+msgstr ""\r
+\r
+#: Cura/gui/firmwareInstall.py:92\r
+msgid "Failed to write firmware.\n"\r
+msgstr ""\r
+\r
+#: Cura/gui/firmwareInstall.py:97\r
+msgid ""\r
+"Failed to find machine for firmware upgrade\n"\r
+"Is your machine connected to the PC?"\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:56\r
+msgid "Load model file...\tCTRL+L"\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:58\r
+msgid "Save model...\tCTRL+S"\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:60\r
+msgid "Clear platform"\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:64\r
+msgid "Print...\tCTRL+P"\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:66 Cura/gui/sceneView.py:244\r
+msgid "Save GCode..."\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:68\r
+msgid "Show slice engine log..."\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:72\r
+msgid "Open Profile..."\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:75\r
+msgid "Save Profile..."\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:78\r
+msgid "Load Profile from GCode..."\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:82\r
+msgid "Reset Profile to default"\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:87\r
+msgid "Preferences...\tCTRL+,"\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:89\r
+msgid "Machine settings..."\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:95\r
+msgid "Recent Model Files"\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:102\r
+msgid "Recent Profile Files"\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:108\r
+msgid "Quit"\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:110\r
+msgid "File"\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:114\r
+msgid "Switch to quickprint..."\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:118\r
+msgid "Switch to full settings..."\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:128\r
+msgid "Minecraft map import..."\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:132\r
+msgid "PID Debugger..."\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:135\r
+msgid "Copy profile to clipboard"\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:137\r
+msgid "Tools"\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:143 Cura/util/profile.py:158\r
+msgid "Machine"\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:146\r
+msgid "Open expert settings..."\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:150\r
+msgid "Run first run wizard..."\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:152\r
+msgid "Run bed leveling wizard..."\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:155\r
+msgid "Run head offset wizard..."\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:158\r
+msgid "Expert"\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:161\r
+msgid "Online documentation..."\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:163\r
+msgid "Report a problem..."\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:165\r
+msgid "Check for update..."\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:167\r
+msgid "Open YouMagine website..."\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:169\r
+msgid "About Cura..."\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:171\r
+msgid "Help"\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:391\r
+msgid "Add new machine..."\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:396\r
+msgid "Install custom firmware"\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:398\r
+msgid "Install default Marlin firmware"\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:402\r
+msgid "Select profile file to load"\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:414\r
+msgid "Select gcode file to load profile from"\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:427\r
+msgid ""\r
+"No profile found in GCode file.\n"\r
+"This feature only works with GCode files made by Cura 12.07 or newer."\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:427\r
+msgid "Profile load error"\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:431\r
+msgid "Select profile file to save"\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:439\r
+msgid ""\r
+"This will reset all profile settings to defaults.\n"\r
+"Unless you have saved your current profile, all settings will be lost!\n"\r
+"Do you really want to reset?"\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:439\r
+msgid "Profile reset"\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:459\r
+msgid ""\r
+"Warning: Installing a custom firmware does not guarantee that you machine "\r
+"will function correctly, and could damage your machine."\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:460\r
+msgid "Open firmware to upload"\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:527\r
+msgid "You are running the latest version of Cura!"\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:527\r
+msgid "Awesome!"\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:583\r
+msgid "Plugins"\r
+msgstr ""\r
+\r
+#: Cura/gui/pluginPanel.py:26\r
+msgid "Plugins:"\r
+msgstr ""\r
+\r
+#: Cura/gui/pluginPanel.py:30\r
+msgid "Open plugin location"\r
+msgstr ""\r
+\r
+#: Cura/gui/pluginPanel.py:31\r
+msgid "Enabled plugins"\r
+msgstr ""\r
+\r
+#: Cura/gui/pluginPanel.py:133\r
+msgid "You need to select a plugin before you can add anything."\r
+msgstr ""\r
+\r
+#: Cura/gui/pluginPanel.py:133\r
+msgid "Error: no plugin selected"\r
+msgstr ""\r
+\r
+#: Cura/gui/preferencesDialog.py:24\r
+msgid "Colours"\r
+msgstr ""\r
+\r
+#: Cura/gui/preferencesDialog.py:29\r
+msgid "Filament settings"\r
+msgstr ""\r
+\r
+#: Cura/gui/preferencesDialog.py:39\r
+msgid "Cura settings"\r
+msgstr ""\r
+\r
+#: Cura/gui/preferencesDialog.py:73\r
+msgid "Machine settings"\r
+msgstr ""\r
+\r
+#: Cura/gui/preferencesDialog.py:82\r
+msgid "Printer head size"\r
+msgstr ""\r
+\r
+#: Cura/gui/preferencesDialog.py:90\r
+#, python-format\r
+msgid "Extruder %d"\r
+msgstr ""\r
+\r
+#: Cura/gui/preferencesDialog.py:94\r
+msgid "Communication settings"\r
+msgstr ""\r
+\r
+#: Cura/gui/preferencesDialog.py:137\r
+msgid "Cannot remove the last machine configuration in Cura"\r
+msgstr ""\r
+\r
+#: Cura/gui/preferencesDialog.py:137\r
+msgid "Machine remove error"\r
+msgstr ""\r
+\r
+#: Cura/gui/printWindow.py:129\r
+msgid "Printing"\r
+msgstr ""\r
+\r
+#: Cura/gui/printWindow.py:158\r
+msgid "Statistics"\r
+msgstr ""\r
+\r
+#: Cura/gui/printWindow.py:163\r
+msgid ""\r
+"Your computer is running on battery power.\n"\r
+"Connect your computer to AC power or your print might not finish."\r
+msgstr ""\r
+\r
+#: Cura/gui/printWindow.py:174\r
+msgid ""\r
+"Filament: ####.##m #.##g\n"\r
+"Estimated print time: #####:##\n"\r
+"Machine state:\n"\r
+"Detecting baudrateXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX"\r
+msgstr ""\r
+\r
+#: Cura/gui/printWindow.py:179\r
+msgid "Connect"\r
+msgstr ""\r
+\r
+#: Cura/gui/printWindow.py:181 Cura/gui/sceneView.py:65\r
+#: Cura/gui/sceneView.py:804\r
+msgid "Print"\r
+msgstr ""\r
+\r
+#: Cura/gui/printWindow.py:182 Cura/gui/printWindow.py:419\r
+msgid "Pause"\r
+msgstr ""\r
+\r
+#: Cura/gui/printWindow.py:183\r
+msgid "Cancel print"\r
+msgstr ""\r
+\r
+#: Cura/gui/printWindow.py:184\r
+msgid "Error log"\r
+msgstr ""\r
+\r
+#: Cura/gui/printWindow.py:205\r
+msgid "BedTemp:"\r
+msgstr ""\r
+\r
+#: Cura/gui/printWindow.py:213\r
+msgid "Temp:"\r
+msgstr ""\r
+\r
+#: Cura/gui/printWindow.py:261\r
+msgid "Jog"\r
+msgstr ""\r
+\r
+#: Cura/gui/printWindow.py:276\r
+msgid "Outer wall:"\r
+msgstr ""\r
+\r
+#: Cura/gui/printWindow.py:279\r
+msgid "Inner wall:"\r
+msgstr ""\r
+\r
+#: Cura/gui/printWindow.py:282\r
+msgid "Fill:"\r
+msgstr ""\r
+\r
+#: Cura/gui/printWindow.py:285\r
+msgid "Support:"\r
+msgstr ""\r
+\r
+#: Cura/gui/printWindow.py:289 Cura/util/profile.py:183\r
+#: Cura/util/profile.py:184 Cura/util/profile.py:185\r
+msgid "Speed"\r
+msgstr ""\r
+\r
+#: Cura/gui/printWindow.py:307\r
+msgid "Term"\r
+msgstr ""\r
+\r
+#: Cura/gui/printWindow.py:314\r
+msgid "Enable timelapse movie recording"\r
+msgstr ""\r
+\r
+#: Cura/gui/printWindow.py:328\r
+msgid "Show preview"\r
+msgstr ""\r
+\r
+#: Cura/gui/printWindow.py:334\r
+msgid "Camera"\r
+msgstr ""\r
+\r
+#: Cura/gui/printWindow.py:417\r
+msgid "Resume"\r
+msgstr ""\r
+\r
+#: Cura/gui/printWindow.py:434\r
+msgid "Loading gcode...\n"\r
+msgstr ""\r
+\r
+#: Cura/gui/printWindow.py:436\r
+#, python-format\r
+msgid "Filament: %(amount).2fm %(weight).2fg\n"\r
+msgstr ""\r
+\r
+#: Cura/gui/printWindow.py:439\r
+#, python-format\r
+msgid "Filament cost: %s\n"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:64\r
+msgid "Load"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:69\r
+msgid "Rotate"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:70\r
+msgid "Scale"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:71\r
+msgid "Mirror"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:73 Cura/gui/sceneView.py:76\r
+msgid "Reset"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:74\r
+msgid "Lay flat"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:77\r
+msgid "To max"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:79\r
+msgid "Mirror X"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:80\r
+msgid "Mirror Y"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:81\r
+msgid "Mirror Z"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:89\r
+msgid "Scale X"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:91\r
+msgid "Scale Y"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:93\r
+msgid "Scale Z"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:95\r
+msgid "Size X (mm)"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:97\r
+msgid "Size Y (mm)"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:99\r
+msgid "Size Z (mm)"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:101\r
+msgid "Uniform scale"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:104\r
+msgid "View mode"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:104\r
+msgid "Normal"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:104\r
+msgid "Overhang"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:104\r
+msgid "Transparent"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:104\r
+msgid "X-Ray"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:104\r
+msgid "Layers"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:107\r
+msgid "Share on YouMagine"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:198\r
+msgid "Open 3D model"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:213\r
+msgid "Save 3D model"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:243\r
+msgid "Print with USB"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:245\r
+msgid "Slice engine log..."\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:257 Cura/gui/sceneView.py:810\r
+msgid "Save toolpath"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:296\r
+msgid "The slicing engine reported the following"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:296\r
+msgid "Engine log..."\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:675\r
+msgid "Delete object"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:676\r
+msgid "Center on platform"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:677\r
+msgid "Multiply object"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:678\r
+msgid "Split object into parts"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:680\r
+msgid "Dual extrusion merge"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:682\r
+msgid "Delete all objects"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:807\r
+msgid "Toolpath to SD"\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:1117\r
+msgid "Loading toolpath for visualization..."\r
+msgstr ""\r
+\r
+#: Cura/gui/sceneView.py:1168\r
+msgid "Overhang view not working due to lack of OpenGL shaders support."\r
+msgstr ""\r
+\r
+#: Cura/gui/simpleMode.py:20\r
+msgid "High quality print"\r
+msgstr ""\r
+\r
+#: Cura/gui/simpleMode.py:21\r
+msgid "Normal quality print"\r
+msgstr ""\r
+\r
+#: Cura/gui/simpleMode.py:22\r
+msgid "Fast low quality print"\r
+msgstr ""\r
+\r
+#: Cura/gui/simpleMode.py:23\r
+msgid "Thin walled cup or vase"\r
+msgstr ""\r
+\r
+#: Cura/gui/simpleMode.py:33\r
+msgid "Print support structure"\r
+msgstr ""\r
+\r
+#: Cura/gui/simpleMode.py:38\r
+msgid "Select a print type:"\r
+msgstr ""\r
+\r
+#: Cura/gui/simpleMode.py:48\r
+msgid "Material:"\r
+msgstr ""\r
+\r
+#: Cura/gui/simpleMode.py:52\r
+msgid "Diameter:"\r
+msgstr ""\r
+\r
+#: Cura/gui/simpleMode.py:58\r
+msgid "Other:"\r
+msgstr ""\r
+\r
+#: Cura/gui/simpleMode.py:119\r
+msgid "Exterior Only"\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/batchRun.py:14\r
+msgid "Cura - Batch run"\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/batchRun.py:29\r
+msgid "Add"\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/batchRun.py:30\r
+msgid "Remove"\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/batchRun.py:31\r
+msgid "Prepare all"\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/batchRun.py:47\r
+msgid "Open file to batch prepare"\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/batchRun.py:134\r
+#, python-format\r
+msgid "Building: %d                           "\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/batchRun.py:137\r
+#, python-format\r
+msgid "Done: 0/%d                           "\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/batchRun.py:140\r
+msgid "Abort"\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/batchRun.py:163 Cura/gui/tools/batchRun.py:233\r
+msgid "Close"\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/batchRun.py:187\r
+#, python-format\r
+msgid "Build: %d models"\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/batchRun.py:188\r
+#, python-format\r
+msgid ""\r
+"\n"\r
+"Slicing took: %(hours)02d:%(minutes)02d"\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/batchRun.py:198\r
+#, python-format\r
+msgid "Building: [%(index)d/%(size)d]"\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/batchRun.py:214\r
+msgid "Aborted by user."\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/batchRun.py:228\r
+#, python-format\r
+msgid "Done %(index)d/%(size)d"\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/batchRun.py:236\r
+msgid "To SDCard"\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:79\r
+msgid "Checking token"\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:83\r
+msgid "Failed to contact YouMagine.com"\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:83 Cura/gui/tools/youmagineGui.py:116\r
+#: Cura/gui/tools/youmagineGui.py:133 Cura/gui/tools/youmagineGui.py:140\r
+#: Cura/gui/tools/youmagineGui.py:148 Cura/gui/tools/youmagineGui.py:153\r
+msgid "YouMagine error."\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:100\r
+msgid "Cura is now authorized to share on YouMagine"\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:100\r
+msgid "YouMagine."\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:112\r
+msgid "Creating new design on YouMagine..."\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:116\r
+msgid "Failed to create a design, nothing uploaded!"\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:120\r
+#, python-format\r
+msgid "Building model %s..."\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:131\r
+#, python-format\r
+msgid "Uploading model %s..."\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:133 Cura/gui/tools/youmagineGui.py:140\r
+#: Cura/gui/tools/youmagineGui.py:148\r
+#, python-format\r
+msgid "Failed to upload %s!"\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:137\r
+#, python-format\r
+msgid "Uploading file %s..."\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:145\r
+#, python-format\r
+msgid "Uploading image %s..."\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:153\r
+msgid "Failed to upload snapshot!"\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:158\r
+msgid "Publishing design..."\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:230\r
+msgid "Request authorization from YouMagine"\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:231\r
+msgid "Paste token here"\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:237\r
+msgid ""\r
+"To share your designs on YouMagine\n"\r
+"you need an account on YouMagine.com\n"\r
+"and authorize Cura to access your account."\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:239\r
+msgid ""\r
+"This will open a browser window where you can\n"\r
+"authorize Cura to access your YouMagine account.\n"\r
+"You can revoke access at any time\n"\r
+"from YouMagine.com"\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:274\r
+msgid "Design name"\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:278\r
+msgid "Publish after upload"\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:279\r
+msgid "Share!"\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:287\r
+msgid "Add..."\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:289\r
+msgid "Webcam..."\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:297\r
+msgid ""\r
+"Directly publish the design after uploading.\n"\r
+"Without this check the design will not be public\n"\r
+"until you publish it yourself on YouMagine.com"\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:303\r
+msgid "Design name:"\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:305\r
+msgid "Description:"\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:307\r
+msgid "Category:"\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:309\r
+msgid "License:"\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:312\r
+msgid "Images:"\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:315\r
+msgid "Related design files:"\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:338\r
+msgid "The name cannot be empty"\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:338 Cura/gui/tools/youmagineGui.py:342\r
+msgid "New design error."\r
+msgstr ""\r
+\r
+#: Cura/gui/tools/youmagineGui.py:342\r
+msgid "The description cannot be empty"\r
+msgstr ""\r
+\r
+#: Cura/gui/util/openglGui.py:239\r
+msgid "An error has occurred during the 3D view drawing."\r
+msgstr ""\r
+\r
+#: Cura/gui/util/openglGui.py:246\r
+msgid "3D window error"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:153 Cura/util/profile.py:154 Cura/util/profile.py:155\r
+#: Cura/util/profile.py:179 Cura/util/profile.py:180 Cura/util/profile.py:182\r
+msgid "Quality"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:153\r
+msgid "Layer height (mm)"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:153\r
+msgid ""\r
+"Layer height in millimeters.\n"\r
+"This is the most important setting to determine the quality of your print. "\r
+"Normal quality prints are 0.1mm, high quality is 0.06mm. You can go up to "\r
+"0.25mm with an Ultimaker for very fast prints at low quality."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:154\r
+msgid "Shell thickness (mm)"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:154\r
+msgid ""\r
+"Thickness of the outside shell in the horizontal direction.\n"\r
+"This is used in combination with the nozzle size to define the number\n"\r
+"of perimeter lines and the thickness of those perimeter lines."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:155\r
+msgid "Enable retraction"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:155\r
+msgid ""\r
+"Retract the filament when the nozzle is moving over a none-printed area. "\r
+"Details about the retraction can be configured in the advanced tab."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:156 Cura/util/profile.py:157\r
+msgid "Fill"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:156\r
+msgid "Bottom/Top thickness (mm)"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:156\r
+msgid ""\r
+"This controls the thickness of the bottom and top layers, the amount of "\r
+"solid layers put down is calculated by the layer thickness and this value.\n"\r
+"Having this value a multiple of the layer thickness makes sense. And keep it "\r
+"near your wall thickness to make an evenly strong part."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:157\r
+msgid "Fill Density (%)"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:157\r
+msgid ""\r
+"This controls how densely filled the insides of your print will be. For a "\r
+"solid part use 100%, for an empty part use 0%. A value around 20% is usually "\r
+"enough.\n"\r
+"This won't effect the outside of the print and only adjusts how strong the "\r
+"part becomes."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:158\r
+msgid ""\r
+"The nozzle size is very important, this is used to calculate the line width "\r
+"of the infill, and used to calculate the amount of outside wall lines and "\r
+"thickness for the wall thickness you entered in the print settings."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:159 Cura/util/profile.py:160 Cura/util/profile.py:161\r
+#: Cura/util/profile.py:162 Cura/util/profile.py:163 Cura/util/profile.py:164\r
+msgid "Speed and Temperature"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:159\r
+msgid "Print speed (mm/s)"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:159\r
+msgid ""\r
+"Speed at which printing happens. A well adjusted Ultimaker can reach 150mm/"\r
+"s, but for good quality prints you want to print slower. Printing speed "\r
+"depends on a lot of factors. So you will be experimenting with optimal "\r
+"settings for this."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:160\r
+msgid "Printing temperature (C)"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:160 Cura/util/profile.py:161 Cura/util/profile.py:162\r
+#: Cura/util/profile.py:163\r
+msgid ""\r
+"Temperature used for printing. Set at 0 to pre-heat yourself.\n"\r
+"For PLA a value of 210C is usually used.\n"\r
+"For ABS a value of 230C or higher is required."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:161\r
+msgid "2nd nozzle temperature (C)"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:162\r
+msgid "3th nozzle temperature (C)"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:163\r
+msgid "4th nozzle temperature (C)"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:164\r
+msgid "Bed temperature (C)"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:164\r
+msgid ""\r
+"Temperature used for the heated printer bed. Set at 0 to pre-heat yourself."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:165 Cura/util/profile.py:166\r
+msgid "None"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:165\r
+msgid "Touching buildplate"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:165\r
+msgid "Everywhere"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:165 Cura/util/profile.py:166 Cura/util/profile.py:167\r
+#: Cura/util/profile.py:206 Cura/util/profile.py:207 Cura/util/profile.py:208\r
+msgid "Support"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:165\r
+msgid "Support type"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:165\r
+msgid ""\r
+"Type of support structure build.\n"\r
+"\"Touching buildplate\" is the most commonly used support setting.\n"\r
+"\n"\r
+"None does not do any support.\n"\r
+"Touching buildplate only creates support where the support structure will "\r
+"touch the build platform.\n"\r
+"Everywhere creates support even on top of parts of the model."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:166 Cura/util/profile.py:212\r
+msgid "Brim"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:166 Cura/util/profile.py:213 Cura/util/profile.py:214\r
+#: Cura/util/profile.py:215 Cura/util/profile.py:216 Cura/util/profile.py:217\r
+#: Cura/util/profile.py:218\r
+msgid "Raft"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:166\r
+msgid "Platform adhesion type"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:166\r
+msgid ""\r
+"Different options that help in preventing corners from lifting due to "\r
+"warping.\n"\r
+"Brim adds a single layer thick flat area around your object which is easy to "\r
+"cut off afterwards, and the recommended option.\n"\r
+"Raft adds a thick raster at below the object and a thin interface between "\r
+"this and your object.\n"\r
+"(Note that enabling the brim or raft disables the skirt)"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:167\r
+msgid "Both"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:167\r
+msgid "First extruder"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:167\r
+msgid "Second extruder"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:167\r
+msgid "Support dual extrusion"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:167\r
+msgid ""\r
+"Which extruder to use for support material, for break-away support you can "\r
+"use both extruders.\n"\r
+"But if one of the materials is more expensive then the other you could "\r
+"select an extruder to use for support material. This causes more extruder "\r
+"switches.\n"\r
+"You can also use the 2nd extruder for soluble support materials."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:168 Cura/util/profile.py:169 Cura/util/profile.py:170\r
+#: Cura/util/profile.py:171 Cura/util/profile.py:172\r
+msgid "Filament"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:168\r
+msgid "Diameter (mm)"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:168\r
+msgid ""\r
+"Diameter of your filament, as accurately as possible.\n"\r
+"If you cannot measure this value you will have to calibrate it, a higher "\r
+"number means less extrusion, a smaller number generates more extrusion."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:169\r
+msgid "Diameter2 (mm)"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:169\r
+msgid ""\r
+"Diameter of your filament for the 2nd nozzle. Use 0 to use the same diameter "\r
+"as for nozzle 1."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:170\r
+msgid "Diameter3 (mm)"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:170\r
+msgid ""\r
+"Diameter of your filament for the 3th nozzle. Use 0 to use the same diameter "\r
+"as for nozzle 1."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:171\r
+msgid "Diameter4 (mm)"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:171\r
+msgid ""\r
+"Diameter of your filament for the 4th nozzle. Use 0 to use the same diameter "\r
+"as for nozzle 1."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:172\r
+msgid "Flow (%)"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:172\r
+msgid ""\r
+"Flow compensation, the amount of material extruded is multiplied by this "\r
+"value"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:173 Cura/util/profile.py:174 Cura/util/profile.py:175\r
+#: Cura/util/profile.py:176 Cura/util/profile.py:177 Cura/util/profile.py:178\r
+msgid "Retraction"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:173\r
+msgid "Speed (mm/s)"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:173\r
+msgid ""\r
+"Speed at which the filament is retracted, a higher retraction speed works "\r
+"better. But a very high retraction speed can lead to filament grinding."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:174\r
+msgid "Distance (mm)"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:174\r
+msgid ""\r
+"Amount of retraction, set at 0 for no retraction at all. A value of 4.5mm "\r
+"seems to generate good results."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:175\r
+msgid "Dual extrusion switch amount (mm)"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:175\r
+msgid ""\r
+"Amount of retraction when switching nozzle with dual-extrusion, set at 0 for "\r
+"no retraction at all. A value of 16.0mm seems to generate good results."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:176\r
+msgid "Minimum travel (mm)"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:176\r
+msgid ""\r
+"Minimum amount of travel needed for a retraction to happen at all. To make "\r
+"sure you do not get a lot of retractions in a small area."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:177\r
+msgid "Enable combing"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:177\r
+msgid ""\r
+"Combing is the act of avoiding holes in the print for the head to travel "\r
+"over. If combing is disabled the printer head moves straight from the start "\r
+"point to the end point and it will always retract."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:178\r
+msgid "Minimal extrusion before retracting (mm)"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:178\r
+msgid ""\r
+"The minimal amount of extrusion that needs to be done before retracting "\r
+"again if a retraction needs to happen before this minimal is reached the "\r
+"retraction is ignored.\n"\r
+"This avoids retraction a lot on the same piece of filament which flattens "\r
+"the filament and causes grinding issues."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:179\r
+msgid "Initial layer thickness (mm)"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:179\r
+msgid ""\r
+"Layer thickness of the bottom layer. A thicker bottom layer makes sticking "\r
+"to the bed easier. Set to 0.0 to have the bottom layer thickness the same as "\r
+"the other layers."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:180\r
+msgid "Cut off object bottom (mm)"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:180\r
+msgid ""\r
+"Sinks the object into the platform, this can be used for objects that do not "\r
+"have a flat bottom and thus create a too small first layer."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:182\r
+msgid "Dual extrusion overlap (mm)"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:182\r
+msgid ""\r
+"Add a certain amount of overlapping extrusion on dual-extrusion prints. This "\r
+"bonds the different colors better together."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:183\r
+msgid "Travel speed (mm/s)"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:183\r
+msgid ""\r
+"Speed at which travel moves are done, a high quality build Ultimaker can "\r
+"reach speeds of 250mm/s. But some machines might miss steps then."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:184\r
+msgid "Bottom layer speed (mm/s)"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:184\r
+msgid ""\r
+"Print speed for the bottom layer, you want to print the first layer slower "\r
+"so it sticks better to the printer bed."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:185\r
+msgid "Infill speed (mm/s)"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:185\r
+msgid ""\r
+"Speed at which infill parts are printed. If set to 0 then the print speed is "\r
+"used for the infill. Printing the infill faster can greatly reduce printing, "\r
+"but this can negatively effect print quality.."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:186 Cura/util/profile.py:187 Cura/util/profile.py:194\r
+#: Cura/util/profile.py:195 Cura/util/profile.py:196 Cura/util/profile.py:197\r
+#: Cura/util/profile.py:198\r
+msgid "Cool"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:186\r
+msgid "Minimal layer time (sec)"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:186\r
+msgid ""\r
+"Minimum time spend in a layer, gives the layer time to cool down before the "\r
+"next layer is put on top. If the layer will be placed down too fast the "\r
+"printer will slow down to make sure it has spend at least this amount of "\r
+"seconds printing this layer."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:187\r
+msgid "Enable cooling fan"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:187\r
+msgid ""\r
+"Enable the cooling fan during the print. The extra cooling from the cooling "\r
+"fan is essential during faster prints."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:189\r
+msgid "Line count"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:189\r
+msgid ""\r
+"The skirt is a line drawn around the object at the first layer. This helps "\r
+"to prime your extruder, and to see if the object fits on your platform.\n"\r
+"Setting this to 0 will disable the skirt. Multiple skirt lines can help "\r
+"priming your extruder better for small objects."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:190\r
+msgid "Start distance (mm)"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:190\r
+msgid ""\r
+"The distance between the skirt and the first layer.\n"\r
+"This is the minimal distance, multiple skirt lines will be put outwards from "\r
+"this distance."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:191\r
+msgid "Minimal length (mm)"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:191\r
+msgid ""\r
+"The minimal length of the skirt, if this minimal length is not reached it "\r
+"will add more skirt lines to reach this minimal lenght.\n"\r
+"Note: If the line count is set to 0 this is ignored."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:194\r
+msgid "Fan on layer number"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:194\r
+msgid ""\r
+"The layer at which the fan is turned on. The first layer is layer 0. The "\r
+"first layer can stick better if you turn on the fan on, on the 2nd layer."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:195\r
+msgid "Fan speed min (%)"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:195\r
+msgid ""\r
+"When the fan is turned on, it is enabled at this speed setting. If cool "\r
+"slows down the layer, the fan is adjusted between the min and max speed. "\r
+"Minimal fan speed is used if the layer is not slowed down due to cooling."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:196\r
+msgid "Fan speed max (%)"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:196\r
+msgid ""\r
+"When the fan is turned on, it is enabled at this speed setting. If cool "\r
+"slows down the layer, the fan is adjusted between the min and max speed. "\r
+"Maximal fan speed is used if the layer is slowed down due to cooling by more "\r
+"than 200%."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:197\r
+msgid "Minimum speed (mm/s)"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:197\r
+msgid ""\r
+"The minimal layer time can cause the print to slow down so much it starts to "\r
+"ooze. The minimal feedrate protects against this. Even if a print gets slown "\r
+"down it will never be slower than this minimal speed."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:198\r
+msgid "Cool head lift"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:198\r
+msgid ""\r
+"Lift the head if the minimal speed is hit because of cool slowdown, and wait "\r
+"the extra time so the minimal layer time is always hit."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:203 Cura/util/profile.py:204 Cura/util/profile.py:205\r
+msgid "Infill"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:203\r
+msgid "Solid infill top"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:203\r
+msgid ""\r
+"Create a solid top surface, if set to false the top is filled with the fill "\r
+"percentage. Useful for cups/vases."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:204\r
+msgid "Solid infill bottom"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:204\r
+msgid ""\r
+"Create a solid bottom surface, if set to false the bottom is filled with the "\r
+"fill percentage. Useful for buildings."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:205\r
+msgid "Infill overlap (%)"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:205\r
+msgid ""\r
+"Amount of overlap between the infill and the walls. There is a slight "\r
+"overlap with the walls and the infill so the walls connect firmly to the "\r
+"infill."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:206\r
+msgid "Fill amount (%)"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:206\r
+#, python-format\r
+msgid ""\r
+"Amount of infill structure in the support material, less material gives "\r
+"weaker support which is easier to remove. 20% seems to be a good average."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:207\r
+msgid "Distance X/Y (mm)"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:207\r
+msgid ""\r
+"Distance of the support material from the print, in the X/Y directions.\n"\r
+"0.7mm gives a nice distance from the print so the support does not stick to "\r
+"the print."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:208\r
+msgid "Distance Z (mm)"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:208\r
+msgid ""\r
+"Distance from the top/bottom of the support to the print. A small gap here "\r
+"makes it easier to remove the support but makes the print a bit uglier.\n"\r
+"0.15mm gives a good seperation of the support material."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:212\r
+msgid "Brim line amount"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:212\r
+msgid ""\r
+"The amount of lines used for a brim, more lines means a larger brim which "\r
+"sticks better, but this also makes your effective print area smaller."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:213\r
+msgid "Extra margin (mm)"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:213\r
+msgid ""\r
+"If the raft is enabled, this is the extra raft area around the object which "\r
+"is also rafted. Increasing this margin will create a stronger raft while "\r
+"using more material and leaving less are for your print."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:214\r
+msgid "Line spacing (mm)"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:214\r
+msgid ""\r
+"When you are using the raft this is the distance between the centerlines of "\r
+"the raft line."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:215\r
+msgid "Base thickness (mm)"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:215\r
+msgid ""\r
+"When you are using the raft this is the thickness of the base layer which is "\r
+"put down."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:216\r
+msgid "Base line width (mm)"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:216\r
+msgid ""\r
+"When you are using the raft this is the width of the base layer lines which "\r
+"are put down."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:217\r
+msgid "Interface thickness (mm)"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:217\r
+msgid ""\r
+"When you are using the raft this is the thickness of the interface layer "\r
+"which is put down."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:218\r
+msgid "Interface line width (mm)"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:218\r
+msgid ""\r
+"When you are using the raft this is the width of the interface layer lines "\r
+"which are put down."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:220 Cura/util/profile.py:221 Cura/util/profile.py:222\r
+#: Cura/util/profile.py:223\r
+msgid "Fix horrible"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:220\r
+msgid "Combine everything (Type-A)"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:220 Cura/util/profile.py:221\r
+msgid ""\r
+"This expert option adds all parts of the model together. The result is "\r
+"usually that internal cavities disappear. Depending on the model this can be "\r
+"intended or not. Enabling this option is at your own risk. Type-A is "\r
+"depended on the model normals and tries to keep some internal holes intact. "\r
+"Type-B ignores all internal holes and only keeps the outside shape per layer."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:221\r
+msgid "Combine everything (Type-B)"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:222\r
+msgid "Keep open faces"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:222\r
+msgid ""\r
+"This expert option keeps all the open bits of the model intact. Normally "\r
+"Cura tries to stitch up small holes and remove everything with big holes, "\r
+"but this option keeps bits that are not properly part of anything and just "\r
+"goes with whatever it is left. This option is usually not what you want, but "\r
+"it might enable you to slice models otherwise failing to produce proper "\r
+"paths.\n"\r
+"As with all \"Fix horrible\" options, results may vary and use at your own "\r
+"risk."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:223\r
+msgid "Extensive stitching"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:223\r
+msgid ""\r
+"Extrensive stitching tries to fix up open holes in the model by closing the "\r
+"hole with touching polygons. This algorthm is quite expensive and could "\r
+"introduce a lot of processing time.\n"\r
+"As with all \"Fix horrible\" options, results may vary and use at your own "\r
+"risk."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:338\r
+msgid "Save profile on slice"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:338\r
+msgid ""\r
+"When slicing save the profile as [stl_file]_profile.ini next to the model."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:339\r
+msgid "Cost (price/kg)"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:339\r
+msgid "Cost of your filament per kg, to estimate the cost of the final print."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:340\r
+msgid "Cost (price/m)"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:340\r
+msgid ""\r
+"Cost of your filament per meter, to estimate the cost of the final print."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:341\r
+msgid "Auto detect SD card drive"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:341\r
+msgid ""\r
+"Auto detect the SD card. You can disable this because on some systems "\r
+"external hard-drives or USB sticks are detected as SD card."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:342\r
+msgid "Check for updates"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:342\r
+msgid "Check for newer versions of Cura on startup"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:343\r
+msgid "Send usage statistics"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:343\r
+msgid "Submit anonymous usage information to improve next versions of Cura"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:345\r
+msgid "Density (kg/m3)"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:345\r
+msgid ""\r
+"Weight of the filament per m3. Around 1240 for PLA. And around 1040 for ABS. "\r
+"This value is used to estimate the weight if the filament used for the print."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:348\r
+msgid "Model colour"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:349\r
+msgid "Model colour (2)"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:350\r
+msgid "Model colour (3)"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:351\r
+msgid "Model colour (4)"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:362\r
+msgid "Maximum width (mm)"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:362 Cura/util/profile.py:363 Cura/util/profile.py:364\r
+msgid "Size of the machine in mm"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:363\r
+msgid "Maximum depth (mm)"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:364\r
+msgid "Maximum height (mm)"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:367\r
+msgid ""\r
+"If you have an heated bed, this enabled heated bed settings (requires "\r
+"restart)"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:368\r
+msgid "GCode Flavor"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:368\r
+msgid ""\r
+"Flavor of generated GCode.\n"\r
+"RepRap is normal 5D GCode which works on Marlin/Sprinter based firmwares.\n"\r
+"UltiGCode is a variation of the RepRap GCode which puts more settings in the "\r
+"machine instead of the slicer."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:369\r
+msgid "Extruder count"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:369\r
+msgid "Amount of extruders in your machine."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:370 Cura/util/profile.py:372 Cura/util/profile.py:374\r
+msgid "Offset X"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:370 Cura/util/profile.py:371\r
+msgid "The offset of your secondary extruder compared to the primary."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:371 Cura/util/profile.py:373 Cura/util/profile.py:375\r
+msgid "Offset Y"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:372 Cura/util/profile.py:373\r
+msgid "The offset of your tertiary extruder compared to the primary."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:374 Cura/util/profile.py:375\r
+msgid "The offset of your forth extruder compared to the primary."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:376\r
+msgid "E-Steps per 1mm filament"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:376\r
+msgid ""\r
+"Amount of steps per mm filament extrusion. If set to 0 then this value is "\r
+"ignored and the value in your firmware is used."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:377\r
+msgid "Serial port"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:377\r
+msgid "Serial port to use for communication with the printer"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:379\r
+msgid "Baudrate"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:379\r
+msgid ""\r
+"Speed of the serial port communication\n"\r
+"Needs to match your firmware settings\n"\r
+"Common values are 250000, 115200, 57600"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:382\r
+msgid "Head size towards X min (mm)"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:382\r
+msgid ""\r
+"The head size when printing multiple objects, measured from the tip of the "\r
+"nozzle towards the outer part of the head. 75mm for an Ultimaker if the fan "\r
+"is on the left side."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:383\r
+msgid "Head size towards Y min (mm)"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:383 Cura/util/profile.py:384\r
+msgid ""\r
+"The head size when printing multiple objects, measured from the tip of the "\r
+"nozzle towards the outer part of the head. 18mm for an Ultimaker if the fan "\r
+"is on the left side."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:384\r
+msgid "Head size towards X max (mm)"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:385\r
+msgid "Head size towards Y max (mm)"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:385\r
+msgid ""\r
+"The head size when printing multiple objects, measured from the tip of the "\r
+"nozzle towards the outer part of the head. 35mm for an Ultimaker if the fan "\r
+"is on the left side."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:386\r
+msgid "Printer gantry height (mm)"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:386\r
+msgid ""\r
+"The height of the gantry holding up the printer head. If an object is higher "\r
+"then this then you cannot print multiple objects one for one. 60mm for an "\r
+"Ultimaker."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:388\r
+#, python-format\r
+msgid "More flow then 150% is rare and usually not recommended."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:389\r
+#, python-format\r
+msgid "More flow then 50% is rare and usually not recommended."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:390\r
+#, python-format\r
+msgid ""\r
+"Thicker layers then %.2fmm (80%% nozzle size) usually give bad results and "\r
+"are not recommended."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:392\r
+msgid ""\r
+"It is highly unlikely that your machine can achieve a printing speed above "\r
+"150mm/s"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:394 Cura/util/profile.py:395 Cura/util/profile.py:396\r
+#: Cura/util/profile.py:397\r
+msgid "Temperatures above 260C could damage your machine, be careful!"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:398 Cura/util/profile.py:399 Cura/util/profile.py:400\r
+#: Cura/util/profile.py:401\r
+msgid ""\r
+"Are you sure your filament is that thick? Normal filament is around 3mm or "\r
+"1.75mm."\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:402\r
+msgid ""\r
+"It is highly unlikely that your machine can achieve a travel speed above "\r
+"300mm/s"\r
+msgstr ""\r
+\r
+#: Cura/util/profile.py:403\r
+#, python-format\r
+msgid ""\r
+"A bottom layer of more then %.2fmm (3/4 nozzle size) usually give bad "\r
+"results and is not recommended."\r
+msgstr ""\r