2017-01-02 |
Ian Jackson | sewing-table: fold in InterlockLobeCore (nfc)
|
commit | commitdiff | tree |
2017-01-02 |
Ian Jackson | sewing-table: remove obsolete InterlockLobe (nfc)
|
commit | commitdiff | tree |
2017-01-02 |
Ian Jackson | sewing-table: Test pieces: use InterlockEdge, not Lobe...
|
commit | commitdiff | tree |
2017-01-02 |
Ian Jackson | sewing-table: InterlockEdge support nlobes=1
|
commit | commitdiff | tree |
2017-01-02 |
Ian Jackson | Revert "sewing-table: InterlockEdge: make nlobes=2...
|
commit | commitdiff | tree |
2017-01-02 |
Ian Jackson | sewing-table: InterlockEdge: make nlobes=2 constant
|
commit | commitdiff | tree |
2017-01-02 |
Ian Jackson | sewing-table: Introduce InterlockEdge
|
commit | commitdiff | tree |
2017-01-02 |
Ian Jackson | sewing-table: InterlockLobe*: Move negative-dependent...
|
commit | commitdiff | tree |
2017-01-02 |
Ian Jackson | sewing-table: Start on real tiles
|
commit | commitdiff | tree |
2017-01-02 |
Ian Jackson | sewing-table: Rename Demo to TestDemo
|
commit | commitdiff | tree |
2017-01-02 |
Ian Jackson | sewing-table: rename InterlockLobe* (from Interlock...
|
commit | commitdiff | tree |
2017-01-02 |
Ian Jackson | sewing-table: Fix CommitID in TileBase
|
commit | commitdiff | tree |
2017-01-02 |
Ian Jackson | sewing-table: Abolish InterlockNegative in favour of...
|
commit | commitdiff | tree |
2017-01-02 |
Ian Jackson | sewing-table: make corners be cycles (nfc)
|
commit | commitdiff | tree |
2017-01-02 |
Ian Jackson | sewing-table: introduce InterlockPlan
|
commit | commitdiff | tree |
2017-01-02 |
Ian Jackson | Merge branch 'master' of chiark:/u/ianmdlvl/reprap...
|
commit | commitdiff | tree |
2017-01-02 |
Ian Jackson | Makefile: remove other job.* files when installing...
|
commit | commitdiff | tree |
2017-01-02 |
Ian Jackson | filamentspool: deeper cups (hope to avoid tangles)...
|
commit | commitdiff | tree |
2017-01-01 |
Ian Jackson | sewing-table: wip change to edge referent (holes =...
|
commit | commitdiff | tree |
2017-01-01 |
Ian Jackson | sewing-table: wip change to edge referent (holes =...
|
commit | commitdiff | tree |
2017-01-01 |
Ian Jackson | sewing-table: make Demo a toplevel
|
commit | commitdiff | tree |
2017-01-01 |
Ian Jackson | sewing-table: more echoes
|
commit | commitdiff | tree |
2017-01-01 |
Ian Jackson | sewing-table: introduce a concat (nfc)
|
commit | commitdiff | tree |
2017-01-01 |
Ian Jackson | sewing-table: introduce a concat (nfc)
|
commit | commitdiff | tree |
2017-01-01 |
Ian Jackson | sewing-table: introduce a concat (nfc)
|
commit | commitdiff | tree |
2017-01-01 |
Ian Jackson | sewing-table: Swap elements of thehd (nfc)
|
commit | commitdiff | tree |
2017-01-01 |
Ian Jackson | Merge branch 'master' of chiark:/u/ianmdlvl/reprap...
|
commit | commitdiff | tree |
2017-01-01 |
Ian Jackson | filamentspool: deeper cups (hope to avoid tangles)
|
commit | commitdiff | tree |
2017-01-01 |
Ian Jackson | filamentspool: delete old todo list
|
commit | commitdiff | tree |
2016-12-30 |
Ian Jackson | sewing-table: finish commitid
|
commit | commitdiff | tree |
2016-12-30 |
Ian Jackson | sewing-table: commitid wip
|
commit | commitdiff | tree |
2016-12-30 |
Ian Jackson | sewing-table: interlocks sorted
|
commit | commitdiff | tree |
2016-12-30 |
Ian Jackson | sewing-table: interlock
|
commit | commitdiff | tree |
2016-12-30 |
Ian Jackson | sewing-table: wip interlock
|
commit | commitdiff | tree |
2016-12-30 |
Ian Jackson | sewing-table: introduce INREFFRAME_EDGE (nfc)
|
commit | commitdiff | tree |
2016-12-30 |
Ian Jackson | sewing-table: introduce INREFFRAME
|
commit | commitdiff | tree |
2016-12-30 |
Ian Jackson | sewing-table: before make refframe include
|
commit | commitdiff | tree |
2016-12-30 |
Ian Jackson | sewing-table: TestPiece1
|
commit | commitdiff | tree |
2016-12-30 |
Ian Jackson | sewing-table: RoundEdge could not cope with identical...
|
commit | commitdiff | tree |
2016-12-30 |
Ian Jackson | sewing-table: before RoundEdge cope with identical...
|
commit | commitdiff | tree |
2016-12-30 |
Ian Jackson | sewing-table: before reorge RoundEdge
|
commit | commitdiff | tree |
2016-12-28 |
Ian Jackson | Makefile: Add some $(PLAY)
|
commit | commitdiff | tree |
2016-11-16 |
Ian Jackson | lock-inframe-bracket: notes re print
|
commit | commitdiff | tree |
2016-11-16 |
Ian Jackson | lock-inframe-bracket: adjustments
|
commit | commitdiff | tree |
2016-11-16 |
Ian Jackson | lock-inframe-bracket: fix syntax error
|
commit | commitdiff | tree |
2016-10-04 |
Ian Jackson | bike-stalk-led-mount: commitids
|
commit | commitdiff | tree |
2016-10-04 |
Ian Jackson | bike-stalk-led-mount: toplevels
|
commit | commitdiff | tree |
2016-10-04 |
Ian Jackson | bike-stalk-led-mount: wip
|
commit | commitdiff | tree |
2016-09-07 |
Ian Jackson | lock-inframe-bracket: Add ref to Wolfram
|
commit | commitdiff | tree |
2016-09-01 |
Ian Jackson | lock-inframe-bracket: From mk2 v2: increase back_gap...
|
commit | commitdiff | tree |
2016-09-01 |
Ian Jackson | lock-inframe-bracket: Provide tube_rear_extra_th
|
commit | commitdiff | tree |
2016-09-01 |
Ian Jackson | lock-inframe-bracket: Increase main_th
|
commit | commitdiff | tree |
2016-09-01 |
Ian Jackson | lock-inframe-bracket: Increase back_gap
|
commit | commitdiff | tree |
2016-09-01 |
Ian Jackson | lock-inframe-bracket: Thicken backflange
|
commit | commitdiff | tree |
2016-09-01 |
Ian Jackson | lock-inframe-bracket: Adjust join_cr
|
commit | commitdiff | tree |
2016-09-01 |
Ian Jackson | lock-inframe-bracket: JoinCirc -> JoinCircs (nfc)
|
commit | commitdiff | tree |
2016-09-01 |
Ian Jackson | lock-inframe-bracket: MainPlan: add JoinCirc
|
commit | commitdiff | tree |
2016-09-01 |
Ian Jackson | lock-inframe-bracket: MainPlan: reorg to make cutouts...
|
commit | commitdiff | tree |
2016-08-28 |
Ian Jackson | flyscreen-handle: from v3: add Ribbles to bottom
|
commit | commitdiff | tree |
2016-08-28 |
Ian Jackson | flyscreen-handle: from v3: break out Ribbles (nfc)
|
commit | commitdiff | tree |
2016-08-28 |
Ian Jackson | flyscreen-handle: from v3: extend bottom
|
commit | commitdiff | tree |
2016-08-28 |
Ian Jackson | flyscreen-handle: from v3: Prep for multiple holes...
|
commit | commitdiff | tree |
2016-08-28 |
Ian Jackson | flyscreen-handle: looks good, make final
|
commit | commitdiff | tree |
2016-08-27 |
Ian Jackson | flyscreen-handle: kit for v3 test
|
commit | commitdiff | tree |
2016-08-27 |
Ian Jackson | flyscreen-handle: from v2 test
|
commit | commitdiff | tree |
2016-08-27 |
Ian Jackson | flyscreen-handle: kits
|
commit | commitdiff | tree |
2016-08-27 |
Ian Jackson | flyscreen-handle: separate out test
|
commit | commitdiff | tree |
2016-08-27 |
Ian Jackson | flyscreen-handle: bottom strap too
|
commit | commitdiff | tree |
2016-08-27 |
Ian Jackson | flyscreen-handle: from v1, adj protrh
|
commit | commitdiff | tree |
2016-08-27 |
Ian Jackson | flyscreen-handle: from v1, adj openingedge
|
commit | commitdiff | tree |
2016-08-27 |
Ian Jackson | flyscreen-handle: bot adj cutout is better
|
commit | commitdiff | tree |
2016-08-27 |
Ian Jackson | flyscreen-handle: wip cutout
|
commit | commitdiff | tree |
2016-08-27 |
Ian Jackson | flyscreen-handle: wip straps
|
commit | commitdiff | tree |
2016-08-27 |
Ian Jackson | flyscreen-handle: Before P9 strap
|
commit | commitdiff | tree |
2016-08-27 |
Ian Jackson | flyscreen-handle: Ribbles
|
commit | commitdiff | tree |
2016-08-27 |
Ian Jackson | flyscreen-handle: Make top side flat
|
commit | commitdiff | tree |
2016-08-27 |
Ian Jackson | flyscreen-handle: New inadj approach, fix undef
|
commit | commitdiff | tree |
2016-08-27 |
Ian Jackson | flyscreen-handle: New inadj approach, use same P7 always
|
commit | commitdiff | tree |
2016-08-27 |
Ian Jackson | flyscreen-handle: New inadj approach
|
commit | commitdiff | tree |
2016-08-27 |
Ian Jackson | flyscreen-handle: LeverSects wip, before bodge P3b
|
commit | commitdiff | tree |
2016-08-27 |
Ian Jackson | flyscreen-handle: LeverSects wip, before Test
|
commit | commitdiff | tree |
2016-08-27 |
Ian Jackson | flyscreen-handle: LeverSects wip, before Test and before...
|
commit | commitdiff | tree |
2016-08-27 |
Ian Jackson | flyscreen-handle: LeverSects wip
|
commit | commitdiff | tree |
2016-08-27 |
Ian Jackson | flyscreen-handle: wip, Ps etc
|
commit | commitdiff | tree |
2016-08-27 |
Ian Jackson | flyscreen-handle: wip, Ps etc
|
commit | commitdiff | tree |
2016-08-27 |
Ian Jackson | flyscreen-handle: wip, Q0 etc
|
commit | commitdiff | tree |
2016-08-27 |
Ian Jackson | flyscreen-handle: remeasure
|
commit | commitdiff | tree |
2016-08-27 |
Ian Jackson | flyscreen-handle: start rewrite
|
commit | commitdiff | tree |
2016-08-26 |
Ian Jackson | flyscreen-handle: peg bases from v10
|
commit | commitdiff | tree |
2016-08-26 |
Ian Jackson | flyscreen-handle: adjustments from v10
|
commit | commitdiff | tree |
2016-08-26 |
Ian Jackson | flyscreen-handle: adjustments for strength (again)
|
commit | commitdiff | tree |
2016-08-26 |
Ian Jackson | flyscreen-handle: adjustments for strength
|
commit | commitdiff | tree |
2016-08-26 |
Ian Jackson | flyscreen-handle: introduce top_w (nfc)
|
commit | commitdiff | tree |
2016-08-26 |
Ian Jackson | flyscreen-handle: do not make InsertSection get in...
|
commit | commitdiff | tree |
2016-08-26 |
Ian Jackson | flyscreen-handle: PegTestKit
|
commit | commitdiff | tree |
2016-08-26 |
Ian Jackson | flyscreen-handle: Peg, wip, PegSectionSlice (not much...
|
commit | commitdiff | tree |
2016-08-26 |
Ian Jackson | flyscreen-handle: Peg, wip
|
commit | commitdiff | tree |
2016-08-26 |
Ian Jackson | flyscreen-handle: tapered peg section
|
commit | commitdiff | tree |
2016-08-26 |
Ian Jackson | Revert "flyscreen-handle: wip shorter peg"
|
commit | commitdiff | tree |
2016-08-26 |
Ian Jackson | flyscreen-handle: wip shorter peg
|
commit | commitdiff | tree |
next |