From d3895f886c913541dc63c22605b648498ed6cc8c Mon Sep 17 00:00:00 2001 From: daid303 Date: Fri, 8 Mar 2013 10:30:52 +0100 Subject: [PATCH] Add tooltip for object bottom cut-off. --- Cura/gui/mainWindow.py | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Cura/gui/mainWindow.py b/Cura/gui/mainWindow.py index 7f108740..c9507832 100644 --- a/Cura/gui/mainWindow.py +++ b/Cura/gui/mainWindow.py @@ -626,7 +626,7 @@ class normalSettingsPanel(configBase.configPanelBase): c = configBase.SettingRow(right, "Initial layer thickness (mm)", 'bottom_thickness', '0.0', 'Layer thickness of the bottom layer. A thicker bottom layer makes sticking to the bed easier. Set to 0.0 to have the bottom layer thickness the same as the other layers.') validators.validFloat(c, 0.0) validators.warningAbove(c, lambda : (float(profile.getProfileSetting('nozzle_size')) * 3.0 / 4.0), "A bottom layer of more then %.2fmm (3/4 nozzle size) usually give bad results and is not recommended.") - c = configBase.SettingRow(right, "Cut off object bottom (mm)", 'object_sink', 0.05, '...') + c = configBase.SettingRow(right, "Cut off object bottom (mm)", 'object_sink', 0.05, 'Sinks the object into the platform, this can be used for objects that do not have a flat bottom and thus create a too small first layer.') validators.validFloat(c, 0.0) configBase.settingNotify(c, lambda : self.GetParent().GetParent().GetParent().preview3d.Refresh()) c = configBase.SettingRow(right, "Duplicate outlines", 'enable_skin', False, 'Skin prints the outer lines of the prints twice, each time with half the thickness. This gives the illusion of a higher print quality.') -- 2.30.2