From c70edc80de66d3135a08dec519e178bad8b56825 Mon Sep 17 00:00:00 2001 From: Bill Bumgarner Date: Sun, 11 Mar 2012 11:26:43 -0700 Subject: [PATCH] update format --- README | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/README b/README index e087e1a9..20f2b209 100644 --- a/README +++ b/README @@ -11,11 +11,7 @@ SkeinPyPy: A easy to use program for slicing STL files using SkeinForge. SkeinPyPy can also visualize the 3D models in a variety of ways. - On first run, SkeinPyPy will ask to go through a set of calibration steps that will perform a series of operations on your 3D printer. - One of those steps involves extruding a bit of filament where the filament is initially nearly fully extracted. As such, it you will - probably need to run Pronterface first, heat up the extruder enough to be able to extract the filament and then use the Pronterface - interface to reverse the extruder motor until the filament is at the right position (specifically, until the filament end is even with - where the Bowden tube leaves the extuder motor assembly, on an Ultimaker). + On first run, SkeinPyPy will ask to go through a set of calibration steps that will perform a series of operations on your 3D printer. One of those steps involves extruding a bit of filament where the filament is initially nearly fully extracted. As such, it you will probably need to run Pronterface first, heat up the extruder enough to be able to extract the filament and then use the Pronterface interface to reverse the extruder motor until the filament is at the right position (specifically, until the filament end is even with where the Bowden tube leaves the extuder motor assembly, on an Ultimaker). ======== BUILDING -- 2.30.2