From acda8db47d2559d5620fd8eeea284880d2719cb4 Mon Sep 17 00:00:00 2001
From: Ian Jackson <ijackson@chiark.greenend.org.uk>
Date: Fri, 10 Aug 2012 17:49:22 +0100
Subject: [PATCH] Refresh of homeaxis-function

---
 Marlin/Marlin.pde | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/Marlin/Marlin.pde b/Marlin/Marlin.pde
index bb6c5ae..36118f8 100644
--- a/Marlin/Marlin.pde
+++ b/Marlin/Marlin.pde
@@ -582,7 +582,7 @@ static void homeaxis(int axis) {
 #define HOMEAXIS_DO_BIT(LETTER) \
   ((LETTER##_MIN_PIN > -1 && LETTER##_HOME_DIR==-1) || (LETTER##_MAX_PIN > -1 && LETTER##_HOME_DIR==1) ? 1 << LETTER##_AXIS : 0)
 
-  static PROGMEM const unsigned char doaxis =
+  const unsigned char doaxis =
     HOMEAXIS_DO_BIT(X) | 
     HOMEAXIS_DO_BIT(Y) |
     HOMEAXIS_DO_BIT(Z);
@@ -590,18 +590,18 @@ static void homeaxis(int axis) {
   if (doaxis & (1<<axis)) {
     current_position[axis] = 0;
     plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]);
-    destination[axis] = 1.5 * XYZ_CONFIG(max_length,axis) * XYZ_CONFIG(home_dir,axis);
+    destination[axis] = 1.5 * max_length(axis) * home_dir(axis);
     feedrate = homing_feedrate[axis];
     plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate/60, active_extruder);
     st_synchronize();
    
     current_position[axis] = 0;
     plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]);
-    destination[axis] = -XYZ_CONFIG(home_retract_mm,axis) * XYZ_CONFIG(home_dir,axis);
+    destination[axis] = -home_retract_mm(axis) * home_dir(axis);
     plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate/60, active_extruder);
     st_synchronize();
    
-    destination[axis] = 2*home_retract_mm[axis] * home_dir[axis];
+    destination[axis] = 2*home_retract_mm(axis) * home_dir(axis);
     feedrate = homing_feedrate[axis]/2 ; 
     plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate/60, active_extruder);
     st_synchronize();
-- 
2.30.2