From 62113fa98b1f9fc06c8546afac1159c198e69c80 Mon Sep 17 00:00:00 2001 From: Steven Abadie Date: Wed, 17 Dec 2014 18:58:06 -0700 Subject: [PATCH] Quick print profiles updated for PLA Mini profiles. --- Cura/gui/simpleMode.py | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/Cura/gui/simpleMode.py b/Cura/gui/simpleMode.py index 758db3ba..9789372d 100644 --- a/Cura/gui/simpleMode.py +++ b/Cura/gui/simpleMode.py @@ -193,7 +193,7 @@ G90 ; absolute positioning ;{profile_string} """) if self.printMaterialHIPS.GetValue(): - put('print_bed_temperature', '100') + put('print_bed_temperature', '97') if self.printTypeLow.GetValue(): put('layer_height', '0.38') put('print_speed', '85') @@ -213,7 +213,7 @@ G90 ; absolute positioning put('inset0_speed', '20') put('insetx_speed', '25') if self.printMaterialABS.GetValue(): - put('print_bed_temperature', '110') + put('print_bed_temperature', '104') if self.printTypeLow.GetValue(): put('layer_height', '0.38') put('print_speed', '85') @@ -233,18 +233,18 @@ G90 ; absolute positioning put('inset0_speed', '30') put('insetx_speed', '35') elif self.printMaterialPLA.GetValue(): - put('print_temperature', '200') - put('print_bed_temperature', '65') + put('print_temperature', '205') + put('print_bed_temperature', '60') put('solid_layer_thickness', '1') put('print_speed', '50') put('retraction_amount', '1.5') - put('bottom_layer_speed', '20') - put('infill_speed', '55') - put('inset0_speed', '45') - put('insetx_speed', '50') + put('bottom_layer_speed', '15') + put('infill_speed', '40') + put('inset0_speed', '30') + put('insetx_speed', '35') put('cool_min_layer_time', '20') - put('fan_full_height', '1') - put('fan_speed', '100') + put('fan_full_height', '0.5') + put('fan_speed', '75') put('fan_speed_max', '100') put('start.gcode', """;This Gcode has been generated specifically for the LulzBot Mini ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} -- 2.30.2