chiark / gitweb /
Ian Jackson [Sat, 8 Feb 2020 21:53:59 +0000 (21:53 +0000)]
fairphone-battery-case: revert for test
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sat, 8 Feb 2020 21:53:54 +0000 (21:53 +0000)]
fairphone-battery-case: toplevels
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sat, 8 Feb 2020 21:51:52 +0000 (21:51 +0000)]
fairphone-battery-case: wip
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sat, 8 Feb 2020 21:48:25 +0000 (21:48 +0000)]
fairphone-battery-case: wip
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sat, 8 Feb 2020 21:35:26 +0000 (21:35 +0000)]
fairphone-battery-case: wip
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sat, 8 Feb 2020 21:34:14 +0000 (21:34 +0000)]
fairphone-battery-case: wip
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sat, 8 Feb 2020 21:27:20 +0000 (21:27 +0000)]
fairphone-battery-case: wip
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Wed, 29 Jan 2020 09:53:43 +0000 (09:53 +0000)]
lock-inframe-bracket: adjust gap slightly
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Tue, 28 Jan 2020 23:21:12 +0000 (23:21 +0000)]
lock-inframe-bracket: strengthening adjustments
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Thu, 28 Nov 2019 16:11:50 +0000 (16:11 +0000)]
hole-repair-
20191117: adjustments from email
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Thu, 28 Nov 2019 16:11:11 +0000 (16:11 +0000)]
hole-repair-
20191117: adjustments from email
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 17 Nov 2019 22:19:14 +0000 (22:19 +0000)]
hole-repair-
20191117: fix
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 17 Nov 2019 22:10:52 +0000 (22:10 +0000)]
hole-repair-
20191117: finished quality
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 17 Nov 2019 22:10:44 +0000 (22:10 +0000)]
hole-repair-
20191117: mostly finished
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 17 Nov 2019 22:09:45 +0000 (22:09 +0000)]
hole-repair-
20191117: post joins properly
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 17 Nov 2019 22:09:05 +0000 (22:09 +0000)]
hole-repair-
20191117: wip
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 17 Nov 2019 22:07:03 +0000 (22:07 +0000)]
hole-repair-
20191117: abandon roundedness
For printing face side down
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 17 Nov 2019 22:05:55 +0000 (22:05 +0000)]
hole-repair-
20191117: wip, before abandon roundedness
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 17 Nov 2019 22:04:47 +0000 (22:04 +0000)]
hole-repair-
20191117: wip
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 17 Nov 2019 22:02:06 +0000 (22:02 +0000)]
hole-repair-
20191117: wip
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sat, 7 Sep 2019 13:35:18 +0000 (14:35 +0100)]
utils: linextr_y_xz: New module
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sat, 24 Aug 2019 11:56:19 +0000 (12:56 +0100)]
utils: linextr_x_yz: New module
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sat, 24 Aug 2019 11:56:04 +0000 (12:56 +0100)]
utils: linextr: Honour convexity and default it to 20
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Thu, 22 Aug 2019 17:41:05 +0000 (18:41 +0100)]
Makefile, reprap-objects.make: move reuseable parts into own file
No functional change for in-tree use. Out-of-tree users have to
include reprap-objects.make instead.
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 31 Mar 2019 10:58:34 +0000 (11:58 +0100)]
fairphone-case: finish converting catch to thumb recess
One stray comment.
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 31 Mar 2019 10:40:21 +0000 (11:40 +0100)]
fairphone-case: tidy up catch: Rename some modules
NFC
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 31 Mar 2019 10:39:02 +0000 (11:39 +0100)]
fairphone-case: tidy up catch: Drop now-unused catch_* variables
NFC
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 31 Mar 2019 10:38:42 +0000 (11:38 +0100)]
fairphone-case: tidy up catch: Convert to thumbrecess_topcurve_r
NFC
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 31 Mar 2019 10:37:35 +0000 (11:37 +0100)]
fairphone-case: tidy up catch: Convert to thumbrecess_width.
NFC
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 31 Mar 2019 10:35:44 +0000 (11:35 +0100)]
fairphone-case: tidy up catch: drop xwidth parameter to CatchPortion
NFC
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 31 Mar 2019 10:33:46 +0000 (11:33 +0100)]
fairphone-case: reorganise catch, drop now-unused cpp* variables
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 31 Mar 2019 10:31:41 +0000 (11:31 +0100)]
fairphone-case: reorganise catch into thumb recess
In this commit, rework the case portion from a catch striker into a
thumb recess.
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 31 Mar 2019 09:30:14 +0000 (10:30 +0100)]
fairphone-case: wip reorganise catch
The catch breaks off but turns out not to be needed. So we are going
to remove it in favour of a simple recess to get your thumb in to open
the case.
The lid no longer has anything related to this: its edge will be
suitable.
In this commit, remove the lid portion, ie CatchCatchProfile.
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Fri, 1 Mar 2019 20:40:22 +0000 (20:40 +0000)]
salter-scale-hook: ScrewHole
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Fri, 1 Mar 2019 20:28:33 +0000 (20:28 +0000)]
salter-scale-hook: wip ScrewHole
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Fri, 1 Mar 2019 20:25:15 +0000 (20:25 +0000)]
salter-scale-hook: wip Cut
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Fri, 1 Mar 2019 20:23:06 +0000 (20:23 +0000)]
salter-scale-hook: wip Hook
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Fri, 1 Mar 2019 20:16:44 +0000 (20:16 +0000)]
salter-scale-hook: CutProfile
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Fri, 1 Mar 2019 20:13:48 +0000 (20:13 +0000)]
salter-scale-hook: wip CutProfile
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Fri, 1 Mar 2019 20:13:32 +0000 (20:13 +0000)]
salter-scale-hook: wip CutProfile
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Fri, 1 Mar 2019 20:12:02 +0000 (20:12 +0000)]
salter-scale-hook: wip
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Fri, 1 Mar 2019 20:08:39 +0000 (20:08 +0000)]
salter-scale-hook: wip
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Fri, 1 Mar 2019 19:59:25 +0000 (19:59 +0000)]
salter-scale-hook: wip
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Fri, 1 Mar 2019 19:53:55 +0000 (19:53 +0000)]
treefoil: better printing
In our Cura support is at 90 degrees. Rotating the whole thing by
45deg means the support doesn't align to the structure, so it is
easier to remove.
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Tue, 12 Feb 2019 00:34:28 +0000 (00:34 +0000)]
treefoiL: shape of small one
from email from Simon Tatham
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Mon, 28 Jan 2019 22:34:44 +0000 (22:34 +0000)]
was successful but rotate to use less support
Ian Jackson [Sun, 27 Jan 2019 20:17:40 +0000 (20:17 +0000)]
treefoi: try this (v2)
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 27 Jan 2019 20:07:49 +0000 (20:07 +0000)]
Revert "treefoil: printing angle"
This is already wobbing a lot with the little things before they join
up; it is obviously going to fail.
This reverts commit
8a3c722ca43763f73e16f2ef05895fcc188fb77a.
Ian Jackson [Sun, 27 Jan 2019 19:06:01 +0000 (19:06 +0000)]
treefoil: printing angle
Ian Jackson [Sun, 27 Jan 2019 19:03:44 +0000 (19:03 +0000)]
treefoi: try this
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 27 Jan 2019 18:45:45 +0000 (18:45 +0000)]
treefoi: more, a thing
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 27 Jan 2019 18:41:38 +0000 (18:41 +0000)]
treefoi: more
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 27 Jan 2019 18:39:19 +0000 (18:39 +0000)]
treefoi: more
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 27 Jan 2019 18:39:00 +0000 (18:39 +0000)]
treefoi: more
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 27 Jan 2019 18:35:36 +0000 (18:35 +0000)]
treefoi: more
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 27 Jan 2019 18:20:33 +0000 (18:20 +0000)]
treefoil: wip, from email from Simon
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Mon, 14 Jan 2019 00:31:23 +0000 (00:31 +0000)]
lock-inframe-bracket: adjust (after another failure)
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Mon, 14 Jan 2019 00:28:52 +0000 (00:28 +0000)]
lock-inframe-bracket: drop unused "divide_around", "divide_heads"
nfc.
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sat, 29 Dec 2018 16:20:23 +0000 (16:20 +0000)]
question-token: adjust size
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sat, 29 Dec 2018 15:06:16 +0000 (15:06 +0000)]
hotel-piece-model: scale, adds support
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sat, 29 Dec 2018 14:55:14 +0000 (14:55 +0000)]
hotel-piece-model: rename
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sat, 29 Dec 2018 14:54:17 +0000 (14:54 +0000)]
hotel-piece-model: wip
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Thu, 29 Nov 2018 00:39:27 +0000 (00:39 +0000)]
poster-tube-lid: revert many size changes, from v3
v3 broke due to being too stiff and having not enough slop
basically go back to v2 in many respects
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Thu, 29 Nov 2018 00:35:22 +0000 (00:35 +0000)]
Revert "poster-tube-lid: make catch stalk base width same as stalk height"
From v3
This reverts commit
01c83df45270be5fd6dba66df79a1217ab5b8acb.
Ian Jackson [Wed, 28 Nov 2018 22:47:06 +0000 (22:47 +0000)]
poster-tube-lid: even thicker catch tip now
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Wed, 28 Nov 2018 22:46:58 +0000 (22:46 +0000)]
poster-tube-lid: sloping bottom of catch tip
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Wed, 28 Nov 2018 22:43:17 +0000 (22:43 +0000)]
poster-tube-lid: Sort out CatchTipProfile vs HeadProfile
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Wed, 28 Nov 2018 22:41:03 +0000 (22:41 +0000)]
poster-tube-lid: Separate out CatchTipProfile
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Wed, 28 Nov 2018 22:38:50 +0000 (22:38 +0000)]
poster-tube-lid: further adjust catch_knob_height from v2
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Wed, 28 Nov 2018 22:38:37 +0000 (22:38 +0000)]
poster-tube-lid: adjust catch_pin_slow_x_extra from v2
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Wed, 28 Nov 2018 22:38:29 +0000 (22:38 +0000)]
poster-tube-lid: adjust catch_stalk_h from v2
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Wed, 28 Nov 2018 21:31:12 +0000 (21:31 +0000)]
poster-tube-lid: adjust catch_knob_height from v2
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Wed, 28 Nov 2018 21:29:05 +0000 (21:29 +0000)]
poster-tube-lid: catch stalk base outer curve same centre as inner
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Wed, 28 Nov 2018 21:26:31 +0000 (21:26 +0000)]
poster-tube-lid: make catch stalk base width same as stalk height
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Wed, 28 Nov 2018 00:03:16 +0000 (00:03 +0000)]
poster-tube-lid: Drop commented-out old thing (nfc)
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Wed, 28 Nov 2018 00:01:28 +0000 (00:01 +0000)]
poster-tube-lid: Correct for when cpp11 above cpp10
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Tue, 27 Nov 2018 23:48:48 +0000 (23:48 +0000)]
poster-tube-lid: Make SomeStrap etc. take width; adjust catch
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Tue, 27 Nov 2018 23:42:57 +0000 (23:42 +0000)]
poster-tube-lid: catch: adjust stalk height from v1
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Tue, 27 Nov 2018 23:41:56 +0000 (23:41 +0000)]
poster-tube-lid: catch: adjust knob above from v1
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Tue, 27 Nov 2018 22:42:27 +0000 (22:42 +0000)]
poster-tube-lid: catch: Adjust catch_knob_height
* Include catch_head_th, so catch_knob_height is relative to that
* Decrease catch_knob_heeight a bit to partially compensate
* Result is that knob is somewhat higher
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Tue, 27 Nov 2018 22:41:41 +0000 (22:41 +0000)]
poster-tube-lid: catch: Introduce (and vary) catch_head_th
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Tue, 27 Nov 2018 22:40:32 +0000 (22:40 +0000)]
poster-tube-lid: catch: abolish unused catch_stalk_th
It turns out that this is not honoured anywhere (if it ever was).
If we wanted a separate thickness it would probably want to be thicker
and our current design is not set up for that, anyway. So leave it
as-is.
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Tue, 27 Nov 2018 22:33:48 +0000 (22:33 +0000)]
poster-tube-lid: catch: remove now-obsolete variables (nfc)
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Tue, 27 Nov 2018 22:22:16 +0000 (22:22 +0000)]
poster-tube-lid: catch: rename stem to stalk (nfc)
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Tue, 27 Nov 2018 22:18:43 +0000 (22:18 +0000)]
poster-tube-lid: catch: set catch_pin_slop_x_extra to 0
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Tue, 27 Nov 2018 22:18:16 +0000 (22:18 +0000)]
poster-tube-lid: catch: slight registration adjustment
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Tue, 27 Nov 2018 22:18:02 +0000 (22:18 +0000)]
poster-tube-lid: catch: make head inner edge vertical
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Tue, 27 Nov 2018 22:17:11 +0000 (22:17 +0000)]
poster-tube-lid: catch: introduce cpp_adj
I think the problem is actually the lack of the radius scaling
which we had before the rework.
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Tue, 27 Nov 2018 22:06:41 +0000 (22:06 +0000)]
poster-tube-lid: catch: introduce catch_pin_slop_x_extra (wrong?)
I think the problem is actually the lack of the radius scaling
which we had before the rework.
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Tue, 27 Nov 2018 22:06:31 +0000 (22:06 +0000)]
poster-tube-lid: catch: fix assembly and demos
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Tue, 27 Nov 2018 22:06:18 +0000 (22:06 +0000)]
poster-tube-lid: catch: introduce catch_assembly_dy (nfc)
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Tue, 27 Nov 2018 21:51:06 +0000 (21:51 +0000)]
poster-tube-lid: catch: rework mostly done ?
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Tue, 27 Nov 2018 21:50:20 +0000 (21:50 +0000)]
poster-tube-lid: catch: rework going well
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Tue, 27 Nov 2018 21:40:26 +0000 (21:40 +0000)]
poster-tube-lid: catch: rework means assembly part is bigger
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Tue, 27 Nov 2018 21:40:23 +0000 (21:40 +0000)]
poster-tube-lid: catch: wip rework entirely
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Tue, 27 Nov 2018 21:33:18 +0000 (21:33 +0000)]
poster-tube-lid: catch: wip rework entirely
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Tue, 27 Nov 2018 20:27:27 +0000 (20:27 +0000)]
poster-tube-lid: catch: wip rework entirely
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 25 Nov 2018 23:30:45 +0000 (23:30 +0000)]
poster-tube-lid: Add actual knob
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 25 Nov 2018 23:26:23 +0000 (23:26 +0000)]
poster-tube-lid: Provide CatchCore (nfc)
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 25 Nov 2018 22:28:11 +0000 (22:28 +0000)]
poster-tube-lid: use fa=3 for distorted, fa=1 gives random openscad error
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
~ianmdlvl / reprap-play.git / log