chiark / gitweb /
Ian Jackson [Fri, 1 Mar 2019 20:13:32 +0000 (20:13 +0000)]
salter-scale-hook: wip CutProfile
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Fri, 1 Mar 2019 20:12:02 +0000 (20:12 +0000)]
salter-scale-hook: wip
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Fri, 1 Mar 2019 20:08:39 +0000 (20:08 +0000)]
salter-scale-hook: wip
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Fri, 1 Mar 2019 19:59:25 +0000 (19:59 +0000)]
salter-scale-hook: wip
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Fri, 1 Mar 2019 19:53:55 +0000 (19:53 +0000)]
treefoil: better printing
In our Cura support is at 90 degrees. Rotating the whole thing by
45deg means the support doesn't align to the structure, so it is
easier to remove.
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Tue, 12 Feb 2019 00:34:28 +0000 (00:34 +0000)]
treefoiL: shape of small one
from email from Simon Tatham
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Mon, 28 Jan 2019 22:34:44 +0000 (22:34 +0000)]
was successful but rotate to use less support
Ian Jackson [Sun, 27 Jan 2019 20:17:40 +0000 (20:17 +0000)]
treefoi: try this (v2)
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 27 Jan 2019 20:07:49 +0000 (20:07 +0000)]
Revert "treefoil: printing angle"
This is already wobbing a lot with the little things before they join
up; it is obviously going to fail.
This reverts commit
8a3c722ca43763f73e16f2ef05895fcc188fb77a.
Ian Jackson [Sun, 27 Jan 2019 19:06:01 +0000 (19:06 +0000)]
treefoil: printing angle
Ian Jackson [Sun, 27 Jan 2019 19:03:44 +0000 (19:03 +0000)]
treefoi: try this
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 27 Jan 2019 18:45:45 +0000 (18:45 +0000)]
treefoi: more, a thing
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 27 Jan 2019 18:41:38 +0000 (18:41 +0000)]
treefoi: more
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 27 Jan 2019 18:39:19 +0000 (18:39 +0000)]
treefoi: more
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 27 Jan 2019 18:39:00 +0000 (18:39 +0000)]
treefoi: more
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 27 Jan 2019 18:35:36 +0000 (18:35 +0000)]
treefoi: more
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 27 Jan 2019 18:20:33 +0000 (18:20 +0000)]
treefoil: wip, from email from Simon
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Mon, 14 Jan 2019 00:31:23 +0000 (00:31 +0000)]
lock-inframe-bracket: adjust (after another failure)
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Mon, 14 Jan 2019 00:28:52 +0000 (00:28 +0000)]
lock-inframe-bracket: drop unused "divide_around", "divide_heads"
nfc.
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sat, 29 Dec 2018 16:20:23 +0000 (16:20 +0000)]
question-token: adjust size
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sat, 29 Dec 2018 15:06:16 +0000 (15:06 +0000)]
hotel-piece-model: scale, adds support
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sat, 29 Dec 2018 14:55:14 +0000 (14:55 +0000)]
hotel-piece-model: rename
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sat, 29 Dec 2018 14:54:17 +0000 (14:54 +0000)]
hotel-piece-model: wip
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Thu, 29 Nov 2018 00:39:27 +0000 (00:39 +0000)]
poster-tube-lid: revert many size changes, from v3
v3 broke due to being too stiff and having not enough slop
basically go back to v2 in many respects
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Thu, 29 Nov 2018 00:35:22 +0000 (00:35 +0000)]
Revert "poster-tube-lid: make catch stalk base width same as stalk height"
From v3
This reverts commit
01c83df45270be5fd6dba66df79a1217ab5b8acb.
Ian Jackson [Wed, 28 Nov 2018 22:47:06 +0000 (22:47 +0000)]
poster-tube-lid: even thicker catch tip now
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Wed, 28 Nov 2018 22:46:58 +0000 (22:46 +0000)]
poster-tube-lid: sloping bottom of catch tip
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Wed, 28 Nov 2018 22:43:17 +0000 (22:43 +0000)]
poster-tube-lid: Sort out CatchTipProfile vs HeadProfile
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Wed, 28 Nov 2018 22:41:03 +0000 (22:41 +0000)]
poster-tube-lid: Separate out CatchTipProfile
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Wed, 28 Nov 2018 22:38:50 +0000 (22:38 +0000)]
poster-tube-lid: further adjust catch_knob_height from v2
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Wed, 28 Nov 2018 22:38:37 +0000 (22:38 +0000)]
poster-tube-lid: adjust catch_pin_slow_x_extra from v2
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Wed, 28 Nov 2018 22:38:29 +0000 (22:38 +0000)]
poster-tube-lid: adjust catch_stalk_h from v2
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Wed, 28 Nov 2018 21:31:12 +0000 (21:31 +0000)]
poster-tube-lid: adjust catch_knob_height from v2
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Wed, 28 Nov 2018 21:29:05 +0000 (21:29 +0000)]
poster-tube-lid: catch stalk base outer curve same centre as inner
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Wed, 28 Nov 2018 21:26:31 +0000 (21:26 +0000)]
poster-tube-lid: make catch stalk base width same as stalk height
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Wed, 28 Nov 2018 00:03:16 +0000 (00:03 +0000)]
poster-tube-lid: Drop commented-out old thing (nfc)
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Wed, 28 Nov 2018 00:01:28 +0000 (00:01 +0000)]
poster-tube-lid: Correct for when cpp11 above cpp10
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Tue, 27 Nov 2018 23:48:48 +0000 (23:48 +0000)]
poster-tube-lid: Make SomeStrap etc. take width; adjust catch
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Tue, 27 Nov 2018 23:42:57 +0000 (23:42 +0000)]
poster-tube-lid: catch: adjust stalk height from v1
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Tue, 27 Nov 2018 23:41:56 +0000 (23:41 +0000)]
poster-tube-lid: catch: adjust knob above from v1
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Tue, 27 Nov 2018 22:42:27 +0000 (22:42 +0000)]
poster-tube-lid: catch: Adjust catch_knob_height
* Include catch_head_th, so catch_knob_height is relative to that
* Decrease catch_knob_heeight a bit to partially compensate
* Result is that knob is somewhat higher
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Tue, 27 Nov 2018 22:41:41 +0000 (22:41 +0000)]
poster-tube-lid: catch: Introduce (and vary) catch_head_th
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Tue, 27 Nov 2018 22:40:32 +0000 (22:40 +0000)]
poster-tube-lid: catch: abolish unused catch_stalk_th
It turns out that this is not honoured anywhere (if it ever was).
If we wanted a separate thickness it would probably want to be thicker
and our current design is not set up for that, anyway. So leave it
as-is.
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Tue, 27 Nov 2018 22:33:48 +0000 (22:33 +0000)]
poster-tube-lid: catch: remove now-obsolete variables (nfc)
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Tue, 27 Nov 2018 22:22:16 +0000 (22:22 +0000)]
poster-tube-lid: catch: rename stem to stalk (nfc)
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Tue, 27 Nov 2018 22:18:43 +0000 (22:18 +0000)]
poster-tube-lid: catch: set catch_pin_slop_x_extra to 0
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Tue, 27 Nov 2018 22:18:16 +0000 (22:18 +0000)]
poster-tube-lid: catch: slight registration adjustment
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Tue, 27 Nov 2018 22:18:02 +0000 (22:18 +0000)]
poster-tube-lid: catch: make head inner edge vertical
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Tue, 27 Nov 2018 22:17:11 +0000 (22:17 +0000)]
poster-tube-lid: catch: introduce cpp_adj
I think the problem is actually the lack of the radius scaling
which we had before the rework.
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Tue, 27 Nov 2018 22:06:41 +0000 (22:06 +0000)]
poster-tube-lid: catch: introduce catch_pin_slop_x_extra (wrong?)
I think the problem is actually the lack of the radius scaling
which we had before the rework.
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Tue, 27 Nov 2018 22:06:31 +0000 (22:06 +0000)]
poster-tube-lid: catch: fix assembly and demos
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Tue, 27 Nov 2018 22:06:18 +0000 (22:06 +0000)]
poster-tube-lid: catch: introduce catch_assembly_dy (nfc)
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Tue, 27 Nov 2018 21:51:06 +0000 (21:51 +0000)]
poster-tube-lid: catch: rework mostly done ?
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Tue, 27 Nov 2018 21:50:20 +0000 (21:50 +0000)]
poster-tube-lid: catch: rework going well
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Tue, 27 Nov 2018 21:40:26 +0000 (21:40 +0000)]
poster-tube-lid: catch: rework means assembly part is bigger
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Tue, 27 Nov 2018 21:40:23 +0000 (21:40 +0000)]
poster-tube-lid: catch: wip rework entirely
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Tue, 27 Nov 2018 21:33:18 +0000 (21:33 +0000)]
poster-tube-lid: catch: wip rework entirely
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Tue, 27 Nov 2018 20:27:27 +0000 (20:27 +0000)]
poster-tube-lid: catch: wip rework entirely
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 25 Nov 2018 23:30:45 +0000 (23:30 +0000)]
poster-tube-lid: Add actual knob
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 25 Nov 2018 23:26:23 +0000 (23:26 +0000)]
poster-tube-lid: Provide CatchCore (nfc)
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 25 Nov 2018 22:28:11 +0000 (22:28 +0000)]
poster-tube-lid: use fa=3 for distorted, fa=1 gives random openscad error
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 25 Nov 2018 14:40:49 +0000 (14:40 +0000)]
distort-stl: debugging, avoid a warning
Use of uninitialized value $debug in numeric ge (>=) at ./distort-stl line 107.
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 25 Nov 2018 14:39:50 +0000 (14:39 +0000)]
distort-stl: fix for triangle source notation
Seems to work now!
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 25 Nov 2018 14:39:29 +0000 (14:39 +0000)]
distort-stl: debugging, a bit more
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 25 Nov 2018 13:30:15 +0000 (13:30 +0000)]
distort-stl: new approach: split longest edge (does not work yet)
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 25 Nov 2018 13:22:20 +0000 (13:22 +0000)]
distort-stl: introduce $gensplit (nfc)
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 25 Nov 2018 13:17:45 +0000 (13:17 +0000)]
distort-stl: debugging, make STDERR output conditional
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 25 Nov 2018 13:17:22 +0000 (13:17 +0000)]
distort-stl: debugging, fix a perl warning
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 25 Nov 2018 12:52:01 +0000 (12:52 +0000)]
distort-stl: debugging PS output, incomplete
Not all that useful because typically it's off the screen or
something. And there is no showpage. At least, in my current test
case it produces a file which looks blank in gv.
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Fri, 23 Nov 2018 23:19:17 +0000 (23:19 +0000)]
distort-stl: debugging
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Fri, 23 Nov 2018 21:45:38 +0000 (21:45 +0000)]
distort-stl: break out sprintf_triangle (nfc)
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Fri, 23 Nov 2018 21:44:32 +0000 (21:44 +0000)]
distort-stl: debugging
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Fri, 23 Nov 2018 20:09:58 +0000 (20:09 +0000)]
distort-stl: slight rework to make debug output better
Calculation ordering changed but answers should be the same.
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Fri, 23 Nov 2018 20:09:50 +0000 (20:09 +0000)]
distort-stl: debugging
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Fri, 23 Nov 2018 19:42:15 +0000 (19:42 +0000)]
distort-stl: fixes
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Thu, 22 Nov 2018 20:39:55 +0000 (20:39 +0000)]
distort-stl: wip fixing edge mismatch bug
807ba5b3024fb82823d2f3fb9dafa1702470e56a
"poster-tube-lid: Makefile: get set-fa argument right"
was wrong, because it's not permitted to have a vertex of one triangle
in the middle of the edge of an adjacent triangle.
What we should be doing is splitting *edges*. If we do that based
only on the properties of the *edge*, and get the same midpoint
coordinate each time, then the result will be consistent when we
process the "same" edge as part of different triangles. So we don't
need to memoise everything.
Right now this is just the initial cut and does not actually run.
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Thu, 22 Nov 2018 20:24:36 +0000 (20:24 +0000)]
poster-tube-lid: Makefile: get set-fa argument right
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Thu, 22 Nov 2018 20:01:07 +0000 (20:01 +0000)]
poster-tube-lid: catch_pin_width fix
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Thu, 22 Nov 2018 19:54:54 +0000 (19:54 +0000)]
poster-tube-lid: wip catch_pin_width debug (broken?)
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Thu, 22 Nov 2018 19:54:40 +0000 (19:54 +0000)]
poster-tube-lid: Additional tests for catch_pin_width debug
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Thu, 22 Nov 2018 19:54:11 +0000 (19:54 +0000)]
poster-tube-lid: Introduce bayo_*_rad (nfc)
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Thu, 22 Nov 2018 01:19:18 +0000 (01:19 +0000)]
poster-tube-lid: catch: Colourise CatchDemo
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Thu, 22 Nov 2018 01:15:11 +0000 (01:15 +0000)]
poster-tube-lid: catch: Provide CatchDemo
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Thu, 22 Nov 2018 01:14:58 +0000 (01:14 +0000)]
poster-tube-lid: catch wip, centralise CatchAssembly
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Thu, 22 Nov 2018 00:58:32 +0000 (00:58 +0000)]
poster-tube-lid: catch wip, CatchAssembly seems done ?
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Thu, 22 Nov 2018 00:55:32 +0000 (00:55 +0000)]
poster-tube-lid: Break out SomeStrap (nfc)
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Thu, 22 Nov 2018 00:37:54 +0000 (00:37 +0000)]
poster-tube-lid: catch wip, CatchPostDistort varying coarseness
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Thu, 22 Nov 2018 00:33:30 +0000 (00:33 +0000)]
distort-stl: Actually implement set-fa
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Thu, 22 Nov 2018 00:30:14 +0000 (00:30 +0000)]
distort-stl: delete now-unused subdivision function
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Thu, 22 Nov 2018 00:29:29 +0000 (00:29 +0000)]
distort-stl: Subdivide only those triangles which need it
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Thu, 22 Nov 2018 00:22:44 +0000 (00:22 +0000)]
distort-stl: Break out project_cylinder_triangle_need_subdivide
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Thu, 22 Nov 2018 00:18:31 +0000 (00:18 +0000)]
poster-tube-lid: catch wip, CatchAssembly
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Thu, 22 Nov 2018 00:12:46 +0000 (00:12 +0000)]
poster-tube-lid: catch wip, CatchPostDistort PoC
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Wed, 21 Nov 2018 23:53:29 +0000 (23:53 +0000)]
poster-tube-lid: catch wip, CatchPreDistort
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Wed, 21 Nov 2018 00:31:32 +0000 (00:31 +0000)]
poster-tube-lid: catch wip, hook
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Wed, 21 Nov 2018 00:26:38 +0000 (00:26 +0000)]
poster-tube-lid: catch wip, before no rotate pin
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Wed, 21 Nov 2018 00:22:55 +0000 (00:22 +0000)]
poster-tube-lid: catch wip, mid-ework
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Wed, 21 Nov 2018 00:12:53 +0000 (00:12 +0000)]
poster-tube-lid: catch wip, mid-ework
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Tue, 20 Nov 2018 23:46:23 +0000 (23:46 +0000)]
poster-tube-lid: catch wip, mid-rework, before pointy base redraft
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Tue, 20 Nov 2018 23:37:58 +0000 (23:37 +0000)]
poster-tube-lid: catch wip, before rework
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
~ianmdlvl / reprap-play.git / log