chiark / gitweb /
Ian Jackson [Sun, 27 Apr 2025 17:18:45 +0000 (18:18 +0100)]
toolbox-inserts: shuffle so middle is a hole line (simplify)
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 27 Apr 2025 17:17:46 +0000 (18:17 +0100)]
toolbox-inserts: shuffle so middle is a hole line
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 27 Apr 2025 14:02:52 +0000 (15:02 +0100)]
toolbox-inserts: remove obsolete wall bevel constant
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 27 Apr 2025 13:52:15 +0000 (14:52 +0100)]
toolbox-inserts: well rounded edge, deploy
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 27 Apr 2025 11:47:11 +0000 (12:47 +0100)]
toolbox-inserts: well rounded edge, wip
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 27 Apr 2025 11:44:18 +0000 (12:44 +0100)]
toolbox-inserts: well rounded edge, wip
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Fri, 25 Apr 2025 16:17:22 +0000 (17:17 +0100)]
toolbox-inserts: remove some old minkoskis
We're going to do this with a 2D approach.
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Fri, 25 Apr 2025 16:14:09 +0000 (17:14 +0100)]
toolbox-inserts: shrink fixing very slightly
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Fri, 25 Apr 2025 16:12:55 +0000 (17:12 +0100)]
toolbox-inserts: driver handle: widen rear part just a bit
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Fri, 25 Apr 2025 16:10:11 +0000 (17:10 +0100)]
toolbox-inserts: driver handle: bring code together
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Fri, 25 Apr 2025 16:06:06 +0000 (17:06 +0100)]
toolbox-inserts: driver handle: adjust
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Fri, 25 Apr 2025 15:57:22 +0000 (16:57 +0100)]
toolbox-inserts: Cover screw ends
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Fri, 25 Apr 2025 14:29:28 +0000 (15:29 +0100)]
toolbox-inserts: Prep for M4x6 screws
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Tue, 22 Apr 2025 19:33:11 +0000 (20:33 +0100)]
toolbox-inserts: Improve fixing holes representation
This is simpler and I think it renders faster.
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Tue, 22 Apr 2025 18:51:39 +0000 (19:51 +0100)]
toolbox-inserts: wip fixingdemo
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Tue, 22 Apr 2025 18:27:12 +0000 (19:27 +0100)]
toolbox-inserts: add a comment about something obsolete
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Tue, 22 Apr 2025 18:26:49 +0000 (19:26 +0100)]
toolbox-inserts: break out fixing_head_top_z
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Tue, 22 Apr 2025 18:24:52 +0000 (19:24 +0100)]
toolbox-inserts: wip fixingdemo
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Tue, 22 Apr 2025 18:24:39 +0000 (19:24 +0100)]
toolbox-inserts: use correct depth
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Tue, 22 Apr 2025 18:24:12 +0000 (19:24 +0100)]
toolbox-inserts: allow screws to protrude avoiding zero measure
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Tue, 22 Apr 2025 18:23:52 +0000 (19:23 +0100)]
toolbox-inserts: fix plate holes
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Tue, 22 Apr 2025 18:18:03 +0000 (19:18 +0100)]
toolbox-inserts: break out FixingSurround
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Tue, 22 Apr 2025 18:17:50 +0000 (19:17 +0100)]
toolbox-inserts: reformt to make % clearer
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Tue, 22 Apr 2025 18:15:57 +0000 (19:15 +0100)]
toolbox-inserts: wip fixingdemo
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Tue, 22 Apr 2025 18:02:54 +0000 (19:02 +0100)]
toolbox-inserts: remove edge holes a different way
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Tue, 22 Apr 2025 18:01:24 +0000 (19:01 +0100)]
toolbox-inserts: move a -0.5
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Tue, 22 Apr 2025 17:59:27 +0000 (18:59 +0100)]
toolbox-inserts: remove edge holes a different way (prep)
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Tue, 22 Apr 2025 17:55:42 +0000 (18:55 +0100)]
toolbox-inserts: new way to avoid bugs, tidying
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Tue, 22 Apr 2025 17:51:52 +0000 (18:51 +0100)]
toolbox-inserts: wip new way to avoid bugs
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Mon, 21 Apr 2025 18:40:10 +0000 (19:40 +0100)]
toolbox-inserts: flail around openscad bugs
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Mon, 21 Apr 2025 18:36:23 +0000 (19:36 +0100)]
toolbox-inserts: plates intersection workaround
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Mon, 21 Apr 2025 18:29:10 +0000 (19:29 +0100)]
toolbox-inserts: TestPlates
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Mon, 21 Apr 2025 18:28:04 +0000 (19:28 +0100)]
toolbox-inserts: TestPlates
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Mon, 21 Apr 2025 18:23:21 +0000 (19:23 +0100)]
toolbox-inserts: plates
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Mon, 21 Apr 2025 18:20:21 +0000 (19:20 +0100)]
toolbox-inserts: FixingsHoledPlan - must faster
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Mon, 21 Apr 2025 18:17:45 +0000 (19:17 +0100)]
toolbox-inserts: break out AtFixings, fix
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Mon, 21 Apr 2025 18:14:15 +0000 (19:14 +0100)]
toolbox-inserts: break out AtFixings, wip
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Mon, 21 Apr 2025 17:48:26 +0000 (18:48 +0100)]
toolbox-inserts: wip plate edge
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Mon, 21 Apr 2025 17:48:19 +0000 (18:48 +0100)]
toolbox-inserts: coarser
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Mon, 21 Apr 2025 12:20:33 +0000 (13:20 +0100)]
toolbox-inserts: adjust by half a unit only in y
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Mon, 21 Apr 2025 12:18:25 +0000 (13:18 +0100)]
toolbox-inserts: adjust by half a unit
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Mon, 21 Apr 2025 12:12:43 +0000 (13:12 +0100)]
toolbox-inserts: wip plate
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Mon, 21 Apr 2025 11:58:34 +0000 (12:58 +0100)]
toolbox-inserts: adjust demo
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Mon, 21 Apr 2025 11:55:10 +0000 (12:55 +0100)]
toolbox-inserts: actual screw threads, slop for thread
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Mon, 21 Apr 2025 11:37:18 +0000 (12:37 +0100)]
toolbox-inserts: actual screw threads, fix
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Mon, 21 Apr 2025 11:35:49 +0000 (12:35 +0100)]
toolbox-inserts: actual screw threads
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Mon, 21 Apr 2025 11:29:52 +0000 (12:29 +0100)]
toolbox-inserts: more holes
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Mon, 21 Apr 2025 11:28:54 +0000 (12:28 +0100)]
toolbox-inserts: comprehension
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Mon, 21 Apr 2025 11:12:35 +0000 (12:12 +0100)]
toolbox-inserts: fix z
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Mon, 21 Apr 2025 11:00:32 +0000 (12:00 +0100)]
toolbox-inserts: WellSurround: default offset
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Mon, 21 Apr 2025 10:59:41 +0000 (11:59 +0100)]
toolbox-inserts: WellSurround: remove debug
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Mon, 21 Apr 2025 10:59:22 +0000 (11:59 +0100)]
toolbox-inserts: WellSurround: indicative
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Mon, 21 Apr 2025 10:56:24 +0000 (11:56 +0100)]
toolbox-inserts: WellSurround: screws/fixings terminology
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Mon, 21 Apr 2025 10:55:22 +0000 (11:55 +0100)]
toolbox-inserts: WellSurround: wip screws
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Mon, 21 Apr 2025 10:49:07 +0000 (11:49 +0100)]
toolbox-inserts: WellSurround: prep for screws
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Mon, 21 Apr 2025 10:39:32 +0000 (11:39 +0100)]
toolbox-inserts: WellSurround: prep for screws
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Mon, 21 Apr 2025 10:35:31 +0000 (11:35 +0100)]
toolbox-inserts: WellSurround: better docs, screws (nyi)
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Mon, 21 Apr 2025 10:33:29 +0000 (11:33 +0100)]
toolbox-inserts: WellSurround: offset
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Mon, 21 Apr 2025 10:33:12 +0000 (11:33 +0100)]
toolbox-inserts: formatting
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Mon, 21 Apr 2025 10:31:38 +0000 (11:31 +0100)]
toolbox-inserts: formatting and remove extraneous render
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Mon, 21 Apr 2025 10:23:00 +0000 (11:23 +0100)]
toolbox-inserts: wip overall
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Mon, 21 Apr 2025 10:19:27 +0000 (11:19 +0100)]
toolbox-inserts: box bottom model
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Mon, 21 Apr 2025 10:19:18 +0000 (11:19 +0100)]
toolbox-inserts: cavity model, fix, z
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Mon, 21 Apr 2025 10:12:47 +0000 (11:12 +0100)]
toolbox-inserts: cavity model
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Mon, 21 Apr 2025 10:00:58 +0000 (11:00 +0100)]
toolbox-inserts: fix fine version
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 20 Apr 2025 22:22:22 +0000 (23:22 +0100)]
toolbox-inserts: floor, redone
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Mon, 21 Apr 2025 00:16:32 +0000 (01:16 +0100)]
toolbox-inserts: no minkowski bevels
This is too buggy in openscad.
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Mon, 21 Apr 2025 00:06:50 +0000 (01:06 +0100)]
Revert "toolbox-inserts: t.scad demonstraitng broken even if reimported"
This reverts commit
8636193b6eae0fdcd0ec65fd57d8a9e8930e066e.
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Mon, 21 Apr 2025 00:06:29 +0000 (01:06 +0100)]
toolbox-inserts: t.scad demonstraitng broken even if reimported
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 20 Apr 2025 23:28:59 +0000 (00:28 +0100)]
Revert "toolbox-inserts: floor, but now it triggers an openscad bug"
This reverts commit
c89836f56cf2ae2d9a25d617925ca179bb383622.
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 20 Apr 2025 22:22:22 +0000 (23:22 +0100)]
toolbox-inserts: floor, but now it triggers an openscad bug
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 20 Apr 2025 22:13:54 +0000 (23:13 +0100)]
toolbox-inserts: gaps, height
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 20 Apr 2025 22:03:30 +0000 (23:03 +0100)]
toolbox-inserts: gaps
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 20 Apr 2025 18:45:31 +0000 (19:45 +0100)]
toolbox-inserts: gaps, fix extent
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 20 Apr 2025 18:44:05 +0000 (19:44 +0100)]
toolbox-inserts: wip gaps
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 20 Apr 2025 18:36:51 +0000 (19:36 +0100)]
toolbox-inserts: entirely new approach to bevels (tidy)
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 20 Apr 2025 18:36:33 +0000 (19:36 +0100)]
toolbox-inserts: entirely new approach to bevels
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 20 Apr 2025 18:03:06 +0000 (19:03 +0100)]
toolbox-inserts: taller base
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 20 Apr 2025 18:01:17 +0000 (19:01 +0100)]
toolbox-inserts: inner bevel seems ok?
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 20 Apr 2025 17:58:30 +0000 (18:58 +0100)]
toolbox-inserts: wip inner bevel
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 20 Apr 2025 17:54:47 +0000 (18:54 +0100)]
toolbox-inserts: wip inner bevel
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 20 Apr 2025 17:51:39 +0000 (18:51 +0100)]
toolbox-inserts: prepare wall for inner bevel
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 20 Apr 2025 17:48:49 +0000 (18:48 +0100)]
toolbox-inserts: fix wall size
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 20 Apr 2025 17:48:46 +0000 (18:48 +0100)]
toolbox-inserts: wip
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 20 Apr 2025 17:47:13 +0000 (18:47 +0100)]
toolbox-inserts: wip
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 20 Apr 2025 17:37:24 +0000 (18:37 +0100)]
toolbox-inserts: wip
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 20 Apr 2025 17:26:32 +0000 (18:26 +0100)]
toolbox-inserts: wip
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 8 Dec 2024 18:28:39 +0000 (18:28 +0000)]
powerbank-bike-clamp: hinge side lobes
Previous print broke at the "inner" "body". This leads me to theorise
that inner lobes are more vulnerable. Maybe doing this will arrange
that any future break is in the clamp (which is smaller to print).
Also more lobes mahy spread the load more. The key edge is now at
79.5% rather than 74.3% of the distance across.
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 8 Dec 2024 18:36:41 +0000 (18:36 +0000)]
powerbank-bike-clamp: debug
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 8 Dec 2024 18:35:30 +0000 (18:35 +0000)]
powerbank-bike-clamp: break out z
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 8 Dec 2024 18:27:11 +0000 (18:27 +0000)]
Revert "powerbank-bike-clamp: experiment with hinge"
This reverts commit
ec7ac1c3ff6ea1391a45393c4b2aa78271663f05.
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 8 Dec 2024 18:26:57 +0000 (18:26 +0000)]
powerbank-bike-clamp: experiment with hinge
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Mon, 25 Nov 2024 21:38:00 +0000 (21:38 +0000)]
Revert "poster-tube-lid: Remove curve from catch tip"
This deletes the tip! And apparently we never tested it.
This reverts commit
7318ed311c589c0856e774ccfeffe6e31ddf6704.
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Mon, 18 Nov 2024 23:00:29 +0000 (23:00 +0000)]
waring-blender-motor-coupler: adjust deeper shaft, from 1st batch
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Mon, 18 Nov 2024 22:58:28 +0000 (22:58 +0000)]
waring-blender-motor-coupler: prep for deeper shaft
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Mon, 18 Nov 2024 22:58:08 +0000 (22:58 +0000)]
waring-blender-motor-coupler: add DemoCutout
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Mon, 18 Nov 2024 22:57:36 +0000 (22:57 +0000)]
waring-blender-motor-coupler: prep for using "toplevels"
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Mon, 18 Nov 2024 22:51:55 +0000 (22:51 +0000)]
waring-blender-motor-coupler: update size from first attempts
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Mon, 18 Nov 2024 22:39:15 +0000 (22:39 +0000)]
poster-tube-lid: Strengthen CatchAssembly
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Thu, 14 Nov 2024 21:41:02 +0000 (21:41 +0000)]
waring-blender-motor-coupler: wip
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
~ianmdlvl / reprap-play.git / log