From: Ian Jackson <ijackson@chiark.greenend.org.uk>
Date: Mon, 21 Apr 2025 00:16:32 +0000 (+0100)
Subject: toolbox-inserts: no minkowski bevels
X-Git-Url: http://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?a=commitdiff_plain;h=f56d08a700c6eef76515bf47ad4175bea3e7b867;p=reprap-play.git

toolbox-inserts: no minkowski bevels

This is too buggy in openscad.

Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
---

diff --git a/toolbox-inserts.scad b/toolbox-inserts.scad
index 0d3b2f2..d5e2fb8 100644
--- a/toolbox-inserts.scad
+++ b/toolbox-inserts.scad
@@ -42,29 +42,29 @@ module WellSurround(half_height, gaps, wall=well_surround_wall) {
   // and half_height is the depth of the well below that.
 
   render() {
-    minkowski(){
-      WallMinkowskiSphere(wall);
+//    minkowski(){
+//      WallMinkowskiSphere(wall);
 
       difference(){
-	linextr(-10, half_height - wall/2)
-	  offset($fn=8, r = wall/2)
+	linextr(-10, half_height)
+	  offset($fn=8, r = wall)
 	  projection(cut=false)
 	  children(0);
 
-	minkowski(){
-	  WallMinkowskiSphere(wall);
+//	minkowski(){
+//	  WallMinkowskiSphere(wall);
 	  translate([0, 0, half_height]) {
 	    children(0);
 	  }
-	}
+//	}
 
 	for (gap=gaps) {
-	  linextr_x_yz(gap[0] - wall/2, gap[1] + wall/2)
-	    rectfromto([ -100, -wall/2 + well_stiffening_height ], [ 100,100 ]);
+	  linextr_x_yz(gap[0], gap[1])
+	    rectfromto([ -100, well_stiffening_height ], [ 100,100 ]);
 	}
       }
     }
-  }
+//  }
 }
 
 module DriverHandleHolder() { ////toplevel