From: Youness Alaoui <kakaroto@kakaroto.homelinux.net>
Date: Wed, 3 Jun 2015 19:09:03 +0000 (-0400)
Subject: Add a new simple settings system/UI
X-Git-Tag: lulzbot-15.02.1-2.01~55^2~11
X-Git-Url: http://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?a=commitdiff_plain;h=d78c653fe8e3eca6c7344e6c418dd3dffe2b1289;p=cura.git

Add a new simple settings system/UI

This new system replaces the old simpleModeSettings system and the materials/profile
ini system implemented upstream. The new system uses a more dynamic aproach
with profiles being dependent on the material instead of being separate
entities.
The hierarchy is :
option_<option name>.ini *
<material>/profile.ini **
<material>/option_<option name>.ini ***
<material>/<profile>/profile.ini

* This is for global options that affect all materials
** The profile.ini file represents the material itself
*** These options are specific to that material

The profile.ini file can contain a [profile] section to override default
profile settings, the profiles settings are loaded in this order :
material -> profile -> options
This allows a specific quality profile to override material profiles and
specific options can override everything else.
All profile.ini and option_*.ini files can also contain a [info] section
which can contain the following keys :
name = The name of the material/profile/option
disabled = 1/0 Whether or not to disable (not show the material/profile/option
               in the UI) this profile
default = 1/0 Whether this is the default material/profile to select
              This is only valid if the user has no valid saved selection
always_visible = 1/0 Whether or not to display the material/profile selection
                     in the UI if this is the only available material/profile
---

diff --git a/Cura/gui/mainWindow.py b/Cura/gui/mainWindow.py
index cb293be2..87b1ffc8 100644
--- a/Cura/gui/mainWindow.py
+++ b/Cura/gui/mainWindow.py
@@ -211,7 +211,7 @@ class mainWindow(wx.Frame):
 		self.scene = sceneView.SceneView(self.rightPane)
 
 		##Gui components##
-		self.simpleSettingsPanel = simpleMode.simpleModePanel(self.leftPane, self.scene.sceneUpdated)
+		self.simpleSettingsPanel = simpleMode.simpleModePanel(self.leftPane, self.simpleModeUpdated)
 		self.normalSettingsPanel = normalSettingsPanel(self.leftPane, self.scene.sceneUpdated)
 
 		self.leftSizer = wx.BoxSizer(wx.VERTICAL)
@@ -346,6 +346,14 @@ class mainWindow(wx.Frame):
 			print "Unable to read from clipboard"
 
 
+	def simpleModeUpdated(self):
+		self.leftPane.Layout()
+		if profile.getPreference('startMode') == 'Simple':
+			# Change location of sash to width of quick mode pane
+			(width, height) = self.simpleSettingsPanel.GetSizer().GetSize()
+			self.splitter.SetSashPosition(width, True)
+		self.scene.sceneUpdated()
+
 	def updateSliceMode(self, changedMode = True):
 		isSimple = profile.getPreference('startMode') == 'Simple'
 
@@ -467,7 +475,7 @@ class mainWindow(wx.Frame):
 		self.leftSizer.Detach(self.normalSettingsPanel)
 		self.simpleSettingsPanel.Destroy()
 		self.normalSettingsPanel.Destroy()
-		self.simpleSettingsPanel = simpleMode.simpleModePanel(self.leftPane, self.scene.sceneUpdated)
+		self.simpleSettingsPanel = simpleMode.simpleModePanel(self.leftPane, self.simpleModeUpdated)
 		self.normalSettingsPanel = normalSettingsPanel(self.leftPane, self.scene.sceneUpdated)
 		self.leftSizer.Add(self.simpleSettingsPanel, 1)
 		self.leftSizer.Add(self.normalSettingsPanel, 1, wx.EXPAND)
diff --git a/Cura/gui/simpleMode.py b/Cura/gui/simpleMode.py
index d1efb6a1..c52fa934 100644
--- a/Cura/gui/simpleMode.py
+++ b/Cura/gui/simpleMode.py
@@ -6,7 +6,6 @@ import os.path
 
 from Cura.util import profile
 from Cura.util import resources
-from Cura.util.simpleModeSettings import SimpleModeSettings
 
 class simpleModePanel(wx.Panel):
 	"Main user interface window for Quickprint mode"
@@ -14,94 +13,168 @@ class simpleModePanel(wx.Panel):
 		super(simpleModePanel, self).__init__(parent)
 		self._callback = callback
 
-		self._print_profile_options = []
 		self._print_material_options = []
+		self._print_profile_options = []
 		self._print_other_options = []
 
-		printTypePanel = wx.Panel(self)
-		for filename in resources.getSimpleModeProfiles():
-			cp = configparser.ConfigParser()
-			cp.read(filename)
-			base_filename = os.path.splitext(os.path.basename(filename))[0]
-			name = base_filename
-			if cp.has_option('info', 'name'):
-				name = cp.get('info', 'name')
-			button = wx.RadioButton(printTypePanel, -1, name, style=wx.RB_GROUP if len(self._print_profile_options) == 0 else 0)
-			button.base_filename = base_filename
-			button.filename = filename
-			self._print_profile_options.append(button)
-			if profile.getProfileSetting('simpleModeProfile') == base_filename:
-				button.SetValue(True)
-
-		printMaterialPanel = wx.Panel(self)
-		for filename in resources.getSimpleModeMaterials():
-			cp = configparser.ConfigParser()
-			cp.read(filename)
-			base_filename = os.path.splitext(os.path.basename(filename))[0]
-			name = base_filename
-			if cp.has_option('info', 'name'):
-				name = cp.get('info', 'name')
-			button = wx.RadioButton(printMaterialPanel, -1, name, style=wx.RB_GROUP if len(self._print_material_options) == 0 else 0)
-			button.base_filename = base_filename
-			button.filename = filename
+		materials = resources.getSimpleModeMaterials()
+
+		# Create material buttons
+		self.printMaterialPanel = wx.Panel(self)
+		selectedMaterial = None
+		for material in materials:
+			if material.disabled:
+				continue
+			button = wx.RadioButton(self.printMaterialPanel, -1, material.name,
+									style=wx.RB_GROUP if len(self._print_material_options) == 0 else 0)
+			button.profile = material
 			self._print_material_options.append(button)
-			if profile.getProfileSetting('simpleModeMaterial') == base_filename:
-				button.SetValue(True)
+			if profile.getProfileSetting('simpleModeMaterial') == material.name:
+				selectedMaterial = button
 
-		if profile.getMachineSetting('gcode_flavor') == 'UltiGCode':
-			printMaterialPanel.Show(False)
-
-		for filename in resources.getSimpleModeOptions():
-			cp = configparser.ConfigParser()
-			cp.read(filename)
-			base_filename = os.path.splitext(os.path.basename(filename))[0]
-			name = base_filename
-			if cp.has_option('info', 'name'):
-				name = cp.get('info', 'name')
-			button = wx.CheckBox(self, -1, name)
-			button.base_filename = base_filename
-			button.filename = filename
-			self._print_other_options.append(button)
+		# Decide on the default selected material
+		if selectedMaterial is None:
+			for button in self._print_material_options:
+				if button.profile.default:
+					selectedMaterial = button
+					break
+
+		if selectedMaterial is None and self._print_material_options > 0:
+			selectedMaterial = self._print_material_options[0]
+
+		# Decide to show the panel or not
+		if len(self._print_material_options) < 2:
+			self.printMaterialPanel.Show(self._print_material_options[0].profile.always_visible)
+
+		self.printTypePanel = wx.Panel(self)
 
 		sizer = wx.GridBagSizer()
 		self.SetSizer(sizer)
 
-		sb = wx.StaticBox(printTypePanel, label=_("Select a quickprint profile:"))
+		sb = wx.StaticBox(self.printMaterialPanel, label=_("Material:"))
 		boxsizer = wx.StaticBoxSizer(sb, wx.VERTICAL)
-		for button in self._print_profile_options:
+		boxsizer.SetMinSize((80, 20))
+		for button in self._print_material_options:
 			boxsizer.Add(button)
-		printTypePanel.SetSizer(wx.BoxSizer(wx.VERTICAL))
-		printTypePanel.GetSizer().Add(boxsizer, flag=wx.EXPAND)
-		sizer.Add(printTypePanel, (0,0), flag=wx.EXPAND)
+		self.printMaterialPanel.SetSizer(wx.BoxSizer(wx.VERTICAL))
+		self.printMaterialPanel.GetSizer().Add(boxsizer, flag=wx.EXPAND)
+		sizer.Add(self.printMaterialPanel, (0,0), border=10, flag=wx.EXPAND|wx.RIGHT|wx.LEFT|wx.TOP)
 
-		sb = wx.StaticBox(printMaterialPanel, label=_("Material:"))
+		sb = wx.StaticBox(self.printTypePanel, label=_("Select a quickprint profile:"))
 		boxsizer = wx.StaticBoxSizer(sb, wx.VERTICAL)
-		for button in self._print_material_options:
-			boxsizer.Add(button)
-		printMaterialPanel.SetSizer(wx.BoxSizer(wx.VERTICAL))
-		printMaterialPanel.GetSizer().Add(boxsizer, flag=wx.EXPAND)
-		sizer.Add(printMaterialPanel, (1,0), flag=wx.EXPAND)
+		boxsizer.SetMinSize((180, 20))
+		self.printTypePanel.SetSizer(wx.BoxSizer(wx.VERTICAL))
+		self.printTypePanel.GetSizer().Add(boxsizer, flag=wx.EXPAND)
+		sizer.Add(self.printTypePanel, (1,0), border=10, flag=wx.EXPAND|wx.RIGHT|wx.LEFT|wx.TOP)
 
-		sb = wx.StaticBox(self, label=_("Other:"))
+
+		sb = wx.StaticBox(self, label=_("Other options:"))
 		boxsizer = wx.StaticBoxSizer(sb, wx.VERTICAL)
-		for button in self._print_other_options:
-			boxsizer.Add(button)
-		sizer.Add(boxsizer, (2,0), flag=wx.EXPAND)
+		boxsizer.SetMinSize((100, 20))
+		sizer.Add(boxsizer, (2,0), border=10, flag=wx.EXPAND|wx.RIGHT|wx.LEFT|wx.TOP)
+		self.printOptionsSizer = boxsizer
 
-		for button in self._print_profile_options:
-			button.Bind(wx.EVT_RADIOBUTTON, self._update)
 		for button in self._print_material_options:
+			button.Bind(wx.EVT_RADIOBUTTON, self._materialSelected)
+
+		if selectedMaterial:
+			selectedMaterial.SetValue(True)
+			self._materialSelected(None)
+		self.Layout()
+
+	def _materialSelected(self, e):
+		material = None
+		for button in self._print_material_options:
+			if button.GetValue():
+				material = button.profile
+
+		# Delete profile options
+		boxsizer = self.printTypePanel.GetSizer().GetItem(0).GetSizer()
+		boxsizer.Clear(True)
+		self._print_profile_options = []
+
+		# Add new profiles
+		selectedProfile = None
+		for print_profile in material.profiles:
+			if print_profile.disabled:
+				continue
+			button = wx.RadioButton(self.printTypePanel, -1, print_profile.name,
+									style=wx.RB_GROUP if len(self._print_profile_options) == 0 else 0)
+			button.profile = print_profile
+			self._print_profile_options.append(button)
+			if profile.getProfileSetting('simpleModeProfile') == print_profile.name:
+				selectedProfile = button
+
+		# Decide on the profile to be selected by default
+		if selectedProfile is None:
+			for button in self._print_profile_options:
+				if button.profile.default:
+					selectedProfile = button
+					break
+
+		if selectedProfile is None and self._print_profile_options > 0:
+			selectedProfile = self._print_profile_options[0]
+
+		# Decide if we show the profile panel or not
+		if len(self._print_profile_options) < 2:
+			self.printProfilePanel.Show(self._print_profile_options[0].profile.always_visible)
+
+		if selectedProfile:
+			selectedProfile.SetValue(True)
+
+		# Add profiles to the UI
+		for button in self._print_profile_options:
+			boxsizer.Add(button)
 			button.Bind(wx.EVT_RADIOBUTTON, self._update)
+
+		# Save current selected options
+		selected_options = []
+		deselected_options = []
+		for button in self._print_other_options:
+			if button.GetValue():
+				selected_options.append(button.profile.name)
+			else:
+				deselected_options.append(button.profile.name)
+
+		# Delete profile options
+		boxsizer = self.printOptionsSizer
+		boxsizer.Clear(True)
+		self._print_other_options = []
+
+		# Create new options
+		for option in material.options:
+			if option.disabled:
+				continue
+			button = wx.CheckBox(self, -1, option.name)
+			button.profile = option
+			self._print_other_options.append(button)
+			# Restore selection on similarly named options
+			if option.name in selected_options or \
+			   ((not option.name in deselected_options) and option.default):
+				button.SetValue(True)
+
+		# Decide if we show the profile panel or not
+		# The always_visible doesn't make sense for options since they are checkboxes, and not radio buttons
+		if len(self._print_other_options) < 1:
+			self.printOptionsPanel.Show(False)
+
+		# Add profiles to the UI
 		for button in self._print_other_options:
+			boxsizer.Add(button)
 			button.Bind(wx.EVT_CHECKBOX, self._update)
+		self.Layout()
+
+		# Do not call the callback on the initial UI build
+		if e is not None:
+			self._update(e)
 
 	def _update(self, e):
-		for button in self._print_profile_options:
-			if button.GetValue():
-				profile.putProfileSetting('simpleModeProfile', button.base_filename)
 		for button in self._print_material_options:
 			if button.GetValue():
-				profile.putProfileSetting('simpleModeMaterial', button.base_filename)
+				profile.putProfileSetting('simpleModeMaterial', button.profile.name)
+		for button in self._print_profile_options:
+			if button.GetValue():
+				profile.putProfileSetting('simpleModeProfile', button.profile.name)
 		self._callback()
 
 	def getSettingOverrides(self):
@@ -110,51 +183,16 @@ class simpleModePanel(wx.Panel):
 			if setting.isProfile() or setting.isAlteration():
 				settings[setting.getName()] = setting.getDefault()
 
-		profile_setting = None
-		for button in self._print_profile_options:
-			if button.GetValue():
-				profile_setting = button.base_filename
-				break
-		material_setting = None
+		# Apply materials, profile, then options
 		for button in self._print_material_options:
 			if button.GetValue():
-				material_setting = button.base_filename
-				break
-		other_settings = []
-		for button in self._print_other_options:
-			if button.GetValue():
-				other_settings.append(button.base_filename)
-
-		simple_settings = SimpleModeSettings.getSimpleSettings(profile_setting, material_setting, other_settings)
-		for setting in simple_settings.keys():
-			settings[setting] = simple_settings[setting]
-
+				settings.update(button.profile.getProfileDict())
 		for button in self._print_profile_options:
 			if button.GetValue():
-				cp = configparser.ConfigParser()
-				cp.read(button.filename)
-				for setting in profile.settingsList:
-					if setting.isProfile() or setting.isAlteration():
-						if cp.has_option('profile', setting.getName()):
-							settings[setting.getName()] = cp.get('profile', setting.getName())
-		if profile.getMachineSetting('gcode_flavor') != 'UltiGCode':
-			for button in self._print_material_options:
-				if button.GetValue():
-					cp = configparser.ConfigParser()
-					cp.read(button.filename)
-					for setting in profile.settingsList:
-						if setting.isProfile() or setting.isAlteration():
-							if cp.has_option('profile', setting.getName()):
-								settings[setting.getName()] = cp.get('profile', setting.getName())
-
+				settings.update(button.profile.getProfileDict())
 		for button in self._print_other_options:
 			if button.GetValue():
-				cp = configparser.ConfigParser()
-				cp.read(button.filename)
-				for setting in profile.settingsList:
-					if setting.isProfile() or setting.isAlteration():
-						if cp.has_option('profile', setting.getName()):
-							settings[setting.getName()] = cp.get('profile', setting.getName())
+				settings.update(button.profile.getProfileDict())
 
 		return settings
 
diff --git a/Cura/util/resources.py b/Cura/util/resources.py
index a38525de..0c790b01 100644
--- a/Cura/util/resources.py
+++ b/Cura/util/resources.py
@@ -13,6 +13,7 @@ import locale
 
 import gettext
 import profile
+import ConfigParser as configparser
 
 if sys.platform.startswith('darwin'):
 	try:
@@ -52,30 +53,6 @@ def getDefaultMachineProfiles():
 	path = os.path.normpath(os.path.join(resourceBasePath, 'machine_profiles', '*.ini'))
 	return glob.glob(path)
 
-def getSimpleModeIniFiles(subdir, pattern = '*.ini'):
-	machine_type = profile.getMachineSetting('machine_type')
-	paths = []
-	paths.append(os.path.normpath(os.path.expanduser(os.path.join('~', '.Cura', 'quickprint', machine_type, subdir))))
-	paths.append(os.path.normpath(os.path.expanduser(os.path.join('~', '.Cura', 'quickprint', subdir))))
-	paths.append(os.path.normpath(os.path.join(resourceBasePath, 'quickprint', machine_type, subdir)))
-	paths.append(os.path.normpath(os.path.join(resourceBasePath, 'quickprint', subdir)))
-	for path in paths:
-		if os.path.isdir(path):
-			files = sorted(glob.glob(os.path.join(path, pattern)))
-			if len(files) > 0:
-				return files
-	return []
-
-
-def getSimpleModeProfiles():
-	return getSimpleModeIniFiles('profiles')
-
-def getSimpleModeMaterials():
-	return getSimpleModeIniFiles('materials')
-
-def getSimpleModeOptions():
-	return getSimpleModeIniFiles('options')
-
 def setupLocalization(selectedLanguage = None):
 	#Default to english
 	languages = ['en']
@@ -136,3 +113,145 @@ def getDefaultLocale():
 			pass
 
 	return defaultLocale
+
+class ProfileIni(object):
+	@staticmethod
+	def str2bool(str):
+		return False if str is None else str.lower() in ['true', 'yes', '1', 'y', 't']
+
+	def __init__(self, ini_file):
+		self.ini = ini_file
+		self.path = os.path.split(self.ini)[0]
+		self.base_name = os.path.splitext(os.path.basename(self.ini))[0]
+		if self.base_name == 'profile':
+			self.base_name = os.path.basename(self.path)
+		# Name to show in the UI
+		self.name = self._getProfileInfo(ini_file, 'name')
+		if self.name is None:
+			self.name = self.base_name
+		# default = The default profile to select
+		self.default = self.str2bool(self._getProfileInfo(self.ini, 'default'))
+		# disabled = do not make available in the UI
+		self.disabled = self.str2bool(self._getProfileInfo(self.ini, 'disabled'))
+		# always_visible = Always display in the UI even if it's the only available option
+		if self._getProfileInfo(self.ini, 'always_visible') is None:
+			self.always_visible = True
+		else:
+			self.always_visible = self.str2bool(self._getProfileInfo(self.ini, 'always_visible'))
+		try:
+			self.order = int(self._getProfileInfo(self.ini, 'order'))
+		except:
+			self.order = 0
+
+	def _getProfileInfo(self, ini_file, key):
+		cp = configparser.ConfigParser()
+		cp.read(ini_file)
+		disabled = False
+		if cp.has_option('info', key):
+			return cp.get('info', key)
+		return None
+
+	def _isInList(self, list):
+		""" Check if an option with the same base name already exists in the list """
+		for ini in list:
+			if ini.base_name == self.base_name:
+				return True
+		return False
+
+	def getProfileDict(self):
+		profile_dict = {}
+		cp = configparser.ConfigParser()
+		cp.read(self.ini)
+		for setting in profile.settingsList:
+			if setting.isProfile() or setting.isAlteration():
+				if cp.has_option('profile', setting.getName()):
+					profile_dict[setting.getName()] = cp.get('profile', setting.getName())
+
+		return profile_dict
+
+	def __cmp__(self, cmp):
+		if self.order < cmp.order:
+			return -1
+		elif self.order == cmp.order:
+			return 0
+		else:
+			return 1
+
+	def __str__ (self):
+		return "%s%s: %d" % (self.name, "(disabled)" if self.disabled else "", self.order)
+
+	def __repr__ (self):
+		return str(self)
+
+class PrintMaterial(ProfileIni):
+	def __init__(self, ini_file):
+		super(PrintMaterial, self).__init__(ini_file)
+
+		self.profiles = []
+		self.options = []
+
+		self.parseDirectory(self.path)
+
+	def parseDirectory(self, path):
+		profile_files = sorted(glob.glob(os.path.join(path, '*/profile.ini')))
+		if len(profile_files) > 0:
+			for profile_file in profile_files:
+				profile_ini = ProfileIni(profile_file)
+				if not profile_ini._isInList(self.profiles):
+					self.profiles.append(profile_ini)
+
+		option_files = sorted(glob.glob(os.path.join(path, 'option_*.ini')))
+		for option_file in option_files:
+			option = ProfileIni(option_file)
+			if not option._isInList(self.options):
+				self.options.append(option)
+
+		self.profiles.sort()
+		self.options.sort()
+
+	def addGlobalOptions(self, global_options):
+		for option in global_options:
+			if not option._isInList(self.options):
+				self.options.append(option)
+		self.options.sort()
+
+	def __str__ (self):
+		return "%s%s: %d - Profiles : %s - Options - %s\n" % (self.name, "(disabled)" if self.disabled else "",
+															  self.order, self.profiles, self.options)
+
+
+def getSimpleModeMaterials():
+	machine_type = profile.getMachineSetting('machine_type')
+	paths = []
+	paths.append(os.path.normpath(os.path.expanduser(os.path.join('~', '.Cura', 'quickprint', machine_type))))
+	paths.append(os.path.normpath(os.path.expanduser(os.path.join('~', '.Cura', 'quickprint'))))
+	paths.append(os.path.normpath(os.path.join(resourceBasePath, 'quickprint', machine_type)))
+	paths.append(os.path.normpath(os.path.join(resourceBasePath, 'quickprint')))
+
+	materials = []
+	global_options = []
+	for path in paths:
+		if os.path.isdir(path):
+			option_files = sorted(glob.glob(os.path.join(path, 'option_*.ini')))
+			for option_file in option_files:
+				option = ProfileIni(option_file)
+				if not option._isInList(global_options):
+					global_options.append(option)
+
+			material_files = sorted(glob.glob(os.path.join(path, '*/profile.ini')))
+			if len(material_files) > 0:
+				for material_file in material_files:
+					material = PrintMaterial(material_file)
+					if not material._isInList(materials):
+						materials.append(material)
+					else:
+						for ini in materials:
+							if ini.name == material.name:
+								ini.parseDirectory(os.path.split(material_file)[0])
+
+	materials.sort()
+	for material in materials:
+		material.addGlobalOptions(global_options)
+
+	#print "Materials found for %s :\n%s" % (machine_type, materials)
+	return materials
diff --git a/Cura/util/settings/__init__.py b/Cura/util/settings/__init__.py
deleted file mode 100644
index aa29a1a6..00000000
--- a/Cura/util/settings/__init__.py
+++ /dev/null
@@ -1,3 +0,0 @@
-from lulzbotMini import lulzbot_mini_settings
-from lulzbotTAZ4 import lulzbot_taz4_settings
-from lulzbotTAZ5 import lulzbot_taz5_settings, lulzbot_taz5_05nozzle_settings
diff --git a/Cura/util/settings/lulzbotMini.py b/Cura/util/settings/lulzbotMini.py
deleted file mode 100644
index 1c38be6b..00000000
--- a/Cura/util/settings/lulzbotMini.py
+++ /dev/null
@@ -1,79 +0,0 @@
-hips_low_settings = [('print_speed', '50'),
-					 ('infill_speed', '70'),
-					 ('inset0_speed', '40'),
-					 ('insetx_speed', '45'),
-					 ('cool_min_layer_time', '15'),
-					 ('cool_min_feedrate', '10')]
-
-hips_normal_settings = [('print_speed', '50'),
-						('infill_speed', '60'),
-						('inset0_speed', '30'),
-						('insetx_speed', '35'),
-						('cool_min_layer_time', '15'),
-						('cool_min_feedrate', '10')]
-
-hips_high_settings = [('print_speed', '30'),
-					  ('infill_speed', '30'),
-					  ('inset0_speed', '20'),
-					  ('insetx_speed', '25'),
-					  ('cool_min_layer_time', '20'),
-					  ('cool_min_feedrate', '5')]
-
-abs_low_settings = [('print_speed', '85'),
-					('infill_speed', '60'),
-					('inset0_speed', '50'),
-					('insetx_speed', '55'),
-					('cool_min_feedrate', '10')]
-
-abs_normal_settings = [('print_speed', '50'),
-					   ('infill_speed', '55'),
-					   ('inset0_speed', '45'),
-					   ('insetx_speed', '50'),
-					   ('cool_min_feedrate', '10')]
-
-abs_high_settings = [('print_speed', '50'),
-					 ('infill_speed', '40'),
-					 ('inset0_speed', '30'),
-					 ('insetx_speed', '35'),
-					 ('cool_min_feedrate', '5')]
-
-pla_low_settings = [('cool_min_feedrate', '10'),
-					('infill_speed', '40'),
-					('inset0_speed', '30'),
-					('insetx_speed', '35')]
-pla_normal_settings = [('cool_min_feedrate', '10'),
-					   ('infill_speed', '40'),
-					   ('inset0_speed', '30'),
-					   ('insetx_speed', '35')]
-pla_high_settings = [('cool_min_feedrate', '5'),
-					 ('infill_speed', '30'),
-					 ('inset0_speed', '25'),
-					 ('insetx_speed', '27')]
-
-# LulzBot Mini slice settings for use with the simple slice selection.
-lulzbot_mini_settings = [{'Ini': 'mini'},
-						 {'Material': '1_hips', 'Profile': '1_low',
-						  'Settings': hips_low_settings},
-						 {'Material': '1_hips', 'Profile': '2_normal',
-						  'Settings': hips_normal_settings},
-						 {'Material': '1_hips', 'Profile': '3_high',
-						  'Settings': hips_high_settings},
-
-						 {'Material': '2_abs', 'Profile': '1_low',
-						  'Settings': abs_low_settings},
-						 {'Material': '2_abs', 'Profile': '2_normal',
-						  'Settings': abs_normal_settings},
-						 {'Material': '2_abs', 'Profile': '3_high',
-						  'Settings': abs_high_settings},
-
-						 {'Material': '3_pla', 'Profile': '1_low',
-						  'Settings': pla_low_settings},
-						 {'Material': '3_pla', 'Profile': '2_normal',
-						  'Settings': pla_normal_settings},
-						 {'Material': '3_pla', 'Profile': '3_high',
-						  'Settings': pla_high_settings},
-
-						 {'Profile': '3_high',
-						  'Settings': [('layer_height', '0.18')]},
-						 {'Material': '3_pla', 'Profile': '3_high',
-						  'Settings': [('layer_height', '0.14')]}]
diff --git a/Cura/util/settings/lulzbotTAZ4.py b/Cura/util/settings/lulzbotTAZ4.py
deleted file mode 100644
index cc68695c..00000000
--- a/Cura/util/settings/lulzbotTAZ4.py
+++ /dev/null
@@ -1,60 +0,0 @@
-hips_low_settings = [('fan_full_height', '1'),
-					 ('fan_speed', '25'),
-					 ('fan_speed_max', '30')]
-hips_normal_settings = [('skirt_minimal_length', '250'),
-						('fan_full_height', '0.35'),
-						('fan_speed', '50'),
-						('fan_speed_max', '50')]
-hips_high_settings = [('fan_full_height', '0.56'),
-					  ('fan_speed', '50'),
-					  ('fan_speed_max', '60'),
-					  ('cool_min_feedrate', '8')]
-
-abs_low_settings = [('fan_full_height', '5'),
-					('fan_speed', '25'),
-					('fan_speed_max', '30')]
-abs_normal_settings = [('fan_speed', '25'),
-					   ('fan_speed_max', '25'),
-					   ('fill_overlap', '5')]
-abs_high_settings = [('retraction_hop', '0.1'),
-					 ('fan_full_height', '5'),
-					 ('fan_speed', '40'),
-					 ('fan_speed_max', '75')]
-
-
-pla_low_settings = [('skirt_minimal_length', '250'),
-					('fan_full_height', '1'),
-					('fan_speed', '75'),
-					('cool_min_feedrate', '15'),
-					('fill_overlap', '0')]
-pla_normal_settings = [('retraction_hop', '0.1'),
-					   ('skirt_minimal_length', '250'),
-					   ('fan_full_height', '1'),
-					   ('fan_speed', '75'),
-					   ('cool_min_feedrate', '15')]
-pla_high_settings = [('skirt_minimal_length', '0'),
-					 ('fan_full_height', '0.28'),
-					 ('fill_overlap', '10')]
-
-# LulzBot TAZ 4 slice settings for use with the simple slice selection.
-lulzbot_taz4_settings = [{'Ini': 'taz4'},
-						 {'Material': '1_hips', 'Profile': '1_low',
-						  'Settings': hips_low_settings},
-						 {'Material': '1_hips', 'Profile': '2_normal',
-						  'Settings': hips_normal_settings},
-						 {'Material': '1_hips', 'Profile': '3_high',
-						  'Settings': hips_high_settings},
-
-						 {'Material': '2_abs', 'Profile': '1_low',
-						  'Settings': abs_low_settings},
-						 {'Material': '2_abs', 'Profile': '2_normal',
-						  'Settings': abs_normal_settings},
-						 {'Material': '2_abs', 'Profile': '3_high',
-						  'Settings': abs_high_settings},
-
-						 {'Material': '3_pla', 'Profile': '1_low',
-						  'Settings': pla_low_settings},
-						 {'Material': '3_pla', 'Profile': '2_normal',
-						  'Settings': pla_normal_settings},
-						 {'Material': '3_pla', 'Profile': '3_high',
-						  'Settings': pla_high_settings}]
diff --git a/Cura/util/settings/lulzbotTAZ5.py b/Cura/util/settings/lulzbotTAZ5.py
deleted file mode 100644
index ea857df9..00000000
--- a/Cura/util/settings/lulzbotTAZ5.py
+++ /dev/null
@@ -1,96 +0,0 @@
-hips_low_settings = [('infill_speed', '70'),
-					 ('inset0_speed', '40'),
-					 ('insetx_speed', '45')]
-hips_normal_settings = [('infill_speed', '50'),
-						('inset0_speed', '30'),
-						('insetx_speed', '35')]
-hips_high_settings = [('infill_speed', '30'),
-					  ('inset0_speed', '20'),
-					  ('insetx_speed', '25')]
-
-abs_low_settings = [('infill_speed', '60'),
-					('inset0_speed', '50'),
-					('insetx_speed', '55'),
-					('cool_min_layer_time', '15')]
-abs_normal_settings = [('infill_speed', '55'),
-					   ('inset0_speed', '45'),
-					   ('insetx_speed', '50'),
-					   ('cool_min_layer_time', '15')]
-abs_high_settings = [('infill_speed', '40'),
-					 ('inset0_speed', '30'),
-					 ('insetx_speed', '35'),
-					 ('cool_min_layer_time', '20')]
-
-pla_low_settings = [('infill_speed', '80'),
-					('inset0_speed', '60'),
-					('insetx_speed', '70'),
-					('cool_min_layer_time', '15'),
-					('cool_min_feedrate', '15')]
-pla_normal_settings = [('infill_speed', '60'),
-					   ('inset0_speed', '50'),
-					   ('insetx_speed', '55'),
-					   ('cool_min_layer_time', '15'),
-					   ('cool_min_feedrate', '10')]
-pla_high_settings = [('infill_speed', '50'),
-					 ('inset0_speed', '40'),
-					 ('insetx_speed', '45'),
-					 ('cool_min_layer_time', '20'),
-					 ('cool_min_feedrate', '5')]
-
-# LulzBot TAZ 5 slice settings for use with the simple slice selection.
-lulzbot_taz5_settings = [{'Ini': 'taz5'},
-						 {'Material': '1_hips', 'Profile': '1_low',
-						  'Settings': hips_low_settings},
-						 {'Material': '1_hips', 'Profile': '2_normal',
-						  'Settings': hips_normal_settings},
-						 {'Material': '1_hips', 'Profile': '3_high',
-						  'Settings': hips_high_settings},
-
-						 {'Material': '2_abs', 'Profile': '1_low',
-						  'Settings': abs_low_settings},
-						 {'Material': '2_abs', 'Profile': '2_normal',
-						  'Settings': abs_normal_settings},
-						 {'Material': '2_abs', 'Profile': '3_high',
-						  'Settings': abs_high_settings},
-
-						 {'Material': '3_pla', 'Profile': '1_low',
-						  'Settings': pla_low_settings},
-						 {'Material': '3_pla', 'Profile': '2_normal',
-						  'Settings': pla_normal_settings},
-						 {'Material': '3_pla', 'Profile': '3_high',
-						  'Settings': pla_high_settings},
-
-						 {'Profile': '2_normal',
-						  'Settings': [('layer_height', '0.22'),
-									   ('solid_layer_thickness', '0.88')]},
-						 {'Material': '3_pla', 'Profile': '2_normal',
-						  'Settings': [('layer_height', '0.21'),
-									   ('solid_layer_thickness', '0.84')]},
-
-						 {'Profile': '3_high',
-						  'Settings': [('layer_height', '0.14'),
-									   ('solid_layer_thickness', '0.7')]},
-						 {'Material': '2_abs', 'Profile': '3_high',
-						  'Settings': [('layer_height', '0.16'),
-									   ('solid_layer_thickness', '0.74')]}]
-
-lulzbot_taz5_05nozzle_settings = [ {'Material': '1_hips', 'Profile': '1_low',
-									'Ini': "hips_low"},
-								   {'Material': '1_hips', 'Profile': '2_normal',
-									'Ini': "hips_normal"},
-								   {'Material': '1_hips', 'Profile': '3_high',
-									'Ini': "hips_high"},
-
-								   {'Material': '2_abs', 'Profile': '1_low',
-									'Ini': "abs_low"},
-								   {'Material': '2_abs', 'Profile': '2_normal',
-									'Ini': "abs_normal"},
-								   {'Material': '2_abs', 'Profile': '3_high',
-									'Ini': "abs_high"},
-
-								   {'Material': '3_pla', 'Profile': '1_low',
-									'Ini': "pla_low"},
-								   {'Material': '3_pla', 'Profile': '2_normal',
-									'Ini': "pla_normal"},
-								   {'Material': '3_pla', 'Profile': '3_high',
-									'Ini': "pla_high"}]
diff --git a/Cura/util/simpleModeSettings.py b/Cura/util/simpleModeSettings.py
deleted file mode 100644
index ef47f74d..00000000
--- a/Cura/util/simpleModeSettings.py
+++ /dev/null
@@ -1,90 +0,0 @@
-from Cura.util.settings import lulzbot_mini_settings, \
-		lulzbot_taz4_settings, \
-		lulzbot_taz5_settings, \
-		lulzbot_taz5_05nozzle_settings
-
-import ConfigParser as configparser
-from Cura.util import profile
-from Cura.util import resources
-
-class SimpleModeSettings(object):
-	# Set the Quickprint settings:
-	#
-	# Settings Format : Dictionary[machine_type] = machine_settings
-	#					Dictionary[None] = other_machine_settings
-	#
-	# Machine settings Format : List of setting dictionaries
-	# Setting dictionary Format: Dictionary['Material'] = material ini filename
-	#							 Dictionary['Profile'] = profile ini filename
-	#							 Dictionary['Options'] = list of other options ini filenames
-	#							 Dictionary['Ini'] = Ini filename to load from extra/ subdir
-	#							 Dictionary['Settings'] = Option settings
-	# Option settings format : List of tuples ('profile setting', 'value')
-	#										  ('profile setting', callable function)
-	# Example :
-	# settings['prusa_i3'] = [
-	#							{'Material': '1_pla', 'Profile': '2_normal', 'Ini': 'normal_pla'},
-	#							{'Material': '2_abs', 'Profile': '1_high', 'Ini': 'prusa_i3/high_abs'},
-	#							{'Material': '1_pla', 'Options': ['brim', 'support'],
-	#							  'Settings': [('support', _('Everywhere')), ('platform_adhesion', 'Brim')]
-	#							}
-	#						]
-	#
-	#
-	# All the settings in the list of machine settings will be checked. For
-	# each of those settings, the list of options will be verified and only the
-	# settings in which all the options match will be applied.
-	# The 'Settings' key in the dictionary will contain the settings to apply.
-	# Those settings will be a a list a tuples of key:value in which the value
-	# can be a callable function for greater control
-	#
-	# For example, a Dictionary with only 'Settings' will always be applied
-	# while a setting with {'Brim':True} will only be applied if the printBrim
-	# option is enabled, and settings with {'MaterialABS':True, 'TypeHigh':False}
-	# will only be applied for Low and Normal quality prints in ABS
-
-	settings = {"lulzbot_mini": lulzbot_mini_settings,
-				"lulzbot_TAZ_4": lulzbot_taz4_settings,
-				"lulzbot_TAZ_5": lulzbot_taz5_settings,
-				"lulzbot_TAZ_5_05nozzle": lulzbot_taz5_05nozzle_settings,
-				None: {}}
-
-
-	@staticmethod
-	def getSimpleSettings(profile_setting, material_setting, other_settings):
-		simple_settings = {}
-		machine_type = profile.getMachineSetting('machine_type')
-		if SimpleModeSettings.settings.has_key(machine_type):
-			machine_settings = SimpleModeSettings.settings[machine_type]
-		else:
-			machine_settings = SimpleModeSettings.settings[None]
-
-		for setting_dict in machine_settings:
-			settings = setting_dict.get('Settings', None)
-			ini = setting_dict.get('Ini', None)
-			print_material = setting_dict.get('Material', None)
-			print_profile = setting_dict.get('Profile', None)
-			print_others = setting_dict.get('Options', None)
-			# Check if the material/profile/other options match the settings
-			if (print_material is None or print_material == material_setting) and \
-			   (print_profile is None or print_profile == profile_setting) and \
-			   (print_others is None or len(set(print_others)) == len(set(print_others).intersection(set(other_settings)))):
-				if settings:
-					for item in settings:
-						if len(item) != 2 or not profile.isProfileSetting(item[0]):
-							continue
-						if hasattr(item[1], '__call__'):
-							simple_settings[item[0]] = item[1]()
-						else:
-							simple_settings[item[0]] = item[1]
-				if ini:
-					ini_file = resources.getSimpleModeIniFiles('extra', ini + '.ini')
-					if len(ini_file) > 0:
-						cp = configparser.ConfigParser()
-						cp.read(ini_file[0])
-						for setting in profile.settingsList:
-							if setting.isProfile() or setting.isAlteration():
-								if cp.has_option('profile', setting.getName()):
-									simple_settings[setting.getName()] = cp.get('profile', setting.getName())
-
-		return simple_settings
diff --git a/resources/quickprint/profiles/3_high.ini b/resources/quickprint/ABS/High/profile.ini
similarity index 86%
rename from resources/quickprint/profiles/3_high.ini
rename to resources/quickprint/ABS/High/profile.ini
index aa577d0c..8743486a 100644
--- a/resources/quickprint/profiles/3_high.ini
+++ b/resources/quickprint/ABS/High/profile.ini
@@ -1,5 +1,6 @@
 [info]
 name = High quality
+order = 2
 
 [profile]
 layer_height = 0.06
diff --git a/resources/quickprint/profiles/1_low.ini b/resources/quickprint/ABS/Low/profile.ini
similarity index 90%
rename from resources/quickprint/profiles/1_low.ini
rename to resources/quickprint/ABS/Low/profile.ini
index 8949423a..b04241b6 100644
--- a/resources/quickprint/profiles/1_low.ini
+++ b/resources/quickprint/ABS/Low/profile.ini
@@ -1,5 +1,6 @@
 [info]
 name = Fast print
+order = 0
 
 [profile]
 layer_height = 0.15
diff --git a/resources/quickprint/profiles/2_normal.ini b/resources/quickprint/ABS/Normal/profile.ini
similarity index 79%
rename from resources/quickprint/profiles/2_normal.ini
rename to resources/quickprint/ABS/Normal/profile.ini
index 6048e658..162cfaf2 100644
--- a/resources/quickprint/profiles/2_normal.ini
+++ b/resources/quickprint/ABS/Normal/profile.ini
@@ -1,5 +1,7 @@
 [info]
 name = Normal print
+order = 1
+default = 1
 
 [profile]
 layer_height = 0.1
diff --git a/resources/quickprint/profiles/4_ulti.ini b/resources/quickprint/ABS/Ulti/profile.ini
similarity index 86%
rename from resources/quickprint/profiles/4_ulti.ini
rename to resources/quickprint/ABS/Ulti/profile.ini
index 7da1f481..caa5b0ab 100644
--- a/resources/quickprint/profiles/4_ulti.ini
+++ b/resources/quickprint/ABS/Ulti/profile.ini
@@ -1,5 +1,6 @@
 [info]
 name = Ulti quality
+order = 3
 
 [profile]
 layer_height = 0.04
diff --git a/resources/quickprint/materials/2_abs.ini b/resources/quickprint/ABS/profile.ini
similarity index 94%
rename from resources/quickprint/materials/2_abs.ini
rename to resources/quickprint/ABS/profile.ini
index 7b91fd24..b480d183 100644
--- a/resources/quickprint/materials/2_abs.ini
+++ b/resources/quickprint/ABS/profile.ini
@@ -1,5 +1,6 @@
 [info]
 name = ABS
+order = 1
 
 [profile]
 print_bed_temperature = 100
diff --git a/resources/quickprint/PET/High/profile.ini b/resources/quickprint/PET/High/profile.ini
new file mode 100644
index 00000000..8743486a
--- /dev/null
+++ b/resources/quickprint/PET/High/profile.ini
@@ -0,0 +1,11 @@
+[info]
+name = High quality
+order = 2
+
+[profile]
+layer_height = 0.06
+infill_speed = 80
+solidarea_speed = 15
+inset0_speed = 30
+insetx_speed = 60
+
diff --git a/resources/quickprint/PET/Low/profile.ini b/resources/quickprint/PET/Low/profile.ini
new file mode 100644
index 00000000..b04241b6
--- /dev/null
+++ b/resources/quickprint/PET/Low/profile.ini
@@ -0,0 +1,14 @@
+[info]
+name = Fast print
+order = 0
+
+[profile]
+layer_height = 0.15
+wall_thickness = 1
+fill_density = 10
+bottom_layer_speed = 30
+infill_speed = 100
+solidarea_speed = 30
+inset0_speed = 40
+insetx_speed = 80
+cool_min_layer_time = 3
diff --git a/resources/quickprint/PET/Normal/profile.ini b/resources/quickprint/PET/Normal/profile.ini
new file mode 100644
index 00000000..162cfaf2
--- /dev/null
+++ b/resources/quickprint/PET/Normal/profile.ini
@@ -0,0 +1,12 @@
+[info]
+name = Normal print
+order = 1
+default = 1
+
+[profile]
+layer_height = 0.1
+infill_speed = 80
+solidarea_speed = 15
+inset0_speed = 30
+insetx_speed = 60
+
diff --git a/resources/quickprint/PET/Ulti/profile.ini b/resources/quickprint/PET/Ulti/profile.ini
new file mode 100644
index 00000000..caa5b0ab
--- /dev/null
+++ b/resources/quickprint/PET/Ulti/profile.ini
@@ -0,0 +1,11 @@
+[info]
+name = Ulti quality
+order = 3
+
+[profile]
+layer_height = 0.04
+infill_speed = 80
+solidarea_speed = 15
+inset0_speed = 30
+insetx_speed = 60
+
diff --git a/resources/quickprint/materials/3_pet.ini b/resources/quickprint/PET/profile.ini
similarity index 93%
rename from resources/quickprint/materials/3_pet.ini
rename to resources/quickprint/PET/profile.ini
index 9b906eef..4859fe39 100644
--- a/resources/quickprint/materials/3_pet.ini
+++ b/resources/quickprint/PET/profile.ini
@@ -1,5 +1,6 @@
 [info]
 name = U-PET
+order = 2
 
 [profile]
 print_bed_temperature = 60
diff --git a/resources/quickprint/PLA/High/profile.ini b/resources/quickprint/PLA/High/profile.ini
new file mode 100644
index 00000000..8743486a
--- /dev/null
+++ b/resources/quickprint/PLA/High/profile.ini
@@ -0,0 +1,11 @@
+[info]
+name = High quality
+order = 2
+
+[profile]
+layer_height = 0.06
+infill_speed = 80
+solidarea_speed = 15
+inset0_speed = 30
+insetx_speed = 60
+
diff --git a/resources/quickprint/PLA/Low/profile.ini b/resources/quickprint/PLA/Low/profile.ini
new file mode 100644
index 00000000..b04241b6
--- /dev/null
+++ b/resources/quickprint/PLA/Low/profile.ini
@@ -0,0 +1,14 @@
+[info]
+name = Fast print
+order = 0
+
+[profile]
+layer_height = 0.15
+wall_thickness = 1
+fill_density = 10
+bottom_layer_speed = 30
+infill_speed = 100
+solidarea_speed = 30
+inset0_speed = 40
+insetx_speed = 80
+cool_min_layer_time = 3
diff --git a/resources/quickprint/PLA/Normal/profile.ini b/resources/quickprint/PLA/Normal/profile.ini
new file mode 100644
index 00000000..162cfaf2
--- /dev/null
+++ b/resources/quickprint/PLA/Normal/profile.ini
@@ -0,0 +1,12 @@
+[info]
+name = Normal print
+order = 1
+default = 1
+
+[profile]
+layer_height = 0.1
+infill_speed = 80
+solidarea_speed = 15
+inset0_speed = 30
+insetx_speed = 60
+
diff --git a/resources/quickprint/PLA/Ulti/profile.ini b/resources/quickprint/PLA/Ulti/profile.ini
new file mode 100644
index 00000000..caa5b0ab
--- /dev/null
+++ b/resources/quickprint/PLA/Ulti/profile.ini
@@ -0,0 +1,11 @@
+[info]
+name = Ulti quality
+order = 3
+
+[profile]
+layer_height = 0.04
+infill_speed = 80
+solidarea_speed = 15
+inset0_speed = 30
+insetx_speed = 60
+
diff --git a/resources/quickprint/lulzbot_TAZ_4/materials/3_pla.ini b/resources/quickprint/PLA/profile.ini
similarity index 74%
rename from resources/quickprint/lulzbot_TAZ_4/materials/3_pla.ini
rename to resources/quickprint/PLA/profile.ini
index 784aedab..2a2632ad 100644
--- a/resources/quickprint/lulzbot_TAZ_4/materials/3_pla.ini
+++ b/resources/quickprint/PLA/profile.ini
@@ -1,4 +1,5 @@
 [info]
 name = PLA
+order = 0
 
 [profile]
diff --git a/resources/quickprint/lulzbot_TAZ_4/ABS/High/profile.ini b/resources/quickprint/lulzbot_TAZ_4/ABS/High/profile.ini
new file mode 100644
index 00000000..de9538ef
--- /dev/null
+++ b/resources/quickprint/lulzbot_TAZ_4/ABS/High/profile.ini
@@ -0,0 +1,260 @@
+[info]
+name = High Quality
+order = 2
+
+[profile]
+layer_height = .16
+wall_thickness = 1.05
+retraction_enable = True
+solid_layer_thickness = .74
+fill_density = 20
+nozzle_size = .35
+print_speed = 50
+print_temperature = 0
+print_temperature2 = 0
+print_temperature3 = 0
+print_temperature4 = 0
+print_bed_temperature = 0
+support = None
+platform_adhesion = None
+support_dual_extrusion = Both
+wipe_tower = False
+wipe_tower_volume = 15
+ooze_shield = False
+filament_diameter = 2.85
+filament_diameter2 = 0
+filament_diameter3 = 0
+filament_diameter4 = 0
+filament_flow = 100.0
+retraction_speed = 10
+retraction_amount = 1
+retraction_dual_amount = 16.5
+retraction_min_travel = 0.5
+retraction_combing = True
+retraction_minimal_extrusion = 0.005
+retraction_hop = 0.1
+bottom_thickness = .3
+layer0_width_factor = 125
+object_sink = 0.0
+overlap_dual = 0.15
+travel_speed = 175
+bottom_layer_speed = 15
+infill_speed = 40
+inset0_speed = 30
+insetx_speed = 35
+cool_min_layer_time = 20
+fan_enabled = True
+skirt_line_count = 1
+skirt_gap = 3.0
+skirt_minimal_length = 250
+fan_full_height = 0.5
+fan_speed = 40
+fan_speed_max = 60
+cool_min_feedrate = 10
+cool_head_lift = False
+solid_top = True
+solid_bottom = True
+fill_overlap = 15
+support_type = Lines
+support_angle = 45
+support_fill_rate = 30
+support_xy_distance = 0.7
+support_z_distance = 0.05
+spiralize = False
+simple_mode = False
+brim_line_count = 10
+raft_margin = 5.0
+raft_line_spacing = 3.0
+raft_base_thickness = 0.3
+raft_base_linewidth = 1.0
+raft_interface_thickness = 0.27
+raft_interface_linewidth = 0.4
+raft_airgap = 0.22
+raft_surface_layers = 2
+fix_horrible_union_all_type_a = True
+fix_horrible_union_all_type_b = False
+fix_horrible_use_open_bits = False
+fix_horrible_extensive_stitching = False
+plugin_config = 
+object_center_x = -1
+object_center_y = -1
+
+[alterations]
+start.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M109 S{print_temperature} ;Uncomment to add your own temperature line
+	G21                     ;metric values
+	G90                     ;absolute positioning
+	M82                     ;set extruder to absolute mode
+	M107                    ;start with the fan off
+	G28 X0 Y0               ;move X/Y to min endstops
+	G28 Z0                  ;move Z to min endstops
+	G1 Z15.0 F{travel_speed};move the platform down 15mm
+	G92 E0                  ; zero the extruded length
+	G1 F200 E0              ; extrude 3mm of feed stock
+	G92 E0                  ; zero the extruded length again
+	G1 F{travel_speed}      ; set travel speed
+	M203 X192 Y208 Z3       ; speed limits
+	M117 Printing...        ; send message to LCD
+	
+end.gcode = M400                           ; wait for buffer to clear
+	M104 S0                        ; hotend off
+	M140 S0                        ; heated bed heater off (if you have it)
+	M107                           ; fans off
+	G91                            ; relative positioning
+	G1 E-1 F300                    ; retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F3000   ; move Z up a bit and retract filament even more
+	G90                            ; absolute positioning
+	G1 X0 Y250                     ; move to cooling position
+	M84                            ; steppers off
+	G90                            ; absolute positioning
+	M117 TAZ Ready.
+	;{profile_string}
+	
+start2.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end2.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+start3.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T2                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end3.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M104 T2 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+start4.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T3                      ;Switch to the 4th extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T2                      ;Switch to the 3th extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end4.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M104 T2 S0                     ;extruder heater off
+	M104 T3 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+support_start.gcode = 
+support_end.gcode = 
+cool_start.gcode = 
+cool_end.gcode = 
+replace.csv = 
+preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+	;This code is added before the T(n)
+postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+	;This code is added after the T(n)
+
diff --git a/resources/quickprint/lulzbot_TAZ_4/ABS/Low/profile.ini b/resources/quickprint/lulzbot_TAZ_4/ABS/Low/profile.ini
new file mode 100644
index 00000000..8cb8b287
--- /dev/null
+++ b/resources/quickprint/lulzbot_TAZ_4/ABS/Low/profile.ini
@@ -0,0 +1,260 @@
+[info]
+name = Fast Print
+order = 0
+
+[profile]
+layer_height = .28
+wall_thickness = 1.05
+retraction_enable = True
+solid_layer_thickness = .84
+fill_density = 20
+nozzle_size = .35
+print_speed = 50
+print_temperature = 0
+print_temperature2 = 0
+print_temperature3 = 0
+print_temperature4 = 0
+print_bed_temperature = 0
+support = None
+platform_adhesion = None
+support_dual_extrusion = Both
+wipe_tower = False
+wipe_tower_volume = 15
+ooze_shield = False
+filament_diameter = 2.85
+filament_diameter2 = 0
+filament_diameter3 = 0
+filament_diameter4 = 0
+filament_flow = 100.0
+retraction_speed = 10
+retraction_amount = 1
+retraction_dual_amount = 16.5
+retraction_min_travel = 0.5
+retraction_combing = True
+retraction_minimal_extrusion = 0.005
+retraction_hop = 0.1
+bottom_thickness = .3
+layer0_width_factor = 125
+object_sink = 0.0
+overlap_dual = 0.15
+travel_speed = 175
+bottom_layer_speed = 15
+infill_speed = 60
+inset0_speed = 50
+insetx_speed = 55
+cool_min_layer_time = 15
+fan_enabled = True
+skirt_line_count = 1
+skirt_gap = 3.0
+skirt_minimal_length = 250
+fan_full_height = 0.5
+fan_speed = 40
+fan_speed_max = 60
+cool_min_feedrate = 10
+cool_head_lift = False
+solid_top = True
+solid_bottom = True
+fill_overlap = 15
+support_type = Lines
+support_angle = 45
+support_fill_rate = 30
+support_xy_distance = 0.7
+support_z_distance = 0.05
+spiralize = False
+simple_mode = False
+brim_line_count = 10
+raft_margin = 5.0
+raft_line_spacing = 3.0
+raft_base_thickness = 0.3
+raft_base_linewidth = 1.0
+raft_interface_thickness = 0.27
+raft_interface_linewidth = 0.4
+raft_airgap = 0.22
+raft_surface_layers = 2
+fix_horrible_union_all_type_a = True
+fix_horrible_union_all_type_b = False
+fix_horrible_use_open_bits = False
+fix_horrible_extensive_stitching = False
+plugin_config = 
+object_center_x = -1
+object_center_y = -1
+
+[alterations]
+start.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M109 S{print_temperature} ;Uncomment to add your own temperature line
+	G21                     ;metric values
+	G90                     ;absolute positioning
+	M82                     ;set extruder to absolute mode
+	M107                    ;start with the fan off
+	G28 X0 Y0               ;move X/Y to min endstops
+	G28 Z0                  ;move Z to min endstops
+	G1 Z15.0 F{travel_speed};move the platform down 15mm
+	G92 E0                  ; zero the extruded length
+	G1 F200 E0              ; extrude 3mm of feed stock
+	G92 E0                  ; zero the extruded length again
+	G1 F{travel_speed}      ; set travel speed
+	M203 X192 Y208 Z3       ; speed limits
+	M117 Printing...        ; send message to LCD
+	
+end.gcode = M400                           ; wait for buffer to clear
+	M104 S0                        ; hotend off
+	M140 S0                        ; heated bed heater off (if you have it)
+	M107                           ; fans off
+	G91                            ; relative positioning
+	G1 E-1 F300                    ; retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F3000   ; move Z up a bit and retract filament even more
+	G90                            ; absolute positioning
+	G1 X0 Y250                     ; move to cooling position
+	M84                            ; steppers off
+	G90                            ; absolute positioning
+	M117 TAZ Ready.
+	;{profile_string}
+	
+start2.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end2.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+start3.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T2                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end3.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M104 T2 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+start4.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T3                      ;Switch to the 4th extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T2                      ;Switch to the 3th extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end4.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M104 T2 S0                     ;extruder heater off
+	M104 T3 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+support_start.gcode = 
+support_end.gcode = 
+cool_start.gcode = 
+cool_end.gcode = 
+replace.csv = 
+preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+	;This code is added before the T(n)
+postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+	;This code is added after the T(n)
+
diff --git a/resources/quickprint/lulzbot_TAZ_4/ABS/Normal/profile.ini b/resources/quickprint/lulzbot_TAZ_4/ABS/Normal/profile.ini
new file mode 100644
index 00000000..eb96c340
--- /dev/null
+++ b/resources/quickprint/lulzbot_TAZ_4/ABS/Normal/profile.ini
@@ -0,0 +1,261 @@
+[info]
+name = Normal Quality
+order = 1
+default = 1
+
+[profile]
+layer_height = .22
+wall_thickness = 1.05
+retraction_enable = True
+solid_layer_thickness = .88
+fill_density = 20
+nozzle_size = .35
+print_speed = 50
+print_temperature = 0
+print_temperature2 = 0
+print_temperature3 = 0
+print_temperature4 = 0
+print_bed_temperature = 0
+support = None
+platform_adhesion = None
+support_dual_extrusion = Both
+wipe_tower = False
+wipe_tower_volume = 15
+ooze_shield = False
+filament_diameter = 2.85
+filament_diameter2 = 0
+filament_diameter3 = 0
+filament_diameter4 = 0
+filament_flow = 100.0
+retraction_speed = 10
+retraction_amount = 1
+retraction_dual_amount = 16.5
+retraction_min_travel = 0.5
+retraction_combing = True
+retraction_minimal_extrusion = 0.005
+retraction_hop = 0.1
+bottom_thickness = .3
+layer0_width_factor = 125
+object_sink = 0.0
+overlap_dual = 0.15
+travel_speed = 175
+bottom_layer_speed = 15
+infill_speed = 55
+inset0_speed = 45
+insetx_speed = 50
+cool_min_layer_time = 15
+fan_enabled = True
+skirt_line_count = 1
+skirt_gap = 3.0
+skirt_minimal_length = 250
+fan_full_height = 0.5
+fan_speed = 40
+fan_speed_max = 60
+cool_min_feedrate = 10
+cool_head_lift = False
+solid_top = True
+solid_bottom = True
+fill_overlap = 15
+support_type = Lines
+support_angle = 45
+support_fill_rate = 30
+support_xy_distance = 0.7
+support_z_distance = 0.05
+spiralize = False
+simple_mode = False
+brim_line_count = 10
+raft_margin = 5.0
+raft_line_spacing = 3.0
+raft_base_thickness = 0.3
+raft_base_linewidth = 1.0
+raft_interface_thickness = 0.27
+raft_interface_linewidth = 0.4
+raft_airgap = 0.22
+raft_surface_layers = 2
+fix_horrible_union_all_type_a = True
+fix_horrible_union_all_type_b = False
+fix_horrible_use_open_bits = False
+fix_horrible_extensive_stitching = False
+plugin_config = 
+object_center_x = -1
+object_center_y = -1
+
+[alterations]
+start.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M109 S{print_temperature} ;Uncomment to add your own temperature line
+	G21                     ;metric values
+	G90                     ;absolute positioning
+	M82                     ;set extruder to absolute mode
+	M107                    ;start with the fan off
+	G28 X0 Y0               ;move X/Y to min endstops
+	G28 Z0                  ;move Z to min endstops
+	G1 Z15.0 F{travel_speed};move the platform down 15mm
+	G92 E0                  ; zero the extruded length
+	G1 F200 E0              ; extrude 3mm of feed stock
+	G92 E0                  ; zero the extruded length again
+	G1 F{travel_speed}      ; set travel speed
+	M203 X192 Y208 Z3       ; speed limits
+	M117 Printing...        ; send message to LCD
+	
+end.gcode = M400                           ; wait for buffer to clear
+	M104 S0                        ; hotend off
+	M140 S0                        ; heated bed heater off (if you have it)
+	M107                           ; fans off
+	G91                            ; relative positioning
+	G1 E-1 F300                    ; retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F3000   ; move Z up a bit and retract filament even more
+	G90                            ; absolute positioning
+	G1 X0 Y250                     ; move to cooling position
+	M84                            ; steppers off
+	G90                            ; absolute positioning
+	M117 TAZ Ready.
+	;{profile_string}
+	
+start2.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end2.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+start3.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T2                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end3.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M104 T2 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+start4.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T3                      ;Switch to the 4th extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T2                      ;Switch to the 3th extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end4.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M104 T2 S0                     ;extruder heater off
+	M104 T3 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+support_start.gcode = 
+support_end.gcode = 
+cool_start.gcode = 
+cool_end.gcode = 
+replace.csv = 
+preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+	;This code is added before the T(n)
+postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+	;This code is added after the T(n)
+
diff --git a/resources/quickprint/lulzbot_TAZ_4/ABS/Ulti/profile.ini b/resources/quickprint/lulzbot_TAZ_4/ABS/Ulti/profile.ini
new file mode 100644
index 00000000..e60192f1
--- /dev/null
+++ b/resources/quickprint/lulzbot_TAZ_4/ABS/Ulti/profile.ini
@@ -0,0 +1,3 @@
+[info]
+name = Ulti quality
+disabled = True
diff --git a/resources/quickprint/lulzbot_TAZ_5_05nozzle/materials/2_abs.ini b/resources/quickprint/lulzbot_TAZ_4/ABS/profile.ini
similarity index 65%
rename from resources/quickprint/lulzbot_TAZ_5_05nozzle/materials/2_abs.ini
rename to resources/quickprint/lulzbot_TAZ_4/ABS/profile.ini
index af4e1c23..97adfc3e 100644
--- a/resources/quickprint/lulzbot_TAZ_5_05nozzle/materials/2_abs.ini
+++ b/resources/quickprint/lulzbot_TAZ_4/ABS/profile.ini
@@ -1,3 +1,4 @@
 [info]
 name = ABS
+order = 1
 
diff --git a/resources/quickprint/lulzbot_TAZ_4/HIPS/High/profile.ini b/resources/quickprint/lulzbot_TAZ_4/HIPS/High/profile.ini
new file mode 100644
index 00000000..35a4f97b
--- /dev/null
+++ b/resources/quickprint/lulzbot_TAZ_4/HIPS/High/profile.ini
@@ -0,0 +1,258 @@
+[info]
+name = High Quality
+order = 2
+
+[profile]
+layer_height = .14
+wall_thickness = 1.05
+retraction_enable = True
+solid_layer_thickness = .7
+fill_density = 20
+nozzle_size = .35
+print_speed = 50
+print_temperature = 0
+print_temperature2 = 0
+print_temperature3 = 0
+print_temperature4 = 0
+print_bed_temperature = 0
+support = None
+platform_adhesion = None
+support_dual_extrusion = Both
+wipe_tower = False
+wipe_tower_volume = 15
+ooze_shield = False
+filament_diameter = 2.85
+filament_diameter2 = 0
+filament_diameter3 = 0
+filament_diameter4 = 0
+filament_flow = 100.0
+retraction_speed = 10
+retraction_amount = 1
+retraction_dual_amount = 16.5
+retraction_min_travel = 0.5
+retraction_combing = True
+retraction_minimal_extrusion = 0.005
+retraction_hop = 0.1
+bottom_thickness = .3
+layer0_width_factor = 125
+object_sink = 0.0
+overlap_dual = 0.15
+travel_speed = 175
+bottom_layer_speed = 15
+infill_speed = 30
+inset0_speed = 20
+insetx_speed = 25
+cool_min_layer_time = 20
+fan_enabled = True
+skirt_line_count = 1
+skirt_gap = 3.0
+skirt_minimal_length = 250
+fan_full_height = 0.5
+fan_speed = 40
+fan_speed_max = 50
+cool_min_feedrate = 10
+cool_head_lift = False
+solid_top = True
+solid_bottom = True
+fill_overlap = 15
+support_type = Lines
+support_angle = 45
+support_fill_rate = 30
+support_xy_distance = 0.7
+support_z_distance = 0.05
+spiralize = False
+simple_mode = False
+brim_line_count = 10
+raft_margin = 5.0
+raft_line_spacing = 3.0
+raft_base_thickness = 0.3
+raft_base_linewidth = 1.0
+raft_interface_thickness = 0.27
+raft_interface_linewidth = 0.4
+raft_airgap = 0.35
+raft_surface_layers = 2
+fix_horrible_union_all_type_a = True
+fix_horrible_union_all_type_b = False
+fix_horrible_use_open_bits = False
+fix_horrible_extensive_stitching = False
+plugin_config = 
+object_center_x = -1
+object_center_y = -1
+
+[alterations]
+start.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M109 S{print_temperature} ;Uncomment to add your own temperature line
+	G21                     ;metric values
+	G90                     ;absolute positioning
+	M82                     ;set extruder to absolute mode
+	M107                    ;start with the fan off
+	G28 X0 Y0               ;move X/Y to min endstops
+	G28 Z0                  ;move Z to min endstops
+	G1 Z15.0 F{travel_speed};move the platform down 15mm
+	G92 E0                  ; zero the extruded length
+	G1 F200 E0              ; extrude 3mm of feed stock
+	G92 E0                  ; zero the extruded length again
+	G1 F{travel_speed}      ; set travel speed
+	M203 X192 Y208 Z3       ; speed limits
+	M117 Printing...        ; send message to LCD
+end.gcode = M400
+	M104 S0                        ; hotend off
+	M140 S0                        ; heated bed heater off (if you have it)
+	M107                           ; fans off
+	G91                            ; relative positioning
+	G1 E-1 F300                    ; retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F3000   ; move Z up a bit and retract filament even more
+	G90                            ; absolute positioning
+	G1 X0 Y250                     ; move to cooling position
+	M84                            ; steppers off
+	G90                            ; absolute positioning
+	M117 TAZ Ready.
+	;{profile_string}
+start2.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end2.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+start3.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T2                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end3.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M104 T2 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+start4.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T3                      ;Switch to the 4th extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T2                      ;Switch to the 3th extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end4.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M104 T2 S0                     ;extruder heater off
+	M104 T3 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+support_start.gcode = 
+support_end.gcode = 
+cool_start.gcode = 
+cool_end.gcode = 
+replace.csv = 
+preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+	;This code is added before the T(n)
+postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+	;This code is added after the T(n)
+
diff --git a/resources/quickprint/lulzbot_TAZ_4/HIPS/Low/profile.ini b/resources/quickprint/lulzbot_TAZ_4/HIPS/Low/profile.ini
new file mode 100644
index 00000000..96141e0e
--- /dev/null
+++ b/resources/quickprint/lulzbot_TAZ_4/HIPS/Low/profile.ini
@@ -0,0 +1,260 @@
+[info]
+name = Fast Print
+order = 0
+
+[profile]
+layer_height = .28
+wall_thickness = 1.05
+retraction_enable = True
+solid_layer_thickness = .84
+fill_density = 20
+nozzle_size = .35
+print_speed = 50
+print_temperature = 0
+print_temperature2 = 0
+print_temperature3 = 0
+print_temperature4 = 0
+print_bed_temperature = 0
+support = None
+platform_adhesion = None
+support_dual_extrusion = Both
+wipe_tower = False
+wipe_tower_volume = 15
+ooze_shield = False
+filament_diameter = 2.85
+filament_diameter2 = 0
+filament_diameter3 = 0
+filament_diameter4 = 0
+filament_flow = 100.0
+retraction_speed = 10
+retraction_amount = 1
+retraction_dual_amount = 16.5
+retraction_min_travel = 0.5
+retraction_combing = True
+retraction_minimal_extrusion = 0.005
+retraction_hop = 0.1
+bottom_thickness = .3
+layer0_width_factor = 125
+object_sink = 0.0
+overlap_dual = 0.15
+travel_speed = 175
+bottom_layer_speed = 15
+infill_speed = 70
+inset0_speed = 40
+insetx_speed = 45
+cool_min_layer_time = 20
+fan_enabled = True
+skirt_line_count = 1
+skirt_gap = 3.0
+skirt_minimal_length = 250
+fan_full_height = 0.5
+fan_speed = 40
+fan_speed_max = 50
+cool_min_feedrate = 10
+cool_head_lift = False
+solid_top = True
+solid_bottom = True
+fill_overlap = 15
+support_type = Lines
+support_angle = 45
+support_fill_rate = 30
+support_xy_distance = 0.7
+support_z_distance = 0.05
+spiralize = False
+simple_mode = False
+brim_line_count = 10
+raft_margin = 5.0
+raft_line_spacing = 3.0
+raft_base_thickness = 0.3
+raft_base_linewidth = 1.0
+raft_interface_thickness = 0.27
+raft_interface_linewidth = 0.4
+raft_airgap = 0.35
+raft_surface_layers = 2
+fix_horrible_union_all_type_a = True
+fix_horrible_union_all_type_b = False
+fix_horrible_use_open_bits = False
+fix_horrible_extensive_stitching = False
+plugin_config = 
+object_center_x = -1
+object_center_y = -1
+
+[alterations]
+start.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M109 S{print_temperature} ;Uncomment to add your own temperature line
+	G21                     ;metric values
+	G90                     ;absolute positioning
+	M82                     ;set extruder to absolute mode
+	M107                    ;start with the fan off
+	G28 X0 Y0               ;move X/Y to min endstops
+	G28 Z0                  ;move Z to min endstops
+	G1 Z15.0 F{travel_speed};move the platform down 15mm
+	G92 E0                  ; zero the extruded length
+	G1 F200 E0              ; extrude 3mm of feed stock
+	G92 E0                  ; zero the extruded length again
+	G1 F{travel_speed}      ; set travel speed
+	M203 X192 Y208 Z3       ; speed limits
+	M117 Printing...        ; send message to LCD
+	
+end.gcode = M400                           ; wait for buffer to clear
+	M104 S0                        ; hotend off
+	M140 S0                        ; heated bed heater off (if you have it)
+	M107                           ; fans off
+	G91                            ; relative positioning
+	G1 E-1 F300                    ; retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F3000   ; move Z up a bit and retract filament even more
+	G90                            ; absolute positioning
+	G1 X0 Y250                     ; move to cooling position
+	M84                            ; steppers off
+	G90                            ; absolute positioning
+	M117 TAZ Ready.
+	;{profile_string}
+	
+start2.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end2.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+start3.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T2                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end3.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M104 T2 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+start4.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T3                      ;Switch to the 4th extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T2                      ;Switch to the 3th extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end4.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M104 T2 S0                     ;extruder heater off
+	M104 T3 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+support_start.gcode = 
+support_end.gcode = 
+cool_start.gcode = 
+cool_end.gcode = 
+replace.csv = 
+preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+	;This code is added before the T(n)
+postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+	;This code is added after the T(n)
+
diff --git a/resources/quickprint/lulzbot_TAZ_4/HIPS/Normal/profile.ini b/resources/quickprint/lulzbot_TAZ_4/HIPS/Normal/profile.ini
new file mode 100644
index 00000000..0b42f04a
--- /dev/null
+++ b/resources/quickprint/lulzbot_TAZ_4/HIPS/Normal/profile.ini
@@ -0,0 +1,261 @@
+[info]
+name = Normal Quality
+order = 1
+default = 1
+
+[profile]
+layer_height = .22
+wall_thickness = 1.05
+retraction_enable = True
+solid_layer_thickness = .88
+fill_density = 20
+nozzle_size = .35
+print_speed = 50
+print_temperature = 0
+print_temperature2 = 0
+print_temperature3 = 0
+print_temperature4 = 0
+print_bed_temperature = 0
+support = None
+platform_adhesion = None
+support_dual_extrusion = Both
+wipe_tower = False
+wipe_tower_volume = 15
+ooze_shield = False
+filament_diameter = 2.85
+filament_diameter2 = 0
+filament_diameter3 = 0
+filament_diameter4 = 0
+filament_flow = 100.0
+retraction_speed = 10
+retraction_amount = 1
+retraction_dual_amount = 16.5
+retraction_min_travel = 0.5
+retraction_combing = True
+retraction_minimal_extrusion = 0.005
+retraction_hop = 0.1
+bottom_thickness = .3
+layer0_width_factor = 125
+object_sink = 0.0
+overlap_dual = 0.15
+travel_speed = 175
+bottom_layer_speed = 15
+infill_speed = 50
+inset0_speed = 30
+insetx_speed = 35
+cool_min_layer_time = 20
+fan_enabled = True
+skirt_line_count = 1
+skirt_gap = 3.0
+skirt_minimal_length = 250
+fan_full_height = 0.5
+fan_speed = 40
+fan_speed_max = 50
+cool_min_feedrate = 10
+cool_head_lift = False
+solid_top = True
+solid_bottom = True
+fill_overlap = 15
+support_type = Lines
+support_angle = 45
+support_fill_rate = 30
+support_xy_distance = 0.7
+support_z_distance = 0.05
+spiralize = False
+simple_mode = False
+brim_line_count = 10
+raft_margin = 5.0
+raft_line_spacing = 3.0
+raft_base_thickness = 0.3
+raft_base_linewidth = 1.0
+raft_interface_thickness = 0.27
+raft_interface_linewidth = 0.4
+raft_airgap = 0.35
+raft_surface_layers = 2
+fix_horrible_union_all_type_a = True
+fix_horrible_union_all_type_b = False
+fix_horrible_use_open_bits = False
+fix_horrible_extensive_stitching = False
+plugin_config = 
+object_center_x = -1
+object_center_y = -1
+
+[alterations]
+start.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M109 S{print_temperature} ;Uncomment to add your own temperature line
+	G21                     ;metric values
+	G90                     ;absolute positioning
+	M82                     ;set extruder to absolute mode
+	M107                    ;start with the fan off
+	G28 X0 Y0               ;move X/Y to min endstops
+	G28 Z0                  ;move Z to min endstops
+	G1 Z15.0 F{travel_speed};move the platform down 15mm
+	G92 E0                  ; zero the extruded length
+	G1 F200 E0              ; extrude 3mm of feed stock
+	G92 E0                  ; zero the extruded length again
+	G1 F{travel_speed}      ; set travel speed
+	M203 X192 Y208 Z3       ; speed limits
+	M117 Printing...        ; send message to LCD
+	
+end.gcode = M400                           ; wait for buffer to clear
+	M104 S0                        ; hotend off
+	M140 S0                        ; heated bed heater off (if you have it)
+	M107                           ; fans off
+	G91                            ; relative positioning
+	G1 E-1 F300                    ; retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F3000   ; move Z up a bit and retract filament even more
+	G90                            ; absolute positioning
+	G1 X0 Y250                     ; move to cooling position
+	M84                            ; steppers off
+	G90                            ; absolute positioning
+	M117 TAZ Ready.
+	;{profile_string}
+	
+start2.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end2.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+start3.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T2                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end3.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M104 T2 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+start4.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T3                      ;Switch to the 4th extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T2                      ;Switch to the 3th extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end4.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M104 T2 S0                     ;extruder heater off
+	M104 T3 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+support_start.gcode = 
+support_end.gcode = 
+cool_start.gcode = 
+cool_end.gcode = 
+replace.csv = 
+preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+	;This code is added before the T(n)
+postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+	;This code is added after the T(n)
+
diff --git a/resources/quickprint/lulzbot_TAZ_4/materials/1_hips.ini b/resources/quickprint/lulzbot_TAZ_4/HIPS/profile.ini
similarity index 66%
rename from resources/quickprint/lulzbot_TAZ_4/materials/1_hips.ini
rename to resources/quickprint/lulzbot_TAZ_4/HIPS/profile.ini
index 61fc3373..e4090d25 100644
--- a/resources/quickprint/lulzbot_TAZ_4/materials/1_hips.ini
+++ b/resources/quickprint/lulzbot_TAZ_4/HIPS/profile.ini
@@ -1,4 +1,4 @@
 [info]
 name = HIPS
+order = 0
 
-[profile]
diff --git a/resources/quickprint/lulzbot_TAZ_4/PET/profile.ini b/resources/quickprint/lulzbot_TAZ_4/PET/profile.ini
new file mode 100644
index 00000000..84259445
--- /dev/null
+++ b/resources/quickprint/lulzbot_TAZ_4/PET/profile.ini
@@ -0,0 +1,2 @@
+[info]
+disabled = True
diff --git a/resources/quickprint/lulzbot_TAZ_4/PLA/High/profile.ini b/resources/quickprint/lulzbot_TAZ_4/PLA/High/profile.ini
new file mode 100644
index 00000000..1af0bfb5
--- /dev/null
+++ b/resources/quickprint/lulzbot_TAZ_4/PLA/High/profile.ini
@@ -0,0 +1,258 @@
+[info]
+name = High Quality
+order = 2
+
+[profile]
+layer_height = .14
+wall_thickness = 1.05
+retraction_enable = True
+solid_layer_thickness = .7
+fill_density = 20
+nozzle_size = .35
+print_speed = 50
+print_temperature = 0
+print_temperature2 = 0
+print_temperature3 = 0
+print_temperature4 = 0
+print_bed_temperature = 0
+support = None
+platform_adhesion = None
+support_dual_extrusion = Both
+wipe_tower = False
+wipe_tower_volume = 15
+ooze_shield = False
+filament_diameter = 2.85
+filament_diameter2 = 0
+filament_diameter3 = 0
+filament_diameter4 = 0
+filament_flow = 100.0
+retraction_speed = 10
+retraction_amount = 1.5
+retraction_dual_amount = 16.5
+retraction_min_travel = 0.5
+retraction_combing = True
+retraction_minimal_extrusion = 0.005
+retraction_hop = 0.1
+bottom_thickness = .3
+layer0_width_factor = 125
+object_sink = 0.0
+overlap_dual = 0.15
+travel_speed = 175
+bottom_layer_speed = 15
+infill_speed = 50
+inset0_speed = 40
+insetx_speed = 45
+cool_min_layer_time = 20
+fan_enabled = True
+skirt_line_count = 1
+skirt_gap = 3.0
+skirt_minimal_length = 250
+fan_full_height = 0.5
+fan_speed = 75
+fan_speed_max = 100
+cool_min_feedrate = 5
+cool_head_lift = False
+solid_top = True
+solid_bottom = True
+fill_overlap = 15
+support_type = Lines
+support_angle = 45
+support_fill_rate = 30
+support_xy_distance = 0.7
+support_z_distance = 0.05
+spiralize = False
+simple_mode = False
+brim_line_count = 10
+raft_margin = 5.0
+raft_line_spacing = 3.0
+raft_base_thickness = 0.3
+raft_base_linewidth = 1.0
+raft_interface_thickness = 0.27
+raft_interface_linewidth = 0.4
+raft_airgap = 0.35
+raft_surface_layers = 2
+fix_horrible_union_all_type_a = True
+fix_horrible_union_all_type_b = False
+fix_horrible_use_open_bits = False
+fix_horrible_extensive_stitching = False
+plugin_config = 
+object_center_x = -1
+object_center_y = -1
+
+[alterations]
+start.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M109 S{print_temperature} ;Uncomment to add your own temperature line
+	G21                     ;metric values
+	G90                     ;absolute positioning
+	M82                     ;set extruder to absolute mode
+	M107                    ;start with the fan off
+	G28 X0 Y0               ;move X/Y to min endstops
+	G28 Z0                  ;move Z to min endstops
+	G1 Z15.0 F{travel_speed};move the platform down 15mm
+	G92 E0                  ; zero the extruded length
+	G1 F200 E0              ; extrude 3mm of feed stock
+	G92 E0                  ; zero the extruded length again
+	G1 F{travel_speed}      ; set travel speed
+	M203 X192 Y208 Z3       ; speed limits
+	M117 Printing...        ; send message to LCD
+end.gcode = M400
+	M104 S0                        ; hotend off
+	M140 S0                        ; heated bed heater off (if you have it)
+	M107                           ; fans off
+	G91                            ; relative positioning
+	G1 E-1 F300                    ; retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F3000   ; move Z up a bit and retract filament even more
+	G90                            ; absolute positioning
+	G1 X0 Y250                     ; move to cooling position
+	M84                            ; steppers off
+	G90                            ; absolute positioning
+	M117 TAZ Ready.
+	;{profile_string}
+start2.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end2.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+start3.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T2                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end3.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M104 T2 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+start4.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T3                      ;Switch to the 4th extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T2                      ;Switch to the 3th extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end4.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M104 T2 S0                     ;extruder heater off
+	M104 T3 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+support_start.gcode = 
+support_end.gcode = 
+cool_start.gcode = 
+cool_end.gcode = 
+replace.csv = 
+preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+	;This code is added before the T(n)
+postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+	;This code is added after the T(n)
+
diff --git a/resources/quickprint/lulzbot_TAZ_4/PLA/Low/profile.ini b/resources/quickprint/lulzbot_TAZ_4/PLA/Low/profile.ini
new file mode 100644
index 00000000..d750173d
--- /dev/null
+++ b/resources/quickprint/lulzbot_TAZ_4/PLA/Low/profile.ini
@@ -0,0 +1,258 @@
+[info]
+name = Fast Print
+order = 0
+
+[profile]
+layer_height = .28
+wall_thickness = 1.05
+retraction_enable = True
+solid_layer_thickness = .84
+fill_density = 20
+nozzle_size = .35
+print_speed = 50
+print_temperature = 0
+print_temperature2 = 0
+print_temperature3 = 0
+print_temperature4 = 0
+print_bed_temperature = 0
+support = None
+platform_adhesion = None
+support_dual_extrusion = Both
+wipe_tower = False
+wipe_tower_volume = 15
+ooze_shield = False
+filament_diameter = 2.85
+filament_diameter2 = 0
+filament_diameter3 = 0
+filament_diameter4 = 0
+filament_flow = 100.0
+retraction_speed = 10
+retraction_amount = 1.5
+retraction_dual_amount = 16.5
+retraction_min_travel = 0.5
+retraction_combing = True
+retraction_minimal_extrusion = 0.005
+retraction_hop = 0.1
+bottom_thickness = .3
+layer0_width_factor = 125
+object_sink = 0.0
+overlap_dual = 0.15
+travel_speed = 175
+bottom_layer_speed = 15
+infill_speed = 80
+inset0_speed = 60
+insetx_speed = 70
+cool_min_layer_time = 15
+fan_enabled = True
+skirt_line_count = 1
+skirt_gap = 3.0
+skirt_minimal_length = 250
+fan_full_height = 0.5
+fan_speed = 75
+fan_speed_max = 100
+cool_min_feedrate = 15
+cool_head_lift = False
+solid_top = True
+solid_bottom = True
+fill_overlap = 15
+support_type = Lines
+support_angle = 45
+support_fill_rate = 30
+support_xy_distance = 0.7
+support_z_distance = 0.05
+spiralize = False
+simple_mode = False
+brim_line_count = 10
+raft_margin = 5.0
+raft_line_spacing = 3.0
+raft_base_thickness = 0.3
+raft_base_linewidth = 1.0
+raft_interface_thickness = 0.27
+raft_interface_linewidth = 0.4
+raft_airgap = 0.35
+raft_surface_layers = 2
+fix_horrible_union_all_type_a = True
+fix_horrible_union_all_type_b = False
+fix_horrible_use_open_bits = False
+fix_horrible_extensive_stitching = False
+plugin_config = 
+object_center_x = -1
+object_center_y = -1
+
+[alterations]
+start.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M109 S{print_temperature} ;Uncomment to add your own temperature line
+	G21                     ;metric values
+	G90                     ;absolute positioning
+	M82                     ;set extruder to absolute mode
+	M107                    ;start with the fan off
+	G28 X0 Y0               ;move X/Y to min endstops
+	G28 Z0                  ;move Z to min endstops
+	G1 Z15.0 F{travel_speed};move the platform down 15mm
+	G92 E0                  ; zero the extruded length
+	G1 F200 E0              ; extrude 3mm of feed stock
+	G92 E0                  ; zero the extruded length again
+	G1 F{travel_speed}      ; set travel speed
+	M203 X192 Y208 Z3       ; speed limits
+	M117 Printing...        ; send message to LCD
+end.gcode = M400
+	M104 S0                        ; hotend off
+	M140 S0                        ; heated bed heater off (if you have it)
+	M107                           ; fans off
+	G91                            ; relative positioning
+	G1 E-1 F300                    ; retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F3000   ; move Z up a bit and retract filament even more
+	G90                            ; absolute positioning
+	G1 X0 Y250                     ; move to cooling position
+	M84                            ; steppers off
+	G90                            ; absolute positioning
+	M117 TAZ Ready.
+	;{profile_string}
+start2.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end2.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+start3.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T2                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end3.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M104 T2 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+start4.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T3                      ;Switch to the 4th extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T2                      ;Switch to the 3th extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end4.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M104 T2 S0                     ;extruder heater off
+	M104 T3 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+support_start.gcode = 
+support_end.gcode = 
+cool_start.gcode = 
+cool_end.gcode = 
+replace.csv = 
+preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+	;This code is added before the T(n)
+postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+	;This code is added after the T(n)
+
diff --git a/resources/quickprint/lulzbot_TAZ_4/PLA/Normal/profile.ini b/resources/quickprint/lulzbot_TAZ_4/PLA/Normal/profile.ini
new file mode 100644
index 00000000..09a8d9f1
--- /dev/null
+++ b/resources/quickprint/lulzbot_TAZ_4/PLA/Normal/profile.ini
@@ -0,0 +1,259 @@
+[info]
+name = Normal Quality
+order = 1
+default = 1
+
+[profile]
+layer_height = .21
+wall_thickness = 1.05
+retraction_enable = True
+solid_layer_thickness = .84
+fill_density = 20
+nozzle_size = .35
+print_speed = 50
+print_temperature = 0
+print_temperature2 = 0
+print_temperature3 = 0
+print_temperature4 = 0
+print_bed_temperature = 0
+support = None
+platform_adhesion = None
+support_dual_extrusion = Both
+wipe_tower = False
+wipe_tower_volume = 15
+ooze_shield = False
+filament_diameter = 2.85
+filament_diameter2 = 0
+filament_diameter3 = 0
+filament_diameter4 = 0
+filament_flow = 100.0
+retraction_speed = 10
+retraction_amount = 1.5
+retraction_dual_amount = 16.5
+retraction_min_travel = 0.5
+retraction_combing = True
+retraction_minimal_extrusion = 0.005
+retraction_hop = 0.1
+bottom_thickness = .3
+layer0_width_factor = 125
+object_sink = 0.0
+overlap_dual = 0.15
+travel_speed = 175
+bottom_layer_speed = 15
+infill_speed = 60
+inset0_speed = 50
+insetx_speed = 55
+cool_min_layer_time = 15
+fan_enabled = True
+skirt_line_count = 1
+skirt_gap = 3.0
+skirt_minimal_length = 250
+fan_full_height = 0.5
+fan_speed = 75
+fan_speed_max = 100
+cool_min_feedrate = 10
+cool_head_lift = False
+solid_top = True
+solid_bottom = True
+fill_overlap = 15
+support_type = Lines
+support_angle = 45
+support_fill_rate = 30
+support_xy_distance = 0.7
+support_z_distance = 0.05
+spiralize = False
+simple_mode = False
+brim_line_count = 10
+raft_margin = 5.0
+raft_line_spacing = 3.0
+raft_base_thickness = 0.3
+raft_base_linewidth = 1.0
+raft_interface_thickness = 0.27
+raft_interface_linewidth = 0.4
+raft_airgap = 0.35
+raft_surface_layers = 2
+fix_horrible_union_all_type_a = True
+fix_horrible_union_all_type_b = False
+fix_horrible_use_open_bits = False
+fix_horrible_extensive_stitching = False
+plugin_config = 
+object_center_x = -1
+object_center_y = -1
+
+[alterations]
+start.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M109 S{print_temperature} ;Uncomment to add your own temperature line
+	G21                     ;metric values
+	G90                     ;absolute positioning
+	M82                     ;set extruder to absolute mode
+	M107                    ;start with the fan off
+	G28 X0 Y0               ;move X/Y to min endstops
+	G28 Z0                  ;move Z to min endstops
+	G1 Z15.0 F{travel_speed};move the platform down 15mm
+	G92 E0                  ; zero the extruded length
+	G1 F200 E0              ; extrude 3mm of feed stock
+	G92 E0                  ; zero the extruded length again
+	G1 F{travel_speed}      ; set travel speed
+	M203 X192 Y208 Z3       ; speed limits
+	M117 Printing...        ; send message to LCD
+end.gcode = M400
+	M104 S0                        ; hotend off
+	M140 S0                        ; heated bed heater off (if you have it)
+	M107                           ; fans off
+	G91                            ; relative positioning
+	G1 E-1 F300                    ; retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F3000   ; move Z up a bit and retract filament even more
+	G90                            ; absolute positioning
+	G1 X0 Y250                     ; move to cooling position
+	M84                            ; steppers off
+	G90                            ; absolute positioning
+	M117 TAZ Ready.
+	;{profile_string}
+start2.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end2.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+start3.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T2                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end3.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M104 T2 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+start4.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T3                      ;Switch to the 4th extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T2                      ;Switch to the 3th extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end4.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M104 T2 S0                     ;extruder heater off
+	M104 T3 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+support_start.gcode = 
+support_end.gcode = 
+cool_start.gcode = 
+cool_end.gcode = 
+replace.csv = 
+preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+	;This code is added before the T(n)
+postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+	;This code is added after the T(n)
+
diff --git a/resources/quickprint/lulzbot_TAZ_4/PLA/Ulti/profile.ini b/resources/quickprint/lulzbot_TAZ_4/PLA/Ulti/profile.ini
new file mode 100644
index 00000000..e60192f1
--- /dev/null
+++ b/resources/quickprint/lulzbot_TAZ_4/PLA/Ulti/profile.ini
@@ -0,0 +1,3 @@
+[info]
+name = Ulti quality
+disabled = True
diff --git a/resources/quickprint/lulzbot_TAZ_5_05nozzle/materials/3_pla.ini b/resources/quickprint/lulzbot_TAZ_4/PLA/profile.ini
similarity index 65%
rename from resources/quickprint/lulzbot_TAZ_5_05nozzle/materials/3_pla.ini
rename to resources/quickprint/lulzbot_TAZ_4/PLA/profile.ini
index 8917ab88..a70247b8 100644
--- a/resources/quickprint/lulzbot_TAZ_5_05nozzle/materials/3_pla.ini
+++ b/resources/quickprint/lulzbot_TAZ_4/PLA/profile.ini
@@ -1,3 +1,4 @@
 [info]
 name = PLA
+order = 2
 
diff --git a/resources/quickprint/lulzbot_TAZ_4/extra/taz4.ini b/resources/quickprint/lulzbot_TAZ_4/extra/taz4.ini
deleted file mode 100644
index b5b2254e..00000000
--- a/resources/quickprint/lulzbot_TAZ_4/extra/taz4.ini
+++ /dev/null
@@ -1,42 +0,0 @@
-[profile]
-filament_diameter = 2.85
-nozzle_size = 0.35
-wall_thickness = 1.05
-solid_layer_thickness = 0.84
-retraction_amount = 1.5
-layer0_width_factor = 125
-print_temperature = 0
-print_bed_temperature = 0
-bottom_layer_speed = 30
-travel_speed = 175
-cool_min_layer_time = 15
-retraction_speed = 25
-start.gcode = ;This Gcode has been generated specifically for the LulzBot TAZ 4
-	;Sliced at: {day} {date} {time}
-	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
-	;Filament Diameter: {filament_diameter}
-	;Print time: {print_time}
-	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
-	;M109 S{print_temperature} ;Uncomment to add your own temperature line
-	G21        ;metric values
-	G90        ;absolute positioning
-	M82        ;set extruder to absolute mode
-	M107       ;start with the fan off
-	G28 X0 Y0  ;move X/Y to min endstops
-	G28 Z0     ;move Z to min endstops
-	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
-	G92 E0                  ;zero the extruded length
-	G1 F200 E0              ;extrude 3mm of feed stock
-	G92 E0                  ;zero the extruded length again
-	G1 F{travel_speed}
-	M203 X192 Y208 Z3 ;speed limits
-end.gcode = M400
-	M104 S0                                        ; Hotend off
-	M140 S0                                        ;heated bed heater off (if you have it)
-	M107                                             ; fans off
-	G91                                                ;relative positioning
-	G1 E-1 F300                                  ;retract the filament a bit before lifting the nozzle, to release some of the pressure
-	G1 Z+0.5 E-5 X-20 Y-20 F3000    ;move Z up a bit and retract filament even more
-	M84                                                 ;steppers off
-	G90                                                 ;absolute positioning
-	;{profile_string}
diff --git a/resources/quickprint/lulzbot_TAZ_4/profiles/1_low.ini b/resources/quickprint/lulzbot_TAZ_4/profiles/1_low.ini
deleted file mode 100644
index 397d3c4a..00000000
--- a/resources/quickprint/lulzbot_TAZ_4/profiles/1_low.ini
+++ /dev/null
@@ -1,10 +0,0 @@
-[info]
-name = Fast print
-
-[profile]
-layer_height = 0.28
-print_speed = 120
-retraction_hop = 0.1
-inset0_speed = 80
-insetx_speed = 100
-
diff --git a/resources/quickprint/lulzbot_TAZ_4/profiles/2_normal.ini b/resources/quickprint/lulzbot_TAZ_4/profiles/2_normal.ini
deleted file mode 100644
index 77162ecb..00000000
--- a/resources/quickprint/lulzbot_TAZ_4/profiles/2_normal.ini
+++ /dev/null
@@ -1,9 +0,0 @@
-[info]
-name = Normal print
-
-[profile]
-layer_height = 0.21
-print_speed = 100
-inset0_speed = 60
-insetx_speed = 80
-
diff --git a/resources/quickprint/lulzbot_TAZ_4/profiles/3_high.ini b/resources/quickprint/lulzbot_TAZ_4/profiles/3_high.ini
deleted file mode 100644
index 7f3ca163..00000000
--- a/resources/quickprint/lulzbot_TAZ_4/profiles/3_high.ini
+++ /dev/null
@@ -1,9 +0,0 @@
-[info]
-name = High quality
-
-[profile]
-layer_height = 0.14
-print_speed = 60
-inset0_speed = 40
-insetx_speed = 50
-
diff --git a/resources/quickprint/lulzbot_TAZ_5/ABS/High/profile.ini b/resources/quickprint/lulzbot_TAZ_5/ABS/High/profile.ini
new file mode 100644
index 00000000..de9538ef
--- /dev/null
+++ b/resources/quickprint/lulzbot_TAZ_5/ABS/High/profile.ini
@@ -0,0 +1,260 @@
+[info]
+name = High Quality
+order = 2
+
+[profile]
+layer_height = .16
+wall_thickness = 1.05
+retraction_enable = True
+solid_layer_thickness = .74
+fill_density = 20
+nozzle_size = .35
+print_speed = 50
+print_temperature = 0
+print_temperature2 = 0
+print_temperature3 = 0
+print_temperature4 = 0
+print_bed_temperature = 0
+support = None
+platform_adhesion = None
+support_dual_extrusion = Both
+wipe_tower = False
+wipe_tower_volume = 15
+ooze_shield = False
+filament_diameter = 2.85
+filament_diameter2 = 0
+filament_diameter3 = 0
+filament_diameter4 = 0
+filament_flow = 100.0
+retraction_speed = 10
+retraction_amount = 1
+retraction_dual_amount = 16.5
+retraction_min_travel = 0.5
+retraction_combing = True
+retraction_minimal_extrusion = 0.005
+retraction_hop = 0.1
+bottom_thickness = .3
+layer0_width_factor = 125
+object_sink = 0.0
+overlap_dual = 0.15
+travel_speed = 175
+bottom_layer_speed = 15
+infill_speed = 40
+inset0_speed = 30
+insetx_speed = 35
+cool_min_layer_time = 20
+fan_enabled = True
+skirt_line_count = 1
+skirt_gap = 3.0
+skirt_minimal_length = 250
+fan_full_height = 0.5
+fan_speed = 40
+fan_speed_max = 60
+cool_min_feedrate = 10
+cool_head_lift = False
+solid_top = True
+solid_bottom = True
+fill_overlap = 15
+support_type = Lines
+support_angle = 45
+support_fill_rate = 30
+support_xy_distance = 0.7
+support_z_distance = 0.05
+spiralize = False
+simple_mode = False
+brim_line_count = 10
+raft_margin = 5.0
+raft_line_spacing = 3.0
+raft_base_thickness = 0.3
+raft_base_linewidth = 1.0
+raft_interface_thickness = 0.27
+raft_interface_linewidth = 0.4
+raft_airgap = 0.22
+raft_surface_layers = 2
+fix_horrible_union_all_type_a = True
+fix_horrible_union_all_type_b = False
+fix_horrible_use_open_bits = False
+fix_horrible_extensive_stitching = False
+plugin_config = 
+object_center_x = -1
+object_center_y = -1
+
+[alterations]
+start.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M109 S{print_temperature} ;Uncomment to add your own temperature line
+	G21                     ;metric values
+	G90                     ;absolute positioning
+	M82                     ;set extruder to absolute mode
+	M107                    ;start with the fan off
+	G28 X0 Y0               ;move X/Y to min endstops
+	G28 Z0                  ;move Z to min endstops
+	G1 Z15.0 F{travel_speed};move the platform down 15mm
+	G92 E0                  ; zero the extruded length
+	G1 F200 E0              ; extrude 3mm of feed stock
+	G92 E0                  ; zero the extruded length again
+	G1 F{travel_speed}      ; set travel speed
+	M203 X192 Y208 Z3       ; speed limits
+	M117 Printing...        ; send message to LCD
+	
+end.gcode = M400                           ; wait for buffer to clear
+	M104 S0                        ; hotend off
+	M140 S0                        ; heated bed heater off (if you have it)
+	M107                           ; fans off
+	G91                            ; relative positioning
+	G1 E-1 F300                    ; retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F3000   ; move Z up a bit and retract filament even more
+	G90                            ; absolute positioning
+	G1 X0 Y250                     ; move to cooling position
+	M84                            ; steppers off
+	G90                            ; absolute positioning
+	M117 TAZ Ready.
+	;{profile_string}
+	
+start2.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end2.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+start3.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T2                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end3.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M104 T2 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+start4.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T3                      ;Switch to the 4th extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T2                      ;Switch to the 3th extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end4.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M104 T2 S0                     ;extruder heater off
+	M104 T3 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+support_start.gcode = 
+support_end.gcode = 
+cool_start.gcode = 
+cool_end.gcode = 
+replace.csv = 
+preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+	;This code is added before the T(n)
+postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+	;This code is added after the T(n)
+
diff --git a/resources/quickprint/lulzbot_TAZ_5/ABS/Low/profile.ini b/resources/quickprint/lulzbot_TAZ_5/ABS/Low/profile.ini
new file mode 100644
index 00000000..8cb8b287
--- /dev/null
+++ b/resources/quickprint/lulzbot_TAZ_5/ABS/Low/profile.ini
@@ -0,0 +1,260 @@
+[info]
+name = Fast Print
+order = 0
+
+[profile]
+layer_height = .28
+wall_thickness = 1.05
+retraction_enable = True
+solid_layer_thickness = .84
+fill_density = 20
+nozzle_size = .35
+print_speed = 50
+print_temperature = 0
+print_temperature2 = 0
+print_temperature3 = 0
+print_temperature4 = 0
+print_bed_temperature = 0
+support = None
+platform_adhesion = None
+support_dual_extrusion = Both
+wipe_tower = False
+wipe_tower_volume = 15
+ooze_shield = False
+filament_diameter = 2.85
+filament_diameter2 = 0
+filament_diameter3 = 0
+filament_diameter4 = 0
+filament_flow = 100.0
+retraction_speed = 10
+retraction_amount = 1
+retraction_dual_amount = 16.5
+retraction_min_travel = 0.5
+retraction_combing = True
+retraction_minimal_extrusion = 0.005
+retraction_hop = 0.1
+bottom_thickness = .3
+layer0_width_factor = 125
+object_sink = 0.0
+overlap_dual = 0.15
+travel_speed = 175
+bottom_layer_speed = 15
+infill_speed = 60
+inset0_speed = 50
+insetx_speed = 55
+cool_min_layer_time = 15
+fan_enabled = True
+skirt_line_count = 1
+skirt_gap = 3.0
+skirt_minimal_length = 250
+fan_full_height = 0.5
+fan_speed = 40
+fan_speed_max = 60
+cool_min_feedrate = 10
+cool_head_lift = False
+solid_top = True
+solid_bottom = True
+fill_overlap = 15
+support_type = Lines
+support_angle = 45
+support_fill_rate = 30
+support_xy_distance = 0.7
+support_z_distance = 0.05
+spiralize = False
+simple_mode = False
+brim_line_count = 10
+raft_margin = 5.0
+raft_line_spacing = 3.0
+raft_base_thickness = 0.3
+raft_base_linewidth = 1.0
+raft_interface_thickness = 0.27
+raft_interface_linewidth = 0.4
+raft_airgap = 0.22
+raft_surface_layers = 2
+fix_horrible_union_all_type_a = True
+fix_horrible_union_all_type_b = False
+fix_horrible_use_open_bits = False
+fix_horrible_extensive_stitching = False
+plugin_config = 
+object_center_x = -1
+object_center_y = -1
+
+[alterations]
+start.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M109 S{print_temperature} ;Uncomment to add your own temperature line
+	G21                     ;metric values
+	G90                     ;absolute positioning
+	M82                     ;set extruder to absolute mode
+	M107                    ;start with the fan off
+	G28 X0 Y0               ;move X/Y to min endstops
+	G28 Z0                  ;move Z to min endstops
+	G1 Z15.0 F{travel_speed};move the platform down 15mm
+	G92 E0                  ; zero the extruded length
+	G1 F200 E0              ; extrude 3mm of feed stock
+	G92 E0                  ; zero the extruded length again
+	G1 F{travel_speed}      ; set travel speed
+	M203 X192 Y208 Z3       ; speed limits
+	M117 Printing...        ; send message to LCD
+	
+end.gcode = M400                           ; wait for buffer to clear
+	M104 S0                        ; hotend off
+	M140 S0                        ; heated bed heater off (if you have it)
+	M107                           ; fans off
+	G91                            ; relative positioning
+	G1 E-1 F300                    ; retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F3000   ; move Z up a bit and retract filament even more
+	G90                            ; absolute positioning
+	G1 X0 Y250                     ; move to cooling position
+	M84                            ; steppers off
+	G90                            ; absolute positioning
+	M117 TAZ Ready.
+	;{profile_string}
+	
+start2.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end2.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+start3.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T2                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end3.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M104 T2 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+start4.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T3                      ;Switch to the 4th extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T2                      ;Switch to the 3th extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end4.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M104 T2 S0                     ;extruder heater off
+	M104 T3 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+support_start.gcode = 
+support_end.gcode = 
+cool_start.gcode = 
+cool_end.gcode = 
+replace.csv = 
+preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+	;This code is added before the T(n)
+postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+	;This code is added after the T(n)
+
diff --git a/resources/quickprint/lulzbot_TAZ_5/ABS/Normal/profile.ini b/resources/quickprint/lulzbot_TAZ_5/ABS/Normal/profile.ini
new file mode 100644
index 00000000..eb96c340
--- /dev/null
+++ b/resources/quickprint/lulzbot_TAZ_5/ABS/Normal/profile.ini
@@ -0,0 +1,261 @@
+[info]
+name = Normal Quality
+order = 1
+default = 1
+
+[profile]
+layer_height = .22
+wall_thickness = 1.05
+retraction_enable = True
+solid_layer_thickness = .88
+fill_density = 20
+nozzle_size = .35
+print_speed = 50
+print_temperature = 0
+print_temperature2 = 0
+print_temperature3 = 0
+print_temperature4 = 0
+print_bed_temperature = 0
+support = None
+platform_adhesion = None
+support_dual_extrusion = Both
+wipe_tower = False
+wipe_tower_volume = 15
+ooze_shield = False
+filament_diameter = 2.85
+filament_diameter2 = 0
+filament_diameter3 = 0
+filament_diameter4 = 0
+filament_flow = 100.0
+retraction_speed = 10
+retraction_amount = 1
+retraction_dual_amount = 16.5
+retraction_min_travel = 0.5
+retraction_combing = True
+retraction_minimal_extrusion = 0.005
+retraction_hop = 0.1
+bottom_thickness = .3
+layer0_width_factor = 125
+object_sink = 0.0
+overlap_dual = 0.15
+travel_speed = 175
+bottom_layer_speed = 15
+infill_speed = 55
+inset0_speed = 45
+insetx_speed = 50
+cool_min_layer_time = 15
+fan_enabled = True
+skirt_line_count = 1
+skirt_gap = 3.0
+skirt_minimal_length = 250
+fan_full_height = 0.5
+fan_speed = 40
+fan_speed_max = 60
+cool_min_feedrate = 10
+cool_head_lift = False
+solid_top = True
+solid_bottom = True
+fill_overlap = 15
+support_type = Lines
+support_angle = 45
+support_fill_rate = 30
+support_xy_distance = 0.7
+support_z_distance = 0.05
+spiralize = False
+simple_mode = False
+brim_line_count = 10
+raft_margin = 5.0
+raft_line_spacing = 3.0
+raft_base_thickness = 0.3
+raft_base_linewidth = 1.0
+raft_interface_thickness = 0.27
+raft_interface_linewidth = 0.4
+raft_airgap = 0.22
+raft_surface_layers = 2
+fix_horrible_union_all_type_a = True
+fix_horrible_union_all_type_b = False
+fix_horrible_use_open_bits = False
+fix_horrible_extensive_stitching = False
+plugin_config = 
+object_center_x = -1
+object_center_y = -1
+
+[alterations]
+start.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M109 S{print_temperature} ;Uncomment to add your own temperature line
+	G21                     ;metric values
+	G90                     ;absolute positioning
+	M82                     ;set extruder to absolute mode
+	M107                    ;start with the fan off
+	G28 X0 Y0               ;move X/Y to min endstops
+	G28 Z0                  ;move Z to min endstops
+	G1 Z15.0 F{travel_speed};move the platform down 15mm
+	G92 E0                  ; zero the extruded length
+	G1 F200 E0              ; extrude 3mm of feed stock
+	G92 E0                  ; zero the extruded length again
+	G1 F{travel_speed}      ; set travel speed
+	M203 X192 Y208 Z3       ; speed limits
+	M117 Printing...        ; send message to LCD
+	
+end.gcode = M400                           ; wait for buffer to clear
+	M104 S0                        ; hotend off
+	M140 S0                        ; heated bed heater off (if you have it)
+	M107                           ; fans off
+	G91                            ; relative positioning
+	G1 E-1 F300                    ; retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F3000   ; move Z up a bit and retract filament even more
+	G90                            ; absolute positioning
+	G1 X0 Y250                     ; move to cooling position
+	M84                            ; steppers off
+	G90                            ; absolute positioning
+	M117 TAZ Ready.
+	;{profile_string}
+	
+start2.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end2.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+start3.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T2                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end3.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M104 T2 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+start4.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T3                      ;Switch to the 4th extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T2                      ;Switch to the 3th extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end4.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M104 T2 S0                     ;extruder heater off
+	M104 T3 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+support_start.gcode = 
+support_end.gcode = 
+cool_start.gcode = 
+cool_end.gcode = 
+replace.csv = 
+preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+	;This code is added before the T(n)
+postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+	;This code is added after the T(n)
+
diff --git a/resources/quickprint/lulzbot_TAZ_5/ABS/Ulti/profile.ini b/resources/quickprint/lulzbot_TAZ_5/ABS/Ulti/profile.ini
new file mode 100644
index 00000000..e60192f1
--- /dev/null
+++ b/resources/quickprint/lulzbot_TAZ_5/ABS/Ulti/profile.ini
@@ -0,0 +1,3 @@
+[info]
+name = Ulti quality
+disabled = True
diff --git a/resources/quickprint/lulzbot_TAZ_4/materials/2_abs.ini b/resources/quickprint/lulzbot_TAZ_5/ABS/profile.ini
similarity index 65%
rename from resources/quickprint/lulzbot_TAZ_4/materials/2_abs.ini
rename to resources/quickprint/lulzbot_TAZ_5/ABS/profile.ini
index a5412b14..97adfc3e 100644
--- a/resources/quickprint/lulzbot_TAZ_4/materials/2_abs.ini
+++ b/resources/quickprint/lulzbot_TAZ_5/ABS/profile.ini
@@ -1,4 +1,4 @@
 [info]
 name = ABS
+order = 1
 
-[profile]
diff --git a/resources/quickprint/lulzbot_TAZ_5/HIPS/High/profile.ini b/resources/quickprint/lulzbot_TAZ_5/HIPS/High/profile.ini
new file mode 100644
index 00000000..35a4f97b
--- /dev/null
+++ b/resources/quickprint/lulzbot_TAZ_5/HIPS/High/profile.ini
@@ -0,0 +1,258 @@
+[info]
+name = High Quality
+order = 2
+
+[profile]
+layer_height = .14
+wall_thickness = 1.05
+retraction_enable = True
+solid_layer_thickness = .7
+fill_density = 20
+nozzle_size = .35
+print_speed = 50
+print_temperature = 0
+print_temperature2 = 0
+print_temperature3 = 0
+print_temperature4 = 0
+print_bed_temperature = 0
+support = None
+platform_adhesion = None
+support_dual_extrusion = Both
+wipe_tower = False
+wipe_tower_volume = 15
+ooze_shield = False
+filament_diameter = 2.85
+filament_diameter2 = 0
+filament_diameter3 = 0
+filament_diameter4 = 0
+filament_flow = 100.0
+retraction_speed = 10
+retraction_amount = 1
+retraction_dual_amount = 16.5
+retraction_min_travel = 0.5
+retraction_combing = True
+retraction_minimal_extrusion = 0.005
+retraction_hop = 0.1
+bottom_thickness = .3
+layer0_width_factor = 125
+object_sink = 0.0
+overlap_dual = 0.15
+travel_speed = 175
+bottom_layer_speed = 15
+infill_speed = 30
+inset0_speed = 20
+insetx_speed = 25
+cool_min_layer_time = 20
+fan_enabled = True
+skirt_line_count = 1
+skirt_gap = 3.0
+skirt_minimal_length = 250
+fan_full_height = 0.5
+fan_speed = 40
+fan_speed_max = 50
+cool_min_feedrate = 10
+cool_head_lift = False
+solid_top = True
+solid_bottom = True
+fill_overlap = 15
+support_type = Lines
+support_angle = 45
+support_fill_rate = 30
+support_xy_distance = 0.7
+support_z_distance = 0.05
+spiralize = False
+simple_mode = False
+brim_line_count = 10
+raft_margin = 5.0
+raft_line_spacing = 3.0
+raft_base_thickness = 0.3
+raft_base_linewidth = 1.0
+raft_interface_thickness = 0.27
+raft_interface_linewidth = 0.4
+raft_airgap = 0.35
+raft_surface_layers = 2
+fix_horrible_union_all_type_a = True
+fix_horrible_union_all_type_b = False
+fix_horrible_use_open_bits = False
+fix_horrible_extensive_stitching = False
+plugin_config = 
+object_center_x = -1
+object_center_y = -1
+
+[alterations]
+start.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M109 S{print_temperature} ;Uncomment to add your own temperature line
+	G21                     ;metric values
+	G90                     ;absolute positioning
+	M82                     ;set extruder to absolute mode
+	M107                    ;start with the fan off
+	G28 X0 Y0               ;move X/Y to min endstops
+	G28 Z0                  ;move Z to min endstops
+	G1 Z15.0 F{travel_speed};move the platform down 15mm
+	G92 E0                  ; zero the extruded length
+	G1 F200 E0              ; extrude 3mm of feed stock
+	G92 E0                  ; zero the extruded length again
+	G1 F{travel_speed}      ; set travel speed
+	M203 X192 Y208 Z3       ; speed limits
+	M117 Printing...        ; send message to LCD
+end.gcode = M400
+	M104 S0                        ; hotend off
+	M140 S0                        ; heated bed heater off (if you have it)
+	M107                           ; fans off
+	G91                            ; relative positioning
+	G1 E-1 F300                    ; retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F3000   ; move Z up a bit and retract filament even more
+	G90                            ; absolute positioning
+	G1 X0 Y250                     ; move to cooling position
+	M84                            ; steppers off
+	G90                            ; absolute positioning
+	M117 TAZ Ready.
+	;{profile_string}
+start2.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end2.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+start3.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T2                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end3.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M104 T2 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+start4.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T3                      ;Switch to the 4th extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T2                      ;Switch to the 3th extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end4.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M104 T2 S0                     ;extruder heater off
+	M104 T3 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+support_start.gcode = 
+support_end.gcode = 
+cool_start.gcode = 
+cool_end.gcode = 
+replace.csv = 
+preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+	;This code is added before the T(n)
+postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+	;This code is added after the T(n)
+
diff --git a/resources/quickprint/lulzbot_TAZ_5/HIPS/Low/profile.ini b/resources/quickprint/lulzbot_TAZ_5/HIPS/Low/profile.ini
new file mode 100644
index 00000000..96141e0e
--- /dev/null
+++ b/resources/quickprint/lulzbot_TAZ_5/HIPS/Low/profile.ini
@@ -0,0 +1,260 @@
+[info]
+name = Fast Print
+order = 0
+
+[profile]
+layer_height = .28
+wall_thickness = 1.05
+retraction_enable = True
+solid_layer_thickness = .84
+fill_density = 20
+nozzle_size = .35
+print_speed = 50
+print_temperature = 0
+print_temperature2 = 0
+print_temperature3 = 0
+print_temperature4 = 0
+print_bed_temperature = 0
+support = None
+platform_adhesion = None
+support_dual_extrusion = Both
+wipe_tower = False
+wipe_tower_volume = 15
+ooze_shield = False
+filament_diameter = 2.85
+filament_diameter2 = 0
+filament_diameter3 = 0
+filament_diameter4 = 0
+filament_flow = 100.0
+retraction_speed = 10
+retraction_amount = 1
+retraction_dual_amount = 16.5
+retraction_min_travel = 0.5
+retraction_combing = True
+retraction_minimal_extrusion = 0.005
+retraction_hop = 0.1
+bottom_thickness = .3
+layer0_width_factor = 125
+object_sink = 0.0
+overlap_dual = 0.15
+travel_speed = 175
+bottom_layer_speed = 15
+infill_speed = 70
+inset0_speed = 40
+insetx_speed = 45
+cool_min_layer_time = 20
+fan_enabled = True
+skirt_line_count = 1
+skirt_gap = 3.0
+skirt_minimal_length = 250
+fan_full_height = 0.5
+fan_speed = 40
+fan_speed_max = 50
+cool_min_feedrate = 10
+cool_head_lift = False
+solid_top = True
+solid_bottom = True
+fill_overlap = 15
+support_type = Lines
+support_angle = 45
+support_fill_rate = 30
+support_xy_distance = 0.7
+support_z_distance = 0.05
+spiralize = False
+simple_mode = False
+brim_line_count = 10
+raft_margin = 5.0
+raft_line_spacing = 3.0
+raft_base_thickness = 0.3
+raft_base_linewidth = 1.0
+raft_interface_thickness = 0.27
+raft_interface_linewidth = 0.4
+raft_airgap = 0.35
+raft_surface_layers = 2
+fix_horrible_union_all_type_a = True
+fix_horrible_union_all_type_b = False
+fix_horrible_use_open_bits = False
+fix_horrible_extensive_stitching = False
+plugin_config = 
+object_center_x = -1
+object_center_y = -1
+
+[alterations]
+start.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M109 S{print_temperature} ;Uncomment to add your own temperature line
+	G21                     ;metric values
+	G90                     ;absolute positioning
+	M82                     ;set extruder to absolute mode
+	M107                    ;start with the fan off
+	G28 X0 Y0               ;move X/Y to min endstops
+	G28 Z0                  ;move Z to min endstops
+	G1 Z15.0 F{travel_speed};move the platform down 15mm
+	G92 E0                  ; zero the extruded length
+	G1 F200 E0              ; extrude 3mm of feed stock
+	G92 E0                  ; zero the extruded length again
+	G1 F{travel_speed}      ; set travel speed
+	M203 X192 Y208 Z3       ; speed limits
+	M117 Printing...        ; send message to LCD
+	
+end.gcode = M400                           ; wait for buffer to clear
+	M104 S0                        ; hotend off
+	M140 S0                        ; heated bed heater off (if you have it)
+	M107                           ; fans off
+	G91                            ; relative positioning
+	G1 E-1 F300                    ; retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F3000   ; move Z up a bit and retract filament even more
+	G90                            ; absolute positioning
+	G1 X0 Y250                     ; move to cooling position
+	M84                            ; steppers off
+	G90                            ; absolute positioning
+	M117 TAZ Ready.
+	;{profile_string}
+	
+start2.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end2.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+start3.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T2                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end3.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M104 T2 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+start4.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T3                      ;Switch to the 4th extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T2                      ;Switch to the 3th extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end4.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M104 T2 S0                     ;extruder heater off
+	M104 T3 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+support_start.gcode = 
+support_end.gcode = 
+cool_start.gcode = 
+cool_end.gcode = 
+replace.csv = 
+preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+	;This code is added before the T(n)
+postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+	;This code is added after the T(n)
+
diff --git a/resources/quickprint/lulzbot_TAZ_5/HIPS/Normal/profile.ini b/resources/quickprint/lulzbot_TAZ_5/HIPS/Normal/profile.ini
new file mode 100644
index 00000000..0b42f04a
--- /dev/null
+++ b/resources/quickprint/lulzbot_TAZ_5/HIPS/Normal/profile.ini
@@ -0,0 +1,261 @@
+[info]
+name = Normal Quality
+order = 1
+default = 1
+
+[profile]
+layer_height = .22
+wall_thickness = 1.05
+retraction_enable = True
+solid_layer_thickness = .88
+fill_density = 20
+nozzle_size = .35
+print_speed = 50
+print_temperature = 0
+print_temperature2 = 0
+print_temperature3 = 0
+print_temperature4 = 0
+print_bed_temperature = 0
+support = None
+platform_adhesion = None
+support_dual_extrusion = Both
+wipe_tower = False
+wipe_tower_volume = 15
+ooze_shield = False
+filament_diameter = 2.85
+filament_diameter2 = 0
+filament_diameter3 = 0
+filament_diameter4 = 0
+filament_flow = 100.0
+retraction_speed = 10
+retraction_amount = 1
+retraction_dual_amount = 16.5
+retraction_min_travel = 0.5
+retraction_combing = True
+retraction_minimal_extrusion = 0.005
+retraction_hop = 0.1
+bottom_thickness = .3
+layer0_width_factor = 125
+object_sink = 0.0
+overlap_dual = 0.15
+travel_speed = 175
+bottom_layer_speed = 15
+infill_speed = 50
+inset0_speed = 30
+insetx_speed = 35
+cool_min_layer_time = 20
+fan_enabled = True
+skirt_line_count = 1
+skirt_gap = 3.0
+skirt_minimal_length = 250
+fan_full_height = 0.5
+fan_speed = 40
+fan_speed_max = 50
+cool_min_feedrate = 10
+cool_head_lift = False
+solid_top = True
+solid_bottom = True
+fill_overlap = 15
+support_type = Lines
+support_angle = 45
+support_fill_rate = 30
+support_xy_distance = 0.7
+support_z_distance = 0.05
+spiralize = False
+simple_mode = False
+brim_line_count = 10
+raft_margin = 5.0
+raft_line_spacing = 3.0
+raft_base_thickness = 0.3
+raft_base_linewidth = 1.0
+raft_interface_thickness = 0.27
+raft_interface_linewidth = 0.4
+raft_airgap = 0.35
+raft_surface_layers = 2
+fix_horrible_union_all_type_a = True
+fix_horrible_union_all_type_b = False
+fix_horrible_use_open_bits = False
+fix_horrible_extensive_stitching = False
+plugin_config = 
+object_center_x = -1
+object_center_y = -1
+
+[alterations]
+start.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M109 S{print_temperature} ;Uncomment to add your own temperature line
+	G21                     ;metric values
+	G90                     ;absolute positioning
+	M82                     ;set extruder to absolute mode
+	M107                    ;start with the fan off
+	G28 X0 Y0               ;move X/Y to min endstops
+	G28 Z0                  ;move Z to min endstops
+	G1 Z15.0 F{travel_speed};move the platform down 15mm
+	G92 E0                  ; zero the extruded length
+	G1 F200 E0              ; extrude 3mm of feed stock
+	G92 E0                  ; zero the extruded length again
+	G1 F{travel_speed}      ; set travel speed
+	M203 X192 Y208 Z3       ; speed limits
+	M117 Printing...        ; send message to LCD
+	
+end.gcode = M400                           ; wait for buffer to clear
+	M104 S0                        ; hotend off
+	M140 S0                        ; heated bed heater off (if you have it)
+	M107                           ; fans off
+	G91                            ; relative positioning
+	G1 E-1 F300                    ; retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F3000   ; move Z up a bit and retract filament even more
+	G90                            ; absolute positioning
+	G1 X0 Y250                     ; move to cooling position
+	M84                            ; steppers off
+	G90                            ; absolute positioning
+	M117 TAZ Ready.
+	;{profile_string}
+	
+start2.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end2.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+start3.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T2                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end3.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M104 T2 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+start4.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T3                      ;Switch to the 4th extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T2                      ;Switch to the 3th extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end4.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M104 T2 S0                     ;extruder heater off
+	M104 T3 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+support_start.gcode = 
+support_end.gcode = 
+cool_start.gcode = 
+cool_end.gcode = 
+replace.csv = 
+preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+	;This code is added before the T(n)
+postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+	;This code is added after the T(n)
+
diff --git a/resources/quickprint/lulzbot_TAZ_5_05nozzle/materials/1_hips.ini b/resources/quickprint/lulzbot_TAZ_5/HIPS/profile.ini
similarity index 66%
rename from resources/quickprint/lulzbot_TAZ_5_05nozzle/materials/1_hips.ini
rename to resources/quickprint/lulzbot_TAZ_5/HIPS/profile.ini
index 4efba8a6..e4090d25 100644
--- a/resources/quickprint/lulzbot_TAZ_5_05nozzle/materials/1_hips.ini
+++ b/resources/quickprint/lulzbot_TAZ_5/HIPS/profile.ini
@@ -1,3 +1,4 @@
 [info]
 name = HIPS
+order = 0
 
diff --git a/resources/quickprint/lulzbot_TAZ_5/PET/profile.ini b/resources/quickprint/lulzbot_TAZ_5/PET/profile.ini
new file mode 100644
index 00000000..84259445
--- /dev/null
+++ b/resources/quickprint/lulzbot_TAZ_5/PET/profile.ini
@@ -0,0 +1,2 @@
+[info]
+disabled = True
diff --git a/resources/quickprint/lulzbot_TAZ_5/PLA/High/profile.ini b/resources/quickprint/lulzbot_TAZ_5/PLA/High/profile.ini
new file mode 100644
index 00000000..1af0bfb5
--- /dev/null
+++ b/resources/quickprint/lulzbot_TAZ_5/PLA/High/profile.ini
@@ -0,0 +1,258 @@
+[info]
+name = High Quality
+order = 2
+
+[profile]
+layer_height = .14
+wall_thickness = 1.05
+retraction_enable = True
+solid_layer_thickness = .7
+fill_density = 20
+nozzle_size = .35
+print_speed = 50
+print_temperature = 0
+print_temperature2 = 0
+print_temperature3 = 0
+print_temperature4 = 0
+print_bed_temperature = 0
+support = None
+platform_adhesion = None
+support_dual_extrusion = Both
+wipe_tower = False
+wipe_tower_volume = 15
+ooze_shield = False
+filament_diameter = 2.85
+filament_diameter2 = 0
+filament_diameter3 = 0
+filament_diameter4 = 0
+filament_flow = 100.0
+retraction_speed = 10
+retraction_amount = 1.5
+retraction_dual_amount = 16.5
+retraction_min_travel = 0.5
+retraction_combing = True
+retraction_minimal_extrusion = 0.005
+retraction_hop = 0.1
+bottom_thickness = .3
+layer0_width_factor = 125
+object_sink = 0.0
+overlap_dual = 0.15
+travel_speed = 175
+bottom_layer_speed = 15
+infill_speed = 50
+inset0_speed = 40
+insetx_speed = 45
+cool_min_layer_time = 20
+fan_enabled = True
+skirt_line_count = 1
+skirt_gap = 3.0
+skirt_minimal_length = 250
+fan_full_height = 0.5
+fan_speed = 75
+fan_speed_max = 100
+cool_min_feedrate = 5
+cool_head_lift = False
+solid_top = True
+solid_bottom = True
+fill_overlap = 15
+support_type = Lines
+support_angle = 45
+support_fill_rate = 30
+support_xy_distance = 0.7
+support_z_distance = 0.05
+spiralize = False
+simple_mode = False
+brim_line_count = 10
+raft_margin = 5.0
+raft_line_spacing = 3.0
+raft_base_thickness = 0.3
+raft_base_linewidth = 1.0
+raft_interface_thickness = 0.27
+raft_interface_linewidth = 0.4
+raft_airgap = 0.35
+raft_surface_layers = 2
+fix_horrible_union_all_type_a = True
+fix_horrible_union_all_type_b = False
+fix_horrible_use_open_bits = False
+fix_horrible_extensive_stitching = False
+plugin_config = 
+object_center_x = -1
+object_center_y = -1
+
+[alterations]
+start.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M109 S{print_temperature} ;Uncomment to add your own temperature line
+	G21                     ;metric values
+	G90                     ;absolute positioning
+	M82                     ;set extruder to absolute mode
+	M107                    ;start with the fan off
+	G28 X0 Y0               ;move X/Y to min endstops
+	G28 Z0                  ;move Z to min endstops
+	G1 Z15.0 F{travel_speed};move the platform down 15mm
+	G92 E0                  ; zero the extruded length
+	G1 F200 E0              ; extrude 3mm of feed stock
+	G92 E0                  ; zero the extruded length again
+	G1 F{travel_speed}      ; set travel speed
+	M203 X192 Y208 Z3       ; speed limits
+	M117 Printing...        ; send message to LCD
+end.gcode = M400
+	M104 S0                        ; hotend off
+	M140 S0                        ; heated bed heater off (if you have it)
+	M107                           ; fans off
+	G91                            ; relative positioning
+	G1 E-1 F300                    ; retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F3000   ; move Z up a bit and retract filament even more
+	G90                            ; absolute positioning
+	G1 X0 Y250                     ; move to cooling position
+	M84                            ; steppers off
+	G90                            ; absolute positioning
+	M117 TAZ Ready.
+	;{profile_string}
+start2.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end2.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+start3.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T2                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end3.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M104 T2 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+start4.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T3                      ;Switch to the 4th extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T2                      ;Switch to the 3th extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end4.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M104 T2 S0                     ;extruder heater off
+	M104 T3 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+support_start.gcode = 
+support_end.gcode = 
+cool_start.gcode = 
+cool_end.gcode = 
+replace.csv = 
+preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+	;This code is added before the T(n)
+postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+	;This code is added after the T(n)
+
diff --git a/resources/quickprint/lulzbot_TAZ_5/PLA/Low/profile.ini b/resources/quickprint/lulzbot_TAZ_5/PLA/Low/profile.ini
new file mode 100644
index 00000000..d750173d
--- /dev/null
+++ b/resources/quickprint/lulzbot_TAZ_5/PLA/Low/profile.ini
@@ -0,0 +1,258 @@
+[info]
+name = Fast Print
+order = 0
+
+[profile]
+layer_height = .28
+wall_thickness = 1.05
+retraction_enable = True
+solid_layer_thickness = .84
+fill_density = 20
+nozzle_size = .35
+print_speed = 50
+print_temperature = 0
+print_temperature2 = 0
+print_temperature3 = 0
+print_temperature4 = 0
+print_bed_temperature = 0
+support = None
+platform_adhesion = None
+support_dual_extrusion = Both
+wipe_tower = False
+wipe_tower_volume = 15
+ooze_shield = False
+filament_diameter = 2.85
+filament_diameter2 = 0
+filament_diameter3 = 0
+filament_diameter4 = 0
+filament_flow = 100.0
+retraction_speed = 10
+retraction_amount = 1.5
+retraction_dual_amount = 16.5
+retraction_min_travel = 0.5
+retraction_combing = True
+retraction_minimal_extrusion = 0.005
+retraction_hop = 0.1
+bottom_thickness = .3
+layer0_width_factor = 125
+object_sink = 0.0
+overlap_dual = 0.15
+travel_speed = 175
+bottom_layer_speed = 15
+infill_speed = 80
+inset0_speed = 60
+insetx_speed = 70
+cool_min_layer_time = 15
+fan_enabled = True
+skirt_line_count = 1
+skirt_gap = 3.0
+skirt_minimal_length = 250
+fan_full_height = 0.5
+fan_speed = 75
+fan_speed_max = 100
+cool_min_feedrate = 15
+cool_head_lift = False
+solid_top = True
+solid_bottom = True
+fill_overlap = 15
+support_type = Lines
+support_angle = 45
+support_fill_rate = 30
+support_xy_distance = 0.7
+support_z_distance = 0.05
+spiralize = False
+simple_mode = False
+brim_line_count = 10
+raft_margin = 5.0
+raft_line_spacing = 3.0
+raft_base_thickness = 0.3
+raft_base_linewidth = 1.0
+raft_interface_thickness = 0.27
+raft_interface_linewidth = 0.4
+raft_airgap = 0.35
+raft_surface_layers = 2
+fix_horrible_union_all_type_a = True
+fix_horrible_union_all_type_b = False
+fix_horrible_use_open_bits = False
+fix_horrible_extensive_stitching = False
+plugin_config = 
+object_center_x = -1
+object_center_y = -1
+
+[alterations]
+start.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M109 S{print_temperature} ;Uncomment to add your own temperature line
+	G21                     ;metric values
+	G90                     ;absolute positioning
+	M82                     ;set extruder to absolute mode
+	M107                    ;start with the fan off
+	G28 X0 Y0               ;move X/Y to min endstops
+	G28 Z0                  ;move Z to min endstops
+	G1 Z15.0 F{travel_speed};move the platform down 15mm
+	G92 E0                  ; zero the extruded length
+	G1 F200 E0              ; extrude 3mm of feed stock
+	G92 E0                  ; zero the extruded length again
+	G1 F{travel_speed}      ; set travel speed
+	M203 X192 Y208 Z3       ; speed limits
+	M117 Printing...        ; send message to LCD
+end.gcode = M400
+	M104 S0                        ; hotend off
+	M140 S0                        ; heated bed heater off (if you have it)
+	M107                           ; fans off
+	G91                            ; relative positioning
+	G1 E-1 F300                    ; retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F3000   ; move Z up a bit and retract filament even more
+	G90                            ; absolute positioning
+	G1 X0 Y250                     ; move to cooling position
+	M84                            ; steppers off
+	G90                            ; absolute positioning
+	M117 TAZ Ready.
+	;{profile_string}
+start2.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end2.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+start3.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T2                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end3.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M104 T2 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+start4.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T3                      ;Switch to the 4th extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T2                      ;Switch to the 3th extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end4.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M104 T2 S0                     ;extruder heater off
+	M104 T3 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+support_start.gcode = 
+support_end.gcode = 
+cool_start.gcode = 
+cool_end.gcode = 
+replace.csv = 
+preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+	;This code is added before the T(n)
+postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+	;This code is added after the T(n)
+
diff --git a/resources/quickprint/lulzbot_TAZ_5/PLA/Normal/profile.ini b/resources/quickprint/lulzbot_TAZ_5/PLA/Normal/profile.ini
new file mode 100644
index 00000000..09a8d9f1
--- /dev/null
+++ b/resources/quickprint/lulzbot_TAZ_5/PLA/Normal/profile.ini
@@ -0,0 +1,259 @@
+[info]
+name = Normal Quality
+order = 1
+default = 1
+
+[profile]
+layer_height = .21
+wall_thickness = 1.05
+retraction_enable = True
+solid_layer_thickness = .84
+fill_density = 20
+nozzle_size = .35
+print_speed = 50
+print_temperature = 0
+print_temperature2 = 0
+print_temperature3 = 0
+print_temperature4 = 0
+print_bed_temperature = 0
+support = None
+platform_adhesion = None
+support_dual_extrusion = Both
+wipe_tower = False
+wipe_tower_volume = 15
+ooze_shield = False
+filament_diameter = 2.85
+filament_diameter2 = 0
+filament_diameter3 = 0
+filament_diameter4 = 0
+filament_flow = 100.0
+retraction_speed = 10
+retraction_amount = 1.5
+retraction_dual_amount = 16.5
+retraction_min_travel = 0.5
+retraction_combing = True
+retraction_minimal_extrusion = 0.005
+retraction_hop = 0.1
+bottom_thickness = .3
+layer0_width_factor = 125
+object_sink = 0.0
+overlap_dual = 0.15
+travel_speed = 175
+bottom_layer_speed = 15
+infill_speed = 60
+inset0_speed = 50
+insetx_speed = 55
+cool_min_layer_time = 15
+fan_enabled = True
+skirt_line_count = 1
+skirt_gap = 3.0
+skirt_minimal_length = 250
+fan_full_height = 0.5
+fan_speed = 75
+fan_speed_max = 100
+cool_min_feedrate = 10
+cool_head_lift = False
+solid_top = True
+solid_bottom = True
+fill_overlap = 15
+support_type = Lines
+support_angle = 45
+support_fill_rate = 30
+support_xy_distance = 0.7
+support_z_distance = 0.05
+spiralize = False
+simple_mode = False
+brim_line_count = 10
+raft_margin = 5.0
+raft_line_spacing = 3.0
+raft_base_thickness = 0.3
+raft_base_linewidth = 1.0
+raft_interface_thickness = 0.27
+raft_interface_linewidth = 0.4
+raft_airgap = 0.35
+raft_surface_layers = 2
+fix_horrible_union_all_type_a = True
+fix_horrible_union_all_type_b = False
+fix_horrible_use_open_bits = False
+fix_horrible_extensive_stitching = False
+plugin_config = 
+object_center_x = -1
+object_center_y = -1
+
+[alterations]
+start.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M109 S{print_temperature} ;Uncomment to add your own temperature line
+	G21                     ;metric values
+	G90                     ;absolute positioning
+	M82                     ;set extruder to absolute mode
+	M107                    ;start with the fan off
+	G28 X0 Y0               ;move X/Y to min endstops
+	G28 Z0                  ;move Z to min endstops
+	G1 Z15.0 F{travel_speed};move the platform down 15mm
+	G92 E0                  ; zero the extruded length
+	G1 F200 E0              ; extrude 3mm of feed stock
+	G92 E0                  ; zero the extruded length again
+	G1 F{travel_speed}      ; set travel speed
+	M203 X192 Y208 Z3       ; speed limits
+	M117 Printing...        ; send message to LCD
+end.gcode = M400
+	M104 S0                        ; hotend off
+	M140 S0                        ; heated bed heater off (if you have it)
+	M107                           ; fans off
+	G91                            ; relative positioning
+	G1 E-1 F300                    ; retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F3000   ; move Z up a bit and retract filament even more
+	G90                            ; absolute positioning
+	G1 X0 Y250                     ; move to cooling position
+	M84                            ; steppers off
+	G90                            ; absolute positioning
+	M117 TAZ Ready.
+	;{profile_string}
+start2.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end2.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+start3.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T2                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end3.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M104 T2 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+start4.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T3                      ;Switch to the 4th extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T2                      ;Switch to the 3th extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end4.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M104 T2 S0                     ;extruder heater off
+	M104 T3 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+support_start.gcode = 
+support_end.gcode = 
+cool_start.gcode = 
+cool_end.gcode = 
+replace.csv = 
+preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+	;This code is added before the T(n)
+postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+	;This code is added after the T(n)
+
diff --git a/resources/quickprint/lulzbot_TAZ_5/PLA/Ulti/profile.ini b/resources/quickprint/lulzbot_TAZ_5/PLA/Ulti/profile.ini
new file mode 100644
index 00000000..e60192f1
--- /dev/null
+++ b/resources/quickprint/lulzbot_TAZ_5/PLA/Ulti/profile.ini
@@ -0,0 +1,3 @@
+[info]
+name = Ulti quality
+disabled = True
diff --git a/resources/quickprint/materials/1_pla.ini b/resources/quickprint/lulzbot_TAZ_5/PLA/profile.ini
similarity index 65%
rename from resources/quickprint/materials/1_pla.ini
rename to resources/quickprint/lulzbot_TAZ_5/PLA/profile.ini
index 784aedab..a70247b8 100644
--- a/resources/quickprint/materials/1_pla.ini
+++ b/resources/quickprint/lulzbot_TAZ_5/PLA/profile.ini
@@ -1,4 +1,4 @@
 [info]
 name = PLA
+order = 2
 
-[profile]
diff --git a/resources/quickprint/lulzbot_TAZ_5/extra/taz5.ini b/resources/quickprint/lulzbot_TAZ_5/extra/taz5.ini
deleted file mode 100644
index 5bfa5621..00000000
--- a/resources/quickprint/lulzbot_TAZ_5/extra/taz5.ini
+++ /dev/null
@@ -1,43 +0,0 @@
-[profile]
-filament_diameter = 2.85
-nozzle_size = 0.35
-wall_thickness = 1.05
-layer0_width_factor = 125
-print_temperature = 0
-print_bed_temperature = 0
-bottom_layer_speed = 15
-travel_speed = 175
-retraction_speed = 10
-retraction_hop = 0.1
-skirt_minimal_length = 250
-fan_full_height = 0.5
-brim_line_count = 10
-retraction_minimal_extrusion = 0.005
-start.gcode = ;Sliced at: {day} {date} {time} for use with the LulzBot TAZ 5
-	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
-	G21                     ;metric values
-	G90                     ;absolute positioning
-	M82                     ;set extruder to absolute mode
-	M107                    ;start with the fan off
-	G28 X0 Y0               ;move X/Y to min endstops
-	G28 Z0                  ;move Z to min endstops
-	G1 Z15.0 F{travel_speed};move the platform down 15mm
-	G92 E0                  ; zero the extruded length
-	G1 F200 E0              ; extrude 3mm of feed stock
-	G92 E0                  ; zero the extruded length again
-	G1 F{travel_speed}      ; set travel speed
-	M203 X192 Y208 Z3       ; speed limits
-	M117 Printing...        ; send message to LCD
-end.gcode = M400                           ; wait for buffer to clear
-	M104 S0                        ; hotend off
-	M140 S0                        ; heated bed heater off (if you have it)
-	M107                           ; fans off
-	G91                            ; relative positioning
-	G1 E-1 F300                    ; retract the filament a bit before lifting the nozzle, to release some of the pressure
-	G1 Z+0.5 E-5 X-20 Y-20 F3000   ; move Z up a bit and retract filament even more
-	G90                            ; absolute positioning
-	G1 X0 Y250                     ; move to cooling position
-	M84                            ; steppers off
-	G90                            ; absolute positioning
-	M117 TAZ Ready.
-	;{profile_string}
diff --git a/resources/quickprint/lulzbot_TAZ_5/materials/1_hips.ini b/resources/quickprint/lulzbot_TAZ_5/materials/1_hips.ini
deleted file mode 100644
index 258460a9..00000000
--- a/resources/quickprint/lulzbot_TAZ_5/materials/1_hips.ini
+++ /dev/null
@@ -1,9 +0,0 @@
-[info]
-name = HIPS
-
-[profile]
-fan_speed = 40
-fan_speed_max = 50
-cool_min_layer_time = 20
-raft_airgap = 0.5
-retraction_amount = 1
diff --git a/resources/quickprint/lulzbot_TAZ_5/materials/2_abs.ini b/resources/quickprint/lulzbot_TAZ_5/materials/2_abs.ini
deleted file mode 100644
index 2b829e31..00000000
--- a/resources/quickprint/lulzbot_TAZ_5/materials/2_abs.ini
+++ /dev/null
@@ -1,8 +0,0 @@
-[info]
-name = ABS
-
-[profile]
-fan_speed = 40
-fan_speed_max = 60
-raft_airgap = 0.35
-retraction_amount = 1
diff --git a/resources/quickprint/lulzbot_TAZ_5/materials/3_pla.ini b/resources/quickprint/lulzbot_TAZ_5/materials/3_pla.ini
deleted file mode 100644
index 9b339535..00000000
--- a/resources/quickprint/lulzbot_TAZ_5/materials/3_pla.ini
+++ /dev/null
@@ -1,8 +0,0 @@
-[info]
-name = PLA
-
-[profile]
-raft_airgap = 0.5
-retraction_amount = 1.5
-fan_speed = 75
-fan_speed_max = 100
diff --git a/resources/quickprint/lulzbot_TAZ_5/options/1_support.ini b/resources/quickprint/lulzbot_TAZ_5/options/1_support.ini
deleted file mode 100644
index 807e5e12..00000000
--- a/resources/quickprint/lulzbot_TAZ_5/options/1_support.ini
+++ /dev/null
@@ -1,10 +0,0 @@
-[info]
-name = Print support structure
-
-[profile]
-support = Everywhere
-support_type = Lines
-support_angle = 45
-support_fill_rate = 30
-support_xy_distance = 0.7
-support_z_distance = 0.05
diff --git a/resources/quickprint/lulzbot_TAZ_5/options/2_brim.ini b/resources/quickprint/lulzbot_TAZ_5/options/2_brim.ini
deleted file mode 100644
index 8b641c4c..00000000
--- a/resources/quickprint/lulzbot_TAZ_5/options/2_brim.ini
+++ /dev/null
@@ -1,5 +0,0 @@
-[info]
-name = Print Brim
-
-[profile]
-platform_adhesion = Brim
diff --git a/resources/quickprint/lulzbot_TAZ_5/profiles/1_low.ini b/resources/quickprint/lulzbot_TAZ_5/profiles/1_low.ini
deleted file mode 100644
index 1a16c707..00000000
--- a/resources/quickprint/lulzbot_TAZ_5/profiles/1_low.ini
+++ /dev/null
@@ -1,6 +0,0 @@
-[info]
-name = Fast print
-
-[profile]
-layer_height = 0.28
-solid_layer_thickness = 0.84
diff --git a/resources/quickprint/lulzbot_TAZ_5/profiles/2_normal.ini b/resources/quickprint/lulzbot_TAZ_5/profiles/2_normal.ini
deleted file mode 100644
index 94ff47ed..00000000
--- a/resources/quickprint/lulzbot_TAZ_5/profiles/2_normal.ini
+++ /dev/null
@@ -1,11 +0,0 @@
-[info]
-name = Normal print
-
-[profile]
-# ABS and HIPS : 
-#layer_height = 0.22
-#solid_layer_thickness = 0.88
-# PLA : 
-#layer_height = 0.21
-#solid_layer_thickness = 0.84
-
diff --git a/resources/quickprint/lulzbot_TAZ_5/profiles/3_high.ini b/resources/quickprint/lulzbot_TAZ_5/profiles/3_high.ini
deleted file mode 100644
index fd9e200e..00000000
--- a/resources/quickprint/lulzbot_TAZ_5/profiles/3_high.ini
+++ /dev/null
@@ -1,11 +0,0 @@
-[info]
-name = High quality
-
-[profile]
-# HIPS and PLA :
-#layer_height = 0.14
-#solid_layer_thickness = 0.7
-# ABS :
-#layer_height = 0.16
-#solid_layer_thickness = 0.74
-
diff --git a/resources/quickprint/lulzbot_TAZ_5_05nozzle/extra/abs_high.ini b/resources/quickprint/lulzbot_TAZ_5_05nozzle/ABS/High/profile.ini
similarity index 99%
rename from resources/quickprint/lulzbot_TAZ_5_05nozzle/extra/abs_high.ini
rename to resources/quickprint/lulzbot_TAZ_5_05nozzle/ABS/High/profile.ini
index f5aea85f..12bd8baa 100644
--- a/resources/quickprint/lulzbot_TAZ_5_05nozzle/extra/abs_high.ini
+++ b/resources/quickprint/lulzbot_TAZ_5_05nozzle/ABS/High/profile.ini
@@ -1,3 +1,7 @@
+[info]
+name = High Quality
+order = 2
+
 [profile]
 layer_height = 0.18
 wall_thickness = 1.0
diff --git a/resources/quickprint/lulzbot_TAZ_5_05nozzle/extra/abs_low.ini b/resources/quickprint/lulzbot_TAZ_5_05nozzle/ABS/Low/profile.ini
similarity index 99%
rename from resources/quickprint/lulzbot_TAZ_5_05nozzle/extra/abs_low.ini
rename to resources/quickprint/lulzbot_TAZ_5_05nozzle/ABS/Low/profile.ini
index 3f3a3d91..397a6b51 100644
--- a/resources/quickprint/lulzbot_TAZ_5_05nozzle/extra/abs_low.ini
+++ b/resources/quickprint/lulzbot_TAZ_5_05nozzle/ABS/Low/profile.ini
@@ -1,3 +1,7 @@
+[info]
+name = Fast Print
+order = 0
+
 [profile]
 layer_height = 0.38
 wall_thickness = 1.0
diff --git a/resources/quickprint/lulzbot_TAZ_5_05nozzle/extra/abs_normal.ini b/resources/quickprint/lulzbot_TAZ_5_05nozzle/ABS/Normal/profile.ini
similarity index 99%
rename from resources/quickprint/lulzbot_TAZ_5_05nozzle/extra/abs_normal.ini
rename to resources/quickprint/lulzbot_TAZ_5_05nozzle/ABS/Normal/profile.ini
index e8d1fbbb..b00b0272 100644
--- a/resources/quickprint/lulzbot_TAZ_5_05nozzle/extra/abs_normal.ini
+++ b/resources/quickprint/lulzbot_TAZ_5_05nozzle/ABS/Normal/profile.ini
@@ -1,3 +1,8 @@
+[info]
+name = Normal Quality
+order = 1
+default = 1
+
 [profile]
 layer_height = 0.25
 wall_thickness = 1.0
diff --git a/resources/quickprint/lulzbot_TAZ_5_05nozzle/ABS/profile.ini b/resources/quickprint/lulzbot_TAZ_5_05nozzle/ABS/profile.ini
new file mode 100644
index 00000000..97adfc3e
--- /dev/null
+++ b/resources/quickprint/lulzbot_TAZ_5_05nozzle/ABS/profile.ini
@@ -0,0 +1,4 @@
+[info]
+name = ABS
+order = 1
+
diff --git a/resources/quickprint/lulzbot_TAZ_5_05nozzle/extra/hips_high.ini b/resources/quickprint/lulzbot_TAZ_5_05nozzle/HIPS/High/profile.ini
similarity index 99%
rename from resources/quickprint/lulzbot_TAZ_5_05nozzle/extra/hips_high.ini
rename to resources/quickprint/lulzbot_TAZ_5_05nozzle/HIPS/High/profile.ini
index 40591d48..0e9b7a49 100644
--- a/resources/quickprint/lulzbot_TAZ_5_05nozzle/extra/hips_high.ini
+++ b/resources/quickprint/lulzbot_TAZ_5_05nozzle/HIPS/High/profile.ini
@@ -1,3 +1,7 @@
+[info]
+name = High Quality
+order = 2
+
 [profile]
 layer_height = 0.18
 wall_thickness = 1.0
diff --git a/resources/quickprint/lulzbot_TAZ_5_05nozzle/extra/hips_low.ini b/resources/quickprint/lulzbot_TAZ_5_05nozzle/HIPS/Low/profile.ini
similarity index 99%
rename from resources/quickprint/lulzbot_TAZ_5_05nozzle/extra/hips_low.ini
rename to resources/quickprint/lulzbot_TAZ_5_05nozzle/HIPS/Low/profile.ini
index cf8c61d1..93bf6288 100644
--- a/resources/quickprint/lulzbot_TAZ_5_05nozzle/extra/hips_low.ini
+++ b/resources/quickprint/lulzbot_TAZ_5_05nozzle/HIPS/Low/profile.ini
@@ -1,3 +1,7 @@
+[info]
+name = Fast Print
+order = 0
+
 [profile]
 layer_height = 0.38
 wall_thickness = 1.0
diff --git a/resources/quickprint/lulzbot_TAZ_5_05nozzle/extra/hips_normal.ini b/resources/quickprint/lulzbot_TAZ_5_05nozzle/HIPS/Normal/profile.ini
similarity index 99%
rename from resources/quickprint/lulzbot_TAZ_5_05nozzle/extra/hips_normal.ini
rename to resources/quickprint/lulzbot_TAZ_5_05nozzle/HIPS/Normal/profile.ini
index 4a84a121..cc8a6805 100644
--- a/resources/quickprint/lulzbot_TAZ_5_05nozzle/extra/hips_normal.ini
+++ b/resources/quickprint/lulzbot_TAZ_5_05nozzle/HIPS/Normal/profile.ini
@@ -1,3 +1,8 @@
+[info]
+name = Normal Quality
+order = 1
+default = 1
+
 [profile]
 layer_height = 0.25
 wall_thickness = 1.0
diff --git a/resources/quickprint/lulzbot_TAZ_5_05nozzle/HIPS/profile.ini b/resources/quickprint/lulzbot_TAZ_5_05nozzle/HIPS/profile.ini
new file mode 100644
index 00000000..e4090d25
--- /dev/null
+++ b/resources/quickprint/lulzbot_TAZ_5_05nozzle/HIPS/profile.ini
@@ -0,0 +1,4 @@
+[info]
+name = HIPS
+order = 0
+
diff --git a/resources/quickprint/lulzbot_TAZ_5_05nozzle/PET/profile.ini b/resources/quickprint/lulzbot_TAZ_5_05nozzle/PET/profile.ini
new file mode 100644
index 00000000..84259445
--- /dev/null
+++ b/resources/quickprint/lulzbot_TAZ_5_05nozzle/PET/profile.ini
@@ -0,0 +1,2 @@
+[info]
+disabled = True
diff --git a/resources/quickprint/lulzbot_TAZ_5_05nozzle/extra/pla_high.ini b/resources/quickprint/lulzbot_TAZ_5_05nozzle/PLA/High/profile.ini
similarity index 99%
rename from resources/quickprint/lulzbot_TAZ_5_05nozzle/extra/pla_high.ini
rename to resources/quickprint/lulzbot_TAZ_5_05nozzle/PLA/High/profile.ini
index ef69b6da..df0206a6 100644
--- a/resources/quickprint/lulzbot_TAZ_5_05nozzle/extra/pla_high.ini
+++ b/resources/quickprint/lulzbot_TAZ_5_05nozzle/PLA/High/profile.ini
@@ -1,3 +1,7 @@
+[info]
+name = High Quality
+order = 2
+
 [profile]
 layer_height = 0.14
 wall_thickness = 1
diff --git a/resources/quickprint/lulzbot_TAZ_5_05nozzle/extra/pla_low.ini b/resources/quickprint/lulzbot_TAZ_5_05nozzle/PLA/Low/profile.ini
similarity index 99%
rename from resources/quickprint/lulzbot_TAZ_5_05nozzle/extra/pla_low.ini
rename to resources/quickprint/lulzbot_TAZ_5_05nozzle/PLA/Low/profile.ini
index 53218c26..e44629e2 100644
--- a/resources/quickprint/lulzbot_TAZ_5_05nozzle/extra/pla_low.ini
+++ b/resources/quickprint/lulzbot_TAZ_5_05nozzle/PLA/Low/profile.ini
@@ -1,3 +1,7 @@
+[info]
+name = Fast Print
+order = 0
+
 [profile]
 layer_height = 0.38
 wall_thickness = 1
diff --git a/resources/quickprint/lulzbot_TAZ_5_05nozzle/extra/pla_normal.ini b/resources/quickprint/lulzbot_TAZ_5_05nozzle/PLA/Normal/profile.ini
similarity index 99%
rename from resources/quickprint/lulzbot_TAZ_5_05nozzle/extra/pla_normal.ini
rename to resources/quickprint/lulzbot_TAZ_5_05nozzle/PLA/Normal/profile.ini
index ea541c3a..6127df79 100644
--- a/resources/quickprint/lulzbot_TAZ_5_05nozzle/extra/pla_normal.ini
+++ b/resources/quickprint/lulzbot_TAZ_5_05nozzle/PLA/Normal/profile.ini
@@ -1,3 +1,8 @@
+[info]
+name = Normal Quality
+order = 1
+default = 1
+
 [profile]
 layer_height = 0.25
 wall_thickness = 1
diff --git a/resources/quickprint/lulzbot_TAZ_5_05nozzle/PLA/profile.ini b/resources/quickprint/lulzbot_TAZ_5_05nozzle/PLA/profile.ini
new file mode 100644
index 00000000..a70247b8
--- /dev/null
+++ b/resources/quickprint/lulzbot_TAZ_5_05nozzle/PLA/profile.ini
@@ -0,0 +1,4 @@
+[info]
+name = PLA
+order = 2
+
diff --git a/resources/quickprint/lulzbot_TAZ_5_05nozzle/options/1_support.ini b/resources/quickprint/lulzbot_TAZ_5_05nozzle/options/1_support.ini
deleted file mode 100644
index 807e5e12..00000000
--- a/resources/quickprint/lulzbot_TAZ_5_05nozzle/options/1_support.ini
+++ /dev/null
@@ -1,10 +0,0 @@
-[info]
-name = Print support structure
-
-[profile]
-support = Everywhere
-support_type = Lines
-support_angle = 45
-support_fill_rate = 30
-support_xy_distance = 0.7
-support_z_distance = 0.05
diff --git a/resources/quickprint/lulzbot_TAZ_5_05nozzle/options/2_brim.ini b/resources/quickprint/lulzbot_TAZ_5_05nozzle/options/2_brim.ini
deleted file mode 100644
index 8b641c4c..00000000
--- a/resources/quickprint/lulzbot_TAZ_5_05nozzle/options/2_brim.ini
+++ /dev/null
@@ -1,5 +0,0 @@
-[info]
-name = Print Brim
-
-[profile]
-platform_adhesion = Brim
diff --git a/resources/quickprint/lulzbot_TAZ_5_05nozzle/profiles/1_low.ini b/resources/quickprint/lulzbot_TAZ_5_05nozzle/profiles/1_low.ini
deleted file mode 100644
index 4c62867d..00000000
--- a/resources/quickprint/lulzbot_TAZ_5_05nozzle/profiles/1_low.ini
+++ /dev/null
@@ -1,3 +0,0 @@
-[info]
-name = Fast print
-
diff --git a/resources/quickprint/lulzbot_TAZ_5_05nozzle/profiles/2_normal.ini b/resources/quickprint/lulzbot_TAZ_5_05nozzle/profiles/2_normal.ini
deleted file mode 100644
index a199f03d..00000000
--- a/resources/quickprint/lulzbot_TAZ_5_05nozzle/profiles/2_normal.ini
+++ /dev/null
@@ -1,4 +0,0 @@
-[info]
-name = Normal print
-
-
diff --git a/resources/quickprint/lulzbot_TAZ_5_05nozzle/profiles/3_high.ini b/resources/quickprint/lulzbot_TAZ_5_05nozzle/profiles/3_high.ini
deleted file mode 100644
index f4ed49a0..00000000
--- a/resources/quickprint/lulzbot_TAZ_5_05nozzle/profiles/3_high.ini
+++ /dev/null
@@ -1,3 +0,0 @@
-[info]
-name = High quality
-
diff --git a/resources/quickprint/lulzbot_mini/ABS/High/profile.ini b/resources/quickprint/lulzbot_mini/ABS/High/profile.ini
new file mode 100644
index 00000000..73c37cc7
--- /dev/null
+++ b/resources/quickprint/lulzbot_mini/ABS/High/profile.ini
@@ -0,0 +1,296 @@
+[info]
+name = High Quality
+order = 2
+
+[profile]
+layer_height = 0.18
+wall_thickness = 1.0
+retraction_enable = True
+solid_layer_thickness = 0.8
+fill_density = 20
+nozzle_size = 0.5
+print_speed = 50
+print_temperature = 240
+print_temperature2 = 0
+print_temperature3 = 0
+print_temperature4 = 0
+print_bed_temperature = 110
+support = None
+platform_adhesion = None
+support_dual_extrusion = Both
+wipe_tower = False
+wipe_tower_volume = 15
+ooze_shield = False
+filament_diameter = 2.85
+filament_diameter2 = 0
+filament_diameter3 = 0
+filament_diameter4 = 0
+filament_flow = 100.0
+retraction_speed = 10
+retraction_amount = 1
+retraction_dual_amount = 16.5
+retraction_min_travel = 1.5
+retraction_combing = True
+retraction_minimal_extrusion = 0.005
+retraction_hop = 0.1
+bottom_thickness = 0.425
+layer0_width_factor = 125
+object_sink = 0.0
+overlap_dual = 0.15
+travel_speed = 175
+bottom_layer_speed = 15
+infill_speed = 40
+inset0_speed = 30
+insetx_speed = 35
+cool_min_layer_time = 20
+fan_enabled = True
+skirt_line_count = 1
+skirt_gap = 3.0
+skirt_minimal_length = 250
+fan_full_height = 0.5
+fan_speed = 40
+fan_speed_max = 60
+cool_min_feedrate = 10
+cool_head_lift = False
+solid_top = True
+solid_bottom = True
+fill_overlap = 15
+support_type = Lines
+support_angle = 45
+support_fill_rate = 30
+support_xy_distance = 0.7
+support_z_distance = 0.05
+spiralize = False
+simple_mode = False
+brim_line_count = 10
+raft_margin = 5.0
+raft_line_spacing = 3.0
+raft_base_thickness = 0.3
+raft_base_linewidth = 1.0
+raft_interface_thickness = 0.27
+raft_interface_linewidth = 0.4
+raft_airgap = 0.5
+raft_surface_layers = 2
+fix_horrible_union_all_type_a = True
+fix_horrible_union_all_type_b = False
+fix_horrible_use_open_bits = False
+fix_horrible_extensive_stitching = False
+plugin_config = (lp1
+	.
+object_center_x = -1
+object_center_y = -1
+
+[alterations]
+start.gcode = ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M109 S{print_temperature} ;Uncomment to add your own temperature line
+	G21                          ; metric values
+	G90                          ; absolute positioning
+	M82                          ; set extruder to absolute mode
+	M107                         ; start with the fan off
+	G92 E0                       ; set extruder position to 0
+	M140 S{print_bed_temperature}; get bed heating up
+	G28                          ; home all
+	M109 S150                    ; set to cleaning temp and wait
+	G1 Z150 E-30 F75             ; suck up XXmm of filament
+	M109 S170                    ; heat up rest of way
+	G1 X45 Y174 F11520           ; move behind scraper
+	G1 Z0  F1200                 ; CRITICAL: set Z to height of top of scraper
+	G1 X45 Y174 Z-.5 F4000       ; wiping ; plunge into wipe pad
+	G1 X55 Y172 Z-.5 F4000       ; wiping
+	G1 X45 Y174 Z0 F4000         ; wiping
+	G1 X55 Y172 F4000            ; wiping
+	G1 X45 Y174 F4000            ; wiping
+	G1 X55 Y172 F4000            ; wiping
+	G1 X45 Y174 F4000            ; wiping
+	G1 X55 Y172 F4000            ; wiping
+	G1 X60 Y174 F4000            ; wiping
+	G1 X80 Y172 F4000            ; wiping
+	G1 X60 Y174 F4000            ; wiping
+	G1 X80 Y172 F4000            ; wiping
+	G1 X60 Y174 F4000            ; wiping
+	G1 X90 Y172 F4000            ; wiping
+	G1 X80 Y174 F4000            ; wiping
+	G1 X100 Y172 F4000           ; wiping
+	G1 X80 Y174 F4000            ; wiping
+	G1 X100 Y172 F4000           ; wiping
+	G1 X80 Y174 F4000            ; wiping
+	G1 X100 Y172 F4000           ; wiping
+	G1 X110 Y174 F4000           ; wiping
+	G1 X100 Y172 F4000           ; wiping
+	G1 X110 Y174 F4000           ; wiping
+	G1 X100 Y172 F4000           ; wiping
+	G1 X110 Y174 F4000           ; wiping
+	G1 X115 Y172 Z-0.5 F1000     ; wipe slower and bury noz in cleanish area
+	G1 Z10                       ; raise z
+	G28 X0 Y0                    ; home x and y
+	M109 S170                    ; set to probing temp
+	M204 S300                    ; set accel for probing
+	G29                          ; Probe
+	M204 S2000                   ; set accel back to normal
+	G1 X5 Y15 Z10 F5000          ; get out the way
+	M400                         ; clear buffer
+	G4 S1                        ; pause
+	M109 S{print_temperature}    ; set extruder temp and wait
+	G4 S25                       ; wait for bed to temp up
+	G1 Z2 E0 F75                 ; extrude filament back into nozzle
+	M140 S{print_bed_temperature}; get bed temping up during first layer
+end.gcode = M400
+	M104 S0                         ; Hotend off
+	M140 S0                         ; heated bed heater off (if you have it)
+	M107                            ; fans off
+	G92 E0                          ; set extruder to 0
+	G1 E-3 F300                     ; retract a bit to relieve pressure
+	G1 X5 Y5 Z156 F10000            ; move to cooling positioning
+	M190 R60                        ; wait for bed to cool
+	M140 S0                         ; turn off bed temp
+	G1 X145 Y175 Z156 F1000         ; move to cooling positioning
+	M84                             ; steppers off
+	G90                             ; absolute positioning
+	;{profile_string}
+start2.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end2.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+start3.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T2                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end3.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M104 T2 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+start4.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T3                      ;Switch to the 4th extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T2                      ;Switch to the 3th extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end4.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M104 T2 S0                     ;extruder heater off
+	M104 T3 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+support_start.gcode = 
+support_end.gcode = 
+cool_start.gcode = 
+cool_end.gcode = 
+replace.csv = 
+preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+	;This code is added before the T(n)
+postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+	;This code is added after the T(n)
+
diff --git a/resources/quickprint/lulzbot_mini/ABS/Low/profile.ini b/resources/quickprint/lulzbot_mini/ABS/Low/profile.ini
new file mode 100644
index 00000000..c611361a
--- /dev/null
+++ b/resources/quickprint/lulzbot_mini/ABS/Low/profile.ini
@@ -0,0 +1,296 @@
+[info]
+name = Fast Print
+order = 0
+
+[profile]
+layer_height = 0.38
+wall_thickness = 1.0
+retraction_enable = True
+solid_layer_thickness = 0.8
+fill_density = 20
+nozzle_size = 0.5
+print_speed = 50
+print_temperature = 240
+print_temperature2 = 0
+print_temperature3 = 0
+print_temperature4 = 0
+print_bed_temperature = 110
+support = None
+platform_adhesion = None
+support_dual_extrusion = Both
+wipe_tower = False
+wipe_tower_volume = 15
+ooze_shield = False
+filament_diameter = 2.85
+filament_diameter2 = 0
+filament_diameter3 = 0
+filament_diameter4 = 0
+filament_flow = 100.0
+retraction_speed = 10
+retraction_amount = 1
+retraction_dual_amount = 16.5
+retraction_min_travel = 1.5
+retraction_combing = True
+retraction_minimal_extrusion = 0.005
+retraction_hop = 0.1
+bottom_thickness = 0.425
+layer0_width_factor = 125
+object_sink = 0.0
+overlap_dual = 0.15
+travel_speed = 175
+bottom_layer_speed = 15
+infill_speed = 60
+inset0_speed = 50
+insetx_speed = 55
+cool_min_layer_time = 15
+fan_enabled = True
+skirt_line_count = 1
+skirt_gap = 3.0
+skirt_minimal_length = 250
+fan_full_height = 0.5
+fan_speed = 40
+fan_speed_max = 60
+cool_min_feedrate = 10
+cool_head_lift = False
+solid_top = True
+solid_bottom = True
+fill_overlap = 15
+support_type = Lines
+support_angle = 45
+support_fill_rate = 30
+support_xy_distance = 0.7
+support_z_distance = 0.05
+spiralize = False
+simple_mode = False
+brim_line_count = 10
+raft_margin = 5.0
+raft_line_spacing = 3.0
+raft_base_thickness = 0.3
+raft_base_linewidth = 1.0
+raft_interface_thickness = 0.27
+raft_interface_linewidth = 0.4
+raft_airgap = 0.5
+raft_surface_layers = 2
+fix_horrible_union_all_type_a = True
+fix_horrible_union_all_type_b = False
+fix_horrible_use_open_bits = False
+fix_horrible_extensive_stitching = False
+plugin_config = (lp1
+	.
+object_center_x = -1
+object_center_y = -1
+
+[alterations]
+start.gcode = ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M109 S{print_temperature} ;Uncomment to add your own temperature line
+	G21                          ; metric values
+	G90                          ; absolute positioning
+	M82                          ; set extruder to absolute mode
+	M107                         ; start with the fan off
+	G92 E0                       ; set extruder position to 0
+	M140 S{print_bed_temperature}; get bed heating up
+	G28                          ; home all
+	M109 S150                    ; set to cleaning temp and wait
+	G1 Z150 E-30 F75             ; suck up XXmm of filament
+	M109 S170                    ; heat up rest of way
+	G1 X45 Y174 F11520           ; move behind scraper
+	G1 Z0  F1200                 ; CRITICAL: set Z to height of top of scraper
+	G1 X45 Y174 Z-.5 F4000       ; wiping ; plunge into wipe pad
+	G1 X55 Y172 Z-.5 F4000       ; wiping
+	G1 X45 Y174 Z0 F4000         ; wiping
+	G1 X55 Y172 F4000            ; wiping
+	G1 X45 Y174 F4000            ; wiping
+	G1 X55 Y172 F4000            ; wiping
+	G1 X45 Y174 F4000            ; wiping
+	G1 X55 Y172 F4000            ; wiping
+	G1 X60 Y174 F4000            ; wiping
+	G1 X80 Y172 F4000            ; wiping
+	G1 X60 Y174 F4000            ; wiping
+	G1 X80 Y172 F4000            ; wiping
+	G1 X60 Y174 F4000            ; wiping
+	G1 X90 Y172 F4000            ; wiping
+	G1 X80 Y174 F4000            ; wiping
+	G1 X100 Y172 F4000           ; wiping
+	G1 X80 Y174 F4000            ; wiping
+	G1 X100 Y172 F4000           ; wiping
+	G1 X80 Y174 F4000            ; wiping
+	G1 X100 Y172 F4000           ; wiping
+	G1 X110 Y174 F4000           ; wiping
+	G1 X100 Y172 F4000           ; wiping
+	G1 X110 Y174 F4000           ; wiping
+	G1 X100 Y172 F4000           ; wiping
+	G1 X110 Y174 F4000           ; wiping
+	G1 X115 Y172 Z-0.5 F1000     ; wipe slower and bury noz in cleanish area
+	G1 Z10                       ; raise z
+	G28 X0 Y0                    ; home x and y
+	M109 S170                    ; set to probing temp
+	M204 S300                    ; set accel for probing
+	G29                          ; Probe
+	M204 S2000                   ; set accel back to normal
+	G1 X5 Y15 Z10 F5000          ; get out the way
+	M400                         ; clear buffer
+	G4 S1                        ; pause
+	M109 S{print_temperature}    ; set extruder temp and wait
+	G4 S25                       ; wait for bed to temp up
+	G1 Z2 E0 F75                 ; extrude filament back into nozzle
+	M140 S{print_bed_temperature}; get bed temping up during first layer
+end.gcode = M400
+	M104 S0                         ; Hotend off
+	M140 S0                         ; heated bed heater off (if you have it)
+	M107                            ; fans off
+	G92 E0                          ; set extruder to 0
+	G1 E-3 F300                     ; retract a bit to relieve pressure
+	G1 X5 Y5 Z156 F10000            ; move to cooling positioning
+	M190 R60                        ; wait for bed to cool
+	M140 S0                         ; turn off bed temp
+	G1 X145 Y175 Z156 F1000         ; move to cooling positioning
+	M84                             ; steppers off
+	G90                             ; absolute positioning
+	;{profile_string}
+start2.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end2.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+start3.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T2                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end3.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M104 T2 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+start4.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T3                      ;Switch to the 4th extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T2                      ;Switch to the 3th extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end4.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M104 T2 S0                     ;extruder heater off
+	M104 T3 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+support_start.gcode = 
+support_end.gcode = 
+cool_start.gcode = 
+cool_end.gcode = 
+replace.csv = 
+preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+	;This code is added before the T(n)
+postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+	;This code is added after the T(n)
+
diff --git a/resources/quickprint/lulzbot_mini/ABS/Normal/profile.ini b/resources/quickprint/lulzbot_mini/ABS/Normal/profile.ini
new file mode 100644
index 00000000..2d59adb2
--- /dev/null
+++ b/resources/quickprint/lulzbot_mini/ABS/Normal/profile.ini
@@ -0,0 +1,297 @@
+[info]
+name = Normal Quality
+order = 1
+default = 1
+
+[profile]
+layer_height = 0.25
+wall_thickness = 1.0
+retraction_enable = True
+solid_layer_thickness = 0.8
+fill_density = 20
+nozzle_size = 0.5
+print_speed = 50
+print_temperature = 240
+print_temperature2 = 0
+print_temperature3 = 0
+print_temperature4 = 0
+print_bed_temperature = 110
+support = None
+platform_adhesion = None
+support_dual_extrusion = Both
+wipe_tower = False
+wipe_tower_volume = 15
+ooze_shield = False
+filament_diameter = 2.85
+filament_diameter2 = 0
+filament_diameter3 = 0
+filament_diameter4 = 0
+filament_flow = 100.0
+retraction_speed = 10
+retraction_amount = 1
+retraction_dual_amount = 16.5
+retraction_min_travel = 1.5
+retraction_combing = True
+retraction_minimal_extrusion = 0.005
+retraction_hop = 0.1
+bottom_thickness = 0.425
+layer0_width_factor = 125
+object_sink = 0.0
+overlap_dual = 0.15
+travel_speed = 175
+bottom_layer_speed = 15
+infill_speed = 55
+inset0_speed = 45
+insetx_speed = 50
+cool_min_layer_time = 15
+fan_enabled = True
+skirt_line_count = 1
+skirt_gap = 3.0
+skirt_minimal_length = 250
+fan_full_height = 0.5
+fan_speed = 40
+fan_speed_max = 60
+cool_min_feedrate = 10
+cool_head_lift = False
+solid_top = True
+solid_bottom = True
+fill_overlap = 15
+support_type = Lines
+support_angle = 45
+support_fill_rate = 30
+support_xy_distance = 0.7
+support_z_distance = 0.05
+spiralize = False
+simple_mode = False
+brim_line_count = 10
+raft_margin = 5.0
+raft_line_spacing = 3.0
+raft_base_thickness = 0.3
+raft_base_linewidth = 1.0
+raft_interface_thickness = 0.27
+raft_interface_linewidth = 0.4
+raft_airgap = 0.5
+raft_surface_layers = 2
+fix_horrible_union_all_type_a = True
+fix_horrible_union_all_type_b = False
+fix_horrible_use_open_bits = False
+fix_horrible_extensive_stitching = False
+plugin_config = (lp1
+	.
+object_center_x = -1
+object_center_y = -1
+
+[alterations]
+start.gcode = ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M109 S{print_temperature} ;Uncomment to add your own temperature line
+	G21                          ; metric values
+	G90                          ; absolute positioning
+	M82                          ; set extruder to absolute mode
+	M107                         ; start with the fan off
+	G92 E0                       ; set extruder position to 0
+	M140 S{print_bed_temperature}; get bed heating up
+	G28                          ; home all
+	M109 S150                    ; set to cleaning temp and wait
+	G1 Z150 E-30 F75             ; suck up XXmm of filament
+	M109 S170                    ; heat up rest of way
+	G1 X45 Y174 F11520           ; move behind scraper
+	G1 Z0  F1200                 ; CRITICAL: set Z to height of top of scraper
+	G1 X45 Y174 Z-.5 F4000       ; wiping ; plunge into wipe pad
+	G1 X55 Y172 Z-.5 F4000       ; wiping
+	G1 X45 Y174 Z0 F4000         ; wiping
+	G1 X55 Y172 F4000            ; wiping
+	G1 X45 Y174 F4000            ; wiping
+	G1 X55 Y172 F4000            ; wiping
+	G1 X45 Y174 F4000            ; wiping
+	G1 X55 Y172 F4000            ; wiping
+	G1 X60 Y174 F4000            ; wiping
+	G1 X80 Y172 F4000            ; wiping
+	G1 X60 Y174 F4000            ; wiping
+	G1 X80 Y172 F4000            ; wiping
+	G1 X60 Y174 F4000            ; wiping
+	G1 X90 Y172 F4000            ; wiping
+	G1 X80 Y174 F4000            ; wiping
+	G1 X100 Y172 F4000           ; wiping
+	G1 X80 Y174 F4000            ; wiping
+	G1 X100 Y172 F4000           ; wiping
+	G1 X80 Y174 F4000            ; wiping
+	G1 X100 Y172 F4000           ; wiping
+	G1 X110 Y174 F4000           ; wiping
+	G1 X100 Y172 F4000           ; wiping
+	G1 X110 Y174 F4000           ; wiping
+	G1 X100 Y172 F4000           ; wiping
+	G1 X110 Y174 F4000           ; wiping
+	G1 X115 Y172 Z-0.5 F1000     ; wipe slower and bury noz in cleanish area
+	G1 Z10                       ; raise z
+	G28 X0 Y0                    ; home x and y
+	M109 S170                    ; set to probing temp
+	M204 S300                    ; set accel for probing
+	G29                          ; Probe
+	M204 S2000                   ; set accel back to normal
+	G1 X5 Y15 Z10 F5000          ; get out the way
+	M400                         ; clear buffer
+	G4 S1                        ; pause
+	M109 S{print_temperature}    ; set extruder temp and wait
+	G4 S25                       ; wait for bed to temp up
+	G1 Z2 E0 F75                 ; extrude filament back into nozzle
+	M140 S{print_bed_temperature}; get bed temping up during first layer
+end.gcode = M400
+	M104 S0                         ; Hotend off
+	M140 S0                         ; heated bed heater off (if you have it)
+	M107                            ; fans off
+	G92 E0                          ; set extruder to 0
+	G1 E-3 F300                     ; retract a bit to relieve pressure
+	G1 X5 Y5 Z156 F10000            ; move to cooling positioning
+	M190 R60                        ; wait for bed to cool
+	M140 S0                         ; turn off bed temp
+	G1 X145 Y175 Z156 F1000         ; move to cooling positioning
+	M84                             ; steppers off
+	G90                             ; absolute positioning
+	;{profile_string}
+start2.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end2.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+start3.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T2                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end3.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M104 T2 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+start4.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T3                      ;Switch to the 4th extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T2                      ;Switch to the 3th extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end4.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M104 T2 S0                     ;extruder heater off
+	M104 T3 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+support_start.gcode = 
+support_end.gcode = 
+cool_start.gcode = 
+cool_end.gcode = 
+replace.csv = 
+preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+	;This code is added before the T(n)
+postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+	;This code is added after the T(n)
+
diff --git a/resources/quickprint/lulzbot_mini/ABS/Ulti/profile.ini b/resources/quickprint/lulzbot_mini/ABS/Ulti/profile.ini
new file mode 100644
index 00000000..e60192f1
--- /dev/null
+++ b/resources/quickprint/lulzbot_mini/ABS/Ulti/profile.ini
@@ -0,0 +1,3 @@
+[info]
+name = Ulti quality
+disabled = True
diff --git a/resources/quickprint/lulzbot_mini/ABS/profile.ini b/resources/quickprint/lulzbot_mini/ABS/profile.ini
new file mode 100644
index 00000000..97adfc3e
--- /dev/null
+++ b/resources/quickprint/lulzbot_mini/ABS/profile.ini
@@ -0,0 +1,4 @@
+[info]
+name = ABS
+order = 1
+
diff --git a/resources/quickprint/lulzbot_mini/HIPS/High/profile.ini b/resources/quickprint/lulzbot_mini/HIPS/High/profile.ini
new file mode 100644
index 00000000..3bf7052e
--- /dev/null
+++ b/resources/quickprint/lulzbot_mini/HIPS/High/profile.ini
@@ -0,0 +1,295 @@
+[info]
+name = High Quality
+order = 2
+
+[profile]
+layer_height = 0.18
+wall_thickness = 1.0
+retraction_enable = True
+solid_layer_thickness = 0.8
+fill_density = 20
+nozzle_size = 0.5
+print_speed = 50
+print_temperature = 240
+print_temperature2 = 0
+print_temperature3 = 0
+print_temperature4 = 0
+print_bed_temperature = 110
+support = None
+platform_adhesion = None
+support_dual_extrusion = Both
+wipe_tower = False
+wipe_tower_volume = 15
+ooze_shield = False
+filament_diameter = 2.85
+filament_diameter2 = 0
+filament_diameter3 = 0
+filament_diameter4 = 0
+filament_flow = 100.0
+retraction_speed = 10
+retraction_amount = 1
+retraction_dual_amount = 16.5
+retraction_min_travel = 1.5
+retraction_combing = True
+retraction_minimal_extrusion = 0.005
+retraction_hop = 0.1
+bottom_thickness = 0.425
+layer0_width_factor = 125
+object_sink = 0.0
+overlap_dual = 0.15
+travel_speed = 175
+bottom_layer_speed = 15
+infill_speed = 30
+inset0_speed = 20
+insetx_speed = 25
+cool_min_layer_time = 20
+fan_enabled = True
+skirt_line_count = 1
+skirt_gap = 3.0
+skirt_minimal_length = 250
+fan_full_height = 0.5
+fan_speed = 40
+fan_speed_max = 50
+cool_min_feedrate = 10
+cool_head_lift = False
+solid_top = True
+solid_bottom = True
+fill_overlap = 15
+support_type = Lines
+support_angle = 45
+support_fill_rate = 30
+support_xy_distance = 0.7
+support_z_distance = 0.05
+spiralize = False
+simple_mode = False
+brim_line_count = 10
+raft_margin = 5.0
+raft_line_spacing = 3.0
+raft_base_thickness = 0.3
+raft_base_linewidth = 1.0
+raft_interface_thickness = 0.27
+raft_interface_linewidth = 0.4
+raft_airgap = 0.5
+raft_surface_layers = 2
+fix_horrible_union_all_type_a = True
+fix_horrible_union_all_type_b = False
+fix_horrible_use_open_bits = False
+fix_horrible_extensive_stitching = False
+plugin_config = (lp1
+	.
+object_center_x = -1
+object_center_y = -1
+
+[alterations]
+start.gcode = ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M109 S{print_temperature} ;Uncomment to add your own temperature line
+	G21                          ; metric values
+	G90                          ; absolute positioning
+	M82                          ; set extruder to absolute mode
+	M107                         ; start with the fan off
+	G92 E0                       ; set extruder position to 0
+	M140 S110                    ; get bed heating up
+	G28                          ; home all
+	M109 S150                    ; set to cleaning temp and wait
+	G1 Z150 E-30 F75             ; suck up XXmm of filament
+	M109 S170                    ; heat up rest of way
+	G1 X45 Y174 F11520           ; move behind scraper
+	G1 Z0  F1200                 ; CRITICAL: set Z to height of top of scraper
+	G1 X45 Y174 Z-.5 F4000       ; wiping ; plunge into wipe pad
+	G1 X55 Y172 Z-.5 F4000       ; wiping
+	G1 X45 Y174 Z0 F4000         ; wiping
+	G1 X55 Y172 F4000            ; wiping
+	G1 X45 Y174 F4000            ; wiping
+	G1 X55 Y172 F4000            ; wiping
+	G1 X45 Y174 F4000            ; wiping
+	G1 X55 Y172 F4000            ; wiping
+	G1 X60 Y174 F4000            ; wiping
+	G1 X80 Y172 F4000            ; wiping
+	G1 X60 Y174 F4000            ; wiping
+	G1 X80 Y172 F4000            ; wiping
+	G1 X60 Y174 F4000            ; wiping
+	G1 X90 Y172 F4000            ; wiping
+	G1 X80 Y174 F4000            ; wiping
+	G1 X100 Y172 F4000           ; wiping
+	G1 X80 Y174 F4000            ; wiping
+	G1 X100 Y172 F4000           ; wiping
+	G1 X80 Y174 F4000            ; wiping
+	G1 X100 Y172 F4000           ; wiping
+	G1 X110 Y174 F4000           ; wiping
+	G1 X100 Y172 F4000           ; wiping
+	G1 X110 Y174 F4000           ; wiping
+	G1 X100 Y172 F4000           ; wiping
+	G1 X110 Y174 F4000           ; wiping
+	G1 X115 Y172 Z-0.5 F1000     ; wipe slower and bury noz in cleanish area
+	G1 Z10                       ; raise z
+	G28 X0 Y0                    ; home x and y
+	M109 S170                    ; set to probing temp
+	M204 S300                    ; set accel for probing
+	G29                          ; Probe
+	M204 S2000                   ; set accel back to normal
+	G1 X5 Y15 Z10 F5000          ; get out the way
+	M400                         ; clear buffer
+	G4 S1                        ; pause
+	M109 S{print_temperature}    ; set extruder temp and wait
+	G4 S25                       ; wait for bed to temp up
+	G1 Z2 E0 F75                 ; extrude filament back into nozzle
+	M140 S{print_bed_temperature}; get bed temping up during first layer
+end.gcode = M400
+	M104 S0                    ; hotend off
+	M140 S0                    ; heated bed heater off (if you have it)
+	M107					    ; fans off
+	G92 E0	                  ; set extruder to 0
+	G1 E-3 F300			    ; retract a bit to relieve pressure
+	G1 X5 Y5 Z156 F10000       ; move to cooling positioning
+	M190 R60				    ; wait for bed to cool
+	M140 S0                    ; turn off bed
+	G1 X145 Y175 Z156 F1000    ; move to cooling positioning
+	M84				         ; steppers off
+	G90                        ; absolute positioning
+	;{profile_string}
+start2.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end2.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+start3.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T2                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end3.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M104 T2 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+start4.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T3                      ;Switch to the 4th extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T2                      ;Switch to the 3th extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end4.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M104 T2 S0                     ;extruder heater off
+	M104 T3 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+support_start.gcode = 
+support_end.gcode = 
+cool_start.gcode = 
+cool_end.gcode = 
+replace.csv = 
+preswitchextruder.gcode = ;Switch between the current extruder and the next ex
+postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+	;This code is added after the T(n)
+
diff --git a/resources/quickprint/lulzbot_mini/HIPS/Low/profile.ini b/resources/quickprint/lulzbot_mini/HIPS/Low/profile.ini
new file mode 100644
index 00000000..fc8f9e28
--- /dev/null
+++ b/resources/quickprint/lulzbot_mini/HIPS/Low/profile.ini
@@ -0,0 +1,295 @@
+[info]
+name = Fast Print
+order = 0
+
+[profile]
+layer_height = 0.38
+wall_thickness = 1.0
+retraction_enable = True
+solid_layer_thickness = 0.8
+fill_density = 20
+nozzle_size = 0.5
+print_speed = 50
+print_temperature = 240
+print_temperature2 = 0
+print_temperature3 = 0
+print_temperature4 = 0
+print_bed_temperature = 110
+support = None
+platform_adhesion = None
+support_dual_extrusion = Both
+wipe_tower = False
+wipe_tower_volume = 15
+ooze_shield = False
+filament_diameter = 2.85
+filament_diameter2 = 0
+filament_diameter3 = 0
+filament_diameter4 = 0
+filament_flow = 100.0
+retraction_speed = 10
+retraction_amount = 1
+retraction_dual_amount = 16.5
+retraction_min_travel = 1.5
+retraction_combing = True
+retraction_minimal_extrusion = 0.005
+retraction_hop = 0.1
+bottom_thickness = 0.425
+layer0_width_factor = 125
+object_sink = 0.0
+overlap_dual = 0.15
+travel_speed = 175
+bottom_layer_speed = 15
+infill_speed = 70
+inset0_speed = 40
+insetx_speed = 45
+cool_min_layer_time = 15
+fan_enabled = True
+skirt_line_count = 1
+skirt_gap = 3.0
+skirt_minimal_length = 250
+fan_full_height = 0.5
+fan_speed = 40
+fan_speed_max = 50
+cool_min_feedrate = 10
+cool_head_lift = False
+solid_top = True
+solid_bottom = True
+fill_overlap = 15
+support_type = Lines
+support_angle = 45
+support_fill_rate = 30
+support_xy_distance = 0.7
+support_z_distance = 0.05
+spiralize = False
+simple_mode = False
+brim_line_count = 10
+raft_margin = 5.0
+raft_line_spacing = 3.0
+raft_base_thickness = 0.3
+raft_base_linewidth = 1.0
+raft_interface_thickness = 0.27
+raft_interface_linewidth = 0.4
+raft_airgap = 0.5
+raft_surface_layers = 2
+fix_horrible_union_all_type_a = True
+fix_horrible_union_all_type_b = False
+fix_horrible_use_open_bits = False
+fix_horrible_extensive_stitching = False
+plugin_config = (lp1
+	.
+object_center_x = -1
+object_center_y = -1
+
+[alterations]
+start.gcode = ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M109 S{print_temperature} ;Uncomment to add your own temperature line
+	G21                          ; metric values
+	G90                          ; absolute positioning
+	M82                          ; set extruder to absolute mode
+	M107                         ; start with the fan off
+	G92 E0                       ; set extruder position to 0
+	M140 S110                    ; get bed heating up
+	G28                          ; home all
+	M109 S150                    ; set to cleaning temp and wait
+	G1 Z150 E-30 F75             ; suck up XXmm of filament
+	M109 S170                    ; heat up rest of way
+	G1 X45 Y174 F11520           ; move behind scraper
+	G1 Z0  F1200                 ; CRITICAL: set Z to height of top of scraper
+	G1 X45 Y174 Z-.5 F4000       ; wiping ; plunge into wipe pad
+	G1 X55 Y172 Z-.5 F4000       ; wiping
+	G1 X45 Y174 Z0 F4000         ; wiping
+	G1 X55 Y172 F4000            ; wiping
+	G1 X45 Y174 F4000            ; wiping
+	G1 X55 Y172 F4000            ; wiping
+	G1 X45 Y174 F4000            ; wiping
+	G1 X55 Y172 F4000            ; wiping
+	G1 X60 Y174 F4000            ; wiping
+	G1 X80 Y172 F4000            ; wiping
+	G1 X60 Y174 F4000            ; wiping
+	G1 X80 Y172 F4000            ; wiping
+	G1 X60 Y174 F4000            ; wiping
+	G1 X90 Y172 F4000            ; wiping
+	G1 X80 Y174 F4000            ; wiping
+	G1 X100 Y172 F4000           ; wiping
+	G1 X80 Y174 F4000            ; wiping
+	G1 X100 Y172 F4000           ; wiping
+	G1 X80 Y174 F4000            ; wiping
+	G1 X100 Y172 F4000           ; wiping
+	G1 X110 Y174 F4000           ; wiping
+	G1 X100 Y172 F4000           ; wiping
+	G1 X110 Y174 F4000           ; wiping
+	G1 X100 Y172 F4000           ; wiping
+	G1 X110 Y174 F4000           ; wiping
+	G1 X115 Y172 Z-0.5 F1000     ; wipe slower and bury noz in cleanish area
+	G1 Z10                       ; raise z
+	G28 X0 Y0                    ; home x and y
+	M109 S170                    ; set to probing temp
+	M204 S300                    ; set accel for probing
+	G29                          ; Probe
+	M204 S2000                   ; set accel back to normal
+	G1 X5 Y15 Z10 F5000          ; get out the way
+	M400                         ; clear buffer
+	G4 S1                        ; pause
+	M109 S{print_temperature}    ; set extruder temp and wait
+	G4 S25                       ; wait for bed to temp up
+	G1 Z2 E0 F75                 ; extrude filament back into nozzle
+	M140 S{print_bed_temperature}; get bed temping up during first layer
+end.gcode = M400
+	M104 S0                    ; hotend off
+	M140 S0                    ; heated bed heater off (if you have it)
+	M107					    ; fans off
+	G92 E0	                  ; set extruder to 0
+	G1 E-3 F300			    ; retract a bit to relieve pressure
+	G1 X5 Y5 Z156 F10000       ; move to cooling positioning
+	M190 R60				    ; wait for bed to cool
+	M140 S0                    ; turn off bed
+	G1 X145 Y175 Z156 F1000    ; move to cooling positioning
+	M84				         ; steppers off
+	G90                        ; absolute positioning
+	;{profile_string}
+start2.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end2.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+start3.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T2                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end3.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M104 T2 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+start4.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T3                      ;Switch to the 4th extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T2                      ;Switch to the 3th extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end4.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M104 T2 S0                     ;extruder heater off
+	M104 T3 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+support_start.gcode = 
+support_end.gcode = 
+cool_start.gcode = 
+cool_end.gcode = 
+replace.csv = 
+preswitchextruder.gcode = ;Switch between the current extruder and the next ex
+postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+	;This code is added after the T(n)
+
diff --git a/resources/quickprint/lulzbot_mini/HIPS/Normal/profile.ini b/resources/quickprint/lulzbot_mini/HIPS/Normal/profile.ini
new file mode 100644
index 00000000..4f89b1f4
--- /dev/null
+++ b/resources/quickprint/lulzbot_mini/HIPS/Normal/profile.ini
@@ -0,0 +1,296 @@
+[info]
+name = Normal Quality
+order = 1
+default = 1
+
+[profile]
+layer_height = 0.25
+wall_thickness = 1.0
+retraction_enable = True
+solid_layer_thickness = 0.8
+fill_density = 20
+nozzle_size = 0.5
+print_speed = 50
+print_temperature = 240
+print_temperature2 = 0
+print_temperature3 = 0
+print_temperature4 = 0
+print_bed_temperature = 110
+support = None
+platform_adhesion = None
+support_dual_extrusion = Both
+wipe_tower = False
+wipe_tower_volume = 15
+ooze_shield = False
+filament_diameter = 2.85
+filament_diameter2 = 0
+filament_diameter3 = 0
+filament_diameter4 = 0
+filament_flow = 100.0
+retraction_speed = 10
+retraction_amount = 1
+retraction_dual_amount = 16.5
+retraction_min_travel = 1.5
+retraction_combing = True
+retraction_minimal_extrusion = 0.005
+retraction_hop = 0.1
+bottom_thickness = 0.425
+layer0_width_factor = 125
+object_sink = 0.0
+overlap_dual = 0.15
+travel_speed = 175
+bottom_layer_speed = 15
+infill_speed = 50
+inset0_speed = 30
+insetx_speed = 35
+cool_min_layer_time = 20
+fan_enabled = True
+skirt_line_count = 1
+skirt_gap = 3.0
+skirt_minimal_length = 250
+fan_full_height = 0.5
+fan_speed = 40
+fan_speed_max = 50
+cool_min_feedrate = 10
+cool_head_lift = False
+solid_top = True
+solid_bottom = True
+fill_overlap = 15
+support_type = Lines
+support_angle = 45
+support_fill_rate = 30
+support_xy_distance = 0.7
+support_z_distance = 0.05
+spiralize = False
+simple_mode = False
+brim_line_count = 10
+raft_margin = 5.0
+raft_line_spacing = 3.0
+raft_base_thickness = 0.3
+raft_base_linewidth = 1.0
+raft_interface_thickness = 0.27
+raft_interface_linewidth = 0.4
+raft_airgap = 0.5
+raft_surface_layers = 2
+fix_horrible_union_all_type_a = True
+fix_horrible_union_all_type_b = False
+fix_horrible_use_open_bits = False
+fix_horrible_extensive_stitching = False
+plugin_config = (lp1
+	.
+object_center_x = -1
+object_center_y = -1
+
+[alterations]
+start.gcode = ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M109 S{print_temperature} ;Uncomment to add your own temperature line
+	G21                          ; metric values
+	G90                          ; absolute positioning
+	M82                          ; set extruder to absolute mode
+	M107                         ; start with the fan off
+	G92 E0                       ; set extruder position to 0
+	M140 S110                    ; get bed heating up
+	G28                          ; home all
+	M109 S150                    ; set to cleaning temp and wait
+	G1 Z150 E-30 F75             ; suck up XXmm of filament
+	M109 S170                    ; heat up rest of way
+	G1 X45 Y174 F11520           ; move behind scraper
+	G1 Z0  F1200                 ; CRITICAL: set Z to height of top of scraper
+	G1 X45 Y174 Z-.5 F4000       ; wiping ; plunge into wipe pad
+	G1 X55 Y172 Z-.5 F4000       ; wiping
+	G1 X45 Y174 Z0 F4000         ; wiping
+	G1 X55 Y172 F4000            ; wiping
+	G1 X45 Y174 F4000            ; wiping
+	G1 X55 Y172 F4000            ; wiping
+	G1 X45 Y174 F4000            ; wiping
+	G1 X55 Y172 F4000            ; wiping
+	G1 X60 Y174 F4000            ; wiping
+	G1 X80 Y172 F4000            ; wiping
+	G1 X60 Y174 F4000            ; wiping
+	G1 X80 Y172 F4000            ; wiping
+	G1 X60 Y174 F4000            ; wiping
+	G1 X90 Y172 F4000            ; wiping
+	G1 X80 Y174 F4000            ; wiping
+	G1 X100 Y172 F4000           ; wiping
+	G1 X80 Y174 F4000            ; wiping
+	G1 X100 Y172 F4000           ; wiping
+	G1 X80 Y174 F4000            ; wiping
+	G1 X100 Y172 F4000           ; wiping
+	G1 X110 Y174 F4000           ; wiping
+	G1 X100 Y172 F4000           ; wiping
+	G1 X110 Y174 F4000           ; wiping
+	G1 X100 Y172 F4000           ; wiping
+	G1 X110 Y174 F4000           ; wiping
+	G1 X115 Y172 Z-0.5 F1000     ; wipe slower and bury noz in cleanish area
+	G1 Z10                       ; raise z
+	G28 X0 Y0                    ; home x and y
+	M109 S170                    ; set to probing temp
+	M204 S300                    ; set accel for probing
+	G29                          ; Probe
+	M204 S2000                   ; set accel back to normal
+	G1 X5 Y15 Z10 F5000          ; get out the way
+	M400                         ; clear buffer
+	G4 S1                        ; pause
+	M109 S{print_temperature}    ; set extruder temp and wait
+	G4 S25                       ; wait for bed to temp up
+	G1 Z2 E0 F75                 ; extrude filament back into nozzle
+	M140 S{print_bed_temperature}; get bed temping up during first layer
+end.gcode = M400
+	M104 S0                    ; hotend off
+	M140 S0                    ; heated bed heater off (if you have it)
+	M107					    ; fans off
+	G92 E0	                  ; set extruder to 0
+	G1 E-3 F300			    ; retract a bit to relieve pressure
+	G1 X5 Y5 Z156 F10000       ; move to cooling positioning
+	M190 R60				    ; wait for bed to cool
+	M140 S0                    ; turn off bed
+	G1 X145 Y175 Z156 F1000    ; move to cooling positioning
+	M84				         ; steppers off
+	G90                        ; absolute positioning
+	;{profile_string}
+start2.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end2.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+start3.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T2                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end3.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M104 T2 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+start4.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T3                      ;Switch to the 4th extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T2                      ;Switch to the 3th extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end4.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M104 T2 S0                     ;extruder heater off
+	M104 T3 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+support_start.gcode = 
+support_end.gcode = 
+cool_start.gcode = 
+cool_end.gcode = 
+replace.csv = 
+preswitchextruder.gcode = ;Switch between the current extruder and the next ex
+postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+	;This code is added after the T(n)
+
diff --git a/resources/quickprint/lulzbot_mini/HIPS/profile.ini b/resources/quickprint/lulzbot_mini/HIPS/profile.ini
new file mode 100644
index 00000000..e4090d25
--- /dev/null
+++ b/resources/quickprint/lulzbot_mini/HIPS/profile.ini
@@ -0,0 +1,4 @@
+[info]
+name = HIPS
+order = 0
+
diff --git a/resources/quickprint/lulzbot_mini/PET/profile.ini b/resources/quickprint/lulzbot_mini/PET/profile.ini
new file mode 100644
index 00000000..84259445
--- /dev/null
+++ b/resources/quickprint/lulzbot_mini/PET/profile.ini
@@ -0,0 +1,2 @@
+[info]
+disabled = True
diff --git a/resources/quickprint/lulzbot_mini/PLA/High/profile.ini b/resources/quickprint/lulzbot_mini/PLA/High/profile.ini
new file mode 100644
index 00000000..df717cbe
--- /dev/null
+++ b/resources/quickprint/lulzbot_mini/PLA/High/profile.ini
@@ -0,0 +1,293 @@
+[info]
+name = High Quality
+order = 2
+
+[profile]
+layer_height = 0.14
+wall_thickness = 1
+retraction_enable = True
+solid_layer_thickness = 1
+fill_density = 20
+nozzle_size = 0.5
+print_speed = 50
+print_temperature = 205
+print_temperature2 = 0
+print_temperature3 = 0
+print_temperature4 = 0
+print_bed_temperature = 60
+support = None
+platform_adhesion = None
+support_dual_extrusion = Both
+wipe_tower = False
+wipe_tower_volume = 15
+ooze_shield = False
+filament_diameter = 2.85
+filament_diameter2 = 0
+filament_diameter3 = 0
+filament_diameter4 = 0
+filament_flow = 100.0
+retraction_speed = 10
+retraction_amount = 1.5
+retraction_dual_amount = 16.5
+retraction_min_travel = 1.5
+retraction_combing = True
+retraction_minimal_extrusion = 0.005
+retraction_hop = 0.1
+bottom_thickness = 0.425
+layer0_width_factor = 125
+object_sink = 0.0
+overlap_dual = 0.15
+travel_speed = 175
+bottom_layer_speed = 15
+infill_speed = 40
+inset0_speed = 30
+insetx_speed = 35
+cool_min_layer_time = 20
+fan_enabled = True
+skirt_line_count = 1
+skirt_gap = 3.0
+skirt_minimal_length = 250
+fan_full_height = 0.5
+fan_speed = 75
+fan_speed_max = 100
+cool_min_feedrate = 10
+cool_head_lift = False
+solid_top = True
+solid_bottom = True
+fill_overlap = 15
+support_type = Lines
+support_angle = 45
+support_fill_rate = 30
+support_xy_distance = 0.7
+support_z_distance = 0.05
+spiralize = False
+simple_mode = False
+brim_line_count = 10
+raft_margin = 5.0
+raft_line_spacing = 3.0
+raft_base_thickness = 0.3
+raft_base_linewidth = 1.0
+raft_interface_thickness = 0.27
+raft_interface_linewidth = 0.4
+raft_airgap = 0.5
+raft_surface_layers = 2
+fix_horrible_union_all_type_a = True
+fix_horrible_union_all_type_b = False
+fix_horrible_use_open_bits = False
+fix_horrible_extensive_stitching = False
+plugin_config = 
+object_center_x = -1
+object_center_y = -1
+
+[alterations]
+start.gcode = ;This Gcode has been generated specifically for the LulzBot Mini
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Filament Diameter: {filament_diameter}
+	;Nozzle Size: {nozzle_size}
+	G21                          ; metric values
+	G90                          ; absolute positioning
+	M82                          ; set extruder to absolute mode
+	M107                         ; start with the fan off
+	G92 E0                       ; set extruder position to 0
+	M140 S{print_bed_temperature}; get bed heating up
+	G28                          ; home all
+	M109 S140                    ; set to cleaning temp and wait
+	G1 Z150 E-30 F75             ; suck up XXmm of filament
+	M109 S140                    ; heat up rest of way
+	G1 X45 Y174 F11520           ; move behind scraper
+	G1 Z0  F1200                 ; CRITICAL: set Z to height of top of scraper
+	G1 X45 Y174 Z-.5 F4000       ; wiping ; plunge into wipe pad
+	G1 X55 Y172 Z-.5 F4000       ; wiping
+	G1 X45 Y174 Z0 F4000         ; wiping
+	G1 X55 Y172 F4000            ; wiping
+	G1 X45 Y174 F4000            ; wiping
+	G1 X55 Y172 F4000            ; wiping
+	G1 X45 Y174 F4000            ; wiping
+	G1 X55 Y172 F4000            ; wiping
+	G1 X60 Y174 F4000            ; wiping
+	G1 X80 Y172 F4000            ; wiping
+	G1 X60 Y174 F4000            ; wiping
+	G1 X80 Y172 F4000            ; wiping
+	G1 X60 Y174 F4000            ; wiping
+	G1 X90 Y172 F4000            ; wiping
+	G1 X80 Y174 F4000            ; wiping
+	G1 X100 Y172 F4000           ; wiping
+	G1 X80 Y174 F4000            ; wiping
+	G1 X100 Y172 F4000           ; wiping
+	G1 X80 Y174 F4000            ; wiping
+	G1 X100 Y172 F4000           ; wiping
+	G1 X110 Y174 F4000           ; wiping
+	G1 X100 Y172 F4000           ; wiping
+	G1 X110 Y174 F4000           ; wiping
+	G1 X100 Y172 F4000           ; wiping
+	G1 X110 Y174 F4000           ; wiping
+	G1 X115 Y172 Z-0.5 F1000     ; wipe slower and bury noz in cleanish area
+	G1 Z10                       ; raise z
+	G28 X0 Y0                    ; home x and y
+	M109 S140                    ; set to probing temp
+	M204 S300                    ; Set probing acceleration
+	G29                          ; Probe
+	M204 S2000                   ; Restore standard acceleration
+	G1 X5 Y15 Z10 F5000          ; get out the way
+	G4 S1                        ; pause
+	M400                         ; clear buffer
+	M109 S{print_temperature}    ; set extruder temp and wait
+	G4 S15                       ; wait for bed to temp up
+	G1 Z2 E0 F75                 ; extrude filament back into nozzle
+	M140 S{print_bed_temperature}; get bed temping up during first layer
+end.gcode = 
+	M400
+	M104 S0                                      ; hotend off
+	M140 S0                                      ; heated bed heater off (if you have it)
+	M107                                         ; fans off
+	G92 E5                                       ; set extruder to 5mm for retract on print end
+	G1 X5 Y5 Z156 E0 F10000                      ; move to cooling positioning
+	M190 R50                                     ; wait for bed to cool
+	M104 S0                                      ;
+	G1 X145 Y175 Z156 F1000                      ; move to cooling positioning
+	M84                                          ; steppers off
+	G90                                          ; absolute positioning
+	;{profile_string}
+start2.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end2.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+start3.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T2                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end3.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M104 T2 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+start4.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T3                      ;Switch to the 4th extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T2                      ;Switch to the 3th extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end4.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M104 T2 S0                     ;extruder heater off
+	M104 T3 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+support_start.gcode = 
+support_end.gcode = 
+cool_start.gcode = 
+cool_end.gcode = 
+replace.csv = 
+preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+	;This code is added before the T(n)
+postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+	;This code is added after the T(n)
+
diff --git a/resources/quickprint/lulzbot_mini/PLA/Low/profile.ini b/resources/quickprint/lulzbot_mini/PLA/Low/profile.ini
new file mode 100644
index 00000000..2ca2c7da
--- /dev/null
+++ b/resources/quickprint/lulzbot_mini/PLA/Low/profile.ini
@@ -0,0 +1,293 @@
+[info]
+name = Fast Print
+order = 0
+
+[profile]
+layer_height = 0.38
+wall_thickness = 1
+retraction_enable = True
+solid_layer_thickness = 1
+fill_density = 20
+nozzle_size = 0.5
+print_speed = 50
+print_temperature = 205
+print_temperature2 = 0
+print_temperature3 = 0
+print_temperature4 = 0
+print_bed_temperature = 60
+support = None
+platform_adhesion = None
+support_dual_extrusion = Both
+wipe_tower = False
+wipe_tower_volume = 15
+ooze_shield = False
+filament_diameter = 2.85
+filament_diameter2 = 0
+filament_diameter3 = 0
+filament_diameter4 = 0
+filament_flow = 100.0
+retraction_speed = 10
+retraction_amount = 1.5
+retraction_dual_amount = 16.5
+retraction_min_travel = 1.5
+retraction_combing = True
+retraction_minimal_extrusion = 0.005
+retraction_hop = 0.1
+bottom_thickness = 0.425
+layer0_width_factor = 125
+object_sink = 0.0
+overlap_dual = 0.15
+travel_speed = 175
+bottom_layer_speed = 15
+infill_speed = 40
+inset0_speed = 30
+insetx_speed = 35
+cool_min_layer_time = 20
+fan_enabled = True
+skirt_line_count = 1
+skirt_gap = 3.0
+skirt_minimal_length = 250
+fan_full_height = 0.5
+fan_speed = 75
+fan_speed_max = 100
+cool_min_feedrate = 10
+cool_head_lift = False
+solid_top = True
+solid_bottom = True
+fill_overlap = 15
+support_type = Lines
+support_angle = 45
+support_fill_rate = 30
+support_xy_distance = 0.7
+support_z_distance = 0.05
+spiralize = False
+simple_mode = False
+brim_line_count = 10
+raft_margin = 5.0
+raft_line_spacing = 3.0
+raft_base_thickness = 0.3
+raft_base_linewidth = 1.0
+raft_interface_thickness = 0.27
+raft_interface_linewidth = 0.4
+raft_airgap = 0.5
+raft_surface_layers = 2
+fix_horrible_union_all_type_a = True
+fix_horrible_union_all_type_b = False
+fix_horrible_use_open_bits = False
+fix_horrible_extensive_stitching = False
+plugin_config = 
+object_center_x = -1
+object_center_y = -1
+
+[alterations]
+start.gcode = ;This Gcode has been generated specifically for the LulzBot Mini
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Filament Diameter: {filament_diameter}
+	;Nozzle Size: {nozzle_size}
+	G21                          ; metric values
+	G90                          ; absolute positioning
+	M82                          ; set extruder to absolute mode
+	M107                         ; start with the fan off
+	G92 E0                       ; set extruder position to 0
+	M140 S{print_bed_temperature}; get bed heating up
+	G28                          ; home all
+	M109 S140                    ; set to cleaning temp and wait
+	G1 Z150 E-30 F75             ; suck up XXmm of filament
+	M109 S140                    ; heat up rest of way
+	G1 X45 Y174 F11520           ; move behind scraper
+	G1 Z0  F1200                 ; CRITICAL: set Z to height of top of scraper
+	G1 X45 Y174 Z-.5 F4000       ; wiping ; plunge into wipe pad
+	G1 X55 Y172 Z-.5 F4000       ; wiping
+	G1 X45 Y174 Z0 F4000         ; wiping
+	G1 X55 Y172 F4000            ; wiping
+	G1 X45 Y174 F4000            ; wiping
+	G1 X55 Y172 F4000            ; wiping
+	G1 X45 Y174 F4000            ; wiping
+	G1 X55 Y172 F4000            ; wiping
+	G1 X60 Y174 F4000            ; wiping
+	G1 X80 Y172 F4000            ; wiping
+	G1 X60 Y174 F4000            ; wiping
+	G1 X80 Y172 F4000            ; wiping
+	G1 X60 Y174 F4000            ; wiping
+	G1 X90 Y172 F4000            ; wiping
+	G1 X80 Y174 F4000            ; wiping
+	G1 X100 Y172 F4000           ; wiping
+	G1 X80 Y174 F4000            ; wiping
+	G1 X100 Y172 F4000           ; wiping
+	G1 X80 Y174 F4000            ; wiping
+	G1 X100 Y172 F4000           ; wiping
+	G1 X110 Y174 F4000           ; wiping
+	G1 X100 Y172 F4000           ; wiping
+	G1 X110 Y174 F4000           ; wiping
+	G1 X100 Y172 F4000           ; wiping
+	G1 X110 Y174 F4000           ; wiping
+	G1 X115 Y172 Z-0.5 F1000     ; wipe slower and bury noz in cleanish area
+	G1 Z10                       ; raise z
+	G28 X0 Y0                    ; home x and y
+	M109 S140                    ; set to probing temp
+	M204 S300                    ; Set probing acceleration
+	G29                          ; Probe
+	M204 S2000                   ; Restore standard acceleration
+	G1 X5 Y15 Z10 F5000          ; get out the way
+	G4 S1                        ; pause
+	M400                         ; clear buffer
+	M109 S{print_temperature}    ; set extruder temp and wait
+	G4 S15                       ; wait for bed to temp up
+	G1 Z2 E0 F75                 ; extrude filament back into nozzle
+	M140 S{print_bed_temperature}; get bed temping up during first layer
+end.gcode = 
+	M400
+	M104 S0                                      ; hotend off
+	M140 S0                                      ; heated bed heater off (if you have it)
+	M107                                         ; fans off
+	G92 E5                                       ; set extruder to 5mm for retract on print end
+	G1 X5 Y5 Z156 E0 F10000                      ; move to cooling positioning
+	M190 R50                                     ; wait for bed to cool
+	M104 S0                                      ;
+	G1 X145 Y175 Z156 F1000                      ; move to cooling positioning
+	M84                                          ; steppers off
+	G90                                          ; absolute positioning
+	;{profile_string}
+start2.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end2.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+start3.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T2                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end3.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M104 T2 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+start4.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T3                      ;Switch to the 4th extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T2                      ;Switch to the 3th extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end4.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M104 T2 S0                     ;extruder heater off
+	M104 T3 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+support_start.gcode = 
+support_end.gcode = 
+cool_start.gcode = 
+cool_end.gcode = 
+replace.csv = 
+preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+	;This code is added before the T(n)
+postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+	;This code is added after the T(n)
+
diff --git a/resources/quickprint/lulzbot_mini/PLA/Normal/profile.ini b/resources/quickprint/lulzbot_mini/PLA/Normal/profile.ini
new file mode 100644
index 00000000..34812c6b
--- /dev/null
+++ b/resources/quickprint/lulzbot_mini/PLA/Normal/profile.ini
@@ -0,0 +1,294 @@
+[info]
+name = Normal Quality
+order = 1
+default = 1
+
+[profile]
+layer_height = 0.25
+wall_thickness = 1
+retraction_enable = True
+solid_layer_thickness = 1
+fill_density = 20
+nozzle_size = 0.5
+print_speed = 50
+print_temperature = 205
+print_temperature2 = 0
+print_temperature3 = 0
+print_temperature4 = 0
+print_bed_temperature = 60
+support = None
+platform_adhesion = None
+support_dual_extrusion = Both
+wipe_tower = False
+wipe_tower_volume = 15
+ooze_shield = False
+filament_diameter = 2.85
+filament_diameter2 = 0
+filament_diameter3 = 0
+filament_diameter4 = 0
+filament_flow = 100.0
+retraction_speed = 10
+retraction_amount = 1.5
+retraction_dual_amount = 16.5
+retraction_min_travel = 1.5
+retraction_combing = True
+retraction_minimal_extrusion = 0.005
+retraction_hop = 0.1
+bottom_thickness = 0.425
+layer0_width_factor = 125
+object_sink = 0.0
+overlap_dual = 0.15
+travel_speed = 175
+bottom_layer_speed = 15
+infill_speed = 40
+inset0_speed = 30
+insetx_speed = 35
+cool_min_layer_time = 20
+fan_enabled = True
+skirt_line_count = 1
+skirt_gap = 3.0
+skirt_minimal_length = 250
+fan_full_height = 0.5
+fan_speed = 75
+fan_speed_max = 100
+cool_min_feedrate = 10
+cool_head_lift = False
+solid_top = True
+solid_bottom = True
+fill_overlap = 15
+support_type = Lines
+support_angle = 45
+support_fill_rate = 30
+support_xy_distance = 0.7
+support_z_distance = 0.05
+spiralize = False
+simple_mode = False
+brim_line_count = 10
+raft_margin = 5.0
+raft_line_spacing = 3.0
+raft_base_thickness = 0.3
+raft_base_linewidth = 1.0
+raft_interface_thickness = 0.27
+raft_interface_linewidth = 0.4
+raft_airgap = 0.5
+raft_surface_layers = 2
+fix_horrible_union_all_type_a = True
+fix_horrible_union_all_type_b = False
+fix_horrible_use_open_bits = False
+fix_horrible_extensive_stitching = False
+plugin_config = 
+object_center_x = -1
+object_center_y = -1
+
+[alterations]
+start.gcode = ;This Gcode has been generated specifically for the LulzBot Mini
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Filament Diameter: {filament_diameter}
+	;Nozzle Size: {nozzle_size}
+	G21                          ; metric values
+	G90                          ; absolute positioning
+	M82                          ; set extruder to absolute mode
+	M107                         ; start with the fan off
+	G92 E0                       ; set extruder position to 0
+	M140 S{print_bed_temperature}; get bed heating up
+	G28                          ; home all
+	M109 S140                    ; set to cleaning temp and wait
+	G1 Z150 E-30 F75             ; suck up XXmm of filament
+	M109 S140                    ; heat up rest of way
+	G1 X45 Y174 F11520           ; move behind scraper
+	G1 Z0  F1200                 ; CRITICAL: set Z to height of top of scraper
+	G1 X45 Y174 Z-.5 F4000       ; wiping ; plunge into wipe pad
+	G1 X55 Y172 Z-.5 F4000       ; wiping
+	G1 X45 Y174 Z0 F4000         ; wiping
+	G1 X55 Y172 F4000            ; wiping
+	G1 X45 Y174 F4000            ; wiping
+	G1 X55 Y172 F4000            ; wiping
+	G1 X45 Y174 F4000            ; wiping
+	G1 X55 Y172 F4000            ; wiping
+	G1 X60 Y174 F4000            ; wiping
+	G1 X80 Y172 F4000            ; wiping
+	G1 X60 Y174 F4000            ; wiping
+	G1 X80 Y172 F4000            ; wiping
+	G1 X60 Y174 F4000            ; wiping
+	G1 X90 Y172 F4000            ; wiping
+	G1 X80 Y174 F4000            ; wiping
+	G1 X100 Y172 F4000           ; wiping
+	G1 X80 Y174 F4000            ; wiping
+	G1 X100 Y172 F4000           ; wiping
+	G1 X80 Y174 F4000            ; wiping
+	G1 X100 Y172 F4000           ; wiping
+	G1 X110 Y174 F4000           ; wiping
+	G1 X100 Y172 F4000           ; wiping
+	G1 X110 Y174 F4000           ; wiping
+	G1 X100 Y172 F4000           ; wiping
+	G1 X110 Y174 F4000           ; wiping
+	G1 X115 Y172 Z-0.5 F1000     ; wipe slower and bury noz in cleanish area
+	G1 Z10                       ; raise z
+	G28 X0 Y0                    ; home x and y
+	M109 S140                    ; set to probing temp
+	M204 S300                    ; Set probing acceleration
+	G29                          ; Probe
+	M204 S2000                   ; Restore standard acceleration
+	G1 X5 Y15 Z10 F5000          ; get out the way
+	G4 S1                        ; pause
+	M400                         ; clear buffer
+	M109 S{print_temperature}    ; set extruder temp and wait
+	G4 S15                       ; wait for bed to temp up
+	G1 Z2 E0 F75                 ; extrude filament back into nozzle
+	M140 S{print_bed_temperature}; get bed temping up during first layer
+end.gcode = 
+	M400
+	M104 S0                                      ; hotend off
+	M140 S0                                      ; heated bed heater off (if you have it)
+	M107                                         ; fans off
+	G92 E5                                       ; set extruder to 5mm for retract on print end
+	G1 X5 Y5 Z156 E0 F10000                      ; move to cooling positioning
+	M190 R50                                     ; wait for bed to cool
+	M104 S0                                      ;
+	G1 X145 Y175 Z156 F1000                      ; move to cooling positioning
+	M84                                          ; steppers off
+	G90                                          ; absolute positioning
+	;{profile_string}
+start2.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end2.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+start3.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T2                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end3.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M104 T2 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+start4.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T3                      ;Switch to the 4th extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T2                      ;Switch to the 3th extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end4.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M104 T2 S0                     ;extruder heater off
+	M104 T3 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+support_start.gcode = 
+support_end.gcode = 
+cool_start.gcode = 
+cool_end.gcode = 
+replace.csv = 
+preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+	;This code is added before the T(n)
+postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+	;This code is added after the T(n)
+
diff --git a/resources/quickprint/lulzbot_mini/PLA/Ulti/profile.ini b/resources/quickprint/lulzbot_mini/PLA/Ulti/profile.ini
new file mode 100644
index 00000000..e60192f1
--- /dev/null
+++ b/resources/quickprint/lulzbot_mini/PLA/Ulti/profile.ini
@@ -0,0 +1,3 @@
+[info]
+name = Ulti quality
+disabled = True
diff --git a/resources/quickprint/lulzbot_mini/PLA/profile.ini b/resources/quickprint/lulzbot_mini/PLA/profile.ini
new file mode 100644
index 00000000..a70247b8
--- /dev/null
+++ b/resources/quickprint/lulzbot_mini/PLA/profile.ini
@@ -0,0 +1,4 @@
+[info]
+name = PLA
+order = 2
+
diff --git a/resources/quickprint/lulzbot_mini/extra/mini.ini b/resources/quickprint/lulzbot_mini/extra/mini.ini
deleted file mode 100644
index ac56ba24..00000000
--- a/resources/quickprint/lulzbot_mini/extra/mini.ini
+++ /dev/null
@@ -1,16 +0,0 @@
-[profile]
-filament_diameter = 2.85
-nozzle_size = 0.5
-wall_thickness = 1
-fill_density = 20
-retraction_speed = 10
-retraction_hop = 0.1
-bottom_thickness = 0.425
-layer0_width_factor = 125
-travel_speed = 175
-skirt_minimal_length = 250
-brim_line_count = 10
-raft_airgap = 0.5
-bottom_layer_speed = 15
-fan_full_height = 0.5
-retraction_minimal_extrusion = 0.005
diff --git a/resources/quickprint/lulzbot_mini/materials/1_hips.ini b/resources/quickprint/lulzbot_mini/materials/1_hips.ini
deleted file mode 100644
index ce043371..00000000
--- a/resources/quickprint/lulzbot_mini/materials/1_hips.ini
+++ /dev/null
@@ -1,78 +0,0 @@
-[info]
-name = HIPS
-
-[profile]
-fan_speed_max = 50
-print_temperature = 240
-print_bed_temperature = 110
-solid_layer_thickness = 0.8
-retraction_amount = 1
-fan_speed = 40
-start.gcode = ;This Gcode has been generated specifically for the LulzBot Mini
-	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
-	;Filament Diameter: {filament_diameter}
-	;Nozzle Size: {nozzle_size}
-	G21                          ; metric values
-	G90                          ; absolute positioning
-	M82                          ; set extruder to absolute mode
-	M107                         ; start with the fan off
-	G92 E0                       ; set extruder position to 0
-	M140 S110                    ; get bed heating up
-	G28                          ; home all
-	M109 S150                    ; set to cleaning temp and wait
-	G1 Z150 E-30 F75             ; suck up XXmm of filament
-	M109 S170                    ; heat up rest of way
-	G1 X45 Y174 F11520           ; move behind scraper
-	G1 Z0  F1200                 ; CRITICAL: set Z to height of top of scraper
-	G1 X45 Y174 Z-.5 F4000       ; wiping ; plunge into wipe pad
-	G1 X55 Y172 Z-.5 F4000       ; wiping
-	G1 X45 Y174 Z0 F4000         ; wiping
-	G1 X55 Y172 F4000            ; wiping
-	G1 X45 Y174 F4000            ; wiping
-	G1 X55 Y172 F4000            ; wiping
-	G1 X45 Y174 F4000            ; wiping
-	G1 X55 Y172 F4000            ; wiping
-	G1 X60 Y174 F4000            ; wiping
-	G1 X80 Y172 F4000            ; wiping
-	G1 X60 Y174 F4000            ; wiping
-	G1 X80 Y172 F4000            ; wiping
-	G1 X60 Y174 F4000            ; wiping
-	G1 X90 Y172 F4000            ; wiping
-	G1 X80 Y174 F4000            ; wiping
-	G1 X100 Y172 F4000           ; wiping
-	G1 X80 Y174 F4000            ; wiping
-	G1 X100 Y172 F4000           ; wiping
-	G1 X80 Y174 F4000            ; wiping
-	G1 X100 Y172 F4000           ; wiping
-	G1 X110 Y174 F4000           ; wiping
-	G1 X100 Y172 F4000           ; wiping
-	G1 X110 Y174 F4000           ; wiping
-	G1 X100 Y172 F4000           ; wiping
-	G1 X110 Y174 F4000           ; wiping
-	G1 X115 Y172 Z-0.5 F1000     ; wipe slower and bury noz in cleanish area
-	G1 Z10                       ; raise z
-	G28 X0 Y0                    ; home x and y
-	M109 S170                    ; set to probing temp
-	M204 S300                    ; set accel for probing
-	G29                          ; Probe
-	M204 S2000                   ; set accel back to normal
-	G1 X5 Y15 Z10 F5000          ; get out the way
-	M400                         ; clear buffer
-	G4 S1                        ; pause
-	M109 S{print_temperature}    ; set extruder temp and wait
-	G4 S25                       ; wait for bed to temp up
-	G1 Z2 E0 F75                 ; extrude filament back into nozzle
-	M140 S{print_bed_temperature}; get bed temping up during first layer
-end.gcode = M400
-	M104 S0                         ; Hotend off
-	M140 S0                         ; heated bed heater off (if you have it)
-	M107                            ; fans off
-	G92 E0                          ; set extruder to 0
-	G1 E-3 F300                     ; retract a bit to relieve pressure
-	G1 X5 Y5 Z156 F10000            ; move to cooling positioning
-	M190 R60                        ; wait for bed to cool
-	M140 S0                         ; Turn off bed temp
-	G1 X145 Y175 Z156 F1000         ; move to cooling positioning
-	M84                             ; steppers off
-	G90                             ; absolute positioning
-	;{profile_string}
diff --git a/resources/quickprint/lulzbot_mini/materials/2_abs.ini b/resources/quickprint/lulzbot_mini/materials/2_abs.ini
deleted file mode 100644
index 58e4b776..00000000
--- a/resources/quickprint/lulzbot_mini/materials/2_abs.ini
+++ /dev/null
@@ -1,78 +0,0 @@
-[info]
-name = ABS
-
-[profile]
-fan_speed_max = 60
-print_temperature = 240
-print_bed_temperature = 110
-solid_layer_thickness = 0.8
-retraction_amount = 1
-fan_speed = 40
-start.gcode = ;This Gcode has been generated specifically for the LulzBot Mini
-	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
-	;Filament Diameter: {filament_diameter}
-	;Nozzle Size: {nozzle_size}
-	G21                          ; metric values
-	G90                          ; absolute positioning
-	M82                          ; set extruder to absolute mode
-	M107                         ; start with the fan off
-	G92 E0                       ; set extruder position to 0
-	M140 S110                    ; get bed heating up
-	G28                          ; home all
-	M109 S150                    ; set to cleaning temp and wait
-	G1 Z150 E-30 F75             ; suck up XXmm of filament
-	M109 S170                    ; heat up rest of way
-	G1 X45 Y174 F11520           ; move behind scraper
-	G1 Z0  F1200                 ; CRITICAL: set Z to height of top of scraper
-	G1 X45 Y174 Z-.5 F4000       ; wiping ; plunge into wipe pad
-	G1 X55 Y172 Z-.5 F4000       ; wiping
-	G1 X45 Y174 Z0 F4000         ; wiping
-	G1 X55 Y172 F4000            ; wiping
-	G1 X45 Y174 F4000            ; wiping
-	G1 X55 Y172 F4000            ; wiping
-	G1 X45 Y174 F4000            ; wiping
-	G1 X55 Y172 F4000            ; wiping
-	G1 X60 Y174 F4000            ; wiping
-	G1 X80 Y172 F4000            ; wiping
-	G1 X60 Y174 F4000            ; wiping
-	G1 X80 Y172 F4000            ; wiping
-	G1 X60 Y174 F4000            ; wiping
-	G1 X90 Y172 F4000            ; wiping
-	G1 X80 Y174 F4000            ; wiping
-	G1 X100 Y172 F4000           ; wiping
-	G1 X80 Y174 F4000            ; wiping
-	G1 X100 Y172 F4000           ; wiping
-	G1 X80 Y174 F4000            ; wiping
-	G1 X100 Y172 F4000           ; wiping
-	G1 X110 Y174 F4000           ; wiping
-	G1 X100 Y172 F4000           ; wiping
-	G1 X110 Y174 F4000           ; wiping
-	G1 X100 Y172 F4000           ; wiping
-	G1 X110 Y174 F4000           ; wiping
-	G1 X115 Y172 Z-0.5 F1000     ; wipe slower and bury noz in cleanish area
-	G1 Z10                       ; raise z
-	G28 X0 Y0                    ; home x and y
-	M109 S170                    ; set to probing temp
-	M204 S300                    ; set accel for probing
-	G29                          ; Probe
-	M204 S2000                   ; set accel back to normal
-	G1 X5 Y15 Z10 F5000          ; get out the way
-	M400                         ; clear buffer
-	G4 S1                        ; pause
-	M109 S{print_temperature}    ; set extruder temp and wait
-	G4 S25                       ; wait for bed to temp up
-	G1 Z2 E0 F75                 ; extrude filament back into nozzle
-	M140 S{print_bed_temperature}; get bed temping up during first layer
-end.gcode = M400
-	M104 S0                         ; Hotend off
-	M140 S0                         ; heated bed heater off (if you have it)
-	M107                            ; fans off
-	G92 E0                          ; set extruder to 0
-	G1 E-3 F300                     ; retract a bit to relieve pressure
-	G1 X5 Y5 Z156 F10000            ; move to cooling positioning
-	M190 R60                        ; wait for bed to cool
-	M140 S0                         ; Turn off bed temp
-	G1 X145 Y175 Z156 F1000         ; move to cooling positioning
-	M84                             ; steppers off
-	G90                             ; absolute positioning
-	;{profile_string}
diff --git a/resources/quickprint/lulzbot_mini/materials/3_pla.ini b/resources/quickprint/lulzbot_mini/materials/3_pla.ini
deleted file mode 100644
index fcdc248c..00000000
--- a/resources/quickprint/lulzbot_mini/materials/3_pla.ini
+++ /dev/null
@@ -1,80 +0,0 @@
-[info]
-name = PLA
-
-[profile]
-print_temperature = 205
-print_bed_temperature = 60
-solid_layer_thickness = 1
-print_speed = 50
-retraction_amount = 1.5
-bottom_layer_speed = 15
-cool_min_layer_time = 20
-fan_speed = 75
-fan_speed_max = 100
-start.gcode = ;This Gcode has been generated specifically for the LulzBot Mini
-	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
-	;Filament Diameter: {filament_diameter}
-	;Nozzle Size: {nozzle_size}
-	G21                          ; metric values
-	G90                          ; absolute positioning
-	M82                          ; set extruder to absolute mode
-	M107                         ; start with the fan off
-	G92 E0                       ; set extruder position to 0
-	M140 S{print_bed_temperature}; get bed heating up
-	G28                          ; home all
-	M109 S140                    ; set to cleaning temp and wait
-	G1 Z150 E-30 F75             ; suck up XXmm of filament
-	M109 S140                    ; heat up rest of way
-	G1 X45 Y174 F11520           ; move behind scraper
-	G1 Z0  F1200                 ; CRITICAL: set Z to height of top of scraper
-	G1 X45 Y174 Z-.5 F4000       ; wiping ; plunge into wipe pad
-	G1 X55 Y172 Z-.5 F4000       ; wiping
-	G1 X45 Y174 Z0 F4000         ; wiping
-	G1 X55 Y172 F4000            ; wiping
-	G1 X45 Y174 F4000            ; wiping
-	G1 X55 Y172 F4000            ; wiping
-	G1 X45 Y174 F4000            ; wiping
-	G1 X55 Y172 F4000            ; wiping
-	G1 X60 Y174 F4000            ; wiping
-	G1 X80 Y172 F4000            ; wiping
-	G1 X60 Y174 F4000            ; wiping
-	G1 X80 Y172 F4000            ; wiping
-	G1 X60 Y174 F4000            ; wiping
-	G1 X90 Y172 F4000            ; wiping
-	G1 X80 Y174 F4000            ; wiping
-	G1 X100 Y172 F4000           ; wiping
-	G1 X80 Y174 F4000            ; wiping
-	G1 X100 Y172 F4000           ; wiping
-	G1 X80 Y174 F4000            ; wiping
-	G1 X100 Y172 F4000           ; wiping
-	G1 X110 Y174 F4000           ; wiping
-	G1 X100 Y172 F4000           ; wiping
-	G1 X110 Y174 F4000           ; wiping
-	G1 X100 Y172 F4000           ; wiping
-	G1 X110 Y174 F4000           ; wiping
-	G1 X115 Y172 Z-0.5 F1000     ; wipe slower and bury noz in cleanish area
-	G1 Z10                       ; raise z
-	G28 X0 Y0                    ; home x and y
-	M109 S140                    ; set to probing temp
-	M204 S300                    ; set accel for probing
-	G29                          ; Probe
-	M204 S2000                   ; set accel back to normal
-	G1 X5 Y15 Z10 F5000          ; get out the way
-	G4 S1                        ; pause
-	M400                         ; clear buffer
-	M109 S{print_temperature}    ; set extruder temp and wait
-	G4 S15                       ; wait for bed to temp up
-	G1 Z2 E0 F75                 ; extrude filament back into nozzle
-	M140 S{print_bed_temperature}; get bed temping up during first layer
-end.gcode = M400
-	M104 S0                         ; Hotend off
-	M140 S0                         ; heated bed heater off (if you have it)
-	M107                            ; fans off
-	G92 E5                          ; set extruder to 5mm for retract on print end
-	G1 X5 Y5 Z156 F10000            ; move to cooling positioning
-	M190 R60                        ; wait for bed to cool
-	M140 S0                         ; Turn off bed temp
-	G1 X145 Y175 Z156 F1000         ; move to cooling positioning
-	M84                             ; steppers off
-	G90                             ; absolute positioning
-	;{profile_string}
diff --git a/resources/quickprint/lulzbot_mini/options/1_support.ini b/resources/quickprint/lulzbot_mini/options/1_support.ini
deleted file mode 100644
index 807e5e12..00000000
--- a/resources/quickprint/lulzbot_mini/options/1_support.ini
+++ /dev/null
@@ -1,10 +0,0 @@
-[info]
-name = Print support structure
-
-[profile]
-support = Everywhere
-support_type = Lines
-support_angle = 45
-support_fill_rate = 30
-support_xy_distance = 0.7
-support_z_distance = 0.05
diff --git a/resources/quickprint/lulzbot_mini/options/2_brim.ini b/resources/quickprint/lulzbot_mini/options/2_brim.ini
deleted file mode 100644
index 8b641c4c..00000000
--- a/resources/quickprint/lulzbot_mini/options/2_brim.ini
+++ /dev/null
@@ -1,5 +0,0 @@
-[info]
-name = Print Brim
-
-[profile]
-platform_adhesion = Brim
diff --git a/resources/quickprint/lulzbot_mini/profiles/1_low.ini b/resources/quickprint/lulzbot_mini/profiles/1_low.ini
deleted file mode 100644
index 86aae4b8..00000000
--- a/resources/quickprint/lulzbot_mini/profiles/1_low.ini
+++ /dev/null
@@ -1,5 +0,0 @@
-[info]
-name = Fast print
-
-[profile]
-layer_height = 0.38
diff --git a/resources/quickprint/lulzbot_mini/profiles/2_normal.ini b/resources/quickprint/lulzbot_mini/profiles/2_normal.ini
deleted file mode 100644
index 2a63a4e9..00000000
--- a/resources/quickprint/lulzbot_mini/profiles/2_normal.ini
+++ /dev/null
@@ -1,6 +0,0 @@
-[info]
-name = Normal print
-
-[profile]
-layer_height = 0.25
-
diff --git a/resources/quickprint/lulzbot_mini/profiles/3_high.ini b/resources/quickprint/lulzbot_mini/profiles/3_high.ini
deleted file mode 100644
index 0ae9a8eb..00000000
--- a/resources/quickprint/lulzbot_mini/profiles/3_high.ini
+++ /dev/null
@@ -1,11 +0,0 @@
-[info]
-name = High quality
-
-[profile]
-# ABS and HIPS :
-#layer_height = 0.18
-
-# PLA :
-#layer_height = 0.14
-
-
diff --git a/resources/quickprint/lulzbot_TAZ_4/options/2_brim.ini b/resources/quickprint/option_brim.ini
similarity index 79%
rename from resources/quickprint/lulzbot_TAZ_4/options/2_brim.ini
rename to resources/quickprint/option_brim.ini
index 8b641c4c..72efe742 100644
--- a/resources/quickprint/lulzbot_TAZ_4/options/2_brim.ini
+++ b/resources/quickprint/option_brim.ini
@@ -1,5 +1,6 @@
 [info]
 name = Print Brim
+order = 1
 
 [profile]
 platform_adhesion = Brim
diff --git a/resources/quickprint/lulzbot_TAZ_4/options/1_support.ini b/resources/quickprint/option_support.ini
similarity index 89%
rename from resources/quickprint/lulzbot_TAZ_4/options/1_support.ini
rename to resources/quickprint/option_support.ini
index 807e5e12..e544138d 100644
--- a/resources/quickprint/lulzbot_TAZ_4/options/1_support.ini
+++ b/resources/quickprint/option_support.ini
@@ -1,5 +1,6 @@
 [info]
 name = Print support structure
+order = 0
 
 [profile]
 support = Everywhere
diff --git a/resources/quickprint/options/1_support.ini b/resources/quickprint/options/1_support.ini
deleted file mode 100644
index c25a5538..00000000
--- a/resources/quickprint/options/1_support.ini
+++ /dev/null
@@ -1,5 +0,0 @@
-[info]
-name = Print support structure
-
-[profile]
-support = Exterior Only
diff --git a/resources/quickprint/options/2_brim.ini b/resources/quickprint/options/2_brim.ini
deleted file mode 100644
index 8b641c4c..00000000
--- a/resources/quickprint/options/2_brim.ini
+++ /dev/null
@@ -1,5 +0,0 @@
-[info]
-name = Print Brim
-
-[profile]
-platform_adhesion = Brim
diff --git a/resources/quickprint/ultimaker2/ABS/profile.ini b/resources/quickprint/ultimaker2/ABS/profile.ini
new file mode 100644
index 00000000..84259445
--- /dev/null
+++ b/resources/quickprint/ultimaker2/ABS/profile.ini
@@ -0,0 +1,2 @@
+[info]
+disabled = True
diff --git a/resources/quickprint/ultimaker2/PET/profile.ini b/resources/quickprint/ultimaker2/PET/profile.ini
new file mode 100644
index 00000000..84259445
--- /dev/null
+++ b/resources/quickprint/ultimaker2/PET/profile.ini
@@ -0,0 +1,2 @@
+[info]
+disabled = True
diff --git a/resources/quickprint/ultimaker2/PLA/High/profile.ini b/resources/quickprint/ultimaker2/PLA/High/profile.ini
new file mode 100644
index 00000000..8743486a
--- /dev/null
+++ b/resources/quickprint/ultimaker2/PLA/High/profile.ini
@@ -0,0 +1,11 @@
+[info]
+name = High quality
+order = 2
+
+[profile]
+layer_height = 0.06
+infill_speed = 80
+solidarea_speed = 15
+inset0_speed = 30
+insetx_speed = 60
+
diff --git a/resources/quickprint/ultimaker2/PLA/Low/profile.ini b/resources/quickprint/ultimaker2/PLA/Low/profile.ini
new file mode 100644
index 00000000..b04241b6
--- /dev/null
+++ b/resources/quickprint/ultimaker2/PLA/Low/profile.ini
@@ -0,0 +1,14 @@
+[info]
+name = Fast print
+order = 0
+
+[profile]
+layer_height = 0.15
+wall_thickness = 1
+fill_density = 10
+bottom_layer_speed = 30
+infill_speed = 100
+solidarea_speed = 30
+inset0_speed = 40
+insetx_speed = 80
+cool_min_layer_time = 3
diff --git a/resources/quickprint/ultimaker2/PLA/Normal/profile.ini b/resources/quickprint/ultimaker2/PLA/Normal/profile.ini
new file mode 100644
index 00000000..162cfaf2
--- /dev/null
+++ b/resources/quickprint/ultimaker2/PLA/Normal/profile.ini
@@ -0,0 +1,12 @@
+[info]
+name = Normal print
+order = 1
+default = 1
+
+[profile]
+layer_height = 0.1
+infill_speed = 80
+solidarea_speed = 15
+inset0_speed = 30
+insetx_speed = 60
+
diff --git a/resources/quickprint/ultimaker2/PLA/Ulti/profile.ini b/resources/quickprint/ultimaker2/PLA/Ulti/profile.ini
new file mode 100644
index 00000000..caa5b0ab
--- /dev/null
+++ b/resources/quickprint/ultimaker2/PLA/Ulti/profile.ini
@@ -0,0 +1,11 @@
+[info]
+name = Ulti quality
+order = 3
+
+[profile]
+layer_height = 0.04
+infill_speed = 80
+solidarea_speed = 15
+inset0_speed = 30
+insetx_speed = 60
+
diff --git a/resources/quickprint/ultimaker2/PLA/profile.ini b/resources/quickprint/ultimaker2/PLA/profile.ini
new file mode 100644
index 00000000..36815aed
--- /dev/null
+++ b/resources/quickprint/ultimaker2/PLA/profile.ini
@@ -0,0 +1,6 @@
+[info]
+name = PLA
+order = 0
+always_visible = False
+
+[profile]
diff --git a/resources/quickprint/ultimaker2extended/ABS/profile.ini b/resources/quickprint/ultimaker2extended/ABS/profile.ini
new file mode 100644
index 00000000..84259445
--- /dev/null
+++ b/resources/quickprint/ultimaker2extended/ABS/profile.ini
@@ -0,0 +1,2 @@
+[info]
+disabled = True
diff --git a/resources/quickprint/ultimaker2extended/PET/profile.ini b/resources/quickprint/ultimaker2extended/PET/profile.ini
new file mode 100644
index 00000000..84259445
--- /dev/null
+++ b/resources/quickprint/ultimaker2extended/PET/profile.ini
@@ -0,0 +1,2 @@
+[info]
+disabled = True
diff --git a/resources/quickprint/ultimaker2extended/PLA/High/profile.ini b/resources/quickprint/ultimaker2extended/PLA/High/profile.ini
new file mode 100644
index 00000000..8743486a
--- /dev/null
+++ b/resources/quickprint/ultimaker2extended/PLA/High/profile.ini
@@ -0,0 +1,11 @@
+[info]
+name = High quality
+order = 2
+
+[profile]
+layer_height = 0.06
+infill_speed = 80
+solidarea_speed = 15
+inset0_speed = 30
+insetx_speed = 60
+
diff --git a/resources/quickprint/ultimaker2extended/PLA/Low/profile.ini b/resources/quickprint/ultimaker2extended/PLA/Low/profile.ini
new file mode 100644
index 00000000..b04241b6
--- /dev/null
+++ b/resources/quickprint/ultimaker2extended/PLA/Low/profile.ini
@@ -0,0 +1,14 @@
+[info]
+name = Fast print
+order = 0
+
+[profile]
+layer_height = 0.15
+wall_thickness = 1
+fill_density = 10
+bottom_layer_speed = 30
+infill_speed = 100
+solidarea_speed = 30
+inset0_speed = 40
+insetx_speed = 80
+cool_min_layer_time = 3
diff --git a/resources/quickprint/ultimaker2extended/PLA/Normal/profile.ini b/resources/quickprint/ultimaker2extended/PLA/Normal/profile.ini
new file mode 100644
index 00000000..162cfaf2
--- /dev/null
+++ b/resources/quickprint/ultimaker2extended/PLA/Normal/profile.ini
@@ -0,0 +1,12 @@
+[info]
+name = Normal print
+order = 1
+default = 1
+
+[profile]
+layer_height = 0.1
+infill_speed = 80
+solidarea_speed = 15
+inset0_speed = 30
+insetx_speed = 60
+
diff --git a/resources/quickprint/ultimaker2extended/PLA/Ulti/profile.ini b/resources/quickprint/ultimaker2extended/PLA/Ulti/profile.ini
new file mode 100644
index 00000000..caa5b0ab
--- /dev/null
+++ b/resources/quickprint/ultimaker2extended/PLA/Ulti/profile.ini
@@ -0,0 +1,11 @@
+[info]
+name = Ulti quality
+order = 3
+
+[profile]
+layer_height = 0.04
+infill_speed = 80
+solidarea_speed = 15
+inset0_speed = 30
+insetx_speed = 60
+
diff --git a/resources/quickprint/ultimaker2extended/PLA/profile.ini b/resources/quickprint/ultimaker2extended/PLA/profile.ini
new file mode 100644
index 00000000..36815aed
--- /dev/null
+++ b/resources/quickprint/ultimaker2extended/PLA/profile.ini
@@ -0,0 +1,6 @@
+[info]
+name = PLA
+order = 0
+always_visible = False
+
+[profile]
diff --git a/resources/quickprint/ultimaker2go/ABS/profile.ini b/resources/quickprint/ultimaker2go/ABS/profile.ini
new file mode 100644
index 00000000..84259445
--- /dev/null
+++ b/resources/quickprint/ultimaker2go/ABS/profile.ini
@@ -0,0 +1,2 @@
+[info]
+disabled = True
diff --git a/resources/quickprint/ultimaker2go/PET/profile.ini b/resources/quickprint/ultimaker2go/PET/profile.ini
new file mode 100644
index 00000000..84259445
--- /dev/null
+++ b/resources/quickprint/ultimaker2go/PET/profile.ini
@@ -0,0 +1,2 @@
+[info]
+disabled = True
diff --git a/resources/quickprint/ultimaker2go/PLA/High/profile.ini b/resources/quickprint/ultimaker2go/PLA/High/profile.ini
new file mode 100644
index 00000000..8743486a
--- /dev/null
+++ b/resources/quickprint/ultimaker2go/PLA/High/profile.ini
@@ -0,0 +1,11 @@
+[info]
+name = High quality
+order = 2
+
+[profile]
+layer_height = 0.06
+infill_speed = 80
+solidarea_speed = 15
+inset0_speed = 30
+insetx_speed = 60
+
diff --git a/resources/quickprint/ultimaker2go/PLA/Low/profile.ini b/resources/quickprint/ultimaker2go/PLA/Low/profile.ini
new file mode 100644
index 00000000..b04241b6
--- /dev/null
+++ b/resources/quickprint/ultimaker2go/PLA/Low/profile.ini
@@ -0,0 +1,14 @@
+[info]
+name = Fast print
+order = 0
+
+[profile]
+layer_height = 0.15
+wall_thickness = 1
+fill_density = 10
+bottom_layer_speed = 30
+infill_speed = 100
+solidarea_speed = 30
+inset0_speed = 40
+insetx_speed = 80
+cool_min_layer_time = 3
diff --git a/resources/quickprint/ultimaker2go/PLA/Normal/profile.ini b/resources/quickprint/ultimaker2go/PLA/Normal/profile.ini
new file mode 100644
index 00000000..162cfaf2
--- /dev/null
+++ b/resources/quickprint/ultimaker2go/PLA/Normal/profile.ini
@@ -0,0 +1,12 @@
+[info]
+name = Normal print
+order = 1
+default = 1
+
+[profile]
+layer_height = 0.1
+infill_speed = 80
+solidarea_speed = 15
+inset0_speed = 30
+insetx_speed = 60
+
diff --git a/resources/quickprint/ultimaker2go/PLA/Ulti/profile.ini b/resources/quickprint/ultimaker2go/PLA/Ulti/profile.ini
new file mode 100644
index 00000000..caa5b0ab
--- /dev/null
+++ b/resources/quickprint/ultimaker2go/PLA/Ulti/profile.ini
@@ -0,0 +1,11 @@
+[info]
+name = Ulti quality
+order = 3
+
+[profile]
+layer_height = 0.04
+infill_speed = 80
+solidarea_speed = 15
+inset0_speed = 30
+insetx_speed = 60
+
diff --git a/resources/quickprint/ultimaker2go/PLA/profile.ini b/resources/quickprint/ultimaker2go/PLA/profile.ini
new file mode 100644
index 00000000..36815aed
--- /dev/null
+++ b/resources/quickprint/ultimaker2go/PLA/profile.ini
@@ -0,0 +1,6 @@
+[info]
+name = PLA
+order = 0
+always_visible = False
+
+[profile]