From: nickthetait Date: Mon, 14 Sep 2015 13:08:51 +0000 (-0600) Subject: Remove laywood profile for just 0.35mm nozzle size X-Git-Tag: lulzbot-17.04~9 X-Git-Url: http://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?a=commitdiff_plain;h=a59359db6909e9057d00b29a6c1471e485421207;p=cura.git Remove laywood profile for just 0.35mm nozzle size Large wood particles in this filament are known to cause clogging issues for a nozzle this small. Prints typically fail after an hour or so. --- diff --git a/resources/quickprint/lulzbot_TAZ_4_035nozzle/Laywood/material.ini b/resources/quickprint/lulzbot_TAZ_4_035nozzle/Laywood/material.ini deleted file mode 100644 index 2feb151b..00000000 --- a/resources/quickprint/lulzbot_TAZ_4_035nozzle/Laywood/material.ini +++ /dev/null @@ -1,5 +0,0 @@ -[info] -name = Laywoo-D3 (CC-Products) -material_types = Advanced -order = 52 -url = www.lulzbot.com/products/laywoo-d3-cherry-laywood-3mm-250g-coil-cc-products diff --git a/resources/quickprint/lulzbot_TAZ_4_035nozzle/Laywood/medium-quality/profile.ini b/resources/quickprint/lulzbot_TAZ_4_035nozzle/Laywood/medium-quality/profile.ini deleted file mode 100644 index 80be71d8..00000000 --- a/resources/quickprint/lulzbot_TAZ_4_035nozzle/Laywood/medium-quality/profile.ini +++ /dev/null @@ -1,4 +0,0 @@ -[info] -name = Standard -order = 0 -profile_file = ../../../lulzbot_profiles/TAZ_single_extruder_0.35nozzle/laywood_medium-quality_TAZ_single-extruder_0.35noz_cura.ini diff --git a/resources/quickprint/lulzbot_TAZ_4_SingleV1/Laywood/material.ini b/resources/quickprint/lulzbot_TAZ_4_SingleV1/Laywood/material.ini deleted file mode 100644 index 2feb151b..00000000 --- a/resources/quickprint/lulzbot_TAZ_4_SingleV1/Laywood/material.ini +++ /dev/null @@ -1,5 +0,0 @@ -[info] -name = Laywoo-D3 (CC-Products) -material_types = Advanced -order = 52 -url = www.lulzbot.com/products/laywoo-d3-cherry-laywood-3mm-250g-coil-cc-products diff --git a/resources/quickprint/lulzbot_TAZ_4_SingleV1/Laywood/medium-quality/profile.ini b/resources/quickprint/lulzbot_TAZ_4_SingleV1/Laywood/medium-quality/profile.ini deleted file mode 100644 index 80be71d8..00000000 --- a/resources/quickprint/lulzbot_TAZ_4_SingleV1/Laywood/medium-quality/profile.ini +++ /dev/null @@ -1,4 +0,0 @@ -[info] -name = Standard -order = 0 -profile_file = ../../../lulzbot_profiles/TAZ_single_extruder_0.35nozzle/laywood_medium-quality_TAZ_single-extruder_0.35noz_cura.ini diff --git a/resources/quickprint/lulzbot_TAZ_5_035nozzle/Laywood/material.ini b/resources/quickprint/lulzbot_TAZ_5_035nozzle/Laywood/material.ini deleted file mode 100644 index 2feb151b..00000000 --- a/resources/quickprint/lulzbot_TAZ_5_035nozzle/Laywood/material.ini +++ /dev/null @@ -1,5 +0,0 @@ -[info] -name = Laywoo-D3 (CC-Products) -material_types = Advanced -order = 52 -url = www.lulzbot.com/products/laywoo-d3-cherry-laywood-3mm-250g-coil-cc-products diff --git a/resources/quickprint/lulzbot_TAZ_5_035nozzle/Laywood/medium-quality/profile.ini b/resources/quickprint/lulzbot_TAZ_5_035nozzle/Laywood/medium-quality/profile.ini deleted file mode 100644 index 80be71d8..00000000 --- a/resources/quickprint/lulzbot_TAZ_5_035nozzle/Laywood/medium-quality/profile.ini +++ /dev/null @@ -1,4 +0,0 @@ -[info] -name = Standard -order = 0 -profile_file = ../../../lulzbot_profiles/TAZ_single_extruder_0.35nozzle/laywood_medium-quality_TAZ_single-extruder_0.35noz_cura.ini diff --git a/resources/quickprint/lulzbot_TAZ_5_SingleV1/Laywood/material.ini b/resources/quickprint/lulzbot_TAZ_5_SingleV1/Laywood/material.ini deleted file mode 100644 index 2feb151b..00000000 --- a/resources/quickprint/lulzbot_TAZ_5_SingleV1/Laywood/material.ini +++ /dev/null @@ -1,5 +0,0 @@ -[info] -name = Laywoo-D3 (CC-Products) -material_types = Advanced -order = 52 -url = www.lulzbot.com/products/laywoo-d3-cherry-laywood-3mm-250g-coil-cc-products diff --git a/resources/quickprint/lulzbot_TAZ_5_SingleV1/Laywood/medium-quality/profile.ini b/resources/quickprint/lulzbot_TAZ_5_SingleV1/Laywood/medium-quality/profile.ini deleted file mode 100644 index 80be71d8..00000000 --- a/resources/quickprint/lulzbot_TAZ_5_SingleV1/Laywood/medium-quality/profile.ini +++ /dev/null @@ -1,4 +0,0 @@ -[info] -name = Standard -order = 0 -profile_file = ../../../lulzbot_profiles/TAZ_single_extruder_0.35nozzle/laywood_medium-quality_TAZ_single-extruder_0.35noz_cura.ini diff --git a/resources/quickprint/lulzbot_profiles/TAZ_single_extruder_0.35nozzle/laywood_medium-quality_TAZ_single-extruder_0.35noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ_single_extruder_0.35nozzle/laywood_medium-quality_TAZ_single-extruder_0.35noz_cura.ini deleted file mode 100644 index 9dc84a02..00000000 --- a/resources/quickprint/lulzbot_profiles/TAZ_single_extruder_0.35nozzle/laywood_medium-quality_TAZ_single-extruder_0.35noz_cura.ini +++ /dev/null @@ -1,255 +0,0 @@ -[profile] -layer_height = .21 -wall_thickness = 1.05 -retraction_enable = True -solid_layer_thickness = .84 -fill_density = 20 -nozzle_size = .35 -print_speed = 50 -print_temperature = 0 -print_temperature2 = 0 -print_temperature3 = 0 -print_temperature4 = 0 -print_bed_temperature = 0 -support = None -platform_adhesion = None -support_dual_extrusion = Both -wipe_tower = False -wipe_tower_volume = 15 -ooze_shield = False -filament_diameter = 2.85 -filament_diameter2 = 0 -filament_diameter3 = 0 -filament_diameter4 = 0 -filament_flow = 100.0 -retraction_speed = 10 -retraction_amount = 1.5 -retraction_dual_amount = 16.5 -retraction_min_travel = 0.5 -retraction_combing = All -retraction_minimal_extrusion = 0.005 -retraction_hop = 0.1 -bottom_thickness = .3 -layer0_width_factor = 125 -object_sink = 0.0 -overlap_dual = 0.15 -travel_speed = 175 -bottom_layer_speed = 15 -infill_speed = 60 -solidarea_speed = 50 -inset0_speed = 50 -insetx_speed = 55 -cool_min_layer_time = 15 -fan_enabled = True -skirt_line_count = 1 -skirt_gap = 3.0 -skirt_minimal_length = 250 -fan_full_height = 0.5 -fan_speed = 75 -fan_speed_max = 100 -cool_min_feedrate = 10 -cool_head_lift = False -solid_top = True -solid_bottom = True -fill_overlap = 15 -support_type = Lines -support_angle = 45 -support_fill_rate = 30 -support_xy_distance = 0.7 -support_z_distance = 0.05 -spiralize = False -simple_mode = False -brim_line_count = 10 -raft_margin = 5.0 -raft_line_spacing = 3.0 -raft_base_thickness = 0.3 -raft_base_linewidth = 1.0 -raft_interface_thickness = 0.27 -raft_interface_linewidth = 0.4 -raft_airgap = 0.35 -raft_surface_layers = 2 -fix_horrible_union_all_type_a = True -fix_horrible_union_all_type_b = False -fix_horrible_use_open_bits = False -fix_horrible_extensive_stitching = False -plugin_config = -object_center_x = -1 -object_center_y = -1 - -[alterations] -start.gcode = ;Sliced at: {day} {date} {time} - ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} - ;Print time: {print_time} - ;Filament used: {filament_amount}m {filament_weight}g - ;Filament cost: {filament_cost} - ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line - ;M109 S{print_temperature} ;Uncomment to add your own temperature line - G21 ;metric values - G90 ;absolute positioning - M82 ;set extruder to absolute mode - M107 ;start with the fan off - G28 X0 Y0 ;move X/Y to min endstops - G28 Z0 ;move Z to min endstops - G1 Z15.0 F{travel_speed};move the platform down 15mm - G92 E0 ; zero the extruded length - G1 F200 E0 ; extrude 3mm of feed stock - G92 E0 ; zero the extruded length again - G1 F{travel_speed} ; set travel speed - M203 X192 Y208 Z3 ; speed limits - M117 Printing... ; send message to LCD -end.gcode = M400 - M104 S0 ; hotend off - M140 S0 ; heated bed heater off (if you have it) - M107 ; fans off - G91 ; relative positioning - G1 E-1 F300 ; retract the filament a bit before lifting the nozzle, to release some of the pressure - G1 Z+0.5 E-5 X-20 Y-20 F3000 ; move Z up a bit and retract filament even more - G90 ; absolute positioning - G1 X0 Y250 ; move to cooling position - M84 ; steppers off - G90 ; absolute positioning - M117 TAZ Ready. - ;{profile_string} -start2.gcode = ;Sliced at: {day} {date} {time} - ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} - ;Print time: {print_time} - ;Filament used: {filament_amount}m {filament_weight}g - ;Filament cost: {filament_cost} - ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line - ;M104 S{print_temperature} ;Uncomment to add your own temperature line - ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line - ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line - G21 ;metric values - G90 ;absolute positioning - M107 ;start with the fan off - G28 X0 Y0 ;move X/Y to min endstops - G28 Z0 ;move Z to min endstops - G1 Z15.0 F{travel_speed} ;move the platform down 15mm - T1 ;Switch to the 2nd extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T0 ;Switch to the first extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F{travel_speed} - ;Put printing message on LCD screen - M117 Printing... -end2.gcode = ;End GCode - M104 T0 S0 ;extruder heater off - M104 T1 S0 ;extruder heater off - M140 S0 ;heated bed heater off (if you have it) - G91 ;relative positioning - G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure - G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more - G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way - M84 ;steppers off - G90 ;absolute positioning - ;{profile_string} -start3.gcode = ;Sliced at: {day} {date} {time} - ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} - ;Print time: {print_time} - ;Filament used: {filament_amount}m {filament_weight}g - ;Filament cost: {filament_cost} - ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line - ;M104 S{print_temperature} ;Uncomment to add your own temperature line - ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line - ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line - G21 ;metric values - G90 ;absolute positioning - M107 ;start with the fan off - G28 X0 Y0 ;move X/Y to min endstops - G28 Z0 ;move Z to min endstops - G1 Z15.0 F{travel_speed} ;move the platform down 15mm - T2 ;Switch to the 2nd extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T1 ;Switch to the 2nd extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T0 ;Switch to the first extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F{travel_speed} - ;Put printing message on LCD screen - M117 Printing... -end3.gcode = ;End GCode - M104 T0 S0 ;extruder heater off - M104 T1 S0 ;extruder heater off - M104 T2 S0 ;extruder heater off - M140 S0 ;heated bed heater off (if you have it) - G91 ;relative positioning - G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure - G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more - G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way - M84 ;steppers off - G90 ;absolute positioning - ;{profile_string} -start4.gcode = ;Sliced at: {day} {date} {time} - ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} - ;Print time: {print_time} - ;Filament used: {filament_amount}m {filament_weight}g - ;Filament cost: {filament_cost} - ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line - ;M104 S{print_temperature} ;Uncomment to add your own temperature line - ;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line - ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line - ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line - G21 ;metric values - G90 ;absolute positioning - M107 ;start with the fan off - G28 X0 Y0 ;move X/Y to min endstops - G28 Z0 ;move Z to min endstops - G1 Z15.0 F{travel_speed} ;move the platform down 15mm - T3 ;Switch to the 4th extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T2 ;Switch to the 3th extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T1 ;Switch to the 2nd extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T0 ;Switch to the first extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F{travel_speed} - ;Put printing message on LCD screen - M117 Printing... -end4.gcode = ;End GCode - M104 T0 S0 ;extruder heater off - M104 T1 S0 ;extruder heater off - M104 T2 S0 ;extruder heater off - M104 T3 S0 ;extruder heater off - M140 S0 ;heated bed heater off (if you have it) - G91 ;relative positioning - G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure - G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more - G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way - M84 ;steppers off - G90 ;absolute positioning - ;{profile_string} -support_start.gcode = -support_end.gcode = -cool_start.gcode = -cool_end.gcode = -replace.csv = -preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders. - ;This code is added before the T(n) -postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders. - ;This code is added after the T(n) -