From: Ian Jackson <ijackson@chiark.greenend.org.uk>
Date: Mon, 21 Apr 2025 10:55:22 +0000 (+0100)
Subject: toolbox-inserts: WellSurround: wip screws
X-Git-Url: http://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?a=commitdiff_plain;h=9a5e8046441d8ae7ed7aff792157ab3df962e9dc;p=reprap-play.git

toolbox-inserts: WellSurround: wip screws

Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
---

diff --git a/toolbox-inserts.scad b/toolbox-inserts.scad
index 2cdc6c3..354260f 100644
--- a/toolbox-inserts.scad
+++ b/toolbox-inserts.scad
@@ -10,7 +10,11 @@ box_edge_z_hindent = 0.5;
 box_edge_width = 10;
 
 below_plane_z = 4.5;
+
 fixing_pitch = 10;
+screw_depth = 6;
+
+fixing_receptacle_d = 4 + 2.5 + 2.5;
 
 well_surround_wall = 2.5;
 well_stiffening_height = 5;
@@ -45,7 +49,8 @@ module WallMinkowskiSphere(wall=well_surround_wall) { ////toplevel
 //
 // ScrewItem should use $depth
 module AtScrewPositions(screws) {
-  for (screw = hull_group) {
+  for (screw = screws) {
+echo("SCREW", screw);
     $screw_depth = is_undef(screw[2]) ? screw_depth : screw[2];
     translate(fixing_pitch * [screw[0], screw[1], 0])
       children(0);
@@ -77,30 +82,35 @@ module WellSurround(
 //    minkowski(){
 //      WallMinkowskiSphere(wall);
 
-    translate(concat(offset, [0])) difference(){
+    difference(){
       union(){
-	linextr(-10, half_height){
+	translate(concat(offset, [0])) linextr(-10, half_height){
 	  offset($fn=8, r = wall)
 	    projection(cut=false)
 	    children(0);
 	}
 
 	for (hull_group = screws) {
+ echo("HULL GROUP", hull_group);
 	  hull() {
-	    AtScrewPositions(screws) {
+	    AtScrewPositions(hull_group) {
+	      linextr(0, $screw_depth)
+		circle(r= fixing_receptacle_d/2);
 	    }
 	  }
+	  AtScrewPositions(hull_group)
+	    %linextr(0, 30) circle(r= 0.5, $fn=4);
 	}
       }
 
 //	minkowski(){
 //	  WallMinkowskiSphere(wall);
-      translate([0, 0, half_height]) {
+      translate(concat(offset, [0])) translate([0, 0, half_height]) {
 	children(0);
       }
 //	}
 
-      for (gap=gaps) {
+      translate(concat(offset, [0])) for (gap=gaps) {
 	linextr_x_yz(gap[0], gap[1])
 	  rectfromto([ -100, well_stiffening_height ], [ 100,100 ]);
       }
@@ -114,7 +124,9 @@ module DriverHandleHolder() { ////toplevel
   WellSurround(driver_handle_handle_d/2, [
     [ 15, driver_handle_shaft_l - 15 ],
     [ driver_handle_shaft_l + 15, driver_handle_shaft_l + 45 ],
-  ], [], offset=[-5, 0])
+  ], [ 
+    [ [0,0] ],
+  ], offset=[-5, 0])
     DriverHandlePositive();
 }