From: nickthetait Date: Wed, 28 Oct 2015 16:16:13 +0000 (-0600) Subject: Add 5 new Colorfabb profiles into quickprint X-Git-Tag: lulzbot-17.12~2 X-Git-Url: http://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?a=commitdiff_plain;h=76995a199096fefbf2aff35ece139c161b2ca1ab;p=cura.git Add 5 new Colorfabb profiles into quickprint --- diff --git a/resources/quickprint/lulzbot_TAZ_4_035nozzle/PCTPE/material.ini b/resources/quickprint/lulzbot_TAZ_4_035nozzle/PCTPE/material.ini index ed2c73df..1ff5b587 100644 --- a/resources/quickprint/lulzbot_TAZ_4_035nozzle/PCTPE/material.ini +++ b/resources/quickprint/lulzbot_TAZ_4_035nozzle/PCTPE/material.ini @@ -1,7 +1,7 @@ [info] name = PCTPE (Taulman) material_types = Advanced -order = 54 +order = 55 description = Bed preparation required: Apply a PVA-based glue stick to bed surface before printing. diff --git a/resources/quickprint/lulzbot_TAZ_4_035nozzle/T-Glase/material.ini b/resources/quickprint/lulzbot_TAZ_4_035nozzle/T-Glase/material.ini index e7e461bf..4f01c9e5 100644 --- a/resources/quickprint/lulzbot_TAZ_4_035nozzle/T-Glase/material.ini +++ b/resources/quickprint/lulzbot_TAZ_4_035nozzle/T-Glase/material.ini @@ -1,7 +1,7 @@ [info] name = t-glase (Taulman) material_types = Advanced -order = 56 +order = 57 description = Bed preparation required: Apply a PVA-based glue stick to bed surface before printing. diff --git a/resources/quickprint/lulzbot_TAZ_4_035nozzle/XT/high-quality/profile.ini b/resources/quickprint/lulzbot_TAZ_4_035nozzle/XT/high-quality/profile.ini new file mode 100644 index 00000000..e811a62a --- /dev/null +++ b/resources/quickprint/lulzbot_TAZ_4_035nozzle/XT/high-quality/profile.ini @@ -0,0 +1,4 @@ +[info] +name = High detail +order = 2 +profile_file = ../../../lulzbot_profiles/TAZ_single_extruder_0.35nozzle/XT_high-quality_TAZ_single-extruder_0.35noz_cura.ini diff --git a/resources/quickprint/lulzbot_TAZ_4_035nozzle/XT/high-speed/profile.ini b/resources/quickprint/lulzbot_TAZ_4_035nozzle/XT/high-speed/profile.ini new file mode 100644 index 00000000..d5eee57a --- /dev/null +++ b/resources/quickprint/lulzbot_TAZ_4_035nozzle/XT/high-speed/profile.ini @@ -0,0 +1,4 @@ +[info] +name = High speed +order = 1 +profile_file = ../../../lulzbot_profiles/TAZ_single_extruder_0.35nozzle/XT_high-speed_TAZ_single-extruder_0.35noz_cura.ini diff --git a/resources/quickprint/lulzbot_TAZ_4_035nozzle/XT/material.ini b/resources/quickprint/lulzbot_TAZ_4_035nozzle/XT/material.ini new file mode 100644 index 00000000..7d094338 --- /dev/null +++ b/resources/quickprint/lulzbot_TAZ_4_035nozzle/XT/material.ini @@ -0,0 +1,7 @@ +[info] +name = XT (Colorfabb) +material_types = Advanced +order = 54 +description = Bed preparation required: + Apply a PVA-based glue stick + to bed surface before printing. diff --git a/resources/quickprint/lulzbot_TAZ_4_035nozzle/XT/medium-quality/profile.ini b/resources/quickprint/lulzbot_TAZ_4_035nozzle/XT/medium-quality/profile.ini new file mode 100644 index 00000000..0008ac7b --- /dev/null +++ b/resources/quickprint/lulzbot_TAZ_4_035nozzle/XT/medium-quality/profile.ini @@ -0,0 +1,4 @@ +[info] +name = Standard +order = 0 +profile_file = ../../../lulzbot_profiles/TAZ_single_extruder_0.35nozzle/XT_medium-quality_TAZ_single-extruder_0.35noz_cura.ini diff --git a/resources/quickprint/lulzbot_TAZ_4_05nozzle/Bamboofill/high-speed/profile.ini b/resources/quickprint/lulzbot_TAZ_4_05nozzle/Bamboofill/high-speed/profile.ini new file mode 100644 index 00000000..7d918a9c --- /dev/null +++ b/resources/quickprint/lulzbot_TAZ_4_05nozzle/Bamboofill/high-speed/profile.ini @@ -0,0 +1,4 @@ +[info] +name = High speed +order = 1 +profile_file = ../../../lulzbot_profiles/TAZ_single_extruder_0.5nozzle/bamboofill_high-speed_TAZ_single-extruder_0.5noz_cura.ini diff --git a/resources/quickprint/lulzbot_TAZ_4_05nozzle/Bamboofill/material.ini b/resources/quickprint/lulzbot_TAZ_4_05nozzle/Bamboofill/material.ini new file mode 100644 index 00000000..235ab648 --- /dev/null +++ b/resources/quickprint/lulzbot_TAZ_4_05nozzle/Bamboofill/material.ini @@ -0,0 +1,4 @@ +[info] +name = Bamboofill (Colorfabb) +material_types = Intermediate +order = 14 diff --git a/resources/quickprint/lulzbot_TAZ_4_05nozzle/PCTPE/material.ini b/resources/quickprint/lulzbot_TAZ_4_05nozzle/PCTPE/material.ini index ed2c73df..1ff5b587 100644 --- a/resources/quickprint/lulzbot_TAZ_4_05nozzle/PCTPE/material.ini +++ b/resources/quickprint/lulzbot_TAZ_4_05nozzle/PCTPE/material.ini @@ -1,7 +1,7 @@ [info] name = PCTPE (Taulman) material_types = Advanced -order = 54 +order = 55 description = Bed preparation required: Apply a PVA-based glue stick to bed surface before printing. diff --git a/resources/quickprint/lulzbot_TAZ_4_05nozzle/T-Glase/material.ini b/resources/quickprint/lulzbot_TAZ_4_05nozzle/T-Glase/material.ini index e7e461bf..4f01c9e5 100644 --- a/resources/quickprint/lulzbot_TAZ_4_05nozzle/T-Glase/material.ini +++ b/resources/quickprint/lulzbot_TAZ_4_05nozzle/T-Glase/material.ini @@ -1,7 +1,7 @@ [info] name = t-glase (Taulman) material_types = Advanced -order = 56 +order = 57 description = Bed preparation required: Apply a PVA-based glue stick to bed surface before printing. diff --git a/resources/quickprint/lulzbot_TAZ_4_05nozzle/XT/high-quality/profile.ini b/resources/quickprint/lulzbot_TAZ_4_05nozzle/XT/high-quality/profile.ini new file mode 100644 index 00000000..0b1c0cf3 --- /dev/null +++ b/resources/quickprint/lulzbot_TAZ_4_05nozzle/XT/high-quality/profile.ini @@ -0,0 +1,4 @@ +[info] +name = High detail +order = 2 +profile_file = ../../../lulzbot_profiles/TAZ_single_extruder_0.5nozzle/XT_high-quality_TAZ_single-extruder_0.5noz_cura.ini diff --git a/resources/quickprint/lulzbot_TAZ_4_05nozzle/XT/high-speed/profile.ini b/resources/quickprint/lulzbot_TAZ_4_05nozzle/XT/high-speed/profile.ini new file mode 100644 index 00000000..62244115 --- /dev/null +++ b/resources/quickprint/lulzbot_TAZ_4_05nozzle/XT/high-speed/profile.ini @@ -0,0 +1,4 @@ +[info] +name = High speed +order = 1 +profile_file = ../../../lulzbot_profiles/TAZ_single_extruder_0.5nozzle/XT_high-speed_TAZ_single-extruder_0.5noz_cura.ini diff --git a/resources/quickprint/lulzbot_TAZ_4_05nozzle/XT/material.ini b/resources/quickprint/lulzbot_TAZ_4_05nozzle/XT/material.ini new file mode 100644 index 00000000..7d094338 --- /dev/null +++ b/resources/quickprint/lulzbot_TAZ_4_05nozzle/XT/material.ini @@ -0,0 +1,7 @@ +[info] +name = XT (Colorfabb) +material_types = Advanced +order = 54 +description = Bed preparation required: + Apply a PVA-based glue stick + to bed surface before printing. diff --git a/resources/quickprint/lulzbot_TAZ_4_05nozzle/XT/medium-quality/profile.ini b/resources/quickprint/lulzbot_TAZ_4_05nozzle/XT/medium-quality/profile.ini new file mode 100644 index 00000000..85393572 --- /dev/null +++ b/resources/quickprint/lulzbot_TAZ_4_05nozzle/XT/medium-quality/profile.ini @@ -0,0 +1,4 @@ +[info] +name = Standard +order = 0 +profile_file = ../../../lulzbot_profiles/TAZ_single_extruder_0.5nozzle/XT_medium-quality_TAZ_single-extruder_0.5noz_cura.ini diff --git a/resources/quickprint/lulzbot_TAZ_4_SingleV1/PCTPE/material.ini b/resources/quickprint/lulzbot_TAZ_4_SingleV1/PCTPE/material.ini index ed2c73df..1ff5b587 100644 --- a/resources/quickprint/lulzbot_TAZ_4_SingleV1/PCTPE/material.ini +++ b/resources/quickprint/lulzbot_TAZ_4_SingleV1/PCTPE/material.ini @@ -1,7 +1,7 @@ [info] name = PCTPE (Taulman) material_types = Advanced -order = 54 +order = 55 description = Bed preparation required: Apply a PVA-based glue stick to bed surface before printing. diff --git a/resources/quickprint/lulzbot_TAZ_4_SingleV1/T-Glase/material.ini b/resources/quickprint/lulzbot_TAZ_4_SingleV1/T-Glase/material.ini index e7e461bf..4f01c9e5 100644 --- a/resources/quickprint/lulzbot_TAZ_4_SingleV1/T-Glase/material.ini +++ b/resources/quickprint/lulzbot_TAZ_4_SingleV1/T-Glase/material.ini @@ -1,7 +1,7 @@ [info] name = t-glase (Taulman) material_types = Advanced -order = 56 +order = 57 description = Bed preparation required: Apply a PVA-based glue stick to bed surface before printing. diff --git a/resources/quickprint/lulzbot_TAZ_4_SingleV1/XT/high-quality/profile.ini b/resources/quickprint/lulzbot_TAZ_4_SingleV1/XT/high-quality/profile.ini new file mode 100644 index 00000000..e811a62a --- /dev/null +++ b/resources/quickprint/lulzbot_TAZ_4_SingleV1/XT/high-quality/profile.ini @@ -0,0 +1,4 @@ +[info] +name = High detail +order = 2 +profile_file = ../../../lulzbot_profiles/TAZ_single_extruder_0.35nozzle/XT_high-quality_TAZ_single-extruder_0.35noz_cura.ini diff --git a/resources/quickprint/lulzbot_TAZ_4_SingleV1/XT/high-speed/profile.ini b/resources/quickprint/lulzbot_TAZ_4_SingleV1/XT/high-speed/profile.ini new file mode 100644 index 00000000..d5eee57a --- /dev/null +++ b/resources/quickprint/lulzbot_TAZ_4_SingleV1/XT/high-speed/profile.ini @@ -0,0 +1,4 @@ +[info] +name = High speed +order = 1 +profile_file = ../../../lulzbot_profiles/TAZ_single_extruder_0.35nozzle/XT_high-speed_TAZ_single-extruder_0.35noz_cura.ini diff --git a/resources/quickprint/lulzbot_TAZ_4_SingleV1/XT/material.ini b/resources/quickprint/lulzbot_TAZ_4_SingleV1/XT/material.ini new file mode 100644 index 00000000..7d094338 --- /dev/null +++ b/resources/quickprint/lulzbot_TAZ_4_SingleV1/XT/material.ini @@ -0,0 +1,7 @@ +[info] +name = XT (Colorfabb) +material_types = Advanced +order = 54 +description = Bed preparation required: + Apply a PVA-based glue stick + to bed surface before printing. diff --git a/resources/quickprint/lulzbot_TAZ_4_SingleV1/XT/medium-quality/profile.ini b/resources/quickprint/lulzbot_TAZ_4_SingleV1/XT/medium-quality/profile.ini new file mode 100644 index 00000000..0008ac7b --- /dev/null +++ b/resources/quickprint/lulzbot_TAZ_4_SingleV1/XT/medium-quality/profile.ini @@ -0,0 +1,4 @@ +[info] +name = Standard +order = 0 +profile_file = ../../../lulzbot_profiles/TAZ_single_extruder_0.35nozzle/XT_medium-quality_TAZ_single-extruder_0.35noz_cura.ini diff --git a/resources/quickprint/lulzbot_TAZ_5_035nozzle/PCTPE/material.ini b/resources/quickprint/lulzbot_TAZ_5_035nozzle/PCTPE/material.ini index ed2c73df..1ff5b587 100644 --- a/resources/quickprint/lulzbot_TAZ_5_035nozzle/PCTPE/material.ini +++ b/resources/quickprint/lulzbot_TAZ_5_035nozzle/PCTPE/material.ini @@ -1,7 +1,7 @@ [info] name = PCTPE (Taulman) material_types = Advanced -order = 54 +order = 55 description = Bed preparation required: Apply a PVA-based glue stick to bed surface before printing. diff --git a/resources/quickprint/lulzbot_TAZ_5_035nozzle/T-Glase/material.ini b/resources/quickprint/lulzbot_TAZ_5_035nozzle/T-Glase/material.ini index e7e461bf..4f01c9e5 100644 --- a/resources/quickprint/lulzbot_TAZ_5_035nozzle/T-Glase/material.ini +++ b/resources/quickprint/lulzbot_TAZ_5_035nozzle/T-Glase/material.ini @@ -1,7 +1,7 @@ [info] name = t-glase (Taulman) material_types = Advanced -order = 56 +order = 57 description = Bed preparation required: Apply a PVA-based glue stick to bed surface before printing. diff --git a/resources/quickprint/lulzbot_TAZ_5_035nozzle/XT/high-quality/profile.ini b/resources/quickprint/lulzbot_TAZ_5_035nozzle/XT/high-quality/profile.ini new file mode 100644 index 00000000..e811a62a --- /dev/null +++ b/resources/quickprint/lulzbot_TAZ_5_035nozzle/XT/high-quality/profile.ini @@ -0,0 +1,4 @@ +[info] +name = High detail +order = 2 +profile_file = ../../../lulzbot_profiles/TAZ_single_extruder_0.35nozzle/XT_high-quality_TAZ_single-extruder_0.35noz_cura.ini diff --git a/resources/quickprint/lulzbot_TAZ_5_035nozzle/XT/high-speed/profile.ini b/resources/quickprint/lulzbot_TAZ_5_035nozzle/XT/high-speed/profile.ini new file mode 100644 index 00000000..d5eee57a --- /dev/null +++ b/resources/quickprint/lulzbot_TAZ_5_035nozzle/XT/high-speed/profile.ini @@ -0,0 +1,4 @@ +[info] +name = High speed +order = 1 +profile_file = ../../../lulzbot_profiles/TAZ_single_extruder_0.35nozzle/XT_high-speed_TAZ_single-extruder_0.35noz_cura.ini diff --git a/resources/quickprint/lulzbot_TAZ_5_035nozzle/XT/material.ini b/resources/quickprint/lulzbot_TAZ_5_035nozzle/XT/material.ini new file mode 100644 index 00000000..7d094338 --- /dev/null +++ b/resources/quickprint/lulzbot_TAZ_5_035nozzle/XT/material.ini @@ -0,0 +1,7 @@ +[info] +name = XT (Colorfabb) +material_types = Advanced +order = 54 +description = Bed preparation required: + Apply a PVA-based glue stick + to bed surface before printing. diff --git a/resources/quickprint/lulzbot_TAZ_5_035nozzle/XT/medium-quality/profile.ini b/resources/quickprint/lulzbot_TAZ_5_035nozzle/XT/medium-quality/profile.ini new file mode 100644 index 00000000..0008ac7b --- /dev/null +++ b/resources/quickprint/lulzbot_TAZ_5_035nozzle/XT/medium-quality/profile.ini @@ -0,0 +1,4 @@ +[info] +name = Standard +order = 0 +profile_file = ../../../lulzbot_profiles/TAZ_single_extruder_0.35nozzle/XT_medium-quality_TAZ_single-extruder_0.35noz_cura.ini diff --git a/resources/quickprint/lulzbot_TAZ_5_05nozzle/Bamboofill/high-speed/profile.ini b/resources/quickprint/lulzbot_TAZ_5_05nozzle/Bamboofill/high-speed/profile.ini new file mode 100644 index 00000000..7d918a9c --- /dev/null +++ b/resources/quickprint/lulzbot_TAZ_5_05nozzle/Bamboofill/high-speed/profile.ini @@ -0,0 +1,4 @@ +[info] +name = High speed +order = 1 +profile_file = ../../../lulzbot_profiles/TAZ_single_extruder_0.5nozzle/bamboofill_high-speed_TAZ_single-extruder_0.5noz_cura.ini diff --git a/resources/quickprint/lulzbot_TAZ_5_05nozzle/Bamboofill/material.ini b/resources/quickprint/lulzbot_TAZ_5_05nozzle/Bamboofill/material.ini new file mode 100644 index 00000000..235ab648 --- /dev/null +++ b/resources/quickprint/lulzbot_TAZ_5_05nozzle/Bamboofill/material.ini @@ -0,0 +1,4 @@ +[info] +name = Bamboofill (Colorfabb) +material_types = Intermediate +order = 14 diff --git a/resources/quickprint/lulzbot_TAZ_5_05nozzle/PCTPE/material.ini b/resources/quickprint/lulzbot_TAZ_5_05nozzle/PCTPE/material.ini index ed2c73df..1ff5b587 100644 --- a/resources/quickprint/lulzbot_TAZ_5_05nozzle/PCTPE/material.ini +++ b/resources/quickprint/lulzbot_TAZ_5_05nozzle/PCTPE/material.ini @@ -1,7 +1,7 @@ [info] name = PCTPE (Taulman) material_types = Advanced -order = 54 +order = 55 description = Bed preparation required: Apply a PVA-based glue stick to bed surface before printing. diff --git a/resources/quickprint/lulzbot_TAZ_5_05nozzle/T-Glase/material.ini b/resources/quickprint/lulzbot_TAZ_5_05nozzle/T-Glase/material.ini index e7e461bf..4f01c9e5 100644 --- a/resources/quickprint/lulzbot_TAZ_5_05nozzle/T-Glase/material.ini +++ b/resources/quickprint/lulzbot_TAZ_5_05nozzle/T-Glase/material.ini @@ -1,7 +1,7 @@ [info] name = t-glase (Taulman) material_types = Advanced -order = 56 +order = 57 description = Bed preparation required: Apply a PVA-based glue stick to bed surface before printing. diff --git a/resources/quickprint/lulzbot_TAZ_5_05nozzle/XT/high-quality/profile.ini b/resources/quickprint/lulzbot_TAZ_5_05nozzle/XT/high-quality/profile.ini new file mode 100644 index 00000000..0b1c0cf3 --- /dev/null +++ b/resources/quickprint/lulzbot_TAZ_5_05nozzle/XT/high-quality/profile.ini @@ -0,0 +1,4 @@ +[info] +name = High detail +order = 2 +profile_file = ../../../lulzbot_profiles/TAZ_single_extruder_0.5nozzle/XT_high-quality_TAZ_single-extruder_0.5noz_cura.ini diff --git a/resources/quickprint/lulzbot_TAZ_5_05nozzle/XT/high-speed/profile.ini b/resources/quickprint/lulzbot_TAZ_5_05nozzle/XT/high-speed/profile.ini new file mode 100644 index 00000000..62244115 --- /dev/null +++ b/resources/quickprint/lulzbot_TAZ_5_05nozzle/XT/high-speed/profile.ini @@ -0,0 +1,4 @@ +[info] +name = High speed +order = 1 +profile_file = ../../../lulzbot_profiles/TAZ_single_extruder_0.5nozzle/XT_high-speed_TAZ_single-extruder_0.5noz_cura.ini diff --git a/resources/quickprint/lulzbot_TAZ_5_05nozzle/XT/material.ini b/resources/quickprint/lulzbot_TAZ_5_05nozzle/XT/material.ini new file mode 100644 index 00000000..7d094338 --- /dev/null +++ b/resources/quickprint/lulzbot_TAZ_5_05nozzle/XT/material.ini @@ -0,0 +1,7 @@ +[info] +name = XT (Colorfabb) +material_types = Advanced +order = 54 +description = Bed preparation required: + Apply a PVA-based glue stick + to bed surface before printing. diff --git a/resources/quickprint/lulzbot_TAZ_5_05nozzle/XT/medium-quality/profile.ini b/resources/quickprint/lulzbot_TAZ_5_05nozzle/XT/medium-quality/profile.ini new file mode 100644 index 00000000..85393572 --- /dev/null +++ b/resources/quickprint/lulzbot_TAZ_5_05nozzle/XT/medium-quality/profile.ini @@ -0,0 +1,4 @@ +[info] +name = Standard +order = 0 +profile_file = ../../../lulzbot_profiles/TAZ_single_extruder_0.5nozzle/XT_medium-quality_TAZ_single-extruder_0.5noz_cura.ini diff --git a/resources/quickprint/lulzbot_TAZ_5_SingleV1/PCTPE/material.ini b/resources/quickprint/lulzbot_TAZ_5_SingleV1/PCTPE/material.ini index ed2c73df..1ff5b587 100644 --- a/resources/quickprint/lulzbot_TAZ_5_SingleV1/PCTPE/material.ini +++ b/resources/quickprint/lulzbot_TAZ_5_SingleV1/PCTPE/material.ini @@ -1,7 +1,7 @@ [info] name = PCTPE (Taulman) material_types = Advanced -order = 54 +order = 55 description = Bed preparation required: Apply a PVA-based glue stick to bed surface before printing. diff --git a/resources/quickprint/lulzbot_TAZ_5_SingleV1/T-Glase/material.ini b/resources/quickprint/lulzbot_TAZ_5_SingleV1/T-Glase/material.ini index e7e461bf..4f01c9e5 100644 --- a/resources/quickprint/lulzbot_TAZ_5_SingleV1/T-Glase/material.ini +++ b/resources/quickprint/lulzbot_TAZ_5_SingleV1/T-Glase/material.ini @@ -1,7 +1,7 @@ [info] name = t-glase (Taulman) material_types = Advanced -order = 56 +order = 57 description = Bed preparation required: Apply a PVA-based glue stick to bed surface before printing. diff --git a/resources/quickprint/lulzbot_TAZ_5_SingleV1/XT/high-quality/profile.ini b/resources/quickprint/lulzbot_TAZ_5_SingleV1/XT/high-quality/profile.ini new file mode 100644 index 00000000..e811a62a --- /dev/null +++ b/resources/quickprint/lulzbot_TAZ_5_SingleV1/XT/high-quality/profile.ini @@ -0,0 +1,4 @@ +[info] +name = High detail +order = 2 +profile_file = ../../../lulzbot_profiles/TAZ_single_extruder_0.35nozzle/XT_high-quality_TAZ_single-extruder_0.35noz_cura.ini diff --git a/resources/quickprint/lulzbot_TAZ_5_SingleV1/XT/high-speed/profile.ini b/resources/quickprint/lulzbot_TAZ_5_SingleV1/XT/high-speed/profile.ini new file mode 100644 index 00000000..d5eee57a --- /dev/null +++ b/resources/quickprint/lulzbot_TAZ_5_SingleV1/XT/high-speed/profile.ini @@ -0,0 +1,4 @@ +[info] +name = High speed +order = 1 +profile_file = ../../../lulzbot_profiles/TAZ_single_extruder_0.35nozzle/XT_high-speed_TAZ_single-extruder_0.35noz_cura.ini diff --git a/resources/quickprint/lulzbot_TAZ_5_SingleV1/XT/material.ini b/resources/quickprint/lulzbot_TAZ_5_SingleV1/XT/material.ini new file mode 100644 index 00000000..7d094338 --- /dev/null +++ b/resources/quickprint/lulzbot_TAZ_5_SingleV1/XT/material.ini @@ -0,0 +1,7 @@ +[info] +name = XT (Colorfabb) +material_types = Advanced +order = 54 +description = Bed preparation required: + Apply a PVA-based glue stick + to bed surface before printing. diff --git a/resources/quickprint/lulzbot_TAZ_5_SingleV1/XT/medium-quality/profile.ini b/resources/quickprint/lulzbot_TAZ_5_SingleV1/XT/medium-quality/profile.ini new file mode 100644 index 00000000..0008ac7b --- /dev/null +++ b/resources/quickprint/lulzbot_TAZ_5_SingleV1/XT/medium-quality/profile.ini @@ -0,0 +1,4 @@ +[info] +name = Standard +order = 0 +profile_file = ../../../lulzbot_profiles/TAZ_single_extruder_0.35nozzle/XT_medium-quality_TAZ_single-extruder_0.35noz_cura.ini diff --git a/resources/quickprint/lulzbot_mini/Bamboofill/high-quality/profile.ini b/resources/quickprint/lulzbot_mini/Bamboofill/high-quality/profile.ini new file mode 100644 index 00000000..b090864b --- /dev/null +++ b/resources/quickprint/lulzbot_mini/Bamboofill/high-quality/profile.ini @@ -0,0 +1,4 @@ +[info] +name = High detail +order = 2 +profile_file = ../../../lulzbot_profiles/Mini_single_extruder_v2/bamboofill_high-quality_Mini_single-extruder-v2_0.5noz_cura.ini diff --git a/resources/quickprint/lulzbot_mini/Bamboofill/material.ini b/resources/quickprint/lulzbot_mini/Bamboofill/material.ini new file mode 100644 index 00000000..235ab648 --- /dev/null +++ b/resources/quickprint/lulzbot_mini/Bamboofill/material.ini @@ -0,0 +1,4 @@ +[info] +name = Bamboofill (Colorfabb) +material_types = Intermediate +order = 14 diff --git a/resources/quickprint/lulzbot_mini/Bamboofill/medium-quality/profile.ini b/resources/quickprint/lulzbot_mini/Bamboofill/medium-quality/profile.ini new file mode 100644 index 00000000..293e68ae --- /dev/null +++ b/resources/quickprint/lulzbot_mini/Bamboofill/medium-quality/profile.ini @@ -0,0 +1,4 @@ +[info] +name = Standard +order = 0 +profile_file = ../../../lulzbot_profiles/Mini_single_extruder_v2/bamboofill_medium-quality_Mini_single-extruder-v2_0.5noz_cura.ini diff --git a/resources/quickprint/lulzbot_mini/Bronzefill/high-speed/profile.ini b/resources/quickprint/lulzbot_mini/Bronzefill/high-speed/profile.ini new file mode 100644 index 00000000..2bd28ede --- /dev/null +++ b/resources/quickprint/lulzbot_mini/Bronzefill/high-speed/profile.ini @@ -0,0 +1,4 @@ +[info] +name = High speed +order = 1 +profile_file = ../../../lulzbot_profiles/Mini_single_extruder_v2/bronzefill_high-speed_Mini_single-extruder-v2_0.5noz_cura.ini diff --git a/resources/quickprint/lulzbot_mini/Bronzefill/material.ini b/resources/quickprint/lulzbot_mini/Bronzefill/material.ini new file mode 100644 index 00000000..97496977 --- /dev/null +++ b/resources/quickprint/lulzbot_mini/Bronzefill/material.ini @@ -0,0 +1,4 @@ +[info] +name = Bronzefill (Colorfabb) +material_types = Advanced +order = 58 diff --git a/resources/quickprint/lulzbot_mini/Copperfill/high-speed/profile.ini b/resources/quickprint/lulzbot_mini/Copperfill/high-speed/profile.ini new file mode 100644 index 00000000..7dc926f2 --- /dev/null +++ b/resources/quickprint/lulzbot_mini/Copperfill/high-speed/profile.ini @@ -0,0 +1,4 @@ +[info] +name = High speed +order = 1 +profile_file = ../../../lulzbot_profiles/Mini_single_extruder_v2/copperfill_high-speed_Mini_single-extruder-v2_0.5noz_cura.ini diff --git a/resources/quickprint/lulzbot_mini/Copperfill/material.ini b/resources/quickprint/lulzbot_mini/Copperfill/material.ini new file mode 100644 index 00000000..c6bd0377 --- /dev/null +++ b/resources/quickprint/lulzbot_mini/Copperfill/material.ini @@ -0,0 +1,4 @@ +[info] +name = Copperfill (Colorfabb) +material_types = Advanced +order = 59 diff --git a/resources/quickprint/lulzbot_mini/PC-ABS/material.ini b/resources/quickprint/lulzbot_mini/PC-ABS/material.ini index 93f49fd6..74135d02 100644 --- a/resources/quickprint/lulzbot_mini/PC-ABS/material.ini +++ b/resources/quickprint/lulzbot_mini/PC-ABS/material.ini @@ -1,7 +1,7 @@ [info] name = PC-ABS (Proto-pasta) material_types = Advanced -order = 55 +order = 56 description = Bed preparation required: Apply a PVA-based glue stick to bed surface before printing. diff --git a/resources/quickprint/lulzbot_mini/PCTPE/material.ini b/resources/quickprint/lulzbot_mini/PCTPE/material.ini index ed2c73df..1ff5b587 100644 --- a/resources/quickprint/lulzbot_mini/PCTPE/material.ini +++ b/resources/quickprint/lulzbot_mini/PCTPE/material.ini @@ -1,7 +1,7 @@ [info] name = PCTPE (Taulman) material_types = Advanced -order = 54 +order = 55 description = Bed preparation required: Apply a PVA-based glue stick to bed surface before printing. diff --git a/resources/quickprint/lulzbot_mini/T-Glase/material.ini b/resources/quickprint/lulzbot_mini/T-Glase/material.ini index e7e461bf..4f01c9e5 100644 --- a/resources/quickprint/lulzbot_mini/T-Glase/material.ini +++ b/resources/quickprint/lulzbot_mini/T-Glase/material.ini @@ -1,7 +1,7 @@ [info] name = t-glase (Taulman) material_types = Advanced -order = 56 +order = 57 description = Bed preparation required: Apply a PVA-based glue stick to bed surface before printing. diff --git a/resources/quickprint/lulzbot_mini/Woodfill/high-quality/profile.ini b/resources/quickprint/lulzbot_mini/Woodfill/high-quality/profile.ini new file mode 100644 index 00000000..60d180f4 --- /dev/null +++ b/resources/quickprint/lulzbot_mini/Woodfill/high-quality/profile.ini @@ -0,0 +1,4 @@ +[info] +name = High detail +order = 2 +profile_file = ../../../lulzbot_profiles/Mini_single_extruder_v2/woodfill_high-quality_Mini_single-extruder-v2_0.5noz_cura.ini diff --git a/resources/quickprint/lulzbot_mini/Woodfill/material.ini b/resources/quickprint/lulzbot_mini/Woodfill/material.ini new file mode 100644 index 00000000..ec418161 --- /dev/null +++ b/resources/quickprint/lulzbot_mini/Woodfill/material.ini @@ -0,0 +1,4 @@ +[info] +name = Woodfill (Colorfabb) +material_types = Intermediate +order = 15 diff --git a/resources/quickprint/lulzbot_mini/XT/high-quality/profile.ini b/resources/quickprint/lulzbot_mini/XT/high-quality/profile.ini new file mode 100644 index 00000000..6675e449 --- /dev/null +++ b/resources/quickprint/lulzbot_mini/XT/high-quality/profile.ini @@ -0,0 +1,4 @@ +[info] +name = High detail +order = 2 +profile_file = ../../../lulzbot_profiles/Mini_single_extruder_v2/XT_high-quality_Mini_single-extruder-v2_0.5noz_cura.ini diff --git a/resources/quickprint/lulzbot_mini/XT/high-speed/profile.ini b/resources/quickprint/lulzbot_mini/XT/high-speed/profile.ini new file mode 100644 index 00000000..70552db2 --- /dev/null +++ b/resources/quickprint/lulzbot_mini/XT/high-speed/profile.ini @@ -0,0 +1,4 @@ +[info] +name = High speed +order = 1 +profile_file = ../../../lulzbot_profiles/Mini_single_extruder_v2/XT_high-speed_Mini_single-extruder-v2_0.5noz_cura.ini diff --git a/resources/quickprint/lulzbot_mini/XT/material.ini b/resources/quickprint/lulzbot_mini/XT/material.ini new file mode 100644 index 00000000..7d094338 --- /dev/null +++ b/resources/quickprint/lulzbot_mini/XT/material.ini @@ -0,0 +1,7 @@ +[info] +name = XT (Colorfabb) +material_types = Advanced +order = 54 +description = Bed preparation required: + Apply a PVA-based glue stick + to bed surface before printing. diff --git a/resources/quickprint/lulzbot_mini/XT/medium-quality/profile.ini b/resources/quickprint/lulzbot_mini/XT/medium-quality/profile.ini new file mode 100644 index 00000000..7bf1a856 --- /dev/null +++ b/resources/quickprint/lulzbot_mini/XT/medium-quality/profile.ini @@ -0,0 +1,4 @@ +[info] +name = Standard +order = 0 +profile_file = ../../../lulzbot_profiles/Mini_single_extruder_v2/XT_medium-quality_Mini_single-extruder-v2_0.5noz_cura.ini diff --git a/resources/quickprint/lulzbot_profiles/Mini_single_extruder_v2/XT_high-quality_Mini_single-extruder-v2_0.5noz_cura.ini b/resources/quickprint/lulzbot_profiles/Mini_single_extruder_v2/XT_high-quality_Mini_single-extruder-v2_0.5noz_cura.ini new file mode 100644 index 00000000..8dbd4831 --- /dev/null +++ b/resources/quickprint/lulzbot_profiles/Mini_single_extruder_v2/XT_high-quality_Mini_single-extruder-v2_0.5noz_cura.ini @@ -0,0 +1,299 @@ +[profile] +layer_height = 0.18 +wall_thickness = 1.0 +retraction_enable = True +solid_layer_thickness = 1.08 +fill_density = 20 +perimeter_before_infill = True +nozzle_size = 0.5 +print_speed = 50 +print_temperature = 230 +print_temperature2 = 0 +print_temperature3 = 0 +print_temperature4 = 0 +print_temperature5 = 0 +print_bed_temperature = 60 +support = None +platform_adhesion = None +support_dual_extrusion = Both +wipe_tower = False +wipe_tower_volume = 15 +ooze_shield = False +filament_diameter = 2.85 +filament_diameter2 = 0 +filament_diameter3 = 0 +filament_diameter4 = 0 +filament_diameter5 = 0 +filament_flow = 100.0 +retraction_speed = 10 +retraction_amount = 1 +retraction_dual_amount = 16.5 +retraction_min_travel = 1.5 +retraction_combing = All +retraction_minimal_extrusion = 0.005 +retraction_hop = 0.1 +bottom_thickness = 0.425 +layer0_width_factor = 125 +object_sink = 0.0 +overlap_dual = 0.15 +travel_speed = 175 +bottom_layer_speed = 8 +infill_speed = 30 +solidarea_speed = 20 +inset0_speed = 20 +insetx_speed = 25 +cool_min_layer_time = 15 +fan_enabled = True +skirt_line_count = 1 +skirt_gap = 3.0 +skirt_minimal_length = 250 +fan_full_height = 0.5 +fan_speed = 75 +fan_speed_max = 100 +cool_min_feedrate = 10 +cool_head_lift = False +solid_top = True +solid_bottom = True +fill_overlap = 15 +support_type = Lines +support_angle = 45 +support_fill_rate = 30 +support_xy_distance = 0.7 +support_z_distance = 0.05 +spiralize = False +simple_mode = False +brim_line_count = 10 +raft_margin = 5.0 +raft_line_spacing = 3.0 +raft_base_thickness = 0.3 +raft_base_linewidth = 1.0 +raft_interface_thickness = 0.27 +raft_interface_linewidth = 0.4 +raft_airgap_all = 0.0 +raft_airgap = 0.5 +raft_surface_layers = 2 +raft_surface_thickness = 0.27 +raft_surface_linewidth = 0.4 +fix_horrible_union_all_type_a = True +fix_horrible_union_all_type_b = False +fix_horrible_use_open_bits = False +fix_horrible_extensive_stitching = False +plugin_config = (lp1 + . +object_center_x = -1 +object_center_y = -1 + +[alterations] +start.gcode = ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} + ;Print time: {print_time} + ;Filament used: {filament_amount}m {filament_weight}g + ;Filament cost: {filament_cost} + ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line + ;M109 S{print_temperature} ;Uncomment to add your own temperature line + G21 ; metric values + G90 ; absolute positioning + M82 ; set extruder to absolute mode + M107 ; start with the fan off + G92 E0 ; set extruder position to 0 + M140 S{print_bed_temperature}; get bed heating up + G28 ; home all + M109 S150 ; set to cleaning temp and wait + G1 Z150 E-30 F75 ; suck up XXmm of filament + M109 S170 ; heat up rest of way + G1 X45 Y174 F11520 ; move behind scraper + G1 Z0 F1200 ; CRITICAL: set Z to height of top of scraper + G1 X45 Y174 Z-.5 F4000 ; wiping ; plunge into wipe pad + G1 X55 Y172 Z-.5 F4000 ; wiping + G1 X45 Y174 Z0 F4000 ; wiping + G1 X55 Y172 F4000 ; wiping + G1 X45 Y174 F4000 ; wiping + G1 X55 Y172 F4000 ; wiping + G1 X45 Y174 F4000 ; wiping + G1 X55 Y172 F4000 ; wiping + G1 X60 Y174 F4000 ; wiping + G1 X80 Y172 F4000 ; wiping + G1 X60 Y174 F4000 ; wiping + G1 X80 Y172 F4000 ; wiping + G1 X60 Y174 F4000 ; wiping + G1 X90 Y172 F4000 ; wiping + G1 X80 Y174 F4000 ; wiping + G1 X100 Y172 F4000 ; wiping + G1 X80 Y174 F4000 ; wiping + G1 X100 Y172 F4000 ; wiping + G1 X80 Y174 F4000 ; wiping + G1 X100 Y172 F4000 ; wiping + G1 X110 Y174 F4000 ; wiping + G1 X100 Y172 F4000 ; wiping + G1 X110 Y174 F4000 ; wiping + G1 X100 Y172 F4000 ; wiping + G1 X110 Y174 F4000 ; wiping + G1 X115 Y172 Z-0.5 F1000 ; wipe slower and bury noz in cleanish area + G1 Z10 ; raise z + G28 X0 Y0 ; home x and y + M109 S170 ; set to probing temp + M204 S300 ; set accel for probing + G29 ; Probe + M204 S2000 ; set accel back to normal + G1 X5 Y15 Z10 F5000 ; get out the way + M400 ; clear buffer + G4 S1 ; pause + M109 S{print_temperature} ; set extruder temp and wait + G4 S25 ; wait for bed to temp up + G1 Z2 E0 F75 ; extrude filament back into nozzle + M140 S{print_bed_temperature}; get bed temping up during first layer +end.gcode = M400 + M104 S0 ; Hotend off + M140 S0 ; heated bed heater off (if you have it) + M107 ; fans off + G92 E0 ; set extruder to 0 + G1 E-3 F300 ; retract a bit to relieve pressure + G1 X5 Y5 Z156 F10000 ; move to cooling positioning + M190 R60 ; wait for bed to cool + M140 S0 ; turn off bed temp + G1 X145 Y175 Z156 F1000 ; move to cooling positioning + M84 ; steppers off + G90 ; absolute positioning + ;{profile_string} +start2.gcode = ;Sliced at: {day} {date} {time} + ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} + ;Print time: {print_time} + ;Filament used: {filament_amount}m {filament_weight}g + ;Filament cost: {filament_cost} + ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line + ;M104 S{print_temperature} ;Uncomment to add your own temperature line + ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line + ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line + G21 ;metric values + G90 ;absolute positioning + M107 ;start with the fan off + G28 X0 Y0 ;move X/Y to min endstops + G28 Z0 ;move Z to min endstops + G1 Z15.0 F{travel_speed} ;move the platform down 15mm + T1 ;Switch to the 2nd extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F200 E-{retraction_dual_amount} + T0 ;Switch to the first extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F{travel_speed} + ;Put printing message on LCD screen + M117 Printing... +end2.gcode = ;End GCode + M104 T0 S0 ;extruder heater off + M104 T1 S0 ;extruder heater off + M140 S0 ;heated bed heater off (if you have it) + G91 ;relative positioning + G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure + G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more + G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way + M84 ;steppers off + G90 ;absolute positioning + ;{profile_string} +start3.gcode = ;Sliced at: {day} {date} {time} + ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} + ;Print time: {print_time} + ;Filament used: {filament_amount}m {filament_weight}g + ;Filament cost: {filament_cost} + ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line + ;M104 S{print_temperature} ;Uncomment to add your own temperature line + ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line + ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line + G21 ;metric values + G90 ;absolute positioning + M107 ;start with the fan off + G28 X0 Y0 ;move X/Y to min endstops + G28 Z0 ;move Z to min endstops + G1 Z15.0 F{travel_speed} ;move the platform down 15mm + T2 ;Switch to the 2nd extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F200 E-{retraction_dual_amount} + T1 ;Switch to the 2nd extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F200 E-{retraction_dual_amount} + T0 ;Switch to the first extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F{travel_speed} + ;Put printing message on LCD screen + M117 Printing... +end3.gcode = ;End GCode + M104 T0 S0 ;extruder heater off + M104 T1 S0 ;extruder heater off + M104 T2 S0 ;extruder heater off + M140 S0 ;heated bed heater off (if you have it) + G91 ;relative positioning + G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure + G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more + G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way + M84 ;steppers off + G90 ;absolute positioning + ;{profile_string} +start4.gcode = ;Sliced at: {day} {date} {time} + ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} + ;Print time: {print_time} + ;Filament used: {filament_amount}m {filament_weight}g + ;Filament cost: {filament_cost} + ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line + ;M104 S{print_temperature} ;Uncomment to add your own temperature line + ;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line + ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line + ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line + G21 ;metric values + G90 ;absolute positioning + M107 ;start with the fan off + G28 X0 Y0 ;move X/Y to min endstops + G28 Z0 ;move Z to min endstops + G1 Z15.0 F{travel_speed} ;move the platform down 15mm + T3 ;Switch to the 4th extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F200 E-{retraction_dual_amount} + T2 ;Switch to the 3th extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F200 E-{retraction_dual_amount} + T1 ;Switch to the 2nd extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F200 E-{retraction_dual_amount} + T0 ;Switch to the first extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F{travel_speed} + ;Put printing message on LCD screen + M117 Printing... +end4.gcode = ;End GCode + M104 T0 S0 ;extruder heater off + M104 T1 S0 ;extruder heater off + M104 T2 S0 ;extruder heater off + M104 T3 S0 ;extruder heater off + M140 S0 ;heated bed heater off (if you have it) + G91 ;relative positioning + G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure + G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more + G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way + M84 ;steppers off + G90 ;absolute positioning + ;{profile_string} +support_start.gcode = +support_end.gcode = +cool_start.gcode = +cool_end.gcode = +replace.csv = +preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders. + ;This code is added before the T(n) +postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders. + ;This code is added after the T(n) + diff --git a/resources/quickprint/lulzbot_profiles/Mini_single_extruder_v2/XT_high-speed_Mini_single-extruder-v2_0.5noz_cura.ini b/resources/quickprint/lulzbot_profiles/Mini_single_extruder_v2/XT_high-speed_Mini_single-extruder-v2_0.5noz_cura.ini new file mode 100644 index 00000000..6c9051ff --- /dev/null +++ b/resources/quickprint/lulzbot_profiles/Mini_single_extruder_v2/XT_high-speed_Mini_single-extruder-v2_0.5noz_cura.ini @@ -0,0 +1,293 @@ +[profile] +layer_height = 0.38 +wall_thickness = 1.0 +retraction_enable = True +solid_layer_thickness = 0.8 +fill_density = 20 +nozzle_size = 0.5 +print_speed = 50 +print_temperature = 240 +print_temperature2 = 0 +print_temperature3 = 0 +print_temperature4 = 0 +print_bed_temperature = 60 +support = None +platform_adhesion = None +support_dual_extrusion = Both +wipe_tower = False +wipe_tower_volume = 15 +ooze_shield = False +filament_diameter = 2.85 +filament_diameter2 = 0 +filament_diameter3 = 0 +filament_diameter4 = 0 +filament_flow = 100.0 +retraction_speed = 10 +retraction_amount = 1 +retraction_dual_amount = 16.5 +retraction_min_travel = 1.5 +retraction_combing = All +retraction_minimal_extrusion = 0.005 +retraction_hop = 0.1 +bottom_thickness = 0.425 +layer0_width_factor = 125 +object_sink = 0.0 +overlap_dual = 0.15 +travel_speed = 175 +bottom_layer_speed = 15 +infill_speed = 60 +solidarea_speed = 50 +inset0_speed = 50 +insetx_speed = 55 +cool_min_layer_time = 15 +fan_enabled = True +skirt_line_count = 1 +skirt_gap = 3.0 +skirt_minimal_length = 250 +fan_full_height = 0.5 +fan_speed = 40 +fan_speed_max = 60 +cool_min_feedrate = 10 +cool_head_lift = False +solid_top = True +solid_bottom = True +fill_overlap = 15 +support_type = Lines +support_angle = 45 +support_fill_rate = 30 +support_xy_distance = 0.7 +support_z_distance = 0.05 +spiralize = False +simple_mode = False +brim_line_count = 10 +raft_margin = 5.0 +raft_line_spacing = 3.0 +raft_base_thickness = 0.3 +raft_base_linewidth = 1.0 +raft_interface_thickness = 0.27 +raft_interface_linewidth = 0.4 +raft_airgap = 0.5 +raft_surface_layers = 2 +fix_horrible_union_all_type_a = True +fix_horrible_union_all_type_b = False +fix_horrible_use_open_bits = False +fix_horrible_extensive_stitching = False +plugin_config = (lp1 + . +object_center_x = -1 +object_center_y = -1 + +[alterations] +start.gcode = ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} + ;Print time: {print_time} + ;Filament used: {filament_amount}m {filament_weight}g + ;Filament cost: {filament_cost} + ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line + ;M109 S{print_temperature} ;Uncomment to add your own temperature line + G21 ; metric values + G90 ; absolute positioning + M82 ; set extruder to absolute mode + M107 ; start with the fan off + G92 E0 ; set extruder position to 0 + M140 S{print_bed_temperature}; get bed heating up + G28 ; home all + M109 S150 ; set to cleaning temp and wait + G1 Z150 E-30 F75 ; suck up XXmm of filament + M109 S170 ; heat up rest of way + G1 X45 Y174 F11520 ; move behind scraper + G1 Z0 F1200 ; CRITICAL: set Z to height of top of scraper + G1 X45 Y174 Z-.5 F4000 ; wiping ; plunge into wipe pad + G1 X55 Y172 Z-.5 F4000 ; wiping + G1 X45 Y174 Z0 F4000 ; wiping + G1 X55 Y172 F4000 ; wiping + G1 X45 Y174 F4000 ; wiping + G1 X55 Y172 F4000 ; wiping + G1 X45 Y174 F4000 ; wiping + G1 X55 Y172 F4000 ; wiping + G1 X60 Y174 F4000 ; wiping + G1 X80 Y172 F4000 ; wiping + G1 X60 Y174 F4000 ; wiping + G1 X80 Y172 F4000 ; wiping + G1 X60 Y174 F4000 ; wiping + G1 X90 Y172 F4000 ; wiping + G1 X80 Y174 F4000 ; wiping + G1 X100 Y172 F4000 ; wiping + G1 X80 Y174 F4000 ; wiping + G1 X100 Y172 F4000 ; wiping + G1 X80 Y174 F4000 ; wiping + G1 X100 Y172 F4000 ; wiping + G1 X110 Y174 F4000 ; wiping + G1 X100 Y172 F4000 ; wiping + G1 X110 Y174 F4000 ; wiping + G1 X100 Y172 F4000 ; wiping + G1 X110 Y174 F4000 ; wiping + G1 X115 Y172 Z-0.5 F1000 ; wipe slower and bury noz in cleanish area + G1 Z10 ; raise z + G28 X0 Y0 ; home x and y + M109 S170 ; set to probing temp + M204 S300 ; set accel for probing + G29 ; Probe + M204 S2000 ; set accel back to normal + G1 X5 Y15 Z10 F5000 ; get out the way + M400 ; clear buffer + G4 S1 ; pause + M109 S{print_temperature} ; set extruder temp and wait + G4 S25 ; wait for bed to temp up + G1 Z2 E0 F75 ; extrude filament back into nozzle + M140 S{print_bed_temperature}; get bed temping up during first layer +end.gcode = M400 + M104 S0 ; Hotend off + M140 S0 ; heated bed heater off (if you have it) + M107 ; fans off + G92 E0 ; set extruder to 0 + G1 E-3 F300 ; retract a bit to relieve pressure + G1 X5 Y5 Z156 F10000 ; move to cooling positioning + M190 R60 ; wait for bed to cool + M140 S0 ; turn off bed temp + G1 X145 Y175 Z156 F1000 ; move to cooling positioning + M84 ; steppers off + G90 ; absolute positioning + ;{profile_string} +start2.gcode = ;Sliced at: {day} {date} {time} + ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} + ;Print time: {print_time} + ;Filament used: {filament_amount}m {filament_weight}g + ;Filament cost: {filament_cost} + ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line + ;M104 S{print_temperature} ;Uncomment to add your own temperature line + ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line + ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line + G21 ;metric values + G90 ;absolute positioning + M107 ;start with the fan off + G28 X0 Y0 ;move X/Y to min endstops + G28 Z0 ;move Z to min endstops + G1 Z15.0 F{travel_speed} ;move the platform down 15mm + T1 ;Switch to the 2nd extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F200 E-{retraction_dual_amount} + T0 ;Switch to the first extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F{travel_speed} + ;Put printing message on LCD screen + M117 Printing... +end2.gcode = ;End GCode + M104 T0 S0 ;extruder heater off + M104 T1 S0 ;extruder heater off + M140 S0 ;heated bed heater off (if you have it) + G91 ;relative positioning + G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure + G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more + G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way + M84 ;steppers off + G90 ;absolute positioning + ;{profile_string} +start3.gcode = ;Sliced at: {day} {date} {time} + ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} + ;Print time: {print_time} + ;Filament used: {filament_amount}m {filament_weight}g + ;Filament cost: {filament_cost} + ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line + ;M104 S{print_temperature} ;Uncomment to add your own temperature line + ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line + ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line + G21 ;metric values + G90 ;absolute positioning + M107 ;start with the fan off + G28 X0 Y0 ;move X/Y to min endstops + G28 Z0 ;move Z to min endstops + G1 Z15.0 F{travel_speed} ;move the platform down 15mm + T2 ;Switch to the 2nd extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F200 E-{retraction_dual_amount} + T1 ;Switch to the 2nd extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F200 E-{retraction_dual_amount} + T0 ;Switch to the first extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F{travel_speed} + ;Put printing message on LCD screen + M117 Printing... +end3.gcode = ;End GCode + M104 T0 S0 ;extruder heater off + M104 T1 S0 ;extruder heater off + M104 T2 S0 ;extruder heater off + M140 S0 ;heated bed heater off (if you have it) + G91 ;relative positioning + G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure + G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more + G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way + M84 ;steppers off + G90 ;absolute positioning + ;{profile_string} +start4.gcode = ;Sliced at: {day} {date} {time} + ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} + ;Print time: {print_time} + ;Filament used: {filament_amount}m {filament_weight}g + ;Filament cost: {filament_cost} + ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line + ;M104 S{print_temperature} ;Uncomment to add your own temperature line + ;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line + ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line + ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line + G21 ;metric values + G90 ;absolute positioning + M107 ;start with the fan off + G28 X0 Y0 ;move X/Y to min endstops + G28 Z0 ;move Z to min endstops + G1 Z15.0 F{travel_speed} ;move the platform down 15mm + T3 ;Switch to the 4th extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F200 E-{retraction_dual_amount} + T2 ;Switch to the 3th extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F200 E-{retraction_dual_amount} + T1 ;Switch to the 2nd extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F200 E-{retraction_dual_amount} + T0 ;Switch to the first extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F{travel_speed} + ;Put printing message on LCD screen + M117 Printing... +end4.gcode = ;End GCode + M104 T0 S0 ;extruder heater off + M104 T1 S0 ;extruder heater off + M104 T2 S0 ;extruder heater off + M104 T3 S0 ;extruder heater off + M140 S0 ;heated bed heater off (if you have it) + G91 ;relative positioning + G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure + G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more + G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way + M84 ;steppers off + G90 ;absolute positioning + ;{profile_string} +support_start.gcode = +support_end.gcode = +cool_start.gcode = +cool_end.gcode = +replace.csv = +preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders. + ;This code is added before the T(n) +postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders. + ;This code is added after the T(n) + diff --git a/resources/quickprint/lulzbot_profiles/Mini_single_extruder_v2/XT_medium-quality_Mini_single-extruder-v2_0.5noz_cura.ini b/resources/quickprint/lulzbot_profiles/Mini_single_extruder_v2/XT_medium-quality_Mini_single-extruder-v2_0.5noz_cura.ini new file mode 100644 index 00000000..01c3df6f --- /dev/null +++ b/resources/quickprint/lulzbot_profiles/Mini_single_extruder_v2/XT_medium-quality_Mini_single-extruder-v2_0.5noz_cura.ini @@ -0,0 +1,293 @@ +[profile] +layer_height = 0.25 +wall_thickness = 1.0 +retraction_enable = True +solid_layer_thickness = 0.8 +fill_density = 20 +nozzle_size = 0.5 +print_speed = 50 +print_temperature = 235 +print_temperature2 = 0 +print_temperature3 = 0 +print_temperature4 = 0 +print_bed_temperature = 60 +support = None +platform_adhesion = None +support_dual_extrusion = Both +wipe_tower = False +wipe_tower_volume = 15 +ooze_shield = False +filament_diameter = 2.85 +filament_diameter2 = 0 +filament_diameter3 = 0 +filament_diameter4 = 0 +filament_flow = 100.0 +retraction_speed = 10 +retraction_amount = 1 +retraction_dual_amount = 16.5 +retraction_min_travel = 1.5 +retraction_combing = All +retraction_minimal_extrusion = 0.005 +retraction_hop = 0.1 +bottom_thickness = 0.425 +layer0_width_factor = 125 +object_sink = 0.0 +overlap_dual = 0.15 +travel_speed = 175 +bottom_layer_speed = 10 +infill_speed = 40 +solidarea_speed = 35 +inset0_speed = 35 +insetx_speed = 37 +cool_min_layer_time = 15 +fan_enabled = True +skirt_line_count = 1 +skirt_gap = 3.0 +skirt_minimal_length = 250 +fan_full_height = 0.5 +fan_speed = 40 +fan_speed_max = 60 +cool_min_feedrate = 10 +cool_head_lift = False +solid_top = True +solid_bottom = True +fill_overlap = 15 +support_type = Lines +support_angle = 45 +support_fill_rate = 30 +support_xy_distance = 0.7 +support_z_distance = 0.05 +spiralize = False +simple_mode = False +brim_line_count = 10 +raft_margin = 5.0 +raft_line_spacing = 3.0 +raft_base_thickness = 0.3 +raft_base_linewidth = 1.0 +raft_interface_thickness = 0.27 +raft_interface_linewidth = 0.4 +raft_airgap = 0.5 +raft_surface_layers = 2 +fix_horrible_union_all_type_a = True +fix_horrible_union_all_type_b = False +fix_horrible_use_open_bits = False +fix_horrible_extensive_stitching = False +plugin_config = (lp1 + . +object_center_x = -1 +object_center_y = -1 + +[alterations] +start.gcode = ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} + ;Print time: {print_time} + ;Filament used: {filament_amount}m {filament_weight}g + ;Filament cost: {filament_cost} + ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line + ;M109 S{print_temperature} ;Uncomment to add your own temperature line + G21 ; metric values + G90 ; absolute positioning + M82 ; set extruder to absolute mode + M107 ; start with the fan off + G92 E0 ; set extruder position to 0 + M140 S{print_bed_temperature}; get bed heating up + G28 ; home all + M109 S150 ; set to cleaning temp and wait + G1 Z150 E-30 F75 ; suck up XXmm of filament + M109 S170 ; heat up rest of way + G1 X45 Y174 F11520 ; move behind scraper + G1 Z0 F1200 ; CRITICAL: set Z to height of top of scraper + G1 X45 Y174 Z-.5 F4000 ; wiping ; plunge into wipe pad + G1 X55 Y172 Z-.5 F4000 ; wiping + G1 X45 Y174 Z0 F4000 ; wiping + G1 X55 Y172 F4000 ; wiping + G1 X45 Y174 F4000 ; wiping + G1 X55 Y172 F4000 ; wiping + G1 X45 Y174 F4000 ; wiping + G1 X55 Y172 F4000 ; wiping + G1 X60 Y174 F4000 ; wiping + G1 X80 Y172 F4000 ; wiping + G1 X60 Y174 F4000 ; wiping + G1 X80 Y172 F4000 ; wiping + G1 X60 Y174 F4000 ; wiping + G1 X90 Y172 F4000 ; wiping + G1 X80 Y174 F4000 ; wiping + G1 X100 Y172 F4000 ; wiping + G1 X80 Y174 F4000 ; wiping + G1 X100 Y172 F4000 ; wiping + G1 X80 Y174 F4000 ; wiping + G1 X100 Y172 F4000 ; wiping + G1 X110 Y174 F4000 ; wiping + G1 X100 Y172 F4000 ; wiping + G1 X110 Y174 F4000 ; wiping + G1 X100 Y172 F4000 ; wiping + G1 X110 Y174 F4000 ; wiping + G1 X115 Y172 Z-0.5 F1000 ; wipe slower and bury noz in cleanish area + G1 Z10 ; raise z + G28 X0 Y0 ; home x and y + M109 S170 ; set to probing temp + M204 S300 ; set accel for probing + G29 ; Probe + M204 S2000 ; set accel back to normal + G1 X5 Y15 Z10 F5000 ; get out the way + M400 ; clear buffer + G4 S1 ; pause + M109 S{print_temperature} ; set extruder temp and wait + G4 S25 ; wait for bed to temp up + G1 Z2 E0 F75 ; extrude filament back into nozzle + M140 S{print_bed_temperature}; get bed temping up during first layer +end.gcode = M400 + M104 S0 ; Hotend off + M140 S0 ; heated bed heater off (if you have it) + M107 ; fans off + G92 E0 ; set extruder to 0 + G1 E-3 F300 ; retract a bit to relieve pressure + G1 X5 Y5 Z156 F10000 ; move to cooling positioning + M190 R60 ; wait for bed to cool + M140 S0 ; turn off bed temp + G1 X145 Y175 Z156 F1000 ; move to cooling positioning + M84 ; steppers off + G90 ; absolute positioning + ;{profile_string} +start2.gcode = ;Sliced at: {day} {date} {time} + ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} + ;Print time: {print_time} + ;Filament used: {filament_amount}m {filament_weight}g + ;Filament cost: {filament_cost} + ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line + ;M104 S{print_temperature} ;Uncomment to add your own temperature line + ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line + ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line + G21 ;metric values + G90 ;absolute positioning + M107 ;start with the fan off + G28 X0 Y0 ;move X/Y to min endstops + G28 Z0 ;move Z to min endstops + G1 Z15.0 F{travel_speed} ;move the platform down 15mm + T1 ;Switch to the 2nd extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F200 E-{retraction_dual_amount} + T0 ;Switch to the first extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F{travel_speed} + ;Put printing message on LCD screen + M117 Printing... +end2.gcode = ;End GCode + M104 T0 S0 ;extruder heater off + M104 T1 S0 ;extruder heater off + M140 S0 ;heated bed heater off (if you have it) + G91 ;relative positioning + G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure + G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more + G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way + M84 ;steppers off + G90 ;absolute positioning + ;{profile_string} +start3.gcode = ;Sliced at: {day} {date} {time} + ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} + ;Print time: {print_time} + ;Filament used: {filament_amount}m {filament_weight}g + ;Filament cost: {filament_cost} + ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line + ;M104 S{print_temperature} ;Uncomment to add your own temperature line + ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line + ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line + G21 ;metric values + G90 ;absolute positioning + M107 ;start with the fan off + G28 X0 Y0 ;move X/Y to min endstops + G28 Z0 ;move Z to min endstops + G1 Z15.0 F{travel_speed} ;move the platform down 15mm + T2 ;Switch to the 2nd extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F200 E-{retraction_dual_amount} + T1 ;Switch to the 2nd extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F200 E-{retraction_dual_amount} + T0 ;Switch to the first extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F{travel_speed} + ;Put printing message on LCD screen + M117 Printing... +end3.gcode = ;End GCode + M104 T0 S0 ;extruder heater off + M104 T1 S0 ;extruder heater off + M104 T2 S0 ;extruder heater off + M140 S0 ;heated bed heater off (if you have it) + G91 ;relative positioning + G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure + G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more + G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way + M84 ;steppers off + G90 ;absolute positioning + ;{profile_string} +start4.gcode = ;Sliced at: {day} {date} {time} + ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} + ;Print time: {print_time} + ;Filament used: {filament_amount}m {filament_weight}g + ;Filament cost: {filament_cost} + ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line + ;M104 S{print_temperature} ;Uncomment to add your own temperature line + ;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line + ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line + ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line + G21 ;metric values + G90 ;absolute positioning + M107 ;start with the fan off + G28 X0 Y0 ;move X/Y to min endstops + G28 Z0 ;move Z to min endstops + G1 Z15.0 F{travel_speed} ;move the platform down 15mm + T3 ;Switch to the 4th extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F200 E-{retraction_dual_amount} + T2 ;Switch to the 3th extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F200 E-{retraction_dual_amount} + T1 ;Switch to the 2nd extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F200 E-{retraction_dual_amount} + T0 ;Switch to the first extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F{travel_speed} + ;Put printing message on LCD screen + M117 Printing... +end4.gcode = ;End GCode + M104 T0 S0 ;extruder heater off + M104 T1 S0 ;extruder heater off + M104 T2 S0 ;extruder heater off + M104 T3 S0 ;extruder heater off + M140 S0 ;heated bed heater off (if you have it) + G91 ;relative positioning + G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure + G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more + G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way + M84 ;steppers off + G90 ;absolute positioning + ;{profile_string} +support_start.gcode = +support_end.gcode = +cool_start.gcode = +cool_end.gcode = +replace.csv = +preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders. + ;This code is added before the T(n) +postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders. + ;This code is added after the T(n) + diff --git a/resources/quickprint/lulzbot_profiles/Mini_single_extruder_v2/bamboofill_high-quality_Mini_single-extruder-v2_0.5noz_cura.ini b/resources/quickprint/lulzbot_profiles/Mini_single_extruder_v2/bamboofill_high-quality_Mini_single-extruder-v2_0.5noz_cura.ini new file mode 100644 index 00000000..dd72aad3 --- /dev/null +++ b/resources/quickprint/lulzbot_profiles/Mini_single_extruder_v2/bamboofill_high-quality_Mini_single-extruder-v2_0.5noz_cura.ini @@ -0,0 +1,300 @@ +[profile] +layer_height = 0.25 +wall_thickness = 1 +retraction_enable = True +solid_layer_thickness = 1 +fill_density = 20 +perimeter_before_infill = True +nozzle_size = 0.5 +print_speed = 50 +print_temperature = 190 +print_temperature2 = 0 +print_temperature3 = 0 +print_temperature4 = 0 +print_temperature5 = 0 +print_bed_temperature = 60 +support = None +platform_adhesion = None +support_dual_extrusion = Both +wipe_tower = False +wipe_tower_volume = 15 +ooze_shield = False +filament_diameter = 2.85 +filament_diameter2 = 0 +filament_diameter3 = 0 +filament_diameter4 = 0 +filament_diameter5 = 0 +filament_flow = 100.0 +retraction_speed = 10 +retraction_amount = 1.5 +retraction_dual_amount = 16.5 +retraction_min_travel = 1.5 +retraction_combing = All +retraction_minimal_extrusion = 0.005 +retraction_hop = 0.1 +bottom_thickness = 0.425 +layer0_width_factor = 125 +object_sink = 0.0 +overlap_dual = 0.15 +travel_speed = 175 +bottom_layer_speed = 15 +infill_speed = 50 +solidarea_speed = 50 +inset0_speed = 40 +insetx_speed = 45 +cool_min_layer_time = 5 +fan_enabled = True +skirt_line_count = 1 +skirt_gap = 3.0 +skirt_minimal_length = 250 +fan_full_height = 0.5 +fan_speed = 100 +fan_speed_max = 100 +cool_min_feedrate = 10 +cool_head_lift = False +solid_top = True +solid_bottom = True +fill_overlap = 15 +support_type = Lines +support_angle = 45 +support_fill_rate = 30 +support_xy_distance = 0.7 +support_z_distance = 0.05 +spiralize = False +simple_mode = False +brim_line_count = 10 +raft_margin = 5.0 +raft_line_spacing = 3.0 +raft_base_thickness = 0.3 +raft_base_linewidth = 1.0 +raft_interface_thickness = 0.27 +raft_interface_linewidth = 0.4 +raft_airgap_all = 0.0 +raft_airgap = 0.5 +raft_surface_layers = 2 +raft_surface_thickness = 0.27 +raft_surface_linewidth = 0.4 +fix_horrible_union_all_type_a = True +fix_horrible_union_all_type_b = False +fix_horrible_use_open_bits = False +fix_horrible_extensive_stitching = False +plugin_config = +object_center_x = -1 +object_center_y = -1 +simplemodesettings = +simplemodeprofile = 2_normal +simplemodematerial = 1_pla +simplemodematerialtype = Beginner + +[alterations] +start.gcode = ;This Gcode has been generated specifically for the LulzBot Mini + ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} + ;Filament Diameter: {filament_diameter} + ;Nozzle Size: {nozzle_size} + G21 ; metric values + G90 ; absolute positioning + M82 ; set extruder to absolute mode + M107 ; start with the fan off + G92 E0 ; set extruder position to 0 + M140 S{print_bed_temperature}; get bed heating up + G28 ; home all + M109 S130 ; set to cleaning temp and wait + G1 Z150 E-30 F75 ; suck up XXmm of filament + M109 S130 ; heat up rest of way + G1 X45 Y174 F11520 ; move behind scraper + G1 Z0 F1200 ; CRITICAL: set Z to height of top of scraper + G1 X45 Y174 Z-.5 F4000 ; wiping ; plunge into wipe pad + G1 X55 Y172 Z-.5 F4000 ; wiping + G1 X45 Y174 Z0 F4000 ; wiping + G1 X55 Y172 F4000 ; wiping + G1 X45 Y174 F4000 ; wiping + G1 X55 Y172 F4000 ; wiping + G1 X45 Y174 F4000 ; wiping + G1 X55 Y172 F4000 ; wiping + G1 X60 Y174 F4000 ; wiping + G1 X80 Y172 F4000 ; wiping + G1 X60 Y174 F4000 ; wiping + G1 X80 Y172 F4000 ; wiping + G1 X60 Y174 F4000 ; wiping + G1 X90 Y172 F4000 ; wiping + G1 X80 Y174 F4000 ; wiping + G1 X100 Y172 F4000 ; wiping + G1 X80 Y174 F4000 ; wiping + G1 X100 Y172 F4000 ; wiping + G1 X80 Y174 F4000 ; wiping + G1 X100 Y172 F4000 ; wiping + G1 X110 Y174 F4000 ; wiping + G1 X100 Y172 F4000 ; wiping + G1 X110 Y174 F4000 ; wiping + G1 X100 Y172 F4000 ; wiping + G1 X110 Y174 F4000 ; wiping + G1 X115 Y172 Z-0.5 F1000 ; wipe slower and bury noz in cleanish area + G1 Z10 ; raise z + G28 X0 Y0 ; home x and y + M109 S130 ; set to probing temp + M204 S300 ; Set probing acceleration + G29 ; Probe + M204 S2000 ; Restore standard acceleration + G1 X5 Y15 Z10 F5000 ; get out the way + G4 S1 ; pause + M400 ; clear buffer + M109 S{print_temperature} ; set extruder temp and wait + G4 S15 ; wait for bed to temp up + G1 Z2 E0 F75 ; extrude filament back into nozzle + M140 S{print_bed_temperature}; get bed temping up during first layer +end.gcode = + M400 + M104 S0 ; hotend off + M140 S0 ; heated bed heater off (if you have it) + M107 ; fans off + G92 E5 ; set extruder to 5mm for retract on print end + G1 X5 Y5 Z156 E0 F10000 ; move to cooling positioning + M190 R50 ; wait for bed to cool + M140 S0 ; bed off + G1 X145 Y175 Z156 F1000 ; move to cooling positioning + M84 ; steppers off + G90 ; absolute positioning + ;{profile_string} +start2.gcode = ;Sliced at: {day} {date} {time} + ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} + ;Print time: {print_time} + ;Filament used: {filament_amount}m {filament_weight}g + ;Filament cost: {filament_cost} + ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line + ;M104 S{print_temperature} ;Uncomment to add your own temperature line + ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line + ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line + G21 ;metric values + G90 ;absolute positioning + M107 ;start with the fan off + G28 X0 Y0 ;move X/Y to min endstops + G28 Z0 ;move Z to min endstops + G1 Z15.0 F{travel_speed} ;move the platform down 15mm + T1 ;Switch to the 2nd extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F200 E-{retraction_dual_amount} + T0 ;Switch to the first extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F{travel_speed} + ;Put printing message on LCD screen + M117 Printing... +end2.gcode = ;End GCode + M104 T0 S0 ;extruder heater off + M104 T1 S0 ;extruder heater off + M140 S0 ;heated bed heater off (if you have it) + G91 ;relative positioning + G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure + G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more + G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way + M84 ;steppers off + G90 ;absolute positioning + ;{profile_string} +start3.gcode = ;Sliced at: {day} {date} {time} + ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} + ;Print time: {print_time} + ;Filament used: {filament_amount}m {filament_weight}g + ;Filament cost: {filament_cost} + ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line + ;M104 S{print_temperature} ;Uncomment to add your own temperature line + ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line + ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line + G21 ;metric values + G90 ;absolute positioning + M107 ;start with the fan off + G28 X0 Y0 ;move X/Y to min endstops + G28 Z0 ;move Z to min endstops + G1 Z15.0 F{travel_speed} ;move the platform down 15mm + T2 ;Switch to the 2nd extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F200 E-{retraction_dual_amount} + T1 ;Switch to the 2nd extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F200 E-{retraction_dual_amount} + T0 ;Switch to the first extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F{travel_speed} + ;Put printing message on LCD screen + M117 Printing... +end3.gcode = ;End GCode + M104 T0 S0 ;extruder heater off + M104 T1 S0 ;extruder heater off + M104 T2 S0 ;extruder heater off + M140 S0 ;heated bed heater off (if you have it) + G91 ;relative positioning + G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure + G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more + G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way + M84 ;steppers off + G90 ;absolute positioning + ;{profile_string} +start4.gcode = ;Sliced at: {day} {date} {time} + ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} + ;Print time: {print_time} + ;Filament used: {filament_amount}m {filament_weight}g + ;Filament cost: {filament_cost} + ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line + ;M104 S{print_temperature} ;Uncomment to add your own temperature line + ;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line + ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line + ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line + G21 ;metric values + G90 ;absolute positioning + M107 ;start with the fan off + G28 X0 Y0 ;move X/Y to min endstops + G28 Z0 ;move Z to min endstops + G1 Z15.0 F{travel_speed} ;move the platform down 15mm + T3 ;Switch to the 4th extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F200 E-{retraction_dual_amount} + T2 ;Switch to the 3th extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F200 E-{retraction_dual_amount} + T1 ;Switch to the 2nd extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F200 E-{retraction_dual_amount} + T0 ;Switch to the first extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F{travel_speed} + ;Put printing message on LCD screen + M117 Printing... +end4.gcode = ;End GCode + M104 T0 S0 ;extruder heater off + M104 T1 S0 ;extruder heater off + M104 T2 S0 ;extruder heater off + M104 T3 S0 ;extruder heater off + M140 S0 ;heated bed heater off (if you have it) + G91 ;relative positioning + G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure + G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more + G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way + M84 ;steppers off + G90 ;absolute positioning + ;{profile_string} +support_start.gcode = +support_end.gcode = +cool_start.gcode = +cool_end.gcode = +replace.csv = +preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders. + ;This code is added before the T(n) +postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders. + ;This code is added after the T(n) + diff --git a/resources/quickprint/lulzbot_profiles/Mini_single_extruder_v2/bronzefill_high-speed_Mini_single-extruder-v2_0.5noz_cura.ini b/resources/quickprint/lulzbot_profiles/Mini_single_extruder_v2/bronzefill_high-speed_Mini_single-extruder-v2_0.5noz_cura.ini index 414993d9..6e4b4aa6 100644 --- a/resources/quickprint/lulzbot_profiles/Mini_single_extruder_v2/bronzefill_high-speed_Mini_single-extruder-v2_0.5noz_cura.ini +++ b/resources/quickprint/lulzbot_profiles/Mini_single_extruder_v2/bronzefill_high-speed_Mini_single-extruder-v2_0.5noz_cura.ini @@ -7,7 +7,7 @@ fill_density = 20 perimeter_before_infill = True nozzle_size = 0.5 print_speed = 50 -print_temperature = 230 +print_temperature = 215 print_temperature2 = 0 print_temperature3 = 0 print_temperature4 = 0 @@ -38,17 +38,17 @@ object_sink = 0.0 overlap_dual = 0.15 travel_speed = 175 bottom_layer_speed = 15 -infill_speed = 40 -solidarea_speed = 0.0 -inset0_speed = 30 -insetx_speed = 35 -cool_min_layer_time = 20 +infill_speed = 30 +solidarea_speed = 25 +inset0_speed = 25 +insetx_speed = 30 +cool_min_layer_time = 5 fan_enabled = True skirt_line_count = 1 skirt_gap = 3.0 skirt_minimal_length = 250 fan_full_height = 0.5 -fan_speed = 75 +fan_speed = 100 fan_speed_max = 100 cool_min_feedrate = 10 cool_head_lift = False @@ -84,6 +84,7 @@ object_center_y = -1 simplemodesettings = simplemodeprofile = 2_normal simplemodematerial = 1_pla +simplemodematerialtype = Beginner [alterations] start.gcode = ;This Gcode has been generated specifically for the LulzBot Mini @@ -99,7 +100,7 @@ start.gcode = ;This Gcode has been generated specifically for the LulzBot Mini G28 ; home all M109 S140 ; set to cleaning temp and wait G1 Z150 E-30 F75 ; suck up XXmm of filament - M109 S140 ; heat up rest of way + M109 S150 ; heat up rest of way G1 X45 Y174 F11520 ; move behind scraper G1 Z0 F1200 ; CRITICAL: set Z to height of top of scraper G1 X45 Y174 Z-.5 F4000 ; wiping ; plunge into wipe pad @@ -130,7 +131,7 @@ start.gcode = ;This Gcode has been generated specifically for the LulzBot Mini G1 X115 Y172 Z-0.5 F1000 ; wipe slower and bury noz in cleanish area G1 Z10 ; raise z G28 X0 Y0 ; home x and y - M109 S140 ; set to probing temp + M109 S150 ; set to probing temp M204 S300 ; Set probing acceleration G29 ; Probe M204 S2000 ; Restore standard acceleration diff --git a/resources/quickprint/lulzbot_profiles/Mini_single_extruder_v2/copperfill_high-speed_Mini_single-extruder-v2_0.5noz_cura.ini b/resources/quickprint/lulzbot_profiles/Mini_single_extruder_v2/copperfill_high-speed_Mini_single-extruder-v2_0.5noz_cura.ini index 414993d9..6e4b4aa6 100644 --- a/resources/quickprint/lulzbot_profiles/Mini_single_extruder_v2/copperfill_high-speed_Mini_single-extruder-v2_0.5noz_cura.ini +++ b/resources/quickprint/lulzbot_profiles/Mini_single_extruder_v2/copperfill_high-speed_Mini_single-extruder-v2_0.5noz_cura.ini @@ -7,7 +7,7 @@ fill_density = 20 perimeter_before_infill = True nozzle_size = 0.5 print_speed = 50 -print_temperature = 230 +print_temperature = 215 print_temperature2 = 0 print_temperature3 = 0 print_temperature4 = 0 @@ -38,17 +38,17 @@ object_sink = 0.0 overlap_dual = 0.15 travel_speed = 175 bottom_layer_speed = 15 -infill_speed = 40 -solidarea_speed = 0.0 -inset0_speed = 30 -insetx_speed = 35 -cool_min_layer_time = 20 +infill_speed = 30 +solidarea_speed = 25 +inset0_speed = 25 +insetx_speed = 30 +cool_min_layer_time = 5 fan_enabled = True skirt_line_count = 1 skirt_gap = 3.0 skirt_minimal_length = 250 fan_full_height = 0.5 -fan_speed = 75 +fan_speed = 100 fan_speed_max = 100 cool_min_feedrate = 10 cool_head_lift = False @@ -84,6 +84,7 @@ object_center_y = -1 simplemodesettings = simplemodeprofile = 2_normal simplemodematerial = 1_pla +simplemodematerialtype = Beginner [alterations] start.gcode = ;This Gcode has been generated specifically for the LulzBot Mini @@ -99,7 +100,7 @@ start.gcode = ;This Gcode has been generated specifically for the LulzBot Mini G28 ; home all M109 S140 ; set to cleaning temp and wait G1 Z150 E-30 F75 ; suck up XXmm of filament - M109 S140 ; heat up rest of way + M109 S150 ; heat up rest of way G1 X45 Y174 F11520 ; move behind scraper G1 Z0 F1200 ; CRITICAL: set Z to height of top of scraper G1 X45 Y174 Z-.5 F4000 ; wiping ; plunge into wipe pad @@ -130,7 +131,7 @@ start.gcode = ;This Gcode has been generated specifically for the LulzBot Mini G1 X115 Y172 Z-0.5 F1000 ; wipe slower and bury noz in cleanish area G1 Z10 ; raise z G28 X0 Y0 ; home x and y - M109 S140 ; set to probing temp + M109 S150 ; set to probing temp M204 S300 ; Set probing acceleration G29 ; Probe M204 S2000 ; Restore standard acceleration diff --git a/resources/quickprint/lulzbot_profiles/Mini_single_extruder_v2/woodfill_high-quality_Mini_single-extruder-v2_0.5noz_cura.ini b/resources/quickprint/lulzbot_profiles/Mini_single_extruder_v2/woodfill_high-quality_Mini_single-extruder-v2_0.5noz_cura.ini new file mode 100644 index 00000000..dd72aad3 --- /dev/null +++ b/resources/quickprint/lulzbot_profiles/Mini_single_extruder_v2/woodfill_high-quality_Mini_single-extruder-v2_0.5noz_cura.ini @@ -0,0 +1,300 @@ +[profile] +layer_height = 0.25 +wall_thickness = 1 +retraction_enable = True +solid_layer_thickness = 1 +fill_density = 20 +perimeter_before_infill = True +nozzle_size = 0.5 +print_speed = 50 +print_temperature = 190 +print_temperature2 = 0 +print_temperature3 = 0 +print_temperature4 = 0 +print_temperature5 = 0 +print_bed_temperature = 60 +support = None +platform_adhesion = None +support_dual_extrusion = Both +wipe_tower = False +wipe_tower_volume = 15 +ooze_shield = False +filament_diameter = 2.85 +filament_diameter2 = 0 +filament_diameter3 = 0 +filament_diameter4 = 0 +filament_diameter5 = 0 +filament_flow = 100.0 +retraction_speed = 10 +retraction_amount = 1.5 +retraction_dual_amount = 16.5 +retraction_min_travel = 1.5 +retraction_combing = All +retraction_minimal_extrusion = 0.005 +retraction_hop = 0.1 +bottom_thickness = 0.425 +layer0_width_factor = 125 +object_sink = 0.0 +overlap_dual = 0.15 +travel_speed = 175 +bottom_layer_speed = 15 +infill_speed = 50 +solidarea_speed = 50 +inset0_speed = 40 +insetx_speed = 45 +cool_min_layer_time = 5 +fan_enabled = True +skirt_line_count = 1 +skirt_gap = 3.0 +skirt_minimal_length = 250 +fan_full_height = 0.5 +fan_speed = 100 +fan_speed_max = 100 +cool_min_feedrate = 10 +cool_head_lift = False +solid_top = True +solid_bottom = True +fill_overlap = 15 +support_type = Lines +support_angle = 45 +support_fill_rate = 30 +support_xy_distance = 0.7 +support_z_distance = 0.05 +spiralize = False +simple_mode = False +brim_line_count = 10 +raft_margin = 5.0 +raft_line_spacing = 3.0 +raft_base_thickness = 0.3 +raft_base_linewidth = 1.0 +raft_interface_thickness = 0.27 +raft_interface_linewidth = 0.4 +raft_airgap_all = 0.0 +raft_airgap = 0.5 +raft_surface_layers = 2 +raft_surface_thickness = 0.27 +raft_surface_linewidth = 0.4 +fix_horrible_union_all_type_a = True +fix_horrible_union_all_type_b = False +fix_horrible_use_open_bits = False +fix_horrible_extensive_stitching = False +plugin_config = +object_center_x = -1 +object_center_y = -1 +simplemodesettings = +simplemodeprofile = 2_normal +simplemodematerial = 1_pla +simplemodematerialtype = Beginner + +[alterations] +start.gcode = ;This Gcode has been generated specifically for the LulzBot Mini + ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} + ;Filament Diameter: {filament_diameter} + ;Nozzle Size: {nozzle_size} + G21 ; metric values + G90 ; absolute positioning + M82 ; set extruder to absolute mode + M107 ; start with the fan off + G92 E0 ; set extruder position to 0 + M140 S{print_bed_temperature}; get bed heating up + G28 ; home all + M109 S130 ; set to cleaning temp and wait + G1 Z150 E-30 F75 ; suck up XXmm of filament + M109 S130 ; heat up rest of way + G1 X45 Y174 F11520 ; move behind scraper + G1 Z0 F1200 ; CRITICAL: set Z to height of top of scraper + G1 X45 Y174 Z-.5 F4000 ; wiping ; plunge into wipe pad + G1 X55 Y172 Z-.5 F4000 ; wiping + G1 X45 Y174 Z0 F4000 ; wiping + G1 X55 Y172 F4000 ; wiping + G1 X45 Y174 F4000 ; wiping + G1 X55 Y172 F4000 ; wiping + G1 X45 Y174 F4000 ; wiping + G1 X55 Y172 F4000 ; wiping + G1 X60 Y174 F4000 ; wiping + G1 X80 Y172 F4000 ; wiping + G1 X60 Y174 F4000 ; wiping + G1 X80 Y172 F4000 ; wiping + G1 X60 Y174 F4000 ; wiping + G1 X90 Y172 F4000 ; wiping + G1 X80 Y174 F4000 ; wiping + G1 X100 Y172 F4000 ; wiping + G1 X80 Y174 F4000 ; wiping + G1 X100 Y172 F4000 ; wiping + G1 X80 Y174 F4000 ; wiping + G1 X100 Y172 F4000 ; wiping + G1 X110 Y174 F4000 ; wiping + G1 X100 Y172 F4000 ; wiping + G1 X110 Y174 F4000 ; wiping + G1 X100 Y172 F4000 ; wiping + G1 X110 Y174 F4000 ; wiping + G1 X115 Y172 Z-0.5 F1000 ; wipe slower and bury noz in cleanish area + G1 Z10 ; raise z + G28 X0 Y0 ; home x and y + M109 S130 ; set to probing temp + M204 S300 ; Set probing acceleration + G29 ; Probe + M204 S2000 ; Restore standard acceleration + G1 X5 Y15 Z10 F5000 ; get out the way + G4 S1 ; pause + M400 ; clear buffer + M109 S{print_temperature} ; set extruder temp and wait + G4 S15 ; wait for bed to temp up + G1 Z2 E0 F75 ; extrude filament back into nozzle + M140 S{print_bed_temperature}; get bed temping up during first layer +end.gcode = + M400 + M104 S0 ; hotend off + M140 S0 ; heated bed heater off (if you have it) + M107 ; fans off + G92 E5 ; set extruder to 5mm for retract on print end + G1 X5 Y5 Z156 E0 F10000 ; move to cooling positioning + M190 R50 ; wait for bed to cool + M140 S0 ; bed off + G1 X145 Y175 Z156 F1000 ; move to cooling positioning + M84 ; steppers off + G90 ; absolute positioning + ;{profile_string} +start2.gcode = ;Sliced at: {day} {date} {time} + ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} + ;Print time: {print_time} + ;Filament used: {filament_amount}m {filament_weight}g + ;Filament cost: {filament_cost} + ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line + ;M104 S{print_temperature} ;Uncomment to add your own temperature line + ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line + ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line + G21 ;metric values + G90 ;absolute positioning + M107 ;start with the fan off + G28 X0 Y0 ;move X/Y to min endstops + G28 Z0 ;move Z to min endstops + G1 Z15.0 F{travel_speed} ;move the platform down 15mm + T1 ;Switch to the 2nd extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F200 E-{retraction_dual_amount} + T0 ;Switch to the first extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F{travel_speed} + ;Put printing message on LCD screen + M117 Printing... +end2.gcode = ;End GCode + M104 T0 S0 ;extruder heater off + M104 T1 S0 ;extruder heater off + M140 S0 ;heated bed heater off (if you have it) + G91 ;relative positioning + G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure + G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more + G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way + M84 ;steppers off + G90 ;absolute positioning + ;{profile_string} +start3.gcode = ;Sliced at: {day} {date} {time} + ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} + ;Print time: {print_time} + ;Filament used: {filament_amount}m {filament_weight}g + ;Filament cost: {filament_cost} + ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line + ;M104 S{print_temperature} ;Uncomment to add your own temperature line + ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line + ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line + G21 ;metric values + G90 ;absolute positioning + M107 ;start with the fan off + G28 X0 Y0 ;move X/Y to min endstops + G28 Z0 ;move Z to min endstops + G1 Z15.0 F{travel_speed} ;move the platform down 15mm + T2 ;Switch to the 2nd extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F200 E-{retraction_dual_amount} + T1 ;Switch to the 2nd extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F200 E-{retraction_dual_amount} + T0 ;Switch to the first extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F{travel_speed} + ;Put printing message on LCD screen + M117 Printing... +end3.gcode = ;End GCode + M104 T0 S0 ;extruder heater off + M104 T1 S0 ;extruder heater off + M104 T2 S0 ;extruder heater off + M140 S0 ;heated bed heater off (if you have it) + G91 ;relative positioning + G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure + G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more + G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way + M84 ;steppers off + G90 ;absolute positioning + ;{profile_string} +start4.gcode = ;Sliced at: {day} {date} {time} + ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} + ;Print time: {print_time} + ;Filament used: {filament_amount}m {filament_weight}g + ;Filament cost: {filament_cost} + ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line + ;M104 S{print_temperature} ;Uncomment to add your own temperature line + ;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line + ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line + ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line + G21 ;metric values + G90 ;absolute positioning + M107 ;start with the fan off + G28 X0 Y0 ;move X/Y to min endstops + G28 Z0 ;move Z to min endstops + G1 Z15.0 F{travel_speed} ;move the platform down 15mm + T3 ;Switch to the 4th extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F200 E-{retraction_dual_amount} + T2 ;Switch to the 3th extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F200 E-{retraction_dual_amount} + T1 ;Switch to the 2nd extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F200 E-{retraction_dual_amount} + T0 ;Switch to the first extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F{travel_speed} + ;Put printing message on LCD screen + M117 Printing... +end4.gcode = ;End GCode + M104 T0 S0 ;extruder heater off + M104 T1 S0 ;extruder heater off + M104 T2 S0 ;extruder heater off + M104 T3 S0 ;extruder heater off + M140 S0 ;heated bed heater off (if you have it) + G91 ;relative positioning + G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure + G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more + G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way + M84 ;steppers off + G90 ;absolute positioning + ;{profile_string} +support_start.gcode = +support_end.gcode = +cool_start.gcode = +cool_end.gcode = +replace.csv = +preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders. + ;This code is added before the T(n) +postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders. + ;This code is added after the T(n) + diff --git a/resources/quickprint/lulzbot_profiles/TAZ_single_extruder_0.35nozzle/XT_high-quality_TAZ_single-extruder_0.35noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ_single_extruder_0.35nozzle/XT_high-quality_TAZ_single-extruder_0.35noz_cura.ini new file mode 100644 index 00000000..b075dfea --- /dev/null +++ b/resources/quickprint/lulzbot_profiles/TAZ_single_extruder_0.35nozzle/XT_high-quality_TAZ_single-extruder_0.35noz_cura.ini @@ -0,0 +1,256 @@ +[profile] +layer_height = 0.14 +wall_thickness = 1.05 +retraction_enable = True +solid_layer_thickness = 0.56 +fill_density = 20 +nozzle_size = 0.35 +print_speed = 50 +print_temperature = 0 +print_temperature2 = 0 +print_temperature3 = 0 +print_temperature4 = 0 +print_bed_temperature = 0 +support = None +platform_adhesion = None +support_dual_extrusion = Both +wipe_tower = False +wipe_tower_volume = 15 +ooze_shield = False +filament_diameter = 2.85 +filament_diameter2 = 0 +filament_diameter3 = 0 +filament_diameter4 = 0 +filament_flow = 100.0 +retraction_speed = 10 +retraction_amount = 1 +retraction_dual_amount = 16.5 +retraction_min_travel = 1.5 +retraction_combing = All +retraction_minimal_extrusion = 0.005 +retraction_hop = 0.1 +bottom_thickness = 0.425 +layer0_width_factor = 125 +object_sink = 0.0 +overlap_dual = 0.15 +travel_speed = 175 +bottom_layer_speed = 8 +infill_speed = 40 +solidarea_speed = 30 +inset0_speed = 30 +insetx_speed = 35 +cool_min_layer_time = 15 +fan_enabled = True +skirt_line_count = 1 +skirt_gap = 3.0 +skirt_minimal_length = 250 +fan_full_height = 0.5 +fan_speed = 40 +fan_speed_max = 60 +cool_min_feedrate = 10 +cool_head_lift = False +solid_top = True +solid_bottom = True +fill_overlap = 15 +support_type = Lines +support_angle = 45 +support_fill_rate = 30 +support_xy_distance = 0.7 +support_z_distance = 0.05 +spiralize = False +simple_mode = False +brim_line_count = 10 +raft_margin = 5.0 +raft_line_spacing = 3.0 +raft_base_thickness = 0.3 +raft_base_linewidth = 1.0 +raft_interface_thickness = 0.27 +raft_interface_linewidth = 0.4 +raft_airgap = 0.5 +raft_surface_layers = 2 +fix_horrible_union_all_type_a = True +fix_horrible_union_all_type_b = False +fix_horrible_use_open_bits = False +fix_horrible_extensive_stitching = False +plugin_config = (lp1 + . +object_center_x = -1 +object_center_y = -1 + +[alterations] +start.gcode = ;Sliced at: {day} {date} {time} + ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} + ;Print time: {print_time} + ;Filament used: {filament_amount}m {filament_weight}g + ;Filament cost: {filament_cost} + ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line + ;M109 S{print_temperature} ;Uncomment to add your own temperature line + G21 ;metric values + G90 ;absolute positioning + M82 ;set extruder to absolute mode + M107 ;start with the fan off + G28 X0 Y0 ;move X/Y to min endstops + G28 Z0 ;move Z to min endstops + G1 Z15.0 F{travel_speed};move the platform down 15mm + G92 E0 ; zero the extruded length + G1 F200 E0 ; extrude 3mm of feed stock + G92 E0 ; zero the extruded length again + G1 F{travel_speed} ; set travel speed + M203 X192 Y208 Z3 ; speed limits + M117 Printing... ; send message to LCD +end.gcode = M400 + M104 S0 ; hotend off + M140 S0 ; heated bed heater off (if you have it) + M107 ; fans off + G91 ; relative positioning + G1 E-1 F300 ; retract the filament a bit before lifting the nozzle, to release some of the pressure + G1 Z+0.5 E-5 X-20 Y-20 F3000 ; move Z up a bit and retract filament even more + G90 ; absolute positioning + G1 X0 Y250 ; move to cooling position + M84 ; steppers off + G90 ; absolute positioning + M117 TAZ Ready. + ;{profile_string} +start2.gcode = ;Sliced at: {day} {date} {time} + ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} + ;Print time: {print_time} + ;Filament used: {filament_amount}m {filament_weight}g + ;Filament cost: {filament_cost} + ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line + ;M104 S{print_temperature} ;Uncomment to add your own temperature line + ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line + ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line + G21 ;metric values + G90 ;absolute positioning + M107 ;start with the fan off + G28 X0 Y0 ;move X/Y to min endstops + G28 Z0 ;move Z to min endstops + G1 Z15.0 F{travel_speed} ;move the platform down 15mm + T1 ;Switch to the 2nd extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F200 E-{retraction_dual_amount} + T0 ;Switch to the first extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F{travel_speed} + ;Put printing message on LCD screen + M117 Printing... +end2.gcode = ;End GCode + M104 T0 S0 ;extruder heater off + M104 T1 S0 ;extruder heater off + M140 S0 ;heated bed heater off (if you have it) + G91 ;relative positioning + G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure + G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more + G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way + M84 ;steppers off + G90 ;absolute positioning + ;{profile_string} +start3.gcode = ;Sliced at: {day} {date} {time} + ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} + ;Print time: {print_time} + ;Filament used: {filament_amount}m {filament_weight}g + ;Filament cost: {filament_cost} + ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line + ;M104 S{print_temperature} ;Uncomment to add your own temperature line + ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line + ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line + G21 ;metric values + G90 ;absolute positioning + M107 ;start with the fan off + G28 X0 Y0 ;move X/Y to min endstops + G28 Z0 ;move Z to min endstops + G1 Z15.0 F{travel_speed} ;move the platform down 15mm + T2 ;Switch to the 2nd extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F200 E-{retraction_dual_amount} + T1 ;Switch to the 2nd extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F200 E-{retraction_dual_amount} + T0 ;Switch to the first extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F{travel_speed} + ;Put printing message on LCD screen + M117 Printing... +end3.gcode = ;End GCode + M104 T0 S0 ;extruder heater off + M104 T1 S0 ;extruder heater off + M104 T2 S0 ;extruder heater off + M140 S0 ;heated bed heater off (if you have it) + G91 ;relative positioning + G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure + G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more + G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way + M84 ;steppers off + G90 ;absolute positioning + ;{profile_string} +start4.gcode = ;Sliced at: {day} {date} {time} + ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} + ;Print time: {print_time} + ;Filament used: {filament_amount}m {filament_weight}g + ;Filament cost: {filament_cost} + ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line + ;M104 S{print_temperature} ;Uncomment to add your own temperature line + ;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line + ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line + ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line + G21 ;metric values + G90 ;absolute positioning + M107 ;start with the fan off + G28 X0 Y0 ;move X/Y to min endstops + G28 Z0 ;move Z to min endstops + G1 Z15.0 F{travel_speed} ;move the platform down 15mm + T3 ;Switch to the 4th extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F200 E-{retraction_dual_amount} + T2 ;Switch to the 3th extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F200 E-{retraction_dual_amount} + T1 ;Switch to the 2nd extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F200 E-{retraction_dual_amount} + T0 ;Switch to the first extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F{travel_speed} + ;Put printing message on LCD screen + M117 Printing... +end4.gcode = ;End GCode + M104 T0 S0 ;extruder heater off + M104 T1 S0 ;extruder heater off + M104 T2 S0 ;extruder heater off + M104 T3 S0 ;extruder heater off + M140 S0 ;heated bed heater off (if you have it) + G91 ;relative positioning + G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure + G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more + G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way + M84 ;steppers off + G90 ;absolute positioning + ;{profile_string} +support_start.gcode = +support_end.gcode = +cool_start.gcode = +cool_end.gcode = +replace.csv = +preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders. + ;This code is added before the T(n) +postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders. + ;This code is added after the T(n) + diff --git a/resources/quickprint/lulzbot_profiles/TAZ_single_extruder_0.35nozzle/XT_high-speed_TAZ_single-extruder_0.35noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ_single_extruder_0.35nozzle/XT_high-speed_TAZ_single-extruder_0.35noz_cura.ini new file mode 100644 index 00000000..edf1483f --- /dev/null +++ b/resources/quickprint/lulzbot_profiles/TAZ_single_extruder_0.35nozzle/XT_high-speed_TAZ_single-extruder_0.35noz_cura.ini @@ -0,0 +1,256 @@ +[profile] +layer_height = 0.28 +wall_thickness = 1.05 +retraction_enable = True +solid_layer_thickness = 0.6 +fill_density = 20 +nozzle_size = 0.35 +print_speed = 50 +print_temperature = 0 +print_temperature2 = 0 +print_temperature3 = 0 +print_temperature4 = 0 +print_bed_temperature = 0 +support = None +platform_adhesion = None +support_dual_extrusion = Both +wipe_tower = False +wipe_tower_volume = 15 +ooze_shield = False +filament_diameter = 2.85 +filament_diameter2 = 0 +filament_diameter3 = 0 +filament_diameter4 = 0 +filament_flow = 100.0 +retraction_speed = 10 +retraction_amount = 1 +retraction_dual_amount = 16.5 +retraction_min_travel = 1.5 +retraction_combing = All +retraction_minimal_extrusion = 0.005 +retraction_hop = 0.1 +bottom_thickness = 0.425 +layer0_width_factor = 125 +object_sink = 0.0 +overlap_dual = 0.15 +travel_speed = 175 +bottom_layer_speed = 15 +infill_speed = 60 +solidarea_speed = 50 +inset0_speed = 50 +insetx_speed = 55 +cool_min_layer_time = 15 +fan_enabled = True +skirt_line_count = 1 +skirt_gap = 3.0 +skirt_minimal_length = 250 +fan_full_height = 0.5 +fan_speed = 40 +fan_speed_max = 60 +cool_min_feedrate = 10 +cool_head_lift = False +solid_top = True +solid_bottom = True +fill_overlap = 15 +support_type = Lines +support_angle = 45 +support_fill_rate = 30 +support_xy_distance = 0.7 +support_z_distance = 0.05 +spiralize = False +simple_mode = False +brim_line_count = 10 +raft_margin = 5.0 +raft_line_spacing = 3.0 +raft_base_thickness = 0.3 +raft_base_linewidth = 1.0 +raft_interface_thickness = 0.27 +raft_interface_linewidth = 0.4 +raft_airgap = 0.5 +raft_surface_layers = 2 +fix_horrible_union_all_type_a = True +fix_horrible_union_all_type_b = False +fix_horrible_use_open_bits = False +fix_horrible_extensive_stitching = False +plugin_config = (lp1 + . +object_center_x = -1 +object_center_y = -1 + +[alterations] +start.gcode = ;Sliced at: {day} {date} {time} + ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} + ;Print time: {print_time} + ;Filament used: {filament_amount}m {filament_weight}g + ;Filament cost: {filament_cost} + ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line + ;M109 S{print_temperature} ;Uncomment to add your own temperature line + G21 ;metric values + G90 ;absolute positioning + M82 ;set extruder to absolute mode + M107 ;start with the fan off + G28 X0 Y0 ;move X/Y to min endstops + G28 Z0 ;move Z to min endstops + G1 Z15.0 F{travel_speed};move the platform down 15mm + G92 E0 ; zero the extruded length + G1 F200 E0 ; extrude 3mm of feed stock + G92 E0 ; zero the extruded length again + G1 F{travel_speed} ; set travel speed + M203 X192 Y208 Z3 ; speed limits + M117 Printing... ; send message to LCD +end.gcode = M400 + M104 S0 ; hotend off + M140 S0 ; heated bed heater off (if you have it) + M107 ; fans off + G91 ; relative positioning + G1 E-1 F300 ; retract the filament a bit before lifting the nozzle, to release some of the pressure + G1 Z+0.5 E-5 X-20 Y-20 F3000 ; move Z up a bit and retract filament even more + G90 ; absolute positioning + G1 X0 Y250 ; move to cooling position + M84 ; steppers off + G90 ; absolute positioning + M117 TAZ Ready. + ;{profile_string} +start2.gcode = ;Sliced at: {day} {date} {time} + ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} + ;Print time: {print_time} + ;Filament used: {filament_amount}m {filament_weight}g + ;Filament cost: {filament_cost} + ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line + ;M104 S{print_temperature} ;Uncomment to add your own temperature line + ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line + ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line + G21 ;metric values + G90 ;absolute positioning + M107 ;start with the fan off + G28 X0 Y0 ;move X/Y to min endstops + G28 Z0 ;move Z to min endstops + G1 Z15.0 F{travel_speed} ;move the platform down 15mm + T1 ;Switch to the 2nd extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F200 E-{retraction_dual_amount} + T0 ;Switch to the first extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F{travel_speed} + ;Put printing message on LCD screen + M117 Printing... +end2.gcode = ;End GCode + M104 T0 S0 ;extruder heater off + M104 T1 S0 ;extruder heater off + M140 S0 ;heated bed heater off (if you have it) + G91 ;relative positioning + G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure + G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more + G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way + M84 ;steppers off + G90 ;absolute positioning + ;{profile_string} +start3.gcode = ;Sliced at: {day} {date} {time} + ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} + ;Print time: {print_time} + ;Filament used: {filament_amount}m {filament_weight}g + ;Filament cost: {filament_cost} + ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line + ;M104 S{print_temperature} ;Uncomment to add your own temperature line + ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line + ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line + G21 ;metric values + G90 ;absolute positioning + M107 ;start with the fan off + G28 X0 Y0 ;move X/Y to min endstops + G28 Z0 ;move Z to min endstops + G1 Z15.0 F{travel_speed} ;move the platform down 15mm + T2 ;Switch to the 2nd extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F200 E-{retraction_dual_amount} + T1 ;Switch to the 2nd extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F200 E-{retraction_dual_amount} + T0 ;Switch to the first extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F{travel_speed} + ;Put printing message on LCD screen + M117 Printing... +end3.gcode = ;End GCode + M104 T0 S0 ;extruder heater off + M104 T1 S0 ;extruder heater off + M104 T2 S0 ;extruder heater off + M140 S0 ;heated bed heater off (if you have it) + G91 ;relative positioning + G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure + G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more + G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way + M84 ;steppers off + G90 ;absolute positioning + ;{profile_string} +start4.gcode = ;Sliced at: {day} {date} {time} + ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} + ;Print time: {print_time} + ;Filament used: {filament_amount}m {filament_weight}g + ;Filament cost: {filament_cost} + ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line + ;M104 S{print_temperature} ;Uncomment to add your own temperature line + ;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line + ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line + ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line + G21 ;metric values + G90 ;absolute positioning + M107 ;start with the fan off + G28 X0 Y0 ;move X/Y to min endstops + G28 Z0 ;move Z to min endstops + G1 Z15.0 F{travel_speed} ;move the platform down 15mm + T3 ;Switch to the 4th extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F200 E-{retraction_dual_amount} + T2 ;Switch to the 3th extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F200 E-{retraction_dual_amount} + T1 ;Switch to the 2nd extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F200 E-{retraction_dual_amount} + T0 ;Switch to the first extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F{travel_speed} + ;Put printing message on LCD screen + M117 Printing... +end4.gcode = ;End GCode + M104 T0 S0 ;extruder heater off + M104 T1 S0 ;extruder heater off + M104 T2 S0 ;extruder heater off + M104 T3 S0 ;extruder heater off + M140 S0 ;heated bed heater off (if you have it) + G91 ;relative positioning + G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure + G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more + G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way + M84 ;steppers off + G90 ;absolute positioning + ;{profile_string} +support_start.gcode = +support_end.gcode = +cool_start.gcode = +cool_end.gcode = +replace.csv = +preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders. + ;This code is added before the T(n) +postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders. + ;This code is added after the T(n) + diff --git a/resources/quickprint/lulzbot_profiles/TAZ_single_extruder_0.35nozzle/XT_medium-quality_TAZ_single-extruder_0.35noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ_single_extruder_0.35nozzle/XT_medium-quality_TAZ_single-extruder_0.35noz_cura.ini new file mode 100644 index 00000000..75408e30 --- /dev/null +++ b/resources/quickprint/lulzbot_profiles/TAZ_single_extruder_0.35nozzle/XT_medium-quality_TAZ_single-extruder_0.35noz_cura.ini @@ -0,0 +1,256 @@ +[profile] +layer_height = 0.22 +wall_thickness = 1.05 +retraction_enable = True +solid_layer_thickness = 0.66 +fill_density = 20 +nozzle_size = 0.35 +print_speed = 50 +print_temperature = 0 +print_temperature2 = 0 +print_temperature3 = 0 +print_temperature4 = 0 +print_bed_temperature = 0 +support = None +platform_adhesion = None +support_dual_extrusion = Both +wipe_tower = False +wipe_tower_volume = 15 +ooze_shield = False +filament_diameter = 2.85 +filament_diameter2 = 0 +filament_diameter3 = 0 +filament_diameter4 = 0 +filament_flow = 100.0 +retraction_speed = 10 +retraction_amount = 1 +retraction_dual_amount = 16.5 +retraction_min_travel = 1.5 +retraction_combing = All +retraction_minimal_extrusion = 0.005 +retraction_hop = 0.1 +bottom_thickness = 0.425 +layer0_width_factor = 125 +object_sink = 0.0 +overlap_dual = 0.15 +travel_speed = 175 +bottom_layer_speed = 10 +infill_speed = 45 +solidarea_speed = 40 +inset0_speed = 40 +insetx_speed = 42 +cool_min_layer_time = 15 +fan_enabled = True +skirt_line_count = 1 +skirt_gap = 3.0 +skirt_minimal_length = 250 +fan_full_height = 0.5 +fan_speed = 40 +fan_speed_max = 60 +cool_min_feedrate = 10 +cool_head_lift = False +solid_top = True +solid_bottom = True +fill_overlap = 15 +support_type = Lines +support_angle = 45 +support_fill_rate = 30 +support_xy_distance = 0.7 +support_z_distance = 0.05 +spiralize = False +simple_mode = False +brim_line_count = 10 +raft_margin = 5.0 +raft_line_spacing = 3.0 +raft_base_thickness = 0.3 +raft_base_linewidth = 1.0 +raft_interface_thickness = 0.27 +raft_interface_linewidth = 0.4 +raft_airgap = 0.5 +raft_surface_layers = 2 +fix_horrible_union_all_type_a = True +fix_horrible_union_all_type_b = False +fix_horrible_use_open_bits = False +fix_horrible_extensive_stitching = False +plugin_config = (lp1 + . +object_center_x = -1 +object_center_y = -1 + +[alterations] +start.gcode = ;Sliced at: {day} {date} {time} + ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} + ;Print time: {print_time} + ;Filament used: {filament_amount}m {filament_weight}g + ;Filament cost: {filament_cost} + ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line + ;M109 S{print_temperature} ;Uncomment to add your own temperature line + G21 ;metric values + G90 ;absolute positioning + M82 ;set extruder to absolute mode + M107 ;start with the fan off + G28 X0 Y0 ;move X/Y to min endstops + G28 Z0 ;move Z to min endstops + G1 Z15.0 F{travel_speed};move the platform down 15mm + G92 E0 ; zero the extruded length + G1 F200 E0 ; extrude 3mm of feed stock + G92 E0 ; zero the extruded length again + G1 F{travel_speed} ; set travel speed + M203 X192 Y208 Z3 ; speed limits + M117 Printing... ; send message to LCD +end.gcode = M400 + M104 S0 ; hotend off + M140 S0 ; heated bed heater off (if you have it) + M107 ; fans off + G91 ; relative positioning + G1 E-1 F300 ; retract the filament a bit before lifting the nozzle, to release some of the pressure + G1 Z+0.5 E-5 X-20 Y-20 F3000 ; move Z up a bit and retract filament even more + G90 ; absolute positioning + G1 X0 Y250 ; move to cooling position + M84 ; steppers off + G90 ; absolute positioning + M117 TAZ Ready. + ;{profile_string} +start2.gcode = ;Sliced at: {day} {date} {time} + ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} + ;Print time: {print_time} + ;Filament used: {filament_amount}m {filament_weight}g + ;Filament cost: {filament_cost} + ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line + ;M104 S{print_temperature} ;Uncomment to add your own temperature line + ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line + ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line + G21 ;metric values + G90 ;absolute positioning + M107 ;start with the fan off + G28 X0 Y0 ;move X/Y to min endstops + G28 Z0 ;move Z to min endstops + G1 Z15.0 F{travel_speed} ;move the platform down 15mm + T1 ;Switch to the 2nd extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F200 E-{retraction_dual_amount} + T0 ;Switch to the first extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F{travel_speed} + ;Put printing message on LCD screen + M117 Printing... +end2.gcode = ;End GCode + M104 T0 S0 ;extruder heater off + M104 T1 S0 ;extruder heater off + M140 S0 ;heated bed heater off (if you have it) + G91 ;relative positioning + G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure + G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more + G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way + M84 ;steppers off + G90 ;absolute positioning + ;{profile_string} +start3.gcode = ;Sliced at: {day} {date} {time} + ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} + ;Print time: {print_time} + ;Filament used: {filament_amount}m {filament_weight}g + ;Filament cost: {filament_cost} + ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line + ;M104 S{print_temperature} ;Uncomment to add your own temperature line + ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line + ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line + G21 ;metric values + G90 ;absolute positioning + M107 ;start with the fan off + G28 X0 Y0 ;move X/Y to min endstops + G28 Z0 ;move Z to min endstops + G1 Z15.0 F{travel_speed} ;move the platform down 15mm + T2 ;Switch to the 2nd extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F200 E-{retraction_dual_amount} + T1 ;Switch to the 2nd extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F200 E-{retraction_dual_amount} + T0 ;Switch to the first extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F{travel_speed} + ;Put printing message on LCD screen + M117 Printing... +end3.gcode = ;End GCode + M104 T0 S0 ;extruder heater off + M104 T1 S0 ;extruder heater off + M104 T2 S0 ;extruder heater off + M140 S0 ;heated bed heater off (if you have it) + G91 ;relative positioning + G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure + G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more + G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way + M84 ;steppers off + G90 ;absolute positioning + ;{profile_string} +start4.gcode = ;Sliced at: {day} {date} {time} + ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} + ;Print time: {print_time} + ;Filament used: {filament_amount}m {filament_weight}g + ;Filament cost: {filament_cost} + ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line + ;M104 S{print_temperature} ;Uncomment to add your own temperature line + ;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line + ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line + ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line + G21 ;metric values + G90 ;absolute positioning + M107 ;start with the fan off + G28 X0 Y0 ;move X/Y to min endstops + G28 Z0 ;move Z to min endstops + G1 Z15.0 F{travel_speed} ;move the platform down 15mm + T3 ;Switch to the 4th extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F200 E-{retraction_dual_amount} + T2 ;Switch to the 3th extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F200 E-{retraction_dual_amount} + T1 ;Switch to the 2nd extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F200 E-{retraction_dual_amount} + T0 ;Switch to the first extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F{travel_speed} + ;Put printing message on LCD screen + M117 Printing... +end4.gcode = ;End GCode + M104 T0 S0 ;extruder heater off + M104 T1 S0 ;extruder heater off + M104 T2 S0 ;extruder heater off + M104 T3 S0 ;extruder heater off + M140 S0 ;heated bed heater off (if you have it) + G91 ;relative positioning + G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure + G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more + G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way + M84 ;steppers off + G90 ;absolute positioning + ;{profile_string} +support_start.gcode = +support_end.gcode = +cool_start.gcode = +cool_end.gcode = +replace.csv = +preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders. + ;This code is added before the T(n) +postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders. + ;This code is added after the T(n) + diff --git a/resources/quickprint/lulzbot_profiles/TAZ_single_extruder_0.5nozzle/XT_high-quality_TAZ_single-extruder_0.5noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ_single_extruder_0.5nozzle/XT_high-quality_TAZ_single-extruder_0.5noz_cura.ini new file mode 100644 index 00000000..5c36622b --- /dev/null +++ b/resources/quickprint/lulzbot_profiles/TAZ_single_extruder_0.5nozzle/XT_high-quality_TAZ_single-extruder_0.5noz_cura.ini @@ -0,0 +1,256 @@ +[profile] +layer_height = 0.14 +wall_thickness = 1.0 +retraction_enable = True +solid_layer_thickness = 0.8 +fill_density = 20 +nozzle_size = 0.5 +print_speed = 50 +print_temperature = 0 +print_temperature2 = 0 +print_temperature3 = 0 +print_temperature4 = 0 +print_bed_temperature = 0 +support = None +platform_adhesion = None +support_dual_extrusion = Both +wipe_tower = False +wipe_tower_volume = 15 +ooze_shield = False +filament_diameter = 2.85 +filament_diameter2 = 0 +filament_diameter3 = 0 +filament_diameter4 = 0 +filament_flow = 100.0 +retraction_speed = 10 +retraction_amount = 1 +retraction_dual_amount = 16.5 +retraction_min_travel = 1.5 +retraction_combing = All +retraction_minimal_extrusion = 0.005 +retraction_hop = 0.1 +bottom_thickness = 0.425 +layer0_width_factor = 125 +object_sink = 0.0 +overlap_dual = 0.15 +travel_speed = 175 +bottom_layer_speed = 8 +infill_speed = 30 +solidarea_speed = 20 +inset0_speed = 20 +insetx_speed = 25 +cool_min_layer_time = 15 +fan_enabled = True +skirt_line_count = 1 +skirt_gap = 3.0 +skirt_minimal_length = 250 +fan_full_height = 0.5 +fan_speed = 50 +fan_speed_max = 70 +cool_min_feedrate = 10 +cool_head_lift = False +solid_top = True +solid_bottom = True +fill_overlap = 15 +support_type = Lines +support_angle = 45 +support_fill_rate = 30 +support_xy_distance = 0.7 +support_z_distance = 0.05 +spiralize = False +simple_mode = False +brim_line_count = 10 +raft_margin = 5.0 +raft_line_spacing = 3.0 +raft_base_thickness = 0.3 +raft_base_linewidth = 1.0 +raft_interface_thickness = 0.27 +raft_interface_linewidth = 0.4 +raft_airgap = 0.5 +raft_surface_layers = 2 +fix_horrible_union_all_type_a = True +fix_horrible_union_all_type_b = False +fix_horrible_use_open_bits = False +fix_horrible_extensive_stitching = False +plugin_config = (lp1 + . +object_center_x = -1 +object_center_y = -1 + +[alterations] +start.gcode = ;Sliced at: {day} {date} {time} + ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} + ;Print time: {print_time} + ;Filament used: {filament_amount}m {filament_weight}g + ;Filament cost: {filament_cost} + ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line + ;M109 S{print_temperature} ;Uncomment to add your own temperature line + G21 ;metric values + G90 ;absolute positioning + M82 ;set extruder to absolute mode + M107 ;start with the fan off + G28 X0 Y0 ;move X/Y to min endstops + G28 Z0 ;move Z to min endstops + G1 Z15.0 F{travel_speed};move the platform down 15mm + G92 E0 ; zero the extruded length + G1 F200 E0 ; extrude 3mm of feed stock + G92 E0 ; zero the extruded length again + G1 F{travel_speed} ; set travel speed + M203 X192 Y208 Z3 ; speed limits + M117 Printing... ; send message to LCD +end.gcode = M400 + M104 S0 ; hotend off + M140 S0 ; heated bed heater off (if you have it) + M107 ; fans off + G91 ; relative positioning + G1 E-1 F300 ; retract the filament a bit before lifting the nozzle, to release some of the pressure + G1 Z+0.5 E-5 X-20 Y-20 F3000 ; move Z up a bit and retract filament even more + G90 ; absolute positioning + G1 X0 Y250 ; move to cooling position + M84 ; steppers off + G90 ; absolute positioning + M117 TAZ Ready. + ;{profile_string} +start2.gcode = ;Sliced at: {day} {date} {time} + ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} + ;Print time: {print_time} + ;Filament used: {filament_amount}m {filament_weight}g + ;Filament cost: {filament_cost} + ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line + ;M104 S{print_temperature} ;Uncomment to add your own temperature line + ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line + ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line + G21 ;metric values + G90 ;absolute positioning + M107 ;start with the fan off + G28 X0 Y0 ;move X/Y to min endstops + G28 Z0 ;move Z to min endstops + G1 Z15.0 F{travel_speed} ;move the platform down 15mm + T1 ;Switch to the 2nd extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F200 E-{retraction_dual_amount} + T0 ;Switch to the first extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F{travel_speed} + ;Put printing message on LCD screen + M117 Printing... +end2.gcode = ;End GCode + M104 T0 S0 ;extruder heater off + M104 T1 S0 ;extruder heater off + M140 S0 ;heated bed heater off (if you have it) + G91 ;relative positioning + G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure + G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more + G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way + M84 ;steppers off + G90 ;absolute positioning + ;{profile_string} +start3.gcode = ;Sliced at: {day} {date} {time} + ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} + ;Print time: {print_time} + ;Filament used: {filament_amount}m {filament_weight}g + ;Filament cost: {filament_cost} + ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line + ;M104 S{print_temperature} ;Uncomment to add your own temperature line + ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line + ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line + G21 ;metric values + G90 ;absolute positioning + M107 ;start with the fan off + G28 X0 Y0 ;move X/Y to min endstops + G28 Z0 ;move Z to min endstops + G1 Z15.0 F{travel_speed} ;move the platform down 15mm + T2 ;Switch to the 2nd extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F200 E-{retraction_dual_amount} + T1 ;Switch to the 2nd extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F200 E-{retraction_dual_amount} + T0 ;Switch to the first extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F{travel_speed} + ;Put printing message on LCD screen + M117 Printing... +end3.gcode = ;End GCode + M104 T0 S0 ;extruder heater off + M104 T1 S0 ;extruder heater off + M104 T2 S0 ;extruder heater off + M140 S0 ;heated bed heater off (if you have it) + G91 ;relative positioning + G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure + G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more + G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way + M84 ;steppers off + G90 ;absolute positioning + ;{profile_string} +start4.gcode = ;Sliced at: {day} {date} {time} + ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} + ;Print time: {print_time} + ;Filament used: {filament_amount}m {filament_weight}g + ;Filament cost: {filament_cost} + ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line + ;M104 S{print_temperature} ;Uncomment to add your own temperature line + ;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line + ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line + ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line + G21 ;metric values + G90 ;absolute positioning + M107 ;start with the fan off + G28 X0 Y0 ;move X/Y to min endstops + G28 Z0 ;move Z to min endstops + G1 Z15.0 F{travel_speed} ;move the platform down 15mm + T3 ;Switch to the 4th extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F200 E-{retraction_dual_amount} + T2 ;Switch to the 3th extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F200 E-{retraction_dual_amount} + T1 ;Switch to the 2nd extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F200 E-{retraction_dual_amount} + T0 ;Switch to the first extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F{travel_speed} + ;Put printing message on LCD screen + M117 Printing... +end4.gcode = ;End GCode + M104 T0 S0 ;extruder heater off + M104 T1 S0 ;extruder heater off + M104 T2 S0 ;extruder heater off + M104 T3 S0 ;extruder heater off + M140 S0 ;heated bed heater off (if you have it) + G91 ;relative positioning + G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure + G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more + G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way + M84 ;steppers off + G90 ;absolute positioning + ;{profile_string} +support_start.gcode = +support_end.gcode = +cool_start.gcode = +cool_end.gcode = +replace.csv = +preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders. + ;This code is added before the T(n) +postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders. + ;This code is added after the T(n) + diff --git a/resources/quickprint/lulzbot_profiles/TAZ_single_extruder_0.5nozzle/XT_high-speed_TAZ_single-extruder_0.5noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ_single_extruder_0.5nozzle/XT_high-speed_TAZ_single-extruder_0.5noz_cura.ini new file mode 100644 index 00000000..74cae0fc --- /dev/null +++ b/resources/quickprint/lulzbot_profiles/TAZ_single_extruder_0.5nozzle/XT_high-speed_TAZ_single-extruder_0.5noz_cura.ini @@ -0,0 +1,256 @@ +[profile] +layer_height = 0.38 +wall_thickness = 1.0 +retraction_enable = True +solid_layer_thickness = 0.8 +fill_density = 20 +nozzle_size = 0.5 +print_speed = 50 +print_temperature = 0 +print_temperature2 = 0 +print_temperature3 = 0 +print_temperature4 = 0 +print_bed_temperature = 0 +support = None +platform_adhesion = None +support_dual_extrusion = Both +wipe_tower = False +wipe_tower_volume = 15 +ooze_shield = False +filament_diameter = 2.85 +filament_diameter2 = 0 +filament_diameter3 = 0 +filament_diameter4 = 0 +filament_flow = 100.0 +retraction_speed = 10 +retraction_amount = 1 +retraction_dual_amount = 16.5 +retraction_min_travel = 1.5 +retraction_combing = All +retraction_minimal_extrusion = 0.005 +retraction_hop = 0.1 +bottom_thickness = 0.425 +layer0_width_factor = 125 +object_sink = 0.0 +overlap_dual = 0.15 +travel_speed = 175 +bottom_layer_speed = 15 +infill_speed = 60 +solidarea_speed = 50 +inset0_speed = 50 +insetx_speed = 55 +cool_min_layer_time = 15 +fan_enabled = True +skirt_line_count = 1 +skirt_gap = 3.0 +skirt_minimal_length = 250 +fan_full_height = 0.5 +fan_speed = 50 +fan_speed_max = 70 +cool_min_feedrate = 10 +cool_head_lift = False +solid_top = True +solid_bottom = True +fill_overlap = 15 +support_type = Lines +support_angle = 45 +support_fill_rate = 30 +support_xy_distance = 0.7 +support_z_distance = 0.05 +spiralize = False +simple_mode = False +brim_line_count = 10 +raft_margin = 5.0 +raft_line_spacing = 3.0 +raft_base_thickness = 0.3 +raft_base_linewidth = 1.0 +raft_interface_thickness = 0.27 +raft_interface_linewidth = 0.4 +raft_airgap = 0.5 +raft_surface_layers = 2 +fix_horrible_union_all_type_a = True +fix_horrible_union_all_type_b = False +fix_horrible_use_open_bits = False +fix_horrible_extensive_stitching = False +plugin_config = (lp1 + . +object_center_x = -1 +object_center_y = -1 + +[alterations] +start.gcode = ;Sliced at: {day} {date} {time} + ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} + ;Print time: {print_time} + ;Filament used: {filament_amount}m {filament_weight}g + ;Filament cost: {filament_cost} + ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line + ;M109 S{print_temperature} ;Uncomment to add your own temperature line + G21 ;metric values + G90 ;absolute positioning + M82 ;set extruder to absolute mode + M107 ;start with the fan off + G28 X0 Y0 ;move X/Y to min endstops + G28 Z0 ;move Z to min endstops + G1 Z15.0 F{travel_speed};move the platform down 15mm + G92 E0 ; zero the extruded length + G1 F200 E0 ; extrude 3mm of feed stock + G92 E0 ; zero the extruded length again + G1 F{travel_speed} ; set travel speed + M203 X192 Y208 Z3 ; speed limits + M117 Printing... ; send message to LCD +end.gcode = M400 + M104 S0 ; hotend off + M140 S0 ; heated bed heater off (if you have it) + M107 ; fans off + G91 ; relative positioning + G1 E-1 F300 ; retract the filament a bit before lifting the nozzle, to release some of the pressure + G1 Z+0.5 E-5 X-20 Y-20 F3000 ; move Z up a bit and retract filament even more + G90 ; absolute positioning + G1 X0 Y250 ; move to cooling position + M84 ; steppers off + G90 ; absolute positioning + M117 TAZ Ready. + ;{profile_string} +start2.gcode = ;Sliced at: {day} {date} {time} + ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} + ;Print time: {print_time} + ;Filament used: {filament_amount}m {filament_weight}g + ;Filament cost: {filament_cost} + ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line + ;M104 S{print_temperature} ;Uncomment to add your own temperature line + ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line + ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line + G21 ;metric values + G90 ;absolute positioning + M107 ;start with the fan off + G28 X0 Y0 ;move X/Y to min endstops + G28 Z0 ;move Z to min endstops + G1 Z15.0 F{travel_speed} ;move the platform down 15mm + T1 ;Switch to the 2nd extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F200 E-{retraction_dual_amount} + T0 ;Switch to the first extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F{travel_speed} + ;Put printing message on LCD screen + M117 Printing... +end2.gcode = ;End GCode + M104 T0 S0 ;extruder heater off + M104 T1 S0 ;extruder heater off + M140 S0 ;heated bed heater off (if you have it) + G91 ;relative positioning + G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure + G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more + G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way + M84 ;steppers off + G90 ;absolute positioning + ;{profile_string} +start3.gcode = ;Sliced at: {day} {date} {time} + ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} + ;Print time: {print_time} + ;Filament used: {filament_amount}m {filament_weight}g + ;Filament cost: {filament_cost} + ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line + ;M104 S{print_temperature} ;Uncomment to add your own temperature line + ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line + ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line + G21 ;metric values + G90 ;absolute positioning + M107 ;start with the fan off + G28 X0 Y0 ;move X/Y to min endstops + G28 Z0 ;move Z to min endstops + G1 Z15.0 F{travel_speed} ;move the platform down 15mm + T2 ;Switch to the 2nd extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F200 E-{retraction_dual_amount} + T1 ;Switch to the 2nd extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F200 E-{retraction_dual_amount} + T0 ;Switch to the first extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F{travel_speed} + ;Put printing message on LCD screen + M117 Printing... +end3.gcode = ;End GCode + M104 T0 S0 ;extruder heater off + M104 T1 S0 ;extruder heater off + M104 T2 S0 ;extruder heater off + M140 S0 ;heated bed heater off (if you have it) + G91 ;relative positioning + G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure + G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more + G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way + M84 ;steppers off + G90 ;absolute positioning + ;{profile_string} +start4.gcode = ;Sliced at: {day} {date} {time} + ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} + ;Print time: {print_time} + ;Filament used: {filament_amount}m {filament_weight}g + ;Filament cost: {filament_cost} + ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line + ;M104 S{print_temperature} ;Uncomment to add your own temperature line + ;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line + ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line + ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line + G21 ;metric values + G90 ;absolute positioning + M107 ;start with the fan off + G28 X0 Y0 ;move X/Y to min endstops + G28 Z0 ;move Z to min endstops + G1 Z15.0 F{travel_speed} ;move the platform down 15mm + T3 ;Switch to the 4th extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F200 E-{retraction_dual_amount} + T2 ;Switch to the 3th extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F200 E-{retraction_dual_amount} + T1 ;Switch to the 2nd extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F200 E-{retraction_dual_amount} + T0 ;Switch to the first extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F{travel_speed} + ;Put printing message on LCD screen + M117 Printing... +end4.gcode = ;End GCode + M104 T0 S0 ;extruder heater off + M104 T1 S0 ;extruder heater off + M104 T2 S0 ;extruder heater off + M104 T3 S0 ;extruder heater off + M140 S0 ;heated bed heater off (if you have it) + G91 ;relative positioning + G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure + G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more + G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way + M84 ;steppers off + G90 ;absolute positioning + ;{profile_string} +support_start.gcode = +support_end.gcode = +cool_start.gcode = +cool_end.gcode = +replace.csv = +preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders. + ;This code is added before the T(n) +postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders. + ;This code is added after the T(n) + diff --git a/resources/quickprint/lulzbot_profiles/TAZ_single_extruder_0.5nozzle/XT_medium-quality_TAZ_single-extruder_0.5noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ_single_extruder_0.5nozzle/XT_medium-quality_TAZ_single-extruder_0.5noz_cura.ini new file mode 100644 index 00000000..93953143 --- /dev/null +++ b/resources/quickprint/lulzbot_profiles/TAZ_single_extruder_0.5nozzle/XT_medium-quality_TAZ_single-extruder_0.5noz_cura.ini @@ -0,0 +1,256 @@ +[profile] +layer_height = 0.25 +wall_thickness = 1.0 +retraction_enable = True +solid_layer_thickness = 0.8 +fill_density = 20 +nozzle_size = 0.5 +print_speed = 50 +print_temperature = 0 +print_temperature2 = 0 +print_temperature3 = 0 +print_temperature4 = 0 +print_bed_temperature = 0 +support = None +platform_adhesion = None +support_dual_extrusion = Both +wipe_tower = False +wipe_tower_volume = 15 +ooze_shield = False +filament_diameter = 2.85 +filament_diameter2 = 0 +filament_diameter3 = 0 +filament_diameter4 = 0 +filament_flow = 100.0 +retraction_speed = 10 +retraction_amount = 1 +retraction_dual_amount = 16.5 +retraction_min_travel = 1.5 +retraction_combing = All +retraction_minimal_extrusion = 0.005 +retraction_hop = 0.1 +bottom_thickness = 0.425 +layer0_width_factor = 125 +object_sink = 0.0 +overlap_dual = 0.15 +travel_speed = 175 +bottom_layer_speed = 10 +infill_speed = 40 +solidarea_speed = 35 +inset0_speed = 35 +insetx_speed = 37 +cool_min_layer_time = 15 +fan_enabled = True +skirt_line_count = 1 +skirt_gap = 3.0 +skirt_minimal_length = 250 +fan_full_height = 0.5 +fan_speed = 50 +fan_speed_max = 70 +cool_min_feedrate = 10 +cool_head_lift = False +solid_top = True +solid_bottom = True +fill_overlap = 15 +support_type = Lines +support_angle = 45 +support_fill_rate = 30 +support_xy_distance = 0.7 +support_z_distance = 0.05 +spiralize = False +simple_mode = False +brim_line_count = 10 +raft_margin = 5.0 +raft_line_spacing = 3.0 +raft_base_thickness = 0.3 +raft_base_linewidth = 1.0 +raft_interface_thickness = 0.27 +raft_interface_linewidth = 0.4 +raft_airgap = 0.5 +raft_surface_layers = 2 +fix_horrible_union_all_type_a = True +fix_horrible_union_all_type_b = False +fix_horrible_use_open_bits = False +fix_horrible_extensive_stitching = False +plugin_config = (lp1 + . +object_center_x = -1 +object_center_y = -1 + +[alterations] +start.gcode = ;Sliced at: {day} {date} {time} + ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} + ;Print time: {print_time} + ;Filament used: {filament_amount}m {filament_weight}g + ;Filament cost: {filament_cost} + ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line + ;M109 S{print_temperature} ;Uncomment to add your own temperature line + G21 ;metric values + G90 ;absolute positioning + M82 ;set extruder to absolute mode + M107 ;start with the fan off + G28 X0 Y0 ;move X/Y to min endstops + G28 Z0 ;move Z to min endstops + G1 Z15.0 F{travel_speed};move the platform down 15mm + G92 E0 ; zero the extruded length + G1 F200 E0 ; extrude 3mm of feed stock + G92 E0 ; zero the extruded length again + G1 F{travel_speed} ; set travel speed + M203 X192 Y208 Z3 ; speed limits + M117 Printing... ; send message to LCD +end.gcode = M400 + M104 S0 ; hotend off + M140 S0 ; heated bed heater off (if you have it) + M107 ; fans off + G91 ; relative positioning + G1 E-1 F300 ; retract the filament a bit before lifting the nozzle, to release some of the pressure + G1 Z+0.5 E-5 X-20 Y-20 F3000 ; move Z up a bit and retract filament even more + G90 ; absolute positioning + G1 X0 Y250 ; move to cooling position + M84 ; steppers off + G90 ; absolute positioning + M117 TAZ Ready. + ;{profile_string} +start2.gcode = ;Sliced at: {day} {date} {time} + ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} + ;Print time: {print_time} + ;Filament used: {filament_amount}m {filament_weight}g + ;Filament cost: {filament_cost} + ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line + ;M104 S{print_temperature} ;Uncomment to add your own temperature line + ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line + ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line + G21 ;metric values + G90 ;absolute positioning + M107 ;start with the fan off + G28 X0 Y0 ;move X/Y to min endstops + G28 Z0 ;move Z to min endstops + G1 Z15.0 F{travel_speed} ;move the platform down 15mm + T1 ;Switch to the 2nd extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F200 E-{retraction_dual_amount} + T0 ;Switch to the first extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F{travel_speed} + ;Put printing message on LCD screen + M117 Printing... +end2.gcode = ;End GCode + M104 T0 S0 ;extruder heater off + M104 T1 S0 ;extruder heater off + M140 S0 ;heated bed heater off (if you have it) + G91 ;relative positioning + G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure + G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more + G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way + M84 ;steppers off + G90 ;absolute positioning + ;{profile_string} +start3.gcode = ;Sliced at: {day} {date} {time} + ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} + ;Print time: {print_time} + ;Filament used: {filament_amount}m {filament_weight}g + ;Filament cost: {filament_cost} + ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line + ;M104 S{print_temperature} ;Uncomment to add your own temperature line + ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line + ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line + G21 ;metric values + G90 ;absolute positioning + M107 ;start with the fan off + G28 X0 Y0 ;move X/Y to min endstops + G28 Z0 ;move Z to min endstops + G1 Z15.0 F{travel_speed} ;move the platform down 15mm + T2 ;Switch to the 2nd extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F200 E-{retraction_dual_amount} + T1 ;Switch to the 2nd extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F200 E-{retraction_dual_amount} + T0 ;Switch to the first extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F{travel_speed} + ;Put printing message on LCD screen + M117 Printing... +end3.gcode = ;End GCode + M104 T0 S0 ;extruder heater off + M104 T1 S0 ;extruder heater off + M104 T2 S0 ;extruder heater off + M140 S0 ;heated bed heater off (if you have it) + G91 ;relative positioning + G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure + G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more + G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way + M84 ;steppers off + G90 ;absolute positioning + ;{profile_string} +start4.gcode = ;Sliced at: {day} {date} {time} + ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} + ;Print time: {print_time} + ;Filament used: {filament_amount}m {filament_weight}g + ;Filament cost: {filament_cost} + ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line + ;M104 S{print_temperature} ;Uncomment to add your own temperature line + ;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line + ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line + ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line + G21 ;metric values + G90 ;absolute positioning + M107 ;start with the fan off + G28 X0 Y0 ;move X/Y to min endstops + G28 Z0 ;move Z to min endstops + G1 Z15.0 F{travel_speed} ;move the platform down 15mm + T3 ;Switch to the 4th extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F200 E-{retraction_dual_amount} + T2 ;Switch to the 3th extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F200 E-{retraction_dual_amount} + T1 ;Switch to the 2nd extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F200 E-{retraction_dual_amount} + T0 ;Switch to the first extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F{travel_speed} + ;Put printing message on LCD screen + M117 Printing... +end4.gcode = ;End GCode + M104 T0 S0 ;extruder heater off + M104 T1 S0 ;extruder heater off + M104 T2 S0 ;extruder heater off + M104 T3 S0 ;extruder heater off + M140 S0 ;heated bed heater off (if you have it) + G91 ;relative positioning + G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure + G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more + G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way + M84 ;steppers off + G90 ;absolute positioning + ;{profile_string} +support_start.gcode = +support_end.gcode = +cool_start.gcode = +cool_end.gcode = +replace.csv = +preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders. + ;This code is added before the T(n) +postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders. + ;This code is added after the T(n) + diff --git a/scripts/recreate_lulzbot_profiles.py b/scripts/recreate_lulzbot_profiles.py old mode 100755 new mode 100644 index cbee951f..1f609622 --- a/scripts/recreate_lulzbot_profiles.py +++ b/scripts/recreate_lulzbot_profiles.py @@ -3,7 +3,7 @@ # This script is used to generate print profiles for lulzbot printers # based off of the lulzbot_profiles directory which contains common # profiles for multiple toolheads. -# To generate profiles or update them, run the script from the root Cura +# To update profiles, run the script from the root Cura # directory with ./scripts/recreate_lulzbot_profiles.py # @@ -49,14 +49,19 @@ material_map = { "Laybrick" : "laybrick", "PP-Iron": "protopasta-magnetic-iron", "PP-Steel": "protopasta-stainless-steel", + "Bamboofill": "bamboofill", + "Woodfill": "woodfill", # Advanced "Alloy910": "alloy910", "Bridge": "bridge", "Laywood": "laywood", "n-vent": "n-vent", + "XT": "XT", "PCTPE": "PCTPE", "PC-ABS": "PC-ABS", "T-Glase": "t-glase", + "Bronzefill": "bronzefill", + "Copperfill": "copperfill", # Expert "PP-Conductive": "protopasta-conductive-PLA", "HIPS_VP" : "HIPS", @@ -75,10 +80,7 @@ material_map = { "ABS_semiflex" : "ABS-semiflex", # Others - # bamboofill # b-pet - # bronzefill - # copperfill # tritan # PLA-protopasta-conductive-PLA } @@ -93,14 +95,19 @@ material_order = { "Laybrick" : 11, "PP-Iron": 12, "PP-Steel": 13, + "Bamboofill":14, + "Woodfill":15, # Advanced "Alloy910": 50, "Bridge": 51, "Laywood": 52, "n-vent": 53, - "PCTPE": 54, - "PC-ABS": 55, - "T-Glase": 56, + "XT": 54, + "PCTPE": 55, + "PC-ABS": 56, + "T-Glase": 57, + "Bronzefill":58, + "Copperfill":59, # Expert "PP-Conductive": 500, "HIPS_VP" : 501, @@ -129,14 +136,19 @@ material_types = { "Laybrick" : "Intermediate", "PP-Iron": "Intermediate", "PP-Steel": "Intermediate", + "Bamboofill": "Intermediate", + "Woodfill": "Intermediate", # Advanced "Alloy910": "Advanced", "Bridge": "Advanced", "Laywood": "Advanced", "n-vent": "Advanced", + "XT": "Advanced", "PCTPE": "Advanced", "PC-ABS": "Advanced", "T-Glase": "Advanced", + "Bronzefill": "Advanced", + "Copperfill": "Advanced", # Expert "PP-Conductive": "Expert", "HIPS_VP" : "Expert", @@ -165,14 +177,19 @@ material_names = { "Laybrick" : "Laybrick (CC-Products)", "PP-Iron": "Magnetic (Proto-pasta)", "PP-Steel": "Steel PLA (Proto-pasta)", + "Bamboofill": "Bamboofill (Colorfabb)", + "Woodfill": "Woodfill (Colorfabb)", # Advanced "Alloy910": "Alloy 910 (Taulman)", "Bridge": "Bridge Nylon (Taulman)", "Laywood": "Laywoo-D3 (CC-Products)", "n-vent": "n-vent (Taulman)", + "XT": "XT (Colorfabb)", "PCTPE": "PCTPE (Taulman)", "PC-ABS": "PC-ABS (Proto-pasta)", "T-Glase": "t-glase (Taulman)", + "Bronzefill": "Bronzefill (Colorfabb)", + "Copperfill": "Copperfill (Colorfabb)", # Expert "PP-Conductive": "Conductive (Proto-pasta)", "HIPS_VP" : "HIPS (Village Plastics)", @@ -197,6 +214,7 @@ bed_prep_materials = { "Alloy910", "Bridge", "n-vent", + "XT", "PCTPE", "T-Glase", "618-Nylon", @@ -214,14 +232,19 @@ material_url = { "Laybrick" : "www.lulzbot.com/products/laybrick-filament-3mm", "PP-Iron": "www.lulzbot.com/products/magnetic-iron-pla-3mm-filament-500g-reel-proto-pasta", "PP-Steel": "www.lulzbot.com/products/stainless-steel-pla-3mm-filament-500g-reel-proto-pasta", +# "Bamboofill": "", +# "Woodfill": "", # Advanced "Alloy910": "www.lulzbot.com/products/alloy-910-3mm-filament-1lb-reel-taulman", "Bridge": "www.lulzbot.com/products/taulman-bridge-nylon-3mm-filament-1-pound", "Laywood": "www.lulzbot.com/products/laywoo-d3-cherry-laywood-3mm-250g-coil-cc-products", "n-vent": "www.lulzbot.com/products/n-vent-3mm-filament-1lb-taulman", +# "XT": "", "PCTPE": "www.lulzbot.com/products/taulman-pctpe-3mm-filament-1-pound", "PC-ABS": "www.lulzbot.com/products/pc-abs-alloy-3mm-filament-500g-reel-proto-pasta", "T-Glase": "www.lulzbot.com/products/t-glase-3mm-filament-1lb-reel", +# "Bronzefill": "", +# "Copperfill": "", # Expert "PP-Conductive": "www.lulzbot.com/products/conductive-pla-3mm-filament-500g-reel-proto-pasta", "HIPS_VP" : "www.lulzbot.com/products/hips-3mm-filament-1kg-or-5lb-reel-village-plastics",