From: Steven Abadie Date: Mon, 3 Nov 2014 05:07:15 +0000 (-0700) Subject: Fixed a number of Mini start and end gcode settings. X-Git-Tag: 14.09-1.18~72 X-Git-Url: http://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?a=commitdiff_plain;h=742f20e0739ed4ff15e45152313a0a8e501514fd;p=cura.git Fixed a number of Mini start and end gcode settings. Mini simpleMode PLA start gcode is now updated with the correct wipe location. Also removed a skirt setting for HIPS normal that created more than one skirt. Close #32 --- diff --git a/Cura/gui/simpleMode.py b/Cura/gui/simpleMode.py index 0dceff4a..bd98a107 100644 --- a/Cura/gui/simpleMode.py +++ b/Cura/gui/simpleMode.py @@ -101,18 +101,17 @@ class simpleModePanel(wx.Panel): put('layer0_width_factor', '125') put('cool_min_layer_time', '15') put('cool_head_lift', 'True') - put('end.gcode', """;End GCode - M400 - M104 S0 ; Hotend off - M140 S0 ; heated bed heater off (if you have it) - M107 ; fans off - G92 E0 ; set extruder to 0 - G1 E-3 F300 ; retract a bit to relieve pressure - G1 X5 Y5 Z156 F10000 ; move to cooling positioning - M190 R60 ; wait for bed to cool + put('end.gcode', """M400 + M104 S0 ; Hotend off + M140 S0 ; heated bed heater off (if you have it) + M107 ; fans off + G92 E0 ; set extruder to 0 + G1 E-3 F300 ; retract a bit to relieve pressure + G1 X5 Y5 Z156 F10000 ; move to cooling positioning + M190 R60 ; wait for bed to cool G1 X145 Y175 Z156 F1000 ; move to cooling positioning - M84 ; steppers off - G90 ; absolute positioning + M84 ; steppers off + G90 ; absolute positioning ;{profile_string}""") if self.printMaterialHIPS.GetValue() or self.printMaterialABS.GetValue(): @@ -237,7 +236,6 @@ class simpleModePanel(wx.Panel): put('infill_speed', '85') put('inset0_speed', '45') put('insetx_speed', '50') - put('skirt_minimal_length', '200') if self.printTypeHigh.GetValue(): put('layer_height', '0.14') put('print_speed', '30') @@ -299,34 +297,34 @@ class simpleModePanel(wx.Panel): M109 S130 ; set to cleaning temp and wait G1 Z150 E-45 F200 ; suck up XXmm of filament M109 S140 ; heat up rest of way - G1 X45 Y178 F11520 ; move behind scraper - G1 Z0 F1200 ; CRITICAL: set Z to height of top of scraper - G1 X45 Y178 Z-1 F4000 ; wiping ; plunge into wipe pad - G1 X55 Y176 Z-.5 F4000 ; wiping - G1 X45 Y178 F4000 ; wiping - G1 X55 Y176 F4000 ; wiping - G1 X45 Y178 F4000 ; wiping - G1 X55 Y176 F4000 ; wiping - G1 X45 Y178 F4000 ; wiping - G1 X55 Y176 F4000 ; wiping - G1 X60 Y178 F4000 ; wiping - G1 X80 Y176 F4000 ; wiping - G1 X60 Y178 F4000 ; wiping - G1 X80 Y176 F4000 ; wiping - G1 X60 Y178 F4000 ; wiping - G1 X90 Y176 F4000 ; wiping - G1 X80 Y178 F4000 ; wiping - G1 X100 Y176 F4000 ; wiping - G1 X80 Y178 F4000 ; wiping - G1 X100 Y176 F4000 ; wiping - G1 X80 Y178 F4000 ; wiping - G1 X100 Y176 F4000 ; wiping - G1 X110 Y178 F4000 ; wiping - G1 X100 Y176 F4000 ; wiping - G1 X110 Y178 F4000 ; wiping - G1 X100 Y176 F4000 ; wiping - G1 X110 Y178 F4000 ; wiping - G1 X115 Y175 Z-1.5 F1000 ; wipe slower and bury noz in cleanish area + G1 X45 Y174 F11520 ; move behind scraper + G1 Z0 F1200 ; CRITICAL: set Z to height of top of scraper + G1 X45 Y174 Z-.5 F4000 ; wiping ; plunge into wipe pad + G1 X55 Y172 Z-.5 F4000 ; wiping + G1 X45 Y174 Z0 F4000 ; wiping + G1 X55 Y172 F4000 ; wiping + G1 X45 Y174 F4000 ; wiping + G1 X55 Y172 F4000 ; wiping + G1 X45 Y174 F4000 ; wiping + G1 X55 Y172 F4000 ; wiping + G1 X60 Y174 F4000 ; wiping + G1 X80 Y172 F4000 ; wiping + G1 X60 Y174 F4000 ; wiping + G1 X80 Y172 F4000 ; wiping + G1 X60 Y174 F4000 ; wiping + G1 X90 Y172 F4000 ; wiping + G1 X80 Y174 F4000 ; wiping + G1 X100 Y172 F4000 ; wiping + G1 X80 Y174 F4000 ; wiping + G1 X100 Y172 F4000 ; wiping + G1 X80 Y174 F4000 ; wiping + G1 X100 Y172 F4000 ; wiping + G1 X110 Y174 F4000 ; wiping + G1 X100 Y172 F4000 ; wiping + G1 X110 Y174 F4000 ; wiping + G1 X100 Y172 F4000 ; wiping + G1 X110 Y174 F4000 ; wiping + G1 X115 Y172 Z-0.5 F1000 ; wipe slower and bury noz in cleanish area G1 Z10 ; raise z G28 X0 Y0 ; home x and y M109 S140 ; set to probing temp @@ -335,17 +333,7 @@ class simpleModePanel(wx.Panel): M109 S190 ; set extruder temp and wait G1 Z2 E5 F200 ; extrude filament back into nozzle M140 S65 ; get bed temping up during first layer - M206 X0.0 Y0.0 Z0.0 ; offset home position for fine tuning -end.gcode = M104 S0 - M140 S0 ;heated bed heater off (if you have it) - M107 ; fans off - G91 ;relative positioning - G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure - G1 Z+0.5 E-5 X-20 Y-20 F3000 ;move Z up a bit and retract filament even more - G1 X155 Y175 Z156 F10000 ;move X/Y to min endstops, so the head is out of the way - M84 ;steppers off - G90 ;absolute positioning - ;{profile_string}""") + M206 X0.0 Y0.0 Z0.0 ; offset home position for fine tuning""") put("end.gcode", """M400 M104 S0 ; Hotend off M140 S0 ; heated bed heater off (if you have it)