From: nickthetait Date: Tue, 24 Nov 2015 19:38:29 +0000 (-0700) Subject: Update a print profile X-Git-Url: http://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?a=commitdiff_plain;h=717dcaa4c6cd00314542ff8959af221082784571;p=cura.git Update a print profile --- diff --git a/resources/quickprint/lulzbot_profiles/TAZ6_single_tilapia/PLA_medium-quality_mangrove_single-extruder_0.5noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ6_single_tilapia/PLA_medium-quality_mangrove_single-extruder_0.5noz_cura.ini index 70cd1330..78f73af9 100644 --- a/resources/quickprint/lulzbot_profiles/TAZ6_single_tilapia/PLA_medium-quality_mangrove_single-extruder_0.5noz_cura.ini +++ b/resources/quickprint/lulzbot_profiles/TAZ6_single_tilapia/PLA_medium-quality_mangrove_single-extruder_0.5noz_cura.ini @@ -48,8 +48,8 @@ skirt_line_count = 1 skirt_gap = 3.0 skirt_minimal_length = 250 fan_full_height = 0.5 -fan_speed = 40 -fan_speed_max = 60 +fan_speed = 60 +fan_speed_max = 100 cool_min_feedrate = 10 cool_head_lift = False solid_top = True @@ -99,7 +99,6 @@ start.gcode = G21 G28 ; home all M109 S130 ; set to cleaning temp and wait G1 E-30 F100 ; suck up XXmm of filament - M109 S140 ; heat to probe temp G1 X-15 Y100 F3000 ; move above wiper pad G1 Z2 ; Push nozzle into wiper G1 X-17 Y95 F1000 ; slow wipe @@ -125,9 +124,9 @@ start.gcode = G21 G1 X-17 Y30 F2000 ; fast wipe G1 X-15 Y25 Z1.5 F1000 ; slow wipe G1 X-17 Y23 F1000 ; slow wipe + M109 S140 ; heat to probe temp G1 Z10 ; raise extruder - G1 Y10 ; move above probe - M109 S170 ; set to probing temp + G1 X-11 Y-8 ; move above probe M204 S100 ; set accel for probing G29 ; Probe M204 S700 ; set accel back to normal