From: Ian Jackson <ijackson@chiark.greenend.org.uk>
Date: Wed, 31 Dec 2014 14:23:54 +0000 (+0000)
Subject: knifeblock: peg
X-Git-Tag: filamentspool-v2-release~262
X-Git-Url: http://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?a=commitdiff_plain;h=65d1fbff98e91c996b7c27d8cbea3c7010952f5b;hp=ff667b2d30a8c7c2e6f896b6eb47c9bbd162c2be;p=reprap-play.git

knifeblock: peg
---

diff --git a/knifeblock.scad b/knifeblock.scad
index fb8ff66..6d7e96a 100644
--- a/knifeblock.scad
+++ b/knifeblock.scad
@@ -36,6 +36,14 @@ covertopwing = 15;
 covertopwingbase = 20;
 coveredge = 3;
 
+pegstem = 3.5;
+peghead = 10;
+pegstemheight = 2;
+pegheight = 9;
+peglen = 12;
+
+pegslop = 0.5;
+
 // computed
 side = minsidein + screwcsinkdia + minsideout;
 totaldepth = front + maxhandledepth + back;
@@ -135,6 +143,33 @@ module CoverSide(xpos, len){
   }
 }
 
+module PegTemplate(){
+  for (mx=[0,1]) for (my=[0,1]) {
+      mirror([mx,0,0]) mirror([0,my,0])
+	polygon([[-0.1,      -0.1],
+		 [pegstem/2, -0.1],
+		 [pegstem/2, pegstemheight/2],
+		 [peghead/2, pegheight    /2],
+		 [-0.1,      pegheight    /2]]);
+    }
+}
+
+module Peg(){
+  echo("peg angle slope (must be <1)",
+       (peghead-pegstem)/(pegheight-pegstemheight));
+  d = pegslop;
+  rotate([90,0,0]) {
+    linear_extrude(height=peglen) {
+      intersection(){
+	translate([-d,-d,0]) PegTemplate();
+	translate([-d,+d,0]) PegTemplate();
+	translate([+d,+d,0]) PegTemplate();
+	translate([+d,-d,0]) PegTemplate();
+      }
+    }
+  }
+}
+
 module Cover(){
   CoverTemplate();
   CoverSide(minx,           covershortlen);