From: Erik van der Zalm Date: Sun, 4 Mar 2012 12:41:47 +0000 (+0100) Subject: merging with SCUBA82 X-Git-Tag: iwj-success-2012-07-29~70 X-Git-Url: http://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?a=commitdiff_plain;h=632528aa95872018575ac93cded2c11c882b196c;p=marlin.git merging with SCUBA82 --- 632528aa95872018575ac93cded2c11c882b196c diff --cc Marlin/language.h index 0f1315a,fade6cd..dd32082 --- a/Marlin/language.h +++ b/Marlin/language.h @@@ -23,10 -88,11 +23,11 @@@ #define MSG_DISABLE_STEPPERS " Disable Steppers" #define MSG_AUTO_HOME " Auto Home" #define MSG_SET_ORIGIN " Set Origin" - #define MSG_PREHEAT " Preheat" #define MSG_COOLDOWN " Cooldown" #define MSG_EXTRUDE " Extrude" + #define MSG_PREHEAT_PLA " Preheat PLA" + #define MSG_PREHEAT_ABS " Preheat ABS" - #define MSG_MOVE_AXIS " Move Axis \x7E" + #define MSG_MOVE_AXIS " Move Axis \x7E" #define MSG_SPEED " Speed:" #define MSG_NOZZLE " \002Nozzle:" #define MSG_BED " \002Bed:" @@@ -153,31 -212,31 +154,32 @@@ // LCD Menu Messages - #define WELCOME_MSG "RepRap bereit" - #define MSG_SD_INSERTED "SDKarte bereit" - #define MSG_SD_REMOVED "SDKarte entfernt" + #define WELCOME_MSG "UltiMARLIN Ready." + + #define MSG_SD_INSERTED "Card inserted" + #define MSG_SD_REMOVED "Card removed" #define MSG_MAIN " Main \003" #define MSG_AUTOSTART " Autostart" - #define MSG_DISABLE_STEPPERS " Disable Steppers" - #define MSG_AUTO_HOME " Auto Home" - #define MSG_SET_ORIGIN " Set Origin" - #define MSG_PREHEAT " Preheat" - #define MSG_COOLDOWN " Cooldown" - #define MSG_EXTRUDE " Extrude" + #define MSG_DISABLE_STEPPERS " Stepper abschalten" + #define MSG_AUTO_HOME " Auto Heim" + #define MSG_SET_ORIGIN " Position setzen" + #define MSG_PREHEAT_PLA " Aufheizen PLA" + #define MSG_PREHEAT_ABS " Aufheizen ABS" + #define MSG_COOLDOWN " Abkuehlen" - #define MSG_EXTRUDE " Extrudiren" + #define MSG_MOVE_AXIS " Move Axis \x7E" - #define MSG_SPEED " Speed:" - #define MSG_NOZZLE " \002Nozzle:" - #define MSG_BED " \002Bed:" - #define MSG_FAN_SPEED " Fan speed:" - #define MSG_FLOW " Flow:" - #define MSG_CONTROL " Control \003" + #define MSG_MOVE_AXIS " Achsen verfahren \x7E" + #define MSG_SPEED " Geschw:" + #define MSG_NOZZLE " \002Duese:" + #define MSG_BED " \002Bett:" + #define MSG_FAN_SPEED " Luefter geschw.:" + #define MSG_FLOW " Fluss:" + #define MSG_CONTROL " Kontrolle \003" #define MSG_MIN " \002 Min:" #define MSG_MAX " \002 Max:" - #define MSG_FACTOR " \002 Fact:" - #define MSG_AUTOTEMP " Autotemp:" - #define MSG_ON "On " - #define MSG_OFF "Off" + #define MSG_FACTOR " \002 Faktor:" + #define MSG_AUTOTEMP " AutoTemp:" + #define MSG_ON "Ein " + #define MSG_OFF "Aus " #define MSG_PID_P " PID-P: " #define MSG_PID_I " PID-I: " #define MSG_PID_D " PID-D: " @@@ -198,89 -257,87 +200,88 @@@ #define MSG_ZSTEPS " Zsteps/mm:" #define MSG_ESTEPS " Esteps/mm:" #define MSG_MAIN_WIDE " Main \003" - #define MSG_TEMPERATURE_WIDE " Temperature \x7E" + #define MSG_TEMPERATURE_WIDE " Temperatur \x7E" #define MSG_MOTION_WIDE " Motion \x7E" - #define MSG_STORE_EPROM " Store EPROM" - #define MSG_LOAD_EPROM " Load EPROM" - #define MSG_RESTORE_FAILSAFE " Restore Failsafe" + #define MSG_STORE_EPROM " EPROM speichern" + #define MSG_LOAD_EPROM " EPROM laden" + #define MSG_RESTORE_FAILSAFE " Standard Konfig." #define MSG_REFRESH "\004Refresh" - #define MSG_WATCH " Watch \003" + #define MSG_WATCH " Beobachten \003" #define MSG_PREPARE " Prepare \x7E" - #define MSG_CONTROL_ARROW " Kontrolle \x7E" + #define MSG_PREPARE_ALT " Prepare \003" - #define MSG_CONTROL_ARROW " Control \x7E" #define MSG_TUNE " Tune \x7E" - #define MSG_STOP_PRINT " Stop Print \x7E" - #define MSG_CARD_MENU " Card Menu \x7E" - #define MSG_NO_CARD " No Card" - #define MSG_SERIAL_ERROR_MENU_STRUCTURE "Something is wrong in the MenuStructure." + #define MSG_STOP_PRINT " Druck stoppen \x7E" + #define MSG_CARD_MENU " SDKarten Menue \x7E" + #define MSG_NO_CARD " Keine SDKarte" + #define MSG_SERIAL_ERROR_MENU_STRUCTURE "Fehler in der Menuestruktur." + #define MSG_DWELL "DWELL..." + #define MSG_NO_MOVE "No move." + #define MSG_PART_RELEASE "Partial Release" + #define MSG_KILLED "KILLED. " + #define MSG_PREHEAT_PLA " Preheat PLA" + #define MSG_PREHEAT_ABS " Preheat ABS" -#endif -#if LANGUAGE_CHOICE == 5 -// LCD Menu Messages +// Serial Console Messages - #define WELCOME_MSG "RepRap Ready." - #define MSG_SD_INSERTED "Card Ready" - #define MSG_SD_REMOVED "Card Initiate" - #define MSG_MAIN " Main \003" - #define MSG_AUTOSTART " Autostart" - #define MSG_DISABLE_STEPPERS " Disable Steppers" - #define MSG_AUTO_HOME " Auto Home" - #define MSG_SET_ORIGIN " Set Origin" - #define MSG_PREHEAT_PLA " Preheat PLA" - #define MSG_PREHEAT_ABS " Preheat ABS" - #define MSG_COOLDOWN " Cooldown" - #define MSG_EXTRUDE " Extrude" - #define MSG_MOVE_AXIS " Move Axis \x7E" - #define MSG_SPEED " Speed:" - #define MSG_NOZZLE " \002Nozzle:" - #define MSG_BED " \002Bed:" - #define MSG_FAN_SPEED " Fan speed:" - #define MSG_FLOW " Flow:" - #define MSG_CONTROL " Control \003" - #define MSG_MIN " \002 Min:" - #define MSG_MAX " \002 Max:" - #define MSG_FACTOR " \002 Fact:" - #define MSG_AUTOTEMP " Autotemp:" - #define MSG_ON "On " - #define MSG_OFF "Off" - #define MSG_PID_P " PID-P: " - #define MSG_PID_I " PID-I: " - #define MSG_PID_D " PID-D: " - #define MSG_PID_C " PID-C: " - #define MSG_ACC " Acc:" - #define MSG_VXY_JERK " Vxy-jerk: " - #define MSG_VMAX " Vmax " - #define MSG_X "x:" - #define MSG_Y "y:" - #define MSG_Z "z:" - #define MSG_E "e:" - #define MSG_VMIN " Vmin:" - #define MSG_VTRAV_MIN " VTrav min:" - #define MSG_AMAX " Amax " - #define MSG_A_RETRACT " A-retract:" - #define MSG_XSTEPS " Xsteps/mm:" - #define MSG_YSTEPS " Ysteps/mm:" - #define MSG_ZSTEPS " Zsteps/mm:" - #define MSG_ESTEPS " Esteps/mm:" - #define MSG_MAIN_WIDE " Main \003" - #define MSG_TEMPERATURE_WIDE " Temperature \x7E" - #define MSG_MOTION_WIDE " Motion \x7E" - #define MSG_STORE_EPROM " Store EPROM" - #define MSG_LOAD_EPROM " Load EPROM" - #define MSG_RESTORE_FAILSAFE " Restore Failsafe" - #define MSG_REFRESH "\004Refresh" - #define MSG_WATCH " Watch \003" - #define MSG_PREPARE " Prepare \x7E" - #define MSG_CONTROL_ARROW " Control \x7E" - #define MSG_TUNE " Tune \x7E" - #define MSG_STOP_PRINT " Stop Print \x7E" - #define MSG_CARD_MENU " Card Menu \x7E" - #define MSG_NO_CARD " No Card" - #define MSG_SERIAL_ERROR_MENU_STRUCTURE "Something is wrong in the MenuStructure." + #define MSG_Enqueing "enqueing \"" + #define MSG_POWERUP "PowerUp" + #define MSG_EXTERNAL_RESET " External Reset" + #define MSG_BROWNOUT_RESET " Brown out Reset" + #define MSG_WATCHDOG_RESET " Watchdog Reset" + #define MSG_SOFTWARE_RESET " Software Reset" + #define MSG_MARLIN "Marlin: " + #define MSG_AUTHOR " | Author: " + #define MSG_CONFIGURATION_VER " Last Updated: " + #define MSG_FREE_MEMORY " Free Memory: " + #define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: " + #define MSG_OK "ok" + #define MSG_FILE_SAVED "Done saving file." + #define MSG_ERR_LINE_NO "Line Number is not Last Line Number+1, Last Line:" + #define MSG_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line:" + #define MSG_ERR_NO_CHECKSUM "No Checksum with line number, Last Line:" + #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No Line Number with checksum, Last Line:" + #define MSG_FILE_PRINTED "Done printing file" + #define MSG_BEGIN_FILE_LIST "Begin file list" + #define MSG_END_FILE_LIST "End file list" + #define MSG_M104_INVALID_EXTRUDER "M104 Invalid extruder " + #define MSG_M105_INVALID_EXTRUDER "M105 Invalid extruder " + #define MSG_ERR_NO_THERMISTORS "No thermistors - no temp" + #define MSG_M109_INVALID_EXTRUDER "M109 Invalid extruder " + #define MSG_HEATING "Heating..." + #define MSG_HEATING_COMPLETE "Heating done." + #define MSG_BED_HEATING "Bed Heating." + #define MSG_BED_DONE "Bed done." + #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:http://www.mendel-parts.com PROTOCOL_VERSION:1.0 MACHINE_TYPE:Mendel EXTRUDER_COUNT:1\n" + #define MSG_COUNT_X " Count X:" + #define MSG_ERR_KILLED "Printer halted. kill() called !!" + #define MSG_RESEND "Resend:" + #define MSG_UNKNOWN_COMMAND "Unknown command:\"" + #define MSG_ACTIVE_EXTRUDER "Active Extruder: " + #define MSG_INVALID_EXTRUDER "Invalid extruder" + #define MSG_X_MIN "x_min:" + #define MSG_X_MAX "x_max:" + #define MSG_Y_MIN "y_min:" + #define MSG_Y_MAX "y_max:" + #define MSG_Z_MIN "z_min:" + #define MSG_Z_MAX "z_max:" -#endif + #define MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir" + #define MSG_SD_INIT_FAIL "SD init fail" + #define MSG_SD_VOL_INIT_FAIL "volume.init failed" + #define MSG_SD_OPENROOT_FAIL "openRoot failed" + #define MSG_SD_CARD_OK "SD card ok" + #define MSG_SD_WORKDIR_FAIL "workDir open failed" + #define MSG_SD_OPEN_FILE_FAIL "open failed, File: " + #define MSG_SD_FILE_OPENED "File opened:" + #define MSG_SD_SIZE " Size:" + #define MSG_SD_FILE_SELECTED "File selected" + #define MSG_SD_WRITE_TO_FILE "Writing to file: " + #define MSG_SD_PRINTING_BYTE "SD printing byte " + #define MSG_SD_NOT_PRINTING "Not SD printing" + #define MSG_SD_ERR_WRITE_TO_FILE "error writing to file" + #define MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir:" +#endif #endif // ifndef LANGUAGE_H