From: Steven Abadie <steven@alephobjects.com>
Date: Thu, 18 Dec 2014 01:58:06 +0000 (-0700)
Subject: Quick print profiles updated for PLA Mini profiles.
X-Git-Tag: 14.09-1.18~25
X-Git-Url: http://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?a=commitdiff_plain;h=62113fa98b1f9fc06c8546afac1159c198e69c80;p=cura.git

Quick print profiles updated for PLA Mini profiles.
---

diff --git a/Cura/gui/simpleMode.py b/Cura/gui/simpleMode.py
index 758db3ba..9789372d 100644
--- a/Cura/gui/simpleMode.py
+++ b/Cura/gui/simpleMode.py
@@ -193,7 +193,7 @@ G90                             ; absolute positioning
 ;{profile_string}
 """)
 				if self.printMaterialHIPS.GetValue():
-					put('print_bed_temperature', '100')
+					put('print_bed_temperature', '97')
 					if self.printTypeLow.GetValue():
 						put('layer_height', '0.38')
 						put('print_speed', '85')
@@ -213,7 +213,7 @@ G90                             ; absolute positioning
 						put('inset0_speed', '20')
 						put('insetx_speed', '25')
 				if self.printMaterialABS.GetValue():
-					put('print_bed_temperature', '110')
+					put('print_bed_temperature', '104')
 					if self.printTypeLow.GetValue():
 						put('layer_height', '0.38')
 						put('print_speed', '85')
@@ -233,18 +233,18 @@ G90                             ; absolute positioning
 						put('inset0_speed', '30')
 						put('insetx_speed', '35')
 			elif self.printMaterialPLA.GetValue():
-				put('print_temperature', '200')
-				put('print_bed_temperature', '65')
+				put('print_temperature', '205')
+				put('print_bed_temperature', '60')
 				put('solid_layer_thickness', '1')
 				put('print_speed', '50')
 				put('retraction_amount', '1.5')
-				put('bottom_layer_speed', '20')
-				put('infill_speed', '55')
-				put('inset0_speed', '45')
-				put('insetx_speed', '50')
+				put('bottom_layer_speed', '15')
+				put('infill_speed', '40')
+				put('inset0_speed', '30')
+				put('insetx_speed', '35')
 				put('cool_min_layer_time', '20')
-				put('fan_full_height', '1')
-				put('fan_speed', '100')
+				put('fan_full_height', '0.5')
+				put('fan_speed', '75')
 				put('fan_speed_max', '100')
 				put('start.gcode', """;This Gcode has been generated specifically for the LulzBot Mini
 ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}