From: Ian Jackson <ijackson@chiark.greenend.org.uk>
Date: Thu, 9 Aug 2012 17:48:16 +0000 (+0100)
Subject: refresh
X-Git-Url: http://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?a=commitdiff_plain;h=5d3dd917c4bc72ce38ef4d443a8c4cc07130781f;p=marlin.git

refresh
---

diff --git a/meta b/meta
index c3d6df1..9951d56 100644
--- a/meta
+++ b/meta
@@ -1,13 +1,12 @@
 Version: 1
-Previous: fcf4cf5639b0deff6a73a337fb6e76f64f496e07
-Head: a7c1b9c09e12f52801b53ee8172df51652ccde4e
+Previous: a01c814969b3e5da8a62e3b424269769df74c041
+Head: af1f4753e869f8ec16732c12218d81db2677ecfd
 Applied:
   marlin-pde-include-comment-for: 121f976406e6921f5b511f6dc4882985cf4b4133
   add-to-marlin-gitignore: 83dcad520f19d2ea6f1164b9c04e1430b679b3e2
   makefile-support-v-1: 3f7781d27a680fa4faeb5d7f38250e4877632ce3
   motion-control-max-min: 44befa5f783994f92f7c6fd39b7f581cf174d9d4
-  m206-always-use-homing-homeing: 4ca745180d445e62051d87a9ca0b7daecddcdc86
-  refresh-temp: a7c1b9c09e12f52801b53ee8172df51652ccde4e
+  m206-always-use-homing-homeing: af1f4753e869f8ec16732c12218d81db2677ecfd
 Unapplied:
   eeprom-provide-smaller-code-fo: 908bebda77f754b762a36f96bc7d938aca4935ba
   m206-save-values-in-eeprom: bbde4ea454248ef02e59183cab6992c5d4331d8c
diff --git a/patches/m206-always-use-homing-homeing b/patches/m206-always-use-homing-homeing
index 458a4a2..d771c41 100644
--- a/patches/m206-always-use-homing-homeing
+++ b/patches/m206-always-use-homing-homeing
@@ -24,11 +24,9 @@ permitted by the software endstops ?
 
 I have taken the view that the software endstops are a backstop safety
 feature which is not necessarily entirely accurate, and that reducing
-the scope of movement is not desirable.
-
-I have therefore implemented it so that negative values for M206
-increase the total range of movement, whereas positive values leave it
-unchanged.
+the scope of movement, at either end, is not desirable.  I have
+therefore arranged that nonzero values for M206 increase the total
+range of movement.
 
 So for example with
   #define X_MIN_POS 0
@@ -40,7 +38,7 @@ M206 X-10 would permit the machine to move from the endstop
 X=+100).
 
 M206 X+10 would permit the machine to move from the endstop
-(considered X=-10) 100mm in the positive X direction (considered
+(considered X=-10) 110mm in the positive X direction (considered
 X=+110).
 
 
diff --git a/patches/refresh-temp b/patches/refresh-temp
deleted file mode 100644
index 476b494..0000000
--- a/patches/refresh-temp
+++ /dev/null
@@ -1,10 +0,0 @@
-Bottom: c0a7e719fd15d0dc282dd2ab568458d732ca3e7a
-Top:    c0a7e719fd15d0dc282dd2ab568458d732ca3e7a
-Author: Ian Jackson <ijackson@chiark.greenend.org.uk>
-Date:   2012-08-09 18:46:59 +0100
-
-Refresh of m206-always-use-homing-homeing
-
----
-
-