From: Ian Jackson <ijackson@chiark.greenend.org.uk>
Date: Thu, 2 Feb 2017 00:09:18 +0000 (+0000)
Subject: maglite-holder: introduce movement_extra_angle
X-Git-Url: http://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?a=commitdiff_plain;h=506a3399598959f3feb314e17fd92d7c9b75bfa9;p=reprap-play.git

maglite-holder: introduce movement_extra_angle
---

diff --git a/maglite-holder.scad b/maglite-holder.scad
index 8e96586..1b7531b 100644
--- a/maglite-holder.scad
+++ b/maglite-holder.scad
@@ -24,6 +24,8 @@ brace = [ 40, 20, 20 ];
 hole_dia = 4 + 0.5;
 hole_slot = 5;
 
+movement_extra_angle = 5;
+
 slop = 4; // total, not each side
 
 torch_min_xcoord_fig_cm = -2.7; // coordinates of bottom left of curve
@@ -99,9 +101,12 @@ module TorchMovement(){
   translate([0, -torch_out, 0]) {
     translate([0, 0, -torch_recess])
       Torch();
-    rotate([90,0,0])
-      linear_extrude(height= block_out)
-      projection() rotate([-90,0,0]) Torch();
+    for (as=[-1,+1]) {
+      rotate([0,0, as*movement_extra_angle])
+	rotate([90,0,0])
+	linear_extrude(height= block_out)
+	projection() rotate([-90,0,0]) Torch();
+    }
   }
 }