From: daid303 <daid303@gmail.com>
Date: Wed, 9 Jan 2013 13:28:12 +0000 (+0100)
Subject: Remove some commented old code.
X-Git-Tag: 13.03~116
X-Git-Url: http://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?a=commitdiff_plain;h=4f30ca5aa1ff47c53d4ccd5edda5a3b33b806961;p=cura.git

Remove some commented old code.
---

diff --git a/Cura/gui/projectPlanner.py b/Cura/gui/projectPlanner.py
index c8541058..356a856c 100644
--- a/Cura/gui/projectPlanner.py
+++ b/Cura/gui/projectPlanner.py
@@ -1012,92 +1012,6 @@ class ProjectSliceProgressWindow(wx.Frame):
 			self.progressLog.append(line)
 			line = p.stderr.readline()
 		self.returnCode = p.wait()
-
-#		resultFile = open(self.resultFilename, "w")
-#		put = profile.setTempOverride
-#		self.progressLog = []
-#		for action in self.actionList:
-#			wx.CallAfter(self.SetTitle, "Building: [%d/%d]"  % (self.actionList.index(action) + 1, len(self.actionList)))
-#			if not action.usePreviousSlice:
-#				p = sliceRun.startSliceCommandProcess(action.sliceCmd)
-#				line = p.stdout.readline()
-#
-#				maxValue = 1
-#				while(len(line) > 0):
-#					line = line.rstrip()
-#					if line[0:9] == "Progress[" and line[-1:] == "]":
-#						progress = line[9:-1].split(":")
-#						if len(progress) > 2:
-#							maxValue = int(progress[2])
-#						wx.CallAfter(self.SetProgress, progress[0], int(progress[1]), maxValue)
-#					else:
-#						self.progressLog.append(line)
-#						wx.CallAfter(self.statusText.SetLabel, line)
-#					if self.abort:
-#						p.terminate()
-#						wx.CallAfter(self.statusText.SetLabel, "Aborted by user.")
-#						resultFile.close()
-#						return
-#					line = p.stdout.readline()
-#				self.returnCode = p.wait()
-#
-#			put('object_center_x', action.centerX - self.extruderOffset[action.extruder][0])
-#			put('object_center_y', action.centerY - self.extruderOffset[action.extruder][1])
-#			put('clear_z', action.clearZ)
-#			put('extruder', action.extruder)
-#			put('print_temperature', action.temperature)
-#
-#			if action == self.actionList[0]:
-#				resultFile.write(';TYPE:CUSTOM\n')
-#				resultFile.write('T%d\n' % (action.extruder))
-#				currentExtruder = action.extruder
-#				prevTemp = action.temperature
-#				startGCode = profile.getAlterationFileContents('start.gcode')
-#				startGCode = startGCode.replace('?filename?', 'Multiple files')
-#				resultFile.write(startGCode)
-#			else:
-#				#reset the extrusion length, and move to the next object center.
-#				resultFile.write(';TYPE:CUSTOM\n')
-#				if prevTemp != action.temperature and action.temperature > 0:
-#					resultFile.write('M104 S%d\n' % (int(action.temperature)))
-#					prevTemp = action.temperature
-#				resultFile.write(profile.getAlterationFileContents('nextobject.gcode'))
-#			resultFile.write(';PRINTNR:%d\n' % self.actionList.index(action))
-#			profile.resetTempOverride()
-#
-#			if not action.usePreviousSlice:
-#				f = open(sliceRun.getExportFilename(action.filename, "project_tmp"), "r")
-#				data = f.read(4096)
-#				while data != '':
-#					resultFile.write(data)
-#					data = f.read(4096)
-#				f.close()
-#				savedCenterX = action.centerX
-#				savedCenterY = action.centerY
-#			else:
-#				f = open(sliceRun.getExportFilename(action.filename, "project_tmp"), "r")
-#				for line in f:
-#					if line[0] != ';':
-#						if 'X' in line:
-#							line = self._adjustNumberInLine(line, 'X', action.centerX - savedCenterX)
-#						if 'Y' in line:
-#							line = self._adjustNumberInLine(line, 'Y', action.centerY - savedCenterY)
-#					resultFile.write(line)
-#				f.close()
-#
-#			if not action.leaveResultForNextSlice:
-#				os.remove(sliceRun.getExportFilename(action.filename, "project_tmp"))
-#
-#			wx.CallAfter(self.progressGauge.SetValue, 10000)
-#			self.totalDoneFactor = 0.0
-#			wx.CallAfter(self.progressGauge2.SetValue, self.actionList.index(action) + 1)
-#
-#		resultFile.write(';TYPE:CUSTOM\n')
-#		if len(self.actionList) > 1 and self.actionList[-1].clearZ > 1:
-#			#only move to higher Z if we have sliced more then 1 object. This solves the "move into print after printing" problem with the print-all-at-once option.
-#			resultFile.write('G1 Z%f F%f\n' % (self.actionList[-1].clearZ, profile.getProfileSettingFloat('max_z_speed') * 60))
-#		resultFile.write(profile.getAlterationFileContents('end.gcode'))
-#		resultFile.close()
 		self.progressGauge2.SetValue(self.fileCount)
 
 		gcode = gcodeInterpreter.gcode()