From: daid Date: Tue, 16 Dec 2014 12:17:36 +0000 (+0100) Subject: Remove the changelog, this is kept in the new file dialog. X-Git-Tag: 15.01-RC3~2 X-Git-Url: http://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?a=commitdiff_plain;h=4794fd894fd6698b957092984144e5aedd41a7c3;p=cura.git Remove the changelog, this is kept in the new file dialog. --- diff --git a/changelog b/changelog deleted file mode 100644 index ffad1f19..00000000 --- a/changelog +++ /dev/null @@ -1,56 +0,0 @@ -Development -* Added an expert parameter for the wipe tower size, and made brim go around the wipe tower -* Added experimental support for printing with the Doodle3D WiFi box -* Updated object boundaries for multi-object prints, allows for tighter fitting of objects on the build platform -* Updated time-estimate to greatly improve accuracy of the estimate. -* Fixed problem with retractions not happening when they should. -* Added keyboard control for the 3D window to look around with cursor keys. - -Ultimaker2 - Firmware update - 13.12 -* Fixed the problem where aborting a print did not always home the head. -* Fixed bug in acceleration planning causing slow moves on rare occasions. -* Disable the normal menus during USB printing, and support for USB based menus. -* Disable stepper drivers after print is finished or aborted, so you can manually move the head. -* Expert feature: Support M907 for setting the motor current. - -Ultimaker Original - Firmware update - 13.12 -* Fixed bug in acceleration planning causing slow moves on rare occasions. -* Updated to new ErikZalm Marlin base, fixing the long standing slower retraction bug. - -13.11.2 -* Adjusted the gantry height to 55mm for the Ultimaker, as 60mm was 3mm to high for the default setup with an V2 hotend. -* Added disallowed zones for UM2 -* Added ooze-shield for dual-color printing -* Added wipe tower for dual-extrusion -* Added no-go zones for UM2 glass clips - -Ultimaker2 - Firmware update - 13.11-2 -* Fixed UM2 build volume offset so that you do not print off the glass plate. -* Slightly tweaked the filament change procedure so there is less chance of a blob staying behind. -* Slightly tweaked the SD-Card error problems. -* Added LED settings to Tune menu -* Start heating the nozzles when the bed is nearing its final temperature, so the nozzles do not sit hot. -* Make sure all commands are finished before starting a print or changing material. This could cause issues when you where too fast. - -13.11 -* Added imageToMesh tool to load images as 3D height maps -* Fixed Z support distance when using "everywhere" support. -* Updated to new version of clipper to fix rare slicing bugs that resulted in odd paths. -* Fixed "Reset profile" so it no longer resets the machine settings. -* Updated support material so support is smoother and has less small sections which are hard to remove. -* Fixed start-gcode when using dual-support material -* Change how the fan is handled on lower layer to improve UM2 printing. -* Fix that retraction is enabled when selecting UM2 or RepRap. -* Scale down very large models, or scale up very tiny models automagicly. -* Fixed skirt and brim to go around the support instead of under it. -* Added spiralize mode - -Ultimaker2 - Firmware update - 13.10-5 -* Fixed SD-Card read error -* Added feature to store your own material presets -* Fixed the 280C ABS problem, causing a temperature sensor error - -13.10 -* Added YouMagine upload button -* Added multiple machine support -* Redone support material