From: Ian Jackson <ijackson@chiark.greenend.org.uk>
Date: Sun, 1 Jun 2014 10:03:15 +0000 (+0100)
Subject: topeak-seatstay-lock: cylindrical hook to make lock hang at angle, BAD
X-Git-Tag: filamentspool-v2-release~338
X-Git-Url: http://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?a=commitdiff_plain;h=28e14bd0de57ea5b49538e772b32fc876a213c81;hp=31ea2e7a50d7611c7ed16ebc7e977d0a7f7e3bd2;p=reprap-play.git

topeak-seatstay-lock: cylindrical hook to make lock hang at angle, BAD
---

diff --git a/topeak-seatstay-lock.scad b/topeak-seatstay-lock.scad
index ba06666..80c8530 100644
--- a/topeak-seatstay-lock.scad
+++ b/topeak-seatstay-lock.scad
@@ -82,7 +82,7 @@ module Pin(){
       translate([-pin_width/2, -100]) square([pin_width, 101]);
     }
     hull() for (d=[0,10]) {
-      translate([d*2,-d,0])
+      translate([d*1.5,-d,0])
 	translate([-lock_manouvre_thick/2,
 		   -pin_workdepth-100,
 		   -lock_manouvre_len_smaller])
@@ -92,6 +92,10 @@ module Pin(){
     translate([-lock_manouvre_thick/2, -pin_workdepth-50,
 	       -lock_hang_width/2])
       cube([50, 50, lock_hang_width]);
+    translate([-lock_manouvre_thick/2, -pin_workdepth-lock_manouvre_thick/2+0.1,
+	       -lock_hang_width/2])
+      rotate([0,90,0])
+      cylinder(r=lock_manouvre_thick/2, h=50, $fn=20);
   }
 }