From: nickthetait <tait@alephobjects.com>
Date: Fri, 5 Jun 2015 20:48:58 +0000 (-0600)
Subject: Update 'Retraction combing' label and description. Part of #117
X-Git-Tag: lulzbot-15.02.1-1.02~6
X-Git-Url: http://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?a=commitdiff_plain;h=218ec487fae9fcddb6f5bca56828c5d2f0b246bd;p=cura.git

Update 'Retraction combing' label and description. Part of #117
---

diff --git a/Cura/util/profile.py b/Cura/util/profile.py
index 9d5e494d..301b9c9b 100644
--- a/Cura/util/profile.py
+++ b/Cura/util/profile.py
@@ -205,7 +205,7 @@ setting('retraction_speed',         40.0, float, 'advanced', _('Retraction')).se
 setting('retraction_amount',         4.5, float, 'advanced', _('Retraction')).setRange(0).setLabel(_("Distance (mm)"), _("Amount of retraction, set at 0 for no retraction at all. A value between 1 and 2 millimeters provides good results for most materials."))
 setting('retraction_dual_amount',   16.5, float, 'advanced', _('Retraction')).setRange(0).setLabel(_("Dual extrusion switch amount (mm)"), _("Amount of retraction when switching nozzle with dual-extrusion, set at 0 for no retraction at all. A value of 16.0mm seems to generate good results."))
 setting('retraction_min_travel',     1.5, float, 'expert',   _('Retraction')).setRange(0).setLabel(_("Minimum travel (mm)"), _("Minimum amount of travel needed for a retraction to happen at all. This setting is used to prevent from having too many retractions in a small area."))
-setting('retraction_combing',      'All',  [_('Off'),_('All'),_('No Skin')], 'expert', _('Retraction')).setLabel(_("Enable combing"), _("Combing is the act of avoiding holes in the print for the head to travel over. If combing is \'Off\' the printer head moves straight from the start point to the end point and it will always retract.  If \'All\', enable combing on all surfaces.  If \'No Skin\', enable combing on all except skin surfaces."))
+setting('retraction_combing',      'All',  [_('Off'),_('All'),_('No Skin')], 'expert', _('Retraction')).setLabel(_("Combing type"), _("When moving between print areas, combing keeps the print head above already printed areas and skips retraction. This helps reduce stringing and reduces the chance of grinding the filament. If combing is \'Off\' the printer head moves straight from the start point to the end point and it will always retract.  If \'All\', combing is always enabled.  If \'No Skin\', combing will not occur on skin (top/bottom fill layers) surfaces."))
 setting('retraction_minimal_extrusion',0.02, float,'expert', _('Retraction')).setRange(0).setLabel(_("Minimal extrusion before retracting (mm)"), _("The minimal amount of extrusion that needs to be done before retracting again if a retraction needs to happen before this minimal is reached the retraction is ignored.\nThis avoids retracting a lot on the same piece of filament which flattens the filament and causes grinding issues."))
 setting('retraction_hop',            0.0, float, 'expert',   _('Retraction')).setRange(0).setLabel(_("Z hop when retracting (mm)"), _("When a retraction is done, the head is lifted by this amount to travel over the print. A value of 0.075 works well. This feature has a lot of positive effect on delta towers."))
 setting('bottom_thickness',          0.3, float, 'advanced', _('Quality')).setRange(0).setLabel(_("Initial layer thickness (mm)"), _("Layer thickness of the bottom layer. A thicker bottom layer makes sticking to the bed easier. Set to 0.0 to have the bottom layer thickness the same as the other layers."))