printMaterialPanel = wx.Panel(self)
self.printMaterialPLA = wx.RadioButton(printMaterialPanel, -1, 'PLA', style=wx.RB_GROUP)
self.printMaterialABS = wx.RadioButton(printMaterialPanel, -1, 'ABS')
- self.printMaterialHIPS = wx.RadioButton(printMaterialPanel, -1, 'HIPS')
+ if profile.getMachineSetting('machine_type') == 'lulzbot_mini' or profile.getMachineSetting('machine_type') == 'lulzbot_TAZ':
+ self.printMaterialHIPS = wx.RadioButton(printMaterialPanel, -1, 'HIPS')
self.printMaterialDiameter = wx.TextCtrl(printMaterialPanel, -1, profile.getProfileSetting('filament_diameter'))
if profile.getMachineSetting('gcode_flavor') == 'UltiGCode':
printMaterialPanel.Show(False)
boxsizer = wx.StaticBoxSizer(sb, wx.VERTICAL)
boxsizer.Add(self.printMaterialPLA)
boxsizer.Add(self.printMaterialABS)
- boxsizer.Add(self.printMaterialHIPS)
+ if profile.getMachineSetting('machine_type') == 'lulzbot_mini' or profile.getMachineSetting('machine_type') == 'lulzbot_TAZ':
+ boxsizer.Add(self.printMaterialHIPS)
boxsizer.Add(wx.StaticText(printMaterialPanel, -1, _("Diameter:")))
boxsizer.Add(self.printMaterialDiameter)
printMaterialPanel.SetSizer(wx.BoxSizer(wx.VERTICAL))
self.printMaterialPLA.Bind(wx.EVT_RADIOBUTTON, lambda e: self._callback())
self.printMaterialABS.Bind(wx.EVT_RADIOBUTTON, lambda e: self._callback())
- self.printMaterialHIPS.Bind(wx.EVT_RADIOBUTTON, lambda e: self._callback())
+ if profile.getMachineSetting('machine_type') == 'lulzbot_mini' or profile.getMachineSetting('machine_type') == 'lulzbot_TAZ':
+ self.printMaterialHIPS.Bind(wx.EVT_RADIOBUTTON, lambda e: self._callback())
self.printMaterialDiameter.Bind(wx.EVT_TEXT, lambda e: self._callback())
self.printSupport.Bind(wx.EVT_CHECKBOX, lambda e: self._callback())
put('support', _("Exterior Only"))
# LulzBot Mini slice settings for use with the simple slice selection. This needs to be further modified to only be used when the Mini machine config is loaded.
- put('print_temperature', '0')
- put('print_bed_temperature', '0')
- put('retraction_speed', '25')
- put('bottom_thickness', '0.425')
- put('layer0_width_factor', '125')
- put('fan_speed', '10')
- put('fan_speed_max', '50')
- put('cool_head_lift', 'True')
- put('end.gcode', """;End GCode
+ if profile.getMachineSetting('machine_type') == 'lulzbot_mini':
+ put('print_temperature', '0')
+ put('print_bed_temperature', '0')
+ put('retraction_speed', '25')
+ put('bottom_thickness', '0.425')
+ put('layer0_width_factor', '125')
+ put('fan_speed', '10')
+ put('fan_speed_max', '50')
+ put('cool_head_lift', 'True')
+ put('end.gcode', """;End GCode
M104 T0 S0 ;extruder heater off
M104 T1 S0 ;extruder heater off
M140 S0 ;heated bed heater off (if you have it)
G90 ;absolute positioning
;{profile_string}""")
- if self.printMaterialHIPS.GetValue() or self.printMaterialABS.GetValue():
- put('solid_layer_thickness', '0.8')
- put('fill_density', '40')
- put('retraction_amount', '1.5')
- put('travel_speed', '175')
- put('start.gcode', """;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+ if self.printMaterialHIPS.GetValue() or self.printMaterialABS.GetValue():
+ put('solid_layer_thickness', '0.8')
+ put('fill_density', '40')
+ put('retraction_amount', '1.5')
+ put('travel_speed', '175')
+ put('start.gcode', """;LulzBot Mini
+ ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
;Print time: {print_time}
;Filament used: {filament_amount}m {filament_weight}g
;Filament cost: {filament_cost}
G1 Z2 E5 F200 ; extrude filament back into nozzle
M140 S110 ; get bed temping up during first layer
M206 X0.0 Y0.0 Z0.0 ; offset home position for fine tuning""")
- elif self.printMaterialPLA.GetValue():
- put('start.gcode', """;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+ elif self.printMaterialPLA.GetValue():
+ put('start.gcode', """;LulzBot Mini
+ ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
;Print time: {print_time}
;Filament used: {filament_amount}m {filament_weight}g
;Filament cost: {filament_cost}
G90 ;absolute positioning
;{profile_string}""")
- nozzle_size = float(get('nozzle_size'))
- if self.printMaterialHIPS.GetValue():
- put('retraction_hop', '0.6')
- put('bottom_layer_speed', '30')
- put('fan_full_height', '5')
- put('cool_min_feedrate', '45')
- if self.printTypeLow.GetValue():
- put('layer_height', '0.38')
- put('print_speed', '85')
- put('infill_speed', '115')
- put('inset0_speed', '75')
- put('insetx_speed', '80')
- if self.printTypeNormal.GetValue():
- put('layer_height', '0.25')
- put('print_speed', '65')
- put('infill_speed', '85')
- put('inset0_speed', '45')
- put('insetx_speed', '50')
- if self.printTypeHigh.GetValue():
- put('layer_height', '0.14')
- put('print_speed', '40')
- put('infill_speed', '65')
- put('inset0_speed', '30')
- put('insetx_speed', '35')
- if self.printMaterialABS.GetValue():
- put('retraction_hop', '0.6')
- put('cool_min_feedrate', '10')
- put('fan_enabled', 'False')
- if self.printTypeLow.GetValue():
- put('layer_height', '0.38')
- put('print_speed', '85')
+ nozzle_size = float(get('nozzle_size'))
+ if self.printMaterialHIPS.GetValue():
+ put('retraction_hop', '0.6')
put('bottom_layer_speed', '30')
- put('infill_speed', '110')
- put('inset0_speed', '70')
- put('insetx_speed', '80')
- put('brim_line_count', '8')
- if self.printTypeNormal.GetValue():
- put('layer_height', '0.25')
- put('print_speed', '75')
- put('bottom_layer_speed', '25')
- put('infill_speed', '80')
- put('inset0_speed', '60')
- put('insetx_speed', '70')
- if self.printTypeHigh.GetValue():
- put('layer_height', '0.14')
- put('print_speed', '60')
- put('bottom_layer_speed', '25')
- put('infill_speed', '60')
- put('inset0_speed', '40')
- put('insetx_speed', '50')
put('fan_full_height', '5')
- put('skirt_line_count', '4')
- if self.printMaterialPLA.GetValue():
- put('solid_Layer_thickness', '1')
- put('fill_density', '70')
- put('retraction_amount', '3')
- put('retraction_hop', '0.5')
- put('travel_speed', '150')
- put('bottom_travel_speed', '30')
- put('fan_full_height', '1')
- put('cool_min_feedrate', '15')
- put('skirt_line_count', '2')
- if self.printTypeLow.GetValue():
- put('layer_height', '0.38')
- put('print_speed', '90')
- put('infill_speed', '125')
- put('inset0_speed', '75')
- put('insetx_speed', '85')
+ put('cool_min_feedrate', '45')
+ if self.printTypeLow.GetValue():
+ put('layer_height', '0.38')
+ put('print_speed', '85')
+ put('infill_speed', '115')
+ put('inset0_speed', '75')
+ put('insetx_speed', '80')
+ if self.printTypeNormal.GetValue():
+ put('layer_height', '0.25')
+ put('print_speed', '65')
+ put('infill_speed', '85')
+ put('inset0_speed', '45')
+ put('insetx_speed', '50')
+ if self.printTypeHigh.GetValue():
+ put('layer_height', '0.14')
+ put('print_speed', '40')
+ put('infill_speed', '65')
+ put('inset0_speed', '30')
+ put('insetx_speed', '35')
+ if self.printMaterialABS.GetValue():
+ put('retraction_hop', '0.6')
+ put('cool_min_feedrate', '10')
+ put('fan_enabled', 'False')
+ if self.printTypeLow.GetValue():
+ put('layer_height', '0.38')
+ put('print_speed', '85')
+ put('bottom_layer_speed', '30')
+ put('infill_speed', '110')
+ put('inset0_speed', '70')
+ put('insetx_speed', '80')
+ put('brim_line_count', '8')
+ if self.printTypeNormal.GetValue():
+ put('layer_height', '0.25')
+ put('print_speed', '75')
+ put('bottom_layer_speed', '25')
+ put('infill_speed', '80')
+ put('inset0_speed', '60')
+ put('insetx_speed', '70')
+ if self.printTypeHigh.GetValue():
+ put('layer_height', '0.14')
+ put('print_speed', '60')
+ put('bottom_layer_speed', '25')
+ put('infill_speed', '60')
+ put('inset0_speed', '40')
+ put('insetx_speed', '50')
+ put('fan_full_height', '5')
+ put('skirt_line_count', '4')
+ if self.printMaterialPLA.GetValue():
+ put('solid_Layer_thickness', '1')
+ put('fill_density', '70')
+ put('retraction_amount', '3')
+ put('retraction_hop', '0.5')
+ put('travel_speed', '150')
+ put('bottom_travel_speed', '30')
+ put('fan_full_height', '1')
+ put('cool_min_feedrate', '15')
+ put('skirt_line_count', '2')
+ if self.printTypeLow.GetValue():
+ put('layer_height', '0.38')
+ put('print_speed', '90')
+ put('infill_speed', '125')
+ put('inset0_speed', '75')
+ put('insetx_speed', '85')
+ if self.printTypeNormal.GetValue():
+ put('layer_height', '0.25')
+ put('print_speed', '70')
+ put('infill_speed', '95')
+ put('inset0_speed', '65')
+ put('insetx_speed', '75')
+ if self.printTypeHigh.GetValue():
+ pass
+
+ nozzle_size = float(get('nozzle_size'))
+ put('filament_diameter', self.printMaterialDiameter.GetValue())
+ put('plugin_config', '')
+### TAZ profile settings are needed here
+ else:
+ nozzle_size = float(get('nozzle_size'))
if self.printTypeNormal.GetValue():
- put('layer_height', '0.25')
- put('print_speed', '70')
- put('infill_speed', '95')
- put('inset0_speed', '65')
- put('insetx_speed', '75')
- if self.printTypeHigh.GetValue():
- pass
+ put('layer_height', '0.2')
+ put('wall_thickness', nozzle_size * 2.0)
+ put('layer_height', '0.10')
+ put('fill_density', '20')
+ elif self.printTypeLow.GetValue():
+ put('wall_thickness', nozzle_size * 2.5)
+ put('layer_height', '0.20')
+ put('fill_density', '10')
+ put('print_speed', '60')
+ put('cool_min_layer_time', '3')
+ put('bottom_layer_speed', '30')
+ elif self.printTypeHigh.GetValue():
+ put('wall_thickness', nozzle_size * 2.0)
+ put('layer_height', '0.06')
+ put('fill_density', '20')
+ put('bottom_layer_speed', '15')
+ elif self.printTypeJoris.GetValue():
+ put('wall_thickness', nozzle_size * 1.5)
- nozzle_size = float(get('nozzle_size'))
- put('filament_diameter', self.printMaterialDiameter.GetValue())
- put('plugin_config', '')
+ put('filament_diameter', self.printMaterialDiameter.GetValue())
+ if self.printMaterialPLA.GetValue():
+ pass
+ if self.printMaterialABS.GetValue():
+ put('print_bed_temperature', '100')
+ put('platform_adhesion', 'Brim')
+ put('filament_flow', '107')
+ put('print_temperature', '245')
+ put('plugin_config', '')
def updateProfileToControls(self):
pass