Adding support settings to be used when support is turned on in simple mode

diff --git a/Cura/gui/simpleMode.py b/Cura/gui/simpleMode.py
index a73e54db59c118f1c82ded0ce315f87ad0a1ebf9..946832d1ab023a18be2e8afc4458e953757efe4f 100644 (file)
--- a/Cura/gui/simpleMode.py
+++ b/Cura/gui/simpleMode.py
@@ -87,9 +87,6 @@ class simpleModePanel(wx.Panel):
                                continue
                        profile.setTempOverride(setting.getName(), setting.getDefault())
 
-               if self.printSupport.GetValue():
-                       put('support', _("Exterior Only"))
-
 # LulzBot Mini slice settings for use with the simple slice selection.
                if profile.getMachineSetting('machine_type') == 'lulzbot_mini':
                        put('wall_thickness', '1')
@@ -119,7 +116,13 @@ M84                             ; steppers off
 G90                             ; absolute positioning
 ;{profile_string}
 """)
-
+                       if self.printSupport.GetValue():
+                               put('support', _("Everywhere"))
+                               put('support_type', 'Lines')
+                               put('support_angle', '45')
+                               put('support_fill_rate', '30')
+                               put('support_xy_distance', '0.7')
+                               put('support_z_distance', '0.05')
                        if self.printMaterialHIPS.GetValue() or self.printMaterialABS.GetValue():
                                put('solid_layer_thickness', '0.8')
                                put('retraction_amount', '1.5')
@@ -547,7 +550,8 @@ M140 S75                     ; get bed temping up during first layer
                                put('bottom_layer_speed', '15')
                        elif self.printTypeJoris.GetValue():
                                put('wall_thickness', nozzle_size * 1.5)
-
+                       if self.printSupport.GetValue():
+                               put('support', _("Exterior Only"))
                        put('filament_diameter', self.printMaterialDiameter.GetValue())
                        if self.printMaterialPLA.GetValue():
                                pass