Add a skin speed setting to have Paul make awesome profiles for the quickprint settings.

diff --git a/Cura/util/profile.py b/Cura/util/profile.py
index 1c29a0d876be4e2877487714493c196cad9d5dee..376e9c2cee5d551d45650d50f81f9bffa471268d 100644 (file)
--- a/Cura/util/profile.py
+++ b/Cura/util/profile.py
@@ -213,6 +213,7 @@ setting('overlap_dual',             0.15, float, 'advanced', _('Quality')).setLa
 setting('travel_speed',            150.0, float, 'advanced', _('Speed')).setRange(0.1).setLabel(_("Travel speed (mm/s)"), _("Speed at which travel moves are done, a well built Ultimaker can reach speeds of 250mm/s. But some machines might miss steps then."))
 setting('bottom_layer_speed',         20, float, 'advanced', _('Speed')).setRange(0.1).setLabel(_("Bottom layer speed (mm/s)"), _("Print speed for the bottom layer, you want to print the first layer slower so it sticks better to the printer bed."))
 setting('infill_speed',              0.0, float, 'advanced', _('Speed')).setRange(0.0).setLabel(_("Infill speed (mm/s)"), _("Speed at which infill parts are printed. If set to 0 then the print speed is used for the infill. Printing the infill faster can greatly reduce printing time, but this can negatively affect print quality."))
+setting('solidarea_speed',           0.0, float, 'advanced', _('Speed')).setRange(0.0).setLabel(_("Top/bottom speed (mm/s)"), _("Speed at which top/bottom parts are printed. If set to 0 then the print speed is used for the infill. Printing the top/bottom faster can greatly reduce printing time, but this can negatively affect print quality."))
 setting('inset0_speed',              0.0, float, 'advanced', _('Speed')).setRange(0.0).setLabel(_("Outer shell speed (mm/s)"), _("Speed at which outer shell is printed. If set to 0 then the print speed is used. Printing the outer shell at a lower speed improves the final skin quality. However, having a large difference between the inner shell speed and the outer shell speed will effect quality in a negative way."))
 setting('insetx_speed',              0.0, float, 'advanced', _('Speed')).setRange(0.0).setLabel(_("Inner shell speed (mm/s)"), _("Speed at which inner shells are printed. If set to 0 then the print speed is used. Printing the inner shell faster then the outer shell will reduce printing time. It is good to set this somewhere in between the outer shell speed and the infill/printing speed."))
 setting('cool_min_layer_time',         5, float, 'advanced', _('Cool')).setRange(0).setLabel(_("Minimal layer time (sec)"), _("Minimum time spent in a layer, gives the layer time to cool down before the next layer is put on top. If the layer will be placed down too fast the printer will slow down to make sure it has spent at least this amount of seconds printing this layer."))

diff --git a/Cura/util/sliceEngine.py b/Cura/util/sliceEngine.py
index 6425259eef98c7ab05cfa057380d971dfb07a763..91ba9a10804d15d5bb7bca41afcecb4d577ec06e 100644 (file)
--- a/Cura/util/sliceEngine.py
+++ b/Cura/util/sliceEngine.py
@@ -470,6 +470,7 @@ class Engine(object):
                        'infillSpeed': int(profile.getProfileSettingFloat('infill_speed')) if int(profile.getProfileSettingFloat('infill_speed')) > 0 else int(profile.getProfileSettingFloat('print_speed')),
                        'inset0Speed': int(profile.getProfileSettingFloat('inset0_speed')) if int(profile.getProfileSettingFloat('inset0_speed')) > 0 else int(profile.getProfileSettingFloat('print_speed')),
                        'insetXSpeed': int(profile.getProfileSettingFloat('insetx_speed')) if int(profile.getProfileSettingFloat('insetx_speed')) > 0 else int(profile.getProfileSettingFloat('print_speed')),
+                       'skinSpeed': int(profile.getProfileSettingFloat('solidarea_speed')) if int(profile.getProfileSettingFloat('solidarea_speed')) > 0 else int(profile.getProfileSettingFloat('print_speed')),
                        'moveSpeed': int(profile.getProfileSettingFloat('travel_speed')),
                        'fanSpeedMin': int(profile.getProfileSettingFloat('fan_speed')) if profile.getProfileSetting('fan_enabled') == 'True' else 0,
                        'fanSpeedMax': int(profile.getProfileSettingFloat('fan_speed_max')) if profile.getProfileSetting('fan_enabled') == 'True' else 0,