--- /dev/null
+[info]
+name = High detail
+order = 2
+profile_file = ../../../lulzbot_profiles/TAZ_single_extruder_0.35nozzle/CS-INOVA-1800_high-quality_TAZ_single-extruder_0.35noz_cura.ini
--- /dev/null
+[info]
+name = High speed
+order = 1
+profile_file = ../../../lulzbot_profiles/TAZ_single_extruder_0.35nozzle/CS-INOVA-1800_high-speed_TAZ_single-extruder_0.35noz_cura.ini
--- /dev/null
+[info]
+name = INOVA-1800 (ChromaStrand)
+material_types = Advanced
+order = 55
+description = Bed preparation required:
+ Apply a PVA-based glue stick
+ to bed surface before printing.
--- /dev/null
+[info]
+name = Standard
+order = 0
+profile_file = ../../../lulzbot_profiles/TAZ_single_extruder_0.35nozzle/CS-INOVA-1800_medium-quality_TAZ_single-extruder_0.35noz_cura.ini
[info]
name = PCTPE (Taulman)
material_types = Advanced
-order = 55
+order = 56
description = Bed preparation required:
Apply a PVA-based glue stick
to bed surface before printing.
[info]
name = t-glase (Taulman)
material_types = Advanced
-order = 57
+order = 58
description = Bed preparation required:
Apply a PVA-based glue stick
to bed surface before printing.
--- /dev/null
+[info]
+name = High detail
+order = 2
+profile_file = ../../../lulzbot_profiles/TAZ_single_extruder_0.5nozzle/bamboofill_high-quality_TAZ_single-extruder_0.5noz_cura.ini
--- /dev/null
+[info]
+name = High detail
+order = 2
+profile_file = ../../../lulzbot_profiles/TAZ_single_extruder_0.5nozzle/bronzefill_high-quality_TAZ_single-extruder_0.5noz_cura.ini
--- /dev/null
+[info]
+name = High speed
+order = 1
+profile_file = ../../../lulzbot_profiles/TAZ_single_extruder_0.5nozzle/bronzefill_high-speed_TAZ_single-extruder_0.5noz_cura.ini
--- /dev/null
+[info]
+name = Bronzefill (Colorfabb)
+material_types = Advanced
+order = 59
--- /dev/null
+[info]
+name = High detail
+order = 2
+profile_file = ../../../lulzbot_profiles/TAZ_single_extruder_0.5nozzle/copperfill_high-quality_TAZ_single-extruder_0.5noz_cura.ini
--- /dev/null
+[info]
+name = High speed
+order = 1
+profile_file = ../../../lulzbot_profiles/TAZ_single_extruder_0.5nozzle/copperfill_high-speed_TAZ_single-extruder_0.5noz_cura.ini
--- /dev/null
+[info]
+name = Copperfill (Colorfabb)
+material_types = Advanced
+order = 60
--- /dev/null
+[info]
+name = High detail
+order = 2
+profile_file = ../../../lulzbot_profiles/TAZ_single_extruder_0.5nozzle/CS-INOVA-1800_high-quality_TAZ_single-extruder_0.5noz_cura.ini
--- /dev/null
+[info]
+name = High speed
+order = 1
+profile_file = ../../../lulzbot_profiles/TAZ_single_extruder_0.5nozzle/CS-INOVA-1800_high-speed_TAZ_single-extruder_0.5noz_cura.ini
--- /dev/null
+[info]
+name = INOVA-1800 (ChromaStrand)
+material_types = Advanced
+order = 55
+description = Bed preparation required:
+ Apply a PVA-based glue stick
+ to bed surface before printing.
--- /dev/null
+[info]
+name = Standard
+order = 0
+profile_file = ../../../lulzbot_profiles/TAZ_single_extruder_0.5nozzle/CS-INOVA-1800_medium-quality_TAZ_single-extruder_0.5noz_cura.ini
[info]
name = PCTPE (Taulman)
material_types = Advanced
-order = 55
+order = 56
description = Bed preparation required:
Apply a PVA-based glue stick
to bed surface before printing.
[info]
name = t-glase (Taulman)
material_types = Advanced
-order = 57
+order = 58
description = Bed preparation required:
Apply a PVA-based glue stick
to bed surface before printing.
--- /dev/null
+[info]
+name = High detail
+order = 2
+profile_file = ../../../lulzbot_profiles/TAZ_single_extruder_0.5nozzle/woodfill_high-quality_TAZ_single-extruder_0.5noz_cura.ini
--- /dev/null
+[info]
+name = High speed
+order = 1
+profile_file = ../../../lulzbot_profiles/TAZ_single_extruder_0.5nozzle/woodfill_high-speed_TAZ_single-extruder_0.5noz_cura.ini
--- /dev/null
+[info]
+name = Woodfill (Colorfabb)
+material_types = Intermediate
+order = 15
--- /dev/null
+[info]
+name = High detail
+order = 2
+profile_file = ../../../lulzbot_profiles/TAZ_single_extruder_0.35nozzle/CS-INOVA-1800_high-quality_TAZ_single-extruder_0.35noz_cura.ini
--- /dev/null
+[info]
+name = High speed
+order = 1
+profile_file = ../../../lulzbot_profiles/TAZ_single_extruder_0.35nozzle/CS-INOVA-1800_high-speed_TAZ_single-extruder_0.35noz_cura.ini
--- /dev/null
+[info]
+name = INOVA-1800 (ChromaStrand)
+material_types = Advanced
+order = 55
+description = Bed preparation required:
+ Apply a PVA-based glue stick
+ to bed surface before printing.
--- /dev/null
+[info]
+name = Standard
+order = 0
+profile_file = ../../../lulzbot_profiles/TAZ_single_extruder_0.35nozzle/CS-INOVA-1800_medium-quality_TAZ_single-extruder_0.35noz_cura.ini
[info]
name = PCTPE (Taulman)
material_types = Advanced
-order = 55
+order = 56
description = Bed preparation required:
Apply a PVA-based glue stick
to bed surface before printing.
[info]
name = t-glase (Taulman)
material_types = Advanced
-order = 57
+order = 58
description = Bed preparation required:
Apply a PVA-based glue stick
to bed surface before printing.
--- /dev/null
+[info]
+name = High detail
+order = 2
+profile_file = ../../../lulzbot_profiles/TAZ_single_extruder_0.35nozzle/CS-INOVA-1800_high-quality_TAZ_single-extruder_0.35noz_cura.ini
--- /dev/null
+[info]
+name = High speed
+order = 1
+profile_file = ../../../lulzbot_profiles/TAZ_single_extruder_0.35nozzle/CS-INOVA-1800_high-speed_TAZ_single-extruder_0.35noz_cura.ini
--- /dev/null
+[info]
+name = INOVA-1800 (ChromaStrand)
+material_types = Advanced
+order = 55
+description = Bed preparation required:
+ Apply a PVA-based glue stick
+ to bed surface before printing.
--- /dev/null
+[info]
+name = Standard
+order = 0
+profile_file = ../../../lulzbot_profiles/TAZ_single_extruder_0.35nozzle/CS-INOVA-1800_medium-quality_TAZ_single-extruder_0.35noz_cura.ini
[info]
name = PCTPE (Taulman)
material_types = Advanced
-order = 55
+order = 56
description = Bed preparation required:
Apply a PVA-based glue stick
to bed surface before printing.
[info]
name = t-glase (Taulman)
material_types = Advanced
-order = 57
+order = 58
description = Bed preparation required:
Apply a PVA-based glue stick
to bed surface before printing.
--- /dev/null
+[info]
+name = High detail
+order = 2
+profile_file = ../../../lulzbot_profiles/TAZ_single_extruder_0.5nozzle/bamboofill_high-quality_TAZ_single-extruder_0.5noz_cura.ini
--- /dev/null
+[info]
+name = High detail
+order = 2
+profile_file = ../../../lulzbot_profiles/TAZ_single_extruder_0.5nozzle/bronzefill_high-quality_TAZ_single-extruder_0.5noz_cura.ini
--- /dev/null
+[info]
+name = High speed
+order = 1
+profile_file = ../../../lulzbot_profiles/TAZ_single_extruder_0.5nozzle/bronzefill_high-speed_TAZ_single-extruder_0.5noz_cura.ini
--- /dev/null
+[info]
+name = Bronzefill (Colorfabb)
+material_types = Advanced
+order = 59
--- /dev/null
+[info]
+name = High detail
+order = 2
+profile_file = ../../../lulzbot_profiles/TAZ_single_extruder_0.5nozzle/copperfill_high-quality_TAZ_single-extruder_0.5noz_cura.ini
--- /dev/null
+[info]
+name = High speed
+order = 1
+profile_file = ../../../lulzbot_profiles/TAZ_single_extruder_0.5nozzle/copperfill_high-speed_TAZ_single-extruder_0.5noz_cura.ini
--- /dev/null
+[info]
+name = Copperfill (Colorfabb)
+material_types = Advanced
+order = 60
--- /dev/null
+[info]
+name = High detail
+order = 2
+profile_file = ../../../lulzbot_profiles/TAZ_single_extruder_0.5nozzle/CS-INOVA-1800_high-quality_TAZ_single-extruder_0.5noz_cura.ini
--- /dev/null
+[info]
+name = High speed
+order = 1
+profile_file = ../../../lulzbot_profiles/TAZ_single_extruder_0.5nozzle/CS-INOVA-1800_high-speed_TAZ_single-extruder_0.5noz_cura.ini
--- /dev/null
+[info]
+name = INOVA-1800 (ChromaStrand)
+material_types = Advanced
+order = 55
+description = Bed preparation required:
+ Apply a PVA-based glue stick
+ to bed surface before printing.
--- /dev/null
+[info]
+name = Standard
+order = 0
+profile_file = ../../../lulzbot_profiles/TAZ_single_extruder_0.5nozzle/CS-INOVA-1800_medium-quality_TAZ_single-extruder_0.5noz_cura.ini
[info]
name = PCTPE (Taulman)
material_types = Advanced
-order = 55
+order = 56
description = Bed preparation required:
Apply a PVA-based glue stick
to bed surface before printing.
[info]
name = t-glase (Taulman)
material_types = Advanced
-order = 57
+order = 58
description = Bed preparation required:
Apply a PVA-based glue stick
to bed surface before printing.
--- /dev/null
+[info]
+name = High detail
+order = 2
+profile_file = ../../../lulzbot_profiles/TAZ_single_extruder_0.5nozzle/woodfill_high-quality_TAZ_single-extruder_0.5noz_cura.ini
--- /dev/null
+[info]
+name = High speed
+order = 1
+profile_file = ../../../lulzbot_profiles/TAZ_single_extruder_0.5nozzle/woodfill_high-speed_TAZ_single-extruder_0.5noz_cura.ini
--- /dev/null
+[info]
+name = Woodfill (Colorfabb)
+material_types = Intermediate
+order = 15
--- /dev/null
+[info]
+name = High detail
+order = 2
+profile_file = ../../../lulzbot_profiles/TAZ_single_extruder_0.35nozzle/CS-INOVA-1800_high-quality_TAZ_single-extruder_0.35noz_cura.ini
--- /dev/null
+[info]
+name = High speed
+order = 1
+profile_file = ../../../lulzbot_profiles/TAZ_single_extruder_0.35nozzle/CS-INOVA-1800_high-speed_TAZ_single-extruder_0.35noz_cura.ini
--- /dev/null
+[info]
+name = INOVA-1800 (ChromaStrand)
+material_types = Advanced
+order = 55
+description = Bed preparation required:
+ Apply a PVA-based glue stick
+ to bed surface before printing.
--- /dev/null
+[info]
+name = Standard
+order = 0
+profile_file = ../../../lulzbot_profiles/TAZ_single_extruder_0.35nozzle/CS-INOVA-1800_medium-quality_TAZ_single-extruder_0.35noz_cura.ini
[info]
name = PCTPE (Taulman)
material_types = Advanced
-order = 55
+order = 56
description = Bed preparation required:
Apply a PVA-based glue stick
to bed surface before printing.
[info]
name = t-glase (Taulman)
material_types = Advanced
-order = 57
+order = 58
description = Bed preparation required:
Apply a PVA-based glue stick
to bed surface before printing.
[info]
name = Bronzefill (Colorfabb)
material_types = Advanced
-order = 58
+order = 59
[info]
name = Copperfill (Colorfabb)
material_types = Advanced
-order = 59
+order = 60
--- /dev/null
+[info]
+name = High detail
+order = 2
+profile_file = ../../../lulzbot_profiles/Mini_single_extruder_v2/CS-INOVA-1800_high-quality_Mini_single-extruder-v2_0.5noz_cura.ini
--- /dev/null
+[info]
+name = High speed
+order = 1
+profile_file = ../../../lulzbot_profiles/Mini_single_extruder_v2/CS-INOVA-1800_high-speed_Mini_single-extruder-v2_0.5noz_cura.ini
--- /dev/null
+[info]
+name = INOVA-1800 (ChromaStrand)
+material_types = Advanced
+order = 55
+description = Bed preparation required:
+ Apply a PVA-based glue stick
+ to bed surface before printing.
--- /dev/null
+[info]
+name = Standard
+order = 0
+profile_file = ../../../lulzbot_profiles/Mini_single_extruder_v2/CS-INOVA-1800_medium-quality_Mini_single-extruder-v2_0.5noz_cura.ini
[info]
name = PC-ABS (Proto-pasta)
material_types = Advanced
-order = 56
+order = 57
description = Bed preparation required:
Apply a PVA-based glue stick
to bed surface before printing.
[info]
name = PCTPE (Taulman)
material_types = Advanced
-order = 55
+order = 56
description = Bed preparation required:
Apply a PVA-based glue stick
to bed surface before printing.
[info]
name = t-glase (Taulman)
material_types = Advanced
-order = 57
+order = 58
description = Bed preparation required:
Apply a PVA-based glue stick
to bed surface before printing.
--- /dev/null
+[profile]
+layer_height = 0.18
+wall_thickness = 1.0
+retraction_enable = True
+solid_layer_thickness = 1.08
+fill_density = 20
+perimeter_before_infill = True
+nozzle_size = 0.5
+print_speed = 50
+print_temperature = 230
+print_temperature2 = 0
+print_temperature3 = 0
+print_temperature4 = 0
+print_temperature5 = 0
+print_bed_temperature = 60
+support = None
+platform_adhesion = None
+support_dual_extrusion = Both
+wipe_tower = False
+wipe_tower_volume = 15
+ooze_shield = False
+filament_diameter = 2.85
+filament_diameter2 = 0
+filament_diameter3 = 0
+filament_diameter4 = 0
+filament_diameter5 = 0
+filament_flow = 100.0
+retraction_speed = 10
+retraction_amount = 1
+retraction_dual_amount = 16.5
+retraction_min_travel = 1.5
+retraction_combing = All
+retraction_minimal_extrusion = 0.005
+retraction_hop = 0.1
+bottom_thickness = 0.425
+layer0_width_factor = 125
+object_sink = 0.0
+overlap_dual = 0.15
+travel_speed = 175
+bottom_layer_speed = 8
+infill_speed = 30
+solidarea_speed = 20
+inset0_speed = 20
+insetx_speed = 25
+cool_min_layer_time = 15
+fan_enabled = True
+skirt_line_count = 1
+skirt_gap = 3.0
+skirt_minimal_length = 250
+fan_full_height = 0.5
+fan_speed = 75
+fan_speed_max = 100
+cool_min_feedrate = 10
+cool_head_lift = False
+solid_top = True
+solid_bottom = True
+fill_overlap = 15
+support_type = Lines
+support_angle = 45
+support_fill_rate = 30
+support_xy_distance = 0.7
+support_z_distance = 0.05
+spiralize = False
+simple_mode = False
+brim_line_count = 10
+raft_margin = 5.0
+raft_line_spacing = 3.0
+raft_base_thickness = 0.3
+raft_base_linewidth = 1.0
+raft_interface_thickness = 0.27
+raft_interface_linewidth = 0.4
+raft_airgap_all = 0.0
+raft_airgap = 0.5
+raft_surface_layers = 2
+raft_surface_thickness = 0.27
+raft_surface_linewidth = 0.4
+fix_horrible_union_all_type_a = True
+fix_horrible_union_all_type_b = False
+fix_horrible_use_open_bits = False
+fix_horrible_extensive_stitching = False
+plugin_config = (lp1
+ .
+object_center_x = -1
+object_center_y = -1
+
+[alterations]
+start.gcode = ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+ ;Print time: {print_time}
+ ;Filament used: {filament_amount}m {filament_weight}g
+ ;Filament cost: {filament_cost}
+ ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+ ;M109 S{print_temperature} ;Uncomment to add your own temperature line
+ G21 ; metric values
+ G90 ; absolute positioning
+ M82 ; set extruder to absolute mode
+ M107 ; start with the fan off
+ G92 E0 ; set extruder position to 0
+ M140 S{print_bed_temperature}; get bed heating up
+ G28 ; home all
+ M109 S150 ; set to cleaning temp and wait
+ G1 Z150 E-30 F75 ; suck up XXmm of filament
+ M109 S170 ; heat up rest of way
+ G1 X45 Y174 F11520 ; move behind scraper
+ G1 Z0 F1200 ; CRITICAL: set Z to height of top of scraper
+ G1 X45 Y174 Z-.5 F4000 ; wiping ; plunge into wipe pad
+ G1 X55 Y172 Z-.5 F4000 ; wiping
+ G1 X45 Y174 Z0 F4000 ; wiping
+ G1 X55 Y172 F4000 ; wiping
+ G1 X45 Y174 F4000 ; wiping
+ G1 X55 Y172 F4000 ; wiping
+ G1 X45 Y174 F4000 ; wiping
+ G1 X55 Y172 F4000 ; wiping
+ G1 X60 Y174 F4000 ; wiping
+ G1 X80 Y172 F4000 ; wiping
+ G1 X60 Y174 F4000 ; wiping
+ G1 X80 Y172 F4000 ; wiping
+ G1 X60 Y174 F4000 ; wiping
+ G1 X90 Y172 F4000 ; wiping
+ G1 X80 Y174 F4000 ; wiping
+ G1 X100 Y172 F4000 ; wiping
+ G1 X80 Y174 F4000 ; wiping
+ G1 X100 Y172 F4000 ; wiping
+ G1 X80 Y174 F4000 ; wiping
+ G1 X100 Y172 F4000 ; wiping
+ G1 X110 Y174 F4000 ; wiping
+ G1 X100 Y172 F4000 ; wiping
+ G1 X110 Y174 F4000 ; wiping
+ G1 X100 Y172 F4000 ; wiping
+ G1 X110 Y174 F4000 ; wiping
+ G1 X115 Y172 Z-0.5 F1000 ; wipe slower and bury noz in cleanish area
+ G1 Z10 ; raise z
+ G28 X0 Y0 ; home x and y
+ M109 S170 ; set to probing temp
+ M204 S300 ; set accel for probing
+ G29 ; Probe
+ M204 S2000 ; set accel back to normal
+ G1 X5 Y15 Z10 F5000 ; get out the way
+ M400 ; clear buffer
+ G4 S1 ; pause
+ M109 S{print_temperature} ; set extruder temp and wait
+ G4 S25 ; wait for bed to temp up
+ G1 Z2 E0 F75 ; extrude filament back into nozzle
+ M140 S{print_bed_temperature}; get bed temping up during first layer
+end.gcode = M400
+ M104 S0 ; Hotend off
+ M140 S0 ; heated bed heater off (if you have it)
+ M107 ; fans off
+ G92 E0 ; set extruder to 0
+ G1 E-3 F300 ; retract a bit to relieve pressure
+ G1 X5 Y5 Z156 F10000 ; move to cooling positioning
+ M190 R60 ; wait for bed to cool
+ M140 S0 ; turn off bed temp
+ G1 X145 Y175 Z156 F1000 ; move to cooling positioning
+ M84 ; steppers off
+ G90 ; absolute positioning
+ ;{profile_string}
+start2.gcode = ;Sliced at: {day} {date} {time}
+ ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+ ;Print time: {print_time}
+ ;Filament used: {filament_amount}m {filament_weight}g
+ ;Filament cost: {filament_cost}
+ ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+ ;M104 S{print_temperature} ;Uncomment to add your own temperature line
+ ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+ ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+ G21 ;metric values
+ G90 ;absolute positioning
+ M107 ;start with the fan off
+ G28 X0 Y0 ;move X/Y to min endstops
+ G28 Z0 ;move Z to min endstops
+ G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+ T1 ;Switch to the 2nd extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T0 ;Switch to the first extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F{travel_speed}
+ ;Put printing message on LCD screen
+ M117 Printing...
+end2.gcode = ;End GCode
+ M104 T0 S0 ;extruder heater off
+ M104 T1 S0 ;extruder heater off
+ M140 S0 ;heated bed heater off (if you have it)
+ G91 ;relative positioning
+ G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+ G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+ G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way
+ M84 ;steppers off
+ G90 ;absolute positioning
+ ;{profile_string}
+start3.gcode = ;Sliced at: {day} {date} {time}
+ ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+ ;Print time: {print_time}
+ ;Filament used: {filament_amount}m {filament_weight}g
+ ;Filament cost: {filament_cost}
+ ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+ ;M104 S{print_temperature} ;Uncomment to add your own temperature line
+ ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+ ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+ G21 ;metric values
+ G90 ;absolute positioning
+ M107 ;start with the fan off
+ G28 X0 Y0 ;move X/Y to min endstops
+ G28 Z0 ;move Z to min endstops
+ G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+ T2 ;Switch to the 2nd extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T1 ;Switch to the 2nd extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T0 ;Switch to the first extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F{travel_speed}
+ ;Put printing message on LCD screen
+ M117 Printing...
+end3.gcode = ;End GCode
+ M104 T0 S0 ;extruder heater off
+ M104 T1 S0 ;extruder heater off
+ M104 T2 S0 ;extruder heater off
+ M140 S0 ;heated bed heater off (if you have it)
+ G91 ;relative positioning
+ G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+ G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+ G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way
+ M84 ;steppers off
+ G90 ;absolute positioning
+ ;{profile_string}
+start4.gcode = ;Sliced at: {day} {date} {time}
+ ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+ ;Print time: {print_time}
+ ;Filament used: {filament_amount}m {filament_weight}g
+ ;Filament cost: {filament_cost}
+ ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+ ;M104 S{print_temperature} ;Uncomment to add your own temperature line
+ ;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line
+ ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+ ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+ G21 ;metric values
+ G90 ;absolute positioning
+ M107 ;start with the fan off
+ G28 X0 Y0 ;move X/Y to min endstops
+ G28 Z0 ;move Z to min endstops
+ G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+ T3 ;Switch to the 4th extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T2 ;Switch to the 3th extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T1 ;Switch to the 2nd extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T0 ;Switch to the first extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F{travel_speed}
+ ;Put printing message on LCD screen
+ M117 Printing...
+end4.gcode = ;End GCode
+ M104 T0 S0 ;extruder heater off
+ M104 T1 S0 ;extruder heater off
+ M104 T2 S0 ;extruder heater off
+ M104 T3 S0 ;extruder heater off
+ M140 S0 ;heated bed heater off (if you have it)
+ G91 ;relative positioning
+ G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+ G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+ G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way
+ M84 ;steppers off
+ G90 ;absolute positioning
+ ;{profile_string}
+support_start.gcode =
+support_end.gcode =
+cool_start.gcode =
+cool_end.gcode =
+replace.csv =
+preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+ ;This code is added before the T(n)
+postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+ ;This code is added after the T(n)
+
--- /dev/null
+[profile]
+layer_height = 0.38
+wall_thickness = 1.0
+retraction_enable = True
+solid_layer_thickness = 0.8
+fill_density = 20
+nozzle_size = 0.5
+print_speed = 50
+print_temperature = 240
+print_temperature2 = 0
+print_temperature3 = 0
+print_temperature4 = 0
+print_bed_temperature = 60
+support = None
+platform_adhesion = None
+support_dual_extrusion = Both
+wipe_tower = False
+wipe_tower_volume = 15
+ooze_shield = False
+filament_diameter = 2.85
+filament_diameter2 = 0
+filament_diameter3 = 0
+filament_diameter4 = 0
+filament_flow = 100.0
+retraction_speed = 10
+retraction_amount = 1
+retraction_dual_amount = 16.5
+retraction_min_travel = 1.5
+retraction_combing = All
+retraction_minimal_extrusion = 0.005
+retraction_hop = 0.1
+bottom_thickness = 0.425
+layer0_width_factor = 125
+object_sink = 0.0
+overlap_dual = 0.15
+travel_speed = 175
+bottom_layer_speed = 15
+infill_speed = 60
+solidarea_speed = 50
+inset0_speed = 50
+insetx_speed = 55
+cool_min_layer_time = 15
+fan_enabled = True
+skirt_line_count = 1
+skirt_gap = 3.0
+skirt_minimal_length = 250
+fan_full_height = 0.5
+fan_speed = 40
+fan_speed_max = 60
+cool_min_feedrate = 10
+cool_head_lift = False
+solid_top = True
+solid_bottom = True
+fill_overlap = 15
+support_type = Lines
+support_angle = 45
+support_fill_rate = 30
+support_xy_distance = 0.7
+support_z_distance = 0.05
+spiralize = False
+simple_mode = False
+brim_line_count = 10
+raft_margin = 5.0
+raft_line_spacing = 3.0
+raft_base_thickness = 0.3
+raft_base_linewidth = 1.0
+raft_interface_thickness = 0.27
+raft_interface_linewidth = 0.4
+raft_airgap = 0.5
+raft_surface_layers = 2
+fix_horrible_union_all_type_a = True
+fix_horrible_union_all_type_b = False
+fix_horrible_use_open_bits = False
+fix_horrible_extensive_stitching = False
+plugin_config = (lp1
+ .
+object_center_x = -1
+object_center_y = -1
+
+[alterations]
+start.gcode = ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+ ;Print time: {print_time}
+ ;Filament used: {filament_amount}m {filament_weight}g
+ ;Filament cost: {filament_cost}
+ ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+ ;M109 S{print_temperature} ;Uncomment to add your own temperature line
+ G21 ; metric values
+ G90 ; absolute positioning
+ M82 ; set extruder to absolute mode
+ M107 ; start with the fan off
+ G92 E0 ; set extruder position to 0
+ M140 S{print_bed_temperature}; get bed heating up
+ G28 ; home all
+ M109 S150 ; set to cleaning temp and wait
+ G1 Z150 E-30 F75 ; suck up XXmm of filament
+ M109 S170 ; heat up rest of way
+ G1 X45 Y174 F11520 ; move behind scraper
+ G1 Z0 F1200 ; CRITICAL: set Z to height of top of scraper
+ G1 X45 Y174 Z-.5 F4000 ; wiping ; plunge into wipe pad
+ G1 X55 Y172 Z-.5 F4000 ; wiping
+ G1 X45 Y174 Z0 F4000 ; wiping
+ G1 X55 Y172 F4000 ; wiping
+ G1 X45 Y174 F4000 ; wiping
+ G1 X55 Y172 F4000 ; wiping
+ G1 X45 Y174 F4000 ; wiping
+ G1 X55 Y172 F4000 ; wiping
+ G1 X60 Y174 F4000 ; wiping
+ G1 X80 Y172 F4000 ; wiping
+ G1 X60 Y174 F4000 ; wiping
+ G1 X80 Y172 F4000 ; wiping
+ G1 X60 Y174 F4000 ; wiping
+ G1 X90 Y172 F4000 ; wiping
+ G1 X80 Y174 F4000 ; wiping
+ G1 X100 Y172 F4000 ; wiping
+ G1 X80 Y174 F4000 ; wiping
+ G1 X100 Y172 F4000 ; wiping
+ G1 X80 Y174 F4000 ; wiping
+ G1 X100 Y172 F4000 ; wiping
+ G1 X110 Y174 F4000 ; wiping
+ G1 X100 Y172 F4000 ; wiping
+ G1 X110 Y174 F4000 ; wiping
+ G1 X100 Y172 F4000 ; wiping
+ G1 X110 Y174 F4000 ; wiping
+ G1 X115 Y172 Z-0.5 F1000 ; wipe slower and bury noz in cleanish area
+ G1 Z10 ; raise z
+ G28 X0 Y0 ; home x and y
+ M109 S170 ; set to probing temp
+ M204 S300 ; set accel for probing
+ G29 ; Probe
+ M204 S2000 ; set accel back to normal
+ G1 X5 Y15 Z10 F5000 ; get out the way
+ M400 ; clear buffer
+ G4 S1 ; pause
+ M109 S{print_temperature} ; set extruder temp and wait
+ G4 S25 ; wait for bed to temp up
+ G1 Z2 E0 F75 ; extrude filament back into nozzle
+ M140 S{print_bed_temperature}; get bed temping up during first layer
+end.gcode = M400
+ M104 S0 ; Hotend off
+ M140 S0 ; heated bed heater off (if you have it)
+ M107 ; fans off
+ G92 E0 ; set extruder to 0
+ G1 E-3 F300 ; retract a bit to relieve pressure
+ G1 X5 Y5 Z156 F10000 ; move to cooling positioning
+ M190 R60 ; wait for bed to cool
+ M140 S0 ; turn off bed temp
+ G1 X145 Y175 Z156 F1000 ; move to cooling positioning
+ M84 ; steppers off
+ G90 ; absolute positioning
+ ;{profile_string}
+start2.gcode = ;Sliced at: {day} {date} {time}
+ ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+ ;Print time: {print_time}
+ ;Filament used: {filament_amount}m {filament_weight}g
+ ;Filament cost: {filament_cost}
+ ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+ ;M104 S{print_temperature} ;Uncomment to add your own temperature line
+ ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+ ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+ G21 ;metric values
+ G90 ;absolute positioning
+ M107 ;start with the fan off
+ G28 X0 Y0 ;move X/Y to min endstops
+ G28 Z0 ;move Z to min endstops
+ G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+ T1 ;Switch to the 2nd extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T0 ;Switch to the first extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F{travel_speed}
+ ;Put printing message on LCD screen
+ M117 Printing...
+end2.gcode = ;End GCode
+ M104 T0 S0 ;extruder heater off
+ M104 T1 S0 ;extruder heater off
+ M140 S0 ;heated bed heater off (if you have it)
+ G91 ;relative positioning
+ G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+ G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+ G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way
+ M84 ;steppers off
+ G90 ;absolute positioning
+ ;{profile_string}
+start3.gcode = ;Sliced at: {day} {date} {time}
+ ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+ ;Print time: {print_time}
+ ;Filament used: {filament_amount}m {filament_weight}g
+ ;Filament cost: {filament_cost}
+ ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+ ;M104 S{print_temperature} ;Uncomment to add your own temperature line
+ ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+ ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+ G21 ;metric values
+ G90 ;absolute positioning
+ M107 ;start with the fan off
+ G28 X0 Y0 ;move X/Y to min endstops
+ G28 Z0 ;move Z to min endstops
+ G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+ T2 ;Switch to the 2nd extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T1 ;Switch to the 2nd extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T0 ;Switch to the first extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F{travel_speed}
+ ;Put printing message on LCD screen
+ M117 Printing...
+end3.gcode = ;End GCode
+ M104 T0 S0 ;extruder heater off
+ M104 T1 S0 ;extruder heater off
+ M104 T2 S0 ;extruder heater off
+ M140 S0 ;heated bed heater off (if you have it)
+ G91 ;relative positioning
+ G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+ G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+ G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way
+ M84 ;steppers off
+ G90 ;absolute positioning
+ ;{profile_string}
+start4.gcode = ;Sliced at: {day} {date} {time}
+ ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+ ;Print time: {print_time}
+ ;Filament used: {filament_amount}m {filament_weight}g
+ ;Filament cost: {filament_cost}
+ ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+ ;M104 S{print_temperature} ;Uncomment to add your own temperature line
+ ;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line
+ ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+ ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+ G21 ;metric values
+ G90 ;absolute positioning
+ M107 ;start with the fan off
+ G28 X0 Y0 ;move X/Y to min endstops
+ G28 Z0 ;move Z to min endstops
+ G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+ T3 ;Switch to the 4th extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T2 ;Switch to the 3th extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T1 ;Switch to the 2nd extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T0 ;Switch to the first extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F{travel_speed}
+ ;Put printing message on LCD screen
+ M117 Printing...
+end4.gcode = ;End GCode
+ M104 T0 S0 ;extruder heater off
+ M104 T1 S0 ;extruder heater off
+ M104 T2 S0 ;extruder heater off
+ M104 T3 S0 ;extruder heater off
+ M140 S0 ;heated bed heater off (if you have it)
+ G91 ;relative positioning
+ G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+ G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+ G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way
+ M84 ;steppers off
+ G90 ;absolute positioning
+ ;{profile_string}
+support_start.gcode =
+support_end.gcode =
+cool_start.gcode =
+cool_end.gcode =
+replace.csv =
+preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+ ;This code is added before the T(n)
+postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+ ;This code is added after the T(n)
+
--- /dev/null
+[profile]
+layer_height = 0.25
+wall_thickness = 1.0
+retraction_enable = True
+solid_layer_thickness = 0.8
+fill_density = 20
+nozzle_size = 0.5
+print_speed = 50
+print_temperature = 235
+print_temperature2 = 0
+print_temperature3 = 0
+print_temperature4 = 0
+print_bed_temperature = 60
+support = None
+platform_adhesion = None
+support_dual_extrusion = Both
+wipe_tower = False
+wipe_tower_volume = 15
+ooze_shield = False
+filament_diameter = 2.85
+filament_diameter2 = 0
+filament_diameter3 = 0
+filament_diameter4 = 0
+filament_flow = 100.0
+retraction_speed = 10
+retraction_amount = 1
+retraction_dual_amount = 16.5
+retraction_min_travel = 1.5
+retraction_combing = All
+retraction_minimal_extrusion = 0.005
+retraction_hop = 0.1
+bottom_thickness = 0.425
+layer0_width_factor = 125
+object_sink = 0.0
+overlap_dual = 0.15
+travel_speed = 175
+bottom_layer_speed = 10
+infill_speed = 40
+solidarea_speed = 35
+inset0_speed = 35
+insetx_speed = 37
+cool_min_layer_time = 15
+fan_enabled = True
+skirt_line_count = 1
+skirt_gap = 3.0
+skirt_minimal_length = 250
+fan_full_height = 0.5
+fan_speed = 40
+fan_speed_max = 60
+cool_min_feedrate = 10
+cool_head_lift = False
+solid_top = True
+solid_bottom = True
+fill_overlap = 15
+support_type = Lines
+support_angle = 45
+support_fill_rate = 30
+support_xy_distance = 0.7
+support_z_distance = 0.05
+spiralize = False
+simple_mode = False
+brim_line_count = 10
+raft_margin = 5.0
+raft_line_spacing = 3.0
+raft_base_thickness = 0.3
+raft_base_linewidth = 1.0
+raft_interface_thickness = 0.27
+raft_interface_linewidth = 0.4
+raft_airgap = 0.5
+raft_surface_layers = 2
+fix_horrible_union_all_type_a = True
+fix_horrible_union_all_type_b = False
+fix_horrible_use_open_bits = False
+fix_horrible_extensive_stitching = False
+plugin_config = (lp1
+ .
+object_center_x = -1
+object_center_y = -1
+
+[alterations]
+start.gcode = ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+ ;Print time: {print_time}
+ ;Filament used: {filament_amount}m {filament_weight}g
+ ;Filament cost: {filament_cost}
+ ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+ ;M109 S{print_temperature} ;Uncomment to add your own temperature line
+ G21 ; metric values
+ G90 ; absolute positioning
+ M82 ; set extruder to absolute mode
+ M107 ; start with the fan off
+ G92 E0 ; set extruder position to 0
+ M140 S{print_bed_temperature}; get bed heating up
+ G28 ; home all
+ M109 S150 ; set to cleaning temp and wait
+ G1 Z150 E-30 F75 ; suck up XXmm of filament
+ M109 S170 ; heat up rest of way
+ G1 X45 Y174 F11520 ; move behind scraper
+ G1 Z0 F1200 ; CRITICAL: set Z to height of top of scraper
+ G1 X45 Y174 Z-.5 F4000 ; wiping ; plunge into wipe pad
+ G1 X55 Y172 Z-.5 F4000 ; wiping
+ G1 X45 Y174 Z0 F4000 ; wiping
+ G1 X55 Y172 F4000 ; wiping
+ G1 X45 Y174 F4000 ; wiping
+ G1 X55 Y172 F4000 ; wiping
+ G1 X45 Y174 F4000 ; wiping
+ G1 X55 Y172 F4000 ; wiping
+ G1 X60 Y174 F4000 ; wiping
+ G1 X80 Y172 F4000 ; wiping
+ G1 X60 Y174 F4000 ; wiping
+ G1 X80 Y172 F4000 ; wiping
+ G1 X60 Y174 F4000 ; wiping
+ G1 X90 Y172 F4000 ; wiping
+ G1 X80 Y174 F4000 ; wiping
+ G1 X100 Y172 F4000 ; wiping
+ G1 X80 Y174 F4000 ; wiping
+ G1 X100 Y172 F4000 ; wiping
+ G1 X80 Y174 F4000 ; wiping
+ G1 X100 Y172 F4000 ; wiping
+ G1 X110 Y174 F4000 ; wiping
+ G1 X100 Y172 F4000 ; wiping
+ G1 X110 Y174 F4000 ; wiping
+ G1 X100 Y172 F4000 ; wiping
+ G1 X110 Y174 F4000 ; wiping
+ G1 X115 Y172 Z-0.5 F1000 ; wipe slower and bury noz in cleanish area
+ G1 Z10 ; raise z
+ G28 X0 Y0 ; home x and y
+ M109 S170 ; set to probing temp
+ M204 S300 ; set accel for probing
+ G29 ; Probe
+ M204 S2000 ; set accel back to normal
+ G1 X5 Y15 Z10 F5000 ; get out the way
+ M400 ; clear buffer
+ G4 S1 ; pause
+ M109 S{print_temperature} ; set extruder temp and wait
+ G4 S25 ; wait for bed to temp up
+ G1 Z2 E0 F75 ; extrude filament back into nozzle
+ M140 S{print_bed_temperature}; get bed temping up during first layer
+end.gcode = M400
+ M104 S0 ; Hotend off
+ M140 S0 ; heated bed heater off (if you have it)
+ M107 ; fans off
+ G92 E0 ; set extruder to 0
+ G1 E-3 F300 ; retract a bit to relieve pressure
+ G1 X5 Y5 Z156 F10000 ; move to cooling positioning
+ M190 R60 ; wait for bed to cool
+ M140 S0 ; turn off bed temp
+ G1 X145 Y175 Z156 F1000 ; move to cooling positioning
+ M84 ; steppers off
+ G90 ; absolute positioning
+ ;{profile_string}
+start2.gcode = ;Sliced at: {day} {date} {time}
+ ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+ ;Print time: {print_time}
+ ;Filament used: {filament_amount}m {filament_weight}g
+ ;Filament cost: {filament_cost}
+ ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+ ;M104 S{print_temperature} ;Uncomment to add your own temperature line
+ ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+ ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+ G21 ;metric values
+ G90 ;absolute positioning
+ M107 ;start with the fan off
+ G28 X0 Y0 ;move X/Y to min endstops
+ G28 Z0 ;move Z to min endstops
+ G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+ T1 ;Switch to the 2nd extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T0 ;Switch to the first extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F{travel_speed}
+ ;Put printing message on LCD screen
+ M117 Printing...
+end2.gcode = ;End GCode
+ M104 T0 S0 ;extruder heater off
+ M104 T1 S0 ;extruder heater off
+ M140 S0 ;heated bed heater off (if you have it)
+ G91 ;relative positioning
+ G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+ G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+ G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way
+ M84 ;steppers off
+ G90 ;absolute positioning
+ ;{profile_string}
+start3.gcode = ;Sliced at: {day} {date} {time}
+ ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+ ;Print time: {print_time}
+ ;Filament used: {filament_amount}m {filament_weight}g
+ ;Filament cost: {filament_cost}
+ ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+ ;M104 S{print_temperature} ;Uncomment to add your own temperature line
+ ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+ ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+ G21 ;metric values
+ G90 ;absolute positioning
+ M107 ;start with the fan off
+ G28 X0 Y0 ;move X/Y to min endstops
+ G28 Z0 ;move Z to min endstops
+ G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+ T2 ;Switch to the 2nd extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T1 ;Switch to the 2nd extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T0 ;Switch to the first extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F{travel_speed}
+ ;Put printing message on LCD screen
+ M117 Printing...
+end3.gcode = ;End GCode
+ M104 T0 S0 ;extruder heater off
+ M104 T1 S0 ;extruder heater off
+ M104 T2 S0 ;extruder heater off
+ M140 S0 ;heated bed heater off (if you have it)
+ G91 ;relative positioning
+ G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+ G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+ G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way
+ M84 ;steppers off
+ G90 ;absolute positioning
+ ;{profile_string}
+start4.gcode = ;Sliced at: {day} {date} {time}
+ ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+ ;Print time: {print_time}
+ ;Filament used: {filament_amount}m {filament_weight}g
+ ;Filament cost: {filament_cost}
+ ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+ ;M104 S{print_temperature} ;Uncomment to add your own temperature line
+ ;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line
+ ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+ ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+ G21 ;metric values
+ G90 ;absolute positioning
+ M107 ;start with the fan off
+ G28 X0 Y0 ;move X/Y to min endstops
+ G28 Z0 ;move Z to min endstops
+ G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+ T3 ;Switch to the 4th extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T2 ;Switch to the 3th extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T1 ;Switch to the 2nd extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T0 ;Switch to the first extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F{travel_speed}
+ ;Put printing message on LCD screen
+ M117 Printing...
+end4.gcode = ;End GCode
+ M104 T0 S0 ;extruder heater off
+ M104 T1 S0 ;extruder heater off
+ M104 T2 S0 ;extruder heater off
+ M104 T3 S0 ;extruder heater off
+ M140 S0 ;heated bed heater off (if you have it)
+ G91 ;relative positioning
+ G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+ G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+ G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way
+ M84 ;steppers off
+ G90 ;absolute positioning
+ ;{profile_string}
+support_start.gcode =
+support_end.gcode =
+cool_start.gcode =
+cool_end.gcode =
+replace.csv =
+preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+ ;This code is added before the T(n)
+postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+ ;This code is added after the T(n)
+
--- /dev/null
+[profile]
+layer_height = 0.14
+wall_thickness = 1.05
+retraction_enable = True
+solid_layer_thickness = 0.56
+fill_density = 20
+nozzle_size = 0.35
+print_speed = 50
+print_temperature = 0
+print_temperature2 = 0
+print_temperature3 = 0
+print_temperature4 = 0
+print_bed_temperature = 0
+support = None
+platform_adhesion = None
+support_dual_extrusion = Both
+wipe_tower = False
+wipe_tower_volume = 15
+ooze_shield = False
+filament_diameter = 2.85
+filament_diameter2 = 0
+filament_diameter3 = 0
+filament_diameter4 = 0
+filament_flow = 100.0
+retraction_speed = 10
+retraction_amount = 1
+retraction_dual_amount = 16.5
+retraction_min_travel = 1.5
+retraction_combing = All
+retraction_minimal_extrusion = 0.005
+retraction_hop = 0.1
+bottom_thickness = 0.425
+layer0_width_factor = 125
+object_sink = 0.0
+overlap_dual = 0.15
+travel_speed = 175
+bottom_layer_speed = 8
+infill_speed = 40
+solidarea_speed = 30
+inset0_speed = 30
+insetx_speed = 35
+cool_min_layer_time = 15
+fan_enabled = True
+skirt_line_count = 1
+skirt_gap = 3.0
+skirt_minimal_length = 250
+fan_full_height = 0.5
+fan_speed = 40
+fan_speed_max = 60
+cool_min_feedrate = 10
+cool_head_lift = False
+solid_top = True
+solid_bottom = True
+fill_overlap = 15
+support_type = Lines
+support_angle = 45
+support_fill_rate = 30
+support_xy_distance = 0.7
+support_z_distance = 0.05
+spiralize = False
+simple_mode = False
+brim_line_count = 10
+raft_margin = 5.0
+raft_line_spacing = 3.0
+raft_base_thickness = 0.3
+raft_base_linewidth = 1.0
+raft_interface_thickness = 0.27
+raft_interface_linewidth = 0.4
+raft_airgap = 0.5
+raft_surface_layers = 2
+fix_horrible_union_all_type_a = True
+fix_horrible_union_all_type_b = False
+fix_horrible_use_open_bits = False
+fix_horrible_extensive_stitching = False
+plugin_config = (lp1
+ .
+object_center_x = -1
+object_center_y = -1
+
+[alterations]
+start.gcode = ;Sliced at: {day} {date} {time}
+ ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+ ;Print time: {print_time}
+ ;Filament used: {filament_amount}m {filament_weight}g
+ ;Filament cost: {filament_cost}
+ ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+ ;M109 S{print_temperature} ;Uncomment to add your own temperature line
+ G21 ;metric values
+ G90 ;absolute positioning
+ M82 ;set extruder to absolute mode
+ M107 ;start with the fan off
+ G28 X0 Y0 ;move X/Y to min endstops
+ G28 Z0 ;move Z to min endstops
+ G1 Z15.0 F{travel_speed};move the platform down 15mm
+ G92 E0 ; zero the extruded length
+ G1 F200 E0 ; extrude 3mm of feed stock
+ G92 E0 ; zero the extruded length again
+ G1 F{travel_speed} ; set travel speed
+ M203 X192 Y208 Z3 ; speed limits
+ M117 Printing... ; send message to LCD
+end.gcode = M400
+ M104 S0 ; hotend off
+ M140 S0 ; heated bed heater off (if you have it)
+ M107 ; fans off
+ G91 ; relative positioning
+ G1 E-1 F300 ; retract the filament a bit before lifting the nozzle, to release some of the pressure
+ G1 Z+0.5 E-5 X-20 Y-20 F3000 ; move Z up a bit and retract filament even more
+ G90 ; absolute positioning
+ G1 X0 Y250 ; move to cooling position
+ M84 ; steppers off
+ G90 ; absolute positioning
+ M117 TAZ Ready.
+ ;{profile_string}
+start2.gcode = ;Sliced at: {day} {date} {time}
+ ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+ ;Print time: {print_time}
+ ;Filament used: {filament_amount}m {filament_weight}g
+ ;Filament cost: {filament_cost}
+ ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+ ;M104 S{print_temperature} ;Uncomment to add your own temperature line
+ ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+ ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+ G21 ;metric values
+ G90 ;absolute positioning
+ M107 ;start with the fan off
+ G28 X0 Y0 ;move X/Y to min endstops
+ G28 Z0 ;move Z to min endstops
+ G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+ T1 ;Switch to the 2nd extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T0 ;Switch to the first extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F{travel_speed}
+ ;Put printing message on LCD screen
+ M117 Printing...
+end2.gcode = ;End GCode
+ M104 T0 S0 ;extruder heater off
+ M104 T1 S0 ;extruder heater off
+ M140 S0 ;heated bed heater off (if you have it)
+ G91 ;relative positioning
+ G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+ G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+ G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way
+ M84 ;steppers off
+ G90 ;absolute positioning
+ ;{profile_string}
+start3.gcode = ;Sliced at: {day} {date} {time}
+ ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+ ;Print time: {print_time}
+ ;Filament used: {filament_amount}m {filament_weight}g
+ ;Filament cost: {filament_cost}
+ ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+ ;M104 S{print_temperature} ;Uncomment to add your own temperature line
+ ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+ ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+ G21 ;metric values
+ G90 ;absolute positioning
+ M107 ;start with the fan off
+ G28 X0 Y0 ;move X/Y to min endstops
+ G28 Z0 ;move Z to min endstops
+ G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+ T2 ;Switch to the 2nd extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T1 ;Switch to the 2nd extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T0 ;Switch to the first extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F{travel_speed}
+ ;Put printing message on LCD screen
+ M117 Printing...
+end3.gcode = ;End GCode
+ M104 T0 S0 ;extruder heater off
+ M104 T1 S0 ;extruder heater off
+ M104 T2 S0 ;extruder heater off
+ M140 S0 ;heated bed heater off (if you have it)
+ G91 ;relative positioning
+ G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+ G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+ G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way
+ M84 ;steppers off
+ G90 ;absolute positioning
+ ;{profile_string}
+start4.gcode = ;Sliced at: {day} {date} {time}
+ ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+ ;Print time: {print_time}
+ ;Filament used: {filament_amount}m {filament_weight}g
+ ;Filament cost: {filament_cost}
+ ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+ ;M104 S{print_temperature} ;Uncomment to add your own temperature line
+ ;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line
+ ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+ ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+ G21 ;metric values
+ G90 ;absolute positioning
+ M107 ;start with the fan off
+ G28 X0 Y0 ;move X/Y to min endstops
+ G28 Z0 ;move Z to min endstops
+ G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+ T3 ;Switch to the 4th extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T2 ;Switch to the 3th extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T1 ;Switch to the 2nd extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T0 ;Switch to the first extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F{travel_speed}
+ ;Put printing message on LCD screen
+ M117 Printing...
+end4.gcode = ;End GCode
+ M104 T0 S0 ;extruder heater off
+ M104 T1 S0 ;extruder heater off
+ M104 T2 S0 ;extruder heater off
+ M104 T3 S0 ;extruder heater off
+ M140 S0 ;heated bed heater off (if you have it)
+ G91 ;relative positioning
+ G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+ G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+ G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way
+ M84 ;steppers off
+ G90 ;absolute positioning
+ ;{profile_string}
+support_start.gcode =
+support_end.gcode =
+cool_start.gcode =
+cool_end.gcode =
+replace.csv =
+preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+ ;This code is added before the T(n)
+postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+ ;This code is added after the T(n)
+
--- /dev/null
+[profile]
+layer_height = 0.28
+wall_thickness = 1.05
+retraction_enable = True
+solid_layer_thickness = 0.6
+fill_density = 20
+nozzle_size = 0.35
+print_speed = 50
+print_temperature = 0
+print_temperature2 = 0
+print_temperature3 = 0
+print_temperature4 = 0
+print_bed_temperature = 0
+support = None
+platform_adhesion = None
+support_dual_extrusion = Both
+wipe_tower = False
+wipe_tower_volume = 15
+ooze_shield = False
+filament_diameter = 2.85
+filament_diameter2 = 0
+filament_diameter3 = 0
+filament_diameter4 = 0
+filament_flow = 100.0
+retraction_speed = 10
+retraction_amount = 1
+retraction_dual_amount = 16.5
+retraction_min_travel = 1.5
+retraction_combing = All
+retraction_minimal_extrusion = 0.005
+retraction_hop = 0.1
+bottom_thickness = 0.425
+layer0_width_factor = 125
+object_sink = 0.0
+overlap_dual = 0.15
+travel_speed = 175
+bottom_layer_speed = 15
+infill_speed = 60
+solidarea_speed = 50
+inset0_speed = 50
+insetx_speed = 55
+cool_min_layer_time = 15
+fan_enabled = True
+skirt_line_count = 1
+skirt_gap = 3.0
+skirt_minimal_length = 250
+fan_full_height = 0.5
+fan_speed = 40
+fan_speed_max = 60
+cool_min_feedrate = 10
+cool_head_lift = False
+solid_top = True
+solid_bottom = True
+fill_overlap = 15
+support_type = Lines
+support_angle = 45
+support_fill_rate = 30
+support_xy_distance = 0.7
+support_z_distance = 0.05
+spiralize = False
+simple_mode = False
+brim_line_count = 10
+raft_margin = 5.0
+raft_line_spacing = 3.0
+raft_base_thickness = 0.3
+raft_base_linewidth = 1.0
+raft_interface_thickness = 0.27
+raft_interface_linewidth = 0.4
+raft_airgap = 0.5
+raft_surface_layers = 2
+fix_horrible_union_all_type_a = True
+fix_horrible_union_all_type_b = False
+fix_horrible_use_open_bits = False
+fix_horrible_extensive_stitching = False
+plugin_config = (lp1
+ .
+object_center_x = -1
+object_center_y = -1
+
+[alterations]
+start.gcode = ;Sliced at: {day} {date} {time}
+ ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+ ;Print time: {print_time}
+ ;Filament used: {filament_amount}m {filament_weight}g
+ ;Filament cost: {filament_cost}
+ ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+ ;M109 S{print_temperature} ;Uncomment to add your own temperature line
+ G21 ;metric values
+ G90 ;absolute positioning
+ M82 ;set extruder to absolute mode
+ M107 ;start with the fan off
+ G28 X0 Y0 ;move X/Y to min endstops
+ G28 Z0 ;move Z to min endstops
+ G1 Z15.0 F{travel_speed};move the platform down 15mm
+ G92 E0 ; zero the extruded length
+ G1 F200 E0 ; extrude 3mm of feed stock
+ G92 E0 ; zero the extruded length again
+ G1 F{travel_speed} ; set travel speed
+ M203 X192 Y208 Z3 ; speed limits
+ M117 Printing... ; send message to LCD
+end.gcode = M400
+ M104 S0 ; hotend off
+ M140 S0 ; heated bed heater off (if you have it)
+ M107 ; fans off
+ G91 ; relative positioning
+ G1 E-1 F300 ; retract the filament a bit before lifting the nozzle, to release some of the pressure
+ G1 Z+0.5 E-5 X-20 Y-20 F3000 ; move Z up a bit and retract filament even more
+ G90 ; absolute positioning
+ G1 X0 Y250 ; move to cooling position
+ M84 ; steppers off
+ G90 ; absolute positioning
+ M117 TAZ Ready.
+ ;{profile_string}
+start2.gcode = ;Sliced at: {day} {date} {time}
+ ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+ ;Print time: {print_time}
+ ;Filament used: {filament_amount}m {filament_weight}g
+ ;Filament cost: {filament_cost}
+ ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+ ;M104 S{print_temperature} ;Uncomment to add your own temperature line
+ ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+ ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+ G21 ;metric values
+ G90 ;absolute positioning
+ M107 ;start with the fan off
+ G28 X0 Y0 ;move X/Y to min endstops
+ G28 Z0 ;move Z to min endstops
+ G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+ T1 ;Switch to the 2nd extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T0 ;Switch to the first extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F{travel_speed}
+ ;Put printing message on LCD screen
+ M117 Printing...
+end2.gcode = ;End GCode
+ M104 T0 S0 ;extruder heater off
+ M104 T1 S0 ;extruder heater off
+ M140 S0 ;heated bed heater off (if you have it)
+ G91 ;relative positioning
+ G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+ G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+ G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way
+ M84 ;steppers off
+ G90 ;absolute positioning
+ ;{profile_string}
+start3.gcode = ;Sliced at: {day} {date} {time}
+ ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+ ;Print time: {print_time}
+ ;Filament used: {filament_amount}m {filament_weight}g
+ ;Filament cost: {filament_cost}
+ ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+ ;M104 S{print_temperature} ;Uncomment to add your own temperature line
+ ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+ ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+ G21 ;metric values
+ G90 ;absolute positioning
+ M107 ;start with the fan off
+ G28 X0 Y0 ;move X/Y to min endstops
+ G28 Z0 ;move Z to min endstops
+ G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+ T2 ;Switch to the 2nd extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T1 ;Switch to the 2nd extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T0 ;Switch to the first extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F{travel_speed}
+ ;Put printing message on LCD screen
+ M117 Printing...
+end3.gcode = ;End GCode
+ M104 T0 S0 ;extruder heater off
+ M104 T1 S0 ;extruder heater off
+ M104 T2 S0 ;extruder heater off
+ M140 S0 ;heated bed heater off (if you have it)
+ G91 ;relative positioning
+ G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+ G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+ G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way
+ M84 ;steppers off
+ G90 ;absolute positioning
+ ;{profile_string}
+start4.gcode = ;Sliced at: {day} {date} {time}
+ ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+ ;Print time: {print_time}
+ ;Filament used: {filament_amount}m {filament_weight}g
+ ;Filament cost: {filament_cost}
+ ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+ ;M104 S{print_temperature} ;Uncomment to add your own temperature line
+ ;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line
+ ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+ ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+ G21 ;metric values
+ G90 ;absolute positioning
+ M107 ;start with the fan off
+ G28 X0 Y0 ;move X/Y to min endstops
+ G28 Z0 ;move Z to min endstops
+ G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+ T3 ;Switch to the 4th extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T2 ;Switch to the 3th extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T1 ;Switch to the 2nd extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T0 ;Switch to the first extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F{travel_speed}
+ ;Put printing message on LCD screen
+ M117 Printing...
+end4.gcode = ;End GCode
+ M104 T0 S0 ;extruder heater off
+ M104 T1 S0 ;extruder heater off
+ M104 T2 S0 ;extruder heater off
+ M104 T3 S0 ;extruder heater off
+ M140 S0 ;heated bed heater off (if you have it)
+ G91 ;relative positioning
+ G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+ G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+ G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way
+ M84 ;steppers off
+ G90 ;absolute positioning
+ ;{profile_string}
+support_start.gcode =
+support_end.gcode =
+cool_start.gcode =
+cool_end.gcode =
+replace.csv =
+preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+ ;This code is added before the T(n)
+postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+ ;This code is added after the T(n)
+
--- /dev/null
+[profile]
+layer_height = 0.22
+wall_thickness = 1.05
+retraction_enable = True
+solid_layer_thickness = 0.66
+fill_density = 20
+nozzle_size = 0.35
+print_speed = 50
+print_temperature = 0
+print_temperature2 = 0
+print_temperature3 = 0
+print_temperature4 = 0
+print_bed_temperature = 0
+support = None
+platform_adhesion = None
+support_dual_extrusion = Both
+wipe_tower = False
+wipe_tower_volume = 15
+ooze_shield = False
+filament_diameter = 2.85
+filament_diameter2 = 0
+filament_diameter3 = 0
+filament_diameter4 = 0
+filament_flow = 100.0
+retraction_speed = 10
+retraction_amount = 1
+retraction_dual_amount = 16.5
+retraction_min_travel = 1.5
+retraction_combing = All
+retraction_minimal_extrusion = 0.005
+retraction_hop = 0.1
+bottom_thickness = 0.425
+layer0_width_factor = 125
+object_sink = 0.0
+overlap_dual = 0.15
+travel_speed = 175
+bottom_layer_speed = 10
+infill_speed = 45
+solidarea_speed = 40
+inset0_speed = 40
+insetx_speed = 42
+cool_min_layer_time = 15
+fan_enabled = True
+skirt_line_count = 1
+skirt_gap = 3.0
+skirt_minimal_length = 250
+fan_full_height = 0.5
+fan_speed = 40
+fan_speed_max = 60
+cool_min_feedrate = 10
+cool_head_lift = False
+solid_top = True
+solid_bottom = True
+fill_overlap = 15
+support_type = Lines
+support_angle = 45
+support_fill_rate = 30
+support_xy_distance = 0.7
+support_z_distance = 0.05
+spiralize = False
+simple_mode = False
+brim_line_count = 10
+raft_margin = 5.0
+raft_line_spacing = 3.0
+raft_base_thickness = 0.3
+raft_base_linewidth = 1.0
+raft_interface_thickness = 0.27
+raft_interface_linewidth = 0.4
+raft_airgap = 0.5
+raft_surface_layers = 2
+fix_horrible_union_all_type_a = True
+fix_horrible_union_all_type_b = False
+fix_horrible_use_open_bits = False
+fix_horrible_extensive_stitching = False
+plugin_config = (lp1
+ .
+object_center_x = -1
+object_center_y = -1
+
+[alterations]
+start.gcode = ;Sliced at: {day} {date} {time}
+ ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+ ;Print time: {print_time}
+ ;Filament used: {filament_amount}m {filament_weight}g
+ ;Filament cost: {filament_cost}
+ ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+ ;M109 S{print_temperature} ;Uncomment to add your own temperature line
+ G21 ;metric values
+ G90 ;absolute positioning
+ M82 ;set extruder to absolute mode
+ M107 ;start with the fan off
+ G28 X0 Y0 ;move X/Y to min endstops
+ G28 Z0 ;move Z to min endstops
+ G1 Z15.0 F{travel_speed};move the platform down 15mm
+ G92 E0 ; zero the extruded length
+ G1 F200 E0 ; extrude 3mm of feed stock
+ G92 E0 ; zero the extruded length again
+ G1 F{travel_speed} ; set travel speed
+ M203 X192 Y208 Z3 ; speed limits
+ M117 Printing... ; send message to LCD
+end.gcode = M400
+ M104 S0 ; hotend off
+ M140 S0 ; heated bed heater off (if you have it)
+ M107 ; fans off
+ G91 ; relative positioning
+ G1 E-1 F300 ; retract the filament a bit before lifting the nozzle, to release some of the pressure
+ G1 Z+0.5 E-5 X-20 Y-20 F3000 ; move Z up a bit and retract filament even more
+ G90 ; absolute positioning
+ G1 X0 Y250 ; move to cooling position
+ M84 ; steppers off
+ G90 ; absolute positioning
+ M117 TAZ Ready.
+ ;{profile_string}
+start2.gcode = ;Sliced at: {day} {date} {time}
+ ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+ ;Print time: {print_time}
+ ;Filament used: {filament_amount}m {filament_weight}g
+ ;Filament cost: {filament_cost}
+ ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+ ;M104 S{print_temperature} ;Uncomment to add your own temperature line
+ ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+ ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+ G21 ;metric values
+ G90 ;absolute positioning
+ M107 ;start with the fan off
+ G28 X0 Y0 ;move X/Y to min endstops
+ G28 Z0 ;move Z to min endstops
+ G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+ T1 ;Switch to the 2nd extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T0 ;Switch to the first extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F{travel_speed}
+ ;Put printing message on LCD screen
+ M117 Printing...
+end2.gcode = ;End GCode
+ M104 T0 S0 ;extruder heater off
+ M104 T1 S0 ;extruder heater off
+ M140 S0 ;heated bed heater off (if you have it)
+ G91 ;relative positioning
+ G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+ G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+ G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way
+ M84 ;steppers off
+ G90 ;absolute positioning
+ ;{profile_string}
+start3.gcode = ;Sliced at: {day} {date} {time}
+ ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+ ;Print time: {print_time}
+ ;Filament used: {filament_amount}m {filament_weight}g
+ ;Filament cost: {filament_cost}
+ ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+ ;M104 S{print_temperature} ;Uncomment to add your own temperature line
+ ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+ ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+ G21 ;metric values
+ G90 ;absolute positioning
+ M107 ;start with the fan off
+ G28 X0 Y0 ;move X/Y to min endstops
+ G28 Z0 ;move Z to min endstops
+ G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+ T2 ;Switch to the 2nd extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T1 ;Switch to the 2nd extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T0 ;Switch to the first extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F{travel_speed}
+ ;Put printing message on LCD screen
+ M117 Printing...
+end3.gcode = ;End GCode
+ M104 T0 S0 ;extruder heater off
+ M104 T1 S0 ;extruder heater off
+ M104 T2 S0 ;extruder heater off
+ M140 S0 ;heated bed heater off (if you have it)
+ G91 ;relative positioning
+ G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+ G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+ G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way
+ M84 ;steppers off
+ G90 ;absolute positioning
+ ;{profile_string}
+start4.gcode = ;Sliced at: {day} {date} {time}
+ ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+ ;Print time: {print_time}
+ ;Filament used: {filament_amount}m {filament_weight}g
+ ;Filament cost: {filament_cost}
+ ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+ ;M104 S{print_temperature} ;Uncomment to add your own temperature line
+ ;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line
+ ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+ ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+ G21 ;metric values
+ G90 ;absolute positioning
+ M107 ;start with the fan off
+ G28 X0 Y0 ;move X/Y to min endstops
+ G28 Z0 ;move Z to min endstops
+ G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+ T3 ;Switch to the 4th extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T2 ;Switch to the 3th extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T1 ;Switch to the 2nd extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T0 ;Switch to the first extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F{travel_speed}
+ ;Put printing message on LCD screen
+ M117 Printing...
+end4.gcode = ;End GCode
+ M104 T0 S0 ;extruder heater off
+ M104 T1 S0 ;extruder heater off
+ M104 T2 S0 ;extruder heater off
+ M104 T3 S0 ;extruder heater off
+ M140 S0 ;heated bed heater off (if you have it)
+ G91 ;relative positioning
+ G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+ G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+ G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way
+ M84 ;steppers off
+ G90 ;absolute positioning
+ ;{profile_string}
+support_start.gcode =
+support_end.gcode =
+cool_start.gcode =
+cool_end.gcode =
+replace.csv =
+preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+ ;This code is added before the T(n)
+postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+ ;This code is added after the T(n)
+
--- /dev/null
+[profile]
+layer_height = 0.14
+wall_thickness = 1.0
+retraction_enable = True
+solid_layer_thickness = 0.8
+fill_density = 20
+nozzle_size = 0.5
+print_speed = 50
+print_temperature = 0
+print_temperature2 = 0
+print_temperature3 = 0
+print_temperature4 = 0
+print_bed_temperature = 0
+support = None
+platform_adhesion = None
+support_dual_extrusion = Both
+wipe_tower = False
+wipe_tower_volume = 15
+ooze_shield = False
+filament_diameter = 2.85
+filament_diameter2 = 0
+filament_diameter3 = 0
+filament_diameter4 = 0
+filament_flow = 100.0
+retraction_speed = 10
+retraction_amount = 1
+retraction_dual_amount = 16.5
+retraction_min_travel = 1.5
+retraction_combing = All
+retraction_minimal_extrusion = 0.005
+retraction_hop = 0.1
+bottom_thickness = 0.425
+layer0_width_factor = 125
+object_sink = 0.0
+overlap_dual = 0.15
+travel_speed = 175
+bottom_layer_speed = 8
+infill_speed = 30
+solidarea_speed = 20
+inset0_speed = 20
+insetx_speed = 25
+cool_min_layer_time = 15
+fan_enabled = True
+skirt_line_count = 1
+skirt_gap = 3.0
+skirt_minimal_length = 250
+fan_full_height = 0.5
+fan_speed = 50
+fan_speed_max = 70
+cool_min_feedrate = 10
+cool_head_lift = False
+solid_top = True
+solid_bottom = True
+fill_overlap = 15
+support_type = Lines
+support_angle = 45
+support_fill_rate = 30
+support_xy_distance = 0.7
+support_z_distance = 0.05
+spiralize = False
+simple_mode = False
+brim_line_count = 10
+raft_margin = 5.0
+raft_line_spacing = 3.0
+raft_base_thickness = 0.3
+raft_base_linewidth = 1.0
+raft_interface_thickness = 0.27
+raft_interface_linewidth = 0.4
+raft_airgap = 0.5
+raft_surface_layers = 2
+fix_horrible_union_all_type_a = True
+fix_horrible_union_all_type_b = False
+fix_horrible_use_open_bits = False
+fix_horrible_extensive_stitching = False
+plugin_config = (lp1
+ .
+object_center_x = -1
+object_center_y = -1
+
+[alterations]
+start.gcode = ;Sliced at: {day} {date} {time}
+ ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+ ;Print time: {print_time}
+ ;Filament used: {filament_amount}m {filament_weight}g
+ ;Filament cost: {filament_cost}
+ ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+ ;M109 S{print_temperature} ;Uncomment to add your own temperature line
+ G21 ;metric values
+ G90 ;absolute positioning
+ M82 ;set extruder to absolute mode
+ M107 ;start with the fan off
+ G28 X0 Y0 ;move X/Y to min endstops
+ G28 Z0 ;move Z to min endstops
+ G1 Z15.0 F{travel_speed};move the platform down 15mm
+ G92 E0 ; zero the extruded length
+ G1 F200 E0 ; extrude 3mm of feed stock
+ G92 E0 ; zero the extruded length again
+ G1 F{travel_speed} ; set travel speed
+ M203 X192 Y208 Z3 ; speed limits
+ M117 Printing... ; send message to LCD
+end.gcode = M400
+ M104 S0 ; hotend off
+ M140 S0 ; heated bed heater off (if you have it)
+ M107 ; fans off
+ G91 ; relative positioning
+ G1 E-1 F300 ; retract the filament a bit before lifting the nozzle, to release some of the pressure
+ G1 Z+0.5 E-5 X-20 Y-20 F3000 ; move Z up a bit and retract filament even more
+ G90 ; absolute positioning
+ G1 X0 Y250 ; move to cooling position
+ M84 ; steppers off
+ G90 ; absolute positioning
+ M117 TAZ Ready.
+ ;{profile_string}
+start2.gcode = ;Sliced at: {day} {date} {time}
+ ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+ ;Print time: {print_time}
+ ;Filament used: {filament_amount}m {filament_weight}g
+ ;Filament cost: {filament_cost}
+ ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+ ;M104 S{print_temperature} ;Uncomment to add your own temperature line
+ ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+ ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+ G21 ;metric values
+ G90 ;absolute positioning
+ M107 ;start with the fan off
+ G28 X0 Y0 ;move X/Y to min endstops
+ G28 Z0 ;move Z to min endstops
+ G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+ T1 ;Switch to the 2nd extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T0 ;Switch to the first extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F{travel_speed}
+ ;Put printing message on LCD screen
+ M117 Printing...
+end2.gcode = ;End GCode
+ M104 T0 S0 ;extruder heater off
+ M104 T1 S0 ;extruder heater off
+ M140 S0 ;heated bed heater off (if you have it)
+ G91 ;relative positioning
+ G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+ G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+ G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way
+ M84 ;steppers off
+ G90 ;absolute positioning
+ ;{profile_string}
+start3.gcode = ;Sliced at: {day} {date} {time}
+ ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+ ;Print time: {print_time}
+ ;Filament used: {filament_amount}m {filament_weight}g
+ ;Filament cost: {filament_cost}
+ ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+ ;M104 S{print_temperature} ;Uncomment to add your own temperature line
+ ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+ ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+ G21 ;metric values
+ G90 ;absolute positioning
+ M107 ;start with the fan off
+ G28 X0 Y0 ;move X/Y to min endstops
+ G28 Z0 ;move Z to min endstops
+ G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+ T2 ;Switch to the 2nd extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T1 ;Switch to the 2nd extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T0 ;Switch to the first extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F{travel_speed}
+ ;Put printing message on LCD screen
+ M117 Printing...
+end3.gcode = ;End GCode
+ M104 T0 S0 ;extruder heater off
+ M104 T1 S0 ;extruder heater off
+ M104 T2 S0 ;extruder heater off
+ M140 S0 ;heated bed heater off (if you have it)
+ G91 ;relative positioning
+ G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+ G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+ G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way
+ M84 ;steppers off
+ G90 ;absolute positioning
+ ;{profile_string}
+start4.gcode = ;Sliced at: {day} {date} {time}
+ ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+ ;Print time: {print_time}
+ ;Filament used: {filament_amount}m {filament_weight}g
+ ;Filament cost: {filament_cost}
+ ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+ ;M104 S{print_temperature} ;Uncomment to add your own temperature line
+ ;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line
+ ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+ ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+ G21 ;metric values
+ G90 ;absolute positioning
+ M107 ;start with the fan off
+ G28 X0 Y0 ;move X/Y to min endstops
+ G28 Z0 ;move Z to min endstops
+ G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+ T3 ;Switch to the 4th extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T2 ;Switch to the 3th extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T1 ;Switch to the 2nd extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T0 ;Switch to the first extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F{travel_speed}
+ ;Put printing message on LCD screen
+ M117 Printing...
+end4.gcode = ;End GCode
+ M104 T0 S0 ;extruder heater off
+ M104 T1 S0 ;extruder heater off
+ M104 T2 S0 ;extruder heater off
+ M104 T3 S0 ;extruder heater off
+ M140 S0 ;heated bed heater off (if you have it)
+ G91 ;relative positioning
+ G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+ G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+ G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way
+ M84 ;steppers off
+ G90 ;absolute positioning
+ ;{profile_string}
+support_start.gcode =
+support_end.gcode =
+cool_start.gcode =
+cool_end.gcode =
+replace.csv =
+preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+ ;This code is added before the T(n)
+postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+ ;This code is added after the T(n)
+
--- /dev/null
+[profile]
+layer_height = 0.38
+wall_thickness = 1.0
+retraction_enable = True
+solid_layer_thickness = 0.8
+fill_density = 20
+nozzle_size = 0.5
+print_speed = 50
+print_temperature = 0
+print_temperature2 = 0
+print_temperature3 = 0
+print_temperature4 = 0
+print_bed_temperature = 0
+support = None
+platform_adhesion = None
+support_dual_extrusion = Both
+wipe_tower = False
+wipe_tower_volume = 15
+ooze_shield = False
+filament_diameter = 2.85
+filament_diameter2 = 0
+filament_diameter3 = 0
+filament_diameter4 = 0
+filament_flow = 100.0
+retraction_speed = 10
+retraction_amount = 1
+retraction_dual_amount = 16.5
+retraction_min_travel = 1.5
+retraction_combing = All
+retraction_minimal_extrusion = 0.005
+retraction_hop = 0.1
+bottom_thickness = 0.425
+layer0_width_factor = 125
+object_sink = 0.0
+overlap_dual = 0.15
+travel_speed = 175
+bottom_layer_speed = 15
+infill_speed = 60
+solidarea_speed = 50
+inset0_speed = 50
+insetx_speed = 55
+cool_min_layer_time = 15
+fan_enabled = True
+skirt_line_count = 1
+skirt_gap = 3.0
+skirt_minimal_length = 250
+fan_full_height = 0.5
+fan_speed = 50
+fan_speed_max = 70
+cool_min_feedrate = 10
+cool_head_lift = False
+solid_top = True
+solid_bottom = True
+fill_overlap = 15
+support_type = Lines
+support_angle = 45
+support_fill_rate = 30
+support_xy_distance = 0.7
+support_z_distance = 0.05
+spiralize = False
+simple_mode = False
+brim_line_count = 10
+raft_margin = 5.0
+raft_line_spacing = 3.0
+raft_base_thickness = 0.3
+raft_base_linewidth = 1.0
+raft_interface_thickness = 0.27
+raft_interface_linewidth = 0.4
+raft_airgap = 0.5
+raft_surface_layers = 2
+fix_horrible_union_all_type_a = True
+fix_horrible_union_all_type_b = False
+fix_horrible_use_open_bits = False
+fix_horrible_extensive_stitching = False
+plugin_config = (lp1
+ .
+object_center_x = -1
+object_center_y = -1
+
+[alterations]
+start.gcode = ;Sliced at: {day} {date} {time}
+ ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+ ;Print time: {print_time}
+ ;Filament used: {filament_amount}m {filament_weight}g
+ ;Filament cost: {filament_cost}
+ ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+ ;M109 S{print_temperature} ;Uncomment to add your own temperature line
+ G21 ;metric values
+ G90 ;absolute positioning
+ M82 ;set extruder to absolute mode
+ M107 ;start with the fan off
+ G28 X0 Y0 ;move X/Y to min endstops
+ G28 Z0 ;move Z to min endstops
+ G1 Z15.0 F{travel_speed};move the platform down 15mm
+ G92 E0 ; zero the extruded length
+ G1 F200 E0 ; extrude 3mm of feed stock
+ G92 E0 ; zero the extruded length again
+ G1 F{travel_speed} ; set travel speed
+ M203 X192 Y208 Z3 ; speed limits
+ M117 Printing... ; send message to LCD
+end.gcode = M400
+ M104 S0 ; hotend off
+ M140 S0 ; heated bed heater off (if you have it)
+ M107 ; fans off
+ G91 ; relative positioning
+ G1 E-1 F300 ; retract the filament a bit before lifting the nozzle, to release some of the pressure
+ G1 Z+0.5 E-5 X-20 Y-20 F3000 ; move Z up a bit and retract filament even more
+ G90 ; absolute positioning
+ G1 X0 Y250 ; move to cooling position
+ M84 ; steppers off
+ G90 ; absolute positioning
+ M117 TAZ Ready.
+ ;{profile_string}
+start2.gcode = ;Sliced at: {day} {date} {time}
+ ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+ ;Print time: {print_time}
+ ;Filament used: {filament_amount}m {filament_weight}g
+ ;Filament cost: {filament_cost}
+ ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+ ;M104 S{print_temperature} ;Uncomment to add your own temperature line
+ ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+ ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+ G21 ;metric values
+ G90 ;absolute positioning
+ M107 ;start with the fan off
+ G28 X0 Y0 ;move X/Y to min endstops
+ G28 Z0 ;move Z to min endstops
+ G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+ T1 ;Switch to the 2nd extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T0 ;Switch to the first extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F{travel_speed}
+ ;Put printing message on LCD screen
+ M117 Printing...
+end2.gcode = ;End GCode
+ M104 T0 S0 ;extruder heater off
+ M104 T1 S0 ;extruder heater off
+ M140 S0 ;heated bed heater off (if you have it)
+ G91 ;relative positioning
+ G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+ G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+ G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way
+ M84 ;steppers off
+ G90 ;absolute positioning
+ ;{profile_string}
+start3.gcode = ;Sliced at: {day} {date} {time}
+ ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+ ;Print time: {print_time}
+ ;Filament used: {filament_amount}m {filament_weight}g
+ ;Filament cost: {filament_cost}
+ ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+ ;M104 S{print_temperature} ;Uncomment to add your own temperature line
+ ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+ ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+ G21 ;metric values
+ G90 ;absolute positioning
+ M107 ;start with the fan off
+ G28 X0 Y0 ;move X/Y to min endstops
+ G28 Z0 ;move Z to min endstops
+ G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+ T2 ;Switch to the 2nd extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T1 ;Switch to the 2nd extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T0 ;Switch to the first extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F{travel_speed}
+ ;Put printing message on LCD screen
+ M117 Printing...
+end3.gcode = ;End GCode
+ M104 T0 S0 ;extruder heater off
+ M104 T1 S0 ;extruder heater off
+ M104 T2 S0 ;extruder heater off
+ M140 S0 ;heated bed heater off (if you have it)
+ G91 ;relative positioning
+ G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+ G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+ G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way
+ M84 ;steppers off
+ G90 ;absolute positioning
+ ;{profile_string}
+start4.gcode = ;Sliced at: {day} {date} {time}
+ ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+ ;Print time: {print_time}
+ ;Filament used: {filament_amount}m {filament_weight}g
+ ;Filament cost: {filament_cost}
+ ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+ ;M104 S{print_temperature} ;Uncomment to add your own temperature line
+ ;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line
+ ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+ ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+ G21 ;metric values
+ G90 ;absolute positioning
+ M107 ;start with the fan off
+ G28 X0 Y0 ;move X/Y to min endstops
+ G28 Z0 ;move Z to min endstops
+ G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+ T3 ;Switch to the 4th extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T2 ;Switch to the 3th extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T1 ;Switch to the 2nd extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T0 ;Switch to the first extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F{travel_speed}
+ ;Put printing message on LCD screen
+ M117 Printing...
+end4.gcode = ;End GCode
+ M104 T0 S0 ;extruder heater off
+ M104 T1 S0 ;extruder heater off
+ M104 T2 S0 ;extruder heater off
+ M104 T3 S0 ;extruder heater off
+ M140 S0 ;heated bed heater off (if you have it)
+ G91 ;relative positioning
+ G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+ G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+ G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way
+ M84 ;steppers off
+ G90 ;absolute positioning
+ ;{profile_string}
+support_start.gcode =
+support_end.gcode =
+cool_start.gcode =
+cool_end.gcode =
+replace.csv =
+preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+ ;This code is added before the T(n)
+postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+ ;This code is added after the T(n)
+
--- /dev/null
+[profile]
+layer_height = 0.25
+wall_thickness = 1.0
+retraction_enable = True
+solid_layer_thickness = 0.8
+fill_density = 20
+nozzle_size = 0.5
+print_speed = 50
+print_temperature = 0
+print_temperature2 = 0
+print_temperature3 = 0
+print_temperature4 = 0
+print_bed_temperature = 0
+support = None
+platform_adhesion = None
+support_dual_extrusion = Both
+wipe_tower = False
+wipe_tower_volume = 15
+ooze_shield = False
+filament_diameter = 2.85
+filament_diameter2 = 0
+filament_diameter3 = 0
+filament_diameter4 = 0
+filament_flow = 100.0
+retraction_speed = 10
+retraction_amount = 1
+retraction_dual_amount = 16.5
+retraction_min_travel = 1.5
+retraction_combing = All
+retraction_minimal_extrusion = 0.005
+retraction_hop = 0.1
+bottom_thickness = 0.425
+layer0_width_factor = 125
+object_sink = 0.0
+overlap_dual = 0.15
+travel_speed = 175
+bottom_layer_speed = 10
+infill_speed = 40
+solidarea_speed = 35
+inset0_speed = 35
+insetx_speed = 37
+cool_min_layer_time = 15
+fan_enabled = True
+skirt_line_count = 1
+skirt_gap = 3.0
+skirt_minimal_length = 250
+fan_full_height = 0.5
+fan_speed = 50
+fan_speed_max = 70
+cool_min_feedrate = 10
+cool_head_lift = False
+solid_top = True
+solid_bottom = True
+fill_overlap = 15
+support_type = Lines
+support_angle = 45
+support_fill_rate = 30
+support_xy_distance = 0.7
+support_z_distance = 0.05
+spiralize = False
+simple_mode = False
+brim_line_count = 10
+raft_margin = 5.0
+raft_line_spacing = 3.0
+raft_base_thickness = 0.3
+raft_base_linewidth = 1.0
+raft_interface_thickness = 0.27
+raft_interface_linewidth = 0.4
+raft_airgap = 0.5
+raft_surface_layers = 2
+fix_horrible_union_all_type_a = True
+fix_horrible_union_all_type_b = False
+fix_horrible_use_open_bits = False
+fix_horrible_extensive_stitching = False
+plugin_config = (lp1
+ .
+object_center_x = -1
+object_center_y = -1
+
+[alterations]
+start.gcode = ;Sliced at: {day} {date} {time}
+ ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+ ;Print time: {print_time}
+ ;Filament used: {filament_amount}m {filament_weight}g
+ ;Filament cost: {filament_cost}
+ ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+ ;M109 S{print_temperature} ;Uncomment to add your own temperature line
+ G21 ;metric values
+ G90 ;absolute positioning
+ M82 ;set extruder to absolute mode
+ M107 ;start with the fan off
+ G28 X0 Y0 ;move X/Y to min endstops
+ G28 Z0 ;move Z to min endstops
+ G1 Z15.0 F{travel_speed};move the platform down 15mm
+ G92 E0 ; zero the extruded length
+ G1 F200 E0 ; extrude 3mm of feed stock
+ G92 E0 ; zero the extruded length again
+ G1 F{travel_speed} ; set travel speed
+ M203 X192 Y208 Z3 ; speed limits
+ M117 Printing... ; send message to LCD
+end.gcode = M400
+ M104 S0 ; hotend off
+ M140 S0 ; heated bed heater off (if you have it)
+ M107 ; fans off
+ G91 ; relative positioning
+ G1 E-1 F300 ; retract the filament a bit before lifting the nozzle, to release some of the pressure
+ G1 Z+0.5 E-5 X-20 Y-20 F3000 ; move Z up a bit and retract filament even more
+ G90 ; absolute positioning
+ G1 X0 Y250 ; move to cooling position
+ M84 ; steppers off
+ G90 ; absolute positioning
+ M117 TAZ Ready.
+ ;{profile_string}
+start2.gcode = ;Sliced at: {day} {date} {time}
+ ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+ ;Print time: {print_time}
+ ;Filament used: {filament_amount}m {filament_weight}g
+ ;Filament cost: {filament_cost}
+ ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+ ;M104 S{print_temperature} ;Uncomment to add your own temperature line
+ ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+ ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+ G21 ;metric values
+ G90 ;absolute positioning
+ M107 ;start with the fan off
+ G28 X0 Y0 ;move X/Y to min endstops
+ G28 Z0 ;move Z to min endstops
+ G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+ T1 ;Switch to the 2nd extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T0 ;Switch to the first extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F{travel_speed}
+ ;Put printing message on LCD screen
+ M117 Printing...
+end2.gcode = ;End GCode
+ M104 T0 S0 ;extruder heater off
+ M104 T1 S0 ;extruder heater off
+ M140 S0 ;heated bed heater off (if you have it)
+ G91 ;relative positioning
+ G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+ G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+ G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way
+ M84 ;steppers off
+ G90 ;absolute positioning
+ ;{profile_string}
+start3.gcode = ;Sliced at: {day} {date} {time}
+ ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+ ;Print time: {print_time}
+ ;Filament used: {filament_amount}m {filament_weight}g
+ ;Filament cost: {filament_cost}
+ ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+ ;M104 S{print_temperature} ;Uncomment to add your own temperature line
+ ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+ ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+ G21 ;metric values
+ G90 ;absolute positioning
+ M107 ;start with the fan off
+ G28 X0 Y0 ;move X/Y to min endstops
+ G28 Z0 ;move Z to min endstops
+ G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+ T2 ;Switch to the 2nd extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T1 ;Switch to the 2nd extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T0 ;Switch to the first extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F{travel_speed}
+ ;Put printing message on LCD screen
+ M117 Printing...
+end3.gcode = ;End GCode
+ M104 T0 S0 ;extruder heater off
+ M104 T1 S0 ;extruder heater off
+ M104 T2 S0 ;extruder heater off
+ M140 S0 ;heated bed heater off (if you have it)
+ G91 ;relative positioning
+ G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+ G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+ G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way
+ M84 ;steppers off
+ G90 ;absolute positioning
+ ;{profile_string}
+start4.gcode = ;Sliced at: {day} {date} {time}
+ ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+ ;Print time: {print_time}
+ ;Filament used: {filament_amount}m {filament_weight}g
+ ;Filament cost: {filament_cost}
+ ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+ ;M104 S{print_temperature} ;Uncomment to add your own temperature line
+ ;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line
+ ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+ ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+ G21 ;metric values
+ G90 ;absolute positioning
+ M107 ;start with the fan off
+ G28 X0 Y0 ;move X/Y to min endstops
+ G28 Z0 ;move Z to min endstops
+ G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+ T3 ;Switch to the 4th extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T2 ;Switch to the 3th extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T1 ;Switch to the 2nd extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T0 ;Switch to the first extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F{travel_speed}
+ ;Put printing message on LCD screen
+ M117 Printing...
+end4.gcode = ;End GCode
+ M104 T0 S0 ;extruder heater off
+ M104 T1 S0 ;extruder heater off
+ M104 T2 S0 ;extruder heater off
+ M104 T3 S0 ;extruder heater off
+ M140 S0 ;heated bed heater off (if you have it)
+ G91 ;relative positioning
+ G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+ G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+ G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way
+ M84 ;steppers off
+ G90 ;absolute positioning
+ ;{profile_string}
+support_start.gcode =
+support_end.gcode =
+cool_start.gcode =
+cool_end.gcode =
+replace.csv =
+preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+ ;This code is added before the T(n)
+postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+ ;This code is added after the T(n)
+
--- /dev/null
+[profile]
+layer_height = 0.22
+wall_thickness = 1
+retraction_enable = True
+solid_layer_thickness = 1
+fill_density = 20
+perimeter_before_infill = True
+nozzle_size = 0.5
+print_speed = 50
+print_temperature = 0
+print_temperature2 = 0
+print_temperature3 = 0
+print_temperature4 = 0
+print_temperature5 = 0
+print_bed_temperature = 0
+support = None
+platform_adhesion = None
+support_dual_extrusion = Both
+wipe_tower = False
+wipe_tower_volume = 15
+ooze_shield = False
+filament_diameter = 2.85
+filament_diameter2 = 0
+filament_diameter3 = 0
+filament_diameter4 = 0
+filament_diameter5 = 0
+filament_flow = 100.0
+retraction_speed = 10
+retraction_amount = 1.5
+retraction_dual_amount = 16.5
+retraction_min_travel = 1.5
+retraction_combing = All
+retraction_minimal_extrusion = 0.005
+retraction_hop = 0.1
+bottom_thickness = 0.425
+layer0_width_factor = 125
+object_sink = 0.0
+overlap_dual = 0.15
+travel_speed = 175
+bottom_layer_speed = 10
+infill_speed = 40
+solidarea_speed = 30
+inset0_speed = 30
+insetx_speed = 35
+cool_min_layer_time = 5
+fan_enabled = True
+skirt_line_count = 1
+skirt_gap = 3.0
+skirt_minimal_length = 250
+fan_full_height = 0.5
+fan_speed = 100
+fan_speed_max = 100
+cool_min_feedrate = 10
+cool_head_lift = False
+solid_top = True
+solid_bottom = True
+fill_overlap = 15
+support_type = Lines
+support_angle = 45
+support_fill_rate = 30
+support_xy_distance = 0.7
+support_z_distance = 0.05
+spiralize = False
+simple_mode = False
+brim_line_count = 10
+raft_margin = 5.0
+raft_line_spacing = 3.0
+raft_base_thickness = 0.3
+raft_base_linewidth = 1.0
+raft_interface_thickness = 0.27
+raft_interface_linewidth = 0.4
+raft_airgap_all = 0.0
+raft_airgap = 0.5
+raft_surface_layers = 2
+raft_surface_thickness = 0.27
+raft_surface_linewidth = 0.4
+fix_horrible_union_all_type_a = True
+fix_horrible_union_all_type_b = False
+fix_horrible_use_open_bits = False
+fix_horrible_extensive_stitching = False
+plugin_config =
+object_center_x = -1
+object_center_y = -1
+simplemodesettings =
+simplemodeprofile = 2_normal
+simplemodematerial = 1_pla
+simplemodematerialtype = Beginner
+
+[alterations]
+start.gcode = ;Sliced at: {day} {date} {time}
+ ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+ ;Print time: {print_time}
+ ;Filament used: {filament_amount}m {filament_weight}g
+ ;Filament cost: {filament_cost}
+ ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+ ;M109 S{print_temperature} ;Uncomment to add your own temperature line
+ G21 ;metric values
+ G90 ;absolute positioning
+ M82 ;set extruder to absolute mode
+ M107 ;start with the fan off
+ G28 X0 Y0 ;move X/Y to min endstops
+ G28 Z0 ;move Z to min endstops
+ G1 Z15.0 F{travel_speed};move the platform down 15mm
+ G92 E0 ; zero the extruded length
+ G1 F200 E0 ; extrude 3mm of feed stock
+ G92 E0 ; zero the extruded length again
+ G1 F{travel_speed} ; set travel speed
+ M203 X192 Y208 Z3 ; speed limits
+ M117 Printing... ; send message to LCD
+end.gcode = M400
+ M104 S0 ; hotend off
+ M140 S0 ; heated bed heater off (if you have it)
+ M107 ; fans off
+ G91 ; relative positioning
+ G1 E-1 F300 ; retract the filament a bit before lifting the nozzle, to release some of the pressure
+ G1 Z+0.5 E-5 X-20 Y-20 F3000 ; move Z up a bit and retract filament even more
+ G90 ; absolute positioning
+ G1 X0 Y250 ; move to cooling position
+ M84 ; steppers off
+ G90 ; absolute positioning
+ M117 TAZ Ready.
+ ;{profile_string}
+start2.gcode = ;Sliced at: {day} {date} {time}
+ ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+ ;Print time: {print_time}
+ ;Filament used: {filament_amount}m {filament_weight}g
+ ;Filament cost: {filament_cost}
+ ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+ ;M104 S{print_temperature} ;Uncomment to add your own temperature line
+ ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+ ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+ G21 ;metric values
+ G90 ;absolute positioning
+ M107 ;start with the fan off
+ G28 X0 Y0 ;move X/Y to min endstops
+ G28 Z0 ;move Z to min endstops
+ G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+ T1 ;Switch to the 2nd extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T0 ;Switch to the first extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F{travel_speed}
+ ;Put printing message on LCD screen
+ M117 Printing...
+end2.gcode = ;End GCode
+ M104 T0 S0 ;extruder heater off
+ M104 T1 S0 ;extruder heater off
+ M140 S0 ;heated bed heater off (if you have it)
+ G91 ;relative positioning
+ G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+ G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+ G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way
+ M84 ;steppers off
+ G90 ;absolute positioning
+ ;{profile_string}
+start3.gcode = ;Sliced at: {day} {date} {time}
+ ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+ ;Print time: {print_time}
+ ;Filament used: {filament_amount}m {filament_weight}g
+ ;Filament cost: {filament_cost}
+ ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+ ;M104 S{print_temperature} ;Uncomment to add your own temperature line
+ ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+ ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+ G21 ;metric values
+ G90 ;absolute positioning
+ M107 ;start with the fan off
+ G28 X0 Y0 ;move X/Y to min endstops
+ G28 Z0 ;move Z to min endstops
+ G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+ T2 ;Switch to the 2nd extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T1 ;Switch to the 2nd extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T0 ;Switch to the first extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F{travel_speed}
+ ;Put printing message on LCD screen
+ M117 Printing...
+end3.gcode = ;End GCode
+ M104 T0 S0 ;extruder heater off
+ M104 T1 S0 ;extruder heater off
+ M104 T2 S0 ;extruder heater off
+ M140 S0 ;heated bed heater off (if you have it)
+ G91 ;relative positioning
+ G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+ G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+ G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way
+ M84 ;steppers off
+ G90 ;absolute positioning
+ ;{profile_string}
+start4.gcode = ;Sliced at: {day} {date} {time}
+ ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+ ;Print time: {print_time}
+ ;Filament used: {filament_amount}m {filament_weight}g
+ ;Filament cost: {filament_cost}
+ ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+ ;M104 S{print_temperature} ;Uncomment to add your own temperature line
+ ;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line
+ ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+ ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+ G21 ;metric values
+ G90 ;absolute positioning
+ M107 ;start with the fan off
+ G28 X0 Y0 ;move X/Y to min endstops
+ G28 Z0 ;move Z to min endstops
+ G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+ T3 ;Switch to the 4th extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T2 ;Switch to the 3th extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T1 ;Switch to the 2nd extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T0 ;Switch to the first extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F{travel_speed}
+ ;Put printing message on LCD screen
+ M117 Printing...
+end4.gcode = ;End GCode
+ M104 T0 S0 ;extruder heater off
+ M104 T1 S0 ;extruder heater off
+ M104 T2 S0 ;extruder heater off
+ M104 T3 S0 ;extruder heater off
+ M140 S0 ;heated bed heater off (if you have it)
+ G91 ;relative positioning
+ G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+ G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+ G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way
+ M84 ;steppers off
+ G90 ;absolute positioning
+ ;{profile_string}
+support_start.gcode =
+support_end.gcode =
+cool_start.gcode =
+cool_end.gcode =
+replace.csv =
+preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+ ;This code is added before the T(n)
+postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+ ;This code is added after the T(n)
+
retraction_enable = True
solid_layer_thickness = 1
fill_density = 20
+perimeter_before_infill = True
nozzle_size = 0.5
print_speed = 50
print_temperature = 0
print_temperature2 = 0
print_temperature3 = 0
print_temperature4 = 0
+print_temperature5 = 0
print_bed_temperature = 0
support = None
platform_adhesion = None
filament_diameter2 = 0
filament_diameter3 = 0
filament_diameter4 = 0
+filament_diameter5 = 0
filament_flow = 100.0
retraction_speed = 10
retraction_amount = 1.5
solidarea_speed = 40
inset0_speed = 40
insetx_speed = 45
-cool_min_layer_time = 20
+cool_min_layer_time = 5
fan_enabled = True
skirt_line_count = 1
skirt_gap = 3.0
raft_base_linewidth = 1.0
raft_interface_thickness = 0.27
raft_interface_linewidth = 0.4
+raft_airgap_all = 0.0
raft_airgap = 0.5
raft_surface_layers = 2
+raft_surface_thickness = 0.27
+raft_surface_linewidth = 0.4
fix_horrible_union_all_type_a = True
fix_horrible_union_all_type_b = False
fix_horrible_use_open_bits = False
plugin_config =
object_center_x = -1
object_center_y = -1
+simplemodesettings =
+simplemodeprofile = 2_normal
+simplemodematerial = 1_pla
+simplemodematerialtype = Beginner
[alterations]
start.gcode = ;Sliced at: {day} {date} {time}
--- /dev/null
+[profile]
+layer_height = 0.25
+wall_thickness = 1
+retraction_enable = True
+solid_layer_thickness = 1.00
+fill_density = 20
+perimeter_before_infill = True
+nozzle_size = 0.5
+print_speed = 50
+print_temperature = 0
+print_temperature2 = 0
+print_temperature3 = 0
+print_temperature4 = 0
+print_temperature5 = 0
+print_bed_temperature = 0
+support = None
+platform_adhesion = None
+support_dual_extrusion = Both
+wipe_tower = False
+wipe_tower_volume = 15
+ooze_shield = False
+filament_diameter = 2.85
+filament_diameter2 = 0
+filament_diameter3 = 0
+filament_diameter4 = 0
+filament_diameter5 = 0
+filament_flow = 100.0
+retraction_speed = 10
+retraction_amount = 1.5
+retraction_dual_amount = 16.5
+retraction_min_travel = 1.5
+retraction_combing = All
+retraction_minimal_extrusion = 0.005
+retraction_hop = 0.1
+bottom_thickness = 0.38
+layer0_width_factor = 125
+object_sink = 0.0
+overlap_dual = 0.15
+travel_speed = 175
+bottom_layer_speed = 15
+infill_speed = 35
+solidarea_speed = 30
+inset0_speed = 25
+insetx_speed = 30
+cool_min_layer_time = 8
+fan_enabled = True
+skirt_line_count = 1
+skirt_gap = 3.0
+skirt_minimal_length = 250
+fan_full_height = 0.5
+fan_speed = 100
+fan_speed_max = 100
+cool_min_feedrate = 10
+cool_head_lift = False
+solid_top = True
+solid_bottom = True
+fill_overlap = 15
+support_type = Lines
+support_angle = 45
+support_fill_rate = 30
+support_xy_distance = 0.7
+support_z_distance = 0.05
+spiralize = False
+simple_mode = False
+brim_line_count = 10
+raft_margin = 5.0
+raft_line_spacing = 3.0
+raft_base_thickness = 0.3
+raft_base_linewidth = 1.0
+raft_interface_thickness = 0.27
+raft_interface_linewidth = 0.4
+raft_airgap_all = 0.0
+raft_airgap = 0.5
+raft_surface_layers = 2
+raft_surface_thickness = 0.27
+raft_surface_linewidth = 0.4
+fix_horrible_union_all_type_a = True
+fix_horrible_union_all_type_b = False
+fix_horrible_use_open_bits = False
+fix_horrible_extensive_stitching = False
+plugin_config =
+object_center_x = -1
+object_center_y = -1
+simplemodesettings =
+simplemodeprofile = 2_normal
+simplemodematerial = 1_pla
+simplemodematerialtype = Beginner
+
+[alterations]
+start.gcode = ;Sliced at: {day} {date} {time}
+ ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+ ;Print time: {print_time}
+ ;Filament used: {filament_amount}m {filament_weight}g
+ ;Filament cost: {filament_cost}
+ ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+ ;M109 S{print_temperature} ;Uncomment to add your own temperature line
+ G21 ;metric values
+ G90 ;absolute positioning
+ M82 ;set extruder to absolute mode
+ M107 ;start with the fan off
+ G28 X0 Y0 ;move X/Y to min endstops
+ G28 Z0 ;move Z to min endstops
+ G1 Z15.0 F{travel_speed};move the platform down 15mm
+ G92 E0 ; zero the extruded length
+ G1 F200 E0 ; extrude 3mm of feed stock
+ G92 E0 ; zero the extruded length again
+ G1 F{travel_speed} ; set travel speed
+ M203 X192 Y208 Z3 ; speed limits
+ M117 Printing... ; send message to LCD
+end.gcode = M400
+ M104 S0 ; hotend off
+ M140 S0 ; heated bed heater off (if you have it)
+ M107 ; fans off
+ G91 ; relative positioning
+ G1 E-1 F300 ; retract the filament a bit before lifting the nozzle, to release some of the pressure
+ G1 Z+0.5 E-5 X-20 Y-20 F3000 ; move Z up a bit and retract filament even more
+ G90 ; absolute positioning
+ G1 X0 Y250 ; move to cooling position
+ M84 ; steppers off
+ G90 ; absolute positioning
+ M117 TAZ Ready.
+ ;{profile_string}
+start2.gcode = ;Sliced at: {day} {date} {time}
+ ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+ ;Print time: {print_time}
+ ;Filament used: {filament_amount}m {filament_weight}g
+ ;Filament cost: {filament_cost}
+ ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+ ;M104 S{print_temperature} ;Uncomment to add your own temperature line
+ ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+ ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+ G21 ;metric values
+ G90 ;absolute positioning
+ M107 ;start with the fan off
+ G28 X0 Y0 ;move X/Y to min endstops
+ G28 Z0 ;move Z to min endstops
+ G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+ T1 ;Switch to the 2nd extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T0 ;Switch to the first extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F{travel_speed}
+ ;Put printing message on LCD screen
+ M117 Printing...
+end2.gcode = ;End GCode
+ M104 T0 S0 ;extruder heater off
+ M104 T1 S0 ;extruder heater off
+ M140 S0 ;heated bed heater off (if you have it)
+ G91 ;relative positioning
+ G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+ G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+ G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way
+ M84 ;steppers off
+ G90 ;absolute positioning
+ ;{profile_string}
+start3.gcode = ;Sliced at: {day} {date} {time}
+ ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+ ;Print time: {print_time}
+ ;Filament used: {filament_amount}m {filament_weight}g
+ ;Filament cost: {filament_cost}
+ ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+ ;M104 S{print_temperature} ;Uncomment to add your own temperature line
+ ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+ ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+ G21 ;metric values
+ G90 ;absolute positioning
+ M107 ;start with the fan off
+ G28 X0 Y0 ;move X/Y to min endstops
+ G28 Z0 ;move Z to min endstops
+ G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+ T2 ;Switch to the 2nd extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T1 ;Switch to the 2nd extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T0 ;Switch to the first extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F{travel_speed}
+ ;Put printing message on LCD screen
+ M117 Printing...
+end3.gcode = ;End GCode
+ M104 T0 S0 ;extruder heater off
+ M104 T1 S0 ;extruder heater off
+ M104 T2 S0 ;extruder heater off
+ M140 S0 ;heated bed heater off (if you have it)
+ G91 ;relative positioning
+ G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+ G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+ G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way
+ M84 ;steppers off
+ G90 ;absolute positioning
+ ;{profile_string}
+start4.gcode = ;Sliced at: {day} {date} {time}
+ ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+ ;Print time: {print_time}
+ ;Filament used: {filament_amount}m {filament_weight}g
+ ;Filament cost: {filament_cost}
+ ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+ ;M104 S{print_temperature} ;Uncomment to add your own temperature line
+ ;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line
+ ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+ ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+ G21 ;metric values
+ G90 ;absolute positioning
+ M107 ;start with the fan off
+ G28 X0 Y0 ;move X/Y to min endstops
+ G28 Z0 ;move Z to min endstops
+ G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+ T3 ;Switch to the 4th extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T2 ;Switch to the 3th extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T1 ;Switch to the 2nd extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T0 ;Switch to the first extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F{travel_speed}
+ ;Put printing message on LCD screen
+ M117 Printing...
+end4.gcode = ;End GCode
+ M104 T0 S0 ;extruder heater off
+ M104 T1 S0 ;extruder heater off
+ M104 T2 S0 ;extruder heater off
+ M104 T3 S0 ;extruder heater off
+ M140 S0 ;heated bed heater off (if you have it)
+ G91 ;relative positioning
+ G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+ G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+ G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way
+ M84 ;steppers off
+ G90 ;absolute positioning
+ ;{profile_string}
+support_start.gcode =
+support_end.gcode =
+cool_start.gcode =
+cool_end.gcode =
+replace.csv =
+preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+ ;This code is added before the T(n)
+postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+ ;This code is added after the T(n)
+
--- /dev/null
+[profile]
+layer_height = 0.38
+wall_thickness = 1
+retraction_enable = True
+solid_layer_thickness = 1.00
+fill_density = 20
+perimeter_before_infill = True
+nozzle_size = 0.5
+print_speed = 30
+print_temperature = 0
+print_temperature2 = 0
+print_temperature3 = 0
+print_temperature4 = 0
+print_temperature5 = 0
+print_bed_temperature = 0
+support = None
+platform_adhesion = None
+support_dual_extrusion = Both
+wipe_tower = False
+wipe_tower_volume = 15
+ooze_shield = False
+filament_diameter = 2.85
+filament_diameter2 = 0
+filament_diameter3 = 0
+filament_diameter4 = 0
+filament_diameter5 = 0
+filament_flow = 100.0
+retraction_speed = 10
+retraction_amount = 1.5
+retraction_dual_amount = 16.5
+retraction_min_travel = 1.5
+retraction_combing = All
+retraction_minimal_extrusion = 0.005
+retraction_hop = 0.1
+bottom_thickness = 0.38
+layer0_width_factor = 125
+object_sink = 0.0
+overlap_dual = 0.15
+travel_speed = 175
+bottom_layer_speed = 15
+infill_speed = 40
+solidarea_speed = 35
+inset0_speed = 30
+insetx_speed = 35
+cool_min_layer_time = 8
+fan_enabled = True
+skirt_line_count = 1
+skirt_gap = 3.0
+skirt_minimal_length = 250
+fan_full_height = 0.5
+fan_speed = 100
+fan_speed_max = 100
+cool_min_feedrate = 10
+cool_head_lift = False
+solid_top = True
+solid_bottom = True
+fill_overlap = 15
+support_type = Lines
+support_angle = 45
+support_fill_rate = 30
+support_xy_distance = 0.7
+support_z_distance = 0.05
+spiralize = False
+simple_mode = False
+brim_line_count = 10
+raft_margin = 5.0
+raft_line_spacing = 3.0
+raft_base_thickness = 0.3
+raft_base_linewidth = 1.0
+raft_interface_thickness = 0.27
+raft_interface_linewidth = 0.4
+raft_airgap_all = 0.0
+raft_airgap = 0.5
+raft_surface_layers = 2
+raft_surface_thickness = 0.27
+raft_surface_linewidth = 0.4
+fix_horrible_union_all_type_a = True
+fix_horrible_union_all_type_b = False
+fix_horrible_use_open_bits = False
+fix_horrible_extensive_stitching = False
+plugin_config =
+object_center_x = -1
+object_center_y = -1
+simplemodesettings =
+simplemodeprofile = 2_normal
+simplemodematerial = 1_pla
+simplemodematerialtype = Beginner
+
+[alterations]
+start.gcode = ;Sliced at: {day} {date} {time}
+ ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+ ;Print time: {print_time}
+ ;Filament used: {filament_amount}m {filament_weight}g
+ ;Filament cost: {filament_cost}
+ ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+ ;M109 S{print_temperature} ;Uncomment to add your own temperature line
+ G21 ;metric values
+ G90 ;absolute positioning
+ M82 ;set extruder to absolute mode
+ M107 ;start with the fan off
+ G28 X0 Y0 ;move X/Y to min endstops
+ G28 Z0 ;move Z to min endstops
+ G1 Z15.0 F{travel_speed};move the platform down 15mm
+ G92 E0 ; zero the extruded length
+ G1 F200 E0 ; extrude 3mm of feed stock
+ G92 E0 ; zero the extruded length again
+ G1 F{travel_speed} ; set travel speed
+ M203 X192 Y208 Z3 ; speed limits
+ M117 Printing... ; send message to LCD
+end.gcode = M400
+ M104 S0 ; hotend off
+ M140 S0 ; heated bed heater off (if you have it)
+ M107 ; fans off
+ G91 ; relative positioning
+ G1 E-1 F300 ; retract the filament a bit before lifting the nozzle, to release some of the pressure
+ G1 Z+0.5 E-5 X-20 Y-20 F3000 ; move Z up a bit and retract filament even more
+ G90 ; absolute positioning
+ G1 X0 Y250 ; move to cooling position
+ M84 ; steppers off
+ G90 ; absolute positioning
+ M117 TAZ Ready.
+ ;{profile_string}
+start2.gcode = ;Sliced at: {day} {date} {time}
+ ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+ ;Print time: {print_time}
+ ;Filament used: {filament_amount}m {filament_weight}g
+ ;Filament cost: {filament_cost}
+ ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+ ;M104 S{print_temperature} ;Uncomment to add your own temperature line
+ ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+ ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+ G21 ;metric values
+ G90 ;absolute positioning
+ M107 ;start with the fan off
+ G28 X0 Y0 ;move X/Y to min endstops
+ G28 Z0 ;move Z to min endstops
+ G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+ T1 ;Switch to the 2nd extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T0 ;Switch to the first extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F{travel_speed}
+ ;Put printing message on LCD screen
+ M117 Printing...
+end2.gcode = ;End GCode
+ M104 T0 S0 ;extruder heater off
+ M104 T1 S0 ;extruder heater off
+ M140 S0 ;heated bed heater off (if you have it)
+ G91 ;relative positioning
+ G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+ G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+ G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way
+ M84 ;steppers off
+ G90 ;absolute positioning
+ ;{profile_string}
+start3.gcode = ;Sliced at: {day} {date} {time}
+ ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+ ;Print time: {print_time}
+ ;Filament used: {filament_amount}m {filament_weight}g
+ ;Filament cost: {filament_cost}
+ ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+ ;M104 S{print_temperature} ;Uncomment to add your own temperature line
+ ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+ ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+ G21 ;metric values
+ G90 ;absolute positioning
+ M107 ;start with the fan off
+ G28 X0 Y0 ;move X/Y to min endstops
+ G28 Z0 ;move Z to min endstops
+ G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+ T2 ;Switch to the 2nd extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T1 ;Switch to the 2nd extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T0 ;Switch to the first extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F{travel_speed}
+ ;Put printing message on LCD screen
+ M117 Printing...
+end3.gcode = ;End GCode
+ M104 T0 S0 ;extruder heater off
+ M104 T1 S0 ;extruder heater off
+ M104 T2 S0 ;extruder heater off
+ M140 S0 ;heated bed heater off (if you have it)
+ G91 ;relative positioning
+ G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+ G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+ G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way
+ M84 ;steppers off
+ G90 ;absolute positioning
+ ;{profile_string}
+start4.gcode = ;Sliced at: {day} {date} {time}
+ ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+ ;Print time: {print_time}
+ ;Filament used: {filament_amount}m {filament_weight}g
+ ;Filament cost: {filament_cost}
+ ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+ ;M104 S{print_temperature} ;Uncomment to add your own temperature line
+ ;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line
+ ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+ ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+ G21 ;metric values
+ G90 ;absolute positioning
+ M107 ;start with the fan off
+ G28 X0 Y0 ;move X/Y to min endstops
+ G28 Z0 ;move Z to min endstops
+ G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+ T3 ;Switch to the 4th extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T2 ;Switch to the 3th extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T1 ;Switch to the 2nd extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T0 ;Switch to the first extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F{travel_speed}
+ ;Put printing message on LCD screen
+ M117 Printing...
+end4.gcode = ;End GCode
+ M104 T0 S0 ;extruder heater off
+ M104 T1 S0 ;extruder heater off
+ M104 T2 S0 ;extruder heater off
+ M104 T3 S0 ;extruder heater off
+ M140 S0 ;heated bed heater off (if you have it)
+ G91 ;relative positioning
+ G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+ G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+ G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way
+ M84 ;steppers off
+ G90 ;absolute positioning
+ ;{profile_string}
+support_start.gcode =
+support_end.gcode =
+cool_start.gcode =
+cool_end.gcode =
+replace.csv =
+preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+ ;This code is added before the T(n)
+postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+ ;This code is added after the T(n)
+
--- /dev/null
+[profile]
+layer_height = 0.25
+wall_thickness = 1
+retraction_enable = True
+solid_layer_thickness = 1.00
+fill_density = 20
+perimeter_before_infill = True
+nozzle_size = 0.5
+print_speed = 50
+print_temperature = 0
+print_temperature2 = 0
+print_temperature3 = 0
+print_temperature4 = 0
+print_temperature5 = 0
+print_bed_temperature = 0
+support = None
+platform_adhesion = None
+support_dual_extrusion = Both
+wipe_tower = False
+wipe_tower_volume = 15
+ooze_shield = False
+filament_diameter = 2.85
+filament_diameter2 = 0
+filament_diameter3 = 0
+filament_diameter4 = 0
+filament_diameter5 = 0
+filament_flow = 100.0
+retraction_speed = 10
+retraction_amount = 1.5
+retraction_dual_amount = 16.5
+retraction_min_travel = 1.5
+retraction_combing = All
+retraction_minimal_extrusion = 0.005
+retraction_hop = 0.1
+bottom_thickness = 0.38
+layer0_width_factor = 125
+object_sink = 0.0
+overlap_dual = 0.15
+travel_speed = 175
+bottom_layer_speed = 15
+infill_speed = 35
+solidarea_speed = 30
+inset0_speed = 25
+insetx_speed = 30
+cool_min_layer_time = 8
+fan_enabled = True
+skirt_line_count = 1
+skirt_gap = 3.0
+skirt_minimal_length = 250
+fan_full_height = 0.5
+fan_speed = 100
+fan_speed_max = 100
+cool_min_feedrate = 10
+cool_head_lift = False
+solid_top = True
+solid_bottom = True
+fill_overlap = 15
+support_type = Lines
+support_angle = 45
+support_fill_rate = 30
+support_xy_distance = 0.7
+support_z_distance = 0.05
+spiralize = False
+simple_mode = False
+brim_line_count = 10
+raft_margin = 5.0
+raft_line_spacing = 3.0
+raft_base_thickness = 0.3
+raft_base_linewidth = 1.0
+raft_interface_thickness = 0.27
+raft_interface_linewidth = 0.4
+raft_airgap_all = 0.0
+raft_airgap = 0.5
+raft_surface_layers = 2
+raft_surface_thickness = 0.27
+raft_surface_linewidth = 0.4
+fix_horrible_union_all_type_a = True
+fix_horrible_union_all_type_b = False
+fix_horrible_use_open_bits = False
+fix_horrible_extensive_stitching = False
+plugin_config =
+object_center_x = -1
+object_center_y = -1
+simplemodesettings =
+simplemodeprofile = 2_normal
+simplemodematerial = 1_pla
+simplemodematerialtype = Beginner
+
+[alterations]
+start.gcode = ;Sliced at: {day} {date} {time}
+ ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+ ;Print time: {print_time}
+ ;Filament used: {filament_amount}m {filament_weight}g
+ ;Filament cost: {filament_cost}
+ ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+ ;M109 S{print_temperature} ;Uncomment to add your own temperature line
+ G21 ;metric values
+ G90 ;absolute positioning
+ M82 ;set extruder to absolute mode
+ M107 ;start with the fan off
+ G28 X0 Y0 ;move X/Y to min endstops
+ G28 Z0 ;move Z to min endstops
+ G1 Z15.0 F{travel_speed};move the platform down 15mm
+ G92 E0 ; zero the extruded length
+ G1 F200 E0 ; extrude 3mm of feed stock
+ G92 E0 ; zero the extruded length again
+ G1 F{travel_speed} ; set travel speed
+ M203 X192 Y208 Z3 ; speed limits
+ M117 Printing... ; send message to LCD
+end.gcode = M400
+ M104 S0 ; hotend off
+ M140 S0 ; heated bed heater off (if you have it)
+ M107 ; fans off
+ G91 ; relative positioning
+ G1 E-1 F300 ; retract the filament a bit before lifting the nozzle, to release some of the pressure
+ G1 Z+0.5 E-5 X-20 Y-20 F3000 ; move Z up a bit and retract filament even more
+ G90 ; absolute positioning
+ G1 X0 Y250 ; move to cooling position
+ M84 ; steppers off
+ G90 ; absolute positioning
+ M117 TAZ Ready.
+ ;{profile_string}
+start2.gcode = ;Sliced at: {day} {date} {time}
+ ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+ ;Print time: {print_time}
+ ;Filament used: {filament_amount}m {filament_weight}g
+ ;Filament cost: {filament_cost}
+ ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+ ;M104 S{print_temperature} ;Uncomment to add your own temperature line
+ ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+ ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+ G21 ;metric values
+ G90 ;absolute positioning
+ M107 ;start with the fan off
+ G28 X0 Y0 ;move X/Y to min endstops
+ G28 Z0 ;move Z to min endstops
+ G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+ T1 ;Switch to the 2nd extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T0 ;Switch to the first extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F{travel_speed}
+ ;Put printing message on LCD screen
+ M117 Printing...
+end2.gcode = ;End GCode
+ M104 T0 S0 ;extruder heater off
+ M104 T1 S0 ;extruder heater off
+ M140 S0 ;heated bed heater off (if you have it)
+ G91 ;relative positioning
+ G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+ G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+ G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way
+ M84 ;steppers off
+ G90 ;absolute positioning
+ ;{profile_string}
+start3.gcode = ;Sliced at: {day} {date} {time}
+ ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+ ;Print time: {print_time}
+ ;Filament used: {filament_amount}m {filament_weight}g
+ ;Filament cost: {filament_cost}
+ ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+ ;M104 S{print_temperature} ;Uncomment to add your own temperature line
+ ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+ ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+ G21 ;metric values
+ G90 ;absolute positioning
+ M107 ;start with the fan off
+ G28 X0 Y0 ;move X/Y to min endstops
+ G28 Z0 ;move Z to min endstops
+ G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+ T2 ;Switch to the 2nd extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T1 ;Switch to the 2nd extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T0 ;Switch to the first extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F{travel_speed}
+ ;Put printing message on LCD screen
+ M117 Printing...
+end3.gcode = ;End GCode
+ M104 T0 S0 ;extruder heater off
+ M104 T1 S0 ;extruder heater off
+ M104 T2 S0 ;extruder heater off
+ M140 S0 ;heated bed heater off (if you have it)
+ G91 ;relative positioning
+ G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+ G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+ G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way
+ M84 ;steppers off
+ G90 ;absolute positioning
+ ;{profile_string}
+start4.gcode = ;Sliced at: {day} {date} {time}
+ ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+ ;Print time: {print_time}
+ ;Filament used: {filament_amount}m {filament_weight}g
+ ;Filament cost: {filament_cost}
+ ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+ ;M104 S{print_temperature} ;Uncomment to add your own temperature line
+ ;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line
+ ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+ ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+ G21 ;metric values
+ G90 ;absolute positioning
+ M107 ;start with the fan off
+ G28 X0 Y0 ;move X/Y to min endstops
+ G28 Z0 ;move Z to min endstops
+ G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+ T3 ;Switch to the 4th extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T2 ;Switch to the 3th extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T1 ;Switch to the 2nd extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T0 ;Switch to the first extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F{travel_speed}
+ ;Put printing message on LCD screen
+ M117 Printing...
+end4.gcode = ;End GCode
+ M104 T0 S0 ;extruder heater off
+ M104 T1 S0 ;extruder heater off
+ M104 T2 S0 ;extruder heater off
+ M104 T3 S0 ;extruder heater off
+ M140 S0 ;heated bed heater off (if you have it)
+ G91 ;relative positioning
+ G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+ G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+ G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way
+ M84 ;steppers off
+ G90 ;absolute positioning
+ ;{profile_string}
+support_start.gcode =
+support_end.gcode =
+cool_start.gcode =
+cool_end.gcode =
+replace.csv =
+preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+ ;This code is added before the T(n)
+postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+ ;This code is added after the T(n)
+
--- /dev/null
+[profile]
+layer_height = 0.38
+wall_thickness = 1
+retraction_enable = True
+solid_layer_thickness = 1.00
+fill_density = 20
+perimeter_before_infill = True
+nozzle_size = 0.5
+print_speed = 30
+print_temperature = 0
+print_temperature2 = 0
+print_temperature3 = 0
+print_temperature4 = 0
+print_temperature5 = 0
+print_bed_temperature = 0
+support = None
+platform_adhesion = None
+support_dual_extrusion = Both
+wipe_tower = False
+wipe_tower_volume = 15
+ooze_shield = False
+filament_diameter = 2.85
+filament_diameter2 = 0
+filament_diameter3 = 0
+filament_diameter4 = 0
+filament_diameter5 = 0
+filament_flow = 100.0
+retraction_speed = 10
+retraction_amount = 1.5
+retraction_dual_amount = 16.5
+retraction_min_travel = 1.5
+retraction_combing = All
+retraction_minimal_extrusion = 0.005
+retraction_hop = 0.1
+bottom_thickness = 0.38
+layer0_width_factor = 125
+object_sink = 0.0
+overlap_dual = 0.15
+travel_speed = 175
+bottom_layer_speed = 15
+infill_speed = 40
+solidarea_speed = 35
+inset0_speed = 30
+insetx_speed = 35
+cool_min_layer_time = 8
+fan_enabled = True
+skirt_line_count = 1
+skirt_gap = 3.0
+skirt_minimal_length = 250
+fan_full_height = 0.5
+fan_speed = 100
+fan_speed_max = 100
+cool_min_feedrate = 10
+cool_head_lift = False
+solid_top = True
+solid_bottom = True
+fill_overlap = 15
+support_type = Lines
+support_angle = 45
+support_fill_rate = 30
+support_xy_distance = 0.7
+support_z_distance = 0.05
+spiralize = False
+simple_mode = False
+brim_line_count = 10
+raft_margin = 5.0
+raft_line_spacing = 3.0
+raft_base_thickness = 0.3
+raft_base_linewidth = 1.0
+raft_interface_thickness = 0.27
+raft_interface_linewidth = 0.4
+raft_airgap_all = 0.0
+raft_airgap = 0.5
+raft_surface_layers = 2
+raft_surface_thickness = 0.27
+raft_surface_linewidth = 0.4
+fix_horrible_union_all_type_a = True
+fix_horrible_union_all_type_b = False
+fix_horrible_use_open_bits = False
+fix_horrible_extensive_stitching = False
+plugin_config =
+object_center_x = -1
+object_center_y = -1
+simplemodesettings =
+simplemodeprofile = 2_normal
+simplemodematerial = 1_pla
+simplemodematerialtype = Beginner
+
+[alterations]
+start.gcode = ;Sliced at: {day} {date} {time}
+ ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+ ;Print time: {print_time}
+ ;Filament used: {filament_amount}m {filament_weight}g
+ ;Filament cost: {filament_cost}
+ ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+ ;M109 S{print_temperature} ;Uncomment to add your own temperature line
+ G21 ;metric values
+ G90 ;absolute positioning
+ M82 ;set extruder to absolute mode
+ M107 ;start with the fan off
+ G28 X0 Y0 ;move X/Y to min endstops
+ G28 Z0 ;move Z to min endstops
+ G1 Z15.0 F{travel_speed};move the platform down 15mm
+ G92 E0 ; zero the extruded length
+ G1 F200 E0 ; extrude 3mm of feed stock
+ G92 E0 ; zero the extruded length again
+ G1 F{travel_speed} ; set travel speed
+ M203 X192 Y208 Z3 ; speed limits
+ M117 Printing... ; send message to LCD
+end.gcode = M400
+ M104 S0 ; hotend off
+ M140 S0 ; heated bed heater off (if you have it)
+ M107 ; fans off
+ G91 ; relative positioning
+ G1 E-1 F300 ; retract the filament a bit before lifting the nozzle, to release some of the pressure
+ G1 Z+0.5 E-5 X-20 Y-20 F3000 ; move Z up a bit and retract filament even more
+ G90 ; absolute positioning
+ G1 X0 Y250 ; move to cooling position
+ M84 ; steppers off
+ G90 ; absolute positioning
+ M117 TAZ Ready.
+ ;{profile_string}
+start2.gcode = ;Sliced at: {day} {date} {time}
+ ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+ ;Print time: {print_time}
+ ;Filament used: {filament_amount}m {filament_weight}g
+ ;Filament cost: {filament_cost}
+ ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+ ;M104 S{print_temperature} ;Uncomment to add your own temperature line
+ ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+ ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+ G21 ;metric values
+ G90 ;absolute positioning
+ M107 ;start with the fan off
+ G28 X0 Y0 ;move X/Y to min endstops
+ G28 Z0 ;move Z to min endstops
+ G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+ T1 ;Switch to the 2nd extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T0 ;Switch to the first extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F{travel_speed}
+ ;Put printing message on LCD screen
+ M117 Printing...
+end2.gcode = ;End GCode
+ M104 T0 S0 ;extruder heater off
+ M104 T1 S0 ;extruder heater off
+ M140 S0 ;heated bed heater off (if you have it)
+ G91 ;relative positioning
+ G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+ G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+ G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way
+ M84 ;steppers off
+ G90 ;absolute positioning
+ ;{profile_string}
+start3.gcode = ;Sliced at: {day} {date} {time}
+ ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+ ;Print time: {print_time}
+ ;Filament used: {filament_amount}m {filament_weight}g
+ ;Filament cost: {filament_cost}
+ ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+ ;M104 S{print_temperature} ;Uncomment to add your own temperature line
+ ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+ ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+ G21 ;metric values
+ G90 ;absolute positioning
+ M107 ;start with the fan off
+ G28 X0 Y0 ;move X/Y to min endstops
+ G28 Z0 ;move Z to min endstops
+ G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+ T2 ;Switch to the 2nd extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T1 ;Switch to the 2nd extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T0 ;Switch to the first extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F{travel_speed}
+ ;Put printing message on LCD screen
+ M117 Printing...
+end3.gcode = ;End GCode
+ M104 T0 S0 ;extruder heater off
+ M104 T1 S0 ;extruder heater off
+ M104 T2 S0 ;extruder heater off
+ M140 S0 ;heated bed heater off (if you have it)
+ G91 ;relative positioning
+ G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+ G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+ G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way
+ M84 ;steppers off
+ G90 ;absolute positioning
+ ;{profile_string}
+start4.gcode = ;Sliced at: {day} {date} {time}
+ ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+ ;Print time: {print_time}
+ ;Filament used: {filament_amount}m {filament_weight}g
+ ;Filament cost: {filament_cost}
+ ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+ ;M104 S{print_temperature} ;Uncomment to add your own temperature line
+ ;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line
+ ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+ ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+ G21 ;metric values
+ G90 ;absolute positioning
+ M107 ;start with the fan off
+ G28 X0 Y0 ;move X/Y to min endstops
+ G28 Z0 ;move Z to min endstops
+ G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+ T3 ;Switch to the 4th extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T2 ;Switch to the 3th extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T1 ;Switch to the 2nd extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T0 ;Switch to the first extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F{travel_speed}
+ ;Put printing message on LCD screen
+ M117 Printing...
+end4.gcode = ;End GCode
+ M104 T0 S0 ;extruder heater off
+ M104 T1 S0 ;extruder heater off
+ M104 T2 S0 ;extruder heater off
+ M104 T3 S0 ;extruder heater off
+ M140 S0 ;heated bed heater off (if you have it)
+ G91 ;relative positioning
+ G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+ G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+ G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way
+ M84 ;steppers off
+ G90 ;absolute positioning
+ ;{profile_string}
+support_start.gcode =
+support_end.gcode =
+cool_start.gcode =
+cool_end.gcode =
+replace.csv =
+preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+ ;This code is added before the T(n)
+postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+ ;This code is added after the T(n)
+
--- /dev/null
+[profile]
+layer_height = 0.22
+wall_thickness = 1
+retraction_enable = True
+solid_layer_thickness = 1
+fill_density = 20
+perimeter_before_infill = True
+nozzle_size = 0.5
+print_speed = 50
+print_temperature = 0
+print_temperature2 = 0
+print_temperature3 = 0
+print_temperature4 = 0
+print_temperature5 = 0
+print_bed_temperature = 0
+support = None
+platform_adhesion = None
+support_dual_extrusion = Both
+wipe_tower = False
+wipe_tower_volume = 15
+ooze_shield = False
+filament_diameter = 2.85
+filament_diameter2 = 0
+filament_diameter3 = 0
+filament_diameter4 = 0
+filament_diameter5 = 0
+filament_flow = 100.0
+retraction_speed = 10
+retraction_amount = 1.5
+retraction_dual_amount = 16.5
+retraction_min_travel = 1.5
+retraction_combing = All
+retraction_minimal_extrusion = 0.005
+retraction_hop = 0.1
+bottom_thickness = 0.425
+layer0_width_factor = 125
+object_sink = 0.0
+overlap_dual = 0.15
+travel_speed = 175
+bottom_layer_speed = 10
+infill_speed = 40
+solidarea_speed = 30
+inset0_speed = 30
+insetx_speed = 35
+cool_min_layer_time = 5
+fan_enabled = True
+skirt_line_count = 1
+skirt_gap = 3.0
+skirt_minimal_length = 250
+fan_full_height = 0.5
+fan_speed = 100
+fan_speed_max = 100
+cool_min_feedrate = 10
+cool_head_lift = False
+solid_top = True
+solid_bottom = True
+fill_overlap = 15
+support_type = Lines
+support_angle = 45
+support_fill_rate = 30
+support_xy_distance = 0.7
+support_z_distance = 0.05
+spiralize = False
+simple_mode = False
+brim_line_count = 10
+raft_margin = 5.0
+raft_line_spacing = 3.0
+raft_base_thickness = 0.3
+raft_base_linewidth = 1.0
+raft_interface_thickness = 0.27
+raft_interface_linewidth = 0.4
+raft_airgap_all = 0.0
+raft_airgap = 0.5
+raft_surface_layers = 2
+raft_surface_thickness = 0.27
+raft_surface_linewidth = 0.4
+fix_horrible_union_all_type_a = True
+fix_horrible_union_all_type_b = False
+fix_horrible_use_open_bits = False
+fix_horrible_extensive_stitching = False
+plugin_config =
+object_center_x = -1
+object_center_y = -1
+simplemodesettings =
+simplemodeprofile = 2_normal
+simplemodematerial = 1_pla
+simplemodematerialtype = Beginner
+
+[alterations]
+start.gcode = ;Sliced at: {day} {date} {time}
+ ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+ ;Print time: {print_time}
+ ;Filament used: {filament_amount}m {filament_weight}g
+ ;Filament cost: {filament_cost}
+ ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+ ;M109 S{print_temperature} ;Uncomment to add your own temperature line
+ G21 ;metric values
+ G90 ;absolute positioning
+ M82 ;set extruder to absolute mode
+ M107 ;start with the fan off
+ G28 X0 Y0 ;move X/Y to min endstops
+ G28 Z0 ;move Z to min endstops
+ G1 Z15.0 F{travel_speed};move the platform down 15mm
+ G92 E0 ; zero the extruded length
+ G1 F200 E0 ; extrude 3mm of feed stock
+ G92 E0 ; zero the extruded length again
+ G1 F{travel_speed} ; set travel speed
+ M203 X192 Y208 Z3 ; speed limits
+ M117 Printing... ; send message to LCD
+end.gcode = M400
+ M104 S0 ; hotend off
+ M140 S0 ; heated bed heater off (if you have it)
+ M107 ; fans off
+ G91 ; relative positioning
+ G1 E-1 F300 ; retract the filament a bit before lifting the nozzle, to release some of the pressure
+ G1 Z+0.5 E-5 X-20 Y-20 F3000 ; move Z up a bit and retract filament even more
+ G90 ; absolute positioning
+ G1 X0 Y250 ; move to cooling position
+ M84 ; steppers off
+ G90 ; absolute positioning
+ M117 TAZ Ready.
+ ;{profile_string}
+start2.gcode = ;Sliced at: {day} {date} {time}
+ ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+ ;Print time: {print_time}
+ ;Filament used: {filament_amount}m {filament_weight}g
+ ;Filament cost: {filament_cost}
+ ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+ ;M104 S{print_temperature} ;Uncomment to add your own temperature line
+ ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+ ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+ G21 ;metric values
+ G90 ;absolute positioning
+ M107 ;start with the fan off
+ G28 X0 Y0 ;move X/Y to min endstops
+ G28 Z0 ;move Z to min endstops
+ G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+ T1 ;Switch to the 2nd extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T0 ;Switch to the first extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F{travel_speed}
+ ;Put printing message on LCD screen
+ M117 Printing...
+end2.gcode = ;End GCode
+ M104 T0 S0 ;extruder heater off
+ M104 T1 S0 ;extruder heater off
+ M140 S0 ;heated bed heater off (if you have it)
+ G91 ;relative positioning
+ G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+ G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+ G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way
+ M84 ;steppers off
+ G90 ;absolute positioning
+ ;{profile_string}
+start3.gcode = ;Sliced at: {day} {date} {time}
+ ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+ ;Print time: {print_time}
+ ;Filament used: {filament_amount}m {filament_weight}g
+ ;Filament cost: {filament_cost}
+ ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+ ;M104 S{print_temperature} ;Uncomment to add your own temperature line
+ ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+ ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+ G21 ;metric values
+ G90 ;absolute positioning
+ M107 ;start with the fan off
+ G28 X0 Y0 ;move X/Y to min endstops
+ G28 Z0 ;move Z to min endstops
+ G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+ T2 ;Switch to the 2nd extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T1 ;Switch to the 2nd extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T0 ;Switch to the first extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F{travel_speed}
+ ;Put printing message on LCD screen
+ M117 Printing...
+end3.gcode = ;End GCode
+ M104 T0 S0 ;extruder heater off
+ M104 T1 S0 ;extruder heater off
+ M104 T2 S0 ;extruder heater off
+ M140 S0 ;heated bed heater off (if you have it)
+ G91 ;relative positioning
+ G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+ G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+ G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way
+ M84 ;steppers off
+ G90 ;absolute positioning
+ ;{profile_string}
+start4.gcode = ;Sliced at: {day} {date} {time}
+ ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+ ;Print time: {print_time}
+ ;Filament used: {filament_amount}m {filament_weight}g
+ ;Filament cost: {filament_cost}
+ ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+ ;M104 S{print_temperature} ;Uncomment to add your own temperature line
+ ;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line
+ ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+ ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+ G21 ;metric values
+ G90 ;absolute positioning
+ M107 ;start with the fan off
+ G28 X0 Y0 ;move X/Y to min endstops
+ G28 Z0 ;move Z to min endstops
+ G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+ T3 ;Switch to the 4th extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T2 ;Switch to the 3th extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T1 ;Switch to the 2nd extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T0 ;Switch to the first extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F{travel_speed}
+ ;Put printing message on LCD screen
+ M117 Printing...
+end4.gcode = ;End GCode
+ M104 T0 S0 ;extruder heater off
+ M104 T1 S0 ;extruder heater off
+ M104 T2 S0 ;extruder heater off
+ M104 T3 S0 ;extruder heater off
+ M140 S0 ;heated bed heater off (if you have it)
+ G91 ;relative positioning
+ G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+ G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+ G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way
+ M84 ;steppers off
+ G90 ;absolute positioning
+ ;{profile_string}
+support_start.gcode =
+support_end.gcode =
+cool_start.gcode =
+cool_end.gcode =
+replace.csv =
+preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+ ;This code is added before the T(n)
+postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+ ;This code is added after the T(n)
+
--- /dev/null
+[profile]
+layer_height = 0.38
+wall_thickness = 1
+retraction_enable = True
+solid_layer_thickness = 1
+fill_density = 20
+perimeter_before_infill = True
+nozzle_size = 0.5
+print_speed = 50
+print_temperature = 0
+print_temperature2 = 0
+print_temperature3 = 0
+print_temperature4 = 0
+print_temperature5 = 0
+print_bed_temperature = 0
+support = None
+platform_adhesion = None
+support_dual_extrusion = Both
+wipe_tower = False
+wipe_tower_volume = 15
+ooze_shield = False
+filament_diameter = 2.85
+filament_diameter2 = 0
+filament_diameter3 = 0
+filament_diameter4 = 0
+filament_diameter5 = 0
+filament_flow = 100.0
+retraction_speed = 10
+retraction_amount = 1.5
+retraction_dual_amount = 16.5
+retraction_min_travel = 1.5
+retraction_combing = All
+retraction_minimal_extrusion = 0.005
+retraction_hop = 0.1
+bottom_thickness = 0.425
+layer0_width_factor = 125
+object_sink = 0.0
+overlap_dual = 0.15
+travel_speed = 175
+bottom_layer_speed = 15
+infill_speed = 50
+solidarea_speed = 40
+inset0_speed = 40
+insetx_speed = 45
+cool_min_layer_time = 5
+fan_enabled = True
+skirt_line_count = 1
+skirt_gap = 3.0
+skirt_minimal_length = 250
+fan_full_height = 0.5
+fan_speed = 100
+fan_speed_max = 100
+cool_min_feedrate = 10
+cool_head_lift = False
+solid_top = True
+solid_bottom = True
+fill_overlap = 15
+support_type = Lines
+support_angle = 45
+support_fill_rate = 30
+support_xy_distance = 0.7
+support_z_distance = 0.05
+spiralize = False
+simple_mode = False
+brim_line_count = 10
+raft_margin = 5.0
+raft_line_spacing = 3.0
+raft_base_thickness = 0.3
+raft_base_linewidth = 1.0
+raft_interface_thickness = 0.27
+raft_interface_linewidth = 0.4
+raft_airgap_all = 0.0
+raft_airgap = 0.5
+raft_surface_layers = 2
+raft_surface_thickness = 0.27
+raft_surface_linewidth = 0.4
+fix_horrible_union_all_type_a = True
+fix_horrible_union_all_type_b = False
+fix_horrible_use_open_bits = False
+fix_horrible_extensive_stitching = False
+plugin_config =
+object_center_x = -1
+object_center_y = -1
+simplemodesettings =
+simplemodeprofile = 2_normal
+simplemodematerial = 1_pla
+simplemodematerialtype = Beginner
+
+[alterations]
+start.gcode = ;Sliced at: {day} {date} {time}
+ ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+ ;Print time: {print_time}
+ ;Filament used: {filament_amount}m {filament_weight}g
+ ;Filament cost: {filament_cost}
+ ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+ ;M109 S{print_temperature} ;Uncomment to add your own temperature line
+ G21 ;metric values
+ G90 ;absolute positioning
+ M82 ;set extruder to absolute mode
+ M107 ;start with the fan off
+ G28 X0 Y0 ;move X/Y to min endstops
+ G28 Z0 ;move Z to min endstops
+ G1 Z15.0 F{travel_speed};move the platform down 15mm
+ G92 E0 ; zero the extruded length
+ G1 F200 E0 ; extrude 3mm of feed stock
+ G92 E0 ; zero the extruded length again
+ G1 F{travel_speed} ; set travel speed
+ M203 X192 Y208 Z3 ; speed limits
+ M117 Printing... ; send message to LCD
+end.gcode = M400
+ M104 S0 ; hotend off
+ M140 S0 ; heated bed heater off (if you have it)
+ M107 ; fans off
+ G91 ; relative positioning
+ G1 E-1 F300 ; retract the filament a bit before lifting the nozzle, to release some of the pressure
+ G1 Z+0.5 E-5 X-20 Y-20 F3000 ; move Z up a bit and retract filament even more
+ G90 ; absolute positioning
+ G1 X0 Y250 ; move to cooling position
+ M84 ; steppers off
+ G90 ; absolute positioning
+ M117 TAZ Ready.
+ ;{profile_string}
+start2.gcode = ;Sliced at: {day} {date} {time}
+ ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+ ;Print time: {print_time}
+ ;Filament used: {filament_amount}m {filament_weight}g
+ ;Filament cost: {filament_cost}
+ ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+ ;M104 S{print_temperature} ;Uncomment to add your own temperature line
+ ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+ ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+ G21 ;metric values
+ G90 ;absolute positioning
+ M107 ;start with the fan off
+ G28 X0 Y0 ;move X/Y to min endstops
+ G28 Z0 ;move Z to min endstops
+ G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+ T1 ;Switch to the 2nd extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T0 ;Switch to the first extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F{travel_speed}
+ ;Put printing message on LCD screen
+ M117 Printing...
+end2.gcode = ;End GCode
+ M104 T0 S0 ;extruder heater off
+ M104 T1 S0 ;extruder heater off
+ M140 S0 ;heated bed heater off (if you have it)
+ G91 ;relative positioning
+ G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+ G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+ G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way
+ M84 ;steppers off
+ G90 ;absolute positioning
+ ;{profile_string}
+start3.gcode = ;Sliced at: {day} {date} {time}
+ ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+ ;Print time: {print_time}
+ ;Filament used: {filament_amount}m {filament_weight}g
+ ;Filament cost: {filament_cost}
+ ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+ ;M104 S{print_temperature} ;Uncomment to add your own temperature line
+ ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+ ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+ G21 ;metric values
+ G90 ;absolute positioning
+ M107 ;start with the fan off
+ G28 X0 Y0 ;move X/Y to min endstops
+ G28 Z0 ;move Z to min endstops
+ G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+ T2 ;Switch to the 2nd extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T1 ;Switch to the 2nd extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T0 ;Switch to the first extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F{travel_speed}
+ ;Put printing message on LCD screen
+ M117 Printing...
+end3.gcode = ;End GCode
+ M104 T0 S0 ;extruder heater off
+ M104 T1 S0 ;extruder heater off
+ M104 T2 S0 ;extruder heater off
+ M140 S0 ;heated bed heater off (if you have it)
+ G91 ;relative positioning
+ G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+ G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+ G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way
+ M84 ;steppers off
+ G90 ;absolute positioning
+ ;{profile_string}
+start4.gcode = ;Sliced at: {day} {date} {time}
+ ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+ ;Print time: {print_time}
+ ;Filament used: {filament_amount}m {filament_weight}g
+ ;Filament cost: {filament_cost}
+ ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+ ;M104 S{print_temperature} ;Uncomment to add your own temperature line
+ ;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line
+ ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+ ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+ G21 ;metric values
+ G90 ;absolute positioning
+ M107 ;start with the fan off
+ G28 X0 Y0 ;move X/Y to min endstops
+ G28 Z0 ;move Z to min endstops
+ G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+ T3 ;Switch to the 4th extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T2 ;Switch to the 3th extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T1 ;Switch to the 2nd extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F200 E-{retraction_dual_amount}
+ T0 ;Switch to the first extruder
+ G92 E0 ;zero the extruded length
+ G1 F200 E10 ;extrude 10mm of feed stock
+ G92 E0 ;zero the extruded length again
+ G1 F{travel_speed}
+ ;Put printing message on LCD screen
+ M117 Printing...
+end4.gcode = ;End GCode
+ M104 T0 S0 ;extruder heater off
+ M104 T1 S0 ;extruder heater off
+ M104 T2 S0 ;extruder heater off
+ M104 T3 S0 ;extruder heater off
+ M140 S0 ;heated bed heater off (if you have it)
+ G91 ;relative positioning
+ G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+ G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+ G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way
+ M84 ;steppers off
+ G90 ;absolute positioning
+ ;{profile_string}
+support_start.gcode =
+support_end.gcode =
+cool_start.gcode =
+cool_end.gcode =
+replace.csv =
+preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+ ;This code is added before the T(n)
+postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+ ;This code is added after the T(n)
+
"Laywood": "laywood",
"n-vent": "n-vent",
"XT": "XT",
+ "INOVA-1800": "CS-INOVA-1800",
"PCTPE": "PCTPE",
"PC-ABS": "PC-ABS",
"T-Glase": "t-glase",
"Laywood": 52,
"n-vent": 53,
"XT": 54,
- "PCTPE": 55,
- "PC-ABS": 56,
- "T-Glase": 57,
- "Bronzefill":58,
- "Copperfill":59,
+ "INOVA-1800": 55,
+ "PCTPE": 56,
+ "PC-ABS": 57,
+ "T-Glase": 58,
+ "Bronzefill":59,
+ "Copperfill":60,
# Expert
"PP-Conductive": 500,
"HIPS_VP" : 501,
"Laywood": "Advanced",
"n-vent": "Advanced",
"XT": "Advanced",
+ "INOVA-1800": "Advanced",
"PCTPE": "Advanced",
"PC-ABS": "Advanced",
"T-Glase": "Advanced",
"Laywood": "Laywoo-D3 (CC-Products)",
"n-vent": "n-vent (Taulman)",
"XT": "XT (Colorfabb)",
+ "INOVA-1800": "INOVA-1800 (ChromaStrand)",
"PCTPE": "PCTPE (Taulman)",
"PC-ABS": "PC-ABS (Proto-pasta)",
"T-Glase": "t-glase (Taulman)",
"Bridge",
"n-vent",
"XT",
+ "INOVA-1800",
"PCTPE",
"T-Glase",
"618-Nylon",
"Laywood": "www.lulzbot.com/products/laywoo-d3-cherry-laywood-3mm-250g-coil-cc-products",
"n-vent": "www.lulzbot.com/products/n-vent-3mm-filament-1lb-taulman",
# "XT": "",
+# "INOVA-1800": "",
"PCTPE": "www.lulzbot.com/products/taulman-pctpe-3mm-filament-1-pound",
"PC-ABS": "www.lulzbot.com/products/pc-abs-alloy-3mm-filament-500g-reel-proto-pasta",
"T-Glase": "www.lulzbot.com/products/t-glase-3mm-filament-1lb-reel",
~ianmdlvl / cura.git / commitdiff