Update to Mini quick print settings.

Close #49

diff --git a/Cura/gui/simpleMode.py b/Cura/gui/simpleMode.py
index 9a1c8e23f5295afbf8fc8b63b02d85eb2e2af644..ff0e939a20b5d974e6dd6200491ab8843c408615 100644 (file)
--- a/Cura/gui/simpleMode.py
+++ b/Cura/gui/simpleMode.py
@@ -95,16 +95,17 @@ class simpleModePanel(wx.Panel):
 # LulzBot Mini slice settings for use with the simple slice selection.
                if profile.getMachineSetting('machine_type') == 'lulzbot_mini':
                        put('wall_thickness', '1')
-                       put('fill_density', '30')
+                       put('fill_density', '20')
                        put('print_temperature', '0')
                        put('print_bed_temperature', '0')
-                       put('retraction_speed', '25')
+                       put('retraction_amount', '1.5')
                        put('retraction_hop', '0.1')
                        put('bottom_thickness', '0.425')
                        put('layer0_width_factor', '125')
                        put('travel_speed', '175')
-                       put('cool_min_layer_time', '15')
+                       put('bottom_layer_speed', '25')
                        put('skirt_minimal_length', '250')
+                       put('cool_min_feedrate', '10')
                        put('brim_line_count', '10')
                        put('raft_airgap', '0.5')
                        if self.printSupport.GetValue():
@@ -118,7 +119,8 @@ class simpleModePanel(wx.Panel):
                                put('platform_adhesion', 'Brim')
                        if self.printMaterialHIPS.GetValue() or self.printMaterialABS.GetValue():
                                put('solid_layer_thickness', '0.8')
-                               put('retraction_amount', '1.5')
+                               put('retraction_speed', '25')
+                               put('cool_min_layer_time', '15')
                                put('start.gcode', """;This Gcode has been generated specifically for the LulzBot Mini
 ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
 ;Print time: {print_time}
@@ -191,11 +193,9 @@ G90                             ; absolute positioning
 ;{profile_string}
 """)
                                if self.printMaterialHIPS.GetValue():
-                                       put('bottom_layer_speed', '30')
                                        put('fan_full_height', '2')
-                                       put('fan_speed', '45')
-                                       put('fan_speed_max', '75')
-                                       put('cool_min_feedrate', '45')
+                                       put('fan_speed', '60')
+                                       put('fan_speed_max', '80')
                                        put('plugin_config', """(lp1
        (dp2
        S'params'
@@ -203,7 +203,7 @@ G90                             ; absolute positioning
        (dp4
        S'targetL'
        p5
-       V
+       V3
        sS'extruderTwo'
        p6
        V
@@ -212,7 +212,7 @@ G90                             ; absolute positioning
        V
        sS'targetZ'
        p8
-       V2
+       V
        sS'flowrate'
        p9
        V
@@ -245,10 +245,10 @@ G90                             ; absolute positioning
                                                put('insetx_speed', '80')
                                        if self.printTypeNormal.GetValue():
                                                put('layer_height', '0.25')
-                                               put('print_speed', '65')
-                                               put('infill_speed', '85')
-                                               put('inset0_speed', '45')
-                                               put('insetx_speed', '50')
+                                               put('print_speed', '50')
+                                               put('infill_speed', '70')
+                                               put('inset0_speed', '40')
+                                               put('insetx_speed', '45')
                                        if self.printTypeHigh.GetValue():
                                                put('layer_height', '0.14')
                                                put('print_speed', '30')
@@ -258,41 +258,35 @@ G90                             ; absolute positioning
                                if self.printMaterialABS.GetValue():
                                        put('fan_full_height', '5')
                                        put('fan_speed', '40')
-                                       put('fan_speed_max', '75')
-                                       put('cool_min_feedrate', '10')
+                                       put('fan_speed_max', '60')
                                        if self.printTypeLow.GetValue():
                                                put('layer_height', '0.38')
                                                put('print_speed', '85')
-                                               put('bottom_layer_speed', '30')
                                                put('infill_speed', '110')
                                                put('inset0_speed', '70')
                                                put('insetx_speed', '80')
                                        if self.printTypeNormal.GetValue():
                                                put('layer_height', '0.25')
                                                put('print_speed', '50')
-                                               put('bottom_layer_speed', '25')
                                                put('infill_speed', '55')
                                                put('inset0_speed', '45')
                                                put('insetx_speed', '50')
                                        if self.printTypeHigh.GetValue():
                                                put('layer_height', '0.14')
                                                put('print_speed', '50')
-                                               put('bottom_layer_speed', '25')
                                                put('infill_speed', '55')
                                                put('inset0_speed', '45')
                                                put('insetx_speed', '50')
                        elif self.printMaterialPLA.GetValue():
                                put('solid_layer_thickness', '1')
-                               put('retraction_amount', '3')
-                               put('bottom_layer_speed', '25')
+                               put('retraction_speed', '10')
                                put('infill_speed', '55')
                                put('inset0_speed', '45')
                                put('insetx_speed', '50')
+                               put('cool_min_layer_time', '20')
                                put('fan_full_height', '1')
-                               put('fan_speed', '75')
+                               put('fan_speed', '100')
                                put('fan_speed_max', '100')
-                               put('cool_min_feedrate', '15')
-                               put('print_speed', '50')
                                put('start.gcode', """;This Gcode has been generated specifically for the LulzBot Mini
 ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
 ;Print time: {print_time}
@@ -348,7 +342,7 @@ M400                         ; clear buffer
 M109 S195                    ; set extruder temp and wait
 G4 S15                       ; wait for bed to temp up
 G1 Z2 E0 F75                 ; extrude filament back into nozzle
-M140 S75                     ; get bed temping up during first layer
+M140 S65                     ; get bed temping up during first layer
 """)
                                put('end.gcode', """
 M400