Remove support margin setting, it is not really needed to configure this.

diff --git a/Cura/cura_sf/fabmetheus_utilities/settings.py b/Cura/cura_sf/fabmetheus_utilities/settings.py
index b3f1713580dff8d7919923b018edef13f38f803e..82f8ee9ac0fb3af828852ea65df0f8c94846ce06 100644 (file)
--- a/Cura/cura_sf/fabmetheus_utilities/settings.py
+++ b/Cura/cura_sf/fabmetheus_utilities/settings.py
@@ -240,7 +240,7 @@ def getProfileInformation():
                        'Support_Gap_over_Perimeter_Extrusion_Width_ratio': calcSupportDistanceRatio,
                        'Support_Material_Choice_': storedSetting('support'),
                        'Support_Minimum_Angle_degrees': DEFSET,
-                       'Support_Margin_mm': storedSettingFloat('support_margin'),
+                       'Support_Margin_mm': '3.0',
                },'skirt': {
                        'Skirt_line_count': storedSetting("skirt_line_count"),
                        'Convex': "True",

diff --git a/Cura/gui/expertConfig.py b/Cura/gui/expertConfig.py
index 201490204abd0aa6f72dfab935b56a44dfcfe950..933bd8e2b09264a6e9356da047e1eac562ac2872 100644 (file)
--- a/Cura/gui/expertConfig.py
+++ b/Cura/gui/expertConfig.py
@@ -44,8 +44,6 @@ class expertConfigWindow(configBase.configWindowBase):
                validators.validFloat(c, 0.0)
                c = configBase.SettingRow(left, "Distance from object (mm)", 'support_distance', '0.5', 'Distance between the support structure and the object. Empty gap in which no support structure is printed.')
                validators.validFloat(c, 0.0)
-               c = configBase.SettingRow(left, "Extra margin (mm)", 'support_margin', '3.0', 'Extra margin which is used to extend the support lines outwards. A margin of 0 generates support structure only directly underneath the model.')
-               validators.validFloat(c, 0.0)
 
                configBase.TitleRow(right, "Infill")
                c = configBase.SettingRow(right, "Infill pattern", 'infill_type', ['Line', 'Grid Circular', 'Grid Hexagonal', 'Grid Rectangular'], 'Pattern of the none-solid infill. Line is default, but grids can provide a strong print.')

diff --git a/Cura/util/profile.py b/Cura/util/profile.py
index 67b31c95bb5e2d4a513e21ad9d006db470e9442d..a6aa6d6841c3d1142af674567ce8ca4665d40dd8 100644 (file)
--- a/Cura/util/profile.py
+++ b/Cura/util/profile.py
@@ -53,7 +53,6 @@ profileDefaultSettings = {
        'fill_overlap': '15',\r
        'support_rate': '50',\r
        'support_distance': '0.5',\r
-       'support_margin': '3.0',\r
        'joris': 'False',\r
        'enable_skin': 'False',\r
        'enable_raft': 'False',\r