poster-tube-lid: Rename StrapLoop from StrapHoop

Hoop sounds like the whole thing.

Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>

diff --git a/poster-tube-lid.scad b/poster-tube-lid.scad
index e7c8852d922e0da0cbb4c184a33dce9878994e08..220757555bcc2089c0e94b4e2563ccaf515b466f 100644 (file)
--- a/poster-tube-lid.scad
+++ b/poster-tube-lid.scad
@@ -63,10 +63,10 @@ jig_hole_dia = 3.0;
 jig_rim = 5;
 jig_mark = 5;
 
-strap_hoop_thick = 6;
-strap_hoop_inside = 10;
-strap_hoop_strlen = 10;
-strap_hoop_elevation = 45;
+strap_loop_thick = 6;
+strap_loop_inside = 10;
+strap_loop_strlen = 10;
+strap_loop_elevation = 45;
 
 sm_inner_circum = 218 - 1.90 - 1.00 - 0.50;
 sm_main_thick = 2.0;
@@ -297,28 +297,28 @@ module MainProfile(){
   }
 }
 
-module StrapHoopProfile(){
-  circle(r = strap_hoop_thick/2);
+module StrapLoopProfile(){
+  circle(r = strap_loop_thick/2);
 }
 
-module StrapHoop(){ ////toplevel
-  bigrad = strap_hoop_inside/2 + strap_hoop_thick/2;
-  extralen = strap_hoop_thick * 5;
+module StrapLoop(){ ////toplevel
+  bigrad = strap_loop_inside/2 + strap_loop_thick/2;
+  extralen = strap_loop_thick * 5;
 
   intersection(){
-    rotate([strap_hoop_elevation, 0,0]){
+    rotate([strap_loop_elevation, 0,0]){
       for (x= [ -1, +1 ] * bigrad) {
        translate([x, -extralen, 0])
          rotate([-90,0,0])
-         linear_extrude(height= extralen + strap_hoop_strlen + 0.1,
+         linear_extrude(height= extralen + strap_loop_strlen + 0.1,
                         convexity=10)
-         StrapHoopProfile();
+         StrapLoopProfile();
       }
-      translate([0, strap_hoop_strlen, 0]){
+      translate([0, strap_loop_strlen, 0]){
        intersection(){
          rotate_extrude(convexity=10)
            translate([bigrad, 0,0])
-           StrapHoopProfile();
+           StrapLoopProfile();
          translate([0,50,0])
            cube([100,100,100], center=true);
        }
@@ -438,10 +438,10 @@ module Cover(){ ////toplevel
                   middle_bot_z + 0.1])
        ImplHeadCup();
 
-//  translate(strap_hoop_thick * [-0.5, 0, +1])
+//  translate(strap_loop_thick * [-0.5, 0, +1])
 //    translate([handling_dia/2, 0, -side_height])
 //    rotate([0,180,0]) rotate([0,0,90])
-//    StrapHoop();
+//    StrapLoop();
 }
 
 module SavingHole(){
@@ -492,7 +492,7 @@ module CoverTest1(){ ////toplevel
       }
 //      translate([ 50, 0, 0 ])
 //     cube([ 100,
-//            strap_hoop_inside + strap_hoop_thick*2 + 1,
+//            strap_loop_inside + strap_loop_thick*2 + 1,
 //            100 ],
 //          center=true);
     }
@@ -563,14 +563,14 @@ module StrapMountProtrusion(half_x, max_y, cnr, width){
 module StrapMount(){ ////toplevel
   SomeStrap(sm_main_width){
     rotate([0,0,180]){
-      StrapMountProtrusion(strap_hoop_inside/2 + strap_hoop_thick,
-                          strap_hoop_thick,
+      StrapMountProtrusion(strap_loop_inside/2 + strap_loop_thick,
+                          strap_loop_thick,
                           sm_closure_cnr,
                           sm_main_width);
       translate(smc_pos +
                [0,0, sm_main_width] +
-               strap_hoop_thick * [ 0, 0.5, -1.0 ])
-       StrapHoop();
+               strap_loop_thick * [ 0, 0.5, -1.0 ])
+       StrapLoop();
     }
     union(){ };
   }