setting('solid_layer_thickness', 0.6, float, 'basic', 'Fill').setRange(0).setLabel('Bottom/Top thickness (mm)', 'This controls the thickness of the bottom and top layers, the amount of solid layers put down is calculated by the layer thickness and this value.\nHaving this value a multiply of the layer thickness makes sense. And keep it near your wall thickness to make an evenly strong part.')
setting('fill_density', 20, float, 'basic', 'Fill').setRange(0, 100).setLabel('Fill Density (%)', 'This controls how densely filled the insides of your print will be. For a solid part use 100%, for an empty part use 0%. A value around 20% is usually enough.\nThis won\'t effect the outside of the print and only adjusts how strong the part becomes.')
setting('nozzle_size', 0.4, float, 'advanced', 'Machine').setRange(0.1,10).setLabel('Nozzle size (mm)', 'The nozzle size is very important, this is used to calculate the line width of the infill, and used to calculate the amount of outside wall lines and thickness for the wall thickness you entered in the print settings.')
-setting('skirt_line_count', 1, int, 'advanced', 'Skirt').setRange(0).setLabel('Line count', 'The skirt is a line drawn around the object at the first layer. This helps to prime your extruder, and to see if the object fits on your platform.\nSetting this to 0 will disable the skirt. Multiple skirt lines can help priming your extruder better for small objects.')
-setting('skirt_gap', 3.0, float, 'advanced', 'Skirt').setRange(0).setLabel('Start distance (mm)', 'The distance between the skirt and the first layer.\nThis is the minimal distance, multiple skirt lines will be put outwards from this distance.')
setting('print_speed', 50, float, 'basic', 'Speed & Temperature').setRange(1).setLabel('Print speed (mm/s)', 'Speed at which printing happens. A well adjusted Ultimaker can reach 150mm/s, but for good quality prints you want to print slower. Printing speed depends on a lot of factors. So you will be experimenting with optimal settings for this.')
setting('print_temperature', 220, int, 'basic', 'Speed & Temperature').setRange(0,340).setLabel('Printing temperature (C)', 'Temperature used for printing. Set at 0 to pre-heat yourself.\nFor PLA a value of 210C is usually used.\nFor ABS a value of 230C or higher is required.')
setting('print_temperature2', 0, int, 'basic', 'Speed & Temperature').setRange(0,340).setLabel('2nd nozzle temperature (C)', 'Temperature used for printing. Set at 0 to pre-heat yourself.\nFor PLA a value of 210C is usually used.\nFor ABS a value of 230C or higher is required.')
setting('cool_min_layer_time', 5, float, 'advanced', 'Cool').setRange(0).setLabel('Minimal layer time (sec)', 'Minimum time spend in a layer, gives the layer time to cool down before the next layer is put on top. If the layer will be placed down too fast the printer will slow down to make sure it has spend at least this amount of seconds printing this layer.')
setting('fan_enabled', True, bool, 'advanced', 'Cool').setLabel('Enable cooling fan', 'Enable the cooling fan during the print. The extra cooling from the cooling fan is essential during faster prints.')
+setting('skirt_line_count', 1, int, 'expert', 'Skirt').setRange(0).setLabel('Line count', 'The skirt is a line drawn around the object at the first layer. This helps to prime your extruder, and to see if the object fits on your platform.\nSetting this to 0 will disable the skirt. Multiple skirt lines can help priming your extruder better for small objects.')
+setting('skirt_gap', 3.0, float, 'expert', 'Skirt').setRange(0).setLabel('Start distance (mm)', 'The distance between the skirt and the first layer.\nThis is the minimal distance, multiple skirt lines will be put outwards from this distance.')
#setting('max_z_speed', 3.0, float, 'expert', 'Speed').setRange(0.1).setLabel('Max Z speed (mm/s)', 'Speed at which Z moves are done. When you Z axis is properly lubricated you can increase this for less Z blob.')
#setting('retract_on_jumps_only', True, bool, 'expert', 'Retraction').setLabel('Retract on jumps only', 'Only retract when we are making a move that is over a hole in the model, else retract on every move. This effects print quality in different ways.')
setting('fan_layer', 1, int, 'expert', 'Cool').setRange(0).setLabel('Fan on layer number', 'The layer at which the fan is turned on. The first layer is layer 0. The first layer can stick better if you turn on the fan on, on the 2nd layer.')
#setting('support_distance', 0.5, float, 'expert', 'Support').setRange(0).setLabel('Distance from object (mm)', 'Distance between the support structure and the object. Empty gap in which no support structure is printed.')
#setting('joris', False, bool, 'expert', 'Joris').setLabel('Spiralize the outer contour', '[Joris] is a code name for smoothing out the Z move of the outer edge. This will create a steady Z increase over the whole print. It is intended to be used with a single walled wall thickness to make cups/vases.')
#setting('bridge_speed', 100, int, 'expert', 'Bridge').setRange(0,100).setLabel('Bridge speed (%)', 'Speed at which layers with bridges are printed, compared to normal printing speed.')
+setting('brim_line_count', 20, int, 'expert', 'Brim').setRange(1,100).setLabel('Brim line amount', 'The amount of lines used for a brim, more lines means a larger brim which sticks better, but this also makes your effective print area smaller.')
setting('raft_margin', 5, float, 'expert', 'Raft').setRange(0).setLabel('Extra margin (mm)', 'If the raft is enabled, this is the extra raft area around the object which is also rafted. Increasing this margin will create a stronger raft while using more material and leaving less are for your print.')
setting('raft_line_spacing', 1.0, float, 'expert', 'Raft').setRange(0).setLabel('Line spacing (mm)', 'When you are using the raft this is the distance between the centerlines of the raft line.')
setting('raft_base_thickness', 0.3, float, 'expert', 'Raft').setRange(0).setLabel('Base thickness (mm)', 'When you are using the raft this is the thickness of the base layer which is put down.')
setting('raft_base_linewidth', 0.7, float, 'expert', 'Raft').setRange(0).setLabel('Base line width (mm)', 'When you are using the raft this is the width of the base layer lines which are put down.')
setting('raft_interface_thickness', 0.2, float, 'expert', 'Raft').setRange(0).setLabel('Interface thickness (mm)', 'When you are using the raft this is the thickness of the interface layer which is put down.')
setting('raft_interface_linewidth', 0.2, float, 'expert', 'Raft').setRange(0).setLabel('Interface line width (mm)', 'When you are using the raft this is the width of the interface layer lines which are put down.')
-setting('brim_line_count', 20, int, 'expert', 'Brim').setRange(1,100).setLabel('Brim line amount', 'The amount of lines used for a brim, more lines means a larger brim which sticks better, but this also makes your effective print area smaller.')
#setting('hop_on_move', False, bool, 'expert', 'Hop').setLabel('Enable hop on move', 'When moving from print position to print position, raise the printer head 0.2mm so it does not knock off the print (experimental).')
setting('plugin_config', '', str, 'hidden', 'hidden')
~ianmdlvl / cura.git / commitdiff