+++ /dev/null
- G21 ;metric values)
-G21 ;metric values
--G90 ;absolute positioning
--G21
--G28 X0 Y0 ;move X/Y to min endstops
--G28 Z0 ;move Z to min endstops
--
--; if your prints start too high, try changing the Z0.0 below
--; to Z1.0 - the number after the Z is the actual, physical
--; height of the nozzle in mm. This can take some messing around
- ; with to get just right...
- G21
-; with to get just right...
--G92 X0 Y0 Z0 E0 ;reset software position to front/left/z=0.0
--G21
--G1 Z15.0 F400 ;move the platform down 15mm
--G92 E0 ;zero the extruded length
--G21
- G1 F75 E5 ;extrude 5mm of feed stock
- G1 F75 E3.5 ;reverse feed stock by 1.5mm
-G1 F75 E5 ;extrude 5mm of feed stock
-G1 F75 E3.5 ;reverse feed stock by 1.5mm
--G92 E0 ;zero the extruded length again
--G21
--M1 ;Clean the nozzle then press YES to continue...
--G21
--G1 X100 Y100 F3500 ;go to the middle of the platform
--G1 Z0.0 F400 ;back to Z=0 and start the print!
--