Removing brim settings from Mini simpleMode settings.

Close #34

diff --git a/Cura/gui/simpleMode.py b/Cura/gui/simpleMode.py
index d21d3a3ec713e3e71c29b79ca796d1b2ef8f439a..0dceff4ac42c66d2f4671f3a7d15e8f63f2f65cf 100644 (file)
--- a/Cura/gui/simpleMode.py
+++ b/Cura/gui/simpleMode.py
@@ -183,7 +183,6 @@ class simpleModePanel(wx.Panel):
                                        put('fan_full_height', '2')
                                        put('fan_speed', '45')
                                        put('cool_min_feedrate', '45')
-                                       put('brim_line_count', '10')
                                        put('raft_airgap', '0.5')
                                        put('plugin_config', """(lp1
        (dp2
@@ -257,7 +256,6 @@ class simpleModePanel(wx.Panel):
                                                put('infill_speed', '110')
                                                put('inset0_speed', '70')
                                                put('insetx_speed', '80')
-                                               put('brim_line_count', '8')
                                        if self.printTypeNormal.GetValue():
                                                put('layer_height', '0.25')
                                                put('print_speed', '75')
@@ -283,7 +281,6 @@ class simpleModePanel(wx.Panel):
                                put('fan_speed', '75')
                                put('fan_speed_max', '100')
                                put('cool_min_feedrate', '15')
-                               put('brim_line_count', '2')
                                put('start.gcode', """;LulzBot Mini
        ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
        ;Print time: {print_time}
@@ -437,7 +434,6 @@ end.gcode = M104 S0
                                                put('fan_full_height', '1')
                                                put('fan_speed', '25')
                                                put('fan_speed_max', '30')
-                                               put('brim_line_count', '8')
                                        if self.printTypeNormal.GetValue():
                                                put('layer_height', '0.21')
                                                put('wall_thickness', '1.05')
@@ -478,7 +474,6 @@ end.gcode = M104 S0
                                                put('fan_full_height', '5')
                                                put('fan_speed', '25')
                                                put('fan_speed_max', '30')
-                                               put('brim_line_count', '8')
                                        if self.printTypeNormal.GetValue():
                                                put('layer_height', '0.21')
                                                put('wall_thickness', '1.05')
@@ -523,7 +518,6 @@ end.gcode = M104 S0
                                        put('fan_full_height', '1')
                                        put('fan_speed', '75')
                                        put('cool_min_feedrate', '15')
-                                       put('brim_line_count', '2')
                                        put('skirt_line_count', '3')
                                        put('fill_overlap', '0')
                                if self.printTypeNormal.GetValue():
@@ -544,7 +538,6 @@ end.gcode = M104 S0
                                        put('fan_full_height', '1')
                                        put('fan_speed', '75')
                                        put('cool_min_feedrate', '15')
-                                       put('brim_line_count', '2')
                                        put('skirt_line_count', '3')
                                if self.printTypeHigh.GetValue():
                                        put('layer_height', '0.14')
@@ -563,7 +556,6 @@ end.gcode = M104 S0
                                        put('cool_min_layer_time', '20')
                                        put('skirt_minimal_length', '0')
                                        put('fan_full_height', '0.28')
-                                       put('brim_line_count', '3')
                                        put('skirt_line_count', '2')
                                        put('fill_overlap', '10')
                elif not profile.getMachineSetting('machine_type') == 'lulzbot_mini' and not profile.getMachineSetting('machine_type') == 'lulzbot_TAZ':