import ConfigParser
import os, sys
+import types
from fabmetheus_utilities import archive
+def defaultSetting(setting):
+ return setting.value
+
+def storedSetting(name):
+ return lambda setting: getSetting(name, setting.value)
+
def getSkeinPyPyProfileInformation():
return {
'carve': {
- 'Add_Layer_Template_to_SVG': 'ignore',
- 'Edge_Width_mm': 'save',
- 'Extra_Decimal_Places_float': 'ignore',
- 'Import_Coarseness_ratio': 'ignore',
- 'Layer_Height_mm': 'save',
- 'Layers_From_index': 'ignore',
- 'Layers_To_index': 'ignore',
- 'Correct_Mesh': 'ignore',
- 'Unproven_Mesh': 'ignore',
- 'SVG_Viewer': 'ignore',
+ 'Add_Layer_Template_to_SVG': defaultSetting,
+ 'Edge_Width_mm': defaultSetting,
+ 'Extra_Decimal_Places_float': defaultSetting,
+ 'Import_Coarseness_ratio': defaultSetting,
+ 'Layer_Height_mm': storedSetting("layer_height"),
+ 'Layers_From_index': defaultSetting,
+ 'Layers_To_index': defaultSetting,
+ 'Correct_Mesh': defaultSetting,
+ 'Unproven_Mesh': defaultSetting,
+ 'SVG_Viewer': defaultSetting,
},'scale': {
- 'Activate_Scale': 'ignore',
- 'XY_Plane_Scale_ratio': 'ignore',
- 'Z_Axis_Scale_ratio': 'ignore',
- 'SVG_Viewer': 'ignore',
+ 'Activate_Scale': defaultSetting,
+ 'XY_Plane_Scale_ratio': defaultSetting,
+ 'Z_Axis_Scale_ratio': defaultSetting,
+ 'SVG_Viewer': defaultSetting,
},'bottom': {
- 'Activate_Bottom': 'ignore',
- 'Additional_Height_over_Layer_Thickness_ratio': 'ignore',
- 'Altitude_mm': 'ignore',
- 'SVG_Viewer': 'ignore',
+ 'Activate_Bottom': defaultSetting,
+ 'Additional_Height_over_Layer_Thickness_ratio': defaultSetting,
+ 'Altitude_mm': defaultSetting,
+ 'SVG_Viewer': defaultSetting,
},'preface': {
- 'Meta': 'ignore',
- 'Set_Positioning_to_Absolute': 'ignore',
- 'Set_Units_to_Millimeters': 'ignore',
- 'Start_at_Home': 'ignore',
- 'Turn_Extruder_Off_at_Shut_Down': 'ignore',
- 'Turn_Extruder_Off_at_Start_Up': 'ignore',
+ 'Meta': defaultSetting,
+ 'Set_Positioning_to_Absolute': defaultSetting,
+ 'Set_Units_to_Millimeters': defaultSetting,
+ 'Start_at_Home': defaultSetting,
+ 'Turn_Extruder_Off_at_Shut_Down': defaultSetting,
+ 'Turn_Extruder_Off_at_Start_Up': defaultSetting,
},'widen': {
- 'Activate_Widen': 'save',
+ 'Activate_Widen': defaultSetting,
},'inset': {
- 'Add_Custom_Code_for_Temperature_Reading': 'ignore',
- 'Infill_in_Direction_of_Bridge': 'ignore',
- 'Infill_Width_over_Thickness_ratio': 'ignore',
- 'Loop_Order_Choice': 'ignore',
- 'Overlap_Removal_Width_over_Perimeter_Width_ratio': 'ignore',
- 'Turn_Extruder_Heater_Off_at_Shut_Down': 'ignore',
- 'Volume_Fraction_ratio': 'ignore',
+ 'Add_Custom_Code_for_Temperature_Reading': defaultSetting,
+ 'Infill_in_Direction_of_Bridge': defaultSetting,
+ 'Infill_Width_over_Thickness_ratio': defaultSetting,
+ 'Loop_Order_Choice': defaultSetting,
+ 'Overlap_Removal_Width_over_Perimeter_Width_ratio': defaultSetting,
+ 'Turn_Extruder_Heater_Off_at_Shut_Down': defaultSetting,
+ 'Volume_Fraction_ratio': defaultSetting,
},'fill': {
- 'Activate_Fill': 'save',
- 'Diaphragm_Period_layers': 'save',
- 'Diaphragm_Thickness_layers': 'save',
- 'Extra_Shells_on_Alternating_Solid_Layer_layers': 'save',
- 'Extra_Shells_on_Base_layers': 'save',
- 'Extra_Shells_on_Sparse_Layer_layers': 'save',
- 'Grid_Circle_Separation_over_Perimeter_Width_ratio': 'ignore',
- 'Grid_Extra_Overlap_ratio': 'ignore',
- 'Grid_Junction_Separation_Band_Height_layers': 'ignore',
- 'Grid_Junction_Separation_over_Octogon_Radius_At_End_ratio': 'ignore',
- 'Grid_Junction_Separation_over_Octogon_Radius_At_Middle_ratio': 'ignore',
- 'Infill_Begin_Rotation_degrees': 'ignore',
- 'Infill_Begin_Rotation_Repeat_layers': 'ignore',
- 'Infill_Odd_Layer_Extra_Rotation_degrees': 'ignore',
- 'Grid_Circular': 'ignore',
- 'Grid_Hexagonal': 'ignore',
- 'Grid_Rectangular': 'ignore',
- 'Line': 'ignore',
- 'Infill_Perimeter_Overlap_ratio': 'save',
- 'Infill_Solidity_ratio': 'save',
- 'Infill_Width': 'use:carve:Edge_Width_mm',
- 'Solid_Surface_Thickness_layers': 'save',
- 'Start_From_Choice': 'ignore',
- 'Surrounding_Angle_degrees': 'ignore',
- 'Thread_Sequence_Choice': 'save',
+ 'Activate_Fill': defaultSetting,
+ 'Diaphragm_Period_layers': defaultSetting,
+ 'Diaphragm_Thickness_layers': defaultSetting,
+ 'Extra_Shells_on_Alternating_Solid_Layer_layers': defaultSetting,
+ 'Extra_Shells_on_Base_layers': defaultSetting,
+ 'Extra_Shells_on_Sparse_Layer_layers': defaultSetting,
+ 'Grid_Circle_Separation_over_Perimeter_Width_ratio': defaultSetting,
+ 'Grid_Extra_Overlap_ratio': defaultSetting,
+ 'Grid_Junction_Separation_Band_Height_layers': defaultSetting,
+ 'Grid_Junction_Separation_over_Octogon_Radius_At_End_ratio': defaultSetting,
+ 'Grid_Junction_Separation_over_Octogon_Radius_At_Middle_ratio': defaultSetting,
+ 'Infill_Begin_Rotation_degrees': defaultSetting,
+ 'Infill_Begin_Rotation_Repeat_layers': defaultSetting,
+ 'Infill_Odd_Layer_Extra_Rotation_degrees': defaultSetting,
+ 'Grid_Circular': defaultSetting,
+ 'Grid_Hexagonal': defaultSetting,
+ 'Grid_Rectangular': defaultSetting,
+ 'Line': defaultSetting,
+ 'Infill_Perimeter_Overlap_ratio': defaultSetting,
+ 'Infill_Solidity_ratio': defaultSetting,
+ 'Infill_Width': defaultSetting,
+ 'Solid_Surface_Thickness_layers': defaultSetting,
+ 'Start_From_Choice': defaultSetting,
+ 'Surrounding_Angle_degrees': defaultSetting,
+ 'Thread_Sequence_Choice': defaultSetting,
},'multiply': {
- 'Activate_Multiply': 'ignore',
- 'Center_X_mm': 'save',
- 'Center_Y_mm': 'save',
- 'Number_of_Columns_integer': 'save',
- 'Number_of_Rows_integer': 'save',
- 'Reverse_Sequence_every_Odd_Layer': 'ignore',
- 'Separation_over_Perimeter_Width_ratio': 'save',
+ 'Activate_Multiply': "True",
+ 'Center_X_mm': storedSetting("centerX"),
+ 'Center_Y_mm': storedSetting("centerY"),
+ 'Number_of_Columns_integer': "1",
+ 'Number_of_Rows_integer': "1",
+ 'Reverse_Sequence_every_Odd_Layer': defaultSetting,
+ 'Separation_over_Perimeter_Width_ratio': defaultSetting,
},'speed': {
- 'Activate_Speed': 'ignore',
- 'Add_Flow_Rate': 'ignore',
- 'Bridge_Feed_Rate_Multiplier_ratio': 'ignore',
- 'Bridge_Flow_Rate_Multiplier_ratio': 'ignore',
- 'Duty_Cyle_at_Beginning_portion': 'ignore',
- 'Duty_Cyle_at_Ending_portion': 'ignore',
- 'Feed_Rate_mm/s': 'save',
- 'Flow_Rate_Setting_float': 'use:speed:Feed_Rate_mm/s',
- 'Object_First_Layer_Feed_Rate_Infill_Multiplier_ratio': 'save',
- 'Object_First_Layer_Feed_Rate_Perimeter_Multiplier_ratio': 'use:speed:Object_First_Layer_Feed_Rate_Infill_Multiplier_ratio',
- 'Object_First_Layer_Feed_Rate_Travel_Multiplier_ratio': 'use:speed:Object_First_Layer_Feed_Rate_Infill_Multiplier_ratio',
- 'Object_First_Layer_Flow_Rate_Infill_Multiplier_ratio': 'use:speed:Object_First_Layer_Feed_Rate_Infill_Multiplier_ratio',
- 'Object_First_Layer_Flow_Rate_Perimeter_Multiplier_ratio': 'use:speed:Object_First_Layer_Feed_Rate_Infill_Multiplier_ratio',
- 'Object_First_Layers_Amount_Of_Layers_For_Speed_Change': 'save',
- 'Orbital_Feed_Rate_over_Operating_Feed_Rate_ratio': 'ignore',
- 'Maximum_Z_Feed_Rate_mm/s': 'save',
- 'Perimeter_Feed_Rate_Multiplier_ratio': 'ignore',
- 'Perimeter_Flow_Rate_Multiplier_ratio': 'ignore',
- 'Travel_Feed_Rate_mm/s': 'save',
+ 'Activate_Speed': "True",
+ 'Add_Flow_Rate': "True",
+ 'Bridge_Feed_Rate_Multiplier_ratio': defaultSetting,
+ 'Bridge_Flow_Rate_Multiplier_ratio': defaultSetting,
+ 'Duty_Cyle_at_Beginning_portion': defaultSetting,
+ 'Duty_Cyle_at_Ending_portion': defaultSetting,
+ 'Feed_Rate_mm/s': storedSetting("print_speed"),
+ 'Flow_Rate_Setting_float': storedSetting("print_speed"),
+ 'Object_First_Layer_Feed_Rate_Infill_Multiplier_ratio': defaultSetting,
+ 'Object_First_Layer_Feed_Rate_Perimeter_Multiplier_ratio': defaultSetting,
+ 'Object_First_Layer_Feed_Rate_Travel_Multiplier_ratio': defaultSetting,
+ 'Object_First_Layer_Flow_Rate_Infill_Multiplier_ratio': defaultSetting,
+ 'Object_First_Layer_Flow_Rate_Perimeter_Multiplier_ratio': defaultSetting,
+ 'Object_First_Layers_Amount_Of_Layers_For_Speed_Change': defaultSetting,
+ 'Orbital_Feed_Rate_over_Operating_Feed_Rate_ratio': defaultSetting,
+ 'Maximum_Z_Feed_Rate_mm/s': defaultSetting,
+ 'Perimeter_Feed_Rate_Multiplier_ratio': defaultSetting,
+ 'Perimeter_Flow_Rate_Multiplier_ratio': defaultSetting,
+ 'Travel_Feed_Rate_mm/s': storedSetting("travel_speed"),
},'temperature': {
- 'Activate_Temperature': 'ignore',
- 'Cooling_Rate_Celcius/second': 'ignore',
- 'Heating_Rate_Celcius/second': 'ignore',
- 'Base_Temperature_Celcius': 'ignore',
- 'Interface_Temperature_Celcius': 'ignore',
- 'Object_First_Layer_Infill_Temperature_Celcius': 'ignore',
- 'Object_First_Layer_Perimeter_Temperature_Celcius': 'ignore',
- 'Object_Next_Layers_Temperature_Celcius': 'ignore',
- 'Support_Layers_Temperature_Celcius': 'ignore',
- 'Supported_Layers_Temperature_Celcius': 'ignore',
+ 'Activate_Temperature': defaultSetting,
+ 'Cooling_Rate_Celcius/second': defaultSetting,
+ 'Heating_Rate_Celcius/second': defaultSetting,
+ 'Base_Temperature_Celcius': defaultSetting,
+ 'Interface_Temperature_Celcius': defaultSetting,
+ 'Object_First_Layer_Infill_Temperature_Celcius': defaultSetting,
+ 'Object_First_Layer_Perimeter_Temperature_Celcius': defaultSetting,
+ 'Object_Next_Layers_Temperature_Celcius': defaultSetting,
+ 'Support_Layers_Temperature_Celcius': defaultSetting,
+ 'Supported_Layers_Temperature_Celcius': defaultSetting,
},'raft': {
- 'Activate_Raft': 'ignore',
- 'Add_Raft,_Elevate_Nozzle,_Orbit': 'ignore',
- 'Base_Feed_Rate_Multiplier_ratio': 'ignore',
- 'Base_Flow_Rate_Multiplier_ratio': 'ignore',
- 'Base_Infill_Density_ratio': 'ignore',
- 'Base_Layer_Thickness_over_Layer_Thickness': 'ignore',
- 'Base_Layers_integer': 'ignore',
- 'Base_Nozzle_Lift_over_Base_Layer_Thickness_ratio': 'ignore',
- 'Initial_Circling': 'ignore',
- 'Infill_Overhang_over_Extrusion_Width_ratio': 'ignore',
- 'Interface_Feed_Rate_Multiplier_ratio': 'ignore',
- 'Interface_Flow_Rate_Multiplier_ratio': 'ignore',
- 'Interface_Infill_Density_ratio': 'ignore',
- 'Interface_Layer_Thickness_over_Layer_Thickness': 'ignore',
- 'Interface_Layers_integer': 'ignore',
- 'Interface_Nozzle_Lift_over_Interface_Layer_Thickness_ratio': 'ignore',
- 'Name_of_Support_End_File': 'ignore',
- 'Name_of_Support_Start_File': 'ignore',
- 'Operating_Nozzle_Lift_over_Layer_Thickness_ratio': 'ignore',
- 'Raft_Additional_Margin_over_Length_%': 'ignore',
- 'Raft_Margin_mm': 'ignore',
- 'Support_Cross_Hatch': 'save',
- 'Support_Flow_Rate_over_Operating_Flow_Rate_ratio': 'save',
- 'Support_Gap_over_Perimeter_Extrusion_Width_ratio': 'save',
- 'Support_Material_Choice_': 'save',
- 'Support_Minimum_Angle_degrees': 'save',
+ 'Activate_Raft': defaultSetting,
+ 'Add_Raft,_Elevate_Nozzle,_Orbit': defaultSetting,
+ 'Base_Feed_Rate_Multiplier_ratio': defaultSetting,
+ 'Base_Flow_Rate_Multiplier_ratio': defaultSetting,
+ 'Base_Infill_Density_ratio': defaultSetting,
+ 'Base_Layer_Thickness_over_Layer_Thickness': defaultSetting,
+ 'Base_Layers_integer': defaultSetting,
+ 'Base_Nozzle_Lift_over_Base_Layer_Thickness_ratio': defaultSetting,
+ 'Initial_Circling': defaultSetting,
+ 'Infill_Overhang_over_Extrusion_Width_ratio': defaultSetting,
+ 'Interface_Feed_Rate_Multiplier_ratio': defaultSetting,
+ 'Interface_Flow_Rate_Multiplier_ratio': defaultSetting,
+ 'Interface_Infill_Density_ratio': defaultSetting,
+ 'Interface_Layer_Thickness_over_Layer_Thickness': defaultSetting,
+ 'Interface_Layers_integer': defaultSetting,
+ 'Interface_Nozzle_Lift_over_Interface_Layer_Thickness_ratio': defaultSetting,
+ 'Name_of_Support_End_File': defaultSetting,
+ 'Name_of_Support_Start_File': defaultSetting,
+ 'Operating_Nozzle_Lift_over_Layer_Thickness_ratio': defaultSetting,
+ 'Raft_Additional_Margin_over_Length_%': defaultSetting,
+ 'Raft_Margin_mm': defaultSetting,
+ 'Support_Cross_Hatch': defaultSetting,
+ 'Support_Flow_Rate_over_Operating_Flow_Rate_ratio': defaultSetting,
+ 'Support_Gap_over_Perimeter_Extrusion_Width_ratio': defaultSetting,
+ 'Support_Material_Choice_': defaultSetting,
+ 'Support_Minimum_Angle_degrees': defaultSetting,
},'skirt': {
- 'Skirt_line_count': 'save',
- 'Convex': 'ignore',
- 'Gap_Width_mm': 'save',
- 'Layers_To_index': 'ignore',
+ 'Skirt_line_count': storedSetting("skirt_line_count"),
+ 'Convex': "True",
+ 'Gap_Width_mm': storedSetting("skirt_gap"),
+ 'Layers_To_index': "1",
},'chamber': {
- 'Activate_Chamber': 'ignore',
- 'Bed_Temperature_Celcius': 'ignore',
- 'Bed_Temperature_Begin_Change_Height_mm': 'ignore',
- 'Bed_Temperature_End_Change_Height_mm': 'ignore',
- 'Bed_Temperature_End_Celcius': 'ignore',
- 'Chamber_Temperature_Celcius': 'ignore',
- 'Holding_Force_bar': 'ignore',
+ 'Activate_Chamber': defaultSetting,
+ 'Bed_Temperature_Celcius': defaultSetting,
+ 'Bed_Temperature_Begin_Change_Height_mm': defaultSetting,
+ 'Bed_Temperature_End_Change_Height_mm': defaultSetting,
+ 'Bed_Temperature_End_Celcius': defaultSetting,
+ 'Chamber_Temperature_Celcius': defaultSetting,
+ 'Holding_Force_bar': defaultSetting,
},'tower': {
- 'Activate_Tower': 'ignore',
- 'Extruder_Possible_Collision_Cone_Angle_degrees': 'ignore',
- 'Maximum_Tower_Height_layers': 'ignore',
- 'Tower_Start_Layer_integer': 'ignore',
+ 'Activate_Tower': defaultSetting,
+ 'Extruder_Possible_Collision_Cone_Angle_degrees': defaultSetting,
+ 'Maximum_Tower_Height_layers': defaultSetting,
+ 'Tower_Start_Layer_integer': defaultSetting,
},'jitter': {
- 'Activate_Jitter': 'ignore',
- 'Jitter_Over_Perimeter_Width_ratio': 'ignore',
+ 'Activate_Jitter': defaultSetting,
+ 'Jitter_Over_Perimeter_Width_ratio': defaultSetting,
},'clip': {
- 'Activate_Clip': 'ignore',
- 'Clip_Over_Perimeter_Width_ratio': 'ignore',
- 'Maximum_Connection_Distance_Over_Perimeter_Width_ratio': 'ignore',
+ 'Activate_Clip': defaultSetting,
+ 'Clip_Over_Perimeter_Width_ratio': defaultSetting,
+ 'Maximum_Connection_Distance_Over_Perimeter_Width_ratio': defaultSetting,
},'smooth': {
- 'Activate_Smooth': 'ignore',
- 'Layers_From_index': 'ignore',
- 'Maximum_Shortening_over_Width_float': 'ignore',
+ 'Activate_Smooth': defaultSetting,
+ 'Layers_From_index': defaultSetting,
+ 'Maximum_Shortening_over_Width_float': defaultSetting,
},'stretch': {
- 'Activate_Stretch': 'ignore',
- 'Cross_Limit_Distance_Over_Perimeter_Width_ratio': 'ignore',
- 'Loop_Stretch_Over_Perimeter_Width_ratio': 'ignore',
- 'Path_Stretch_Over_Perimeter_Width_ratio': 'ignore',
- 'Perimeter_Inside_Stretch_Over_Perimeter_Width_ratio': 'ignore',
- 'Perimeter_Outside_Stretch_Over_Perimeter_Width_ratio': 'ignore',
- 'Stretch_From_Distance_Over_Perimeter_Width_ratio': 'ignore',
+ 'Activate_Stretch': defaultSetting,
+ 'Cross_Limit_Distance_Over_Perimeter_Width_ratio': defaultSetting,
+ 'Loop_Stretch_Over_Perimeter_Width_ratio': defaultSetting,
+ 'Path_Stretch_Over_Perimeter_Width_ratio': defaultSetting,
+ 'Perimeter_Inside_Stretch_Over_Perimeter_Width_ratio': defaultSetting,
+ 'Perimeter_Outside_Stretch_Over_Perimeter_Width_ratio': defaultSetting,
+ 'Stretch_From_Distance_Over_Perimeter_Width_ratio': defaultSetting,
},'skin': {
- 'Activate_Skin': 'ignore',
- 'Horizontal_Infill_Divisions_integer': 'ignore',
- 'Horizontal_Perimeter_Divisions_integer': 'ignore',
- 'Vertical_Divisions_integer': 'ignore',
- 'Hop_When_Extruding_Infill': 'ignore',
- 'Layers_From_index': 'ignore',
+ 'Activate_Skin': defaultSetting,
+ 'Horizontal_Infill_Divisions_integer': defaultSetting,
+ 'Horizontal_Perimeter_Divisions_integer': defaultSetting,
+ 'Vertical_Divisions_integer': defaultSetting,
+ 'Hop_When_Extruding_Infill': defaultSetting,
+ 'Layers_From_index': defaultSetting,
},'comb': {
- 'Activate_Comb': 'ignore',
- 'Running_Jump_Space_mm': 'ignore',
+ 'Activate_Comb': defaultSetting,
+ 'Running_Jump_Space_mm': defaultSetting,
},'cool': {
- 'Activate_Cool': 'save',
- 'Bridge_Cool_Celcius': 'ignore',
- 'Cool_Type': 'save',
- 'Maximum_Cool_Celcius': 'ignore',
- 'Minimum_Layer_Time_seconds': 'save',
- 'Minimum_Orbital_Radius_millimeters': 'ignore',
- 'Name_of_Cool_End_File': 'ignore',
- 'Name_of_Cool_Start_File': 'ignore',
- 'Orbital_Outset_millimeters': 'ignore',
- 'Turn_Fan_On_at_Beginning': 'ignore',
- 'Turn_Fan_Off_at_Ending': 'ignore',
+ 'Activate_Cool': defaultSetting,
+ 'Bridge_Cool_Celcius': defaultSetting,
+ 'Cool_Type': defaultSetting,
+ 'Maximum_Cool_Celcius': defaultSetting,
+ 'Minimum_Layer_Time_seconds': defaultSetting,
+ 'Minimum_Orbital_Radius_millimeters': defaultSetting,
+ 'Name_of_Cool_End_File': defaultSetting,
+ 'Name_of_Cool_Start_File': defaultSetting,
+ 'Orbital_Outset_millimeters': defaultSetting,
+ 'Turn_Fan_On_at_Beginning': defaultSetting,
+ 'Turn_Fan_Off_at_Ending': defaultSetting,
},'hop': {
- 'Activate_Hop': 'ignore',
- 'Hop_Over_Layer_Thickness_ratio': 'ignore',
- 'Minimum_Hop_Angle_degrees': 'ignore',
+ 'Activate_Hop': defaultSetting,
+ 'Hop_Over_Layer_Thickness_ratio': defaultSetting,
+ 'Minimum_Hop_Angle_degrees': defaultSetting,
},'wipe': {
- 'Activate_Wipe': 'ignore',
- 'Arrival_X_mm': 'ignore',
- 'Arrival_Y_mm': 'ignore',
- 'Arrival_Z_mm': 'ignore',
- 'Departure_X_mm': 'ignore',
- 'Departure_Y_mm': 'ignore',
- 'Departure_Z_mm': 'ignore',
- 'Wipe_X_mm': 'ignore',
- 'Wipe_Y_mm': 'ignore',
- 'Wipe_Z_mm': 'ignore',
- 'Wipe_Period_layers': 'ignore',
+ 'Activate_Wipe': defaultSetting,
+ 'Arrival_X_mm': defaultSetting,
+ 'Arrival_Y_mm': defaultSetting,
+ 'Arrival_Z_mm': defaultSetting,
+ 'Departure_X_mm': defaultSetting,
+ 'Departure_Y_mm': defaultSetting,
+ 'Departure_Z_mm': defaultSetting,
+ 'Wipe_X_mm': defaultSetting,
+ 'Wipe_Y_mm': defaultSetting,
+ 'Wipe_Z_mm': defaultSetting,
+ 'Wipe_Period_layers': defaultSetting,
},'oozebane': {
- 'Activate_Oozebane': 'ignore',
- 'After_Startup_Distance_millimeters': 'ignore',
- 'Early_Shutdown_Distance_millimeters': 'ignore',
- 'Early_Startup_Distance_Constant_millimeters': 'ignore',
- 'Early_Startup_Maximum_Distance_millimeters': 'ignore',
- 'First_Early_Startup_Distance_millimeters': 'ignore',
- 'Minimum_Distance_for_Early_Startup_millimeters': 'ignore',
- 'Minimum_Distance_for_Early_Shutdown_millimeters': 'ignore',
- 'Slowdown_Startup_Steps_positive_integer': 'ignore',
+ 'Activate_Oozebane': defaultSetting,
+ 'After_Startup_Distance_millimeters': defaultSetting,
+ 'Early_Shutdown_Distance_millimeters': defaultSetting,
+ 'Early_Startup_Distance_Constant_millimeters': defaultSetting,
+ 'Early_Startup_Maximum_Distance_millimeters': defaultSetting,
+ 'First_Early_Startup_Distance_millimeters': defaultSetting,
+ 'Minimum_Distance_for_Early_Startup_millimeters': defaultSetting,
+ 'Minimum_Distance_for_Early_Shutdown_millimeters': defaultSetting,
+ 'Slowdown_Startup_Steps_positive_integer': defaultSetting,
},'dwindle': {
- 'Activate_Dwindle': 'ignore',
- 'End_Rate_Multiplier_ratio': 'ignore',
- 'Pent_Up_Volume_cubic_millimeters': 'ignore',
- 'Slowdown_Steps_positive_integer': 'ignore',
- 'Slowdown_Volume_cubic_millimeters': 'ignore',
+ 'Activate_Dwindle': defaultSetting,
+ 'End_Rate_Multiplier_ratio': defaultSetting,
+ 'Pent_Up_Volume_cubic_millimeters': defaultSetting,
+ 'Slowdown_Steps_positive_integer': defaultSetting,
+ 'Slowdown_Volume_cubic_millimeters': defaultSetting,
},'splodge': {
- 'Activate_Splodge': 'ignore',
- 'Initial_Lift_over_Extra_Thickness_ratio': 'ignore',
- 'Initial_Splodge_Feed_Rate_mm/s': 'ignore',
- 'Operating_Splodge_Feed_Rate_mm/s': 'ignore',
- 'Operating_Splodge_Quantity_Length_millimeters': 'ignore',
- 'Initial_Splodge_Quantity_Length_millimeters': 'ignore',
- 'Operating_Lift_over_Extra_Thickness_ratio': 'ignore',
+ 'Activate_Splodge': defaultSetting,
+ 'Initial_Lift_over_Extra_Thickness_ratio': defaultSetting,
+ 'Initial_Splodge_Feed_Rate_mm/s': defaultSetting,
+ 'Operating_Splodge_Feed_Rate_mm/s': defaultSetting,
+ 'Operating_Splodge_Quantity_Length_millimeters': defaultSetting,
+ 'Initial_Splodge_Quantity_Length_millimeters': defaultSetting,
+ 'Operating_Lift_over_Extra_Thickness_ratio': defaultSetting,
},'home': {
- 'Activate_Home': 'ignore',
- 'Name_of_Home_File': 'ignore',
+ 'Activate_Home': defaultSetting,
+ 'Name_of_Home_File': defaultSetting,
},'lash': {
- 'Activate_Lash': 'ignore',
- 'X_Backlash_mm': 'ignore',
- 'Y_Backlash_mm': 'ignore',
+ 'Activate_Lash': defaultSetting,
+ 'X_Backlash_mm': defaultSetting,
+ 'Y_Backlash_mm': defaultSetting,
},'fillet': {
- 'Activate_Fillet': 'ignore',
- 'Arc_Point': 'ignore',
- 'Arc_Radius': 'ignore',
- 'Arc_Segment': 'ignore',
- 'Bevel': 'ignore',
- 'Corner_Feed_Rate_Multiplier_ratio': 'ignore',
- 'Fillet_Radius_over_Perimeter_Width_ratio': 'ignore',
- 'Reversal_Slowdown_Distance_over_Perimeter_Width_ratio': 'ignore',
- 'Use_Intermediate_Feed_Rate_in_Corners': 'ignore',
+ 'Activate_Fillet': defaultSetting,
+ 'Arc_Point': defaultSetting,
+ 'Arc_Radius': defaultSetting,
+ 'Arc_Segment': defaultSetting,
+ 'Bevel': defaultSetting,
+ 'Corner_Feed_Rate_Multiplier_ratio': defaultSetting,
+ 'Fillet_Radius_over_Perimeter_Width_ratio': defaultSetting,
+ 'Reversal_Slowdown_Distance_over_Perimeter_Width_ratio': defaultSetting,
+ 'Use_Intermediate_Feed_Rate_in_Corners': defaultSetting,
},'limit': {
- 'Activate_Limit': 'ignore',
- 'Maximum_Initial_Feed_Rate_mm/s': 'ignore',
+ 'Activate_Limit': defaultSetting,
+ 'Maximum_Initial_Feed_Rate_mm/s': defaultSetting,
},'unpause': {
- 'Activate_Unpause': 'ignore',
- 'Delay_milliseconds': 'ignore',
- 'Maximum_Speed_ratio': 'ignore',
+ 'Activate_Unpause': defaultSetting,
+ 'Delay_milliseconds': defaultSetting,
+ 'Maximum_Speed_ratio': defaultSetting,
},'dimension': {
- 'Activate_Dimension': 'ignore',
- 'Absolute_Extrusion_Distance': 'ignore',
- 'Relative_Extrusion_Distance': 'ignore',
- 'Extruder_Retraction_Speed_mm/s': 'save',
- 'Filament_Diameter_mm': 'save',
- 'Filament_Packing_Density_ratio': 'save',
- 'Maximum_E_Value_before_Reset_float': 'ignore',
- 'Minimum_Travel_for_Retraction_millimeters': 'save',
- 'Retract_Within_Island': 'save',
- 'Retraction_Distance_millimeters': 'save',
- 'Restart_Extra_Distance_millimeters': 'save',
+ 'Activate_Dimension': defaultSetting,
+ 'Absolute_Extrusion_Distance': defaultSetting,
+ 'Relative_Extrusion_Distance': defaultSetting,
+ 'Extruder_Retraction_Speed_mm/s': defaultSetting,
+ 'Filament_Diameter_mm': defaultSetting,
+ 'Filament_Packing_Density_ratio': defaultSetting,
+ 'Maximum_E_Value_before_Reset_float': defaultSetting,
+ 'Minimum_Travel_for_Retraction_millimeters': defaultSetting,
+ 'Retract_Within_Island': defaultSetting,
+ 'Retraction_Distance_millimeters': defaultSetting,
+ 'Restart_Extra_Distance_millimeters': defaultSetting,
},'alteration': {
- 'Activate_Alteration': 'ignore',
- 'Name_of_End_File': 'ignore',
- 'Name_of_Start_File': 'ignore',
- 'Remove_Redundant_Mcode': 'ignore',
- 'Replace_Variable_with_Setting': 'ignore',
+ 'Activate_Alteration': defaultSetting,
+ 'Name_of_End_File': defaultSetting,
+ 'Name_of_Start_File': defaultSetting,
+ 'Remove_Redundant_Mcode': defaultSetting,
+ 'Replace_Variable_with_Setting': defaultSetting,
},'export': {
- 'Activate_Export': 'ignore',
- 'Add_Descriptive_Extension': 'ignore',
- 'Add_Export_Suffix': 'ignore',
- 'Add_Profile_Extension': 'ignore',
- 'Add_Timestamp_Extension': 'ignore',
- 'Also_Send_Output_To': 'ignore',
- 'Analyze_Gcode': 'ignore',
- 'Comment_Choice': 'ignore',
- 'Do_Not_Change_Output': 'ignore',
- 'binary_16_byte': 'ignore',
- 'gcode_step': 'ignore',
- 'gcode_time_segment': 'ignore',
- 'gcode_small': 'ignore',
- 'File_Extension': 'ignore',
- 'Name_of_Replace_File': 'ignore',
- 'Save_Penultimate_Gcode': 'ignore',
+ 'Activate_Export': defaultSetting,
+ 'Add_Descriptive_Extension': defaultSetting,
+ 'Add_Export_Suffix': defaultSetting,
+ 'Add_Profile_Extension': defaultSetting,
+ 'Add_Timestamp_Extension': defaultSetting,
+ 'Also_Send_Output_To': defaultSetting,
+ 'Analyze_Gcode': defaultSetting,
+ 'Comment_Choice': defaultSetting,
+ 'Do_Not_Change_Output': defaultSetting,
+ 'binary_16_byte': defaultSetting,
+ 'gcode_step': defaultSetting,
+ 'gcode_time_segment': defaultSetting,
+ 'gcode_small': defaultSetting,
+ 'File_Extension': defaultSetting,
+ 'Name_of_Replace_File': defaultSetting,
+ 'Save_Penultimate_Gcode': defaultSetting,
}
}
def saveGlobalProfile(filename):
globalProfileParser.write(open(filename, 'w'))
+def getSetting(name, default = ""):
+ #Check if we have a configuration file loaded, else load the default.
+ if not globals().has_key('globalProfileParser'):
+ loadGlobalProfile(getDefaultProfilePath())
+ if not globalProfileParser.has_option("profile", name):
+ if not globalProfileParser.has_section("profile"):
+ globalProfileParser.add_section("profile")
+ globalProfileParser.set("profile", name, str(default))
+ return default
+ return globalProfileParser.get("profile", name)
+
+def putSetting(name, value):
+ #Check if we have a configuration file loaded, else load the default.
+ if not globals().has_key('globalProfileParser'):
+ loadGlobalProfile(getDefaultProfilePath())
+ if not globalProfileParser.has_section("profile"):
+ globalProfileParser.add_section("profile")
+ globalProfileParser.set("profile", name, str(value))
+
def getDefaultProfilePath():
return os.path.normpath(os.path.join(os.path.dirname(os.path.abspath(__file__)), "../current_profile.ini"))
def getReadRepository(repository):
"Read the configuration for this 'repository'"
- #Check if we have a configuration file loaded, else load the default.
- if not globals().has_key('globalProfileParser'):
- loadGlobalProfile(getDefaultProfilePath())
-
info = getSkeinPyPyProfileInformation()
if not info.has_key(repository.name):
print "Warning: Plugin: " + repository.name + " missing from SkeinPyPy info"
if not info.has_key(name):
print "Setting: " + repository.name + ":" + name + " missing from SkeinPyPy info"
continue
- #ignore this setting, use the default, always
- if info[name] == 'ignore':
- continue
- #Load this setting from another value.
- if info[name][0:4] == "use:":
- i = info[name][4:].split(':')
- p.setValueToString(globalProfileParser.get(i[0], i[1]))
- continue
-
- try:
- p.setValueToString(globalProfileParser.get(repository.name, name))
- except (ConfigParser.NoSectionError, ConfigParser.NoOptionError):
- #Value not in configuration, add it.
- try:
- globalProfileParser.add_section(repository.name)
- except:
- pass
- globalProfileParser.set(repository.name, name, str(p.value))
- #saveGlobalProfile(getDefaultProfilePath())
- #print "============" + str(p) + "|" + p.name + "|" + str(p.value) + "|" + str(type(p.value))
- return repository
-
-def storeRepository(repository):
- "Store the configuration for this 'repository'"
- #Check if we have a configuration file loaded, else load the default.
- if not globals().has_key('globalProfileParser'):
- loadGlobalProfile(getDefaultProfilePath())
-
- info = getSkeinPyPyProfileInformation()
- if not info.has_key(repository.name):
- print "Warning: Plugin: " + repository.name + " missing from SkeinPyPy info"
- return repository
- info = info[repository.name]
- if not type(info) is dict:
- print "Ignoring plugin configuration: " + repository.name
- return repository
-
- for p in repository.preferences:
- name = safeConfigName(p.name)
- if not info.has_key(name):
- print "Setting: " + repository.name + ":" + name + " missing from SkeinPyPy info"
- continue
+ if isinstance(info[name], types.FunctionType):
+ p.setValueToString(str(info[name](p)))
+ else:
+ p.setValueToString(str(info[name]))
- if info[name] == "save":
- try:
- globalProfileParser.add_section(repository.name)
- except:
- pass
- globalProfileParser.set(repository.name, name, str(p.value))
return repository
def printProgress(layerIndex, procedureName):
- print ("Progress[" + procedureName + ":" + str(layerIndex) + "]")
+ print ("Progress[" + procedureName + ":" + str(layerIndex+1) + "]")
sys.stdout.flush()
def printProgressByNumber(layerIndex, numberOfLayers, procedureName):
- print ("Progress[" + procedureName + ":" + str(layerIndex) + ":" + str(numberOfLayers) + "]")
+ print ("Progress[" + procedureName + ":" + str(layerIndex+1) + ":" + str(numberOfLayers) + "]")
sys.stdout.flush()
def getAlterationFileLines(fileName):
"Main user interface window"
def __init__(self):
super(mainWindow, self).__init__(None, title='SkeinPyPy')
+
+ wx.EVT_CLOSE(self, self.OnClose)
+
menubar = wx.MenuBar()
fileMenu = wx.Menu()
fitem = fileMenu.Append(-1, 'Open Profile...', 'Open Profile...')
self.filename = None
self.progressPanelList = []
self.controlList = []
- self.plugins = {}
- for m in skeinforge_profile.getCraftTypePluginModule().getCraftSequence():
- self.plugins[m] = archive.getModuleWithDirectoryPath(archive.getCraftPluginsDirectoryPath(), m).getNewRepository()
- settings.getReadRepository(self.plugins[m])
- skeinPyPySettingInfo = settings.getSkeinPyPyProfileInformation()
-
- for pluginName in self.plugins.keys():
- self.plugins[pluginName].preferencesDict = {}
- for pref in self.plugins[pluginName].preferences:
- if skeinPyPySettingInfo[pluginName][settings.safeConfigName(pref.name)] == 'save':
- self.plugins[pluginName].preferencesDict[settings.safeConfigName(pref.name)] = pref
-
- p = self#wx.Panel(self)
- nb = wx.Notebook(p)
+ nb = wx.Notebook(self)
configPanel = wx.Panel(nb);
nb.AddPage(configPanel, "Print config")
sizer.Add(rightConfigPanel)
self.AddTitle(leftConfigPanel, "Accuracy")
- self.AddSetting(leftConfigPanel, "Layer height (mm)", self.plugins['carve'].preferencesDict['Layer_Height_mm'], 'Layer height in millimeters.\n0.2 is a good value for quick prints.\n0.1 gives high quality prints.')
+ self.AddSetting(leftConfigPanel, "Layer height (mm)", 'layer_height', 'Layer height in millimeters.\n0.2 is a good value for quick prints.\n0.1 gives high quality prints.')
self.AddTitle(leftConfigPanel, "Fill")
- self.AddSetting(leftConfigPanel, "Solid layers", self.plugins['fill'].preferencesDict['Solid_Surface_Thickness_layers'])
- self.AddSetting(leftConfigPanel, "Fill Density", self.plugins['fill'].preferencesDict['Infill_Solidity_ratio'])
+ #self.AddSetting(leftConfigPanel, "Solid layers", self.plugins['fill'].preferencesDict['Solid_Surface_Thickness_layers'])
+ #self.AddSetting(leftConfigPanel, "Fill Density", self.plugins['fill'].preferencesDict['Infill_Solidity_ratio'])
self.AddTitle(leftConfigPanel, "Skirt")
- self.AddSetting(leftConfigPanel, "Line count", self.plugins['skirt'].preferencesDict['Skirt_line_count'])
- self.AddSetting(leftConfigPanel, "Start distance (mm)", self.plugins['skirt'].preferencesDict['Gap_Width_mm'])
+ self.AddSetting(leftConfigPanel, "Line count", 'skirt_line_count')
+ self.AddSetting(leftConfigPanel, "Start distance (mm)", 'skirt_gap')
self.AddTitle(leftConfigPanel, "Cool")
#self.AddSetting(configPanel, "Cool type", self.plugins['cool'].preferencesDict['Cool_Type'])
- self.AddSetting(leftConfigPanel, "Minimal layer time", self.plugins['cool'].preferencesDict['Minimum_Layer_Time_seconds'])
+ #self.AddSetting(leftConfigPanel, "Minimal layer time", self.plugins['cool'].preferencesDict['Minimum_Layer_Time_seconds'])
self.AddTitle(rightConfigPanel, "Retraction")
- self.AddSetting(rightConfigPanel, "Speed (mm/s)", self.plugins['dimension'].preferencesDict['Extruder_Retraction_Speed_mm/s'])
- self.AddSetting(rightConfigPanel, "Distance (mm)", self.plugins['dimension'].preferencesDict['Retraction_Distance_millimeters'])
- self.AddSetting(rightConfigPanel, "Extra length on start (mm)", self.plugins['dimension'].preferencesDict['Restart_Extra_Distance_millimeters'])
- self.AddSetting(rightConfigPanel, "Minimal travel (mm)", self.plugins['dimension'].preferencesDict['Minimum_Travel_for_Retraction_millimeters'])
+ #self.AddSetting(rightConfigPanel, "Speed (mm/s)", self.plugins['dimension'].preferencesDict['Extruder_Retraction_Speed_mm/s'])
+ #self.AddSetting(rightConfigPanel, "Distance (mm)", self.plugins['dimension'].preferencesDict['Retraction_Distance_millimeters'])
+ #self.AddSetting(rightConfigPanel, "Extra length on start (mm)", self.plugins['dimension'].preferencesDict['Restart_Extra_Distance_millimeters'])
+ #self.AddSetting(rightConfigPanel, "Minimal travel (mm)", self.plugins['dimension'].preferencesDict['Minimum_Travel_for_Retraction_millimeters'])
configPanel = wx.Panel(nb);
nb.AddPage(configPanel, "Machine && Filament")
sizer.Add(rightConfigPanel)
self.AddTitle(leftConfigPanel, "Machine size")
- self.AddSetting(leftConfigPanel, "Width (mm)", settings.IntSpin().getFromValue(10, "machine_width", None, 1000, 205))
- self.AddSetting(leftConfigPanel, "Depth (mm)", settings.IntSpin().getFromValue(10, "machine_depth", None, 1000, 205))
- self.AddSetting(leftConfigPanel, "Height (mm)", settings.IntSpin().getFromValue(10, "machine_height", None, 1000, 200))
+ #self.AddSetting(leftConfigPanel, "Width (mm)", settings.IntSpin().getFromValue(10, "machine_width", None, 1000, 205))
+ #self.AddSetting(leftConfigPanel, "Depth (mm)", settings.IntSpin().getFromValue(10, "machine_depth", None, 1000, 205))
+ #self.AddSetting(leftConfigPanel, "Height (mm)", settings.IntSpin().getFromValue(10, "machine_height", None, 1000, 200))
self.AddTitle(leftConfigPanel, "Machine nozzle")
- self.AddSetting(leftConfigPanel, "Nozzle size (mm)", self.plugins['carve'].preferencesDict['Edge_Width_mm'])
+ #self.AddSetting(leftConfigPanel, "Nozzle size (mm)", self.plugins['carve'].preferencesDict['Edge_Width_mm'])
self.AddTitle(leftConfigPanel, "Speed")
- self.AddSetting(leftConfigPanel, "Print speed (mm/s)", self.plugins['speed'].preferencesDict['Feed_Rate_mm/s'])
- self.AddSetting(leftConfigPanel, "Travel speed (mm/s)", self.plugins['speed'].preferencesDict['Travel_Feed_Rate_mm/s'])
- self.AddSetting(leftConfigPanel, "Max Z speed (mm/z)", self.plugins['speed'].preferencesDict['Maximum_Z_Feed_Rate_mm/s'])
- self.AddSetting(leftConfigPanel, "Bottom Layer Speed Ratio", self.plugins['speed'].preferencesDict['Object_First_Layer_Feed_Rate_Infill_Multiplier_ratio'])
+ #self.AddSetting(leftConfigPanel, "Print speed (mm/s)", self.plugins['speed'].preferencesDict['Feed_Rate_mm/s'])
+ #self.AddSetting(leftConfigPanel, "Travel speed (mm/s)", self.plugins['speed'].preferencesDict['Travel_Feed_Rate_mm/s'])
+ #self.AddSetting(leftConfigPanel, "Max Z speed (mm/z)", self.plugins['speed'].preferencesDict['Maximum_Z_Feed_Rate_mm/s'])
+ #self.AddSetting(leftConfigPanel, "Bottom Layer Speed Ratio", self.plugins['speed'].preferencesDict['Object_First_Layer_Feed_Rate_Infill_Multiplier_ratio'])
self.AddTitle(rightConfigPanel, "Filament")
- self.AddSetting(rightConfigPanel, "Diameter (mm)", self.plugins['dimension'].preferencesDict['Filament_Diameter_mm'])
- self.AddSetting(rightConfigPanel, "Packing Density", self.plugins['dimension'].preferencesDict['Filament_Packing_Density_ratio'])
+ #self.AddSetting(rightConfigPanel, "Diameter (mm)", self.plugins['dimension'].preferencesDict['Filament_Diameter_mm'])
+ #self.AddSetting(rightConfigPanel, "Packing Density", self.plugins['dimension'].preferencesDict['Filament_Packing_Density_ratio'])
nb.AddPage(alterationPanel.alterationPanel(nb), "Start/End-GCode")
#Preview window, load and slice buttons.
- self.preview3d = preview3d.previewPanel(p)
+ self.preview3d = preview3d.previewPanel(self)
- loadButton = wx.Button(p, -1, 'Load STL')
- sliceButton = wx.Button(p, -1, 'Slice to GCode')
+ loadButton = wx.Button(self, -1, 'Load STL')
+ sliceButton = wx.Button(self, -1, 'Slice to GCode')
self.Bind(wx.EVT_BUTTON, self.OnLoadSTL, loadButton)
self.Bind(wx.EVT_BUTTON, self.OnSlice, sliceButton)
sizer = wx.GridBagSizer()
- p.SetSizer(sizer)
+ self.SetSizer(sizer)
sizer.Add(nb, (0,0), span=(1,1), flag=wx.EXPAND)
sizer.Add(self.preview3d, (0,1), span=(1,3), flag=wx.EXPAND)
sizer.AddGrowableCol(2)
sizer.Add(loadButton, (1,1))
sizer.Add(sliceButton, (1,2))
- self.panel = p
self.sizer = sizer
self.Fit()
sizer.Add(wx.StaticLine(panel), (sizer.GetRows()+1,sizer.GetCols()), (1,3), flag=wx.EXPAND)
sizer.SetRows(sizer.GetRows() + 2)
- def AddSetting(self, panel, name, setting, help = 'Help: TODO'):
+ def AddSetting(self, panel, name, settingName, help = 'Help: TODO'):
"Add a setting to the configuration panel"
sizer = panel.GetSizer()
sizer.Add(wx.StaticText(panel, -1, name), (sizer.GetRows(),sizer.GetCols()), flag=wx.ALIGN_CENTER_VERTICAL)
- ctrl = None
- if setting.__class__ is settings.FloatSpin:
- ctrl = wx.TextCtrl(panel, -1, str(setting.value))
- if setting.__class__ is settings.IntSpin:
- ctrl = wx.TextCtrl(panel, -1, str(setting.value))
- if setting.__class__ is settings.BooleanSetting:
- ctrl = wx.CheckBox(panel, -1, '')
- ctrl.SetValue(setting.value)
- if ctrl == None:
- print "No WX control for: " + str(setting), str(setting.__class__)
- else:
- ctrl.setting = setting
- self.controlList.append(ctrl)
- sizer.Add(ctrl, (sizer.GetRows(),sizer.GetCols()+1), flag=wx.ALIGN_BOTTOM|wx.EXPAND)
+ ctrl = wx.TextCtrl(panel, -1, settings.getSetting(settingName))
+ ctrl.settingName = settingName
+ self.controlList.append(ctrl)
+ sizer.Add(ctrl, (sizer.GetRows(),sizer.GetCols()+1), flag=wx.ALIGN_BOTTOM|wx.EXPAND)
helpButton = wx.Button(panel, -1, "?", style=wx.BU_EXACTFIT)
sizer.Add(helpButton, (sizer.GetRows(),sizer.GetCols()+2))
helpButton.SetToolTip(wx.ToolTip(help))
def updateProfileToControls(self):
"Update the configuration wx controls to show the new configuration settings"
- for pluginName in self.plugins.keys():
- settings.getReadRepository(self.plugins[pluginName])
settings.saveGlobalProfile(settings.getDefaultProfilePath())
for ctrl in self.controlList:
- if ctrl.setting.__class__ is settings.BooleanSetting:
- ctrl.SetValue(ctrl.setting.value)
- else:
- ctrl.SetValue(str(ctrl.setting.value))
+ ctrl.SetValue(settings.getSetting(ctrl.settingName))
def updateProfileFromControls(self):
"Update the configuration settings with values from the wx controls"
for ctrl in self.controlList:
- ctrl.setting.setValueToString(ctrl.GetValue())
- for pluginName in self.plugins.keys():
- settings.storeRepository(self.plugins[pluginName])
+ settings.putSetting(ctrl.settingName, ctrl.GetValue())
settings.saveGlobalProfile(settings.getDefaultProfilePath())
def OnQuit(self, e):
self.Close()
-
+
+ def OnClose(self, e):
+ self.updateProfileFromControls()
+ self.Destroy()
-import wx\r
import sys\r
import math\r
import threading\r
import re\r
\r
from wx.glcanvas import GLCanvas\r
+import wx\r
try:\r
from OpenGL.GLUT import *\r
from OpenGL.GLU import *\r
self.SetBackgroundColour(wx.SystemSettings.GetColour(wx.SYS_COLOUR_3DDKSHADOW))\r
self.SetMinSize((400,300))\r
\r
- self.glCanvas = GLCanvas(self, -1)\r
- wx.EVT_PAINT(self.glCanvas, self.OnPaint)\r
- wx.EVT_SIZE(self.glCanvas, self.OnSize)\r
- wx.EVT_ERASE_BACKGROUND(self.glCanvas, self.OnEraseBackground)\r
- wx.EVT_MOTION(self.glCanvas, self.OnMouseMotion)\r
+ self.glCanvas = PreviewGLCanvas(self)\r
self.init = 0\r
self.triangleMesh = None\r
- self.modelDisplayList = None\r
self.pathList = None\r
- self.yaw = 30\r
- self.pitch = 60\r
- self.zoom = 150\r
- self.renderTransparent = False\r
self.machineSize = Vector3(210, 210, 200)\r
self.machineCenter = Vector3(105, 105, 0)\r
\r
self.modelDirty = False\r
self.triangleMesh = fabmetheus_interpret.getCarving(self.modelFilename)\r
self.moveModel()\r
- self.Refresh()\r
+ self.glCanvas.Refresh()\r
\r
def getCodeInt(self, str, id):\r
m = re.search(id + '([^\s]+)', str)\r
print "Unknown G code:" + str(G)\r
self.pathList = pathList\r
self.triangleMesh = None\r
- self.Refresh()\r
+ self.glCanvas.Refresh()\r
\r
def OnConfigClick(self, e):\r
- self.renderTransparent = not self.renderTransparent\r
- self.Refresh()\r
+ self.glCanvas.renderTransparent = not self.glCanvas.renderTransparent\r
+ self.glCanvas.Refresh()\r
\r
def moveModel(self):\r
if self.triangleMesh == None:\r
v.y += self.machineCenter.y\r
self.triangleMesh.getMinimumZ()\r
self.modelDirty = True\r
- \r
+\r
+class PreviewGLCanvas(GLCanvas):\r
+ def __init__(self, parent):\r
+ GLCanvas.__init__(self, parent)\r
+ self.parent = parent\r
+ wx.EVT_PAINT(self, self.OnPaint)\r
+ wx.EVT_SIZE(self, self.OnSize)\r
+ wx.EVT_ERASE_BACKGROUND(self, self.OnEraseBackground)\r
+ wx.EVT_MOTION(self, self.OnMouseMotion)\r
+ self.yaw = 30\r
+ self.pitch = 60\r
+ self.zoom = 150\r
+ self.renderTransparent = False\r
+ self.modelDisplayList = None\r
+\r
def OnMouseMotion(self,e):\r
if e.Dragging() and e.LeftIsDown():\r
self.yaw += e.GetX() - self.oldX\r
dc.Clear()\r
dc.DrawText("No PyOpenGL installation found.\nNo preview window available.", 10, 10)\r
return\r
- self.glCanvas.SetCurrent()\r
+ self.SetCurrent()\r
self.InitGL()\r
self.OnDraw()\r
return\r
\r
def OnDraw(self):\r
+ machineSize = self.parent.machineSize\r
glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT)\r
\r
- glTranslate(-self.machineCenter.x, -self.machineCenter.y, 0)\r
+ glTranslate(-self.parent.machineCenter.x, -self.parent.machineCenter.y, 0)\r
\r
glColor3f(1,1,1)\r
glLineWidth(4)\r
glDisable(GL_LIGHTING)\r
glBegin(GL_LINE_LOOP)\r
glVertex3f(0, 0, 0)\r
- glVertex3f(self.machineSize.x, 0, 0)\r
- glVertex3f(self.machineSize.x, self.machineSize.y, 0)\r
- glVertex3f(0, self.machineSize.y, 0)\r
+ glVertex3f(machineSize.x, 0, 0)\r
+ glVertex3f(machineSize.x, machineSize.y, 0)\r
+ glVertex3f(0, machineSize.y, 0)\r
glEnd()\r
glLineWidth(2)\r
glBegin(GL_LINES)\r
- for i in xrange(0, self.machineSize.x, 10):\r
+ for i in xrange(0, machineSize.x, 10):\r
glVertex3f(i, 0, 0)\r
- glVertex3f(i, self.machineSize.y, 0)\r
- for i in xrange(0, self.machineSize.y, 10):\r
+ glVertex3f(i, machineSize.y, 0)\r
+ for i in xrange(0, machineSize.y, 10):\r
glVertex3f(0, i, 0)\r
- glVertex3f(self.machineSize.x, i, 0)\r
+ glVertex3f(machineSize.x, i, 0)\r
glEnd()\r
glLineWidth(1)\r
glBegin(GL_LINE_LOOP)\r
- glVertex3f(0, 0, self.machineSize.z)\r
- glVertex3f(self.machineSize.x, 0, self.machineSize.z)\r
- glVertex3f(self.machineSize.x, self.machineSize.y, self.machineSize.z)\r
- glVertex3f(0, self.machineSize.y, self.machineSize.z)\r
+ glVertex3f(0, 0, machineSize.z)\r
+ glVertex3f(machineSize.x, 0, machineSize.z)\r
+ glVertex3f(machineSize.x, machineSize.y, machineSize.z)\r
+ glVertex3f(0, machineSize.y, machineSize.z)\r
glEnd()\r
glBegin(GL_LINES)\r
glVertex3f(0, 0, 0)\r
- glVertex3f(0, 0, self.machineSize.z)\r
- glVertex3f(self.machineSize.x, 0, 0)\r
- glVertex3f(self.machineSize.x, 0, self.machineSize.z)\r
- glVertex3f(self.machineSize.x, self.machineSize.y, 0)\r
- glVertex3f(self.machineSize.x, self.machineSize.y, self.machineSize.z)\r
- glVertex3f(0, self.machineSize.y, 0)\r
- glVertex3f(0, self.machineSize.y, self.machineSize.z)\r
+ glVertex3f(0, 0, machineSize.z)\r
+ glVertex3f(machineSize.x, 0, 0)\r
+ glVertex3f(machineSize.x, 0, machineSize.z)\r
+ glVertex3f(machineSize.x, machineSize.y, 0)\r
+ glVertex3f(machineSize.x, machineSize.y, machineSize.z)\r
+ glVertex3f(0, machineSize.y, 0)\r
+ glVertex3f(0, machineSize.y, machineSize.z)\r
glEnd()\r
\r
- if self.pathList != None:\r
+ if self.parent.pathList != None:\r
for path in self.pathList:\r
if path['type'] == 'move':\r
glColor3f(0,0,1)\r
glVertex3f(v.x, v.y, v.z)\r
glEnd()\r
\r
- if self.triangleMesh != None:\r
+ if self.parent.triangleMesh != None:\r
if self.modelDisplayList == None:\r
self.modelDisplayList = glGenLists(1);\r
- if self.modelDirty:\r
- self.modelDirty = False\r
+ if self.parent.modelDirty:\r
+ self.parent.modelDirty = False\r
glNewList(self.modelDisplayList, GL_COMPILE)\r
glBegin(GL_TRIANGLES)\r
- for face in self.triangleMesh.faces:\r
- v1 = self.triangleMesh.vertexes[face.vertexIndexes[0]]\r
- v2 = self.triangleMesh.vertexes[face.vertexIndexes[1]]\r
- v3 = self.triangleMesh.vertexes[face.vertexIndexes[2]]\r
+ for face in self.parent.triangleMesh.faces:\r
+ v1 = self.parent.triangleMesh.vertexes[face.vertexIndexes[0]]\r
+ v2 = self.parent.triangleMesh.vertexes[face.vertexIndexes[1]]\r
+ v3 = self.parent.triangleMesh.vertexes[face.vertexIndexes[2]]\r
normal = (v2 - v1).cross(v3 - v1)\r
normal.normalize()\r
glNormal3f(normal.x, normal.y, normal.z)\r
glEnable(GL_LIGHTING)\r
glCallList(self.modelDisplayList)\r
\r
- self.glCanvas.SwapBuffers()\r
+ self.SwapBuffers()\r
return\r
\r
def InitGL(self):\r
# set viewing projection\r
glMatrixMode(GL_MODELVIEW)\r
glLoadIdentity()\r
- size = self.glCanvas.GetSize()\r
+ size = self.GetSize()\r
glViewport(0,0, size.GetWidth(), size.GetHeight())\r
\r
if self.renderTransparent:\r
glTranslate(0,0,-self.zoom)\r
glRotate(-self.pitch, 1,0,0)\r
glRotate(self.yaw, 0,0,1)\r
- if self.triangleMesh != None:\r
- glTranslate(0,0,-self.triangleMesh.getCarveCornerMaximum().z / 2)\r
+ if self.parent.triangleMesh != None:\r
+ glTranslate(0,0,-self.parent.triangleMesh.getCarveCornerMaximum().z / 2)\r
return\r
~ianmdlvl / cura.git / commitdiff