s.Add(wx.StaticLine(p), flag=wx.EXPAND|wx.TOP|wx.BOTTOM, border=10)
s.Add(wx.StaticText(p, -1, 'New in this version:'))
s.Add(wx.StaticText(p, -1, '* Updated drivers for Windows 8.1.'))
- s.Add(wx.StaticText(p, -1, '* Added better raft support with surface layers and an air-gap.'))
+ s.Add(wx.StaticText(p, -1, '* Added better raft support with surface layers and an air-gap. Special thanks to Gregoire Passault.'))
s.Add(wx.StaticText(p, -1, '* Improved outer surface quality on high detail prints.'))
s.Add(wx.StaticText(p, -1, '* Fixed bug with multiple machines and different start/end GCode.'))
s.Add(wx.StaticText(p, -1, '* Added initial support for BitsFromBytes machines.'))
setting('spiralize', False, bool, 'expert', 'Spiralize').setLabel(_("Spiralize the outer contour"), _("Spiralize is smoothing out the Z move of the outer edge. This will create a steady Z increase over the whole print. This feature turns a solid object into a single walled print with a solid bottom."))
#setting('bridge_speed', 100, int, 'expert', 'Bridge').setRange(0,100).setLabel(_("Bridge speed (%)"), _("Speed at which layers with bridges are printed, compared to normal printing speed."))
setting('brim_line_count', 20, int, 'expert', _('Brim')).setRange(1,100).setLabel(_("Brim line amount"), _("The amount of lines used for a brim, more lines means a larger brim which sticks better, but this also makes your effective print area smaller."))
-setting('raft_margin', 5, float, 'expert', _('Raft')).setRange(0).setLabel(_("Extra margin (mm)"), _("If the raft is enabled, this is the extra raft area around the object which is also rafted. Increasing this margin will create a stronger raft while using more material and leaving less area for your print."))
-setting('raft_line_spacing', 1.0, float, 'expert', _('Raft')).setRange(0).setLabel(_("Line spacing (mm)"), _("When you are using the raft this is the distance between the centerlines of the raft line."))
+setting('raft_margin', 5.0, float, 'expert', _('Raft')).setRange(0).setLabel(_("Extra margin (mm)"), _("If the raft is enabled, this is the extra raft area around the object which is also rafted. Increasing this margin will create a stronger raft while using more material and leaving less area for your print."))
+setting('raft_line_spacing', 3.0, float, 'expert', _('Raft')).setRange(0).setLabel(_("Line spacing (mm)"), _("When you are using the raft this is the distance between the centerlines of the raft line."))
setting('raft_base_thickness', 0.3, float, 'expert', _('Raft')).setRange(0).setLabel(_("Base thickness (mm)"), _("When you are using the raft this is the thickness of the base layer which is put down."))
-setting('raft_base_linewidth', 0.7, float, 'expert', _('Raft')).setRange(0).setLabel(_("Base line width (mm)"), _("When you are using the raft this is the width of the base layer lines which are put down."))
-setting('raft_interface_thickness', 0.2, float, 'expert', _('Raft')).setRange(0).setLabel(_("Interface thickness (mm)"), _("When you are using the raft this is the thickness of the interface layer which is put down."))
-setting('raft_interface_linewidth', 0.2, float, 'expert', _('Raft')).setRange(0).setLabel(_("Interface line width (mm)"), _("When you are using the raft this is the width of the interface layer lines which are put down."))
-setting('raft_airgap', 0.2, float, 'expert', _('Raft')).setRange(0).setLabel(_("Airgap"), _("Gap between the last layer of the raft and the first printing layer. A small gap of 0.2mm works wonders on PLA and makes the raft easy to remove."))
+setting('raft_base_linewidth', 1.0, float, 'expert', _('Raft')).setRange(0).setLabel(_("Base line width (mm)"), _("When you are using the raft this is the width of the base layer lines which are put down."))
+setting('raft_interface_thickness', 0.27, float, 'expert', _('Raft')).setRange(0).setLabel(_("Interface thickness (mm)"), _("When you are using the raft this is the thickness of the interface layer which is put down."))
+setting('raft_interface_linewidth', 0.4, float, 'expert', _('Raft')).setRange(0).setLabel(_("Interface line width (mm)"), _("When you are using the raft this is the width of the interface layer lines which are put down."))
+setting('raft_airgap', 0.22, float, 'expert', _('Raft')).setRange(0).setLabel(_("Airgap"), _("Gap between the last layer of the raft and the first printing layer. A small gap of 0.2mm works wonders on PLA and makes the raft easy to remove."))
setting('raft_surface_layers', 2, int, 'expert', _('Raft')).setRange(0).setLabel(_("Surface layers"), _("Amount of surface layers put on top of the raft, these are fully filled layers on which the model is printed."))
setting('fix_horrible_union_all_type_a', True, bool, 'expert', _('Fix horrible')).setLabel(_("Combine everything (Type-A)"), _("This expert option adds all parts of the model together. The result is usually that internal cavities disappear. Depending on the model this can be intended or not. Enabling this option is at your own risk. Type-A is dependent on the model normals and tries to keep some internal holes intact. Type-B ignores all internal holes and only keeps the outside shape per layer."))
setting('fix_horrible_union_all_type_b', False, bool, 'expert', _('Fix horrible')).setLabel(_("Combine everything (Type-B)"), _("This expert option adds all parts of the model together. The result is usually that internal cavities disappear. Depending on the model this can be intended or not. Enabling this option is at your own risk. Type-A is dependent on the model normals and tries to keep some internal holes intact. Type-B ignores all internal holes and only keeps the outside shape per layer."))
settings['raftBaseLinewidth'] = int(profile.getProfileSettingFloat('raft_base_linewidth') * 1000)
settings['raftInterfaceThickness'] = int(profile.getProfileSettingFloat('raft_interface_thickness') * 1000)
settings['raftInterfaceLinewidth'] = int(profile.getProfileSettingFloat('raft_interface_linewidth') * 1000)
+ settings['raftInterfaceLineSpacing'] = int(profile.getProfileSettingFloat('raft_interface_linewidth') * 1000 * 2.0)
settings['raftAirGap'] = int(profile.getProfileSettingFloat('raft_airgap') * 1000)
settings['raftBaseSpeed'] = int(profile.getProfileSettingFloat('bottom_layer_speed'))
- settings['raftFanSpeed'] = 0
- settings['raftSurfaceThickness'] = 200
+ settings['raftFanSpeed'] = 100
+ settings['raftSurfaceThickness'] = settings['raftInterfaceThickness']
settings['raftSurfaceLinewidth'] = int(profile.calculateEdgeWidth() * 1000)
- settings['raftSurfaceLineSpacing'] = int(profile.calculateEdgeWidth() * 1000)
+ settings['raftSurfaceLineSpacing'] = int(profile.calculateEdgeWidth() * 1000 * 0.9)
settings['raftSurfaceLayers'] = int(profile.getProfileSettingFloat('raft_surface_layers'))
settings['raftSurfaceSpeed'] = int(profile.getProfileSettingFloat('bottom_layer_speed'))
else:
~ianmdlvl / cura.git / commitdiff