def storedPercentSetting(name):
return lambda setting: float(getSetting(name, setting.value)) / 100
+def calculateEdgeWidth(setting):
+ wallThickness = float(getSetting('wall_thickness'))
+ nozzleSize = float(getSetting('nozzle_size'))
+
+ if wallThickness < nozzleSize:
+ return wallThickness
+
+ lineCount = int(wallThickness / nozzleSize)
+ lineWidth = wallThickness / lineCount
+ lineWidthAlt = wallThickness / (lineCount + 1)
+ if lineWidth > nozzleSize * 1.5:
+ return lineWidthAlt
+ return lineWidth
+
+def calculateShells(setting):
+ wallThickness = float(getSetting('wall_thickness'))
+ nozzleSize = float(getSetting('nozzle_size'))
+
+ if wallThickness < nozzleSize:
+ return wallThickness
+
+ lineCount = int(wallThickness / nozzleSize)
+ lineWidth = wallThickness / lineCount
+ lineWidthAlt = wallThickness / (lineCount + 1)
+ if lineWidth > nozzleSize * 1.5:
+ return lineCount
+ return lineCount - 1
+
+def calculateSolidLayerCount(setting):
+ layerHeight = float(getSetting('layer_height'))
+ solidThickness = float(getSetting('solid_layer_thickness'))
+ return int(solidThickness / layerHeight)
+
def getSkeinPyPyProfileInformation():
return {
'carve': {
'Add_Layer_Template_to_SVG': defaultSetting,
- 'Edge_Width_mm': defaultSetting,
+ 'Edge_Width_mm': calculateEdgeWidth,
'Extra_Decimal_Places_float': defaultSetting,
'Import_Coarseness_ratio': defaultSetting,
'Layer_Height_mm': storedSetting("layer_height"),
'Unproven_Mesh': defaultSetting,
'SVG_Viewer': defaultSetting,
},'scale': {
- 'Activate_Scale': defaultSetting,
+ 'Activate_Scale': "False",
'XY_Plane_Scale_ratio': defaultSetting,
'Z_Axis_Scale_ratio': defaultSetting,
'SVG_Viewer': defaultSetting,
'Activate_Widen': defaultSetting,
},'inset': {
'Add_Custom_Code_for_Temperature_Reading': defaultSetting,
- 'Infill_in_Direction_of_Bridge': defaultSetting,
+ 'Infill_in_Direction_of_Bridge': "True",
'Infill_Width_over_Thickness_ratio': defaultSetting,
'Loop_Order_Choice': defaultSetting,
'Overlap_Removal_Width_over_Perimeter_Width_ratio': defaultSetting,
'Activate_Fill': defaultSetting,
'Diaphragm_Period_layers': defaultSetting,
'Diaphragm_Thickness_layers': defaultSetting,
- 'Extra_Shells_on_Alternating_Solid_Layer_layers': defaultSetting,
- 'Extra_Shells_on_Base_layers': defaultSetting,
- 'Extra_Shells_on_Sparse_Layer_layers': defaultSetting,
+ 'Extra_Shells_on_Alternating_Solid_Layer_layers': calculateShells,
+ 'Extra_Shells_on_Base_layers': calculateShells,
+ 'Extra_Shells_on_Sparse_Layer_layers': calculateShells,
'Grid_Circle_Separation_over_Perimeter_Width_ratio': defaultSetting,
'Grid_Extra_Overlap_ratio': defaultSetting,
'Grid_Junction_Separation_Band_Height_layers': defaultSetting,
'Line': defaultSetting,
'Infill_Perimeter_Overlap_ratio': defaultSetting,
'Infill_Solidity_ratio': storedPercentSetting('fill_density'),
- 'Infill_Width': defaultSetting,
- 'Solid_Surface_Thickness_layers': defaultSetting,
+ 'Infill_Width': storedSetting("nozzle_size"),
+ 'Solid_Surface_Thickness_layers': calculateSolidLayerCount,
'Start_From_Choice': defaultSetting,
'Surrounding_Angle_degrees': defaultSetting,
'Thread_Sequence_Choice': defaultSetting,
},'multiply': {
'Activate_Multiply': "True",
- 'Center_X_mm': storedSetting("centerX"),
- 'Center_Y_mm': storedSetting("centerY"),
+ 'Center_X_mm': storedSetting("machine_center_x"),
+ 'Center_Y_mm': storedSetting("machine_center_y"),
'Number_of_Columns_integer': "1",
'Number_of_Rows_integer': "1",
'Reverse_Sequence_every_Odd_Layer': defaultSetting,
'Bridge_Cool_Celcius': defaultSetting,
'Cool_Type': defaultSetting,
'Maximum_Cool_Celcius': defaultSetting,
- 'Minimum_Layer_Time_seconds': defaultSetting,
+ 'Minimum_Layer_Time_seconds': storedSetting("cool_min_layer_time"),
'Minimum_Orbital_Radius_millimeters': defaultSetting,
'Name_of_Cool_End_File': defaultSetting,
'Name_of_Cool_Start_File': defaultSetting,
'Turn_Fan_On_at_Beginning': defaultSetting,
'Turn_Fan_Off_at_Ending': defaultSetting,
},'hop': {
- 'Activate_Hop': defaultSetting,
+ 'Activate_Hop': "False",
'Hop_Over_Layer_Thickness_ratio': defaultSetting,
'Minimum_Hop_Angle_degrees': defaultSetting,
},'wipe': {
- 'Activate_Wipe': defaultSetting,
+ 'Activate_Wipe': "False",
'Arrival_X_mm': defaultSetting,
'Arrival_Y_mm': defaultSetting,
'Arrival_Z_mm': defaultSetting,
'Wipe_Z_mm': defaultSetting,
'Wipe_Period_layers': defaultSetting,
},'oozebane': {
- 'Activate_Oozebane': defaultSetting,
+ 'Activate_Oozebane': "False",
'After_Startup_Distance_millimeters': defaultSetting,
'Early_Shutdown_Distance_millimeters': defaultSetting,
'Early_Startup_Distance_Constant_millimeters': defaultSetting,
'Minimum_Distance_for_Early_Shutdown_millimeters': defaultSetting,
'Slowdown_Startup_Steps_positive_integer': defaultSetting,
},'dwindle': {
- 'Activate_Dwindle': defaultSetting,
+ 'Activate_Dwindle': "False",
'End_Rate_Multiplier_ratio': defaultSetting,
'Pent_Up_Volume_cubic_millimeters': defaultSetting,
'Slowdown_Steps_positive_integer': defaultSetting,
'Slowdown_Volume_cubic_millimeters': defaultSetting,
},'splodge': {
- 'Activate_Splodge': defaultSetting,
+ 'Activate_Splodge': "False",
'Initial_Lift_over_Extra_Thickness_ratio': defaultSetting,
'Initial_Splodge_Feed_Rate_mm/s': defaultSetting,
'Operating_Splodge_Feed_Rate_mm/s': defaultSetting,
'Initial_Splodge_Quantity_Length_millimeters': defaultSetting,
'Operating_Lift_over_Extra_Thickness_ratio': defaultSetting,
},'home': {
- 'Activate_Home': defaultSetting,
+ 'Activate_Home': "False",
'Name_of_Home_File': defaultSetting,
},'lash': {
- 'Activate_Lash': defaultSetting,
+ 'Activate_Lash': "False",
'X_Backlash_mm': defaultSetting,
'Y_Backlash_mm': defaultSetting,
},'fillet': {
'Delay_milliseconds': defaultSetting,
'Maximum_Speed_ratio': defaultSetting,
},'dimension': {
- 'Activate_Dimension': defaultSetting,
- 'Absolute_Extrusion_Distance': defaultSetting,
- 'Relative_Extrusion_Distance': defaultSetting,
+ 'Activate_Dimension': "True",
+ 'Absolute_Extrusion_Distance': "True",
+ 'Relative_Extrusion_Distance': "False",
'Extruder_Retraction_Speed_mm/s': defaultSetting,
'Filament_Diameter_mm': defaultSetting,
'Filament_Packing_Density_ratio': defaultSetting,
'Restart_Extra_Distance_millimeters': defaultSetting,
},'alteration': {
'Activate_Alteration': defaultSetting,
- 'Name_of_End_File': defaultSetting,
- 'Name_of_Start_File': defaultSetting,
- 'Remove_Redundant_Mcode': defaultSetting,
+ 'Name_of_End_File': "start.gcode",
+ 'Name_of_Start_File': "end.gcode",
+ 'Remove_Redundant_Mcode': "True",
'Replace_Variable_with_Setting': defaultSetting,
},'export': {
- 'Activate_Export': defaultSetting,
+ 'Activate_Export': "True",
'Add_Descriptive_Extension': defaultSetting,
'Add_Export_Suffix': defaultSetting,
'Add_Profile_Extension': defaultSetting,
if not globalProfileParser.has_section(section):
globalProfileParser.add_section(section)
globalProfileParser.set(section, name, str(default))
+ print name + " not found in profile, so using default"
return default
return globalProfileParser.get(section, name)
import wx, os
-from fabmetheus_utilities import archive
from fabmetheus_utilities import settings
-from skeinforge_application.skeinforge_utilities import skeinforge_profile
from newui import preview3d
from newui import sliceProgessPanel
self.lastPath = ""
self.filename = None
self.progressPanelList = []
- self.controlList = []
- self.validators = []
+ self.settingControlList = []
nb = wx.Notebook(self)
- configPanel = wx.Panel(nb);
- nb.AddPage(configPanel, "Print config")
- leftConfigPanel = wx.Panel(configPanel)
- rightConfigPanel = wx.Panel(configPanel)
- sizer = wx.GridBagSizer(2, 2)
- leftConfigPanel.SetSizer(sizer)
- sizer = wx.GridBagSizer(2, 2)
- rightConfigPanel.SetSizer(sizer)
- sizer = wx.BoxSizer(wx.HORIZONTAL)
- configPanel.SetSizer(sizer)
- sizer.Add(leftConfigPanel)
- sizer.Add(rightConfigPanel)
+ (left, right) = self.CreateConfigTab(nb, 'Print config')
- self.AddTitle(leftConfigPanel, "Accuracy")
- c = self.AddSetting(leftConfigPanel, "Layer height (mm)", 'layer_height', '0.2', 'Layer height in millimeters.\n0.2 is a good value for quick prints.\n0.1 gives high quality prints.')
+ TitleRow(left, "Accuracy")
+ c = SettingRow(left, "Layer height (mm)", 'layer_height', '0.2', 'Layer height in millimeters.\n0.2 is a good value for quick prints.\n0.1 gives high quality prints.')
+ validators.validFloat(c, 0.0)
+ validators.warningAbove(c, 0.31, "Thicker layers then 0.3mm usually give bad results and are not recommended.")
+ c = SettingRow(left, "Wall thickness (mm)", 'wall_thickness', '0.8', 'Thickness of the walls.\nThis is used in combination with the nozzle size to define the number\nof perimeter lines and the thickness of those perimeter lines.')
validators.validFloat(c, 0.0)
- c = self.AddSetting(leftConfigPanel, "Wall thickness (mm)", 'wall_thickness', '0.8', 'Thickness of the walls.\nThis is used in combination with the nozzle size to define the number\nof perimeter lines and the thickness of those perimeter lines.')
+ validators.wallThicknessValidator(c)
+
+ TitleRow(left, "Fill")
+ c = SettingRow(left, "Bottom/Top thickness (mm)", 'solid_layer_thickness', '0.6', 'This controls the thickness of the bottom and top layers, the amount of solid layers put down is calculated by the layer thickness and this value.')
validators.validFloat(c, 0.0)
- self.AddTitle(leftConfigPanel, "Fill")
- #self.AddSetting(leftConfigPanel, "Solid layers", self.plugins['fill'].preferencesDict['Solid_Surface_Thickness_layers'])
- c = self.AddSetting(leftConfigPanel, "Fill Density (%)", 'fill_density', '20')
+ c = SettingRow(left, "Fill Density (%)", 'fill_density', '20', 'This controls how densily filled the insides of your print will be. For a solid part use 100%, for an empty part use 0%. A value around 20% is usually enough')
validators.validFloat(c, 0.0, 100.0)
- self.AddTitle(leftConfigPanel, "Skirt")
- c = self.AddSetting(leftConfigPanel, "Line count", 'skirt_line_count', '1')
+
+ TitleRow(left, "Skirt")
+ c = SettingRow(left, "Line count", 'skirt_line_count', '1')
validators.validInt(c, 0, 10)
- c = self.AddSetting(leftConfigPanel, "Start distance (mm)", 'skirt_gap', '6.0')
+ c = SettingRow(left, "Start distance (mm)", 'skirt_gap', '6.0')
validators.validFloat(c, 0.0)
- self.AddTitle(leftConfigPanel, "Cool")
- #self.AddSetting(configPanel, "Cool type", self.plugins['cool'].preferencesDict['Cool_Type'])
- #self.AddSetting(leftConfigPanel, "Minimal layer time", self.plugins['cool'].preferencesDict['Minimum_Layer_Time_seconds'])
- self.AddTitle(rightConfigPanel, "Retraction")
- #self.AddSetting(rightConfigPanel, "Speed (mm/s)", self.plugins['dimension'].preferencesDict['Extruder_Retraction_Speed_mm/s'])
- #self.AddSetting(rightConfigPanel, "Distance (mm)", self.plugins['dimension'].preferencesDict['Retraction_Distance_millimeters'])
- #self.AddSetting(rightConfigPanel, "Extra length on start (mm)", self.plugins['dimension'].preferencesDict['Restart_Extra_Distance_millimeters'])
- #self.AddSetting(rightConfigPanel, "Minimal travel (mm)", self.plugins['dimension'].preferencesDict['Minimum_Travel_for_Retraction_millimeters'])
- configPanel = wx.Panel(nb);
- nb.AddPage(configPanel, "Machine && Filament")
- leftConfigPanel = wx.Panel(configPanel)
- rightConfigPanel = wx.Panel(configPanel)
- sizer = wx.GridBagSizer(2, 2)
- leftConfigPanel.SetSizer(sizer)
- sizer = wx.GridBagSizer(2, 2)
- rightConfigPanel.SetSizer(sizer)
- sizer = wx.BoxSizer(wx.HORIZONTAL)
- configPanel.SetSizer(sizer)
- sizer.Add(leftConfigPanel)
- sizer.Add(rightConfigPanel)
+ TitleRow(right, "Cool")
+ #c = SettingRow(right, "Cool type", self.plugins['cool'].preferencesDict['Cool_Type'])
+ c = SettingRow(right, "Minimal layer time (sec)", 'cool_min_layer_time', '10', 'Minimum time spend in a layer, gives the layer time to cool down before the next layer is put on top. If the layer will be placed down too fast the printer will slow down to make sure it has spend atleast this amount of seconds printing this layer.')
+ validators.validFloat(c, 0.0)
+
+ (left, right) = self.CreateConfigTab(nb, 'Machine && Filament')
- self.AddTitle(leftConfigPanel, "Machine size")
- #self.AddSetting(leftConfigPanel, "Width (mm)", settings.IntSpin().getFromValue(10, "machine_width", None, 1000, 205))
- #self.AddSetting(leftConfigPanel, "Depth (mm)", settings.IntSpin().getFromValue(10, "machine_depth", None, 1000, 205))
- #self.AddSetting(leftConfigPanel, "Height (mm)", settings.IntSpin().getFromValue(10, "machine_height", None, 1000, 200))
+ TitleRow(left, "Machine size")
+ c = SettingRow(left, "Machine center X (mm)", 'machine_center_x', '100')
+ validators.validInt(c, 10)
+ c = SettingRow(left, "Machine center Y (mm)", 'machine_center_y', '100')
+ validators.validInt(c, 10)
+ #self.AddSetting(left, "Width (mm)", settings.IntSpin().getFromValue(10, "machine_width", None, 1000, 205))
+ #self.AddSetting(left, "Depth (mm)", settings.IntSpin().getFromValue(10, "machine_depth", None, 1000, 205))
+ #self.AddSetting(left, "Height (mm)", settings.IntSpin().getFromValue(10, "machine_height", None, 1000, 200))
+
+ TitleRow(left, "Machine nozzle")
+ c = SettingRow(left, "Nozzle size (mm)", 'nozzle_size', '0.4')
+ validators.validFloat(c, 0.1, 1.0)
- self.AddTitle(leftConfigPanel, "Machine nozzle")
- #self.AddSetting(leftConfigPanel, "Nozzle size (mm)", self.plugins['carve'].preferencesDict['Edge_Width_mm'])
+ TitleRow(left, "Retraction")
+ c = SettingRow(left, "Minimal travel (mm)", 'retraction_min_travel', '5.0')
+ validators.validFloat(c, 0.0)
+ c = SettingRow(left, "Speed (mm/s)", 'retraction_speed', '13.5')
+ validators.validFloat(c, 0.1)
+ c = SettingRow(left, "Distance (mm)", 'retraction_amount', '0.0')
+ validators.validFloat(c, 0.0)
+ c = SettingRow(left, "Extra length on start (mm)", 'retraction_extra', '0.0')
+ validators.validFloat(c, 0.0)
- self.AddTitle(leftConfigPanel, "Speed")
- #self.AddSetting(leftConfigPanel, "Print speed (mm/s)", self.plugins['speed'].preferencesDict['Feed_Rate_mm/s'])
- #self.AddSetting(leftConfigPanel, "Travel speed (mm/s)", self.plugins['speed'].preferencesDict['Travel_Feed_Rate_mm/s'])
- #self.AddSetting(leftConfigPanel, "Max Z speed (mm/z)", self.plugins['speed'].preferencesDict['Maximum_Z_Feed_Rate_mm/s'])
- #self.AddSetting(leftConfigPanel, "Bottom Layer Speed Ratio", self.plugins['speed'].preferencesDict['Object_First_Layer_Feed_Rate_Infill_Multiplier_ratio'])
+ TitleRow(right, "Speed")
+ c = SettingRow(right, "Print speed (mm/s)", 'print_speed', '50')
+ validators.validFloat(c, 1.0)
+ validators.warningAbove(c, 150.0, "It is highly unlikely that your machine can achieve a printing speed above 150mm/s")
+ c = SettingRow(right, "Travel speed (mm/s)", 'travel_speed', '150')
+ validators.validFloat(c, 1.0)
+ validators.warningAbove(c, 300.0, "It is highly unlikely that your machine can achieve a travel speed above 150mm/s")
+ c = SettingRow(right, "Max Z speed (mm/s)", 'max_z_speed', '1.0')
+ validators.validFloat(c, 0.5)
+ c = SettingRow(right, "Bottom layer speed", 'bottom_layer_speed', '25')
+ validators.validFloat(c, 0.0)
- self.AddTitle(rightConfigPanel, "Filament")
- #self.AddSetting(rightConfigPanel, "Diameter (mm)", self.plugins['dimension'].preferencesDict['Filament_Diameter_mm'])
- #self.AddSetting(rightConfigPanel, "Packing Density", self.plugins['dimension'].preferencesDict['Filament_Packing_Density_ratio'])
+ TitleRow(right, "Filament")
+ c = SettingRow(right, "Diameter (mm)", 'filament_diameter', '2.98', 'Diameter of your filament, as accurately as possible.\nIf you cannot measure this value you will have to callibrate it, a higher number means less extrusion, a smaller number generates more extrusion.')
+ validators.validFloat(c, 1.0)
+ c = SettingRow(right, "Packing Density", 'filament_density', '1.00', 'Packing density of your filament. This should be 1.00 for PLA and 0.85 for ABS')
+ validators.validFloat(c, 0.5, 1.5)
nb.AddPage(alterationPanel.alterationPanel(nb), "Start/End-GCode")
self.popup.sizer.Add(self.popup.text, flag=wx.EXPAND)
self.popup.SetSizer(self.popup.sizer)
+
+ self.updateProfileToControls()
+
self.Fit()
self.Centre()
self.Show(True)
- def AddTitle(self, panel, name):
- "Add a title row to the configuration panel"
- sizer = panel.GetSizer()
- title = wx.StaticText(panel, -1, name)
- title.SetFont(wx.Font(8, wx.FONTFAMILY_DEFAULT, wx.NORMAL, wx.FONTWEIGHT_BOLD))
- sizer.Add(title, (sizer.GetRows(),sizer.GetCols()), (1,3), flag=wx.EXPAND)
- sizer.Add(wx.StaticLine(panel), (sizer.GetRows()+1,sizer.GetCols()), (1,3), flag=wx.EXPAND)
- sizer.SetRows(sizer.GetRows() + 2)
-
- def AddSetting(self, panel, name, settingName, default = '', help = 'Help: TODO'):
- "Add a setting to the configuration panel"
- sizer = panel.GetSizer()
- sizer.Add(wx.StaticText(panel, -1, name), (sizer.GetRows(),sizer.GetCols()), flag=wx.ALIGN_CENTER_VERTICAL)
- ctrl = wx.TextCtrl(panel, -1, settings.getSetting(settingName, default))
- ctrl.settingName = settingName
- ctrl.main = self
- self.Bind(wx.EVT_TEXT, self.OnSettingTextChange, ctrl)
- self.controlList.append(ctrl)
- sizer.Add(ctrl, (sizer.GetRows(),sizer.GetCols()+1), flag=wx.ALIGN_BOTTOM|wx.EXPAND)
- helpButton = wx.Button(panel, -1, "?", style=wx.BU_EXACTFIT)
- sizer.Add(helpButton, (sizer.GetRows(),sizer.GetCols()+2))
- helpButton.SetToolTip(wx.ToolTip(help))
- sizer.SetRows(sizer.GetRows()+1)
-
- ctrl.Bind(wx.EVT_ENTER_WINDOW, lambda e: self.OnPopupDisplay(ctrl, help))
- ctrl.Bind(wx.EVT_LEAVE_WINDOW, self.OnPopupHide)
-
- return ctrl
+ def CreateConfigTab(self, nb, name):
+ configPanel = wx.Panel(nb);
+ nb.AddPage(configPanel, name)
+ leftConfigPanel = wx.Panel(configPanel)
+ rightConfigPanel = wx.Panel(configPanel)
+ sizer = wx.GridBagSizer(2, 2)
+ leftConfigPanel.SetSizer(sizer)
+ sizer = wx.GridBagSizer(2, 2)
+ rightConfigPanel.SetSizer(sizer)
+ sizer = wx.BoxSizer(wx.HORIZONTAL)
+ configPanel.SetSizer(sizer)
+ sizer.Add(leftConfigPanel)
+ sizer.Add(rightConfigPanel)
+ leftConfigPanel.main = self
+ rightConfigPanel.main = self
+ return leftConfigPanel, rightConfigPanel
- def OnPopupDisplay(self, e, helpText):
- x, y = e.ClientToScreenXY(0, 0)
- sx, sy = e.GetSizeTuple()
- self.popup.text.SetLabel(helpText)
+ def OnPopupDisplay(self, setting):
+ x, y = setting.ctrl.ClientToScreenXY(0, 0)
+ sx, sy = setting.ctrl.GetSizeTuple()
+ if setting.validationMsg != '':
+ self.popup.text.SetLabel(setting.validationMsg + '\n\n' + setting.helpText)
+ else:
+ self.popup.text.SetLabel(setting.helpText)
+ self.popup.text.Wrap(350)
self.popup.SetPosition((x, y+sy))
self.popup.Fit()
self.popup.Show(True)
if res == validators.ERROR:
validator.ctrl.SetBackgroundColour('Red')
elif res == validators.WARNING:
- validator.ctrl.SetBackgroundColour('Yellow')
+ validator.ctrl.SetBackgroundColour('Orange')
else:
validator.ctrl.SetBackgroundColour(wx.NullColor)
profileFile = dlg.GetPath()
self.lastPath = os.path.split(profileFile)[0]
settings.saveGlobalProfile(profileFile)
- self.updateProfileFromControls()
dlg.Destroy()
def OnLoadSTL(self, e):
def OnSlice(self, e):
if self.filename == None:
return
- self.updateProfileFromControls()
+ settings.saveGlobalProfile(settings.getDefaultProfilePath())
#Create a progress panel and add it to the window. The progress panel will start the Skein operation.
- spp = sliceProgessPanel.sliceProgessPanel(self, self.panel, self.filename)
+ spp = sliceProgessPanel.sliceProgessPanel(self, self, self.filename)
self.sizer.Add(spp, (len(self.progressPanelList)+2,0), span=(1,4), flag=wx.EXPAND)
self.sizer.Layout()
newSize = self.GetSize();
def updateProfileToControls(self):
"Update the configuration wx controls to show the new configuration settings"
- settings.saveGlobalProfile(settings.getDefaultProfilePath())
- for ctrl in self.controlList:
- ctrl.SetValue(settings.getSetting(ctrl.settingName))
+ for setting in self.settingControlList:
+ setting.SetValue(settings.getSetting(setting.configName))
- def updateProfileFromControls(self):
- "Update the configuration settings with values from the wx controls"
- for ctrl in self.controlList:
- settings.putSetting(ctrl.settingName, ctrl.GetValue())
- settings.saveGlobalProfile(settings.getDefaultProfilePath())
-
def OnQuit(self, e):
self.Close()
def OnClose(self, e):
- self.updateProfileFromControls()
+ settings.saveGlobalProfile(settings.getDefaultProfilePath())
self.Destroy()
+
+class TitleRow():
+ def __init__(self, panel, name):
+ "Add a title row to the configuration panel"
+ sizer = panel.GetSizer()
+ self.title = wx.StaticText(panel, -1, name)
+ self.title.SetFont(wx.Font(8, wx.FONTFAMILY_DEFAULT, wx.NORMAL, wx.FONTWEIGHT_BOLD))
+ sizer.Add(self.title, (sizer.GetRows(),sizer.GetCols()), (1,3), flag=wx.EXPAND)
+ sizer.Add(wx.StaticLine(panel), (sizer.GetRows()+1,sizer.GetCols()), (1,3), flag=wx.EXPAND)
+ sizer.SetRows(sizer.GetRows() + 2)
+
+class SettingRow():
+ def __init__(self, panel, label, configName, defaultValue = '', helpText = 'Help: TODO'):
+ "Add a setting to the configuration panel"
+ sizer = panel.GetSizer()
+ x = sizer.GetRows()
+ y = sizer.GetCols()
+
+ self.validators = []
+ self.validationMsg = ''
+ self.helpText = helpText
+ self.configName = configName
+
+ self.label = wx.StaticText(panel, -1, label)
+ self.ctrl = wx.TextCtrl(panel, -1, settings.getSetting(configName, defaultValue))
+ #self.helpButton = wx.Button(panel, -1, "?", style=wx.BU_EXACTFIT)
+ #self.helpButton.SetToolTip(wx.ToolTip(help))
+
+ self.ctrl.Bind(wx.EVT_TEXT, self.OnSettingTextChange)
+ self.ctrl.Bind(wx.EVT_ENTER_WINDOW, lambda e: panel.main.OnPopupDisplay(self))
+ self.ctrl.Bind(wx.EVT_LEAVE_WINDOW, panel.main.OnPopupHide)
+
+ panel.main.settingControlList.append(self)
+
+ sizer.Add(self.label, (x,y), flag=wx.ALIGN_CENTER_VERTICAL)
+ sizer.Add(self.ctrl, (x,y+1), flag=wx.ALIGN_BOTTOM|wx.EXPAND)
+ #sizer.Add(helpButton, (x,y+2))
+ sizer.SetRows(x+1)
+
+ def OnSettingTextChange(self, e):
+ result = validators.SUCCESS
+ msgs = []
+ for validator in self.validators:
+ res, err = validator.validate()
+ if res == validators.ERROR:
+ result = res
+ elif res == validators.WARNING and result != validators.ERROR:
+ result = res
+ if res != validators.SUCCESS:
+ print err
+ msgs.append(err)
+ if result == validators.ERROR:
+ self.ctrl.SetBackgroundColour('Red')
+ elif result == validators.WARNING:
+ self.ctrl.SetBackgroundColour('Yellow')
+ else:
+ self.ctrl.SetBackgroundColour(wx.NullColour)
+ settings.putSetting(self.configName, self.GetValue())
+ self.validationMsg = '\n'.join(msgs)
+
+ def GetValue(self):
+ return self.ctrl.GetValue()
+
+ def SetValue(self, value):
+ self.ctrl.SetValue(value)
+
~ianmdlvl / cura.git / commitdiff