#define MSG_DISABLE_STEPPERS " Disable Steppers"
#define MSG_AUTO_HOME " Auto Home"
#define MSG_SET_ORIGIN " Set Origin"
- #define MSG_PREHEAT " Preheat"
#define MSG_COOLDOWN " Cooldown"
#define MSG_EXTRUDE " Extrude"
- #define MSG_MOVE_AXIS " Move Axis \x7E"
+ #define MSG_PREHEAT_PLA " Preheat PLA"
+ #define MSG_PREHEAT_ABS " Preheat ABS"
+ #define MSG_MOVE_AXIS " Move Axis \x7E"
#define MSG_SPEED " Speed:"
#define MSG_NOZZLE " \002Nozzle:"
#define MSG_BED " \002Bed:"
// LCD Menu Messages
- #define WELCOME_MSG "RepRap bereit"
- #define MSG_SD_INSERTED "SDKarte bereit"
- #define MSG_SD_REMOVED "SDKarte entfernt"
+ #define WELCOME_MSG "UltiMARLIN Ready."
+
+ #define MSG_SD_INSERTED "Card inserted"
+ #define MSG_SD_REMOVED "Card removed"
#define MSG_MAIN " Main \003"
#define MSG_AUTOSTART " Autostart"
- #define MSG_DISABLE_STEPPERS " Disable Steppers"
- #define MSG_AUTO_HOME " Auto Home"
- #define MSG_SET_ORIGIN " Set Origin"
- #define MSG_PREHEAT " Preheat"
- #define MSG_COOLDOWN " Cooldown"
- #define MSG_EXTRUDE " Extrude"
+ #define MSG_DISABLE_STEPPERS " Stepper abschalten"
+ #define MSG_AUTO_HOME " Auto Heim"
+ #define MSG_SET_ORIGIN " Position setzen"
+ #define MSG_PREHEAT_PLA " Aufheizen PLA"
+ #define MSG_PREHEAT_ABS " Aufheizen ABS"
+ #define MSG_COOLDOWN " Abkuehlen"
- #define MSG_EXTRUDE " Extrudiren"
+ #define MSG_MOVE_AXIS " Move Axis \x7E"
- #define MSG_SPEED " Speed:"
- #define MSG_NOZZLE " \002Nozzle:"
- #define MSG_BED " \002Bed:"
- #define MSG_FAN_SPEED " Fan speed:"
- #define MSG_FLOW " Flow:"
- #define MSG_CONTROL " Control \003"
+ #define MSG_MOVE_AXIS " Achsen verfahren \x7E"
+ #define MSG_SPEED " Geschw:"
+ #define MSG_NOZZLE " \002Duese:"
+ #define MSG_BED " \002Bett:"
+ #define MSG_FAN_SPEED " Luefter geschw.:"
+ #define MSG_FLOW " Fluss:"
+ #define MSG_CONTROL " Kontrolle \003"
#define MSG_MIN " \002 Min:"
#define MSG_MAX " \002 Max:"
- #define MSG_FACTOR " \002 Fact:"
- #define MSG_AUTOTEMP " Autotemp:"
- #define MSG_ON "On "
- #define MSG_OFF "Off"
+ #define MSG_FACTOR " \002 Faktor:"
+ #define MSG_AUTOTEMP " AutoTemp:"
+ #define MSG_ON "Ein "
+ #define MSG_OFF "Aus "
#define MSG_PID_P " PID-P: "
#define MSG_PID_I " PID-I: "
#define MSG_PID_D " PID-D: "
#define MSG_ZSTEPS " Zsteps/mm:"
#define MSG_ESTEPS " Esteps/mm:"
#define MSG_MAIN_WIDE " Main \003"
- #define MSG_TEMPERATURE_WIDE " Temperature \x7E"
+ #define MSG_TEMPERATURE_WIDE " Temperatur \x7E"
#define MSG_MOTION_WIDE " Motion \x7E"
- #define MSG_STORE_EPROM " Store EPROM"
- #define MSG_LOAD_EPROM " Load EPROM"
- #define MSG_RESTORE_FAILSAFE " Restore Failsafe"
+ #define MSG_STORE_EPROM " EPROM speichern"
+ #define MSG_LOAD_EPROM " EPROM laden"
+ #define MSG_RESTORE_FAILSAFE " Standard Konfig."
#define MSG_REFRESH "\004Refresh"
- #define MSG_WATCH " Watch \003"
+ #define MSG_WATCH " Beobachten \003"
#define MSG_PREPARE " Prepare \x7E"
- #define MSG_CONTROL_ARROW " Kontrolle \x7E"
+ #define MSG_PREPARE_ALT " Prepare \003"
- #define MSG_CONTROL_ARROW " Control \x7E"
#define MSG_TUNE " Tune \x7E"
- #define MSG_STOP_PRINT " Stop Print \x7E"
- #define MSG_CARD_MENU " Card Menu \x7E"
- #define MSG_NO_CARD " No Card"
- #define MSG_SERIAL_ERROR_MENU_STRUCTURE "Something is wrong in the MenuStructure."
+ #define MSG_STOP_PRINT " Druck stoppen \x7E"
+ #define MSG_CARD_MENU " SDKarten Menue \x7E"
+ #define MSG_NO_CARD " Keine SDKarte"
+ #define MSG_SERIAL_ERROR_MENU_STRUCTURE "Fehler in der Menuestruktur."
+ #define MSG_DWELL "DWELL..."
+ #define MSG_NO_MOVE "No move."
+ #define MSG_PART_RELEASE "Partial Release"
+ #define MSG_KILLED "KILLED. "
+ #define MSG_PREHEAT_PLA " Preheat PLA"
+ #define MSG_PREHEAT_ABS " Preheat ABS"
-#endif
-#if LANGUAGE_CHOICE == 5
-// LCD Menu Messages
+// Serial Console Messages
- #define WELCOME_MSG "RepRap Ready."
- #define MSG_SD_INSERTED "Card Ready"
- #define MSG_SD_REMOVED "Card Initiate"
- #define MSG_MAIN " Main \003"
- #define MSG_AUTOSTART " Autostart"
- #define MSG_DISABLE_STEPPERS " Disable Steppers"
- #define MSG_AUTO_HOME " Auto Home"
- #define MSG_SET_ORIGIN " Set Origin"
- #define MSG_PREHEAT_PLA " Preheat PLA"
- #define MSG_PREHEAT_ABS " Preheat ABS"
- #define MSG_COOLDOWN " Cooldown"
- #define MSG_EXTRUDE " Extrude"
- #define MSG_MOVE_AXIS " Move Axis \x7E"
- #define MSG_SPEED " Speed:"
- #define MSG_NOZZLE " \002Nozzle:"
- #define MSG_BED " \002Bed:"
- #define MSG_FAN_SPEED " Fan speed:"
- #define MSG_FLOW " Flow:"
- #define MSG_CONTROL " Control \003"
- #define MSG_MIN " \002 Min:"
- #define MSG_MAX " \002 Max:"
- #define MSG_FACTOR " \002 Fact:"
- #define MSG_AUTOTEMP " Autotemp:"
- #define MSG_ON "On "
- #define MSG_OFF "Off"
- #define MSG_PID_P " PID-P: "
- #define MSG_PID_I " PID-I: "
- #define MSG_PID_D " PID-D: "
- #define MSG_PID_C " PID-C: "
- #define MSG_ACC " Acc:"
- #define MSG_VXY_JERK " Vxy-jerk: "
- #define MSG_VMAX " Vmax "
- #define MSG_X "x:"
- #define MSG_Y "y:"
- #define MSG_Z "z:"
- #define MSG_E "e:"
- #define MSG_VMIN " Vmin:"
- #define MSG_VTRAV_MIN " VTrav min:"
- #define MSG_AMAX " Amax "
- #define MSG_A_RETRACT " A-retract:"
- #define MSG_XSTEPS " Xsteps/mm:"
- #define MSG_YSTEPS " Ysteps/mm:"
- #define MSG_ZSTEPS " Zsteps/mm:"
- #define MSG_ESTEPS " Esteps/mm:"
- #define MSG_MAIN_WIDE " Main \003"
- #define MSG_TEMPERATURE_WIDE " Temperature \x7E"
- #define MSG_MOTION_WIDE " Motion \x7E"
- #define MSG_STORE_EPROM " Store EPROM"
- #define MSG_LOAD_EPROM " Load EPROM"
- #define MSG_RESTORE_FAILSAFE " Restore Failsafe"
- #define MSG_REFRESH "\004Refresh"
- #define MSG_WATCH " Watch \003"
- #define MSG_PREPARE " Prepare \x7E"
- #define MSG_CONTROL_ARROW " Control \x7E"
- #define MSG_TUNE " Tune \x7E"
- #define MSG_STOP_PRINT " Stop Print \x7E"
- #define MSG_CARD_MENU " Card Menu \x7E"
- #define MSG_NO_CARD " No Card"
- #define MSG_SERIAL_ERROR_MENU_STRUCTURE "Something is wrong in the MenuStructure."
+ #define MSG_Enqueing "enqueing \""
+ #define MSG_POWERUP "PowerUp"
+ #define MSG_EXTERNAL_RESET " External Reset"
+ #define MSG_BROWNOUT_RESET " Brown out Reset"
+ #define MSG_WATCHDOG_RESET " Watchdog Reset"
+ #define MSG_SOFTWARE_RESET " Software Reset"
+ #define MSG_MARLIN "Marlin: "
+ #define MSG_AUTHOR " | Author: "
+ #define MSG_CONFIGURATION_VER " Last Updated: "
+ #define MSG_FREE_MEMORY " Free Memory: "
+ #define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
+ #define MSG_OK "ok"
+ #define MSG_FILE_SAVED "Done saving file."
+ #define MSG_ERR_LINE_NO "Line Number is not Last Line Number+1, Last Line:"
+ #define MSG_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line:"
+ #define MSG_ERR_NO_CHECKSUM "No Checksum with line number, Last Line:"
+ #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No Line Number with checksum, Last Line:"
+ #define MSG_FILE_PRINTED "Done printing file"
+ #define MSG_BEGIN_FILE_LIST "Begin file list"
+ #define MSG_END_FILE_LIST "End file list"
+ #define MSG_M104_INVALID_EXTRUDER "M104 Invalid extruder "
+ #define MSG_M105_INVALID_EXTRUDER "M105 Invalid extruder "
+ #define MSG_ERR_NO_THERMISTORS "No thermistors - no temp"
+ #define MSG_M109_INVALID_EXTRUDER "M109 Invalid extruder "
+ #define MSG_HEATING "Heating..."
+ #define MSG_HEATING_COMPLETE "Heating done."
+ #define MSG_BED_HEATING "Bed Heating."
+ #define MSG_BED_DONE "Bed done."
+ #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:http://www.mendel-parts.com PROTOCOL_VERSION:1.0 MACHINE_TYPE:Mendel EXTRUDER_COUNT:1\n"
+ #define MSG_COUNT_X " Count X:"
+ #define MSG_ERR_KILLED "Printer halted. kill() called !!"
+ #define MSG_RESEND "Resend:"
+ #define MSG_UNKNOWN_COMMAND "Unknown command:\""
+ #define MSG_ACTIVE_EXTRUDER "Active Extruder: "
+ #define MSG_INVALID_EXTRUDER "Invalid extruder"
+ #define MSG_X_MIN "x_min:"
+ #define MSG_X_MAX "x_max:"
+ #define MSG_Y_MIN "y_min:"
+ #define MSG_Y_MAX "y_max:"
+ #define MSG_Z_MIN "z_min:"
+ #define MSG_Z_MAX "z_max:"
-#endif
+ #define MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir"
+ #define MSG_SD_INIT_FAIL "SD init fail"
+ #define MSG_SD_VOL_INIT_FAIL "volume.init failed"
+ #define MSG_SD_OPENROOT_FAIL "openRoot failed"
+ #define MSG_SD_CARD_OK "SD card ok"
+ #define MSG_SD_WORKDIR_FAIL "workDir open failed"
+ #define MSG_SD_OPEN_FILE_FAIL "open failed, File: "
+ #define MSG_SD_FILE_OPENED "File opened:"
+ #define MSG_SD_SIZE " Size:"
+ #define MSG_SD_FILE_SELECTED "File selected"
+ #define MSG_SD_WRITE_TO_FILE "Writing to file: "
+ #define MSG_SD_PRINTING_BYTE "SD printing byte "
+ #define MSG_SD_NOT_PRINTING "Not SD printing"
+ #define MSG_SD_ERR_WRITE_TO_FILE "error writing to file"
+ #define MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir:"
+#endif
#endif // ifndef LANGUAGE_H
~ianmdlvl / marlin.git / commitdiff