Add improve 100% filled objects by setting a large up/down skin.

diff --git a/Cura/util/sliceEngine.py b/Cura/util/sliceEngine.py
index 1b3efc1aa31fdc979e9a530dcd4e7d652bd1dd0e..8944b057af500109d285cbfda646034a0d5982d8 100644 (file)
--- a/Cura/util/sliceEngine.py
+++ b/Cura/util/sliceEngine.py
@@ -243,7 +243,6 @@ class Slicer(object):
                        'insetCount': int(profile.calculateLineCount()),
                        'downSkinCount': int(profile.calculateSolidLayerCount()) if profile.getProfileSetting('solid_bottom') == 'True' else 0,
                        'upSkinCount': int(profile.calculateSolidLayerCount()) if profile.getProfileSetting('solid_top') == 'True' else 0,
-                       'sparseInfillLineDistance': int(100 * profile.calculateEdgeWidth() * 1000 / profile.getProfileSettingFloat('fill_density')) if profile.getProfileSettingFloat('fill_density') > 0 else -1,
                        'infillOverlap': int(profile.getProfileSettingFloat('fill_overlap')),
                        'initialSpeedupLayers': int(4),
                        'initialLayerSpeed': int(profile.getProfileSettingFloat('bottom_layer_speed')),
@@ -281,6 +280,16 @@ class Slicer(object):
                        'extruderOffset[3].Y': int(profile.getMachineSettingFloat('extruder_offset_y3') * 1000),
                        'fixHorrible': 0,
                }
+               if profile.getProfileSettingFloat('fill_density') == 0:
+                       settings['sparseInfillLineDistance'] = -1
+               elif profile.getProfileSettingFloat('fill_density') == 100:
+                       settings['sparseInfillLineDistance'] = settings['extrusionWidth']
+                       #Set the up/down skins height to 10000 if we want a 100% filled object.
+                       # This gives better results then normal 100% infill as the sparse and up/down skin have some overlap.
+                       settings['downSkinCount'] = 10000
+                       settings['upSkinCount'] = 10000
+               else:
+                       settings['sparseInfillLineDistance'] = int(100 * profile.calculateEdgeWidth() * 1000 / profile.getProfileSettingFloat('fill_density'))
                if profile.getProfileSetting('platform_adhesion') == 'Brim':
                        settings['skirtDistance'] = 0
                        settings['skirtLineCount'] = int(profile.getProfileSettingFloat('brim_line_count'))