Add BFB test profile.

diff --git a/resources/machine_profiles/BFB.ini b/resources/machine_profiles/BFB.ini
new file mode 100644 (file)
index 0000000..bf6e8a9
--- /dev/null
+++ b/resources/machine_profiles/BFB.ini
@@ -0,0 +1,62 @@
+[machine]\r
+machine_name = BFB_Test\r
+machine_type = BFB\r
+machine_width = 100\r
+machine_depth = 100\r
+machine_height = 100\r
+machine_center_is_zero = False\r
+has_heated_bed = False\r
+gcode_flavor = BFB\r
+extruder_amount = 1\r
+\r
+[profile]\r
+nozzle_size = 0.5\r
+layer_height = 0.25\r
+filament_diameter = 1.7\r
+print_speed = 25\r
+fill_density = 10\r
+print_speed = 40\r
+print_temperature = 200\r
+travel_speed = 150\r
+retraction_amount = .05\r
+bottom_thickness = .5\r
+travel_speed = 50\r
+bottom_layer_speed = 25\r
+infill_speed = 30\r
+inset0_speed = 25\r
+insetx_speed = 20\r
+\r
+[alterations]\r
+start.gcode = ^Firmware:V1.07\r\r
+       ^Checksum: NO\r\r
+       G21\r\r
+       G90\r\r
+       # Select Extruder 1\r\r
+       M104 S{print_temperature}\r\r
+       M542\r\r
+       M551 P2000 S100\r\r
+       M543\r\r
+       M227 P163 S230\r\r
+       M228 P0 S163\r
+end.gcode = ;End GCode\r
+       M103\r
+       M104 S0\r
+       M204 S0\r
+       M304 S0\r
+start2.gcode = ^Firmware:V1.07\r\r
+       ^Checksum: NO\r\r
+       G21\r\r
+       G90\r\r
+       # Select Extruder 1\r\r
+       M104 S{print_temperature}\r\r
+       M204 S{print_temperature2}\r\r
+       M542\r\r
+       M551 P2000 S100\r\r
+       M543\r\r
+       M227 P163 S230\r\r
+       M228 P0 S163\r
+end2.gcode = ;End GCode\r
+       M103\r
+       M104 S0\r
+       M204 S0\r
+       M304 S0\r