HOMEAXIS: make into a function

Replace the large macro HOMEAXIS with a function.  This avoids the
compiler generating three copies of largely identical code.  The
saving is 704 bytes of program memory.

Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>

diff --git a/Marlin/Marlin.pde b/Marlin/Marlin.pde
index a8547143a2ec0c388f48de34872a930bd86755a9..38ad8f6b2ef8bdff01c1c176822b00506c5cad46 100644 (file)
--- a/Marlin/Marlin.pde
+++ b/Marlin/Marlin.pde
@@ -559,6 +559,9 @@ static const PROGMEM type array##_P[3] = { X_##CONFIG, Y_##CONFIG, Z_##CONFIG };
 XYZ_CONSTS_FROM_CONFIG(float, base_min_pos,    MIN_POS);
 XYZ_CONSTS_FROM_CONFIG(float, base_max_pos,    MAX_POS);
 XYZ_CONSTS_FROM_CONFIG(float, base_home_pos,   HOME_POS);
+XYZ_CONSTS_FROM_CONFIG(float, max_length,      MAX_LENGTH);
+XYZ_CONSTS_FROM_CONFIG(float, home_retract_mm, HOME_RETRACT_MM);
+XYZ_CONSTS_FROM_CONFIG(signed char, home_dir,  HOME_DIR);
 
 static void axis_is_at_home(int axis) {
   current_position[axis] = XYZ_CONFIG(float, base_home_pos,axis) + add_homeing[axis];
@@ -566,32 +569,41 @@ static void axis_is_at_home(int axis) {
   max_pos[axis] = XYZ_CONFIG(float, base_max_pos, axis) + add_homeing[axis];
 }
 
-#define HOMEAXIS(LETTER) \
-  if ((LETTER##_MIN_PIN > -1 && LETTER##_HOME_DIR==-1) || (LETTER##_MAX_PIN > -1 && LETTER##_HOME_DIR==1))\
-    { \
-    current_position[LETTER##_AXIS] = 0; \
-    plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]); \
-    destination[LETTER##_AXIS] = 1.5 * LETTER##_MAX_LENGTH * LETTER##_HOME_DIR; \
-    feedrate = homing_feedrate[LETTER##_AXIS]; \
-    plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate/60, active_extruder); \
-    st_synchronize();\
-    \
-    current_position[LETTER##_AXIS] = 0;\
-    plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]);\
-    destination[LETTER##_AXIS] = -LETTER##_HOME_RETRACT_MM * LETTER##_HOME_DIR;\
-    plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate/60, active_extruder); \
-    st_synchronize();\
-    \
-    destination[LETTER##_AXIS] = 2*LETTER##_HOME_RETRACT_MM * LETTER##_HOME_DIR;\
-    feedrate = homing_feedrate[LETTER##_AXIS]/2 ;  \
-    plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate/60, active_extruder); \
-    st_synchronize();\
-    \
-    axis_is_at_home(LETTER##_AXIS);                                    \
-    destination[LETTER##_AXIS] = current_position[LETTER##_AXIS]; \
-    feedrate = 0.0;\
-    endstops_hit_on_purpose();\
+static void homeaxis(int axis) {
+#define HOMEAXIS_DO_BIT(LETTER) \
+  ((LETTER##_MIN_PIN > -1 && LETTER##_HOME_DIR==-1) || (LETTER##_MAX_PIN > -1 && LETTER##_HOME_DIR==1) ? 1 << LETTER##_AXIS : 0)
+
+  static PROGMEM const unsigned char doaxis =
+    HOMEAXIS_DO_BIT(X) | 
+    HOMEAXIS_DO_BIT(Y) |
+    HOMEAXIS_DO_BIT(Z);
+
+  if (doaxis & (1<<axis)) {
+    current_position[axis] = 0;
+    plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]);
+    destination[axis] = 1.5 * XYZ_CONFIG(float,max_length,axis) * XYZ_CONFIG(byte,home_dir,axis);
+    feedrate = homing_feedrate[axis];
+    plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate/60, active_extruder);
+    st_synchronize();
+   
+    current_position[axis] = 0;
+    plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]);
+    destination[axis] = -XYZ_CONFIG(float,home_retract_mm,axis) * home_dir[axis];
+    plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate/60, active_extruder);
+    st_synchronize();
+   
+    destination[axis] = 2*home_retract_mm[axis] * home_dir[axis];
+    feedrate = homing_feedrate[axis]/2 ; 
+    plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate/60, active_extruder);
+    st_synchronize();
+   
+    axis_is_at_home(axis);                                     
+    destination[axis] = current_position[axis];
+    feedrate = 0.0;
+    endstops_hit_on_purpose();
   }
+}
+#define HOMEAXIS(LETTER) homeaxis(LETTER##_AXIS)
 
 void process_commands()
 {