Added gen6 deluxe.

diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
index 1818b0cc21818ffbfa9ca7898b3ea71e094ed78d..035928ba89b9da635d2ebf921c64df18a0e425f0 100644 (file)
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@@ -8,12 +8,12 @@
 //User specified version info of THIS file to display in [Pronterface, etc] terminal window during startup.
 //Implementation of an idea by Prof Braino to inform user that any changes made
 //to THIS file by the user have been successfully uploaded into firmware.
-#define STRING_VERSION_CONFIG_H "2012-02-08j" //Personal revision number for changes to THIS file.
-#define STRING_CONFIG_H_AUTHOR "scuba82" //Who made the changes.
+#define STRING_VERSION_CONFIG_H "2012-02-25" //Personal revision number for changes to THIS file.
+#define STRING_CONFIG_H_AUTHOR "erik" //Who made the changes.
 
 // This determines the communication speed of the printer
-//#define BAUDRATE 250000
-#define BAUDRATE 115200
+#define BAUDRATE 250000
+//#define BAUDRATE 115200
 
 //// The following define selects which electronics board you have. Please choose the one that matches your setup
 // Gen7 custom (Alfons3 Version) = 10 "https://github.com/Alfons3/Generation_7_Electronics"
@@ -22,12 +22,13 @@
 // MEGA/RAMPS up to 1.2 = 3
 // RAMPS 1.3 = 33 (Power outputs: Extruder, Bed, Fan)
 // RAMPS 1.3 = 34 (Power outputs: Extruder0, Extruder1, Bed)
-// Gen6 = 
+// Gen6 = 5
+// Gen6 deluxe = 51
 // Sanguinololu 1.2 and above = 62
 // Ultimaker = 7
 // Teensylu = 8
 // Gen3+ =9
-#define MOTHERBOARD 33
+#define MOTHERBOARD 51
 
 //===========================================================================
 //=============================Thermal Settings  ============================
@@ -186,9 +187,9 @@ const bool Z_ENDSTOPS_INVERTING = false; // set to true to invert the logic of t
 
 //LCD and SD support
 //#define ULTRA_LCD  //general lcd support, also 16x2
-#define SDSUPPORT // Enable SD Card Support in Hardware Console
+//#define SDSUPPORT // Enable SD Card Support in Hardware Console
 
-#define ULTIPANEL
+//#define ULTIPANEL
 #ifdef ULTIPANEL
   #define NEWPANEL  //enable this if you have a click-encoder panel
   #define SDSUPPORT

diff --git a/Marlin/pins.h b/Marlin/pins.h
index bd6535e4d7b42104ed3ab1cef22f34ae49840407..69afa18b4c4376eae6a10231c7f6cdce459ce5e9 100644 (file)
--- a/Marlin/pins.h
+++ b/Marlin/pins.h
@@ -475,7 +475,7 @@
 * Gen6 pin assignment
 *
 ****************************************************************************************/
-#if MOTHERBOARD == 5
+#if MOTHERBOARD == 5 || MOTHERBOARD == 51
 #define KNOWN_BOARD 1
 
 #ifndef __AVR_ATmega644P__
@@ -509,13 +509,19 @@
     #define E0_ENABLE_PIN    3    //Added @ EJE Electronics 20100715
     #define TEMP_0_PIN      5     //changed @ rkoeppl 20110410
     #define TEMP_1_PIN      -1    //changed @ rkoeppl 20110410
+
+
     #define TEMP_2_PIN      -1    //changed @ rkoeppl 20110410
     #define HEATER_0_PIN    14    //changed @ rkoeppl 20110410
     #define HEATER_1_PIN    -1
     #define HEATER_2_PIN    -1
+    #if MOTHERBOARD == 51
     #define HEATER_BED_PIN  -1    //changed @ rkoeppl 20110410
     #define TEMP_BED_PIN    -1    //changed @ rkoeppl 20110410
-    
+    #else
+    #define HEATER_BED_PIN   1    //changed @ rkoeppl 20110410
+    #define TEMP_BED_PIN     0    //changed @ rkoeppl 20110410
+    #endif
     #define SDPOWER          -1
     #define SDSS          17
     #define LED_PIN         -1    //changed @ rkoeppl 20110410