Move Z-offset one line above and add (mm) to the label

diff --git a/Cura/gui/preferencesDialog.py b/Cura/gui/preferencesDialog.py
index ba7546c3f8af7e7355647bd664a89b8f18c34709..fd4b209ef0a0bf2b3e7def55549fd15a6b5b8c2e 100644 (file)
--- a/Cura/gui/preferencesDialog.py
+++ b/Cura/gui/preferencesDialog.py
@@ -86,8 +86,8 @@ class machineSettingsDialog(wx.Dialog):
                        configBase.SettingRow(left, 'machine_width', index=idx)
                        configBase.SettingRow(left, 'machine_depth', index=idx)
                        configBase.SettingRow(left, 'machine_height', index=idx)
-                       configBase.SettingRow(left, 'extruder_amount', index=idx)
                        configBase.SettingRow(left, 'extruder_z_offset', index=idx)
+                       configBase.SettingRow(left, 'extruder_amount', index=idx)
                        configBase.SettingRow(left, 'has_heated_bed', index=idx)
                        configBase.SettingRow(left, 'machine_center_is_zero', index=idx)
                        configBase.SettingRow(left, 'machine_shape', index=idx)

diff --git a/Cura/util/profile.py b/Cura/util/profile.py
index fe700d40623018c33b04be455f265c1b59ab381b..0c25bb00e7119d58359e311a7e9fb13f21161af9 100644 (file)
--- a/Cura/util/profile.py
+++ b/Cura/util/profile.py
@@ -509,7 +509,7 @@ setting('extruder_offset_x2', '0.0', float, 'machine', 'hidden').setLabel(_("Off
 setting('extruder_offset_y2', '0.0', float, 'machine', 'hidden').setLabel(_("Offset Y"), _("The offset of your tertiary extruder compared to the primary."))
 setting('extruder_offset_x3', '0.0', float, 'machine', 'hidden').setLabel(_("Offset X"), _("The offset of your forth extruder compared to the primary."))
 setting('extruder_offset_y3', '0.0', float, 'machine', 'hidden').setLabel(_("Offset Y"), _("The offset of your forth extruder compared to the primary."))
-setting('extruder_z_offset', '0.0', float, 'machine', 'hidden').setLabel(_("Z-Offset"), _("This value will be added to the Z coordinate of every line in the output G-Code to compensate for a badly calibrate Z height endstop."))
+setting('extruder_z_offset', '0.0', float, 'machine', 'hidden').setLabel(_("Z-Offset (mm)"), _("This value will be added to the Z coordinate of every line in the output G-Code to compensate for a badly calibrate Z height endstop."))
 setting('steps_per_e', '0', float, 'machine', 'hidden').setLabel(_("E-Steps per 1mm filament"), _("Amount of steps per mm filament extrusion. If set to 0 then this value is ignored and the value in your firmware is used."))
 setting('serial_port', 'AUTO', str, 'machine', 'hidden').setLabel(_("Serial port"), _("Serial port to use for communication with the printer"))
 setting('serial_port_auto', '', str, 'machine', 'hidden')