Change the bottom cutoff from a float-spinner to a normal input box, as the spinner...

diff --git a/Cura/gui/mainWindow.py b/Cura/gui/mainWindow.py
index 1c143f619ffebcf801a874abc89000ff866c5fbf..de4196dc51ad1673d78a5d5e3b832b912accac1d 100644 (file)
--- a/Cura/gui/mainWindow.py
+++ b/Cura/gui/mainWindow.py
@@ -658,7 +658,7 @@ class normalSettingsPanel(configBase.configPanelBase):
                c = configBase.SettingRow(right, "Initial layer thickness (mm)", 'bottom_thickness', '0.0', 'Layer thickness of the bottom layer. A thicker bottom layer makes sticking to the bed easier. Set to 0.0 to have the bottom layer thickness the same as the other layers.')
                validators.validFloat(c, 0.0)
                validators.warningAbove(c, lambda : (float(profile.getProfileSetting('nozzle_size')) * 3.0 / 4.0), "A bottom layer of more then %.2fmm (3/4 nozzle size) usually give bad results and is not recommended.")
-               c = configBase.SettingRow(right, "Cut off object bottom (mm)", 'object_sink', 0.05, 'Sinks the object into the platform, this can be used for objects that do not have a flat bottom and thus create a too small first layer.')
+               c = configBase.SettingRow(right, "Cut off object bottom (mm)", 'object_sink', '0.00', 'Sinks the object into the platform, this can be used for objects that do not have a flat bottom and thus create a too small first layer.')
                validators.validFloat(c, 0.0)
                configBase.settingNotify(c, lambda : self.GetParent().GetParent().GetParent().preview3d.Refresh())
                c = configBase.SettingRow(right, "Duplicate outlines", 'enable_skin', False, 'Skin prints the outer lines of the prints twice, each time with half the thickness. This gives the illusion of a higher print quality.')