Update to mini quick print settings.

diff --git a/Cura/gui/simpleMode.py b/Cura/gui/simpleMode.py
index 51f9a1c71ba730c7dd5a16368f9cc17b53357278..faf0c92c3b5821bda0a55673aa215a5bc71b007c 100644 (file)
--- a/Cura/gui/simpleMode.py
+++ b/Cura/gui/simpleMode.py
@@ -103,9 +103,11 @@ class simpleModePanel(wx.Panel):
                        put('layer0_width_factor', '125')
                        put('travel_speed', '175')
                        put('skirt_minimal_length', '250')
-                       put('cool_min_feedrate', '10')
                        put('brim_line_count', '10')
                        put('raft_airgap', '0.5')
+                       put('bottom_layer_speed', '15')
+                       put('fan_full_height', '0.5')
+                       put('retraction_minimal_extrusion', '0.005')
                        if self.printSupport.GetValue():
                                put('support', _("Everywhere"))
                                put('support_type', 'Lines')
@@ -117,13 +119,10 @@ class simpleModePanel(wx.Panel):
                                put('platform_adhesion', 'Brim')
                        if self.printMaterialHIPS.GetValue() or self.printMaterialABS.GetValue():
                                put('print_temperature', '240')
+                               put('print_bed_temperature', '110')
                                put('solid_layer_thickness', '0.8')
                                put('retraction_amount', '1')
-                               put('bottom_layer_speed', '25')
-                               put('cool_min_layer_time', '15')
-                               put('fan_full_height', '0.5')
                                put('fan_speed', '40')
-                               put('fan_speed_max', '50')
                                put('start.gcode', """;This Gcode has been generated specifically for the LulzBot Mini
 ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
 ;Filament Diameter: {filament_diameter}
@@ -196,45 +195,54 @@ G90                             ; absolute positioning
 ;{profile_string}
 """)
                                if self.printMaterialHIPS.GetValue():
-                                       put('print_bed_temperature', '97')
+                                       put('fan_speed_max', '50')
                                        if self.printTypeLow.GetValue():
                                                put('layer_height', '0.38')
-                                               put('print_speed', '85')
+                                               put('print_speed', '50')
                                                put('infill_speed', '70')
                                                put('inset0_speed', '40')
                                                put('insetx_speed', '45')
+                                               put('cool_min_layer_time', '15')
+                                               put('cool_min_feedrate', '10')
                                        if self.printTypeNormal.GetValue():
                                                put('layer_height', '0.25')
                                                put('print_speed', '50')
-                                               put('infill_speed', '70')
-                                               put('inset0_speed', '40')
-                                               put('insetx_speed', '45')
+                                               put('infill_speed', '60')
+                                               put('inset0_speed', '30')
+                                               put('insetx_speed', '35')
+                                               put('cool_min_layer_time', '15')
+                                               put('cool_min_feedrate', '10')
                                        if self.printTypeHigh.GetValue():
-                                               put('layer_height', '0.16')
+                                               put('layer_height', '0.18')
                                                put('print_speed', '30')
-                                               put('infill_speed', '50')
+                                               put('infill_speed', '30')
                                                put('inset0_speed', '20')
                                                put('insetx_speed', '25')
+                                               put('cool_min_layer_time', '20')
+                                               put('cool_min_feedrate', '5')
                                if self.printMaterialABS.GetValue():
-                                       put('print_bed_temperature', '104')
+                                       put('fan_speed_max', '60')
                                        if self.printTypeLow.GetValue():
                                                put('layer_height', '0.38')
                                                put('print_speed', '85')
-                                               put('infill_speed', '65')
-                                               put('inset0_speed', '45')
+                                               put('infill_speed', '60')
+                                               put('inset0_speed', '50')
                                                put('insetx_speed', '55')
+                                               put('cool_min_feedrate', '10')
                                        if self.printTypeNormal.GetValue():
                                                put('layer_height', '0.25')
                                                put('print_speed', '50')
                                                put('infill_speed', '55')
                                                put('inset0_speed', '45')
                                                put('insetx_speed', '50')
+                                               put('cool_min_feedrate', '10')
                                        if self.printTypeHigh.GetValue():
                                                put('layer_height', '0.18')
                                                put('print_speed', '50')
                                                put('infill_speed', '40')
                                                put('inset0_speed', '30')
                                                put('insetx_speed', '35')
+                                               put('cool_min_feedrate', '5')
                        elif self.printMaterialPLA.GetValue():
                                put('print_temperature', '205')
                                put('print_bed_temperature', '60')
@@ -242,11 +250,7 @@ G90                             ; absolute positioning
                                put('print_speed', '50')
                                put('retraction_amount', '1.5')
                                put('bottom_layer_speed', '15')
-                               put('infill_speed', '40')
-                               put('inset0_speed', '30')
-                               put('insetx_speed', '35')
                                put('cool_min_layer_time', '20')
-                               put('fan_full_height', '0.5')
                                put('fan_speed', '75')
                                put('fan_speed_max', '100')
                                put('start.gcode', """;This Gcode has been generated specifically for the LulzBot Mini
@@ -321,10 +325,22 @@ G90                                          ; absolute positioning
 """)
                                if self.printTypeLow.GetValue():
                                        put('layer_height', '0.38')
+                                       put('cool_min_feedrate', '10')
+                                       put('infill_speed', '40')
+                                       put('inset0_speed', '30')
+                                       put('insetx_speed', '35')
                                if self.printTypeNormal.GetValue():
                                        put('layer_height', '0.25')
+                                       put('cool_min_feedrate', '10')
+                                       put('infill_speed', '40')
+                                       put('inset0_speed', '30')
+                                       put('insetx_speed', '35')
                                if self.printTypeHigh.GetValue():
-                                       put('layer_height', '0.14')                             
+                                       put('layer_height', '0.14')
+                                       put('cool_min_feedrate', '5')
+                                       put('infill_speed', '30')
+                                       put('inset0_speed', '25')
+                                       put('insetx_speed', '27')
 ### LulzBot TAZ slice settings for use with the simple slice selection.
                if profile.getMachineSetting('machine_type') == 'lulzbot_TAZ':
                        put('filament_diameter', '2.85')